Please note that LibreCat no longer supports Internet Explorer versions 8 or 9 (or earlier).

We recommend upgrading to the latest Internet Explorer, Google Chrome, or Firefox.

2205 Publications


2017 | Journal Article | LibreCat-ID: 2241
T. Hoppe, D. Schanz, S. Sturm, and C. Sureth-Sloane, “Warum ist unser Steuersystem so komplex? Eine befragungsbasierte Analyse,” Die Wirtschaftsprüfung, vol. 70, no. 17, pp. 1026–1033, 2017.
LibreCat
 

2017 | Book | LibreCat-ID: 22419
T. Künneke and D. Zimmer, Funktionsintegration additiv gefertigter Dämpfungsstrukturen bei Biegeschwingungen. Springer Fachmedien Wiesbaden GmbH, 2017, pp. 61–74.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22420
S. Lammers et al., “Entwicklung und additive Herstellung einer Leichtbau-Rotorwelle für eine permanentmagneterregte Synchronmaschine,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 80–93.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22421
T. Lieneke, G. Adam, S. Josupeit, P. Delfs, and D. Zimmer, “Maßtoleranzen für die additive Fertigung: Experimentelle Untersuchungen für das Lasersintern,” in Proceedings of the 14th Rapid.Tech Conference, 2017, pp. 327–344.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22422
F. Knoop and T. Lieneke, “Dimensional Tolerances for Additive Manufacturing: Fused Deposition Modeling,” in Inside 3D Printing 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22425
T. Lieneke, V. Denzer, and D. Zimmer, “Geometrische Toleranzen für additive Fertigungsverfahren,” in 3. Summer School Toleranzmangement 2017, 2017, vol. 3.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22426
N. Eschner et al., “Kombination etablierter und additiver Fertigung: Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskette,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 112, no. 7–8, pp. 469–472, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22427
C. Piantsop Mbo’o, C. Lessmeier, D. Zimmer, and K. Hameyer, “Frequenzselektiver Schadensindikator für die Diagnose von Wälzlagerschäden im elektrischen Antriebsstrang,” antriebstechnik - Zeitschrift für Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen , vol. 56, no. 5, pp. 64–69, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22428
U. Brückner, M. Strop, and D. Zimmer, “Mehrmotorenantriebssysteme - Intelligente Betriebsstrategie,” antriebstechnik - Zeitschrift für Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen , vol. 56, no. 3, pp. 74–81, 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 22429
C. Lessmeier, Datenbasierte Zustandsüberwachung von Wälzlagerschäden in elektromechanischen Antriebssystemen. Shaker Verlag GmbH , 2017.
LibreCat
 

2017 | Report | LibreCat-ID: 2247 | OA
T. Hoppe, D. Schanz, S. Sturm, and C. Sureth-Sloane, 2016 Global MNC Tax Complexity Survey - Executive Summary. 2017.
LibreCat | Files available | DOI | Download (ext.)
 

2017 | Journal Article | LibreCat-ID: 22475
I. Mindt, “Chosen,” Zeitschrift für Anglistik und Amerikanistik, vol. 65, no. 3, pp. 339–353, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22476
I. Mindt, “Analyzing Corpus Data from Within,” Anglistik. International Journal of English Studies, vol. 28, no. 1, pp. 57–73, 2017.
LibreCat
 

2017 | Working Paper | LibreCat-ID: 2250 | OA
T. Hoppe, D. Schanz, S. Sturm, and C. Sureth-Sloane, What are the Drivers of Tax Complexity for Multinational Corporations? Evidence from 108 Countries. 2017.
LibreCat | Files available | DOI | Download (ext.)
 

