Hans-Joachim Schmid

hans-joachim.schmid@uni-paderborn.de
ID
464

154 Publications

Mark all

[154]
2024 | Special Issue | LibreCat-ID: 51133
Tischendorf, Ricardo, et al., editors. “Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS).” Applications in Energy and Combustion Science, Elsevier, 2024, doi:https://doi.org/10.1016/j.jaecs.2023.100235.
LibreCat | DOI | Download (ext.)
 
[153]
2024 | Journal Article | LibreCat-ID: 52357 | OA
Beimdiek, Janis, and Hans-Joachim Schmid. “Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols.” Atmosphere, vol. 15, no. 3, 305, Multidisciplinary Digital Publishing Institute (MDPI), 2024, doi: 10.3390/atmos15030305.
LibreCat | DOI | Download (ext.)
 
[152]
2024 | Conference Abstract | LibreCat-ID: 56958
Neukötter, Moritz, et al. Particle-Induced Instabilities in Uniaxially Elongated Thermoplastic Polymer Blends . 2024.
LibreCat
 
[151]
2024 | Mastersthesis | LibreCat-ID: 51149
Reimer, Jens, et al. Entwicklung einer Datenbank hergestellter Nanomaterialien mittels Gasphasensynthese (Studienarbeit).
LibreCat
 
[150]
2023 | Conference Abstract | LibreCat-ID: 47626
Rüther, Moritz Johannes, et al. “Correlation between SLS-Powder Processability and Particle Properties .” PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, 2023, pp. 172–76.
LibreCat
 
[149]
2023 | Conference Paper | LibreCat-ID: 46764 | OA
Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, vol. 34, Laboratory for Freeform Fabrication and University of Texas, 2023.
LibreCat | Download (ext.)
 
[148]
2023 | Special Issue | LibreCat-ID: 51136
Fröde, Fabian, et al., editors. “Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame.” Applications in Energy and Combustion Science, Elsevier, 2023, doi:https://doi.org/10.1016/j.jaecs.2023.100191.
LibreCat | DOI | Download (ext.)
 
[147]
2023 | Conference Abstract | LibreCat-ID: 51145
Massopo, Orlando, et al. Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster). 2023.
LibreCat
 
[146]
2023 | Conference Abstract | LibreCat-ID: 51142
Massopo, Orlando, et al. Einfluss Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag). 2023.
LibreCat
 
[145]
2023 | Conference Abstract | LibreCat-ID: 51726
Beimdiek, Janis, et al. Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster). 2023.
LibreCat | Files available
 
[144]
2023 | Conference Paper | LibreCat-ID: 51727
Beimdiek, Janis, et al. Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System. VDI Verlag, 2023.
LibreCat | Files available
 
[143]
2023 | Conference Paper | LibreCat-ID: 51218 | OA
Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50931.
LibreCat | DOI | Download (ext.)
 
[142]
2023 | Conference Paper | LibreCat-ID: 46862 | OA
Neitzel, Fabian, et al. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50926.
LibreCat | DOI | Download (ext.)
 
[141]
2023 | Journal Article | LibreCat-ID: 36983 | OA
Josch, Sebastian, et al. “Experimental and Simulative Determination and Correction of the Effective Gap Extension in Structured Coaxial Measuring Systems.” Rheologica Acta, Springer Science and Business Media LLC, 2023, doi:10.1007/s00397-023-01383-2.
LibreCat | DOI | Download (ext.)
 
[140]
2023 | Conference Abstract | LibreCat-ID: 43236
Rüther, Torben, and Hans-Joachim Schmid. CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip Zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag). 2023.
LibreCat | Files available
 
[139]
2023 | Journal Article | LibreCat-ID: 43034 | OA
Josch, Sebastian, et al. “Development of an Adaptive Coaxial Concrete Rheometer and Rheological Characterisation of Fresh Concrete.” Applied Rheology, vol. 33, no. 1, Walter de Gruyter GmbH, 2023, doi:10.1515/arh-2022-0140.
LibreCat | DOI | Download (ext.)
 
[138]
2023 | Journal Article | LibreCat-ID: 43128
Rüther, Moritz Johannes, et al. “Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.” Powder Technology, vol. 422, 118460, Elsevier BV, 2023, doi:10.1016/j.powtec.2023.118460.
LibreCat | DOI
 
[137]
2023 | Conference Abstract | LibreCat-ID: 44244
Ponusamy, SathishKumar, and Hans-Joachim Schmid. Dynamisch-Mechanische Polymerpartikelverrundung Zur Verbesserung Der Fließfähigkeit Für Das Selektive Lasersintern. 2023.
LibreCat | Files available
 
[136]
2023 | Conference Abstract | LibreCat-ID: 44103
Neukötter, Moritz, et al. Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation). 2023.
LibreCat
 
[135]
2023 | Journal Article | LibreCat-ID: 46815 | OA
Kletetzka, Ivo, et al. “Influence of the Filler–Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass Bead Dry Blends.” Progress in Additive Manufacturing, Springer Science and Business Media LLC, 2023, doi:10.1007/s40964-023-00501-z.
LibreCat | DOI | Download (ext.)
 
[134]
2023 | Journal Article | LibreCat-ID: 43046 | OA
Klippstein, Sven Helge, et al. “Influence of a Prolonged Shelf Time on PA12 Laser Sintering Powder and Resulting Part Properties.” The International Journal of Advanced Manufacturing Technology , Springer, 2023, doi:https://doi.org/10.1007/s00170-023-11243-1.
LibreCat | DOI | Download (ext.)
 
[133]
2023 | Book Chapter | LibreCat-ID: 46870
Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:10.14361/9783839463772-007.
LibreCat | DOI
 
[132]
2023 | Conference Abstract | LibreCat-ID: 44102
Neukötter, Moritz, et al. Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster). 2023.
LibreCat
 
[131]
2023 | Journal Article | LibreCat-ID: 54632 | OA
Bentrup, Leon Alexander, et al. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.” die hochschullehre, no. 9, wbv Publikation, 2023, doi:10.3278/HSL2310W.
LibreCat | DOI | Download (ext.)
 
[130]
2023 | Conference Abstract | LibreCat-ID: 51147
Massopo, Orlando, et al. Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis (Presentation). 2023.
LibreCat
 
[129]
2022 | Conference Paper | LibreCat-ID: 30220 | OA
Kletetzka, Ivo, et al. “Effects of Spherical Fillers on the Processability and Mechanical Properties of PA613 and PP-Based LS Dry Blends.” Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:http://dx.doi.org/10.26153/tsw/44558.
LibreCat | DOI | Download (ext.)
 
[128]
2022 | Conference Paper | LibreCat-ID: 32874 | OA
Kletetzka, Ivo, et al. “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder.” Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:http://dx.doi.org/10.26153/tsw/44555.
LibreCat | DOI | Download (ext.)
 
[127]
2022 | Journal Article | LibreCat-ID: 31035 | OA
Neukötter, Moritz, et al. “Model Droplet Formation in Extensional Filament Stretching within a Filament Extension Atomizer.” Rheologica Acta, Springer Science and Business Media LLC, 2022, doi:10.1007/s00397-022-01339-y.
LibreCat | DOI | Download (ext.)
 
[126]
2022 | Conference Abstract | LibreCat-ID: 37424
Beimdiek, Janis, and Hans-Joachim Schmid. A Combined Flue Gas Cleaning System with a Novel Entrained Flow SCR Using an Online Synthesized Catalyst (Poster). 2022.
LibreCat | Files available
 
[125]
2022 | Journal Article | LibreCat-ID: 35729
Rüther, Moritz Johannes, et al. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2.” Werkstoffe, vol. 6, HW-Verlag, 2022, pp. 18–19.
LibreCat | Download (ext.)
 
[124]
2022 | Journal Article | LibreCat-ID: 35724
Rüther, Moritz Johannes, et al. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1.” Werkstoffe, vol. 5, HW-Verlag, 2022, pp. 28–29.
LibreCat | Download (ext.)
 
[123]
2022 | Conference Paper | LibreCat-ID: 37436
Beimdiek, Janis, et al. “Combined Filtration Process for Biomass Combustion Plants to Comply with Legal Requirements (Presentation).” 13th World Filtration Congress Proceedings, 2022.
LibreCat | Files available
 
[122]
2022 | Conference Abstract | LibreCat-ID: 37426
Beimdiek, Janis, and Hans-Joachim Schmid. “A Combined Flue Gas Cleaning System with a Novel Entrained Flow SCR Using Online Synthesized Catalyst Particles (Poster).” IAC 2022 Book of Abstacts, 2022.
LibreCat | Files available
 
[121]
2022 | Conference Abstract | LibreCat-ID: 37432
Beimdiek, Janis, and Hans-Joachim Schmid. Novel Entrained Flow SCR Using Online Synthesized Catalyst Particles (Poster). 2022.
LibreCat | Files available
 
[120]
2022 | Conference Abstract | LibreCat-ID: 37430
Beimdiek, Janis, and Hans-Joachim Schmid. Novel Entrained Flow SCR Using Online Synthesized Catalyst Particles in Flue Gas Cleaning Systems (Presentation). 2022.
LibreCat
 
[119]
2022 | Conference Abstract | LibreCat-ID: 41160
Neukötter, Moritz, et al. Triggering Instabilities of Polymer Solution Suspensions under Uniaxial Extension  (Presentation). 2022.
LibreCat | Files available
 
[118]
2022 | Conference Abstract | LibreCat-ID: 41158
Neukötter, Moritz, et al. Instability Analysis of Suspensions with a Polymer Solution Matrix (Presentation). 2022.
LibreCat | Files available
 
[117]
2022 | Conference Abstract | LibreCat-ID: 33695
Rüther, Moritz Johannes, et al. Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing. Edited by Moritz Johannes Rüther et al., 2022.
LibreCat
 
[116]
2022 | Conference Abstract | LibreCat-ID: 43238
Rüther, Torben, et al. A Novel Correction Method for the Shear Rate in a Couette Rheometer (Vortrag). 2022.
LibreCat | Files available
 
[115]
2022 | Conference Abstract | LibreCat-ID: 43243
Rüther, Torben, and Hans-Joachim Schmid. Multidimensional Particle Characterization: Centrifugal Differential Mobility Analyzer (Poster). 2022.
LibreCat | Files available
 
[114]
2022 | Conference Abstract | LibreCat-ID: 43240
Rüther, Torben, et al. NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag). 2022.
LibreCat | Files available
 
[113]
2022 | Journal Article | LibreCat-ID: 30228
Klippstein, Sven Helge, et al. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, Springer, 2022, pp. 1149–1157, doi:https://doi.org/10.1007/s11837-021-05042-w .
LibreCat | DOI
 
[112]
2022 | Conference Paper | LibreCat-ID: 33356 | OA
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, 2022.
LibreCat | Download (ext.)
 
[111]
2022 | Journal Article | LibreCat-ID: 44468
Schmidt, Stephan, et al. “A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges.” SIAM Journal on Scientific Computing, vol. 44, no. 4, Society for Industrial & Applied Mathematics (SIAM), 2022, pp. B1175–94, doi:10.1137/20m1389054.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 44469
Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering with PA12 and PA6 on a Standard System.” Macromolecular Symposia, vol. 404, no. 1, 2100397, Wiley, 2022, doi:10.1002/masy.202100397.
LibreCat | DOI
 
[109]
2021 | Journal Article | LibreCat-ID: 25142
Kummert, Christina, et al. “Mechanical Characterization and Numerical Modeling of Laser-Sintered TPE Lattice Structures.” Journal of Materials Research, 2021, doi:10.1557/s43578-021-00321-3.
LibreCat | DOI
 
[108]
2021 | Conference Paper | LibreCat-ID: 23760 | OA
Menge, Dennis, and Hans-Joachim Schmid. Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12. 2021.
LibreCat | Download (ext.)
 
[107]
2021 | Conference Abstract | LibreCat-ID: 30364
Tischendorf, Ricardo, et al. Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen. 2021.
LibreCat
 
[106]
2021 | Misc | LibreCat-ID: 24202
Pawelczyk, Sebastian, et al. Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention. 2021.
LibreCat | Files available
 
[105]
2021 | Conference Abstract | LibreCat-ID: 30225
Rüther, Moritz Johannes, et al. Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester. 2021.
LibreCat
 
[104]
2021 | Conference Paper | LibreCat-ID: 24160 | OA
Kletetzka, Ivo, et al. “Laser Sintering Design Guidelines for Media Transmitting Components.” Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, vol. 32, Laboratory for Freeform Fabrication and University of Texas, 2021, doi:http://dx.doi.org/10.26153/tsw/17548.
LibreCat | DOI | Download (ext.)
 
[103]
2021 | Journal Article | LibreCat-ID: 26095
Schumacher, Stefan, et al. “Effektivität von Luftreinigern Zur Reduzierung Des COVID-19-Infektionsrisikos/ Efficacy of Air Purifiers in Reducing the Risk of COVID-19 Infections.” Gefahrstoffe, 2021, pp. 16–28, doi:10.37544/0949-8036-2021-01-02-18.
LibreCat | DOI
 
[102]
2021 | Conference Abstract | LibreCat-ID: 27551
Ludwig, Janis, et al. “Assessing Spreading and Removal of Virus Laden Aerosols in Different Settings Using an Aerosol Method (Presentation).” Book of Abstracts for the 2021 European Aerosol Conference, edited by The Aerosol Society, 2021.
LibreCat | Files available
 
[101]
2021 | Conference Abstract | LibreCat-ID: 27553
Ludwig, Janis, and Hans-Joachim Schmid. Synthese und asymmetrische Funktionalisierung von submikronen Janus-Polymer-Partikeln in der Gasphase (Poster). 2021.
LibreCat
 
[100]
2021 | Conference Abstract | LibreCat-ID: 24475
Neukötter, Moritz, et al. Theoretische Beschreibung Des Tropfenbildungsprozesses Bei Der Filament Extension Atomization: Entwicklung Eines Vorhersagemodells Für Die Tropfengröße (Poster). 2021.
LibreCat | Files available
 
[99]
2021 | Conference Abstract | LibreCat-ID: 30221
Neukötter, Moritz, et al. Filament Extension Atomization – A Novel Process for Powder Production? (Presentation). 2021.
LibreCat | Files available
 
[98]
2020 | Report | LibreCat-ID: 24943
Menge, Dennis, et al. Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat | Download (ext.)
 
[97]
2020 | Journal Article | LibreCat-ID: 24241
Rasche, David B., et al. “An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output.” Review of Scientific Instruments, vol. 91, AIP Publishing, 2020, p. 055104, doi:10.1063/1.5133438.
LibreCat | DOI
 
[96]
2020 | Conference Paper | LibreCat-ID: 22182
Kummert, Christina, et al. “Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2020, pp. 735–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf.
LibreCat | DOI
 
[95]
2020 | Conference Abstract | LibreCat-ID: 25062
Tischendorf, Ricardo, et al. Influence of Differing Nozzle Configurations on the Final Particle Characteristics and Particle Structure Evolution in Spray Flames. 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, 2020.
LibreCat | Files available
 
[94]
2020 | Journal Article | LibreCat-ID: 21949 | OA
Haist, Michael, et al. “Interlaboratory Study on Rheological Properties of Cement Pastes and Reference Substances: Comparability of Measurements Performed with Different Rheometers and Measurement Geometries.” Materials and Structures, 2020, doi:10.1617/s11527-020-01477-w.
LibreCat | DOI | Download (ext.)
 
[93]
2020 | Journal Article | LibreCat-ID: 21948 | OA
Pawelczyk, Sebastian, et al. “Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures.” Materials, 467, 2020, doi:10.3390/ma13020467.
LibreCat | DOI | Download (ext.)
 
[92]
2019 | Report | LibreCat-ID: 24628
Menge, Dennis, et al. FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen. 2019.
LibreCat
 
[91]
2019 | Book Chapter | LibreCat-ID: 26098
Schmid, Hans-Joachim, et al. “Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges.” Particles in Contact, 2019, doi:10.1007/978-3-030-15899-6_2.
LibreCat | DOI
 
[90]
2019 | Conference Paper | LibreCat-ID: 22198
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Methodik Zur Qualifizierung Des Lasersinter Prozesses Für Die Serienfertigung.” Proceedings of the 16th Rapid.Tech Conference, 2019, doi:10.3139/9783446462441.025.
LibreCat | DOI
 
[89]
2019 | Conference Abstract | LibreCat-ID: 24515
Tischendorf, Ricardo, et al. Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements. PARTEC 2019 International Congress on Particle Technology, 2019.
LibreCat | Files available
 
[88]
2019 | Conference Paper | LibreCat-ID: 22202
Klippstein, Sven Helge, et al. “Devolopment, Production and Post-Processing of a Topology Optimized Aircraft Bracket .” 30th Annual International Solid Freeform Fabrication Symposium, vol. 30, 2019, pp. 1932–45.
LibreCat | Download (ext.)
 
[87]
2019 | Journal Article | LibreCat-ID: 22541
Giner, Ignacio, et al. “Water Adsorption and Capillary Bridge Formation on Silica Micro-Particle Layers Modified with Perfluorinated Organosilane Monolayers.” Applied Surface Science, 2019, pp. 873–79, doi:10.1016/j.apsusc.2018.12.221.
LibreCat | DOI
 
[86]
2018 | Journal Article | LibreCat-ID: 26103
Abishek, S., et al. “Representative Domain Size for the Simulation of Coalescence Filtration in Nonwoven and Foam Media.” Separation and Purification Technology, 2018, pp. 344–52, doi:10.1016/j.seppur.2018.06.051.
LibreCat | DOI
 
[85]
2018 | Conference Paper | LibreCat-ID: 22183 | OA
Menge, Dennis, et al. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 687–97.
LibreCat | Download (ext.)
 
[84]
2018 | Journal Article | LibreCat-ID: 22196
Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, Springer, 2018, pp. 425–30, doi:10.1007/s11837-017-2658-2.
LibreCat | DOI
 
[83]
2018 | Patent | LibreCat-ID: 29824
Schmid, Hans-Joachim, and David Rasche. Bestimmung von Nanopartikeleigenschaften Eines Aerosols. 2018.
LibreCat | Files available
 
[82]
2017 | Book Chapter | LibreCat-ID: 26104
Lohn, Johannes, and Hans-Joachim Schmid. “Aufbau Einer Lasersinter-Versuchsanlage Und Verarbeitung Neuer Materialien Am Beispiel von Polyamid 6 Und Polyamid 613.” Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 2017, doi:10.3139/9783446454606.023.
LibreCat | DOI
 
[81]
2017 | Journal Article | LibreCat-ID: 26106
Laube, Jens, et al. “Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity.” The Journal of Physical Chemistry C, 2017, pp. 15294–303, doi:10.1021/acs.jpcc.7b05655.
LibreCat | DOI
 
[80]
2017 | Journal Article | LibreCat-ID: 26107
Dörmann, Michael, and Hans-Joachim Schmid. “Distance-Dependency of Capillary Bridges in Thermodynamic Equilibrium.” Powder Technology, 2017, pp. 175–83, doi:10.1016/j.powtec.2017.01.012.
LibreCat | DOI
 
[79]
2017 | Book Chapter | LibreCat-ID: 23759
Menge, Dennis, et al. “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, edited by Hans Albert Richard et al., Springer Vieweg, 2017, pp. 105–20, doi:10.1007/978-3-658-17780-5.
LibreCat | DOI
 
[78]
2017 | Journal Article | LibreCat-ID: 22195
Josupeit, Stefan, and Hans-Joachim Schmid. “Experimental Analysis and Modeling of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual Thermal Histories.” Journal of Applied Polymer Science, vol. 134, no. 42, Wiley, 2017, doi:10.1002/app.45435.
LibreCat | DOI
 
[77]
2016 | Journal Article | LibreCat-ID: 26109
Josupeit, Stefan, et al. “Modelling of Temperatures and Heat Flow within Laser Sintered Part Cakes.” Additive Manufacturing, 2016, pp. 189–96, doi:10.1016/j.addma.2016.06.002.
LibreCat | DOI
 
[76]
2016 | Journal Article | LibreCat-ID: 26111
Schmid, Hans-Joachim, and S. Pieper. “Guard Ring Induced Distortion of the Steady Velocity Profile in a Parallel Plate Rheometer.” Applied Rheology, 2016, doi:10.3933/APPLRHEOL-26-64533.
LibreCat | DOI
 
[75]
2016 | Journal Article | LibreCat-ID: 26118
Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal Suspensions in a Parallel Plate Rheometer under Steady Shear.” Journal of Non-Newtonian Fluid Mechanics, 2016, pp. 1–7, doi:10.1016/j.jnnfm.2016.04.004.
LibreCat | DOI
 
[74]
2016 | Book | LibreCat-ID: 27443
Gausemeier, Jürgen, et al. Additive Fertigung. acatech - Deutsche Akademie der Technikwissenschaften, 2016.
LibreCat
 
[73]
2016 | Conference Paper | LibreCat-ID: 22180
Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.
LibreCat | DOI
 
[72]
2016 | Journal Article | LibreCat-ID: 22185
Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.” Additive Manufacturing, vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:10.1016/j.addma.2016.06.003.
LibreCat | DOI
 
[71]
2016 | Conference Paper | LibreCat-ID: 22190
Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .” Fraunhofer Direct Digital Manufacturing Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.
LibreCat | DOI
 
[70]
2016 | Conference Paper | LibreCat-ID: 22194
Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 
[69]
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.
LibreCat | DOI
 
[68]
2016 | Conference Paper | LibreCat-ID: 22404
Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.” EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
LibreCat | DOI
 
[67]
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[66]
2016 | Book (Editor) | LibreCat-ID: 26113
Kniffka, Wieland, et al., editors. Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures. 2016, doi:10.3139/9783446450608.009.
LibreCat | DOI
 
[65]
2016 | Journal Article | LibreCat-ID: 21947
Jesinghausen, Steffen, et al. “Direct Measurement of Wall Slip and Slip Layer Thickness of Non-Brownian Hard-Sphere Suspensions in Rectangular Channel Flows.” Experiments in Fluids, 2016, doi:10.1007/s00348-016-2241-6.
LibreCat | DOI | Download (ext.)
 
[64]
2016 | Journal Article | LibreCat-ID: 25140
Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal Suspensions in a Parallel Plate Rheometer under Steady Shear.” Journal of Non-Newtonian Fluid Mechanics, 2016, pp. 1–7, doi:10.1016/j.jnnfm.2016.04.004.
LibreCat | DOI
 
[63]
2015 | Journal Article | LibreCat-ID: 26108
Schiller, Sascha, et al. “Evaluation of the Efficiency of Filtration Processes Using Precoat Materials.” Chemical Engineering & Technology, 2015, pp. 491–98, doi:10.1002/ceat.201500385.
LibreCat | DOI
 
[62]
2015 | Book Chapter | LibreCat-ID: 26119
Erler, Jacqueline V., et al. “Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols.” Colloid Process Engineering, 2015, doi:10.1007/978-3-319-15129-8_16.
LibreCat | DOI
 
[61]
2015 | Journal Article | LibreCat-ID: 26121
Tigges, L., et al. “Bipolar Charge Distribution of a Soft X-Ray Diffusion Charger.” Journal of Aerosol Science, 2015, pp. 77–86, doi:10.1016/j.jaerosci.2015.07.002.
LibreCat | DOI
 
[60]
2015 | Journal Article | LibreCat-ID: 26122
Tigges, L., et al. “On the Bipolar Charge Distribution Used for Mobility Particle Sizing: Theoretical Considerations.” Journal of Aerosol Science, 2015, pp. 119–34, doi:10.1016/j.jaerosci.2015.05.010.
LibreCat | DOI
 
[59]
2015 | Journal Article | LibreCat-ID: 26123
Schiller, Sascha, and Hans-Joachim Schmid. “Highly Efficient Filtration of Ultrafine Dust in Baghouse Filters Using Precoat Materials.” Powder Technology, 2015, pp. 96–105, doi:10.1016/j.powtec.2015.03.048.
LibreCat | DOI
 
[58]
2015 | Journal Article | LibreCat-ID: 26124
Dörmann, Michael, and Hans-Joachim Schmid. “Simulation of Capillary Bridges between Particles.” Procedia Engineering, 2015, pp. 14–23, doi:10.1016/j.proeng.2015.01.102.
LibreCat | DOI
 
[57]
2015 | Conference Paper | LibreCat-ID: 22178
Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
LibreCat | DOI
 
[56]
2015 | Conference Paper | LibreCat-ID: 22179
Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
LibreCat | DOI
 
[55]
2015 | Conference Paper | LibreCat-ID: 22187
Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
LibreCat | DOI
 
[54]
2015 | Conference Paper | LibreCat-ID: 22189
Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
LibreCat | DOI
 
[53]
2015 | Conference Paper | LibreCat-ID: 22199
Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.” Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.
LibreCat | DOI
 
[52]
2015 | Conference Paper | LibreCat-ID: 23074
Koke, Isabel, et al. “Tutorenprogramm Und Vertiefungsberatung Stellen Weichen in Entscheidenden Phasen Des Student Life-Cycles in Maschinenbaustudiengängen.” 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015.
LibreCat
 
[51]
2014 | Journal Article | LibreCat-ID: 26125
Pieper, Sven, et al. “Absence of Pressure Sensitivity of Apparent Wall Slip in Pressure-Driven Flow of Non-Colloidal Suspensions.” Rheologica Acta, 2014, pp. 69–75, doi:10.1007/s00397-014-0815-x.
LibreCat | DOI
 
[50]
2014 | Journal Article | LibreCat-ID: 26126
Schiller, Sascha, and Hans-Joachim Schmid. “Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media.” Chemical Engineering & Technology, 2014, pp. 1009–20, doi:10.1002/ceat.201300856.
LibreCat | DOI
 
[49]
2014 | Journal Article | LibreCat-ID: 26127
Dörmann, Michael, and Hans-Joachim Schmid. “Simulation of Capillary Bridges between Nanoscale Particles.” Langmuir, 2014, pp. 1055–62, doi:10.1021/la404409k.
LibreCat | DOI
 
[48]
2014 | Conference Paper | LibreCat-ID: 22176
Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat | DOI
 
[47]
2014 | Conference Paper | LibreCat-ID: 22177
Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature Measurement of Laser Sintered Part Cakes.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
LibreCat | DOI
 
[46]
2014 | Conference Paper | LibreCat-ID: 22184
Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence on Part Quality Characteristics.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no. 3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
LibreCat | DOI
 
[45]
2014 | Journal Article | LibreCat-ID: 22186
Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer Laser Sintering Process .” Advances in Mechanical Engineering, vol. 6, SAGE Publications, 2014, pp. 1687–8140, doi:10.1155/2014/185374.
LibreCat | DOI
 
[44]
2014 | Conference Paper | LibreCat-ID: 22193
Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser Sintering Cooling Process.” International Conference on Additive Technologies, vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
LibreCat | DOI
 
[43]
2014 | Conference Paper | LibreCat-ID: 22203
Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat | DOI
 
[42]
2013 | Journal Article | LibreCat-ID: 26129
Erler, Jacqueline, et al. “Liquid–Liquid Phase Transfer of Magnetite Nanoparticles — Evaluation of Surfactants.” Powder Technology, vol. 247, 2013, pp. 265–69, doi:10.1016/j.powtec.2012.09.047.
LibreCat | DOI
 
[41]
2013 | Journal Article | LibreCat-ID: 26130
Schiller, Sascha, and Hans-Joachim Schmid. “Hocheffiziente Feinstaubabscheidung Aus Kleinfeuerungsanlagen Mit Einem Schlauchfilter.” Chemie Ingenieur Technik, 2013, pp. 1324–28, doi:10.1002/cite.201200114.
LibreCat | DOI
 
[40]
2013 | Conference Paper | LibreCat-ID: 22175
Josupeit, Stefan, et al. “A Material-Based Quality Concept for Polymer Laser Sintering.” 24th Annual International Solid Freeform Fabrication Symposium , vol. 24, 2013, pp. 44–54, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf.
LibreCat | DOI
 
[39]
2013 | Conference Paper | LibreCat-ID: 22192
Rüsenberg, Stefan, and Hans-Joachim Schmid. “Advanced Characterization Method of Nylon 12 Materials for Application in Laser Sinter Processing.” International Conference of the Polymer-Processing-Society (PPS), vol. 29, 2013, doi:10.1063/1.4873877.
LibreCat | DOI
 
[38]
2013 | Conference Paper | LibreCat-ID: 22197
Josupeit, Stefan, et al. “Mechanische Und Rheologische Untersuchungen Neuer Laser Sinter Materialien.” Merseburger Rapid Prototyping Forum, vol. 7, 2013, doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf.
LibreCat | DOI
 
[37]
2013 | Conference Paper | LibreCat-ID: 22201
Rüsenberg, Stefan, et al. “Additiv versus Konventionell: Benchmarking Am Beispiel Eines Designs Aus Der Luftfahrtindustrie.” RapidTech, 2013.
LibreCat
 
[36]
2012 | Journal Article | LibreCat-ID: 26132
Kirchhoff, Nadine, et al. “Wood-Plastic-Composites: Rheologische Charakterisierung Und Füllverhalten Im Spritzgießprozess.” Chemie Ingenieur Technik, 2012, pp. 1584–89, doi:10.1002/cite.201100223.
LibreCat | DOI
 
[35]
2012 | Journal Article | LibreCat-ID: 26133
Kirchhof, M. J., et al. “Sintering Kinetics and Mechanism of Vitreous Nanoparticles.” Journal of Aerosol Science, vol. 45, 2012, pp. 26–39, doi:10.1016/j.jaerosci.2011.10.006.
LibreCat | DOI
 
[34]
2012 | Conference Paper | LibreCat-ID: 22174
Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts Along the Process Chain.” 23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 1024–44, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
LibreCat | DOI
 
[33]
2012 | Conference Paper | LibreCat-ID: 22204
Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result of Multitude of Parameters.” The European Forum on Additive Manufacturing, vol. 17, 2012, doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
LibreCat | DOI
 
[32]
2011 | Conference Paper | LibreCat-ID: 22188
Rüsenberg, Stefan, et al. “Mechanical and Physical Properties - A Way to Asses Quality of Laser Sintered Parts.” 22th Annual International Solid Freeform Fabrication Symposium, vol. 22, 2011, pp. 239–51, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf.
LibreCat | DOI
 
[31]
2011 | Book | LibreCat-ID: 22191
Rüsenberg, Stefan, et al. Porosity as a Key to Increase Material Properties of Laser Sintered Parts. 2011, pp. 531–38, doi:10.1201/b11341.
LibreCat | DOI
 
[30]
2010 | Journal Article | LibreCat-ID: 26134
Körmer, R., et al. “Aerosol Synthesis of Silicon Nanoparticles with Narrow Size Distribution—Part 2: Theoretical Analysis of the Formation Mechanism.” Journal of Aerosol Science, vol. 41, no. 11, 2010, pp. 1008–19, doi:10.1016/j.jaerosci.2010.08.002.
LibreCat | DOI
 
[29]
2010 | Journal Article | LibreCat-ID: 26135
Körmer, R., et al. “Aerosol Synthesis of Silicon Nanoparticles with Narrow Size Distribution—Part 1: Experimental Investigations.” Journal of Aerosol Science, vol. 41, no. 11, 2010, pp. 998–1007, doi:10.1016/j.jaerosci.2010.05.007.
LibreCat | DOI
 
[28]
2010 | Journal Article | LibreCat-ID: 26136
Seipenbusch, M., et al. “Interparticle Forces in Silica Nanoparticle Agglomerates.” Journal of Nanoparticle Research, vol. 12, no. 6, 2010, pp. 2037–44, doi:10.1007/s11051-009-9760-5.
LibreCat | DOI
 
[27]
2010 | Book Review | LibreCat-ID: 58272
Woppowa, Jan, and Hans-Joachim Schmid. “Gastfreundschaft. Ein Modell für den konfessionellen Religionsunterricht der Zukunft.” rhs, vol. 54, no. 2011, 2010, pp. 139–40.
LibreCat
 
[26]
2009 | Journal Article | LibreCat-ID: 26137
Vassilev, Vassil, et al. “Interfacial Energy Estimation in a Precipitation Reaction Using the Flatness Based Control of the Moment Trajectories.” Chemical Engineering Science, vol. 65, no. 6, 2009, pp. 2183–89, doi:10.1016/j.ces.2009.12.014.
LibreCat | DOI
 
[25]
2009 | Journal Article | LibreCat-ID: 26138
Al Zaitone, Belal, et al. “Simulation of Structure and Mobility of Aggregates Formed by Simultaneous Coagulation, Sintering and Surface Growth.” Journal of Aerosol Science, vol. 40, no. 11, 2009, pp. 950–64, doi:10.1016/j.jaerosci.2009.08.007.
LibreCat | DOI
 
[24]
2009 | Journal Article | LibreCat-ID: 26139
Machunsky, Stefanie, et al. “Liquid–Liquid Phase Transfer of Magnetite Nanoparticles.” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 348, no. 1–3, 2009, pp. 186–90, doi:10.1016/j.colsurfa.2009.07.014.
LibreCat | DOI
 
[23]
2009 | Journal Article | LibreCat-ID: 26140
Kirchhof, M. J., et al. “Three-Dimensional Simulation of Viscous-Flow Agglomerate Sintering.” Physical Review E, vol. 80, no. 2, 2009, p. 026319, doi:10.1103/physreve.80.026319.
LibreCat | DOI
 
[22]
2008 | Journal Article | LibreCat-ID: 26142
Horn, M., and Hans-Joachim Schmid. “A Comprehensive Approach in Modeling Lagrangian Particle Deposition in Turbulent Boundary Layers.” Powder Technology, vol. 186, no. 3, 2008, pp. 189–98, doi:10.1016/j.powtec.2007.11.048.
LibreCat | DOI
 
[21]
2007 | Journal Article | LibreCat-ID: 26147
Schneider, L., et al. “Influence of Particle Size and Concentration on the Second-Harmonic Signal Generated at Colloidal Surfaces.” Applied Physics B, vol. 87, 2007, pp. 333–39, doi:10.1007/s00340-007-2597-7.
LibreCat | DOI
 
[20]
2007 | Journal Article | LibreCat-ID: 29827
Schmid, Hans-Joachim. “Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter.” Gefahrstoffe, Reinhaltung der Luft. Air Quality Control, vol. 67, no. 4, 2007.
LibreCat
 
[19]
2006 | Journal Article | LibreCat-ID: 26145
Binder, Christian, et al. “Simulation of the Hydrodynamic Drag of Aggregated Particles.” Journal of Colloid and Interface Science, vol. 301, no. 1, 2006, pp. 155–67, doi:10.1016/j.jcis.2006.04.045.
LibreCat | DOI
 
[18]
2006 | Journal Article | LibreCat-ID: 26148
Horn, M., and Hans-Joachim Schmid. “Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen.” Chemie Ingenieur Technik, vol. 78, no. 6, 2006, pp. 694–99, doi:10.1002/cite.200500110.
LibreCat | DOI
 
[17]
2006 | Journal Article | LibreCat-ID: 26150
Artelt, C., et al. “Modelling Titania Formation at Typical Industrial Process Conditions: Effect of Surface Shielding and Surface Energy on Relevant Growth Mechanisms.” Chemical Engineering Science, vol. 61, no. 1, 2006, pp. 18–32, doi:10.1016/j.ces.2004.12.053.
LibreCat | DOI
 
[16]
2005 | Journal Article | LibreCat-ID: 26149
Schwarzer, Hans-Christoph, et al. “Predictive Simulation of Nanoparticle Precipitation Based on the Population Balance Equation.” Chemical Engineering Science, vol. 61, no. 1, 2005, pp. 167–81, doi:10.1016/j.ces.2004.11.064.
LibreCat | DOI
 
[15]
2005 | Journal Article | LibreCat-ID: 26151
Schmid, Hans-Joachim, et al. “Evolution of the Fractal Dimension for Simultaneous Coagulation and Sintering.” Chemical Engineering Science, vol. 61, no. 1, 2005, pp. 293–305, doi:10.1016/j.ces.2004.11.068.
LibreCat | DOI
 
[14]
2005 | Journal Article | LibreCat-ID: 26153
Artelt, C., et al. “On the Impact of Accessible Surface and Surface Energy on Particle Formation and Growth from the Vapour Phase.” Journal of Aerosol Science, vol. 36, no. 2, 2005, pp. 147–72, doi:10.1016/j.jaerosci.2004.08.003.
LibreCat | DOI
 
[13]
2004 | Journal Article | LibreCat-ID: 26152
Schmid, Hans-Joachim, et al. “Monte Carlo Simulation of Aggregate Morphology for Simultaneous Coagulation and Sintering.” Journal of Nanoparticle Research, vol. 6, no. 6, 2004, pp. 613–26, doi:10.1007/s11051-004-2161-x.
LibreCat | DOI
 
[12]
2004 | Journal Article | LibreCat-ID: 26154
Kirchhof, Martin J., et al. “Reactor System for the Study of High-Temperature Short-Time Sintering of Nanoparticles.” Review of Scientific Instruments, vol. 75, no. 11, 2004, pp. 4833–40, doi:10.1063/1.1809258.
LibreCat | DOI
 
[11]
2004 | Journal Article | LibreCat-ID: 26155
Messerer, A., et al. “Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen.” Chemie Ingenieur Technik, vol. 76, no. 8, 2004, pp. 1092–96, doi:10.1002/cite.200403418.
LibreCat | DOI
 
[10]
2003 | Journal Article | LibreCat-ID: 26156
Schmid, Hans-Joachim, and Lutz Vogel. “On the Modelling of the Particle Dynamics in Electro-Hydrodynamic Flow-Fields: I. Comparison of Eulerian and Lagrangian Modelling Approach.” Powder Technology, vol. 135/136, 2003, pp. 118–35, doi:10.1016/j.powtec.2003.08.009.
LibreCat | DOI
 
[9]
2003 | Journal Article | LibreCat-ID: 26157
Schmid, Hans-Joachim. “On the Modelling of the Particle Dynamics in Electro-Hydrodynamic Flow Fields: II. Influences of Inhomogeneities on Electrostatic Precipitation.” Powder Technology, vol. 135/136, 2003, pp. 136–49, doi:10.1016/j.powtec.2003.08.010.
LibreCat | DOI
 
[8]
2003 | Journal Article | LibreCat-ID: 26158
Peukert, W., and Hans-Joachim Schmid. “Herausforderungen Für Die Lehre Am Beispiel Der Mechanischen Verfahrenstechnik.” Chemie Ingenieur Technik, vol. 75, no. 3, 2003, pp. 177–83, doi:10.1002/cite.200390035.
LibreCat | DOI
 
[7]
2003 | Journal Article | LibreCat-ID: 26159
Artelt, C., et al. “On the Relevance of Accounting for the Evolution of the Fractal Dimension in Aerosol Process Simulations.” Journal of Aerosol Science, vol. 34, no. 5, 2003, pp. 511–34, doi:10.1016/s0021-8502(03)00005-3.
LibreCat | DOI
 
[6]
2002 | Journal Article | LibreCat-ID: 26160
Schiel, Annette, et al. “In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures.” Particle & Particle Systems Characterization, vol. 19, no. 6, 2002, pp. 410–18, doi:10.1002/ppsc.200290004.
LibreCat | DOI
 
[5]
2002 | Journal Article | LibreCat-ID: 26161
Schmid, Hans-Joachim, et al. “In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow.” Particle & Particle Systems Characterization, vol. 19, no. 3, 203, 2002, doi:10.1002/1521-4117(200207)19:3<203::aid-ppsc203>3.0.co;2-7.
LibreCat | DOI
 
[4]
2002 | Book Chapter | LibreCat-ID: 26169
Schmid, Hans-Joachim. “Trennprozesse: Abschnitt 7.5.3.” Handbuch Der Mechanischen Verfahrenstechnik, 2002, doi:10.1002/3527603352.ch7r.
LibreCat | DOI
 
[3]
2002 | Journal Article | LibreCat-ID: 29826
Schmid, Hans-Joachim, and Wolfgang Peukert. “Novel Concepts for Teaching Particle Technology .” Chemical Engineering Education, vol. 36, no. 4, 2002.
LibreCat | Download (ext.)
 
[2]
2002 | Journal Article | LibreCat-ID: 29484
Schmid, Hans-Joachim. “On the Modelling of the Electro-Hydrodynamic Flow Field in Electrostatic Precipitators.” Flow, Turbulence and Combustion, vol. 68, Springer, 2002, pp. 63–89, doi:10.1023/A:1015666116174.
LibreCat | DOI
 
[1]
1998 | Dissertation | LibreCat-ID: 29825
Schmid, Hans-Joachim. Zum Partikeltransport in Elektrischen Abscheidern. Shaker Verlag, 1998.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed

154 Publications

Mark all

[154]
2024 | Special Issue | LibreCat-ID: 51133
Tischendorf, Ricardo, et al., editors. “Maghemite Nanoparticles Synthesis via Spray Flame Synthesis and Particle Characterization by Hole in a Tube Sampling and Scanning Mobility Particle Sizing (HIAT-SMPS).” Applications in Energy and Combustion Science, Elsevier, 2024, doi:https://doi.org/10.1016/j.jaecs.2023.100235.
LibreCat | DOI | Download (ext.)
 
[153]
2024 | Journal Article | LibreCat-ID: 52357 | OA
Beimdiek, Janis, and Hans-Joachim Schmid. “Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols.” Atmosphere, vol. 15, no. 3, 305, Multidisciplinary Digital Publishing Institute (MDPI), 2024, doi: 10.3390/atmos15030305.
LibreCat | DOI | Download (ext.)
 
[152]
2024 | Conference Abstract | LibreCat-ID: 56958
Neukötter, Moritz, et al. Particle-Induced Instabilities in Uniaxially Elongated Thermoplastic Polymer Blends . 2024.
LibreCat
 
[151]
2024 | Mastersthesis | LibreCat-ID: 51149
Reimer, Jens, et al. Entwicklung einer Datenbank hergestellter Nanomaterialien mittels Gasphasensynthese (Studienarbeit).
LibreCat
 
[150]
2023 | Conference Abstract | LibreCat-ID: 47626
Rüther, Moritz Johannes, et al. “Correlation between SLS-Powder Processability and Particle Properties .” PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, 2023, pp. 172–76.
LibreCat
 
[149]
2023 | Conference Paper | LibreCat-ID: 46764 | OA
Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, vol. 34, Laboratory for Freeform Fabrication and University of Texas, 2023.
LibreCat | Download (ext.)
 
[148]
2023 | Special Issue | LibreCat-ID: 51136
Fröde, Fabian, et al., editors. “Large Eddy Simulation of Iron Oxide Formation in a Laboratory Spray Flame.” Applications in Energy and Combustion Science, Elsevier, 2023, doi:https://doi.org/10.1016/j.jaecs.2023.100191.
LibreCat | DOI | Download (ext.)
 
[147]
2023 | Conference Abstract | LibreCat-ID: 51145
Massopo, Orlando, et al. Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster). 2023.
LibreCat
 
[146]
2023 | Conference Abstract | LibreCat-ID: 51142
Massopo, Orlando, et al. Einfluss Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag). 2023.
LibreCat
 
[145]
2023 | Conference Abstract | LibreCat-ID: 51726
Beimdiek, Janis, et al. Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster). 2023.
LibreCat | Files available
 
[144]
2023 | Conference Paper | LibreCat-ID: 51727
Beimdiek, Janis, et al. Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System. VDI Verlag, 2023.
LibreCat | Files available
 
[143]
2023 | Conference Paper | LibreCat-ID: 51218 | OA
Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50931.
LibreCat | DOI | Download (ext.)
 
[142]
2023 | Conference Paper | LibreCat-ID: 46862 | OA
Neitzel, Fabian, et al. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, edited by Joseph Beaman, 2023, doi:https://doi.org/10.26153/tsw/50926.
LibreCat | DOI | Download (ext.)
 
[141]
2023 | Journal Article | LibreCat-ID: 36983 | OA
Josch, Sebastian, et al. “Experimental and Simulative Determination and Correction of the Effective Gap Extension in Structured Coaxial Measuring Systems.” Rheologica Acta, Springer Science and Business Media LLC, 2023, doi:10.1007/s00397-023-01383-2.
LibreCat | DOI | Download (ext.)
 
[140]
2023 | Conference Abstract | LibreCat-ID: 43236
Rüther, Torben, and Hans-Joachim Schmid. CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip Zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag). 2023.
LibreCat | Files available
 
[139]
2023 | Journal Article | LibreCat-ID: 43034 | OA
Josch, Sebastian, et al. “Development of an Adaptive Coaxial Concrete Rheometer and Rheological Characterisation of Fresh Concrete.” Applied Rheology, vol. 33, no. 1, Walter de Gruyter GmbH, 2023, doi:10.1515/arh-2022-0140.
LibreCat | DOI | Download (ext.)
 
[138]
2023 | Journal Article | LibreCat-ID: 43128
Rüther, Moritz Johannes, et al. “Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.” Powder Technology, vol. 422, 118460, Elsevier BV, 2023, doi:10.1016/j.powtec.2023.118460.
LibreCat | DOI
 
[137]
2023 | Conference Abstract | LibreCat-ID: 44244
Ponusamy, SathishKumar, and Hans-Joachim Schmid. Dynamisch-Mechanische Polymerpartikelverrundung Zur Verbesserung Der Fließfähigkeit Für Das Selektive Lasersintern. 2023.
LibreCat | Files available
 
[136]
2023 | Conference Abstract | LibreCat-ID: 44103
Neukötter, Moritz, et al. Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation). 2023.
LibreCat
 
[135]
2023 | Journal Article | LibreCat-ID: 46815 | OA
Kletetzka, Ivo, et al. “Influence of the Filler–Matrix Adhesion and the Effects of Conditioning on Tensile Properties of Laser-Sintered Parts Built with Polyamide–Glass Bead Dry Blends.” Progress in Additive Manufacturing, Springer Science and Business Media LLC, 2023, doi:10.1007/s40964-023-00501-z.
LibreCat | DOI | Download (ext.)
 
[134]
2023 | Journal Article | LibreCat-ID: 43046 | OA
Klippstein, Sven Helge, et al. “Influence of a Prolonged Shelf Time on PA12 Laser Sintering Powder and Resulting Part Properties.” The International Journal of Advanced Manufacturing Technology , Springer, 2023, doi:https://doi.org/10.1007/s00170-023-11243-1.
LibreCat | DOI | Download (ext.)
 
[133]
2023 | Book Chapter | LibreCat-ID: 46870
Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:10.14361/9783839463772-007.
LibreCat | DOI
 
[132]
2023 | Conference Abstract | LibreCat-ID: 44102
Neukötter, Moritz, et al. Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster). 2023.
LibreCat
 
[131]
2023 | Journal Article | LibreCat-ID: 54632 | OA
Bentrup, Leon Alexander, et al. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.” die hochschullehre, no. 9, wbv Publikation, 2023, doi:10.3278/HSL2310W.
LibreCat | DOI | Download (ext.)
 
[130]
2023 | Conference Abstract | LibreCat-ID: 51147
Massopo, Orlando, et al. Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis (Presentation). 2023.
LibreCat
 
[129]
2022 | Conference Paper | LibreCat-ID: 30220 | OA
Kletetzka, Ivo, et al. “Effects of Spherical Fillers on the Processability and Mechanical Properties of PA613 and PP-Based LS Dry Blends.” Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:http://dx.doi.org/10.26153/tsw/44558.
LibreCat | DOI | Download (ext.)
 
[128]
2022 | Conference Paper | LibreCat-ID: 32874 | OA
Kletetzka, Ivo, et al. “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder.” Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, vol. 33, Laboratory for Freeform Fabrication and University of Texas, 2022, doi:http://dx.doi.org/10.26153/tsw/44555.
LibreCat | DOI | Download (ext.)
 
[127]
2022 | Journal Article | LibreCat-ID: 31035 | OA
Neukötter, Moritz, et al. “Model Droplet Formation in Extensional Filament Stretching within a Filament Extension Atomizer.” Rheologica Acta, Springer Science and Business Media LLC, 2022, doi:10.1007/s00397-022-01339-y.
LibreCat | DOI | Download (ext.)
 
[126]
2022 | Conference Abstract | LibreCat-ID: 37424
Beimdiek, Janis, and Hans-Joachim Schmid. A Combined Flue Gas Cleaning System with a Novel Entrained Flow SCR Using an Online Synthesized Catalyst (Poster). 2022.
LibreCat | Files available
 
[125]
2022 | Journal Article | LibreCat-ID: 35729
Rüther, Moritz Johannes, et al. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2.” Werkstoffe, vol. 6, HW-Verlag, 2022, pp. 18–19.
LibreCat | Download (ext.)
 
[124]
2022 | Journal Article | LibreCat-ID: 35724
Rüther, Moritz Johannes, et al. “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1.” Werkstoffe, vol. 5, HW-Verlag, 2022, pp. 28–29.
LibreCat | Download (ext.)
 
[123]
2022 | Conference Paper | LibreCat-ID: 37436
Beimdiek, Janis, et al. “Combined Filtration Process for Biomass Combustion Plants to Comply with Legal Requirements (Presentation).” 13th World Filtration Congress Proceedings, 2022.
LibreCat | Files available
 
[122]
2022 | Conference Abstract | LibreCat-ID: 37426
Beimdiek, Janis, and Hans-Joachim Schmid. “A Combined Flue Gas Cleaning System with a Novel Entrained Flow SCR Using Online Synthesized Catalyst Particles (Poster).” IAC 2022 Book of Abstacts, 2022.
LibreCat | Files available
 
[121]
2022 | Conference Abstract | LibreCat-ID: 37432
Beimdiek, Janis, and Hans-Joachim Schmid. Novel Entrained Flow SCR Using Online Synthesized Catalyst Particles (Poster). 2022.
LibreCat | Files available
 
[120]
2022 | Conference Abstract | LibreCat-ID: 37430
Beimdiek, Janis, and Hans-Joachim Schmid. Novel Entrained Flow SCR Using Online Synthesized Catalyst Particles in Flue Gas Cleaning Systems (Presentation). 2022.
LibreCat
 
[119]
2022 | Conference Abstract | LibreCat-ID: 41160
Neukötter, Moritz, et al. Triggering Instabilities of Polymer Solution Suspensions under Uniaxial Extension  (Presentation). 2022.
LibreCat | Files available
 
[118]
2022 | Conference Abstract | LibreCat-ID: 41158
Neukötter, Moritz, et al. Instability Analysis of Suspensions with a Polymer Solution Matrix (Presentation). 2022.
LibreCat | Files available
 
[117]
2022 | Conference Abstract | LibreCat-ID: 33695
Rüther, Moritz Johannes, et al. Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing. Edited by Moritz Johannes Rüther et al., 2022.
LibreCat
 
[116]
2022 | Conference Abstract | LibreCat-ID: 43238
Rüther, Torben, et al. A Novel Correction Method for the Shear Rate in a Couette Rheometer (Vortrag). 2022.
LibreCat | Files available
 
[115]
2022 | Conference Abstract | LibreCat-ID: 43243
Rüther, Torben, and Hans-Joachim Schmid. Multidimensional Particle Characterization: Centrifugal Differential Mobility Analyzer (Poster). 2022.
LibreCat | Files available
 
[114]
2022 | Conference Abstract | LibreCat-ID: 43240
Rüther, Torben, et al. NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag). 2022.
LibreCat | Files available
 
[113]
2022 | Journal Article | LibreCat-ID: 30228
Klippstein, Sven Helge, et al. “Powder Spread Process Monitoring in Polymer Laser Sintering and Its Influences on Part Properties.” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, Springer, 2022, pp. 1149–1157, doi:https://doi.org/10.1007/s11837-021-05042-w .
LibreCat | DOI
 
[112]
2022 | Conference Paper | LibreCat-ID: 33356 | OA
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Powder Spread Flaws in Polymer Laser Sintering and Its Influences on Mechanical Performance.” Proceedings of the 33nd Annual International Solid Freeform Fabrication Symposium, 2022.
LibreCat | Download (ext.)
 
[111]
2022 | Journal Article | LibreCat-ID: 44468
Schmidt, Stephan, et al. “A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges.” SIAM Journal on Scientific Computing, vol. 44, no. 4, Society for Industrial & Applied Mathematics (SIAM), 2022, pp. B1175–94, doi:10.1137/20m1389054.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 44469
Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering with PA12 and PA6 on a Standard System.” Macromolecular Symposia, vol. 404, no. 1, 2100397, Wiley, 2022, doi:10.1002/masy.202100397.
LibreCat | DOI
 
[109]
2021 | Journal Article | LibreCat-ID: 25142
Kummert, Christina, et al. “Mechanical Characterization and Numerical Modeling of Laser-Sintered TPE Lattice Structures.” Journal of Materials Research, 2021, doi:10.1557/s43578-021-00321-3.
LibreCat | DOI
 
[108]
2021 | Conference Paper | LibreCat-ID: 23760 | OA
Menge, Dennis, and Hans-Joachim Schmid. Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12. 2021.
LibreCat | Download (ext.)
 
[107]
2021 | Conference Abstract | LibreCat-ID: 30364
Tischendorf, Ricardo, et al. Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen. 2021.
LibreCat
 
[106]
2021 | Misc | LibreCat-ID: 24202
Pawelczyk, Sebastian, et al. Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention. 2021.
LibreCat | Files available
 
[105]
2021 | Conference Abstract | LibreCat-ID: 30225
Rüther, Moritz Johannes, et al. Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester. 2021.
LibreCat
 
[104]
2021 | Conference Paper | LibreCat-ID: 24160 | OA
Kletetzka, Ivo, et al. “Laser Sintering Design Guidelines for Media Transmitting Components.” Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, vol. 32, Laboratory for Freeform Fabrication and University of Texas, 2021, doi:http://dx.doi.org/10.26153/tsw/17548.
LibreCat | DOI | Download (ext.)
 
[103]
2021 | Journal Article | LibreCat-ID: 26095
Schumacher, Stefan, et al. “Effektivität von Luftreinigern Zur Reduzierung Des COVID-19-Infektionsrisikos/ Efficacy of Air Purifiers in Reducing the Risk of COVID-19 Infections.” Gefahrstoffe, 2021, pp. 16–28, doi:10.37544/0949-8036-2021-01-02-18.
LibreCat | DOI
 
[102]
2021 | Conference Abstract | LibreCat-ID: 27551
Ludwig, Janis, et al. “Assessing Spreading and Removal of Virus Laden Aerosols in Different Settings Using an Aerosol Method (Presentation).” Book of Abstracts for the 2021 European Aerosol Conference, edited by The Aerosol Society, 2021.
LibreCat | Files available
 
[101]
2021 | Conference Abstract | LibreCat-ID: 27553
Ludwig, Janis, and Hans-Joachim Schmid. Synthese und asymmetrische Funktionalisierung von submikronen Janus-Polymer-Partikeln in der Gasphase (Poster). 2021.
LibreCat
 
[100]
2021 | Conference Abstract | LibreCat-ID: 24475
Neukötter, Moritz, et al. Theoretische Beschreibung Des Tropfenbildungsprozesses Bei Der Filament Extension Atomization: Entwicklung Eines Vorhersagemodells Für Die Tropfengröße (Poster). 2021.
LibreCat | Files available
 
[99]
2021 | Conference Abstract | LibreCat-ID: 30221
Neukötter, Moritz, et al. Filament Extension Atomization – A Novel Process for Powder Production? (Presentation). 2021.
LibreCat | Files available
 
[98]
2020 | Report | LibreCat-ID: 24943
Menge, Dennis, et al. Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat | Download (ext.)
 
[97]
2020 | Journal Article | LibreCat-ID: 24241
Rasche, David B., et al. “An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output.” Review of Scientific Instruments, vol. 91, AIP Publishing, 2020, p. 055104, doi:10.1063/1.5133438.
LibreCat | DOI
 
[96]
2020 | Conference Paper | LibreCat-ID: 22182
Kummert, Christina, et al. “Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2020, pp. 735–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2019/063%20Influence%20of%20Part%20Microstructure%20on%20Mechanical%20Pro.pdf.
LibreCat | DOI
 
[95]
2020 | Conference Abstract | LibreCat-ID: 25062
Tischendorf, Ricardo, et al. Influence of Differing Nozzle Configurations on the Final Particle Characteristics and Particle Structure Evolution in Spray Flames. 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, 2020.
LibreCat | Files available
 
[94]
2020 | Journal Article | LibreCat-ID: 21949 | OA
Haist, Michael, et al. “Interlaboratory Study on Rheological Properties of Cement Pastes and Reference Substances: Comparability of Measurements Performed with Different Rheometers and Measurement Geometries.” Materials and Structures, 2020, doi:10.1617/s11527-020-01477-w.
LibreCat | DOI | Download (ext.)
 
[93]
2020 | Journal Article | LibreCat-ID: 21948 | OA
Pawelczyk, Sebastian, et al. “Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures.” Materials, 467, 2020, doi:10.3390/ma13020467.
LibreCat | DOI | Download (ext.)
 
[92]
2019 | Report | LibreCat-ID: 24628
Menge, Dennis, et al. FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen. 2019.
LibreCat
 
[91]
2019 | Book Chapter | LibreCat-ID: 26098
Schmid, Hans-Joachim, et al. “Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges.” Particles in Contact, 2019, doi:10.1007/978-3-030-15899-6_2.
LibreCat | DOI
 
[90]
2019 | Conference Paper | LibreCat-ID: 22198
Klippstein, Sven Helge, and Hans-Joachim Schmid. “Methodik Zur Qualifizierung Des Lasersinter Prozesses Für Die Serienfertigung.” Proceedings of the 16th Rapid.Tech Conference, 2019, doi:10.3139/9783446462441.025.
LibreCat | DOI
 
[89]
2019 | Conference Abstract | LibreCat-ID: 24515
Tischendorf, Ricardo, et al. Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements. PARTEC 2019 International Congress on Particle Technology, 2019.
LibreCat | Files available
 
[88]
2019 | Conference Paper | LibreCat-ID: 22202
Klippstein, Sven Helge, et al. “Devolopment, Production and Post-Processing of a Topology Optimized Aircraft Bracket .” 30th Annual International Solid Freeform Fabrication Symposium, vol. 30, 2019, pp. 1932–45.
LibreCat | Download (ext.)
 
[87]
2019 | Journal Article | LibreCat-ID: 22541
Giner, Ignacio, et al. “Water Adsorption and Capillary Bridge Formation on Silica Micro-Particle Layers Modified with Perfluorinated Organosilane Monolayers.” Applied Surface Science, 2019, pp. 873–79, doi:10.1016/j.apsusc.2018.12.221.
LibreCat | DOI
 
[86]
2018 | Journal Article | LibreCat-ID: 26103
Abishek, S., et al. “Representative Domain Size for the Simulation of Coalescence Filtration in Nonwoven and Foam Media.” Separation and Purification Technology, 2018, pp. 344–52, doi:10.1016/j.seppur.2018.06.051.
LibreCat | DOI
 
[85]
2018 | Conference Paper | LibreCat-ID: 22183 | OA
Menge, Dennis, et al. “Topology Optimized Heat Transfer Using the Example of an Electronic Housing.” 29th Annual International Solid Freeform Fabrication Symposium, vol. 29, 2018, pp. 687–97.
LibreCat | Download (ext.)
 
[84]
2018 | Journal Article | LibreCat-ID: 22196
Kummert, Christina, et al. “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung.” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, Springer, 2018, pp. 425–30, doi:10.1007/s11837-017-2658-2.
LibreCat | DOI
 
[83]
2018 | Patent | LibreCat-ID: 29824
Schmid, Hans-Joachim, and David Rasche. Bestimmung von Nanopartikeleigenschaften Eines Aerosols. 2018.
LibreCat | Files available
 
[82]
2017 | Book Chapter | LibreCat-ID: 26104
Lohn, Johannes, and Hans-Joachim Schmid. “Aufbau Einer Lasersinter-Versuchsanlage Und Verarbeitung Neuer Materialien Am Beispiel von Polyamid 6 Und Polyamid 613.” Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, 2017, doi:10.3139/9783446454606.023.
LibreCat | DOI
 
[81]
2017 | Journal Article | LibreCat-ID: 26106
Laube, Jens, et al. “Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity.” The Journal of Physical Chemistry C, 2017, pp. 15294–303, doi:10.1021/acs.jpcc.7b05655.
LibreCat | DOI
 
[80]
2017 | Journal Article | LibreCat-ID: 26107
Dörmann, Michael, and Hans-Joachim Schmid. “Distance-Dependency of Capillary Bridges in Thermodynamic Equilibrium.” Powder Technology, 2017, pp. 175–83, doi:10.1016/j.powtec.2017.01.012.
LibreCat | DOI
 
[79]
2017 | Book Chapter | LibreCat-ID: 23759
Menge, Dennis, et al. “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, edited by Hans Albert Richard et al., Springer Vieweg, 2017, pp. 105–20, doi:10.1007/978-3-658-17780-5.
LibreCat | DOI
 
[78]
2017 | Journal Article | LibreCat-ID: 22195
Josupeit, Stefan, and Hans-Joachim Schmid. “Experimental Analysis and Modeling of Local Ageing Effects during Laser Sintering of Polyamide 12 in Regard to Individual Thermal Histories.” Journal of Applied Polymer Science, vol. 134, no. 42, Wiley, 2017, doi:10.1002/app.45435.
LibreCat | DOI
 
[77]
2016 | Journal Article | LibreCat-ID: 26109
Josupeit, Stefan, et al. “Modelling of Temperatures and Heat Flow within Laser Sintered Part Cakes.” Additive Manufacturing, 2016, pp. 189–96, doi:10.1016/j.addma.2016.06.002.
LibreCat | DOI
 
[76]
2016 | Journal Article | LibreCat-ID: 26111
Schmid, Hans-Joachim, and S. Pieper. “Guard Ring Induced Distortion of the Steady Velocity Profile in a Parallel Plate Rheometer.” Applied Rheology, 2016, doi:10.3933/APPLRHEOL-26-64533.
LibreCat | DOI
 
[75]
2016 | Journal Article | LibreCat-ID: 26118
Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal Suspensions in a Parallel Plate Rheometer under Steady Shear.” Journal of Non-Newtonian Fluid Mechanics, 2016, pp. 1–7, doi:10.1016/j.jnnfm.2016.04.004.
LibreCat | DOI
 
[74]
2016 | Book | LibreCat-ID: 27443
Gausemeier, Jürgen, et al. Additive Fertigung. acatech - Deutsche Akademie der Technikwissenschaften, 2016.
LibreCat
 
[73]
2016 | Conference Paper | LibreCat-ID: 22180
Josupeit, Stefan, et al. “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures.” 27th Annual International Solid Freeform Fabrication Symposium , vol. 27, 2016, pp. 2077–86, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2016/166-Josupeit.pdf.
LibreCat | DOI
 
[72]
2016 | Journal Article | LibreCat-ID: 22185
Delfs, Patrick, et al. “Optimized Build Orientation of Additive Manufactured Parts for Improved Surface Quality and Build Time.” Additive Manufacturing, vol. 2, no. 12, Part B, Elsevier, 2016, pp. 214–320, doi:10.1016/j.addma.2016.06.003.
LibreCat | DOI
 
[71]
2016 | Conference Paper | LibreCat-ID: 22190
Delfs, Patrick, and Hans-Joachim Schmid. “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts .” Fraunhofer Direct Digital Manufacturing Conference, vol. 3, 2016, pp. 411–14, doi:https://www.bookshop.fraunhofer.de/buch/fraunhofer-direct-digital-manufacturing-conference-ddmc-2016/245111#.
LibreCat | DOI
 
[70]
2016 | Conference Paper | LibreCat-ID: 22194
Josupeit, Stefan, and Hans-Joachim Schmid. “Thermal Properties of Polyamide 12 Powder for Application in Laser Sintering.” International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 
[69]
2016 | Conference Paper | LibreCat-ID: 22200
Josupeit, Stefan, et al. “Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures.” Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–20, doi:10.3139/9783446450608.009.
LibreCat | DOI
 
[68]
2016 | Conference Paper | LibreCat-ID: 22404
Lammers, Stefan, et al. “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine.” EDPC 2016, 2016, doi:10.1109/EDPC.2016.7851312.
LibreCat | DOI
 
[67]
2016 | Conference Paper | LibreCat-ID: 22408
Josupeit, Stefan, et al. “Influences on the Dimensional Accuracy of Laser Sintered Parts along the Process Chain.” 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[66]
2016 | Book (Editor) | LibreCat-ID: 26113
Kniffka, Wieland, et al., editors. Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse Und Maßnahmen / Dimensional Accuracy of Polymer Laser Sintered Parts: Influences and Measures. 2016, doi:10.3139/9783446450608.009.
LibreCat | DOI
 
[65]
2016 | Journal Article | LibreCat-ID: 21947
Jesinghausen, Steffen, et al. “Direct Measurement of Wall Slip and Slip Layer Thickness of Non-Brownian Hard-Sphere Suspensions in Rectangular Channel Flows.” Experiments in Fluids, 2016, doi:10.1007/s00348-016-2241-6.
LibreCat | DOI | Download (ext.)
 
[64]
2016 | Journal Article | LibreCat-ID: 25140
Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal Suspensions in a Parallel Plate Rheometer under Steady Shear.” Journal of Non-Newtonian Fluid Mechanics, 2016, pp. 1–7, doi:10.1016/j.jnnfm.2016.04.004.
LibreCat | DOI
 
[63]
2015 | Journal Article | LibreCat-ID: 26108
Schiller, Sascha, et al. “Evaluation of the Efficiency of Filtration Processes Using Precoat Materials.” Chemical Engineering & Technology, 2015, pp. 491–98, doi:10.1002/ceat.201500385.
LibreCat | DOI
 
[62]
2015 | Book Chapter | LibreCat-ID: 26119
Erler, Jacqueline V., et al. “Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols.” Colloid Process Engineering, 2015, doi:10.1007/978-3-319-15129-8_16.
LibreCat | DOI
 
[61]
2015 | Journal Article | LibreCat-ID: 26121
Tigges, L., et al. “Bipolar Charge Distribution of a Soft X-Ray Diffusion Charger.” Journal of Aerosol Science, 2015, pp. 77–86, doi:10.1016/j.jaerosci.2015.07.002.
LibreCat | DOI
 
[60]
2015 | Journal Article | LibreCat-ID: 26122
Tigges, L., et al. “On the Bipolar Charge Distribution Used for Mobility Particle Sizing: Theoretical Considerations.” Journal of Aerosol Science, 2015, pp. 119–34, doi:10.1016/j.jaerosci.2015.05.010.
LibreCat | DOI
 
[59]
2015 | Journal Article | LibreCat-ID: 26123
Schiller, Sascha, and Hans-Joachim Schmid. “Highly Efficient Filtration of Ultrafine Dust in Baghouse Filters Using Precoat Materials.” Powder Technology, 2015, pp. 96–105, doi:10.1016/j.powtec.2015.03.048.
LibreCat | DOI
 
[58]
2015 | Journal Article | LibreCat-ID: 26124
Dörmann, Michael, and Hans-Joachim Schmid. “Simulation of Capillary Bridges between Particles.” Procedia Engineering, 2015, pp. 14–23, doi:10.1016/j.proeng.2015.01.102.
LibreCat | DOI
 
[57]
2015 | Conference Paper | LibreCat-ID: 22178
Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
LibreCat | DOI
 
[56]
2015 | Conference Paper | LibreCat-ID: 22179
Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser Sintered Part Cakes and Its Influence on Process Quality.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
LibreCat | DOI
 
[55]
2015 | Conference Paper | LibreCat-ID: 22187
Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
LibreCat | DOI
 
[54]
2015 | Conference Paper | LibreCat-ID: 22189
Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for Additive Manufacturing Processes.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
LibreCat | DOI
 
[53]
2015 | Conference Paper | LibreCat-ID: 22199
Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh Rates.” Proceedings of the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.
LibreCat | DOI
 
[52]
2015 | Conference Paper | LibreCat-ID: 23074
Koke, Isabel, et al. “Tutorenprogramm Und Vertiefungsberatung Stellen Weichen in Entscheidenden Phasen Des Student Life-Cycles in Maschinenbaustudiengängen.” 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015.
LibreCat
 
[51]
2014 | Journal Article | LibreCat-ID: 26125
Pieper, Sven, et al. “Absence of Pressure Sensitivity of Apparent Wall Slip in Pressure-Driven Flow of Non-Colloidal Suspensions.” Rheologica Acta, 2014, pp. 69–75, doi:10.1007/s00397-014-0815-x.
LibreCat | DOI
 
[50]
2014 | Journal Article | LibreCat-ID: 26126
Schiller, Sascha, and Hans-Joachim Schmid. “Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media.” Chemical Engineering & Technology, 2014, pp. 1009–20, doi:10.1002/ceat.201300856.
LibreCat | DOI
 
[49]
2014 | Journal Article | LibreCat-ID: 26127
Dörmann, Michael, and Hans-Joachim Schmid. “Simulation of Capillary Bridges between Nanoscale Particles.” Langmuir, 2014, pp. 1055–62, doi:10.1021/la404409k.
LibreCat | DOI
 
[48]
2014 | Conference Paper | LibreCat-ID: 22176
Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat | DOI
 
[47]
2014 | Conference Paper | LibreCat-ID: 22177
Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature Measurement of Laser Sintered Part Cakes.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
LibreCat | DOI
 
[46]
2014 | Conference Paper | LibreCat-ID: 22184
Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence on Part Quality Characteristics.” 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no. 3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
LibreCat | DOI
 
[45]
2014 | Journal Article | LibreCat-ID: 22186
Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer Laser Sintering Process .” Advances in Mechanical Engineering, vol. 6, SAGE Publications, 2014, pp. 1687–8140, doi:10.1155/2014/185374.
LibreCat | DOI
 
[44]
2014 | Conference Paper | LibreCat-ID: 22193
Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser Sintering Cooling Process.” International Conference on Additive Technologies, vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
LibreCat | DOI
 
[43]
2014 | Conference Paper | LibreCat-ID: 22203
Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
LibreCat | DOI
 
[42]
2013 | Journal Article | LibreCat-ID: 26129
Erler, Jacqueline, et al. “Liquid–Liquid Phase Transfer of Magnetite Nanoparticles — Evaluation of Surfactants.” Powder Technology, vol. 247, 2013, pp. 265–69, doi:10.1016/j.powtec.2012.09.047.
LibreCat | DOI
 
[41]
2013 | Journal Article | LibreCat-ID: 26130
Schiller, Sascha, and Hans-Joachim Schmid. “Hocheffiziente Feinstaubabscheidung Aus Kleinfeuerungsanlagen Mit Einem Schlauchfilter.” Chemie Ingenieur Technik, 2013, pp. 1324–28, doi:10.1002/cite.201200114.
LibreCat | DOI
 
[40]
2013 | Conference Paper | LibreCat-ID: 22175
Josupeit, Stefan, et al. “A Material-Based Quality Concept for Polymer Laser Sintering.” 24th Annual International Solid Freeform Fabrication Symposium , vol. 24, 2013, pp. 44–54, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-03-Josupeit.pdf.
LibreCat | DOI
 
[39]
2013 | Conference Paper | LibreCat-ID: 22192
Rüsenberg, Stefan, and Hans-Joachim Schmid. “Advanced Characterization Method of Nylon 12 Materials for Application in Laser Sinter Processing.” International Conference of the Polymer-Processing-Society (PPS), vol. 29, 2013, doi:10.1063/1.4873877.
LibreCat | DOI
 
[38]
2013 | Conference Paper | LibreCat-ID: 22197
Josupeit, Stefan, et al. “Mechanische Und Rheologische Untersuchungen Neuer Laser Sinter Materialien.” Merseburger Rapid Prototyping Forum, vol. 7, 2013, doi:https://www.rp-netzwerk.de/images/stories/pdf/rapid_7/Universitaet_Paderborn_DMRC_RP-Forum2013.pdf.
LibreCat | DOI
 
[37]
2013 | Conference Paper | LibreCat-ID: 22201
Rüsenberg, Stefan, et al. “Additiv versus Konventionell: Benchmarking Am Beispiel Eines Designs Aus Der Luftfahrtindustrie.” RapidTech, 2013.
LibreCat
 
[36]
2012 | Journal Article | LibreCat-ID: 26132
Kirchhoff, Nadine, et al. “Wood-Plastic-Composites: Rheologische Charakterisierung Und Füllverhalten Im Spritzgießprozess.” Chemie Ingenieur Technik, 2012, pp. 1584–89, doi:10.1002/cite.201100223.
LibreCat | DOI
 
[35]
2012 | Journal Article | LibreCat-ID: 26133
Kirchhof, M. J., et al. “Sintering Kinetics and Mechanism of Vitreous Nanoparticles.” Journal of Aerosol Science, vol. 45, 2012, pp. 26–39, doi:10.1016/j.jaerosci.2011.10.006.
LibreCat | DOI
 
[34]
2012 | Conference Paper | LibreCat-ID: 22174
Rüsenberg, Stefan, et al. “Controlling the Quality of Laser Sintered Parts Along the Process Chain.” 23rd Annual International Solid Freeform Fabrication Symposium, vol. 23, 2012, pp. 1024–44, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-78-Ruesenberg.pdf.
LibreCat | DOI
 
[33]
2012 | Conference Paper | LibreCat-ID: 22204
Rüsenberg, Stefan, and Hans-Joachim Schmid. “Mechanical Properties as a Result of Multitude of Parameters.” The European Forum on Additive Manufacturing, vol. 17, 2012, doi:https://afpr.asso.fr/content/assises/2012/actes/papiers/s5_2.pdf.
LibreCat | DOI
 
[32]
2011 | Conference Paper | LibreCat-ID: 22188
Rüsenberg, Stefan, et al. “Mechanical and Physical Properties - A Way to Asses Quality of Laser Sintered Parts.” 22th Annual International Solid Freeform Fabrication Symposium, vol. 22, 2011, pp. 239–51, doi:http://utw10945.utweb.utexas.edu/Manuscripts/2011/2011-19-Ruesenberg.pdf.
LibreCat | DOI
 
[31]
2011 | Book | LibreCat-ID: 22191
Rüsenberg, Stefan, et al. Porosity as a Key to Increase Material Properties of Laser Sintered Parts. 2011, pp. 531–38, doi:10.1201/b11341.
LibreCat | DOI
 
[30]
2010 | Journal Article | LibreCat-ID: 26134
Körmer, R., et al. “Aerosol Synthesis of Silicon Nanoparticles with Narrow Size Distribution—Part 2: Theoretical Analysis of the Formation Mechanism.” Journal of Aerosol Science, vol. 41, no. 11, 2010, pp. 1008–19, doi:10.1016/j.jaerosci.2010.08.002.
LibreCat | DOI
 
[29]
2010 | Journal Article | LibreCat-ID: 26135
Körmer, R., et al. “Aerosol Synthesis of Silicon Nanoparticles with Narrow Size Distribution—Part 1: Experimental Investigations.” Journal of Aerosol Science, vol. 41, no. 11, 2010, pp. 998–1007, doi:10.1016/j.jaerosci.2010.05.007.
LibreCat | DOI
 
[28]
2010 | Journal Article | LibreCat-ID: 26136
Seipenbusch, M., et al. “Interparticle Forces in Silica Nanoparticle Agglomerates.” Journal of Nanoparticle Research, vol. 12, no. 6, 2010, pp. 2037–44, doi:10.1007/s11051-009-9760-5.
LibreCat | DOI
 
[27]
2010 | Book Review | LibreCat-ID: 58272
Woppowa, Jan, and Hans-Joachim Schmid. “Gastfreundschaft. Ein Modell für den konfessionellen Religionsunterricht der Zukunft.” rhs, vol. 54, no. 2011, 2010, pp. 139–40.
LibreCat
 
[26]
2009 | Journal Article | LibreCat-ID: 26137
Vassilev, Vassil, et al. “Interfacial Energy Estimation in a Precipitation Reaction Using the Flatness Based Control of the Moment Trajectories.” Chemical Engineering Science, vol. 65, no. 6, 2009, pp. 2183–89, doi:10.1016/j.ces.2009.12.014.
LibreCat | DOI
 
[25]
2009 | Journal Article | LibreCat-ID: 26138
Al Zaitone, Belal, et al. “Simulation of Structure and Mobility of Aggregates Formed by Simultaneous Coagulation, Sintering and Surface Growth.” Journal of Aerosol Science, vol. 40, no. 11, 2009, pp. 950–64, doi:10.1016/j.jaerosci.2009.08.007.
LibreCat | DOI
 
[24]
2009 | Journal Article | LibreCat-ID: 26139
Machunsky, Stefanie, et al. “Liquid–Liquid Phase Transfer of Magnetite Nanoparticles.” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 348, no. 1–3, 2009, pp. 186–90, doi:10.1016/j.colsurfa.2009.07.014.
LibreCat | DOI
 
[23]
2009 | Journal Article | LibreCat-ID: 26140
Kirchhof, M. J., et al. “Three-Dimensional Simulation of Viscous-Flow Agglomerate Sintering.” Physical Review E, vol. 80, no. 2, 2009, p. 026319, doi:10.1103/physreve.80.026319.
LibreCat | DOI
 
[22]
2008 | Journal Article | LibreCat-ID: 26142
Horn, M., and Hans-Joachim Schmid. “A Comprehensive Approach in Modeling Lagrangian Particle Deposition in Turbulent Boundary Layers.” Powder Technology, vol. 186, no. 3, 2008, pp. 189–98, doi:10.1016/j.powtec.2007.11.048.
LibreCat | DOI
 
[21]
2007 | Journal Article | LibreCat-ID: 26147
Schneider, L., et al. “Influence of Particle Size and Concentration on the Second-Harmonic Signal Generated at Colloidal Surfaces.” Applied Physics B, vol. 87, 2007, pp. 333–39, doi:10.1007/s00340-007-2597-7.
LibreCat | DOI
 
[20]
2007 | Journal Article | LibreCat-ID: 29827
Schmid, Hans-Joachim. “Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter.” Gefahrstoffe, Reinhaltung der Luft. Air Quality Control, vol. 67, no. 4, 2007.
LibreCat
 
[19]
2006 | Journal Article | LibreCat-ID: 26145
Binder, Christian, et al. “Simulation of the Hydrodynamic Drag of Aggregated Particles.” Journal of Colloid and Interface Science, vol. 301, no. 1, 2006, pp. 155–67, doi:10.1016/j.jcis.2006.04.045.
LibreCat | DOI
 
[18]
2006 | Journal Article | LibreCat-ID: 26148
Horn, M., and Hans-Joachim Schmid. “Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen.” Chemie Ingenieur Technik, vol. 78, no. 6, 2006, pp. 694–99, doi:10.1002/cite.200500110.
LibreCat | DOI
 
[17]
2006 | Journal Article | LibreCat-ID: 26150
Artelt, C., et al. “Modelling Titania Formation at Typical Industrial Process Conditions: Effect of Surface Shielding and Surface Energy on Relevant Growth Mechanisms.” Chemical Engineering Science, vol. 61, no. 1, 2006, pp. 18–32, doi:10.1016/j.ces.2004.12.053.
LibreCat | DOI
 
[16]
2005 | Journal Article | LibreCat-ID: 26149
Schwarzer, Hans-Christoph, et al. “Predictive Simulation of Nanoparticle Precipitation Based on the Population Balance Equation.” Chemical Engineering Science, vol. 61, no. 1, 2005, pp. 167–81, doi:10.1016/j.ces.2004.11.064.
LibreCat | DOI
 
[15]
2005 | Journal Article | LibreCat-ID: 26151
Schmid, Hans-Joachim, et al. “Evolution of the Fractal Dimension for Simultaneous Coagulation and Sintering.” Chemical Engineering Science, vol. 61, no. 1, 2005, pp. 293–305, doi:10.1016/j.ces.2004.11.068.
LibreCat | DOI
 
[14]
2005 | Journal Article | LibreCat-ID: 26153
Artelt, C., et al. “On the Impact of Accessible Surface and Surface Energy on Particle Formation and Growth from the Vapour Phase.” Journal of Aerosol Science, vol. 36, no. 2, 2005, pp. 147–72, doi:10.1016/j.jaerosci.2004.08.003.
LibreCat | DOI
 
[13]
2004 | Journal Article | LibreCat-ID: 26152
Schmid, Hans-Joachim, et al. “Monte Carlo Simulation of Aggregate Morphology for Simultaneous Coagulation and Sintering.” Journal of Nanoparticle Research, vol. 6, no. 6, 2004, pp. 613–26, doi:10.1007/s11051-004-2161-x.
LibreCat | DOI
 
[12]
2004 | Journal Article | LibreCat-ID: 26154
Kirchhof, Martin J., et al. “Reactor System for the Study of High-Temperature Short-Time Sintering of Nanoparticles.” Review of Scientific Instruments, vol. 75, no. 11, 2004, pp. 4833–40, doi:10.1063/1.1809258.
LibreCat | DOI
 
[11]
2004 | Journal Article | LibreCat-ID: 26155
Messerer, A., et al. “Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen.” Chemie Ingenieur Technik, vol. 76, no. 8, 2004, pp. 1092–96, doi:10.1002/cite.200403418.
LibreCat | DOI
 
[10]
2003 | Journal Article | LibreCat-ID: 26156
Schmid, Hans-Joachim, and Lutz Vogel. “On the Modelling of the Particle Dynamics in Electro-Hydrodynamic Flow-Fields: I. Comparison of Eulerian and Lagrangian Modelling Approach.” Powder Technology, vol. 135/136, 2003, pp. 118–35, doi:10.1016/j.powtec.2003.08.009.
LibreCat | DOI
 
[9]
2003 | Journal Article | LibreCat-ID: 26157
Schmid, Hans-Joachim. “On the Modelling of the Particle Dynamics in Electro-Hydrodynamic Flow Fields: II. Influences of Inhomogeneities on Electrostatic Precipitation.” Powder Technology, vol. 135/136, 2003, pp. 136–49, doi:10.1016/j.powtec.2003.08.010.
LibreCat | DOI
 
[8]
2003 | Journal Article | LibreCat-ID: 26158
Peukert, W., and Hans-Joachim Schmid. “Herausforderungen Für Die Lehre Am Beispiel Der Mechanischen Verfahrenstechnik.” Chemie Ingenieur Technik, vol. 75, no. 3, 2003, pp. 177–83, doi:10.1002/cite.200390035.
LibreCat | DOI
 
[7]
2003 | Journal Article | LibreCat-ID: 26159
Artelt, C., et al. “On the Relevance of Accounting for the Evolution of the Fractal Dimension in Aerosol Process Simulations.” Journal of Aerosol Science, vol. 34, no. 5, 2003, pp. 511–34, doi:10.1016/s0021-8502(03)00005-3.
LibreCat | DOI
 
[6]
2002 | Journal Article | LibreCat-ID: 26160
Schiel, Annette, et al. “In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures.” Particle & Particle Systems Characterization, vol. 19, no. 6, 2002, pp. 410–18, doi:10.1002/ppsc.200290004.
LibreCat | DOI
 
[5]
2002 | Journal Article | LibreCat-ID: 26161
Schmid, Hans-Joachim, et al. “In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow.” Particle & Particle Systems Characterization, vol. 19, no. 3, 203, 2002, doi:10.1002/1521-4117(200207)19:3<203::aid-ppsc203>3.0.co;2-7.
LibreCat | DOI
 
[4]
2002 | Book Chapter | LibreCat-ID: 26169
Schmid, Hans-Joachim. “Trennprozesse: Abschnitt 7.5.3.” Handbuch Der Mechanischen Verfahrenstechnik, 2002, doi:10.1002/3527603352.ch7r.
LibreCat | DOI
 
[3]
2002 | Journal Article | LibreCat-ID: 29826
Schmid, Hans-Joachim, and Wolfgang Peukert. “Novel Concepts for Teaching Particle Technology .” Chemical Engineering Education, vol. 36, no. 4, 2002.
LibreCat | Download (ext.)
 
[2]
2002 | Journal Article | LibreCat-ID: 29484
Schmid, Hans-Joachim. “On the Modelling of the Electro-Hydrodynamic Flow Field in Electrostatic Precipitators.” Flow, Turbulence and Combustion, vol. 68, Springer, 2002, pp. 63–89, doi:10.1023/A:1015666116174.
LibreCat | DOI
 
[1]
1998 | Dissertation | LibreCat-ID: 29825
Schmid, Hans-Joachim. Zum Partikeltransport in Elektrischen Abscheidern. Shaker Verlag, 1998.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed