Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).
We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.
4009 Publications
2023 | Conference Paper | LibreCat-ID: 42666
T. Schmolke et al., “Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes,” Frankfurt, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 42763
C. Nagel et al., “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden,” presented at the 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Frankfurt, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 42766
K. Tews, D. Teutenberg, and G. Meschut, “Experimental investigation of the fatigue behavior and calculation of the service life of adhesively bonded joints,” presented at the 46th Annual Meeting of the Adhesion Society, Orlando, USA, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 42872
J. Göddecke et al., “Experimental and numerical investigation of the damping properties of adhesively bonded tubular steel joints,” The Journal of Adhesion, pp. 1–31, 2023, doi: 10.1080/00218464.2023.2178909.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 42165
E. Penner, I. Caylak, and R. Mahnken, “Experimental Investigations of Carbon Fiber Reinforced Polymer Composites and Their Constituents to Determine Their Elastic Material Properties and Complementary Inhomogeneous Experiments with Local Strain Considerations,” Fibers and Polymers, 2023, doi: 10.1007/s12221-023-00122-x.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43095
P. Lenz and R. Mahnken, “Non-local integral-type damage combined to mean-field homogenization methods for composites and its parallel implementation,” Composite Structures, Art. no. 116911, 2023, doi: 10.1016/j.compstruct.2023.116911.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43464 | 
M. Ostermann et al., “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures,” Energies, vol. 16, no. 8, Art. no. 3371, 2023, doi: 10.3390/en16083371.
LibreCat
| DOI
| Download (ext.)
2023 | Mastersthesis | LibreCat-ID: 44100
S. K. Gunasagran and M. Neukötter, Automatisierung der Auswertung rheologischer Messungen (Studienarbeit). 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44102
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster),” presented at the International Congress on Rheology, Athens, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44182
L. Schmelzle, J. Mergheim, G. Possart, M. Striewe, and G. Meschut, “Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung,” presented at the 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44036
T. Borgert and W. Homberg, “Analysis of temperature effect on strength and microstructure in friction induced recycling process (FIRP),” presented at the ESAFORM 2023, Kraków, 2023, doi: 10.21741/9781644902479-211.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 42252 |
N. Mügge, A. Kronberg, M. Glushenkov, and E. Y. Kenig, “Untersuchung überlagerter Effekte von Druckverlust und Totvolumen durch Rekuperation am isobaren Expansionsmotor,” Chemie Ingenieur Technik, vol. 95, no. 5, 2023, doi: 10.1002/cite.202200243.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 43130
T. Schmolke, D. Teutenberg, and G. Meschut, “Investigation of the leak tightness of structural adhesive joints for use in battery housings considering mechanical and corrosive loads,” The Journal of Adhesion, 2023, doi: 10.1080/00218464.2023.2195556.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 42877
J. Göddecke and G. Meschut, “Damping Properties of Bonded Structures Under Dynamic Loading,” Orlando, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 36983 |
S. Josch, S. Jesinghausen, C. Dechert, and H.-J. Schmid, “Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems,” Rheologica Acta, 2023, doi: 10.1007/s00397-023-01383-2.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 43154
J. Wippermann et al., “Correction: Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint,” Welding in the World, 2023, doi: 10.1007/s40194-023-01499-2.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 43236
T. Rüther and H.-J. Schmid, “CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag),” presented at the DECHEMA Jahrestreffen PMT 2023, Paderborn, 2023.
