91 Publications

Mark all

[91]
2021 | Misc | LibreCat-ID: 24202
Pawelczyk S, Jesinghausen S, Schmid H-J. Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention.; 2021.
LibreCat | Files available
 
[90]
2021 | Journal Article | LibreCat-ID: 25142
Kummert C, Schmid H-J, Risse L, Kullmer G. Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures. Journal of Materials Research. Published online 2021. doi:10.1557/s43578-021-00321-3
LibreCat | DOI
 
[89]
2021 | Journal Article | LibreCat-ID: 26095
Schumacher S, Asbach C, Schmid H-J. Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections. Gefahrstoffe. Published online 2021:16-28. doi:10.37544/0949-8036-2021-01-02-18
LibreCat | DOI
 
[88]
2021 | Conference Paper | LibreCat-ID: 24160
Kletetzka I, Kummert C, Schmid H-J. Laser Sintering Design Guidelines for media transmitting Components. In: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium. Vol 32. Laboratory for Freeform Fabrication and University of Texas.
LibreCat | Download (ext.)
 
[87]
2020 | Journal Article | LibreCat-ID: 21948
Pawelczyk S, Kniepkamp M, Jesinghausen S, Schmid H-J. Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures. Materials. Published online 2020. doi:10.3390/ma13020467
LibreCat | DOI
 
[86]
2020 | Journal Article | LibreCat-ID: 21949
Haist M, Link J, Nicia D, et al. Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries. Materials and Structures. 2020. doi:10.1617/s11527-020-01477-w
LibreCat | DOI
 
[85]
2020 | Conference Paper | LibreCat-ID: 22182
Kummert C, Diekmann W, Tews K, Schmid H-J. Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens. In: 29th Annual International Solid Freeform Fabrication Symposium. Vol 29. ; 2020:735-744. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf
LibreCat | DOI
 
[84]
2020 | Journal Article | LibreCat-ID: 24241
Rasche DB, Tigges L, Schmid H-J. An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output. Review of Scientific Instruments. 2020;91:055104. doi:10.1063/1.5133438
LibreCat | DOI
 
[83]
2019 | Report | LibreCat-ID: 24628
Menge D, Walter R, Schmid H-J, Breuer UP. FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen. Vol 1338.; 2019.
LibreCat
 
[82]
2019 | Book Chapter | LibreCat-ID: 26098
Schmid H-J, Grundmeier G, Dörmann M, Orive AG, de los Arcos T, Torun B. Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges. In: Particles in Contact. ; 2019. doi:10.1007/978-3-030-15899-6_2
LibreCat | DOI
 
[81]
2019 | Conference Paper | LibreCat-ID: 22198
Klippstein SH, Schmid H-J. Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung. In: Proceedings of the 16th Rapid.Tech Conference. ; 2019. doi:10.3139/9783446462441.025
LibreCat | DOI
 
[80]
2019 | Conference Paper | LibreCat-ID: 22202
Klippstein SH, Duchting A, Reiher T, Hengsbach F, Menge D, Schmid H-J. Devolopment, Production and post-processing of a topology optimized aircraft bracket . In: 30th Annual International Solid Freeform Fabrication Symposium. Vol 30. ; 2019:1932-1945. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/160 Development, Production and Post-Processing of a T.pdf
LibreCat | DOI
 
[79]
2019 | Journal Article | LibreCat-ID: 22695
Giner I, Torun B, Han Y, et al. Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers. Applied Surface Science. Published online 2019:873-879. doi:10.1016/j.apsusc.2018.12.221
LibreCat | DOI
 
[78]
2018 | Journal Article | LibreCat-ID: 22196
Kummert C, Josupeit S, Schmid H-J. Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung. Journal of Minerals, Metals and Materials Society. 2018;70(3):425-430. doi:10.1007/s11837-017-2658-2
LibreCat | DOI
 
[77]
2018 | Journal Article | LibreCat-ID: 26103
Abishek S, King AJC, Schuler J, Kasper G, Schmid H-J, Mullins BJ. Representative domain size for the simulation of coalescence filtration in nonwoven and foam media. Separation and Purification Technology. Published online 2018:344-352. doi:10.1016/j.seppur.2018.06.051
LibreCat | DOI
 
[76]
2018 | Conference Paper | LibreCat-ID: 22183
Menge D, Delfs P, Töws M, Schmid H-J. Topology Optimized Heat Transfer Using the Example of an Electronic Housing. In: 29th Annual International Solid Freeform Fabrication Symposium. Vol 29. ; 2018:687-697.
LibreCat | Download (ext.)
 
[75]
2017 | Journal Article | LibreCat-ID: 26106
Laube J, Dörmann M, Schmid H-J, Mädler L, Colombi Ciacchi L. Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity. The Journal of Physical Chemistry C. Published online 2017:15294-15303. doi:10.1021/acs.jpcc.7b05655
LibreCat | DOI
 
[74]
2017 | Book Chapter | LibreCat-ID: 23759
Menge D, Josupeit S, Delfs P, Schmid H-J. Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen. In: Richard HA, Schramm B, Zipsner T, eds. Additive Fertigung von Bauteilen und Strukturen. Wiesbaden: Springer Vieweg; 2017:105-120. doi:10.1007/978-3-658-17780-5
LibreCat | DOI
 
[73]
2017 | Journal Article | LibreCat-ID: 26107
Dörmann M, Schmid H-J. Distance-dependency of capillary bridges in thermodynamic equilibrium. Powder Technology. Published online 2017:175-183. doi:10.1016/j.powtec.2017.01.012
LibreCat | DOI
 
[72]
2017 | Journal Article | LibreCat-ID: 22195
Josupeit S, Schmid H-J. Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories. Journal of Applied Polymer Science. 2017;134(42). doi:10.1002/app.45435
LibreCat | DOI
 
[71]
2017 | Book Chapter | LibreCat-ID: 26104
Lohn J, Schmid H-J. Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613. In: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing. ; 2017. doi:10.3139/9783446454606.023
LibreCat | DOI
 
[70]
2016 | Journal Article | LibreCat-ID: 21947
Jesinghausen S, Weiffen R, Schmid H-J. Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows. Experiments in Fluids. 2016. doi:10.1007/s00348-016-2241-6
LibreCat | DOI
 
[69]
2016 | Journal Article | LibreCat-ID: 22185
Delfs P, Tows M, Schmid H-J. Optimized build orientation of additive manufactured parts for improved surface quality and build time. Additive Manufacturing. 2016;2(12, Part B):214-320. doi:10.1016/j.addma.2016.06.003
LibreCat | DOI
 
[68]
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit S, Delfs P, Lieneke T, et al. Dimensional accuracy of polymer laser sintered parts: Influences and measures. In: Rapid Tech - International Trade Show & Conference for Additive Manufacturing . ; 2016:107-120. doi:10.3139/9783446450608.009
LibreCat | DOI
 
[67]
2016 | Conference Paper | LibreCat-ID: 22180
Josupeit S, Delfs P, Menge D, Schmid H-J. Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures. In: 27th Annual International Solid Freeform Fabrication Symposium . Vol 27. ; 2016:2077-2086. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf
LibreCat | DOI
 
[66]
2016 | Book (Editor) | LibreCat-ID: 26113
Kniffka W, Eichmann M, Witt G, et al., eds. Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.; 2016. doi:10.3139/9783446450608.009
LibreCat | DOI
 
[65]
2016 | Journal Article | LibreCat-ID: 26118
Pieper S, Schmid H-J. Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear. Journal of Non-Newtonian Fluid Mechanics. Published online 2016:1-7. doi:10.1016/j.jnnfm.2016.04.004
LibreCat | DOI
 
[64]
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit S, Delfs P, Lieneke T, Schmid H-J. Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain. In: 27th Annual International Solid Freeform Fabrication Symposium . ; 2016.
LibreCat
 
[63]
2016 | Conference Paper | LibreCat-ID: 22194
Josupeit S, Schmid H-J. Thermal properties of polyamide 12 powder for application in laser sintering. In: International Congress on Particle Technology (PARTEC) . ; 2016.
LibreCat
 
[62]
2016 | Conference Paper | LibreCat-ID: 22404
Lammers S, Adam G, Schmid H-J, et al. Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine. In: EDPC 2016. ; 2016. doi:10.1109/EDPC.2016.7851312
LibreCat | DOI
 
[61]
2016 | Conference Paper | LibreCat-ID: 22190
Delfs P, Schmid H-J. Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts . In: Fraunhofer Direct Digital Manufacturing Conference. Vol 3. ; 2016:411-414. doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#
LibreCat | DOI
 
[60]
2016 | Journal Article | LibreCat-ID: 26109
Josupeit S, Ordia L, Schmid H-J. Modelling of temperatures and heat flow within laser sintered part cakes. Additive Manufacturing. Published online 2016:189-196. doi:10.1016/j.addma.2016.06.002
LibreCat | DOI
 
[59]
2016 | Journal Article | LibreCat-ID: 26111
Schmid H-J, Pieper S. Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer. Applied Rheology. Published online 2016. doi:10.3933/APPLRHEOL-26-64533
LibreCat | DOI
 
[58]
2015 | Conference Paper | LibreCat-ID: 22189
Delfs P, Toews M, Schmid H-J. Surface roughness optimized alignment of parts for additive manufacturing processes. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:1334-1344. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf
LibreCat | DOI
 
[57]
2015 | Conference Paper | LibreCat-ID: 23074
Koke I, Dibblee K, Hankeln F, Seidel S, Trächtler A, Schmid H-J. Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen. In: 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn. ; 2015.
LibreCat
 
[56]
2015 | Journal Article | LibreCat-ID: 26124
Dörmann M, Schmid H-J. Simulation of Capillary Bridges between Particles. Procedia Engineering. Published online 2015:14-23. doi:10.1016/j.proeng.2015.01.102
LibreCat | DOI
 
[55]
2015 | Conference Paper | LibreCat-ID: 22178
Delfs P, Li Z, Schmid H-J. Mass finishing of laser sintered parts. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:514-526. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf
LibreCat | DOI
 
[54]
2015 | Conference Paper | LibreCat-ID: 22179
Josupeit S, Schmid H-J. Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:190-199. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf
LibreCat | DOI
 
[53]
2015 | Book Chapter | LibreCat-ID: 26119
Erler JV, Machunsky S, Franke S, Grimm P, Schmid H-J, Peuker UA. Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols. In: Colloid Process Engineering. ; 2015. doi:10.1007/978-3-319-15129-8_16
LibreCat | DOI
 
[52]
2015 | Journal Article | LibreCat-ID: 26121
Tigges L, Wiedensohler A, Weinhold K, Gandhi J, Schmid H-J. Bipolar charge distribution of a soft X-ray diffusion charger. Journal of Aerosol Science. Published online 2015:77-86. doi:10.1016/j.jaerosci.2015.07.002
LibreCat | DOI
 
[51]
2015 | Conference Paper | LibreCat-ID: 22187
Josupeit S, Lohn J, Hermann E, Gessler M, Tenbrink S, Schmid H-J. Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:540-549. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf
LibreCat | DOI
 
[50]
2015 | Conference Paper | LibreCat-ID: 22199
Josupeit S, Tutzschky S, Gessler M, Schmid H-J. Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates. In: Proceedings of the Rapid Tech 2015. Springer Vieweg; 2015:63-78. doi:10.1007/978-3-662-48473-9_5
LibreCat | DOI
 
[49]
2015 | Journal Article | LibreCat-ID: 26108
Schiller S, Hellmich C, Schmid H-J. Evaluation of the Efficiency of Filtration Processes Using Precoat Materials. Chemical Engineering & Technology. Published online 2015:491-498. doi:10.1002/ceat.201500385
LibreCat | DOI
 
[48]
2015 | Journal Article | LibreCat-ID: 26122
Tigges L, Jain A, Schmid H-J. On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations. Journal of Aerosol Science. Published online 2015:119-134. doi:10.1016/j.jaerosci.2015.05.010
LibreCat | DOI
 
[47]
2015 | Journal Article | LibreCat-ID: 26123
Schiller S, Schmid H-J. Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials. Powder Technology. Published online 2015:96-105. doi:10.1016/j.powtec.2015.03.048
LibreCat | DOI
 
[46]
2014 | Conference Paper | LibreCat-ID: 22177
Josupeit S, Schmid H-J. Three-dimensional in-process temperature measurement of laser sintered part cakes. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:49-58. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf
LibreCat | DOI
 
[45]
2014 | Conference Paper | LibreCat-ID: 22184
Josupeit S, Rüsenberg S, Rupp N, Gessler M, Schmid H-J. Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics. In: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014). Vol 72. ; 2014:2383-2385. doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics
LibreCat | DOI
 
[44]
2014 | Journal Article | LibreCat-ID: 26125
Pieper S, Kirchhoff N, Schmid H-J. Absence of pressure sensitivity of apparent wall slip in pressure-driven flow of non-colloidal suspensions. Rheologica Acta. Published online 2014:69-75. doi:10.1007/s00397-014-0815-x
LibreCat | DOI
 
[43]
2014 | Conference Paper | LibreCat-ID: 22193
Josupeit S, Ordia L, Schmid H-J. Development of a Basic Model to Simulate the Laser Sintering Cooling Process. In: International Conference on Additive Technologies. Vol 5. ; 2014:222-227. doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf
LibreCat | DOI
 
[42]
2014 | Journal Article | LibreCat-ID: 22186
Rüsenberg S, Josupeit S, Schmid H-J. A method to characterize the quality of a polymer laser sintering process . Advances in Mechanical Engineering. 2014;6:1687-8140. doi:10.1155/2014/185374
LibreCat | DOI
 
[41]
2014 | Journal Article | LibreCat-ID: 26126
Schiller S, Schmid H-J. Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media. Chemical Engineering & Technology. Published online 2014:1009-1020. doi:10.1002/ceat.201300856
LibreCat | DOI
 
[40]
2014 | Journal Article | LibreCat-ID: 26127
Dörmann M, Schmid H-J. Simulation of Capillary Bridges between Nanoscale Particles. Langmuir. Published online 2014:1055-1062. doi:10.1021/la404409k
LibreCat | DOI
 
[39]
2014 | Conference Paper | LibreCat-ID: 22203
Delfs P, Schmid H-J. Simulation of the Surface Topography on Laser Sintered Polymer Parts. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
LibreCat | DOI
 
[38]
2014 | Conference Paper | LibreCat-ID: 22176
Delfs P, Herale AA, Li Z, Schmid H-J. Simulation of the Surface Topography on Laser Sintered Polymer Parts. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
LibreCat | DOI
 
[37]
2013 | Journal Article | LibreCat-ID: 26129
Erler J, Machunsky S, Grimm P, Schmid H-J, Peuker UA. Liquid–liquid phase transfer of magnetite nanoparticles — Evaluation of surfactants. Powder Technology. 2013;247:265-269. doi:10.1016/j.powtec.2012.09.047
LibreCat | DOI
 
[36]
2013 | Conference Paper | LibreCat-ID: 22192
Rüsenberg S, Schmid H-J. Advanced characterization method of Nylon 12 materials for application in laser sinter processing. In: International Conference of the Polymer-Processing-Society (PPS). Vol 29. ; 2013. doi:10.1063/1.4873877
LibreCat | DOI
 
[35]
2013 | Conference Paper | LibreCat-ID: 22197
Josupeit S, Rüsenberg S, Schmid H-J. Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien. In: Merseburger Rapid Prototyping Forum. Vol 7. ; 2013. doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf
LibreCat | DOI
 
[34]
2013 | Conference Paper | LibreCat-ID: 22201
Rüsenberg S, Bagsik A, Büsching J, Schmid H-J. Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie. In: RapidTech. ; 2013.
LibreCat
 
[33]
2013 | Conference Paper | LibreCat-ID: 22175
Josupeit S, Rüsenberg S, Schmid H-J. A material-based quality concept for polymer laser sintering. In: 24th Annual International Solid Freeform Fabrication Symposium . Vol 24. ; 2013:44-54. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf
LibreCat | DOI
 
[32]
2013 | Journal Article | LibreCat-ID: 26130
Schiller S, Schmid H-J. Hocheffiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen mit einem Schlauchfilter. Chemie Ingenieur Technik. Published online 2013:1324-1328. doi:10.1002/cite.201200114
LibreCat | DOI
 
[31]
2012 | Conference Paper | LibreCat-ID: 22204
Rüsenberg S, Schmid H-J. Mechanical Properties as a Result of multitude of Parameters. In: The European Forum on Additive Manufacturing. Vol 17. ; 2012. doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf
LibreCat | DOI
 
[30]
2012 | Journal Article | LibreCat-ID: 26132
Kirchhoff N, Schröder C, Stute D, Moritzer E, Schmid H-J. Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess. Chemie Ingenieur Technik. Published online 2012:1584-1589. doi:10.1002/cite.201100223
LibreCat | DOI
 
[29]
2012 | Conference Paper | LibreCat-ID: 22174
Rüsenberg S, Weiffen R, Knoop F, Schmid H-J. Controlling the Quality of Laser Sintered Parts Along the Process Chain. In: 23rd Annual International Solid Freeform Fabrication Symposium. Vol 23. ; 2012:1024-1044. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf
LibreCat | DOI
 
[28]
2012 | Journal Article | LibreCat-ID: 26133
Kirchhof MJ, Förster H, Schmid H-J, Peukert W. Sintering kinetics and mechanism of vitreous nanoparticles. Journal of Aerosol Science. 2012;45:26-39. doi:10.1016/j.jaerosci.2011.10.006
LibreCat | DOI
 
[27]
2011 | Book | LibreCat-ID: 22191
Rüsenberg S, Schmidt L, Hosse H, Schmid H-J. Porosity as a Key to Increase Material Properties of Laser Sintered Parts.; 2011:531-538. doi:10.1201/b11341
LibreCat | DOI
 
[26]
2011 | Conference Paper | LibreCat-ID: 22188
Rüsenberg S, Schmidt L, Schmid H-J. Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts. In: 22th Annual International Solid Freeform Fabrication Symposium. Vol 22. ; 2011:239-251. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf
LibreCat | DOI
 
[25]
2010 | Journal Article | LibreCat-ID: 26136
Seipenbusch M, Rothenbacher S, Kirchhoff M, Schmid H-J, Kasper G, Weber AP. Interparticle forces in silica nanoparticle agglomerates. Journal of Nanoparticle Research. 2010;12(6):2037-2044. doi:10.1007/s11051-009-9760-5
LibreCat | DOI
 
[24]
2010 | Journal Article | LibreCat-ID: 26134
Körmer R, Schmid H-J, Peukert W. Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 2: Theoretical analysis of the formation mechanism. Journal of Aerosol Science. 2010;41(11):1008-1019. doi:10.1016/j.jaerosci.2010.08.002
LibreCat | DOI
 
[23]
2010 | Journal Article | LibreCat-ID: 26135
Körmer R, Jank MPM, Ryssel H, Schmid H-J, Peukert W. Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 1: Experimental investigations. Journal of Aerosol Science. 2010;41(11):998-1007. doi:10.1016/j.jaerosci.2010.05.007
LibreCat | DOI
 
[22]
2009 | Journal Article | LibreCat-ID: 26137
Vassilev V, Gröschel M, Schmid H-J, Peukert W, Leugering G. Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories. Chemical Engineering Science. 2009;65(6):2183-2189. doi:10.1016/j.ces.2009.12.014
LibreCat | DOI
 
[21]
2009 | Journal Article | LibreCat-ID: 26138
Al Zaitone B, Schmid H-J, Peukert W. Simulation of structure and mobility of aggregates formed by simultaneous coagulation, sintering and surface growth. Journal of Aerosol Science. 2009;40(11):950-964. doi:10.1016/j.jaerosci.2009.08.007
LibreCat | DOI
 
[20]
2009 | Journal Article | LibreCat-ID: 26140
Kirchhof MJ, Schmid H-J, Peukert W. Three-dimensional simulation of viscous-flow agglomerate sintering. Physical Review E. 2009;80(2):026319. doi:10.1103/physreve.80.026319
LibreCat | DOI
 
[19]
2009 | Journal Article | LibreCat-ID: 26139
Machunsky S, Grimm P, Schmid H-J, Peuker UA. Liquid–liquid phase transfer of magnetite nanoparticles. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2009;348(1-3):186-190. doi:10.1016/j.colsurfa.2009.07.014
LibreCat | DOI
 
[18]
2008 | Journal Article | LibreCat-ID: 26142
Horn M, Schmid H-J. A comprehensive approach in modeling Lagrangian particle deposition in turbulent boundary layers. Powder Technology. 2008;186(3):189-198. doi:10.1016/j.powtec.2007.11.048
LibreCat | DOI
 
[17]
2007 | Journal Article | LibreCat-ID: 26147
Schneider L, Schmid H-J, Peukert W. Influence of particle size and concentration on the second-harmonic signal generated at colloidal surfaces. Applied Physics B. 2007;87:333-339. doi:10.1007/s00340-007-2597-7
LibreCat | DOI
 
[16]
2006 | Journal Article | LibreCat-ID: 26148
Horn M, Schmid H-J. Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen. Chemie Ingenieur Technik. 2006;78(6):694-699. doi:10.1002/cite.200500110
LibreCat | DOI
 
[15]
2006 | Journal Article | LibreCat-ID: 26150
Artelt C, Schmid H-J, Peukert W. Modelling titania formation at typical industrial process conditions: effect of surface shielding and surface energy on relevant growth mechanisms. Chemical Engineering Science. 2006;61(1):18-32. doi:10.1016/j.ces.2004.12.053
LibreCat | DOI
 
[14]
2006 | Journal Article | LibreCat-ID: 26145
Binder C, Feichtinger C, Schmid H-J, Thürey N, Peukert W, Rüde U. Simulation of the hydrodynamic drag of aggregated particles. Journal of Colloid and Interface Science. 2006;301(1):155-167. doi:10.1016/j.jcis.2006.04.045
LibreCat | DOI
 
[13]
2005 | Journal Article | LibreCat-ID: 26149
Schwarzer H-C, Schwertfirm F, Manhart M, Schmid H-J, Peukert W. Predictive simulation of nanoparticle precipitation based on the population balance equation. Chemical Engineering Science. 2005;61(1):167-181. doi:10.1016/j.ces.2004.11.064
LibreCat | DOI
 
[12]
2005 | Journal Article | LibreCat-ID: 26151
Schmid H-J, Al-Zaitone B, Artelt C, Peukert W. Evolution of the fractal dimension for simultaneous coagulation and sintering. Chemical Engineering Science. 2005;61(1):293-305. doi:10.1016/j.ces.2004.11.068
LibreCat | DOI
 
[11]
2005 | Journal Article | LibreCat-ID: 26153
Artelt C, Schmid H-J, Peukert W. On the impact of accessible surface and surface energy on particle formation and growth from the vapour phase. Journal of Aerosol Science. 2005;36(2):147-172. doi:10.1016/j.jaerosci.2004.08.003
LibreCat | DOI
 
[10]
2004 | Journal Article | LibreCat-ID: 26155
Messerer A, Schmid H-J, Knab C, Pöschl U, Nießner R. Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen. Chemie Ingenieur Technik. 2004;76(8):1092-1096. doi:10.1002/cite.200403418
LibreCat | DOI
 
[9]
2004 | Journal Article | LibreCat-ID: 26152
Schmid H-J, Tejwani S, Artelt C, Peukert W. Monte Carlo simulation of aggregate morphology for simultaneous coagulation and sintering. Journal of Nanoparticle Research. 2004;6(6):613-626. doi:10.1007/s11051-004-2161-x
LibreCat | DOI
 
[8]
2004 | Journal Article | LibreCat-ID: 26154
Kirchhof MJ, Schmid H-J, Peukert W. Reactor system for the study of high-temperature short-time sintering of nanoparticles. Review of Scientific Instruments. 2004;75(11):4833-4840. doi:10.1063/1.1809258
LibreCat | DOI
 
[7]
2003 | Journal Article | LibreCat-ID: 26156
Schmid H-J, Vogel L. On the modelling of the particle dynamics in electro-hydrodynamic flow-fields: I. Comparison of Eulerian and Lagrangian modelling approach. Powder Technology. 2003;135/136:118-135. doi:10.1016/j.powtec.2003.08.009
LibreCat | DOI
 
[6]
2003 | Journal Article | LibreCat-ID: 26157
Schmid H-J. On the modelling of the particle dynamics in electro-hydrodynamic flow fields: II. Influences of inhomogeneities on electrostatic precipitation. Powder Technology. 2003;135/136:136-149. doi:10.1016/j.powtec.2003.08.010
LibreCat | DOI
 
[5]
2003 | Journal Article | LibreCat-ID: 26158
Peukert W, Schmid H-J. Herausforderungen für die Lehre am Beispiel der mechanischen Verfahrenstechnik. Chemie Ingenieur Technik. 2003;75(3):177-183. doi:10.1002/cite.200390035
LibreCat | DOI
 
[4]
2003 | Journal Article | LibreCat-ID: 26159
Artelt C, Schmid H-J, Peukert W. On the relevance of accounting for the evolution of the fractal dimension in aerosol process simulations. Journal of Aerosol Science. 2003;34(5):511-534. doi:10.1016/s0021-8502(03)00005-3
LibreCat | DOI
 
[3]
2002 | Book Chapter | LibreCat-ID: 26169
Schmid H-J. Trennprozesse: Abschnitt 7.5.3. In: Handbuch Der Mechanischen Verfahrenstechnik. ; 2002. doi:10.1002/3527603352.ch7r
LibreCat | DOI
 
[2]
2002 | Journal Article | LibreCat-ID: 26160
Schiel A, Weber AP, Kasper G, Schmid H-J. In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures. Particle & Particle Systems Characterization. 2002;19(6):410-418. doi:10.1002/ppsc.200290004
LibreCat | DOI
 
[1]
2002 | Journal Article | LibreCat-ID: 26161
Schmid H-J, Veith S, Umhauer H. In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow. Particle & Particle Systems Characterization. 2002;19(3). doi:10.1002/1521-4117(200207)19:3<203::aid-ppsc203>3.0.co;2-7
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed

91 Publications

Mark all

[91]
2021 | Misc | LibreCat-ID: 24202
Pawelczyk S, Jesinghausen S, Schmid H-J. Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention.; 2021.
LibreCat | Files available
 
[90]
2021 | Journal Article | LibreCat-ID: 25142
Kummert C, Schmid H-J, Risse L, Kullmer G. Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures. Journal of Materials Research. Published online 2021. doi:10.1557/s43578-021-00321-3
LibreCat | DOI
 
[89]
2021 | Journal Article | LibreCat-ID: 26095
Schumacher S, Asbach C, Schmid H-J. Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections. Gefahrstoffe. Published online 2021:16-28. doi:10.37544/0949-8036-2021-01-02-18
LibreCat | DOI
 
[88]
2021 | Conference Paper | LibreCat-ID: 24160
Kletetzka I, Kummert C, Schmid H-J. Laser Sintering Design Guidelines for media transmitting Components. In: Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium. Vol 32. Laboratory for Freeform Fabrication and University of Texas.
LibreCat | Download (ext.)
 
[87]
2020 | Journal Article | LibreCat-ID: 21948
Pawelczyk S, Kniepkamp M, Jesinghausen S, Schmid H-J. Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures. Materials. Published online 2020. doi:10.3390/ma13020467
LibreCat | DOI
 
[86]
2020 | Journal Article | LibreCat-ID: 21949
Haist M, Link J, Nicia D, et al. Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries. Materials and Structures. 2020. doi:10.1617/s11527-020-01477-w
LibreCat | DOI
 
[85]
2020 | Conference Paper | LibreCat-ID: 22182
Kummert C, Diekmann W, Tews K, Schmid H-J. Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens. In: 29th Annual International Solid Freeform Fabrication Symposium. Vol 29. ; 2020:735-744. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf
LibreCat | DOI
 
[84]
2020 | Journal Article | LibreCat-ID: 24241
Rasche DB, Tigges L, Schmid H-J. An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output. Review of Scientific Instruments. 2020;91:055104. doi:10.1063/1.5133438
LibreCat | DOI
 
[83]
2019 | Report | LibreCat-ID: 24628
Menge D, Walter R, Schmid H-J, Breuer UP. FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen. Vol 1338.; 2019.
LibreCat
 
[82]
2019 | Book Chapter | LibreCat-ID: 26098
Schmid H-J, Grundmeier G, Dörmann M, Orive AG, de los Arcos T, Torun B. Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges. In: Particles in Contact. ; 2019. doi:10.1007/978-3-030-15899-6_2
LibreCat | DOI
 
[81]
2019 | Conference Paper | LibreCat-ID: 22198
Klippstein SH, Schmid H-J. Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung. In: Proceedings of the 16th Rapid.Tech Conference. ; 2019. doi:10.3139/9783446462441.025
LibreCat | DOI
 
[80]
2019 | Conference Paper | LibreCat-ID: 22202
Klippstein SH, Duchting A, Reiher T, Hengsbach F, Menge D, Schmid H-J. Devolopment, Production and post-processing of a topology optimized aircraft bracket . In: 30th Annual International Solid Freeform Fabrication Symposium. Vol 30. ; 2019:1932-1945. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/160 Development, Production and Post-Processing of a T.pdf
LibreCat | DOI
 
[79]
2019 | Journal Article | LibreCat-ID: 22695
Giner I, Torun B, Han Y, et al. Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers. Applied Surface Science. Published online 2019:873-879. doi:10.1016/j.apsusc.2018.12.221
LibreCat | DOI
 
[78]
2018 | Journal Article | LibreCat-ID: 22196
Kummert C, Josupeit S, Schmid H-J. Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung. Journal of Minerals, Metals and Materials Society. 2018;70(3):425-430. doi:10.1007/s11837-017-2658-2
LibreCat | DOI
 
[77]
2018 | Journal Article | LibreCat-ID: 26103
Abishek S, King AJC, Schuler J, Kasper G, Schmid H-J, Mullins BJ. Representative domain size for the simulation of coalescence filtration in nonwoven and foam media. Separation and Purification Technology. Published online 2018:344-352. doi:10.1016/j.seppur.2018.06.051
LibreCat | DOI
 
[76]
2018 | Conference Paper | LibreCat-ID: 22183
Menge D, Delfs P, Töws M, Schmid H-J. Topology Optimized Heat Transfer Using the Example of an Electronic Housing. In: 29th Annual International Solid Freeform Fabrication Symposium. Vol 29. ; 2018:687-697.
LibreCat | Download (ext.)
 
[75]
2017 | Journal Article | LibreCat-ID: 26106
Laube J, Dörmann M, Schmid H-J, Mädler L, Colombi Ciacchi L. Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity. The Journal of Physical Chemistry C. Published online 2017:15294-15303. doi:10.1021/acs.jpcc.7b05655
LibreCat | DOI
 
[74]
2017 | Book Chapter | LibreCat-ID: 23759
Menge D, Josupeit S, Delfs P, Schmid H-J. Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen. In: Richard HA, Schramm B, Zipsner T, eds. Additive Fertigung von Bauteilen und Strukturen. Wiesbaden: Springer Vieweg; 2017:105-120. doi:10.1007/978-3-658-17780-5
LibreCat | DOI
 
[73]
2017 | Journal Article | LibreCat-ID: 26107
Dörmann M, Schmid H-J. Distance-dependency of capillary bridges in thermodynamic equilibrium. Powder Technology. Published online 2017:175-183. doi:10.1016/j.powtec.2017.01.012
LibreCat | DOI
 
[72]
2017 | Journal Article | LibreCat-ID: 22195
Josupeit S, Schmid H-J. Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories. Journal of Applied Polymer Science. 2017;134(42). doi:10.1002/app.45435
LibreCat | DOI
 
[71]
2017 | Book Chapter | LibreCat-ID: 26104
Lohn J, Schmid H-J. Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613. In: Rapid.Tech – International Trade Show & Conference for Additive Manufacturing. ; 2017. doi:10.3139/9783446454606.023
LibreCat | DOI
 
[70]
2016 | Journal Article | LibreCat-ID: 21947
Jesinghausen S, Weiffen R, Schmid H-J. Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows. Experiments in Fluids. 2016. doi:10.1007/s00348-016-2241-6
LibreCat | DOI
 
[69]
2016 | Journal Article | LibreCat-ID: 22185
Delfs P, Tows M, Schmid H-J. Optimized build orientation of additive manufactured parts for improved surface quality and build time. Additive Manufacturing. 2016;2(12, Part B):214-320. doi:10.1016/j.addma.2016.06.003
LibreCat | DOI
 
[68]
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit S, Delfs P, Lieneke T, et al. Dimensional accuracy of polymer laser sintered parts: Influences and measures. In: Rapid Tech - International Trade Show & Conference for Additive Manufacturing . ; 2016:107-120. doi:10.3139/9783446450608.009
LibreCat | DOI
 
[67]
2016 | Conference Paper | LibreCat-ID: 22180
Josupeit S, Delfs P, Menge D, Schmid H-J. Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures. In: 27th Annual International Solid Freeform Fabrication Symposium . Vol 27. ; 2016:2077-2086. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf
LibreCat | DOI
 
[66]
2016 | Book (Editor) | LibreCat-ID: 26113
Kniffka W, Eichmann M, Witt G, et al., eds. Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.; 2016. doi:10.3139/9783446450608.009
LibreCat | DOI
 
[65]
2016 | Journal Article | LibreCat-ID: 26118
Pieper S, Schmid H-J. Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear. Journal of Non-Newtonian Fluid Mechanics. Published online 2016:1-7. doi:10.1016/j.jnnfm.2016.04.004
LibreCat | DOI
 
[64]
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit S, Delfs P, Lieneke T, Schmid H-J. Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain. In: 27th Annual International Solid Freeform Fabrication Symposium . ; 2016.
LibreCat
 
[63]
2016 | Conference Paper | LibreCat-ID: 22194
Josupeit S, Schmid H-J. Thermal properties of polyamide 12 powder for application in laser sintering. In: International Congress on Particle Technology (PARTEC) . ; 2016.
LibreCat
 
[62]
2016 | Conference Paper | LibreCat-ID: 22404
Lammers S, Adam G, Schmid H-J, et al. Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine. In: EDPC 2016. ; 2016. doi:10.1109/EDPC.2016.7851312
LibreCat | DOI
 
[61]
2016 | Conference Paper | LibreCat-ID: 22190
Delfs P, Schmid H-J. Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts . In: Fraunhofer Direct Digital Manufacturing Conference. Vol 3. ; 2016:411-414. doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#
LibreCat | DOI
 
[60]
2016 | Journal Article | LibreCat-ID: 26109
Josupeit S, Ordia L, Schmid H-J. Modelling of temperatures and heat flow within laser sintered part cakes. Additive Manufacturing. Published online 2016:189-196. doi:10.1016/j.addma.2016.06.002
LibreCat | DOI
 
[59]
2016 | Journal Article | LibreCat-ID: 26111
Schmid H-J, Pieper S. Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer. Applied Rheology. Published online 2016. doi:10.3933/APPLRHEOL-26-64533
LibreCat | DOI
 
[58]
2015 | Conference Paper | LibreCat-ID: 22189
Delfs P, Toews M, Schmid H-J. Surface roughness optimized alignment of parts for additive manufacturing processes. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:1334-1344. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf
LibreCat | DOI
 
[57]
2015 | Conference Paper | LibreCat-ID: 23074
Koke I, Dibblee K, Hankeln F, Seidel S, Trächtler A, Schmid H-J. Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen. In: 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn. ; 2015.
LibreCat
 
[56]
2015 | Journal Article | LibreCat-ID: 26124
Dörmann M, Schmid H-J. Simulation of Capillary Bridges between Particles. Procedia Engineering. Published online 2015:14-23. doi:10.1016/j.proeng.2015.01.102
LibreCat | DOI
 
[55]
2015 | Conference Paper | LibreCat-ID: 22178
Delfs P, Li Z, Schmid H-J. Mass finishing of laser sintered parts. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:514-526. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf
LibreCat | DOI
 
[54]
2015 | Conference Paper | LibreCat-ID: 22179
Josupeit S, Schmid H-J. Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:190-199. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf
LibreCat | DOI
 
[53]
2015 | Book Chapter | LibreCat-ID: 26119
Erler JV, Machunsky S, Franke S, Grimm P, Schmid H-J, Peuker UA. Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols. In: Colloid Process Engineering. ; 2015. doi:10.1007/978-3-319-15129-8_16
LibreCat | DOI
 
[52]
2015 | Journal Article | LibreCat-ID: 26121
Tigges L, Wiedensohler A, Weinhold K, Gandhi J, Schmid H-J. Bipolar charge distribution of a soft X-ray diffusion charger. Journal of Aerosol Science. Published online 2015:77-86. doi:10.1016/j.jaerosci.2015.07.002
LibreCat | DOI
 
[51]
2015 | Conference Paper | LibreCat-ID: 22187
Josupeit S, Lohn J, Hermann E, Gessler M, Tenbrink S, Schmid H-J. Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:540-549. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf
LibreCat | DOI
 
[50]
2015 | Conference Paper | LibreCat-ID: 22199
Josupeit S, Tutzschky S, Gessler M, Schmid H-J. Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates. In: Proceedings of the Rapid Tech 2015. Springer Vieweg; 2015:63-78. doi:10.1007/978-3-662-48473-9_5
LibreCat | DOI
 
[49]
2015 | Journal Article | LibreCat-ID: 26108
Schiller S, Hellmich C, Schmid H-J. Evaluation of the Efficiency of Filtration Processes Using Precoat Materials. Chemical Engineering & Technology. Published online 2015:491-498. doi:10.1002/ceat.201500385
LibreCat | DOI
 
[48]
2015 | Journal Article | LibreCat-ID: 26122
Tigges L, Jain A, Schmid H-J. On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations. Journal of Aerosol Science. Published online 2015:119-134. doi:10.1016/j.jaerosci.2015.05.010
LibreCat | DOI
 
[47]
2015 | Journal Article | LibreCat-ID: 26123
Schiller S, Schmid H-J. Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials. Powder Technology. Published online 2015:96-105. doi:10.1016/j.powtec.2015.03.048
LibreCat | DOI
 
[46]
2014 | Conference Paper | LibreCat-ID: 22177
Josupeit S, Schmid H-J. Three-dimensional in-process temperature measurement of laser sintered part cakes. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:49-58. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf
LibreCat | DOI
 
[45]
2014 | Conference Paper | LibreCat-ID: 22184
Josupeit S, Rüsenberg S, Rupp N, Gessler M, Schmid H-J. Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics. In: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014). Vol 72. ; 2014:2383-2385. doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics
LibreCat | DOI
 
[44]
2014 | Journal Article | LibreCat-ID: 26125
Pieper S, Kirchhoff N, Schmid H-J. Absence of pressure sensitivity of apparent wall slip in pressure-driven flow of non-colloidal suspensions. Rheologica Acta. Published online 2014:69-75. doi:10.1007/s00397-014-0815-x
LibreCat | DOI
 
[43]
2014 | Conference Paper | LibreCat-ID: 22193
Josupeit S, Ordia L, Schmid H-J. Development of a Basic Model to Simulate the Laser Sintering Cooling Process. In: International Conference on Additive Technologies. Vol 5. ; 2014:222-227. doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf
LibreCat | DOI
 
[42]
2014 | Journal Article | LibreCat-ID: 22186
Rüsenberg S, Josupeit S, Schmid H-J. A method to characterize the quality of a polymer laser sintering process . Advances in Mechanical Engineering. 2014;6:1687-8140. doi:10.1155/2014/185374
LibreCat | DOI
 
[41]
2014 | Journal Article | LibreCat-ID: 26126
Schiller S, Schmid H-J. Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media. Chemical Engineering & Technology. Published online 2014:1009-1020. doi:10.1002/ceat.201300856
LibreCat | DOI
 
[40]
2014 | Journal Article | LibreCat-ID: 26127
Dörmann M, Schmid H-J. Simulation of Capillary Bridges between Nanoscale Particles. Langmuir. Published online 2014:1055-1062. doi:10.1021/la404409k
LibreCat | DOI
 
[39]
2014 | Conference Paper | LibreCat-ID: 22203
Delfs P, Schmid H-J. Simulation of the Surface Topography on Laser Sintered Polymer Parts. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
LibreCat | DOI
 
[38]
2014 | Conference Paper | LibreCat-ID: 22176
Delfs P, Herale AA, Li Z, Schmid H-J. Simulation of the Surface Topography on Laser Sintered Polymer Parts. In: 25th Annual International Solid Freeform Fabrication Symposium. Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
LibreCat | DOI
 
[37]
2013 | Journal Article | LibreCat-ID: 26129
Erler J, Machunsky S, Grimm P, Schmid H-J, Peuker UA. Liquid–liquid phase transfer of magnetite nanoparticles — Evaluation of surfactants. Powder Technology. 2013;247:265-269. doi:10.1016/j.powtec.2012.09.047
LibreCat | DOI
 
[36]
2013 | Conference Paper | LibreCat-ID: 22192
Rüsenberg S, Schmid H-J. Advanced characterization method of Nylon 12 materials for application in laser sinter processing. In: International Conference of the Polymer-Processing-Society (PPS). Vol 29. ; 2013. doi:10.1063/1.4873877
LibreCat | DOI
 
[35]
2013 | Conference Paper | LibreCat-ID: 22197
Josupeit S, Rüsenberg S, Schmid H-J. Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien. In: Merseburger Rapid Prototyping Forum. Vol 7. ; 2013. doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf
LibreCat | DOI
 
[34]
2013 | Conference Paper | LibreCat-ID: 22201
Rüsenberg S, Bagsik A, Büsching J, Schmid H-J. Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie. In: RapidTech. ; 2013.
LibreCat
 
[33]
2013 | Conference Paper | LibreCat-ID: 22175
Josupeit S, Rüsenberg S, Schmid H-J. A material-based quality concept for polymer laser sintering. In: 24th Annual International Solid Freeform Fabrication Symposium . Vol 24. ; 2013:44-54. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf
LibreCat | DOI
 
[32]
2013 | Journal Article | LibreCat-ID: 26130
Schiller S, Schmid H-J. Hocheffiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen mit einem Schlauchfilter. Chemie Ingenieur Technik. Published online 2013:1324-1328. doi:10.1002/cite.201200114
LibreCat | DOI
 
[31]
2012 | Conference Paper | LibreCat-ID: 22204
Rüsenberg S, Schmid H-J. Mechanical Properties as a Result of multitude of Parameters. In: The European Forum on Additive Manufacturing. Vol 17. ; 2012. doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf
LibreCat | DOI
 
[30]
2012 | Journal Article | LibreCat-ID: 26132
Kirchhoff N, Schröder C, Stute D, Moritzer E, Schmid H-J. Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess. Chemie Ingenieur Technik. Published online 2012:1584-1589. doi:10.1002/cite.201100223
LibreCat | DOI
 
[29]
2012 | Conference Paper | LibreCat-ID: 22174
Rüsenberg S, Weiffen R, Knoop F, Schmid H-J. Controlling the Quality of Laser Sintered Parts Along the Process Chain. In: 23rd Annual International Solid Freeform Fabrication Symposium. Vol 23. ; 2012:1024-1044. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf
LibreCat | DOI
 
[28]
2012 | Journal Article | LibreCat-ID: 26133
Kirchhof MJ, Förster H, Schmid H-J, Peukert W. Sintering kinetics and mechanism of vitreous nanoparticles. Journal of Aerosol Science. 2012;45:26-39. doi:10.1016/j.jaerosci.2011.10.006
LibreCat | DOI
 
[27]
2011 | Book | LibreCat-ID: 22191
Rüsenberg S, Schmidt L, Hosse H, Schmid H-J. Porosity as a Key to Increase Material Properties of Laser Sintered Parts.; 2011:531-538. doi:10.1201/b11341
LibreCat | DOI
 
[26]
2011 | Conference Paper | LibreCat-ID: 22188
Rüsenberg S, Schmidt L, Schmid H-J. Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts. In: 22th Annual International Solid Freeform Fabrication Symposium. Vol 22. ; 2011:239-251. doi:http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf
LibreCat | DOI
 
[25]
2010 | Journal Article | LibreCat-ID: 26136
Seipenbusch M, Rothenbacher S, Kirchhoff M, Schmid H-J, Kasper G, Weber AP. Interparticle forces in silica nanoparticle agglomerates. Journal of Nanoparticle Research. 2010;12(6):2037-2044. doi:10.1007/s11051-009-9760-5
LibreCat | DOI
 
[24]
2010 | Journal Article | LibreCat-ID: 26134
Körmer R, Schmid H-J, Peukert W. Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 2: Theoretical analysis of the formation mechanism. Journal of Aerosol Science. 2010;41(11):1008-1019. doi:10.1016/j.jaerosci.2010.08.002
LibreCat | DOI
 
[23]
2010 | Journal Article | LibreCat-ID: 26135
Körmer R, Jank MPM, Ryssel H, Schmid H-J, Peukert W. Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 1: Experimental investigations. Journal of Aerosol Science. 2010;41(11):998-1007. doi:10.1016/j.jaerosci.2010.05.007
LibreCat | DOI
 
[22]
2009 | Journal Article | LibreCat-ID: 26137
Vassilev V, Gröschel M, Schmid H-J, Peukert W, Leugering G. Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories. Chemical Engineering Science. 2009;65(6):2183-2189. doi:10.1016/j.ces.2009.12.014
LibreCat | DOI
 
[21]
2009 | Journal Article | LibreCat-ID: 26138
Al Zaitone B, Schmid H-J, Peukert W. Simulation of structure and mobility of aggregates formed by simultaneous coagulation, sintering and surface growth. Journal of Aerosol Science. 2009;40(11):950-964. doi:10.1016/j.jaerosci.2009.08.007
LibreCat | DOI
 
[20]
2009 | Journal Article | LibreCat-ID: 26140
Kirchhof MJ, Schmid H-J, Peukert W. Three-dimensional simulation of viscous-flow agglomerate sintering. Physical Review E. 2009;80(2):026319. doi:10.1103/physreve.80.026319
LibreCat | DOI
 
[19]
2009 | Journal Article | LibreCat-ID: 26139
Machunsky S, Grimm P, Schmid H-J, Peuker UA. Liquid–liquid phase transfer of magnetite nanoparticles. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2009;348(1-3):186-190. doi:10.1016/j.colsurfa.2009.07.014
LibreCat | DOI
 
[18]
2008 | Journal Article | LibreCat-ID: 26142
Horn M, Schmid H-J. A comprehensive approach in modeling Lagrangian particle deposition in turbulent boundary layers. Powder Technology. 2008;186(3):189-198. doi:10.1016/j.powtec.2007.11.048
LibreCat | DOI
 
[17]
2007 | Journal Article | LibreCat-ID: 26147
Schneider L, Schmid H-J, Peukert W. Influence of particle size and concentration on the second-harmonic signal generated at colloidal surfaces. Applied Physics B. 2007;87:333-339. doi:10.1007/s00340-007-2597-7
LibreCat | DOI
 
[16]
2006 | Journal Article | LibreCat-ID: 26148
Horn M, Schmid H-J. Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen. Chemie Ingenieur Technik. 2006;78(6):694-699. doi:10.1002/cite.200500110
LibreCat | DOI
 
[15]
2006 | Journal Article | LibreCat-ID: 26150
Artelt C, Schmid H-J, Peukert W. Modelling titania formation at typical industrial process conditions: effect of surface shielding and surface energy on relevant growth mechanisms. Chemical Engineering Science. 2006;61(1):18-32. doi:10.1016/j.ces.2004.12.053
LibreCat | DOI
 
[14]
2006 | Journal Article | LibreCat-ID: 26145
Binder C, Feichtinger C, Schmid H-J, Thürey N, Peukert W, Rüde U. Simulation of the hydrodynamic drag of aggregated particles. Journal of Colloid and Interface Science. 2006;301(1):155-167. doi:10.1016/j.jcis.2006.04.045
LibreCat | DOI
 
[13]
2005 | Journal Article | LibreCat-ID: 26149
Schwarzer H-C, Schwertfirm F, Manhart M, Schmid H-J, Peukert W. Predictive simulation of nanoparticle precipitation based on the population balance equation. Chemical Engineering Science. 2005;61(1):167-181. doi:10.1016/j.ces.2004.11.064
LibreCat | DOI
 
[12]
2005 | Journal Article | LibreCat-ID: 26151
Schmid H-J, Al-Zaitone B, Artelt C, Peukert W. Evolution of the fractal dimension for simultaneous coagulation and sintering. Chemical Engineering Science. 2005;61(1):293-305. doi:10.1016/j.ces.2004.11.068
LibreCat | DOI
 
[11]
2005 | Journal Article | LibreCat-ID: 26153
Artelt C, Schmid H-J, Peukert W. On the impact of accessible surface and surface energy on particle formation and growth from the vapour phase. Journal of Aerosol Science. 2005;36(2):147-172. doi:10.1016/j.jaerosci.2004.08.003
LibreCat | DOI
 
[10]
2004 | Journal Article | LibreCat-ID: 26155
Messerer A, Schmid H-J, Knab C, Pöschl U, Nießner R. Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen. Chemie Ingenieur Technik. 2004;76(8):1092-1096. doi:10.1002/cite.200403418
LibreCat | DOI
 
[9]
2004 | Journal Article | LibreCat-ID: 26152
Schmid H-J, Tejwani S, Artelt C, Peukert W. Monte Carlo simulation of aggregate morphology for simultaneous coagulation and sintering. Journal of Nanoparticle Research. 2004;6(6):613-626. doi:10.1007/s11051-004-2161-x
LibreCat | DOI
 
[8]
2004 | Journal Article | LibreCat-ID: 26154
Kirchhof MJ, Schmid H-J, Peukert W. Reactor system for the study of high-temperature short-time sintering of nanoparticles. Review of Scientific Instruments. 2004;75(11):4833-4840. doi:10.1063/1.1809258
LibreCat | DOI
 
[7]
2003 | Journal Article | LibreCat-ID: 26156
Schmid H-J, Vogel L. On the modelling of the particle dynamics in electro-hydrodynamic flow-fields: I. Comparison of Eulerian and Lagrangian modelling approach. Powder Technology. 2003;135/136:118-135. doi:10.1016/j.powtec.2003.08.009
LibreCat | DOI
 
[6]
2003 | Journal Article | LibreCat-ID: 26157
Schmid H-J. On the modelling of the particle dynamics in electro-hydrodynamic flow fields: II. Influences of inhomogeneities on electrostatic precipitation. Powder Technology. 2003;135/136:136-149. doi:10.1016/j.powtec.2003.08.010
LibreCat | DOI
 
[5]
2003 | Journal Article | LibreCat-ID: 26158
Peukert W, Schmid H-J. Herausforderungen für die Lehre am Beispiel der mechanischen Verfahrenstechnik. Chemie Ingenieur Technik. 2003;75(3):177-183. doi:10.1002/cite.200390035
LibreCat | DOI
 
[4]
2003 | Journal Article | LibreCat-ID: 26159
Artelt C, Schmid H-J, Peukert W. On the relevance of accounting for the evolution of the fractal dimension in aerosol process simulations. Journal of Aerosol Science. 2003;34(5):511-534. doi:10.1016/s0021-8502(03)00005-3
LibreCat | DOI
 
[3]
2002 | Book Chapter | LibreCat-ID: 26169
Schmid H-J. Trennprozesse: Abschnitt 7.5.3. In: Handbuch Der Mechanischen Verfahrenstechnik. ; 2002. doi:10.1002/3527603352.ch7r
LibreCat | DOI
 
[2]
2002 | Journal Article | LibreCat-ID: 26160
Schiel A, Weber AP, Kasper G, Schmid H-J. In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures. Particle & Particle Systems Characterization. 2002;19(6):410-418. doi:10.1002/ppsc.200290004
LibreCat | DOI
 
[1]
2002 | Journal Article | LibreCat-ID: 26161
Schmid H-J, Veith S, Umhauer H. In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow. Particle & Particle Systems Characterization. 2002;19(3). doi:10.1002/1521-4117(200207)19:3<203::aid-ppsc203>3.0.co;2-7
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed