Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4020 Publications
2023 | Conference Paper | LibreCat-ID: 44320
I. Hami Dindar, N. Lutters, and E. Kenig, “Wässrige Glucosaminlösung als neues Lösungsmittel zur CO2-Abscheidung ,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion, Frankfurt am Main.
LibreCat
2023 | Conference Paper | LibreCat-ID: 34171
R.-S. Götte and J. Timmermann, “Estimating States and Model Uncertainties Jointly by a Sparsity Promoting UKF,” in 12th IFAC Symposium on Nonlinear Control Systems (NOLCOS 2022), Canberra, Australien, 2023, vol. 56, no. 1, pp. 85–90, doi: https://doi.org/10.1016/j.ifacol.2023.02.015.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44382
I. Gräßler, D. Wiechel, A.-S. Koch, T. Sturm, and T. Markfelder, “Methodology for Certification-Compliant Effect-Chain Modeling,” Systems, vol. 11, no. 3, Art. no. 154, 2023, doi: 10.3390/systems11030154.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44390
C. Link, K. Malena, S. Gausemeier, and A. Trächtler, “Simulation Environment for Traffic Control Systems Targeting Mixed Autonomy Traffic Scenarios,” presented at the 9th International Conference on Vehicle Technology and Intelligent Transport Systems (VEHITS 2023), Prague, Czech Republic, 2023, doi: 10.5220/0011987600003479.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 44103
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation),” presented at the Annual Meeting of the German Rheological Society (DRG) , Berlin, 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 44509
A. Kruse, Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion am Beispiel des Lasersinterns, vol. 27. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44521
J. Wurst, T. Steinhoff, I. Mozgova, T. Hassel, and R. Lachmayer, “Aspects of a Sustainability Focused Comparison of the Wire Arc Additive Manufacturing (WAAM) and the Laser Powder Bed Fusion (LPBF) Process,” 2023, doi: 10.1007/978-981-19-9205-6_9.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44522
J. Wurst, D. Rosemann, I. Mozgova, and R. Lachmayer, “Concept and Implementation of a Student Design Project for the Development of Sustainable Products,” 2023, doi: 10.1007/978-3-031-28839-5_88.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 35536
J. Kowatz, D. Teutenberg, and G. Meschut, “Optimization of inductive fast-curing of epoxy adhesive by model-based kinetics,” International Journal of Adhesion and Adhesives, vol. 124, 2023, doi: https://doi.org/10.1016/j.ijadhadh.2023.103392.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44228
A. H. J. Salten, M. Al Trjman, G. Meschut, and E. Y. Kenig, “Simulation des „viscous fingering“ Effektes in Klebverbindungen,” presented at the Jahrestreffen der DECHEMA Fachgruppen Aerosoltechnik, Gasreingigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44227
M. Al Trjman, G. Meschut, A. H. J. Salten, and E. Y. Kenig, “Methodenentwicklung zur Simulation des Viscous Fingering in Klebverbindungen von stahlintensiven Mischbaustrukturen,” presented at the 23. Kolloquium Gemeinsame Forschung in der Klebtechnik, Frankfurt am Main, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44672 | 
A. Bender, “Model-based condition monitoring of piezoelectric bending actuators,” Sensors and Actuators A: Physical, vol. 357, Art. no. 114399, 2023, doi: 10.1016/j.sna.2023.114399.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 44687
I. Gräßler, C. Oleff, D. Preuß, and A.-S. Koch, “Resilient Requirements Engineering,” Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 118, no. 4, pp. 222–225, 2023, doi: 10.1515/zwf-2023-1030.
LibreCat
| DOI
2023 | Bachelorsthesis | LibreCat-ID: 44101
F. Temborius and M. Neukötter, Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln. 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 42997
A. Almohammad and M. Neukötter, Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen . 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 42999
D. Bünder and M. Neukötter, Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells. 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 42995
M. Al Mamoun and M. Neukötter, Evaluation of self-built low-budget particle sensors (Study Project). 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44888
P. Lenz and R. Mahnken, “Thermo‐chemo‐mechanical modelling of a curing process combined with mean‐field homogenization methods at large strains,” PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200214.
LibreCat
| DOI
2023 | Preprint | LibreCat-ID: 44887
C. Cheng, C. Song, R. Mahnken, Z. Yuan, L. Yu, and X. Ju, “A Non-Linear Mean-Field Debonding Model at Large Strains for the Analysis of Fibre Kinking in Ud Composites.” Elsevier BV, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44891
H. Westermann and R. Mahnken, “A thermodynamic framework for the phase‐field approach considering carbide precipitation during phase transformations,” PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200080.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44892
A. Hamdoun and R. Mahnken, “A finite strain gradient theory for viscoplasticity by means of micromorphic regularization,” PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200074.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44502
M. Ostermann et al., “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility,” in Towards the New Normal in Mobility, Duisburg, 2023, doi: 10.1007/978-3-658-39438-7_25.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44890
A. Tchomgue Simeu and R. Mahnken, “Goal‐oriented adaptivity based on a model hierarchy of mean‐field and full‐field homogenization methods in elasto‐plasticity,” PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200053.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 37200
S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, and T. Tröster, “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709,” Crystals, vol. 13, no. 2, Art. no. 157, 2023, doi: 10.3390/cryst13020157.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 41492
S. Pramanik et al., “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy,” Powders, vol. 2, no. 1, pp. 59–74, 2023, doi: 10.3390/powders2010005.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43441
M. Šlapáková et al., “3D-structure of intermetallic interface layer in Al–steel clad material,” Vacuum, vol. 212, Art. no. 112043, 2023, doi: 10.1016/j.vacuum.2023.112043.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 45360
M. Haase et al., “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,” in Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44078
A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,” Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi: 10.1016/j.jmatprotec.2023.117991.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 45557
M. S. Rossel and G. Meschut, “Prozesskettensimulation für das Clinchen mit beweglicher Matrize,” BLECHE+ROHRE+PROFILE, vol. 02/2023, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 45663
T. Schmolke, C. Brunner-Schwer, M. Biegler, M. Rethmeier, and G. Meschut, “On Welding of High-Strength Steels Using Laser Beam Welding and Resistance Spot Weld Bonding with Emphasis on Seam Leak Tightness ,” Journal of Manufacturing and Materials Processing, vol. 7, no. 3, 2023, doi: 10.3390/jmmp7030116.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 45757
R. Mahnken, “Derivation of third order Runge–Kutta methods (ELDIRK) by embedding of lower order implicit time integration schemes for local and global error estimation,” Computational Mechanics, 2023, doi: 10.1007/s00466-023-02347-2.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 45782 |
J. Grenz et al., “Integrating Prospective LCA in the Development of Automotive Components,” Sustainability, vol. 15, no. 13, Art. no. 10041, 2023, doi: 10.3390/su151310041.
LibreCat
| Files available
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 45877
C. Brunner-Schwer et al., “A life cycle assessment of joining processes in the automotive industry, illustrated by the example of an EV battery case,” presented at the Lasers in Manufacturing Conference 2023, Munich, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 45661
I. Gräßler and D. Preuß, “Automatisierte Abhängigkeitsanalyse von Anforderungen zur Wirkkettenmodellierung,” in Stuttgarter Symposium für Produktentwicklung SSP 2023, Stuttgart, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46502
I. Gräßler and D. Wiechel, “Customized impact analyses for technical engineering changes,” presented at the 18th Annual System of Systems Engineering Conference (SoSe), Lille, 2023, doi: 10.1109/sose59841.2023.10178484.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46503
S. Pramanik, K.-P. Hoyer, and M. Schaper, “Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples,” Rapid Prototyping Journal, vol. 29, no. 6, pp. 1257–1269, 2023, doi: 10.1108/rpj-06-2022-0190.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46507
S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, and K.-P. Hoyer, “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures,” Advanced Engineering Materials, vol. 25, no. 14, 2023, doi: 10.1002/adem.202201850.
LibreCat
| DOI
2023 | Preprint | LibreCat-ID: 46504
A. Andreiev, K.-P. Hoyer, F. Hengsbach, M. Haase, and M. Schaper, “Powder Bed Fusion of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and Challenges.” Elsevier BV, 2023, doi: 10.2139/ssrn.4369485.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 42459
M. Ostermann, J. Behm, T. Marten, and T. Tröster, “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen,” presented at the WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, Stuttgart, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 45602 |
Y. Karakaya, H. Somnitz, A. Hermsen, M. Gonchikzhapov, and T. Kasper, “Revisiting the initial reaction rates for TMS combustion and a new evidence for metastable silica nanoparticles in the gas-phase synthesis,” Applications in Energy and Combustion Science, vol. 14, Art. no. 100152, 2023, doi: 10.1016/j.jaecs.2023.100152.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46451
I. Gräßler, I. Mozgova, J. Pottebaum, M. Ott, P. Jung, and P. Hesse, “Handling of uncertainties in the design of sustainable Additive Manufacturing products by merging Design-for-X and Scenario-Technique,” in Procedia CIRP ICME, Gulf of Naples, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 46691
F. Dahms and W. Homberg, “Analysis and Modelling of the Deformation in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming Process,” in Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 46483
T. Borgert, M. Henke, and W. Homberg, “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 147, 2023, doi: 10.3390/jmmp7040147.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46762
A. Tchomgue Simeu and R. Mahnken, “Mesh- and model adaptivity for elasto-plastic mean-field and full-field homogenization based on downwind and upwind approximations,” 2023, doi: 10.23967/admos.2023.054.
LibreCat
| DOI
2023 | Book | LibreCat-ID: 46812
M. S. Rossel and G. Meschut, Methodenentwicklung zur verbesserten Prognosegüte beim Clinchen mit beweglicher Matrize in der numerischen Fügeprozesssimulation, vol. 598. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 46815 |
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,” Progress in Additive Manufacturing, 2023, doi: 10.1007/s40964-023-00501-z.
LibreCat
| DOI
| Download (ext.)
2023 | Preprint | LibreCat-ID: 43049 |
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends.” Research Square Platform LLC, 2023.
LibreCat
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 45783
I. Kletetzka, “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” presented at the Mobility goes Additve, Berlin, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 43046 |
S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” The International Journal of Advanced Manufacturing Technology , 2023, doi: https://doi.org/10.1007/s00170-023-11243-1.
LibreCat
| DOI
| Download (ext.)
2023 | Bachelorsthesis | LibreCat-ID: 46861
S. Sajadi, Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46866
J. Troschitz, J. H. J. Vorderbrüggen, M. Gude, and G. Meschut, “Clinching and resistance spot welding of thermoplastic composites with metals using inserts as joining interfaces,” presented at the 23rd International Conference on Composite Materials (ICCM23), Belfast, UK, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 46870
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 28941
R. Afsahnoudeh, M. Holzmüller, F. Bader, W. Homberg, and E. Y. Kenig, “Numerische Untersuchung von Oberflächenstrukturierung zur Erhöhung der Effizienz von Kissenplatten-Wärmeübertragern,” presented at the Jahrestreffen der DECHEMA-Fachgruppen Computational Fluid Dynamics und Wärme- und Stoffübertragung, Frankfurt am Main, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46957
M. Ott, N. Meihöfener, and I. Mozgova, “Methodical Approach to Reducing Design Time by using Neural Networks in Early Stages of Concept Development,” in Proceedings of the 34rd Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, United States, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46490
I. Gräßler, A. M. Tusek, and D. Özcan, “Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends,” in Automation 2023, Baden-Baden, 2023, vol. 2419, pp. 863–874, doi: 10.51202/9783181024195-863.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 47122
S. Pramanik, J. T. Krüger, M. Schaper, and K.-P. Hoyer, “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution,” Metallurgical and Materials Transactions A, 2023, doi: 10.1007/s11661-023-07186-7.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46495
S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process,” The Journal of Adhesion, pp. 1–29, 2023, doi: 10.1080/00218464.2023.2245758.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46494
J. Freund et al., “Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints,” The Journal of Adhesion, pp. 1–31, 2023, doi: 10.1080/00218464.2023.2223475.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46813 |
M. C. Wohlleben, L. Muth, S. Peitz, and W. Sextro, “Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits,” 2023, doi: 10.1002/pamm.202300039.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 47116 |
O. K. Aimiyekagbon, A. Löwen, A. Bender, L. Muth, and W. Sextro, “Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System,” in Proceedings of the Asia Pacific Conference of the PHM Society 2023 , 2023, vol. 4, no. 1, doi: 10.36001/phmap.2023.v4i1.3596.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 44312
L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Echtzeitfähige Modellierung eines innovativen Drückwalzprozesses für die eigenschaftsgeregelte Bauteilfertigung,” at - Automatisierungstechnik, vol. 71, no. 1, pp. 68–81, 2023, doi: 10.1515/auto-2022-0106.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44315
L. Kersting, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg, and F. Walther, “Control strategy for angular gradations by means of the flow forming process,” 2023, doi: 10.21741/9781644902479-220.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44318
J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, and A. Trächtler, “Detection of phase transformation during plastic deformation of metastable austenitic steel AISI 304L by means of X-ray diffraction pattern analysis,” Metals, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 47234
B. Sehlmeyer, R. Kampmann, C. Scheidemann, T. Hemsel, and M. Getzlaff, “Burst Mode of Ultrasonic Resonant Oscillations for Stimulation and Destruction of Tumor Cells,” in Frühjahrstagung 2023, Sektion Kondensierte Materie (SKM), Dresden, 2023.
LibreCat
| Files available
2023 | Conference Abstract | LibreCat-ID: 47235
R. Kampmann, B. Sehlmeyer, C. Scheidemann, T. Hemsel, and M. Getzlaff, “Burst Mode Characteristics of an Ultrasonic Transducer for Treatment of Cancer Cells,” in Frühjahrstagung 2023, Sektion Kondensierte Marterie (SKM), Dresden, 2023.
LibreCat
| Files available
2023 | Journal Article | LibreCat-ID: 47536
T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster, “Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology,” International Journal of Material Forming, vol. 16, no. 6, Art. no. 59, 2023, doi: 10.1007/s12289-023-01785-w.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 47626
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in PARTEC International Congress on Particle Technology - Book of Abstracts, Nürnberg, 2023, pp. 172–176.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48577
M. Henkenjohann, U. Nolte, C. Henke, and A. Trächtler, “Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL,” 2023, doi: 10.1109/icuas57906.2023.10156317.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48585
B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material,” in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity., 2023, vol. 3, pp. 64–71, doi: 10.1007/978-3-031-41341-4_8.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46764 |
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, vol. 34.
LibreCat
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48597
S. Wu et al., “Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg,” presented at the 23rd International Conference on Composite Materials (ICCM23 2023), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 42238 |
A. Junker, N. Fittkau, J. Timmermann, and A. Trächtler, “Autonomous Golf Putting with Data-Driven and Physics-Based Methods,” presented at the 2022 Sixth IEEE International Conference on Robotic Computing (IRC), Naples, Italy, 2023, doi: 10.1109/irc55401.2022.00031.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 44316
J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, and A. Trächtler, “Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L,” presented at the The 14th International Conference on Numerical Methods in Industrial Forming Processes (Numiform 2023), Krakau, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48476
M. Hesse, J. Timmermann, and A. Trächtler, “Hybrid Optimal Control for Dynamical Systems using Gaussian Process Regression and Unscented Transform*,” 2023, doi: 10.23919/ecc57647.2023.10178368.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 48643
E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III: Challenges of lightweight design, vehicles, and rescuers,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, Bielefeld, Germany: transcript Verlag, 2023.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48672
V. Schöppner et al., “Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides,” presented at the 76th Annual Assembly of the International Institute of Welding (IIW), Singapur (Singapur), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48671
V. Schöppner et al., “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation,” Proceedings of the 2023 International Conference on Composite Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48665
V. Schöppner and T. Arndt, “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten,” Joining Plastics, no. 17, pp. 20–27, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48662
V. Schöppner and J. Petzke, “Dielectric Heating in the Vulcanization Process of Rubber Extrudates,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48663
E. Moritzer and C. Held, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” Essen (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48751
V. Schöppner et al., “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method,” Advanced Structured Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48754
V. Schöppner, L. Austermeier, and D. Trienens, “Verbesserung der Betriebspunktauslegung durch Schneckensimulation,” Wissenschaftlicher Arbeitskreis Kunststofftechnik, pp. 62–66, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48752
E. Moritzer and M. Scholle, “The main factors influencing glass fiber shortening in the processing of bulk molding compounds (BMC),” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48748
J. Köllermeier and V. Schöppner, “Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48749
S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48753
V. Schöppner, M. Frank, and C. W. T. Schall, “The Wave Must Be Right,” Plastic Insights, no. 7/2023, pp. 52–54, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48755
E. Moritzer and C. Held, “Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48781 |
L. Bathelt, M. Scurk, E. Djakow, C. Henke, and A. Trächtler, “Novel Straightening-Machine Design with Integrated Force Measurement for Straightening of High-Strength Flat Wire,” Sensors, vol. 23, no. 22, 2023, doi: 10.3390/s23229091.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 48095
T. Koers and B. Magyar, “Compensation of the Shrinkage Behavior Occurring in Cylindrical Components in the FDM Process,” in Macromolecular Symposia, Bucharest, Romania, 2023, vol. 411, no. 1, doi: https://doi.org/10.1002/masy.202200185.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48482 |
R.-S. Götte, J. N. Klusmann, and J. Timmermann, “Data-driven identification of disturbances using a sliding mode observer,” in Proceedings - 33. Workshop Computational Intelligence: Berlin, 23.-24. November 2023, Berlin, Germany, 2023, pp. 113–123, doi: 10.5445/KSP/1000162754.
LibreCat
| DOI
| Download (ext.)
2023 | Dissertation | LibreCat-ID: 48072
T. Borgert, Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten Recycling von Aluminiumschrotten. 2023.
LibreCat
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 48498
R. Afsahnoudeh, A. Wortmeier, M. Holzmüller, Y. XGong, W. Homberg, and E. Y. Kenig, “Thermo-hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis,” Energies, vol. 16, no. 21, 2023, doi: https://doi.org/10.3390/en16217284.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48570
C. Lenz, C. Henke, and A. Trächtler, “A Methodical Approach to Hybrid Modelling for Contextual Anomaly Detection on Time-Series Data,” 2023, doi: 10.1109/indin51400.2023.10218108.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48572
L. Bathelt, E. Djakow, C. Henke, and A. Trächtler, “Innovative self-learning disturbance compensation for straightening processes,” 2023, doi: 10.21741/9781644902479-216.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48001
L. Bathelt, E. Djakow, F. Dahms, C. Henke, A. Trächtler, and W. Homberg, “Neuartiger Ansatz zum Richten von zwei- und dreidimensionalen Fehlern an einem Federdraht,” presented at the Ilmenauer Federntag 2023, Ilmenau, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48571
S. Koppert, M. Bause, C. Henke, and A. Trächtler, “Learning the Automated Setup of Profile Wrapping Lines for New Products from Few Past Setups,” 2023, doi: 10.1109/indin51400.2023.10217972.
LibreCat
| DOI