LibreCat
| Files available
2023 | Conference Abstract | LibreCat-ID: 43280
N. Lutters, F. Buckmann, and E. Y. Kenig, “Zur experimentellen Untersuchung der Reinstoffkondensation in Kissenplatten-Wärmeübertragern,” presented at the Jahrestreffen der DECHEMA-Fachgruppen Computational Fluid Dynamics und Wärme- und Stoffübertragung, Frankfurt am Main, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 43371
D. Voswinkel, “Application of a new strategy for time-efficient laser treatment of galvanized steel substrates to improve the adhesion properties,” Journal of Manufacturing Processes, vol. 94, pp. 10–19, 2023, doi: /10.1016/j.jmapro.2023.03.056.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 43393
S. A. Bernemann, J. Maćkowiak, J. Maćkowiak, and E. Kenig, “Computerunterstützte Strömungsuntersuchung von landwirtschaftlichen Abfällen,” presented at the Jahrestreffen Dechema-Fachgruppen AT, GAS, MPH, PMT 2023 , Paderborn, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 41959
O. Grydin et al., “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips,” in Light Metals 2023, S. Broek, Ed. Cham: Springer Nature Switzerland, 2023, pp. 1031–1037.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 43111
C. Dechert, A. Kengni Nkouemou, and E. Y. Kenig, “Vergleichende Untersuchung der Wirkung verschiedener Mikrostrukturen auf die Flüssigkeitsausbreitung,” presented at the Jahrestreffen der Fachgruppen Fluidverfahrenstechnik und Adsorption, Frankfurt am Main, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44096
T. Mamedov, E. Schleicher, M. Schubert, T. Ehlert, E. Y. Kenig, and U. Hampel, “Experimental analysis of ship motion effects on the performance of an absorption column equipped with structured packings,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion, Frankfurt am Main, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44094
T. Ehlert, T. Mamedov, M. Schubert, and E. Y. Kenig, “Charakterisierung des Einflusses neigungsinduzierter Strömungsformen mit dem Ansatz der hydrodynamsichen Analogie,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion, Frankfurt am Main, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44095
T. Ehlert, N. Lutters, and E. Y. Kenig, “Modellierung des Randspalts in Strukturpackungskolonnen mit dem Ansatz der hydrodynamischen Analogien,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion, Frankfurt am Main, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44181
F. Beule, L. Schmelzle, D. Teutenberg, G. Possart, G. Meschut, and J. Mergheim, “Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen unter Crashbelastung,” presented at the 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Frankfurt, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44183
J. Kowatz, D. Teutenberg, and G. Meschut, “Weiterentwicklung der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von serienrelevanten Einflussfaktoren,” in 23. Kolloquium Gemeinsame Forschung in der Klebtechnik, Frankfurt a. M., 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 42515 |
E. Moritzer and F. Flachmann, “Morphological and mechanical properties of foamed thick-walled Wood-Plastic-Composite structures,” Journal of Cellular Plastics, vol. 59, no. 3, pp. 187–199, 2023, doi: 10.1177/0021955x231161175.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 44035
F. Dahms and W. Homberg, “Energy and Resource-efficient Forming of Gas Cylinders by Friction-Spinning,” presented at the ESAFORM 2023, Krakau, 2023, doi: 10.21741/9781644902479-208.
LibreCat
| Files available
| DOI
2023 | Journal Article | LibreCat-ID: 43391
A. Paul, E. Baumhögger, M.-O. Dewerth, I. Hami Dindar, G. Sonnenrein, and J. Vrabec, “Thermal conductivity of solid paraffins and several n-docosane compounds with graphite,” Journal of Thermal Analysis and Calorimetry, 2023, doi: 10.1007/s10973-023-12107-2.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43394
A. Paul et al., “Alterungsmechanismen von Haushaltskältegeräten,” Magdeburg, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 43034 |
S. Josch, S. Jesinghausen, and H.-J. Schmid, “Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete,” Applied Rheology, vol. 33, no. 1, 2023, doi: 10.1515/arh-2022-0140.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 43128
M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Powder Technology, vol. 422, Art. no. 118460, 2023, doi: 10.1016/j.powtec.2023.118460.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 39057
J. Wippermann et al., “Thermal influence of resistance spot welding on a nearby overmolded thermoplastic–metal joint,” Welding in the World, 2023, doi: 10.1007/s40194-023-01465-y.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44232
J. Wippermann, W. Koshukow, A. Liebsch, B. Kolbe, G. Meschut, and M. Gude, “Influence of plasma coating pretreatment on the adhesion of thermoplastics to metals,” Tagungsband Münchener Leichtbauseminar 2022, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44244
S. Ponusamy and H.-J. Schmid, “Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern,” presented at the Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik, Braunschweig, 2023.
LibreCat
| Files available
2023 | Conference Paper | LibreCat-ID: 44154
J. Lückenkötter, J. P. Leimbach, T. Stallmeister, T. Marten, and T. Tröster, “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector,” in Materials Research Proceedings, Krakow, Poland, 2023, vol. 28, pp. 249–258, doi: 10.21741/9781644902479-27.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43044
M. Holzmüller, M. Linnemann, W. Homberg, V. Psyk, V. Kräusel, and J. Kroos, “Proof of concept for incremental sheet metal forming by means of electromagnetic and electrohydraulic high-speed forming,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 11–18, doi: 10.21741/9781644902417-2.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43045
M. Knyazyev, M. Holzmüller, and W. Homberg, “Investigation of Pressure Fields Generated by Two Simultaneous Discharges in Liquid Initiated by Wires,” Journal of Manufacturing and Materials Processing, vol. 7, no. 1, Art. no. 40, 2023, doi: 10.3390/jmmp7010040.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44320
I. Hami Dindar, N. Lutters, and E. Kenig, “Wässrige Glucosaminlösung als neues Lösungsmittel zur CO2-Abscheidung ,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Adsoprtion, Frankfurt am Main.
LibreCat
2023 | Conference Paper | LibreCat-ID: 34171
R.-S. Götte and J. Timmermann, “Estimating States and Model Uncertainties Jointly by a Sparsity Promoting UKF,” in 12th IFAC Symposium on Nonlinear Control Systems (NOLCOS 2022), Canberra, Australien, 2023, vol. 56, no. 1, pp. 85–90, doi: https://doi.org/10.1016/j.ifacol.2023.02.015.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44382
I. Gräßler, D. Wiechel, A.-S. Koch, T. Sturm, and T. Markfelder, “Methodology for Certification-Compliant Effect-Chain Modeling,” Systems, vol. 11, no. 3, Art. no. 154, 2023, doi: 10.3390/systems11030154.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44390
C. Link, K. Malena, S. Gausemeier, and A. Trächtler, “Simulation Environment for Traffic Control Systems Targeting Mixed Autonomy Traffic Scenarios,” presented at the 9th International Conference on Vehicle Technology and Intelligent Transport Systems (VEHITS 2023), Prague, Czech Republic, 2023, doi: 10.5220/0011987600003479.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 44103
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation),” presented at the Annual Meeting of the German Rheological Society (DRG) , Berlin, 2023.
LibreCat
2023 | Dissertation | LibreCat-ID: 44509
A. Kruse, Entwicklung einer Methode zur Integration der Additiven Fertigung in die Serienproduktion am Beispiel des Lasersinterns, vol. 27. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44521
J. Wurst, T. Steinhoff, I. Mozgova, T. Hassel, and R. Lachmayer, “Aspects of a Sustainability Focused Comparison of the Wire Arc Additive Manufacturing (WAAM) and the Laser Powder Bed Fusion (LPBF) Process,” 2023, doi: 10.1007/978-981-19-9205-6_9.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44522
J. Wurst, D. Rosemann, I. Mozgova, and R. Lachmayer, “Concept and Implementation of a Student Design Project for the Development of Sustainable Products,” 2023, doi: 10.1007/978-3-031-28839-5_88.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 35536
J. Kowatz, D. Teutenberg, and G. Meschut, “Optimization of inductive fast-curing of epoxy adhesive by model-based kinetics,” International Journal of Adhesion and Adhesives, vol. 124, 2023, doi: https://doi.org/10.1016/j.ijadhadh.2023.103392.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44228
A. H. J. Salten, M. Al Trjman, G. Meschut, and E. Y. Kenig, “Simulation des „viscous fingering“ Effektes in Klebverbindungen,” presented at the Jahrestreffen der DECHEMA Fachgruppen Aerosoltechnik, Gasreingigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44227
M. Al Trjman, G. Meschut, A. H. J. Salten, and E. Y. Kenig, “Methodenentwicklung zur Simulation des Viscous Fingering in Klebverbindungen von stahlintensiven Mischbaustrukturen,” presented at the 23. Kolloquium Gemeinsame Forschung in der Klebtechnik, Frankfurt am Main, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44672 |
A. Bender, “Model-based condition monitoring of piezoelectric bending actuators,” Sensors and Actuators A: Physical, vol. 357, Art. no. 114399, 2023, doi: 10.1016/j.sna.2023.114399.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 44687
I. Gräßler, C. Oleff, D. Preuß, and A.-S. Koch, “Resilient Requirements Engineering,” Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 118, no. 4, pp. 222–225, 2023, doi: 10.1515/zwf-2023-1030.
LibreCat
| DOI
2023 | Bachelorsthesis | LibreCat-ID: 44101
F. Temborius and M. Neukötter, Polymere unter Dehnung: Untersuchung der Filamententstehung von Polymerblends und deren Instabilitätsentstehung durch Partikeln. 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 42997
A. Almohammad and M. Neukötter, Untersuchung dehnrheologischer Eigenschaften - Suspensionen auf Basis von Polymerlösungen . 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 42999
D. Bünder and M. Neukötter, Theoretische Beschreibung des Polymerverhaltens in Polymerlösungen und - schmelzen: Simulationen anhand des Rolie-Poly-Modells. 2023.
LibreCat
2023 | Mastersthesis | LibreCat-ID: 42995
M. Al Mamoun and M. Neukötter, Evaluation of self-built low-budget particle sensors (Study Project). 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44888
P. Lenz and R. Mahnken, “Thermo‐chemo‐mechanical modelling of a curing process combined with mean‐field homogenization methods at large strains,” PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200214.
LibreCat
| DOI
2023 | Preprint | LibreCat-ID: 44887
C. Cheng, C. Song, R. Mahnken, Z. Yuan, L. Yu, and X. Ju, “A Non-Linear Mean-Field Debonding Model at Large Strains for the Analysis of Fibre Kinking in Ud Composites.” Elsevier BV, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44891
H. Westermann and R. Mahnken, “A thermodynamic framework for the phase‐field approach considering carbide precipitation during phase transformations,” PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200080.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44892
A. Hamdoun and R. Mahnken, “A finite strain gradient theory for viscoplasticity by means of micromorphic regularization,” PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200074.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 44502
M. Ostermann et al., “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility,” in Towards the New Normal in Mobility, Duisburg, 2023, doi: 10.1007/978-3-658-39438-7_25.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44890
A. Tchomgue Simeu and R. Mahnken, “Goal‐oriented adaptivity based on a model hierarchy of mean‐field and full‐field homogenization methods in elasto‐plasticity,” PAMM, vol. 22, no. 1, 2023, doi: 10.1002/pamm.202200053.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 37200
S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, and T. Tröster, “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709,” Crystals, vol. 13, no. 2, Art. no. 157, 2023, doi: 10.3390/cryst13020157.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 41492
S. Pramanik et al., “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy,” Powders, vol. 2, no. 1, pp. 59–74, 2023, doi: 10.3390/powders2010005.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43441
M. Šlapáková et al., “3D-structure of intermetallic interface layer in Al–steel clad material,” Vacuum, vol. 212, Art. no. 112043, 2023, doi: 10.1016/j.vacuum.2023.112043.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 45360
M. Haase et al., “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,” in Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 44078
A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,” Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi: 10.1016/j.jmatprotec.2023.117991.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 45557
M. S. Rossel and G. Meschut, “Prozesskettensimulation für das Clinchen mit beweglicher Matrize,” BLECHE+ROHRE+PROFILE, vol. 02/2023, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 45663
T. Schmolke, C. Brunner-Schwer, M. Biegler, M. Rethmeier, and G. Meschut, “On Welding of High-Strength Steels Using Laser Beam Welding and Resistance Spot Weld Bonding with Emphasis on Seam Leak Tightness ,” Journal of Manufacturing and Materials Processing, vol. 7, no. 3, 2023, doi: 10.3390/jmmp7030116.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 45757
R. Mahnken, “Derivation of third order Runge–Kutta methods (ELDIRK) by embedding of lower order implicit time integration schemes for local and global error estimation,” Computational Mechanics, 2023, doi: 10.1007/s00466-023-02347-2.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 45782 |
J. Grenz et al., “Integrating Prospective LCA in the Development of Automotive Components,” Sustainability, vol. 15, no. 13, Art. no. 10041, 2023, doi: 10.3390/su151310041.
LibreCat
| Files available
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 45877
C. Brunner-Schwer et al., “A life cycle assessment of joining processes in the automotive industry, illustrated by the example of an EV battery case,” presented at the Lasers in Manufacturing Conference 2023, Munich, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 45661
I. Gräßler and D. Preuß, “Automatisierte Abhängigkeitsanalyse von Anforderungen zur Wirkkettenmodellierung,” in Stuttgarter Symposium für Produktentwicklung SSP 2023, Stuttgart, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46502
I. Gräßler and D. Wiechel, “Customized impact analyses for technical engineering changes,” presented at the 18th Annual System of Systems Engineering Conference (SoSe), Lille, 2023, doi: 10.1109/sose59841.2023.10178484.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46503
S. Pramanik, K.-P. Hoyer, and M. Schaper, “Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples,” Rapid Prototyping Journal, vol. 29, no. 6, pp. 1257–1269, 2023, doi: 10.1108/rpj-06-2022-0190.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46507
S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, and K.-P. Hoyer, “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures,” Advanced Engineering Materials, vol. 25, no. 14, 2023, doi: 10.1002/adem.202201850.
LibreCat
| DOI
2023 | Preprint | LibreCat-ID: 46504
A. Andreiev, K.-P. Hoyer, F. Hengsbach, M. Haase, and M. Schaper, “Powder Bed Fusion of Soft-Magnetic Iron-Silicon-Based Alloys: Advantages and Challenges.” Elsevier BV, 2023, doi: 10.2139/ssrn.4369485.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 42459
M. Ostermann, J. Behm, T. Marten, and T. Tröster, “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen,” presented at the WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, Stuttgart, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 45602 |
Y. Karakaya, H. Somnitz, A. Hermsen, M. Gonchikzhapov, and T. Kasper, “Revisiting the initial reaction rates for TMS combustion and a new evidence for metastable silica nanoparticles in the gas-phase synthesis,” Applications in Energy and Combustion Science, vol. 14, Art. no. 100152, 2023, doi: 10.1016/j.jaecs.2023.100152.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 46451
I. Gräßler, I. Mozgova, J. Pottebaum, M. Ott, P. Jung, and P. Hesse, “Handling of uncertainties in the design of sustainable Additive Manufacturing products by merging Design-for-X and Scenario-Technique,” in Procedia CIRP ICME, Gulf of Naples, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 46691
F. Dahms and W. Homberg, “Analysis and Modelling of the Deformation in the Manufacture of Flange-Contours by the Combined Friction-Spinning and Flow-Forming Process,” in Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023.
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 46483
T. Borgert, M. Henke, and W. Homberg, “Investigations on the Influences of the Thermomechanical Manufacturing of Aluminium Auxiliary Joining Elements,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 147, 2023, doi: 10.3390/jmmp7040147.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46762
A. Tchomgue Simeu and R. Mahnken, “Mesh- and model adaptivity for elasto-plastic mean-field and full-field homogenization based on downwind and upwind approximations,” 2023, doi: 10.23967/admos.2023.054.
LibreCat
| DOI
2023 | Book | LibreCat-ID: 46812
M. S. Rossel and G. Meschut, Methodenentwicklung zur verbesserten Prognosegüte beim Clinchen mit beweglicher Matrize in der numerischen Fügeprozesssimulation, vol. 598. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 46815 |
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,” Progress in Additive Manufacturing, 2023, doi: 10.1007/s40964-023-00501-z.
LibreCat
| DOI
| Download (ext.)
2023 | Preprint | LibreCat-ID: 43049 |
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler matrix adhesion and the effects of conditioning on tensile properties of laser sintered parts built with polyamide glass bead dry blends.” Research Square Platform LLC, 2023.
LibreCat
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 45783
I. Kletetzka, “Tensile Testing for Polymer AM - Best Pratice at the DMRC,” presented at the Mobility goes Additve, Berlin, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 43046 |
S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” The International Journal of Advanced Manufacturing Technology , 2023, doi: https://doi.org/10.1007/s00170-023-11243-1.
LibreCat
| DOI
| Download (ext.)
2023 | Bachelorsthesis | LibreCat-ID: 46861
S. Sajadi, Charakterisierung und Bewertung von flammgeschützten PA12 Pulvermischungen hinsichtlich der Verarbeitbarkeit im Lasersinter-Prozess. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46866
J. Troschitz, J. H. J. Vorderbrüggen, M. Gude, and G. Meschut, “Clinching and resistance spot welding of thermoplastic composites with metals using inserts as joining interfaces,” presented at the 23rd International Conference on Composite Materials (ICCM23), Belfast, UK, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 46870
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 28941
R. Afsahnoudeh, M. Holzmüller, F. Bader, W. Homberg, and E. Y. Kenig, “Numerische Untersuchung von Oberflächenstrukturierung zur Erhöhung der Effizienz von Kissenplatten-Wärmeübertragern,” presented at the Jahrestreffen der DECHEMA-Fachgruppen Computational Fluid Dynamics und Wärme- und Stoffübertragung, Frankfurt am Main, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46957
M. Ott, N. Meihöfener, and I. Mozgova, “Methodical Approach to Reducing Design Time by using Neural Networks in Early Stages of Concept Development,” in Proceedings of the 34rd Annual International Solid Freeform Fabrication Symposium 2023, Austin, Texas, United States, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46490
I. Gräßler, A. M. Tusek, and D. Özcan, “Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends,” in Automation 2023, Baden-Baden, 2023, vol. 2419, pp. 863–874, doi: 10.51202/9783181024195-863.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 47122
S. Pramanik, J. T. Krüger, M. Schaper, and K.-P. Hoyer, “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution,” Metallurgical and Materials Transactions A, 2023, doi: 10.1007/s11661-023-07186-7.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46495
S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process,” The Journal of Adhesion, pp. 1–29, 2023, doi: 10.1080/00218464.2023.2245758.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46494
J. Freund et al., “Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints,” The Journal of Adhesion, pp. 1–31, 2023, doi: 10.1080/00218464.2023.2223475.
LibreCat
| DOI