2017 | Journal Article | LibreCat-ID: 22668
S. Ramakrishnan, G. Krainer, G. Grundmeier, M. Schlierf, and A. Keller, “Cation-Induced Stabilization and Denaturation of DNA Origami Nanostructures in Urea and Guanidinium Chloride,” Small, vol. 13, p. 1702100, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22669
B. Mosebach, B. Ozkaya, I. Giner, A. Keller, and G. Grundmeier, “Analysis of acid-base interactions at Al 2 O 3 (11-20) interfaces by means of single molecule force spectroscopy,” Applied Surface Science, vol. 420, pp. 296–302, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 2269
A. Mauleon, N. Roehl, and V. Vannetelbosch, “Constitutions and groups,” Games and Economic Behavior, vol. 107, pp. 135–152, 2017.
LibreCat | Files available | DOI
 

2017 | Journal Article | LibreCat-ID: 22694
R. Grothe, M. Wiesing, I. Giner, D. Meinderink, and G. Grundmeier, “Scanning Kelvin probe blister studies of the delamination of epoxy films on organosilane modified ZnMgAl alloy coated steel,” Materials and Corrosion, pp. 1314–1320, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22702
A. Bauer, D. Meinderink, I. Giner, H. Steger, J. Weitl, and G. Grundmeier, “Electropolymerization of acrylic acid on carbon fibers for improved epoxy/fiber adhesion,” Surface and Coatings Technology, pp. 128–135, 2017.
LibreCat | DOI
 

2017 | Bachelorsthesis | LibreCat-ID: 2272
V. Golke, Signaling und Screening - Abbau von Informationsasymmetrie. Universität Paderborn, 2017.
LibreCat
 

2017 | Bachelorsthesis | LibreCat-ID: 2273
L. Moselage, Das Reputationssystem als bedeutendes Instrument digitaler Märkte. Universität Paderborn, 2017.
LibreCat
 

2017 | Bachelorsthesis | LibreCat-ID: 2274
M. Z. Hennawi, Der Preis als Qualitätssignal. Universität Paderborn, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22745
M. C. Platenius, W. Sch{\"a}fer, A. Shaker, E. H{\"u}llermeier, and M. Becker, “Imprecise Matching of Requirements Specifications for Software~Services using Fuzzy Logic,” {Transactions on Software Engineering}, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22810
C. Plass, J. Gausemeier, and M. Drewel, “ Ansatz für den Weg in die Plattformökonomie – Das Geschäftsmodell-Technologie-Portfolio,” in Vorausschau und Technologieplanung, Symposium für Vorausschau und Technologieplanung, Band 374, 2017, vol. Band 374, pp. 291–304.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22811
D. Röltgen, F. Wortmann, H. Anacker, and R. Dumitrescu, “Identifikation von Potentialen für Augmented-Reality-basierte Produkt-Service-Systeme,” in 13. Symposium für Vorausschau und Technologieplanung, Band 374 , Berlin , 23. - 24. Nov. 2017, 2017, vol. 374.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22813
A. Albers, A. Kühn, and R. Dumitrescu, “Modellbasierte Entscheidungsunterstützung in der Produktgenerationenplanung,” in Proceedings of: Tag des Systems Engineering (TdSE), 8. - 10. Nov. 2017, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 22841
M. Wiesing and G. Grundmeier, “Lifshitz analysis of dispersion forces based on quantitative reflection electron energy loss spectroscopy,” Journal of Colloid and Interface Science, pp. 625–633, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22842
A. Bauer, G. Grundmeier, H. Steger, and J. Weitl, “Corrosive delamination processes of CFRP-aluminum alloy hybrid components,” Materials and Corrosion, pp. 98–105, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22845
P. Herre et al., “Deformation behavior of nanocrystalline titania particles accessed by complementary in situ electron microscopy techniques,” Journal of the American Ceramic Society, pp. 5709–5722, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22846
M. Wiesener et al., “Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting,” Materials and Corrosion, pp. 1028–1036, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22847
D. Peeters et al., “Nanostructured Fe2O3 Processing via Water-Assisted ALD and Low-Temperature CVD from a Versatile Iron Ketoiminate Precursor,” Advanced Materials Interfaces, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22848
M. Gebhard et al., “New amidinate complexes of indium(iii): promising CVD precursors for transparent and conductive In2O3 thin films,” Dalton Transactions, pp. 10220–10231, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22849
C. Hoppe, F. Mitschker, I. Giner, T. de los Arcos, P. Awakowicz, and G. Grundmeier, “Influence of organic surface chemistry on the nucleation of plasma deposited SiOxfilms,” Journal of Physics D: Applied Physics, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22860
M. Drewel, M. Frank, and J. Gausemeier, “Optionen des Maschinenbaus in der Plattformökonomie von morgen,” in Vorausschau und Technologieplanung, Symposium für Vorausschau und Technologieplanung, Band 374, 2017, vol. Band 374, pp. 361–380.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22861
A. Lipsmeier, T. Westermann, H. Anacker, and R. Dumitrescu, “Mechatronic Modularization of Intelligent Technical Systems,” in 21th International Conference on Engineering and Design (ICED17), 21. - 25. Aug. 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22863
A. Lipsmeier, H. Anacker, R. Dumitrescu, and A. Kühn, “Kundenorientierte Entwicklung von Intelligenten Technischen Systemen im Maschinenbau,” in Stuttgarter Symposium für Produktentwicklung SSP 2017, Stuttgart, 28. - 29. Jun. 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22864
C. Fechtelpeter, A. Kühn, R. Dumitrescu, and P. Ebbesmeyer, “Integrated technology transfer concept for fostering innovation in SMEs,” in Proceedings of the 26th International Association for Management of Technology Conference , 14. - 18. Mai 2017, IAMOT, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22865
M. Drewel, J. Gausemeier, A. Kluge, and C. Pierenkemper, “Erfolgsgarant digitale Plattform – Vorreiter Landwirtschaft,” in Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, Band 369, 2017, vol. 369, pp. 53–66.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22866
C. Fechtelpeter, M. Bansmann, R. Dumitrescu, and H. Anacker, “Implementation planning and transfer of technology induced scenarios of digitized work,” in Presentation and proceedings, Technology Transfer Society (T2S) Annual Conference, 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22867
T. Westermann, H. Anacker, and R. Dumitrescu, “Reifegradmodell für die Planung von Cyber-Physical Systems,” in Wissenschafts- und Industrieforum 2017 - Intelligente Technische Systeme, Band 369, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22868
F. Reinhart, A. Kühn, and R. Dumitrescu, “Schichtenmodell für die Entwicklung von Data Science Anwendungen im Maschinen- und Anlagenbau,” in Wissenschaftsforum Intelligente Technische Systeme (WInTeSys), 2017, pp. 321–334.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 22869
J. Roßmann et al., “ Integrierte Entwicklung komplexer Systeme mit modellbasierter Systemspezifikation und -simulation - Eine Fallstudie zur Sensorauslegung in der Raumfahrt,” in Wissenschaftsforum Intelligente Technische Systeme (WinTeSys), 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23001
C. Henke, J. Michael, C. Lankeit, and A. Trächtler, “Virtuelle Inbetriebnahme eines Fertigungszentrums,” in Tag des System Engineering, 2017, pp. 45–54.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23002
J. Holtkötter, J. Michael, and C. Henke, “Systematische Inbetriebnahme einer Prüfeinrichtung für Zugversuche,” in Virtuelle Instrumente in der Praxis 2017, 2017, vol. 22, pp. 62–65.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23003
S. Henning, P. Biemelt, K. Abdelgawad, S. Gausemeier, and A. Trächtler, “Modellbasierte Untersuchung der Zuverlässigkeit algorithmisch bestimmter kritischer Stellen in Straßennetzwerken,” in VDI/VDE (AUTOREG 2017), 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23004
A. Kohlstedt, P. Traphöner, S. Olma, K.-P. Jäker, and A. Trächtler, “Fast hybrid position / force control of a parallel kinematic load simulator for 6-DOF Hardware-in-the-Loop axle tests,” in 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2017, pp. 694–699.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23005
K. Xu, J. Timmermann, and A. Trächtler, “Nonlinear Model Predictive Control with Discrete Mechanics and Optimal Control,” in Proc. Advanced Intelligent Mechatronics (AIM), 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23006
K. Xu, J. Timmermann, and A. Trächtler, “Swing-up of the moving double pendulum on a cart with simulation based LQR-Trees,” in Proc. 20th IFAC World Congress, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23007
K. Abdelgawad, S. Henning, P. Biemelt, S. Gausemeier, and A. Trächtler, “Networked Driving Simulation for Future Autonomous and Cooperative Vehicle Systems,” in VDI/VDE (AUTOREG 2017), 2017.
LibreCat
 

2017 | Book Chapter | LibreCat-ID: 23008
M. Krüger, M. Borsig, U.-H. Damerow, M. Gräler, and A. Trächtler, “Model-Based Design of Self-Correcting Forming Processes,” in Math for the Digital Factory, Springer International Publishing, 2017, pp. 273–288.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23009
P. Traphöner, S. Olma, A. Kohlstedt, K.-P. Jäker, and A. Trächtler, “Universelle Entwicklungs- und Prüfumgebung für mechatronische Fahrzeugachsen,” in Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, 2017.
LibreCat
 

2017 | Book | LibreCat-ID: 23010
J. Gausemeier et al., Wissenschaftsforum Intelligente Technische Systeme (WInTeSys), vol. 369. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23011
C. Henke, J. Michael, C. Lankeit, and A. Trächtler, “A Holistic Approach for Virtual Commissioning of Intelligent Systems,” in Systems Conference 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23012
J. Michael, A. Hellweg, C. Henke, and A. Trächtler, “Dynamische Prozessplanung im Smart Home auf Basis von Mutliagentensystemen,” in Fachtagung Mechatronik 2017, 2017, vol. 12, pp. 18–23.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23013
A. Kohlstedt, S. Olma, P. Traphöner, K.-P. Jäker, and A. Trächtler, “Kinematics-based force/position control of a hexapod in a HiL axle test rig,” in 17. Internationales Stuttgarter Symposium, Band 2, 2017, vol. 2, pp. 379–392.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23014
A. T. Rüting, E. Block, and A. Trächtler, “Modellprädiktive Vorsteuerung für einen kinematisch redundanten hybridkinematischen Mechanismus im Industrieumfeld,” in Fachtagung Mechatronik 2017, 2017, vol. 12, pp. 250–255.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 23015
C. Schweers, Adaptive Sigma-Punkte- Filter-Auslegung zur Zustands- und Parameterschätzung an Black-Box- Modellen. Heinz Nixdorf Institut, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 23016
W. Poddubny, A. Trächtler, A. P. Warkentin, and M. Krüger, “Innovative Suspensions for Caterpillar Vehicles,” Russian Engineering Research, vol. 37, no. 6, pp. 485–489, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23017
S. Henning, P. Biemelt, K. Abdelgawad, S. Gausemeier, and A. Trächtler, “Methodology for Determining Critical Locations in Road Networks based on Graph Theory,” in IFAC World Congress 2017, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23018
A. Pai, “Sliding-Mode-Regler zur Kraft- und Positionsregelung eines Formgedächtnislegierung-Aktors,” in Regelungstechnisches Kolloquium, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23019
J. Papenfort et al., “Scientifc Automation: Hochpräzise Analysen direkt in der Steuerung,” in Wissenschaftsforum Intelligente Technische Systeme (WinTeSys) , 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 23020
M. Elattar, J. Jasperneite, A. Trächtler, and al et, “Reliable Multipath Communication Approach for Internet-based Cyber-physical Systems,” in 26th IEEE International Symposium on Industrial Electronics (ISIE), 2017.
LibreCat
 

2017 | Dissertation | LibreCat-ID: 23021
S. Knoop, Flachheitsbasierte Positionsregelungen für Parallelkinematiken am Beispiel eines hochdynamischen Hexapoden, vol. 364. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 23022
W. Poddubny, A. Trächtler, A. P. Warkentin, and M. Krüger, “Mechanisch - mathematisches Modell eines Kettenfahrzeuges für die Entwicklung innovativer Antriebs- und Federungssysteme (auf russ.),” Interbranch Scientific and Technical Magazine «Vestnik Mashinostroeniya» , 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 21690
G. Deppe, R. Koch, and M. Kaesberg, “Rational Decision-Making for the Beneficial Application of Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2597–2611.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21691
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21692
A. Kruse, T. Reiher, and R. Koch, “Integrating AM into existing companies - selection of existing parts for increase of acceptance,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2575–2584.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21693
U. Jahnke, R. Koch, and A. T. Oppermann, “Design for protection: Systematic approach to prevent product piracy during product development using AM ,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2481–2492.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21694
J. Büsching and R. Koch, “Ramp-Up-Management in Additive Manufacturing – Technology Integration in existing Business Processes,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2585–2596.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 21695
T. Reiher, S. Vogelsang, and R. Koch, “Computer integration for geometry generation for product optimization with Additive Manufacturing,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 903–921.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21697
G. Deppe and C. Lindemann, “Hybrid Manufacturing with Additive Manufacturing,” CECIMO Magazine, vol. 17, no. 11, pp. 28–29, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21704
T. Reiher, C. Lindemann, U. Jahnke, G. Deppe, and R. Koch, “Holistic approach for industrializing AM technology - from part selection to test and verification,” Progress in Additive Manufacturing, vol. 2, pp. 43–55, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21903
D. Rumlich, “CLIL theory and empirical reality – Two sides of the same coin?,” Journal of Immersion and Content-Based Language Education, vol. 5, no. 1, pp. 110–134, 2017.
LibreCat | DOI
 

2017 | Book Chapter | LibreCat-ID: 21925
D. Rumlich and S. Ahlers, “The rich environment of CLIL classes as an ideal setting for collaborative learning,” in Collaborative learning and new media, C. Ludwig and K. van de Poel, Eds. Frankfurt am Main, Germany: Lang, 2017, pp. 259–274.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 21938
F. Nüske, H. Wu, J.-H. Prinz, C. Wehmeyer, C. Clementi, and F. Noé, “Markov state models from short non-equilibrium simulations—Analysis and correction of estimation bias,” The Journal of Chemical Physics, 2017.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 21939
H. Wu, F. Nüske, F. Paul, S. Klus, P. Koltai, and F. Noé, “Variational Koopman models: Slow collective variables and molecular kinetics from short off-equilibrium simulations,” The Journal of Chemical Physics, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22042
C. Schumacher, V. Schöppner, and J. Guntermann, “Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 470–484, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 22045
F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat | DOI
 

2017 | Journal Article | LibreCat-ID: 22049
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, vol. 1, no. 1, pp. 108–114, 2017.
LibreCat
 

2017 | Journal Article | LibreCat-ID: 90
T. Isenberg, “Incremental Inductive Verification of Parameterized Timed Systems,” ACM Transactions on Embedded Computing Systems, no. 2, pp. 47:1-47:24, 2017.
LibreCat | Files available | DOI
 

2017 | Conference Paper | LibreCat-ID: 91
D. Szopinski, T. Schoormann, T. John, R. Knackstedt, and D. Kundisch, “How Software Can Support Innovating Business Models: A Taxonomy of Functions of Business Model Development Tools,” in Proceedings of the 23rd Americas Conference on Information Systems (AMCIS), Boston, USA, 2017.
LibreCat | Files available
 

2017 | Conference Abstract | LibreCat-ID: 92
D. Szopinski, T. Schoormann, T. John, R. Knackstedt, and D. Kundisch, “How Software Can Support Innovating Business Models: A Taxonomy of Functions of Business Model Development Tools,” in Bosch Business Model Innovation Summit 2017, Renningen, Germany, 2017.
LibreCat | Files available
 

2017 | Book Chapter | LibreCat-ID: 93
M. Geierhos and F. S. Bäumer, “Guesswork? Resolving Vagueness in User-Generated Software Requirements,” in Partiality and Underspecification in Information, Languages, and Knowledge, 1st ed., H. Christiansen, M. D. Jiménez-López, R. Loukanova, and L. S. Moss, Eds. Newcastle upon Tyne, UK: Cambridge Scholars Publishing, 2017, pp. 65–108.
LibreCat | Files available
 

2017 | Bachelorsthesis | LibreCat-ID: 94
M. Martens, Geschäftsmodelle elektronischer Handelsplattformen. Universität Paderborn, 2017.
LibreCat
 

2017 | Encyclopedia Article | LibreCat-ID: 95
D. Kundisch and T. John, “Geschäftsmodell-Modellierungssprache/Business Model Modeling Language,” in Enzyklopädie der Wirtschaftsinformatik, GITO, 2017.
LibreCat | Files available
 

2017 | Journal Article | LibreCat-ID: 9514
L. Huang et al., “Volumetric Generation of Optical Vortices with Metasurfaces,” ACS Photonics, pp. 338–346, 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 77
D. Szopinski, B. Jazayeri, G. Engels, and D. Kundisch, “On-The-Fly Computing: Ein Referenzmodell für individualisierte IT-Dienstleistungen in dynamischen Märkten,” in Proceedings of the Workshop Enterprise Architecture Management in Forschung und Praxis, INFORMATIK 2017, Chemnitz, Germany, 2017, pp. 2059–2066.
LibreCat | Files available
 

2017 | Conference (Editor) | LibreCat-ID: 7749
J. Carmona , G. Engels, and A. Kumar, Eds., Business Process Management - 15th International Conference, BPM 2017, Barcelona, Spain, September 10-15, 2017, Proceedings Lecture Notes in Computer Science, vol. 10445. Springer, 2017.
LibreCat
 

2017 | Conference (Editor) | LibreCat-ID: 7750
J. Carmona , G. Engels, and A. Kumar, Eds., Business Process Management Forum - BPM Forum 2017, Barcelona, Spain, September 10 - 15, 2017, Proceedings Lecture Notes in Business Information Processing 297, vol. 297. Springer, 2017.
LibreCat
 

2017 | Book (Editor) | LibreCat-ID: 7751
R. Spalazzese, M. Christin Platenius, S. Becker, P. Persson, and G. Engels, Eds., Message from the IoT-ASAP Chairs. 2017.
LibreCat | DOI
 

2017 | Conference (Editor) | LibreCat-ID: 7754
S. Hess and H. G. Fischer, Eds., Mensch und Computer 2017 - Usability Professionals. Tagungsband. Regensburg: Gesellschaft für Informatik e.V. und German UPA e.V., 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 7755
J. Mendes, J. Cunha, F. Duarte, G. Engels, J. Saraiva, and S. Sauer, “Towards systematic spreadsheet construction processes,” in 2017 IEEE/ACM 39th International Conference on Software Engineering Companion (ICSE-C), 2017.
LibreCat | DOI
 

2017 | Conference Paper | LibreCat-ID: 7767 | OA
J. Schumacher, “Sinnkonstruktion beim Erkunden von Mustern und Strukturen,” in Beiträge zum Mathematikunterricht 2017, 2017.
LibreCat | Download (ext.)
 

2017 | Conference Paper | LibreCat-ID: 78
B. Jazayeri and S. Schwichtenberg, “On-The-Fly Computing Meets IoT Markets - Towards a Reference Architecture,” in Proceedings of the International Conference on Software Architecture (ICSA) IoT-ASAP Workshop, 2017, pp. 120--127.
LibreCat | Files available | DOI
 

2017 | Conference Paper | LibreCat-ID: 79
A. Mäcker, M. Malatyali, F. Meyer auf der Heide, and S. Riechers, “Non-Clairvoyant Scheduling to Minimize Max Flow Time on a Machine with Setup Times,” in Proceedings of the 15th Workshop on Approximation and Online Algorithms (WAOA), 2017, vol. 10787, pp. 207–222.
LibreCat | Files available | DOI
 

2017 | Conference Paper | LibreCat-ID: 8073
M. Grieger, M. Fazal-Baqaie, G. Engels, and M. Klenke, “Concept-Based Engineering of Situation-Specific Migration Methods,” in Software Engineering 2017, 2017, pp. 65–66.
LibreCat
 

2017 | Mastersthesis | LibreCat-ID: 81
L. Luo, MultiSkipList: A Self-stabilizing Overlay Network with Monotonic Searchability maintained. Universität Paderborn, 2017.
LibreCat
 

2017 | Conference Paper | LibreCat-ID: 82
F. N. Abu-Khzam, S. Li, C. Markarian, F. Meyer auf der Heide, and P. Podlipyan, “Modular-Width: An Auxiliary Parameter for Parameterized Parallel Complexity,” in Proceedings of the 11th International Workshop on Frontiers in Algorithmics (FAW), 2017, pp. 139–150.
LibreCat | Files available | DOI
 

2017 | Conference Paper | LibreCat-ID: 8225
J. Mendes, J. Cunha, F. Duarte, G. Engels, J. Saraiva, and S. Sauer, “Systematic spreadsheet construction processes,” in Proceedings of the 39th International Conference on Software Engineering, {ICSE} 2017, Buenos Aires, Argentina, May 20-28, 2017 - Companion Volume, 2017, pp. 123–127.
LibreCat | DOI
 

Filters and Search Terms

year=2017

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed