Hans-Joachim Schmid

hans-joachim.schmid@uni-paderborn.de
ID
464

154 Publications

Mark all

[154]
2024 | Special Issue | LibreCat-ID: 51133
R. Tischendorf et al., Eds., Maghemite nanoparticles synthesis via spray flame synthesis and particle characterization by hole in a tube sampling and scanning mobility particle sizing (HIAT-SMPS). Elsevier, 2024.
LibreCat | DOI | Download (ext.)
 
[153]
2024 | Journal Article | LibreCat-ID: 52357 | OA
J. Beimdiek and H.-J. Schmid, “Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols,” Atmosphere, vol. 15, no. 3, Art. no. 305, 2024, doi: 10.3390/atmos15030305.
LibreCat | DOI | Download (ext.)
 
[152]
2024 | Conference Abstract | LibreCat-ID: 56958
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particle-induced Instabilities in Uniaxially Elongated Thermoplastic Polymer Blends ,” 2024.
LibreCat
 
[151]
2024 | Mastersthesis | LibreCat-ID: 51149
J. Reimer, O. Massopo, and H.-J. Schmid, Entwicklung einer Datenbank hergestellter Nanomaterialien mittels Gasphasensynthese (Studienarbeit). .
LibreCat
 
[150]
2023 | Conference Abstract | LibreCat-ID: 47626
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in PARTEC International Congress on Particle Technology - Book of Abstracts, Nürnberg, 2023, pp. 172–176.
LibreCat
 
[149]
2023 | Conference Paper | LibreCat-ID: 46764 | OA
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, vol. 34.
LibreCat | Download (ext.)
 
[148]
2023 | Special Issue | LibreCat-ID: 51136
F. Fröde et al., Eds., Large eddy simulation of iron oxide formation in a laboratory spray flame. Elsevier, 2023.
LibreCat | DOI | Download (ext.)
 
[147]
2023 | Conference Abstract | LibreCat-ID: 51145
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, and T. Kasper, “Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster),” presented at the European Aerosol Conference, Málaga, Spain , 2023.
LibreCat
 
[146]
2023 | Conference Abstract | LibreCat-ID: 51142
O. Massopo et al., “Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag),” presented at the Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.
LibreCat
 
[145]
2023 | Conference Abstract | LibreCat-ID: 51726
J. Beimdiek, S. Schiller, and H.-J. Schmid, “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster),” presented at the Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn, 2023.
LibreCat | Files available
 
[144]
2023 | Conference Paper | LibreCat-ID: 51727
J. Beimdiek, S. Schiller, and H.-J. Schmid, “Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system,” presented at the International Congress on Particle Technology | PARTEC 2023, Nürnberg, 2023.
LibreCat | Files available
 
[143]
2023 | Conference Paper | LibreCat-ID: 51218 | OA
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50931.
LibreCat | DOI | Download (ext.)
 
[142]
2023 | Conference Paper | LibreCat-ID: 46862 | OA
F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50926.
LibreCat | DOI | Download (ext.)
 
[141]
2023 | Journal Article | LibreCat-ID: 36983 | OA
S. Josch, S. Jesinghausen, C. Dechert, and H.-J. Schmid, “Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems,” Rheologica Acta, 2023, doi: 10.1007/s00397-023-01383-2.
LibreCat | DOI | Download (ext.)
 
[140]
2023 | Conference Abstract | LibreCat-ID: 43236
T. Rüther and H.-J. Schmid, “CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag),” presented at the DECHEMA Jahrestreffen PMT 2023, Paderborn, 2023.
LibreCat | Files available
 
[139]
2023 | Journal Article | LibreCat-ID: 43034 | OA
S. Josch, S. Jesinghausen, and H.-J. Schmid, “Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete,” Applied Rheology, vol. 33, no. 1, 2023, doi: 10.1515/arh-2022-0140.
LibreCat | DOI | Download (ext.)
 
[138]
2023 | Journal Article | LibreCat-ID: 43128
M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Powder Technology, vol. 422, Art. no. 118460, 2023, doi: 10.1016/j.powtec.2023.118460.
LibreCat | DOI
 
[137]
2023 | Conference Abstract | LibreCat-ID: 44244
S. Ponusamy and H.-J. Schmid, “Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern,” presented at the Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik, Braunschweig, 2023.
LibreCat | Files available
 
[136]
2023 | Conference Abstract | LibreCat-ID: 44103
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation),” presented at the Annual Meeting of the German Rheological Society (DRG) , Berlin, 2023.
LibreCat
 
[135]
2023 | Journal Article | LibreCat-ID: 46815 | OA
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,” Progress in Additive Manufacturing, 2023, doi: 10.1007/s40964-023-00501-z.
LibreCat | DOI | Download (ext.)
 
[134]
2023 | Journal Article | LibreCat-ID: 43046 | OA
S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” The International Journal of Advanced Manufacturing Technology , 2023, doi: https://doi.org/10.1007/s00170-023-11243-1.
LibreCat | DOI | Download (ext.)
 
[133]
2023 | Book Chapter | LibreCat-ID: 46870
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.
LibreCat | DOI
 
[132]
2023 | Conference Abstract | LibreCat-ID: 44102
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster),” presented at the International Congress on Rheology, Athens, 2023.
LibreCat
 
[131]
2023 | Journal Article | LibreCat-ID: 54632 | OA
L. A. Bentrup, M. Gräßer, K. Temmen, and H.-J. Schmid, “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn,” die hochschullehre, no. 9, 2023, doi: 10.3278/HSL2310W.
LibreCat | DOI | Download (ext.)
 
[130]
2023 | Conference Abstract | LibreCat-ID: 51147
O. Massopo et al., “Influence of atomization on the particle formation in spray flame pyrolysis (Presentation),” presented at the International Congress of Particle Technology, Nürnberg, 2023.
LibreCat
 
[129]
2022 | Conference Paper | LibreCat-ID: 30220 | OA
I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44558.
LibreCat | DOI | Download (ext.)
 
[128]
2022 | Conference Paper | LibreCat-ID: 32874 | OA
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat | DOI | Download (ext.)
 
[127]
2022 | Journal Article | LibreCat-ID: 31035 | OA
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Model droplet formation in extensional filament stretching within a Filament Extension Atomizer,” Rheologica Acta, 2022, doi: 10.1007/s00397-022-01339-y.
LibreCat | DOI | Download (ext.)
 
[126]
2022 | Conference Abstract | LibreCat-ID: 37424
J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster),” presented at the 1st International Workshop on Reacting Particle-Gas Systems, Bochum, 2022.
LibreCat | Files available
 
[125]
2022 | Journal Article | LibreCat-ID: 35729
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat | Download (ext.)
 
[124]
2022 | Journal Article | LibreCat-ID: 35724
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat | Download (ext.)
 
[123]
2022 | Conference Paper | LibreCat-ID: 37436
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, and H.-J. Schmid, “Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation),” presented at the 13th World Filtration Congress, San Diego, 2022.
LibreCat | Files available
 
[122]
2022 | Conference Abstract | LibreCat-ID: 37426
J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster),” presented at the 11th International Aerosol Conference (IAC), Athens, 2022.
LibreCat | Files available
 
[121]
2022 | Conference Abstract | LibreCat-ID: 37432
J. Beimdiek and H.-J. Schmid, “Novel entrained flow SCR using online synthesized catalyst particles (Poster),” presented at the 13th World Filtration Congress, San Diego, 2022.
LibreCat | Files available
 
[120]
2022 | Conference Abstract | LibreCat-ID: 37430
J. Beimdiek and H.-J. Schmid, “Novel entrained flow SCR using online synthesized catalyst particles in flue gas cleaning systems (Presentation),” presented at the 25th ETH-Conference on Combustion Generated Nanoparticles, Zürich, 2022.
LibreCat
 
[119]
2022 | Conference Abstract | LibreCat-ID: 41160
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation),” presented at the Joint Online Symposium on Rheology, Digital, 2022.
LibreCat | Files available
 
[118]
2022 | Conference Abstract | LibreCat-ID: 41158
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instability analysis of suspensions with a polymer solution matrix (Presentation),” presented at the Annual European Rheology Conference, Sevilla, 2022.
LibreCat | Files available
 
[117]
2022 | Conference Abstract | LibreCat-ID: 33695
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Madrid, 2022.
LibreCat
 
[116]
2022 | Conference Abstract | LibreCat-ID: 43238
T. Rüther, S. Jesinghausen, and H.-J. Schmid, “A novel correction method for the shear rate in a couette rheometer (Vortrag),” presented at the AERC , Sevilla, 2022.
LibreCat | Files available
 
[115]
2022 | Conference Abstract | LibreCat-ID: 43243
T. Rüther and H.-J. Schmid, “Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster),” presented at the World Congress on Particle Technology 2022, Madrid, 2022.
LibreCat | Files available
 
[114]
2022 | Conference Abstract | LibreCat-ID: 43240
T. Rüther, S. Jesinghausen, and H.-J. Schmid, “NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag),” presented at the Joint Online Symposium on Rheology 2022, 2022.
LibreCat | Files available
 
[113]
2022 | Journal Article | LibreCat-ID: 30228
S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi: https://doi.org/10.1007/s11837-021-05042-w .
LibreCat | DOI
 
[112]
2022 | Conference Paper | LibreCat-ID: 33356 | OA
S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat | Download (ext.)
 
[111]
2022 | Journal Article | LibreCat-ID: 44468
S. Schmidt, M. Gräßer, and H.-J. Schmid, “A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges,” SIAM Journal on Scientific Computing, vol. 44, no. 4, pp. B1175–B1194, 2022, doi: 10.1137/20m1389054.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 44469
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering with PA12 and PA6 on a Standard System,” Macromolecular Symposia, vol. 404, no. 1, Art. no. 2100397, 2022, doi: 10.1002/masy.202100397.
LibreCat | DOI
 
[109]
2021 | Journal Article | LibreCat-ID: 25142
C. Kummert, H.-J. Schmid, L. Risse, and G. Kullmer, “Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures,” Journal of Materials Research, 2021, doi: 10.1557/s43578-021-00321-3.
LibreCat | DOI
 
[108]
2021 | Conference Paper | LibreCat-ID: 23760 | OA
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.
LibreCat | Download (ext.)
 
[107]
2021 | Conference Abstract | LibreCat-ID: 30364
R. Tischendorf et al., “Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen,” presented at the Jahrestreffen der ProcessNet-Fachgruppe MPS, Paderborn, 2021.
LibreCat
 
[106]
2021 | Misc | LibreCat-ID: 24202
S. Pawelczyk, S. Jesinghausen, and H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention. Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
LibreCat | Files available
 
[105]
2021 | Conference Abstract | LibreCat-ID: 30225
M. J. Rüther, D. Schulze, and H.-J. Schmid, “Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester,” presented at the Solid Freeform Fabrication Symposium, digital, 2021.
LibreCat
 
[104]
2021 | Conference Paper | LibreCat-ID: 24160 | OA
I. Kletetzka, C. Kummert, and H.-J. Schmid, “Laser Sintering Design Guidelines for media transmitting Components,” in Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Austin, 2021, vol. 32, doi: http://dx.doi.org/10.26153/tsw/17548.
LibreCat | DOI | Download (ext.)
 
[103]
2021 | Journal Article | LibreCat-ID: 26095
S. Schumacher, C. Asbach, and H.-J. Schmid, “Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections,” Gefahrstoffe, pp. 16–28, 2021, doi: 10.37544/0949-8036-2021-01-02-18.
LibreCat | DOI
 
[102]
2021 | Conference Abstract | LibreCat-ID: 27551
J. Ludwig, C. Kykal, and H.-J. Schmid, “Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation),” in Book of abstracts for the 2021 European Aerosol Conference, 2021.
LibreCat | Files available
 
[101]
2021 | Conference Abstract | LibreCat-ID: 27553
J. Ludwig and H.-J. Schmid, “Synthese und asymmetrische Funktionalisierung von submikronen Janus-Polymer-Partikeln in der Gasphase (Poster),” presented at the Jahrestreffen der ProcessNet-Fachgruppe Aerosoltechnik, 2021.
LibreCat
 
[100]
2021 | Conference Abstract | LibreCat-ID: 24475
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster),” presented at the Jahrestreffen der ProcessNet-Fachgruppen Computational Fluid Dynamics und Mehrphasenströmungen, Online, 2021.
LibreCat | Files available
 
[99]
2021 | Conference Abstract | LibreCat-ID: 30221
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Filament Extension Atomization – A novel Process for Powder Production? (Presentation),” presented at the Annual European Rheology Conference, Online, 2021.
LibreCat | Files available
 
[98]
2020 | Report | LibreCat-ID: 24943
D. Menge, S. H. Klippstein, and H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat | Download (ext.)
 
[97]
2020 | Journal Article | LibreCat-ID: 24241
D. B. Rasche, L. Tigges, and H.-J. Schmid, “An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output,” Review of Scientific Instruments, vol. 91, p. 055104, 2020, doi: 10.1063/1.5133438.
LibreCat | DOI
 
[96]
2020 | Conference Paper | LibreCat-ID: 22182
C. Kummert, W. Diekmann, K. Tews, and H.-J. Schmid, “Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens,” in 29th Annual International Solid Freeform Fabrication Symposium, 2020, vol. 29, pp. 735–744.
LibreCat | DOI
 
[95]
2020 | Conference Abstract | LibreCat-ID: 25062
R. Tischendorf et al., “Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames,” presented at the 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, Duisburg, 2020.
LibreCat | Files available
 
[94]
2020 | Journal Article | LibreCat-ID: 21949 | OA
M. Haist et al., “Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries,” Materials and Structures, 2020, doi: 10.1617/s11527-020-01477-w.
LibreCat | DOI | Download (ext.)
 
[93]
2020 | Journal Article | LibreCat-ID: 21948 | OA
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, and H.-J. Schmid, “Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures,” Materials, Art. no. 467, 2020, doi: 10.3390/ma13020467.
LibreCat | DOI | Download (ext.)
 
[92]
2019 | Report | LibreCat-ID: 24628
D. Menge, R. Walter, H.-J. Schmid, and U. P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, vol. 1338. Frankfurt, 2019.
LibreCat
 
[91]
2019 | Book Chapter | LibreCat-ID: 26098
H.-J. Schmid, G. Grundmeier, M. Dörmann, A. G. Orive, T. de los Arcos, and B. Torun, “Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges,” in Particles in Contact, Cham, 2019.
LibreCat | DOI
 
[90]
2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat | DOI
 
[89]
2019 | Conference Abstract | LibreCat-ID: 24515
R. Tischendorf, M. Bieber, R. Kneer, and H.-J. Schmid, “Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements,” presented at the PARTEC 2019 International Congress on Particle Technology, Nürnberg, 2019.
LibreCat | Files available
 
[88]
2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat | Download (ext.)
 
[87]
2019 | Journal Article | LibreCat-ID: 22541
I. Giner et al., “Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers,” Applied Surface Science, pp. 873–879, 2019, doi: 10.1016/j.apsusc.2018.12.221.
LibreCat | DOI
 
[86]
2018 | Journal Article | LibreCat-ID: 26103
S. Abishek, A. J. C. King, J. Schuler, G. Kasper, H.-J. Schmid, and B. J. Mullins, “Representative domain size for the simulation of coalescence filtration in nonwoven and foam media,” Separation and Purification Technology, pp. 344–352, 2018, doi: 10.1016/j.seppur.2018.06.051.
LibreCat | DOI
 
[85]
2018 | Conference Paper | LibreCat-ID: 22183 | OA
D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat | Download (ext.)
 
[84]
2018 | Journal Article | LibreCat-ID: 22196
C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat | DOI
 
[83]
2018 | Patent | LibreCat-ID: 29824
H.-J. Schmid and D. Rasche, “Bestimmung von Nanopartikeleigenschaften eines Aerosols.” 2018.
LibreCat | Files available
 
[82]
2017 | Book Chapter | LibreCat-ID: 26104
J. Lohn and H.-J. Schmid, “Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613,” in Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, 2017.
LibreCat | DOI
 
[81]
2017 | Journal Article | LibreCat-ID: 26106
J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, and L. Colombi Ciacchi, “Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity,” The Journal of Physical Chemistry C, pp. 15294–15303, 2017, doi: 10.1021/acs.jpcc.7b05655.
LibreCat | DOI
 
[80]
2017 | Journal Article | LibreCat-ID: 26107
M. Dörmann and H.-J. Schmid, “Distance-dependency of capillary bridges in thermodynamic equilibrium,” Powder Technology, pp. 175–183, 2017, doi: 10.1016/j.powtec.2017.01.012.
LibreCat | DOI
 
[79]
2017 | Book Chapter | LibreCat-ID: 23759
D. Menge, S. Josupeit, P. Delfs, and H.-J. Schmid, “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, H. A. Richard, B. Schramm, and T. Zipsner, Eds. Wiesbaden: Springer Vieweg, 2017, pp. 105–120.
LibreCat | DOI
 
[78]
2017 | Journal Article | LibreCat-ID: 22195
S. Josupeit and H.-J. Schmid, “Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories,” Journal of Applied Polymer Science, vol. 134, no. 42, 2017.
LibreCat | DOI
 
[77]
2016 | Journal Article | LibreCat-ID: 26109
S. Josupeit, L. Ordia, and H.-J. Schmid, “Modelling of temperatures and heat flow within laser sintered part cakes,” Additive Manufacturing, pp. 189–196, 2016, doi: 10.1016/j.addma.2016.06.002.
LibreCat | DOI
 
[76]
2016 | Journal Article | LibreCat-ID: 26111
H.-J. Schmid and S. Pieper, “Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer,” Applied Rheology, 2016, doi: 10.3933/APPLRHEOL-26-64533.
LibreCat | DOI
 
[75]
2016 | Journal Article | LibreCat-ID: 26118
S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear,” Journal of Non-Newtonian Fluid Mechanics, pp. 1–7, 2016, doi: 10.1016/j.jnnfm.2016.04.004.
LibreCat | DOI
 
[74]
2016 | Book | LibreCat-ID: 27443
J. Gausemeier et al., Additive Fertigung. München: acatech - Deutsche Akademie der Technikwissenschaften, 2016.
LibreCat
 
[73]
2016 | Conference Paper | LibreCat-ID: 22180
S. Josupeit, P. Delfs, D. Menge, and H.-J. Schmid, “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2077–2086.
LibreCat | DOI
 
[72]
2016 | Journal Article | LibreCat-ID: 22185
P. Delfs, M. Tows, and H.-J. Schmid, “Optimized build orientation of additive manufactured parts for improved surface quality and build time,” Additive Manufacturing, vol. 2, no. 12, Part B, pp. 214–320, 2016.
LibreCat | DOI
 
[71]
2016 | Conference Paper | LibreCat-ID: 22190
P. Delfs and H.-J. Schmid, “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts ,” in Fraunhofer Direct Digital Manufacturing Conference, 2016, vol. 3, pp. 411–414.
LibreCat | DOI
 
[70]
2016 | Conference Paper | LibreCat-ID: 22194
S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for application in laser sintering,” in International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 
[69]
2016 | Conference Paper | LibreCat-ID: 22200
S. Josupeit et al., “Dimensional accuracy of polymer laser sintered parts: Influences and measures,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 
[68]
2016 | Conference Paper | LibreCat-ID: 22404
S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
LibreCat | DOI
 
[67]
2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[66]
2016 | Book (Editor) | LibreCat-ID: 26113
W. Kniffka et al., Eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures. München, 2016.
LibreCat | DOI
 
[65]
2016 | Journal Article | LibreCat-ID: 21947
S. Jesinghausen, R. Weiffen, and H.-J. Schmid, “Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows,” Experiments in Fluids, 2016, doi: 10.1007/s00348-016-2241-6.
LibreCat | DOI | Download (ext.)
 
[64]
2016 | Journal Article | LibreCat-ID: 25140
S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear,” Journal of Non-Newtonian Fluid Mechanics, pp. 1–7, 2016, doi: 10.1016/j.jnnfm.2016.04.004.
LibreCat | DOI
 
[63]
2015 | Journal Article | LibreCat-ID: 26108
S. Schiller, C. Hellmich, and H.-J. Schmid, “Evaluation of the Efficiency of Filtration Processes Using Precoat Materials,” Chemical Engineering & Technology, pp. 491–498, 2015, doi: 10.1002/ceat.201500385.
LibreCat | DOI
 
[62]
2015 | Book Chapter | LibreCat-ID: 26119
J. V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, and U. A. Peuker, “Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols,” in Colloid Process Engineering, Cham, 2015.
LibreCat | DOI
 
[61]
2015 | Journal Article | LibreCat-ID: 26121
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, and H.-J. Schmid, “Bipolar charge distribution of a soft X-ray diffusion charger,” Journal of Aerosol Science, pp. 77–86, 2015, doi: 10.1016/j.jaerosci.2015.07.002.
LibreCat | DOI
 
[60]
2015 | Journal Article | LibreCat-ID: 26122
L. Tigges, A. Jain, and H.-J. Schmid, “On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations,” Journal of Aerosol Science, pp. 119–134, 2015, doi: 10.1016/j.jaerosci.2015.05.010.
LibreCat | DOI
 
[59]
2015 | Journal Article | LibreCat-ID: 26123
S. Schiller and H.-J. Schmid, “Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials,” Powder Technology, pp. 96–105, 2015, doi: 10.1016/j.powtec.2015.03.048.
LibreCat | DOI
 
[58]
2015 | Journal Article | LibreCat-ID: 26124
M. Dörmann and H.-J. Schmid, “Simulation of Capillary Bridges between Particles,” Procedia Engineering, pp. 14–23, 2015, doi: 10.1016/j.proeng.2015.01.102.
LibreCat | DOI
 
[57]
2015 | Conference Paper | LibreCat-ID: 22178
P. Delfs, Z. Li, and H.-J. Schmid, “Mass finishing of laser sintered parts,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 514–526.
LibreCat | DOI
 
[56]
2015 | Conference Paper | LibreCat-ID: 22179
S. Josupeit and H.-J. Schmid, “Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 190–199.
LibreCat | DOI
 
[55]
2015 | Conference Paper | LibreCat-ID: 22187
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid, “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 540–549.
LibreCat | DOI
 
[54]
2015 | Conference Paper | LibreCat-ID: 22189
P. Delfs, M. Toews, and H.-J. Schmid, “Surface roughness optimized alignment of parts for additive manufacturing processes,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1334–1344.
LibreCat | DOI
 
[53]
2015 | Conference Paper | LibreCat-ID: 22199
S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates,” in Proceedings of the Rapid Tech 2015, 2015, pp. 63–78.
LibreCat | DOI
 
[52]
2015 | Conference Paper | LibreCat-ID: 23074
I. Koke, K. Dibblee, F. Hankeln, S. Seidel, A. Trächtler, and H.-J. Schmid, “Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen,” in 44. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik - Hochschuldidaktik im Dialog, Paderborn, 2015.
LibreCat
 
[51]
2014 | Journal Article | LibreCat-ID: 26125
S. Pieper, N. Kirchhoff, and H.-J. Schmid, “Absence of pressure sensitivity of apparent wall slip in pressure-driven flow of non-colloidal suspensions,” Rheologica Acta, pp. 69–75, 2014, doi: 10.1007/s00397-014-0815-x.
LibreCat | DOI
 
[50]
2014 | Journal Article | LibreCat-ID: 26126
S. Schiller and H.-J. Schmid, “Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media,” Chemical Engineering & Technology, pp. 1009–1020, 2014, doi: 10.1002/ceat.201300856.
LibreCat | DOI
 
[49]
2014 | Journal Article | LibreCat-ID: 26127
M. Dörmann and H.-J. Schmid, “Simulation of Capillary Bridges between Nanoscale Particles,” Langmuir, pp. 1055–1062, 2014, doi: 10.1021/la404409k.
LibreCat | DOI
 
[48]
2014 | Conference Paper | LibreCat-ID: 22176
P. Delfs, A. A. Herale, Z. Li, and H.-J. Schmid, “Simulation of the Surface Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
LibreCat | DOI
 
[47]
2014 | Conference Paper | LibreCat-ID: 22177
S. Josupeit and H.-J. Schmid, “Three-dimensional in-process temperature measurement of laser sintered part cakes,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 49–58.
LibreCat | DOI
 
[46]
2014 | Conference Paper | LibreCat-ID: 22184
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, and H.-J. Schmid, “Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics,” in 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, vol. 72, no. 3, pp. 2383–2385.
LibreCat | DOI
 
[45]
2014 | Journal Article | LibreCat-ID: 22186
S. Rüsenberg, S. Josupeit, and H.-J. Schmid, “A method to characterize the quality of a polymer laser sintering process ,” Advances in Mechanical Engineering, vol. 6, pp. 1687–8140, 2014.
LibreCat | DOI
 
[44]
2014 | Conference Paper | LibreCat-ID: 22193
S. Josupeit, L. Ordia, and H.-J. Schmid, “Development of a Basic Model to Simulate the Laser Sintering Cooling Process,” in International Conference on Additive Technologies, 2014, vol. 5, pp. 222–227.
LibreCat | DOI
 
[43]
2014 | Conference Paper | LibreCat-ID: 22203
P. Delfs and H.-J. Schmid, “Simulation of the Surface Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
LibreCat | DOI
 
[42]
2013 | Journal Article | LibreCat-ID: 26129
J. Erler, S. Machunsky, P. Grimm, H.-J. Schmid, and U. A. Peuker, “Liquid–liquid phase transfer of magnetite nanoparticles — Evaluation of surfactants,” Powder Technology, vol. 247, pp. 265–269, 2013, doi: 10.1016/j.powtec.2012.09.047.
LibreCat | DOI
 
[41]
2013 | Journal Article | LibreCat-ID: 26130
S. Schiller and H.-J. Schmid, “Hocheffiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen mit einem Schlauchfilter,” Chemie Ingenieur Technik, pp. 1324–1328, 2013, doi: 10.1002/cite.201200114.
LibreCat | DOI
 
[40]
2013 | Conference Paper | LibreCat-ID: 22175
S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “A material-based quality concept for polymer laser sintering,” in 24th Annual International Solid Freeform Fabrication Symposium , 2013, vol. 24, pp. 44–54.
LibreCat | DOI
 
[39]
2013 | Conference Paper | LibreCat-ID: 22192
S. Rüsenberg and H.-J. Schmid, “Advanced characterization method of Nylon 12 materials for application in laser sinter processing,” in International Conference of the Polymer-Processing-Society (PPS), 2013, vol. 29.
LibreCat | DOI
 
[38]
2013 | Conference Paper | LibreCat-ID: 22197
S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien,” in Merseburger Rapid Prototyping Forum, 2013, vol. 7.
LibreCat | DOI
 
[37]
2013 | Conference Paper | LibreCat-ID: 22201
S. Rüsenberg, A. Bagsik, J. Büsching, and H.-J. Schmid, “Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie,” in RapidTech, 2013.
LibreCat
 
[36]
2012 | Journal Article | LibreCat-ID: 26132
N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, and H.-J. Schmid, “Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess,” Chemie Ingenieur Technik, pp. 1584–1589, 2012, doi: 10.1002/cite.201100223.
LibreCat | DOI
 
[35]
2012 | Journal Article | LibreCat-ID: 26133
M. J. Kirchhof, H. Förster, H.-J. Schmid, and W. Peukert, “Sintering kinetics and mechanism of vitreous nanoparticles,” Journal of Aerosol Science, vol. 45, pp. 26–39, 2012, doi: 10.1016/j.jaerosci.2011.10.006.
LibreCat | DOI
 
[34]
2012 | Conference Paper | LibreCat-ID: 22174
S. Rüsenberg, R. Weiffen, F. Knoop, and H.-J. Schmid, “Controlling the Quality of Laser Sintered Parts Along the Process Chain,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 1024–1044.
LibreCat | DOI
 
[33]
2012 | Conference Paper | LibreCat-ID: 22204
S. Rüsenberg and H.-J. Schmid, “Mechanical Properties as a Result of multitude of Parameters,” in The European Forum on Additive Manufacturing, 2012, vol. 17.
LibreCat | DOI
 
[32]
2011 | Conference Paper | LibreCat-ID: 22188
S. Rüsenberg, L. Schmidt, and H.-J. Schmid, “Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts,” in 22th Annual International Solid Freeform Fabrication Symposium, 2011, vol. 22, pp. 239–251.
LibreCat | DOI
 
[31]
2011 | Book | LibreCat-ID: 22191
S. Rüsenberg, L. Schmidt, H. Hosse, and H.-J. Schmid, Porosity as a key to increase material properties of laser sintered parts. 2011, pp. 531–538.
LibreCat | DOI
 
[30]
2010 | Journal Article | LibreCat-ID: 26134
R. Körmer, H.-J. Schmid, and W. Peukert, “Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 2: Theoretical analysis of the formation mechanism,” Journal of Aerosol Science, vol. 41, no. 11, pp. 1008–1019, 2010, doi: 10.1016/j.jaerosci.2010.08.002.
LibreCat | DOI
 
[29]
2010 | Journal Article | LibreCat-ID: 26135
R. Körmer, M. P. M. Jank, H. Ryssel, H.-J. Schmid, and W. Peukert, “Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 1: Experimental investigations,” Journal of Aerosol Science, vol. 41, no. 11, pp. 998–1007, 2010, doi: 10.1016/j.jaerosci.2010.05.007.
LibreCat | DOI
 
[28]
2010 | Journal Article | LibreCat-ID: 26136
M. Seipenbusch, S. Rothenbacher, M. Kirchhoff, H.-J. Schmid, G. Kasper, and A. P. Weber, “Interparticle forces in silica nanoparticle agglomerates,” Journal of Nanoparticle Research, vol. 12, no. 6, pp. 2037–2044, 2010, doi: 10.1007/s11051-009-9760-5.
LibreCat | DOI
 
[27]
2010 | Book Review | LibreCat-ID: 58272
J. Woppowa and H.-J. Schmid, “Gastfreundschaft. Ein Modell für den konfessionellen Religionsunterricht der Zukunft,” rhs, vol. 54, no. 2011. München, pp. 139–140, 2010.
LibreCat
 
[26]
2009 | Journal Article | LibreCat-ID: 26137
V. Vassilev, M. Gröschel, H.-J. Schmid, W. Peukert, and G. Leugering, “Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories,” Chemical Engineering Science, vol. 65, no. 6, pp. 2183–2189, 2009, doi: 10.1016/j.ces.2009.12.014.
LibreCat | DOI
 
[25]
2009 | Journal Article | LibreCat-ID: 26138
B. Al Zaitone, H.-J. Schmid, and W. Peukert, “Simulation of structure and mobility of aggregates formed by simultaneous coagulation, sintering and surface growth,” Journal of Aerosol Science, vol. 40, no. 11, pp. 950–964, 2009, doi: 10.1016/j.jaerosci.2009.08.007.
LibreCat | DOI
 
[24]
2009 | Journal Article | LibreCat-ID: 26139
S. Machunsky, P. Grimm, H.-J. Schmid, and U. A. Peuker, “Liquid–liquid phase transfer of magnetite nanoparticles,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 348, no. 1–3, pp. 186–190, 2009, doi: 10.1016/j.colsurfa.2009.07.014.
LibreCat | DOI
 
[23]
2009 | Journal Article | LibreCat-ID: 26140
M. J. Kirchhof, H.-J. Schmid, and W. Peukert, “Three-dimensional simulation of viscous-flow agglomerate sintering,” Physical Review E, vol. 80, no. 2, p. 026319, 2009, doi: 10.1103/physreve.80.026319.
LibreCat | DOI
 
[22]
2008 | Journal Article | LibreCat-ID: 26142
M. Horn and H.-J. Schmid, “A comprehensive approach in modeling Lagrangian particle deposition in turbulent boundary layers,” Powder Technology, vol. 186, no. 3, pp. 189–198, 2008, doi: 10.1016/j.powtec.2007.11.048.
LibreCat | DOI
 
[21]
2007 | Journal Article | LibreCat-ID: 26147
L. Schneider, H.-J. Schmid, and W. Peukert, “Influence of particle size and concentration on the second-harmonic signal generated at colloidal surfaces,” Applied Physics B, vol. 87, pp. 333–339, 2007, doi: 10.1007/s00340-007-2597-7.
LibreCat | DOI
 
[20]
2007 | Journal Article | LibreCat-ID: 29827
H.-J. Schmid, “Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter,” Gefahrstoffe, Reinhaltung der Luft. Air Quality Control, vol. 67, no. 4, 2007.
LibreCat
 
[19]
2006 | Journal Article | LibreCat-ID: 26145
C. Binder, C. Feichtinger, H.-J. Schmid, N. Thürey, W. Peukert, and U. Rüde, “Simulation of the hydrodynamic drag of aggregated particles,” Journal of Colloid and Interface Science, vol. 301, no. 1, pp. 155–167, 2006, doi: 10.1016/j.jcis.2006.04.045.
LibreCat | DOI
 
[18]
2006 | Journal Article | LibreCat-ID: 26148
M. Horn and H.-J. Schmid, “Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen,” Chemie Ingenieur Technik, vol. 78, no. 6, pp. 694–699, 2006, doi: 10.1002/cite.200500110.
LibreCat | DOI
 
[17]
2006 | Journal Article | LibreCat-ID: 26150
C. Artelt, H.-J. Schmid, and W. Peukert, “Modelling titania formation at typical industrial process conditions: effect of surface shielding and surface energy on relevant growth mechanisms,” Chemical Engineering Science, vol. 61, no. 1, pp. 18–32, 2006, doi: 10.1016/j.ces.2004.12.053.
LibreCat | DOI
 
[16]
2005 | Journal Article | LibreCat-ID: 26149
H.-C. Schwarzer, F. Schwertfirm, M. Manhart, H.-J. Schmid, and W. Peukert, “Predictive simulation of nanoparticle precipitation based on the population balance equation,” Chemical Engineering Science, vol. 61, no. 1, pp. 167–181, 2005, doi: 10.1016/j.ces.2004.11.064.
LibreCat | DOI
 
[15]
2005 | Journal Article | LibreCat-ID: 26151
H.-J. Schmid, B. Al-Zaitone, C. Artelt, and W. Peukert, “Evolution of the fractal dimension for simultaneous coagulation and sintering,” Chemical Engineering Science, vol. 61, no. 1, pp. 293–305, 2005, doi: 10.1016/j.ces.2004.11.068.
LibreCat | DOI
 
[14]
2005 | Journal Article | LibreCat-ID: 26153
C. Artelt, H.-J. Schmid, and W. Peukert, “On the impact of accessible surface and surface energy on particle formation and growth from the vapour phase,” Journal of Aerosol Science, vol. 36, no. 2, pp. 147–172, 2005, doi: 10.1016/j.jaerosci.2004.08.003.
LibreCat | DOI
 
[13]
2004 | Journal Article | LibreCat-ID: 26152
H.-J. Schmid, S. Tejwani, C. Artelt, and W. Peukert, “Monte Carlo simulation of aggregate morphology for simultaneous coagulation and sintering,” Journal of Nanoparticle Research, vol. 6, no. 6, pp. 613–626, 2004, doi: 10.1007/s11051-004-2161-x.
LibreCat | DOI
 
[12]
2004 | Journal Article | LibreCat-ID: 26154
M. J. Kirchhof, H.-J. Schmid, and W. Peukert, “Reactor system for the study of high-temperature short-time sintering of nanoparticles,” Review of Scientific Instruments, vol. 75, no. 11, pp. 4833–4840, 2004, doi: 10.1063/1.1809258.
LibreCat | DOI
 
[11]
2004 | Journal Article | LibreCat-ID: 26155
A. Messerer, H.-J. Schmid, C. Knab, U. Pöschl, and R. Nießner, “Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen,” Chemie Ingenieur Technik, vol. 76, no. 8, pp. 1092–1096, 2004, doi: 10.1002/cite.200403418.
LibreCat | DOI
 
[10]
2003 | Journal Article | LibreCat-ID: 26156
H.-J. Schmid and L. Vogel, “On the modelling of the particle dynamics in electro-hydrodynamic flow-fields: I. Comparison of Eulerian and Lagrangian modelling approach,” Powder Technology, vol. 135/136, pp. 118–135, 2003, doi: 10.1016/j.powtec.2003.08.009.
LibreCat | DOI
 
[9]
2003 | Journal Article | LibreCat-ID: 26157
H.-J. Schmid, “On the modelling of the particle dynamics in electro-hydrodynamic flow fields: II. Influences of inhomogeneities on electrostatic precipitation,” Powder Technology, vol. 135/136, pp. 136–149, 2003, doi: 10.1016/j.powtec.2003.08.010.
LibreCat | DOI
 
[8]
2003 | Journal Article | LibreCat-ID: 26158
W. Peukert and H.-J. Schmid, “Herausforderungen für die Lehre am Beispiel der mechanischen Verfahrenstechnik,” Chemie Ingenieur Technik, vol. 75, no. 3, pp. 177–183, 2003, doi: 10.1002/cite.200390035.
LibreCat | DOI
 
[7]
2003 | Journal Article | LibreCat-ID: 26159
C. Artelt, H.-J. Schmid, and W. Peukert, “On the relevance of accounting for the evolution of the fractal dimension in aerosol process simulations,” Journal of Aerosol Science, vol. 34, no. 5, pp. 511–534, 2003, doi: 10.1016/s0021-8502(03)00005-3.
LibreCat | DOI
 
[6]
2002 | Journal Article | LibreCat-ID: 26160
A. Schiel, A. P. Weber, G. Kasper, and H.-J. Schmid, “In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures,” Particle & Particle Systems Characterization, vol. 19, no. 6, pp. 410–418, 2002, doi: 10.1002/ppsc.200290004.
LibreCat | DOI
 
[5]
2002 | Journal Article | LibreCat-ID: 26161
H.-J. Schmid, S. Veith, and H. Umhauer, “In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow,” Particle & Particle Systems Characterization, vol. 19, no. 3, Art. no. 203, 2002, doi: 10.1002/1521-4117(200207)19:3<203::aid-ppsc203>3.0.co;2-7.
LibreCat | DOI
 
[4]
2002 | Book Chapter | LibreCat-ID: 26169
H.-J. Schmid, “Trennprozesse: Abschnitt 7.5.3,” in Handbuch der Mechanischen Verfahrenstechnik, 2002.
LibreCat | DOI
 
[3]
2002 | Journal Article | LibreCat-ID: 29826
H.-J. Schmid and W. Peukert, “Novel Concepts for Teaching Particle Technology ,” chemical engineering education, vol. 36, no. 4, 2002.
LibreCat | Download (ext.)
 
[2]
2002 | Journal Article | LibreCat-ID: 29484
H.-J. Schmid, “On the Modelling of the Electro-Hydrodynamic Flow Field in Electrostatic Precipitators,” Flow, Turbulence and Combustion, vol. 68, pp. 63–89, 2002, doi: 10.1023/A:1015666116174.
LibreCat | DOI
 
[1]
1998 | Dissertation | LibreCat-ID: 29825
H.-J. Schmid, Zum Partikeltransport in Elektrischen Abscheidern. Shaker Verlag, 1998.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

154 Publications

Mark all

[154]
2024 | Special Issue | LibreCat-ID: 51133
R. Tischendorf et al., Eds., Maghemite nanoparticles synthesis via spray flame synthesis and particle characterization by hole in a tube sampling and scanning mobility particle sizing (HIAT-SMPS). Elsevier, 2024.
LibreCat | DOI | Download (ext.)
 
[153]
2024 | Journal Article | LibreCat-ID: 52357 | OA
J. Beimdiek and H.-J. Schmid, “Evaluation of Surrogate Aerosol Experiments to Predict Spreading and Removal of Virus-Laden Aerosols,” Atmosphere, vol. 15, no. 3, Art. no. 305, 2024, doi: 10.3390/atmos15030305.
LibreCat | DOI | Download (ext.)
 
[152]
2024 | Conference Abstract | LibreCat-ID: 56958
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particle-induced Instabilities in Uniaxially Elongated Thermoplastic Polymer Blends ,” 2024.
LibreCat
 
[151]
2024 | Mastersthesis | LibreCat-ID: 51149
J. Reimer, O. Massopo, and H.-J. Schmid, Entwicklung einer Datenbank hergestellter Nanomaterialien mittels Gasphasensynthese (Studienarbeit). .
LibreCat
 
[150]
2023 | Conference Abstract | LibreCat-ID: 47626
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in PARTEC International Congress on Particle Technology - Book of Abstracts, Nürnberg, 2023, pp. 172–176.
LibreCat
 
[149]
2023 | Conference Paper | LibreCat-ID: 46764 | OA
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, vol. 34.
LibreCat | Download (ext.)
 
[148]
2023 | Special Issue | LibreCat-ID: 51136
F. Fröde et al., Eds., Large eddy simulation of iron oxide formation in a laboratory spray flame. Elsevier, 2023.
LibreCat | DOI | Download (ext.)
 
[147]
2023 | Conference Abstract | LibreCat-ID: 51145
O. Massopo, H.-J. Schmid, M. Gonchikzhapov, and T. Kasper, “Nanoparticle Concentration Measurement in Flame Spray Pyrolysis (Poster),” presented at the European Aerosol Conference, Málaga, Spain , 2023.
LibreCat
 
[146]
2023 | Conference Abstract | LibreCat-ID: 51142
O. Massopo et al., “Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag),” presented at the Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.
LibreCat
 
[145]
2023 | Conference Abstract | LibreCat-ID: 51726
J. Beimdiek, S. Schiller, and H.-J. Schmid, “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster),” presented at the Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn, 2023.
LibreCat | Files available
 
[144]
2023 | Conference Paper | LibreCat-ID: 51727
J. Beimdiek, S. Schiller, and H.-J. Schmid, “Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system,” presented at the International Congress on Particle Technology | PARTEC 2023, Nürnberg, 2023.
LibreCat | Files available
 
[143]
2023 | Conference Paper | LibreCat-ID: 51218 | OA
I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50931.
LibreCat | DOI | Download (ext.)
 
[142]
2023 | Conference Paper | LibreCat-ID: 46862 | OA
F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,” in Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Austin, 2023, doi: https://doi.org/10.26153/tsw/50926.
LibreCat | DOI | Download (ext.)
 
[141]
2023 | Journal Article | LibreCat-ID: 36983 | OA
S. Josch, S. Jesinghausen, C. Dechert, and H.-J. Schmid, “Experimental and simulative determination and correction of the effective gap extension in structured coaxial measuring systems,” Rheologica Acta, 2023, doi: 10.1007/s00397-023-01383-2.
LibreCat | DOI | Download (ext.)
 
[140]
2023 | Conference Abstract | LibreCat-ID: 43236
T. Rüther and H.-J. Schmid, “CDMA: Centrifugal Differential Mobility Analyzer - Ein Messprinzip zur Bestimmung von Multidimensionalen Partikeleigenschaften (Vortrag),” presented at the DECHEMA Jahrestreffen PMT 2023, Paderborn, 2023.
LibreCat | Files available
 
[139]
2023 | Journal Article | LibreCat-ID: 43034 | OA
S. Josch, S. Jesinghausen, and H.-J. Schmid, “Development of an adaptive coaxial concrete rheometer and rheological characterisation of fresh concrete,” Applied Rheology, vol. 33, no. 1, 2023, doi: 10.1515/arh-2022-0140.
LibreCat | DOI | Download (ext.)
 
[138]
2023 | Journal Article | LibreCat-ID: 43128
M. J. Rüther, S. H. Klippstein, S. Ponusamy, T. Rüther, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Powder Technology, vol. 422, Art. no. 118460, 2023, doi: 10.1016/j.powtec.2023.118460.
LibreCat | DOI
 
[137]
2023 | Conference Abstract | LibreCat-ID: 44244
S. Ponusamy and H.-J. Schmid, “Dynamisch-mechanische Polymerpartikelverrundung zur Verbesserung der Fließfähigkeit für das selektive Lasersintern,” presented at the Jahrestreffen der Fachgruppen Zerkleinern / Klassieren / Agglomerations- und Schüttguttechnik, Braunschweig, 2023.
LibreCat | Files available
 
[136]
2023 | Conference Abstract | LibreCat-ID: 44103
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Particles as Seeds for Instabilities in Uniaxially Elongated Polymer Suspension Filaments (Presentation),” presented at the Annual Meeting of the German Rheological Society (DRG) , Berlin, 2023.
LibreCat
 
[135]
2023 | Journal Article | LibreCat-ID: 46815 | OA
I. Kletetzka, M. Kosanke, D. Meinderink, V. Neßlinger, G. Grundmeier, and H.-J. Schmid, “Influence of the filler–matrix adhesion and the effects of conditioning on tensile properties of laser-sintered parts built with polyamide–glass bead dry blends,” Progress in Additive Manufacturing, 2023, doi: 10.1007/s40964-023-00501-z.
LibreCat | DOI | Download (ext.)
 
[134]
2023 | Journal Article | LibreCat-ID: 43046 | OA
S. H. Klippstein, I. Kletetzka, I. Sural, and H.-J. Schmid, “Influence of a prolonged shelf time on PA12 laser sintering powder and resulting part properties,” The International Journal of Advanced Manufacturing Technology , 2023, doi: https://doi.org/10.1007/s00170-023-11243-1.
LibreCat | DOI | Download (ext.)
 
[133]
2023 | Book Chapter | LibreCat-ID: 46870
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.
LibreCat | DOI
 
[132]
2023 | Conference Abstract | LibreCat-ID: 44102
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instabilities of Polymer Melt Suspensions under Uniaxial Extension (Poster),” presented at the International Congress on Rheology, Athens, 2023.
LibreCat
 
[131]
2023 | Journal Article | LibreCat-ID: 54632 | OA
L. A. Bentrup, M. Gräßer, K. Temmen, and H.-J. Schmid, “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn,” die hochschullehre, no. 9, 2023, doi: 10.3278/HSL2310W.
LibreCat | DOI | Download (ext.)
 
[130]
2023 | Conference Abstract | LibreCat-ID: 51147
O. Massopo et al., “Influence of atomization on the particle formation in spray flame pyrolysis (Presentation),” presented at the International Congress of Particle Technology, Nürnberg, 2023.
LibreCat
 
[129]
2022 | Conference Paper | LibreCat-ID: 30220 | OA
I. Kletetzka, R. Gawlikowicz, and H.-J. Schmid, “Effects of spherical fillers on the processability and mechanical properties of PA613 and PP-based LS dry blends,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44558.
LibreCat | DOI | Download (ext.)
 
[128]
2022 | Conference Paper | LibreCat-ID: 32874 | OA
I. Kletetzka, S. H. Klippstein, and H.-J. Schmid, “Shelf Life of Polyamide 12 (PA2200) Laser Sintering Powder,” in Proceedings of the 33th Annual International Solid Freeform Fabrication Symposium, Austin, 2022, vol. 33, doi: http://dx.doi.org/10.26153/tsw/44555.
LibreCat | DOI | Download (ext.)
 
[127]
2022 | Journal Article | LibreCat-ID: 31035 | OA
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Model droplet formation in extensional filament stretching within a Filament Extension Atomizer,” Rheologica Acta, 2022, doi: 10.1007/s00397-022-01339-y.
LibreCat | DOI | Download (ext.)
 
[126]
2022 | Conference Abstract | LibreCat-ID: 37424
J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using an online synthesized catalyst (Poster),” presented at the 1st International Workshop on Reacting Particle-Gas Systems, Bochum, 2022.
LibreCat | Files available
 
[125]
2022 | Journal Article | LibreCat-ID: 35729
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 2,” Werkstoffe, vol. 6, pp. 18–19, 2022.
LibreCat | Download (ext.)
 
[124]
2022 | Journal Article | LibreCat-ID: 35724
M. J. Rüther, S. H. Klippstein, S. Ponusamy, S. Jesinghausen, and H.-J. Schmid, “Innovative Werkstoffherstellung für das Polymer Laser Sintern – Teil 1,” Werkstoffe, vol. 5, pp. 28–29, 2022.
LibreCat | Download (ext.)
 
[123]
2022 | Conference Paper | LibreCat-ID: 37436
J. Beimdiek, F. Prill, M. König, M. Müller, I. Hartmann, and H.-J. Schmid, “Combined filtration process for biomass combustion plants to comply with legal requirements (Presentation),” presented at the 13th World Filtration Congress, San Diego, 2022.
LibreCat | Files available
 
[122]
2022 | Conference Abstract | LibreCat-ID: 37426
J. Beimdiek and H.-J. Schmid, “A combined flue gas cleaning system with a novel entrained flow SCR using online synthesized catalyst particles (Poster),” presented at the 11th International Aerosol Conference (IAC), Athens, 2022.
LibreCat | Files available
 
[121]
2022 | Conference Abstract | LibreCat-ID: 37432
J. Beimdiek and H.-J. Schmid, “Novel entrained flow SCR using online synthesized catalyst particles (Poster),” presented at the 13th World Filtration Congress, San Diego, 2022.
LibreCat | Files available
 
[120]
2022 | Conference Abstract | LibreCat-ID: 37430
J. Beimdiek and H.-J. Schmid, “Novel entrained flow SCR using online synthesized catalyst particles in flue gas cleaning systems (Presentation),” presented at the 25th ETH-Conference on Combustion Generated Nanoparticles, Zürich, 2022.
LibreCat
 
[119]
2022 | Conference Abstract | LibreCat-ID: 41160
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Triggering instabilities of polymer solution suspensions under uniaxial extension  (Presentation),” presented at the Joint Online Symposium on Rheology, Digital, 2022.
LibreCat | Files available
 
[118]
2022 | Conference Abstract | LibreCat-ID: 41158
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instability analysis of suspensions with a polymer solution matrix (Presentation),” presented at the Annual European Rheology Conference, Sevilla, 2022.
LibreCat | Files available
 
[117]
2022 | Conference Abstract | LibreCat-ID: 33695
M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Flowability of polymer powders at elevated temperatures for additive manufacturing,” Madrid, 2022.
LibreCat
 
[116]
2022 | Conference Abstract | LibreCat-ID: 43238
T. Rüther, S. Jesinghausen, and H.-J. Schmid, “A novel correction method for the shear rate in a couette rheometer (Vortrag),” presented at the AERC , Sevilla, 2022.
LibreCat | Files available
 
[115]
2022 | Conference Abstract | LibreCat-ID: 43243
T. Rüther and H.-J. Schmid, “Multidimensional particle characterization: Centrifugal Differential Mobility Analyzer (Poster),” presented at the World Congress on Particle Technology 2022, Madrid, 2022.
LibreCat | Files available
 
[114]
2022 | Conference Abstract | LibreCat-ID: 43240
T. Rüther, S. Jesinghausen, and H.-J. Schmid, “NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag),” presented at the Joint Online Symposium on Rheology 2022, 2022.
LibreCat | Files available
 
[113]
2022 | Journal Article | LibreCat-ID: 30228
S. H. Klippstein, F. Heiny, N. Pashikanti, M. Gessler, and H.-J. Schmid, “Powder Spread Process Monitoring in Polymer Laser Sintering and its Influences on Part Properties,” JOM - The Journal of The Minerals, Metals & Materials Society (TMS), vol. 74, pp. 1149–1157, 2022, doi: https://doi.org/10.1007/s11837-021-05042-w .
LibreCat | DOI
 
[112]
2022 | Conference Paper | LibreCat-ID: 33356 | OA
S. H. Klippstein and H.-J. Schmid, “Powder Spread Flaws in Polymer Laser Sintering and its Influences on Mechanical Performance,” 2022.
LibreCat | Download (ext.)
 
[111]
2022 | Journal Article | LibreCat-ID: 44468
S. Schmidt, M. Gräßer, and H.-J. Schmid, “A Shape Newton Scheme for Deforming Shells with Application to Capillary Bridges,” SIAM Journal on Scientific Computing, vol. 44, no. 4, pp. B1175–B1194, 2022, doi: 10.1137/20m1389054.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 44469
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering with PA12 and PA6 on a Standard System,” Macromolecular Symposia, vol. 404, no. 1, Art. no. 2100397, 2022, doi: 10.1002/masy.202100397.
LibreCat | DOI
 
[109]
2021 | Journal Article | LibreCat-ID: 25142
C. Kummert, H.-J. Schmid, L. Risse, and G. Kullmer, “Mechanical characterization and numerical modeling of laser-sintered TPE lattice structures,” Journal of Materials Research, 2021, doi: 10.1557/s43578-021-00321-3.
LibreCat | DOI
 
[108]
2021 | Conference Paper | LibreCat-ID: 23760 | OA
D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.
LibreCat | Download (ext.)
 
[107]
2021 | Conference Abstract | LibreCat-ID: 30364
R. Tischendorf et al., “Einfluss der Zerstäubung auf die Partikelsynthese in Sprayflammen,” presented at the Jahrestreffen der ProcessNet-Fachgruppe MPS, Paderborn, 2021.
LibreCat
 
[106]
2021 | Misc | LibreCat-ID: 24202
S. Pawelczyk, S. Jesinghausen, and H.-J. Schmid, Charakterisierung des Fließverhaltens von Frischbeton – Entwicklung eines adaptiven Rheometers (ACCR) und Einfluss von Maßnahmen zur Sedimentationsprävention. Digitales Jahrestreffen der ProcessNet Fachgruppen MPH und CFD, 2021.
LibreCat | Files available
 
[105]
2021 | Conference Abstract | LibreCat-ID: 30225
M. J. Rüther, D. Schulze, and H.-J. Schmid, “Flowability Measurements of Different SLS Materials at Elevated Temperatures with a Modified Schulze Ring Shear Tester,” presented at the Solid Freeform Fabrication Symposium, digital, 2021.
LibreCat
 
[104]
2021 | Conference Paper | LibreCat-ID: 24160 | OA
I. Kletetzka, C. Kummert, and H.-J. Schmid, “Laser Sintering Design Guidelines for media transmitting Components,” in Proceedings of the 32nd Annual International Solid Freeform Fabrication Symposium, Austin, 2021, vol. 32, doi: http://dx.doi.org/10.26153/tsw/17548.
LibreCat | DOI | Download (ext.)
 
[103]
2021 | Journal Article | LibreCat-ID: 26095
S. Schumacher, C. Asbach, and H.-J. Schmid, “Effektivität von Luftreinigern zur Reduzierung des COVID-19-Infektionsrisikos/ Efficacy of air purifiers in reducing the risk of COVID-19 infections,” Gefahrstoffe, pp. 16–28, 2021, doi: 10.37544/0949-8036-2021-01-02-18.
LibreCat | DOI
 
[102]
2021 | Conference Abstract | LibreCat-ID: 27551
J. Ludwig, C. Kykal, and H.-J. Schmid, “Assessing spreading and removal of virus laden aerosols in different settings using an aerosol method (Presentation),” in Book of abstracts for the 2021 European Aerosol Conference, 2021.
LibreCat | Files available
 
[101]
2021 | Conference Abstract | LibreCat-ID: 27553
J. Ludwig and H.-J. Schmid, “Synthese und asymmetrische Funktionalisierung von submikronen Janus-Polymer-Partikeln in der Gasphase (Poster),” presented at the Jahrestreffen der ProcessNet-Fachgruppe Aerosoltechnik, 2021.
LibreCat
 
[100]
2021 | Conference Abstract | LibreCat-ID: 24475
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster),” presented at the Jahrestreffen der ProcessNet-Fachgruppen Computational Fluid Dynamics und Mehrphasenströmungen, Online, 2021.
LibreCat | Files available
 
[99]
2021 | Conference Abstract | LibreCat-ID: 30221
M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Filament Extension Atomization – A novel Process for Powder Production? (Presentation),” presented at the Annual European Rheology Conference, Online, 2021.
LibreCat | Files available
 
[98]
2020 | Report | LibreCat-ID: 24943
D. Menge, S. H. Klippstein, and H.-J. Schmid, Additive Leichtbaustrukturen für die Flugzeugkabine. 2020.
LibreCat | Download (ext.)
 
[97]
2020 | Journal Article | LibreCat-ID: 24241
D. B. Rasche, L. Tigges, and H.-J. Schmid, “An Apparatus to Synthesize Ceramic Nanoparticles with a Precisely Adjusted Temperature History and a Significant Mass Output,” Review of Scientific Instruments, vol. 91, p. 055104, 2020, doi: 10.1063/1.5133438.
LibreCat | DOI
 
[96]
2020 | Conference Paper | LibreCat-ID: 22182
C. Kummert, W. Diekmann, K. Tews, and H.-J. Schmid, “Influence of Part Microstructure on Mechanicl Properties of PA6X Laser Sintered Specimens,” in 29th Annual International Solid Freeform Fabrication Symposium, 2020, vol. 29, pp. 735–744.
LibreCat | DOI
 
[95]
2020 | Conference Abstract | LibreCat-ID: 25062
R. Tischendorf et al., “Influence of differing nozzle configurations on the final particle characteristics and particle structure evolution in spray flames,” presented at the 4th International Symposium Gas‐Phase Synthesis of Functional Nanomaterials, Duisburg, 2020.
LibreCat | Files available
 
[94]
2020 | Journal Article | LibreCat-ID: 21949 | OA
M. Haist et al., “Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries,” Materials and Structures, 2020, doi: 10.1617/s11527-020-01477-w.
LibreCat | DOI | Download (ext.)
 
[93]
2020 | Journal Article | LibreCat-ID: 21948 | OA
S. Pawelczyk, M. Kniepkamp, S. Jesinghausen, and H.-J. Schmid, “Absolute Rheological Measurements of Model Suspensions: Influence and Correction of Wall Slip Prevention Measures,” Materials, Art. no. 467, 2020, doi: 10.3390/ma13020467.
LibreCat | DOI | Download (ext.)
 
[92]
2019 | Report | LibreCat-ID: 24628
D. Menge, R. Walter, H.-J. Schmid, and U. P. Breuer, FVA-Nr. 813 I - Generative Verfahren zur Herstellung von Polymerbauteilen, vol. 1338. Frankfurt, 2019.
LibreCat
 
[91]
2019 | Book Chapter | LibreCat-ID: 26098
H.-J. Schmid, G. Grundmeier, M. Dörmann, A. G. Orive, T. de los Arcos, and B. Torun, “Understanding and Manipulation of Nanoparticle Contact Forces by Capillary Bridges,” in Particles in Contact, Cham, 2019.
LibreCat | DOI
 
[90]
2019 | Conference Paper | LibreCat-ID: 22198
S. H. Klippstein and H.-J. Schmid, “Methodik zur Qualifizierung des Lasersinter Prozesses für die Serienfertigung,” 2019, doi: 10.3139/9783446462441.025.
LibreCat | DOI
 
[89]
2019 | Conference Abstract | LibreCat-ID: 24515
R. Tischendorf, M. Bieber, R. Kneer, and H.-J. Schmid, “Representative Sample Extraction from Spray Flames for SMPS and HR-TEM Measurements,” presented at the PARTEC 2019 International Congress on Particle Technology, Nürnberg, 2019.
LibreCat | Files available
 
[88]
2019 | Conference Paper | LibreCat-ID: 22202
S. H. Klippstein, A. Duchting, T. Reiher, F. Hengsbach, D. Menge, and H.-J. Schmid, “Devolopment, Production and post-processing of a topology optimized aircraft bracket ,” in 30th Annual International Solid Freeform Fabrication Symposium, 2019, vol. 30, pp. 1932–1945.
LibreCat | Download (ext.)
 
[87]
2019 | Journal Article | LibreCat-ID: 22541
I. Giner et al., “Water adsorption and capillary bridge formation on silica micro-particle layers modified with perfluorinated organosilane monolayers,” Applied Surface Science, pp. 873–879, 2019, doi: 10.1016/j.apsusc.2018.12.221.
LibreCat | DOI
 
[86]
2018 | Journal Article | LibreCat-ID: 26103
S. Abishek, A. J. C. King, J. Schuler, G. Kasper, H.-J. Schmid, and B. J. Mullins, “Representative domain size for the simulation of coalescence filtration in nonwoven and foam media,” Separation and Purification Technology, pp. 344–352, 2018, doi: 10.1016/j.seppur.2018.06.051.
LibreCat | DOI
 
[85]
2018 | Conference Paper | LibreCat-ID: 22183 | OA
D. Menge, P. Delfs, M. Töws, and H.-J. Schmid, “Topology Optimized Heat Transfer Using the Example of an Electronic Housing,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 687–697.
LibreCat | Download (ext.)
 
[84]
2018 | Journal Article | LibreCat-ID: 22196
C. Kummert, S. Josupeit, and H.-J. Schmid, “Thermoplastic Elastomer Part Color as Function of Temperature Histories and Oxygen Atmosphere During Selective Laser Sinterung,” Journal of Minerals, Metals and Materials Society, vol. 70, no. 3, pp. 425–430, 2018.
LibreCat | DOI
 
[83]
2018 | Patent | LibreCat-ID: 29824
H.-J. Schmid and D. Rasche, “Bestimmung von Nanopartikeleigenschaften eines Aerosols.” 2018.
LibreCat | Files available
 
[82]
2017 | Book Chapter | LibreCat-ID: 26104
J. Lohn and H.-J. Schmid, “Aufbau einer Lasersinter-Versuchsanlage und Verarbeitung neuer Materialien am Beispiel von Polyamid 6 und Polyamid 613,” in Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, München, 2017.
LibreCat | DOI
 
[81]
2017 | Journal Article | LibreCat-ID: 26106
J. Laube, M. Dörmann, H.-J. Schmid, L. Mädler, and L. Colombi Ciacchi, “Dependencies of the Adhesion Forces between TiO2 Nanoparticles on Size and Ambient Humidity,” The Journal of Physical Chemistry C, pp. 15294–15303, 2017, doi: 10.1021/acs.jpcc.7b05655.
LibreCat | DOI
 
[80]
2017 | Journal Article | LibreCat-ID: 26107
M. Dörmann and H.-J. Schmid, “Distance-dependency of capillary bridges in thermodynamic equilibrium,” Powder Technology, pp. 175–183, 2017, doi: 10.1016/j.powtec.2017.01.012.
LibreCat | DOI
 
[79]
2017 | Book Chapter | LibreCat-ID: 23759
D. Menge, S. Josupeit, P. Delfs, and H.-J. Schmid, “Herstellbarkeit und mechanische Charakterisierung von lasergesinterten Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, H. A. Richard, B. Schramm, and T. Zipsner, Eds. Wiesbaden: Springer Vieweg, 2017, pp. 105–120.
LibreCat | DOI
 
[78]
2017 | Journal Article | LibreCat-ID: 22195
S. Josupeit and H.-J. Schmid, “Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories,” Journal of Applied Polymer Science, vol. 134, no. 42, 2017.
LibreCat | DOI
 
[77]
2016 | Journal Article | LibreCat-ID: 26109
S. Josupeit, L. Ordia, and H.-J. Schmid, “Modelling of temperatures and heat flow within laser sintered part cakes,” Additive Manufacturing, pp. 189–196, 2016, doi: 10.1016/j.addma.2016.06.002.
LibreCat | DOI
 
[76]
2016 | Journal Article | LibreCat-ID: 26111
H.-J. Schmid and S. Pieper, “Guard ring induced distortion of the steady velocity profile in a parallel plate rheometer,” Applied Rheology, 2016, doi: 10.3933/APPLRHEOL-26-64533.
LibreCat | DOI
 
[75]
2016 | Journal Article | LibreCat-ID: 26118
S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear,” Journal of Non-Newtonian Fluid Mechanics, pp. 1–7, 2016, doi: 10.1016/j.jnnfm.2016.04.004.
LibreCat | DOI
 
[74]
2016 | Book | LibreCat-ID: 27443
J. Gausemeier et al., Additive Fertigung. München: acatech - Deutsche Akademie der Technikwissenschaften, 2016.
LibreCat
 
[73]
2016 | Conference Paper | LibreCat-ID: 22180
S. Josupeit, P. Delfs, D. Menge, and H.-J. Schmid, “Manufacturability and Mechanical Characterization of Laser Sintered Lattice Structures,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 2077–2086.
LibreCat | DOI
 
[72]
2016 | Journal Article | LibreCat-ID: 22185
P. Delfs, M. Tows, and H.-J. Schmid, “Optimized build orientation of additive manufactured parts for improved surface quality and build time,” Additive Manufacturing, vol. 2, no. 12, Part B, pp. 214–320, 2016.
LibreCat | DOI
 
[71]
2016 | Conference Paper | LibreCat-ID: 22190
P. Delfs and H.-J. Schmid, “Extended Analysis of the Surface Topography of Laser Sintered Polymer Parts ,” in Fraunhofer Direct Digital Manufacturing Conference, 2016, vol. 3, pp. 411–414.
LibreCat | DOI
 
[70]
2016 | Conference Paper | LibreCat-ID: 22194
S. Josupeit and H.-J. Schmid, “Thermal properties of polyamide 12 powder for application in laser sintering,” in International Congress on Particle Technology (PARTEC) , 2016.
LibreCat
 
[69]
2016 | Conference Paper | LibreCat-ID: 22200
S. Josupeit et al., “Dimensional accuracy of polymer laser sintered parts: Influences and measures,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing , 2016, pp. 107–120.
LibreCat | DOI
 
[68]
2016 | Conference Paper | LibreCat-ID: 22404
S. Lammers et al., “Additive Manufacturing of a Lightweight Rotor for a Permanent Magnet Synchronous Machine,” in EDPC 2016, 2016.
LibreCat | DOI
 
[67]
2016 | Conference Paper | LibreCat-ID: 22408
S. Josupeit, P. Delfs, T. Lieneke, and H.-J. Schmid, “Influences on the dimensional Accuracy of Laser Sintered Parts along the Process Chain,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016.
LibreCat
 
[66]
2016 | Book (Editor) | LibreCat-ID: 26113
W. Kniffka et al., Eds., Geometrische Genauigkeit von Lasersinter-Bauteilen: Einflüsse und Maßnahmen / Dimensional accuracy of polymer laser sintered parts: Influences and measures. München, 2016.
LibreCat | DOI
 
[65]
2016 | Journal Article | LibreCat-ID: 21947
S. Jesinghausen, R. Weiffen, and H.-J. Schmid, “Direct measurement of wall slip and slip layer thickness of non-Brownian hard-sphere suspensions in rectangular channel flows,” Experiments in Fluids, 2016, doi: 10.1007/s00348-016-2241-6.
LibreCat | DOI | Download (ext.)
 
[64]
2016 | Journal Article | LibreCat-ID: 25140
S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions in a parallel plate rheometer under steady shear,” Journal of Non-Newtonian Fluid Mechanics, pp. 1–7, 2016, doi: 10.1016/j.jnnfm.2016.04.004.
LibreCat | DOI
 
[63]
2015 | Journal Article | LibreCat-ID: 26108
S. Schiller, C. Hellmich, and H.-J. Schmid, “Evaluation of the Efficiency of Filtration Processes Using Precoat Materials,” Chemical Engineering & Technology, pp. 491–498, 2015, doi: 10.1002/ceat.201500385.
LibreCat | DOI
 
[62]
2015 | Book Chapter | LibreCat-ID: 26119
J. V. Erler, S. Machunsky, S. Franke, P. Grimm, H.-J. Schmid, and U. A. Peuker, “Process Development of a Liquid-Liquid Phase Transfer of Colloidal Particles for Production of High-Quality Organosols,” in Colloid Process Engineering, Cham, 2015.
LibreCat | DOI
 
[61]
2015 | Journal Article | LibreCat-ID: 26121
L. Tigges, A. Wiedensohler, K. Weinhold, J. Gandhi, and H.-J. Schmid, “Bipolar charge distribution of a soft X-ray diffusion charger,” Journal of Aerosol Science, pp. 77–86, 2015, doi: 10.1016/j.jaerosci.2015.07.002.
LibreCat | DOI
 
[60]
2015 | Journal Article | LibreCat-ID: 26122
L. Tigges, A. Jain, and H.-J. Schmid, “On the bipolar charge distribution used for mobility particle sizing: Theoretical considerations,” Journal of Aerosol Science, pp. 119–134, 2015, doi: 10.1016/j.jaerosci.2015.05.010.
LibreCat | DOI
 
[59]
2015 | Journal Article | LibreCat-ID: 26123
S. Schiller and H.-J. Schmid, “Highly efficient filtration of ultrafine dust in baghouse filters using precoat materials,” Powder Technology, pp. 96–105, 2015, doi: 10.1016/j.powtec.2015.03.048.
LibreCat | DOI
 
[58]
2015 | Journal Article | LibreCat-ID: 26124
M. Dörmann and H.-J. Schmid, “Simulation of Capillary Bridges between Particles,” Procedia Engineering, pp. 14–23, 2015, doi: 10.1016/j.proeng.2015.01.102.
LibreCat | DOI
 
[57]
2015 | Conference Paper | LibreCat-ID: 22178
P. Delfs, Z. Li, and H.-J. Schmid, “Mass finishing of laser sintered parts,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 514–526.
LibreCat | DOI
 
[56]
2015 | Conference Paper | LibreCat-ID: 22179
S. Josupeit and H.-J. Schmid, “Temperature History within Laser Sintered Part Cakes and its Influence on Process Quality,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 190–199.
LibreCat | DOI
 
[55]
2015 | Conference Paper | LibreCat-ID: 22187
S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid, “Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 540–549.
LibreCat | DOI
 
[54]
2015 | Conference Paper | LibreCat-ID: 22189
P. Delfs, M. Toews, and H.-J. Schmid, “Surface roughness optimized alignment of parts for additive manufacturing processes,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1334–1344.
LibreCat | DOI
 
[53]
2015 | Conference Paper | LibreCat-ID: 22199
S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and material properties of laser sintered polyamide 12 using low refresh rates,” in Proceedings of the Rapid Tech 2015, 2015, pp. 63–78.
LibreCat | DOI
 
[52]
2015 | Conference Paper | LibreCat-ID: 23074
I. Koke, K. Dibblee, F. Hankeln, S. Seidel, A. Trächtler, and H.-J. Schmid, “Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen,” in 44. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik - Hochschuldidaktik im Dialog, Paderborn, 2015.
LibreCat
 
[51]
2014 | Journal Article | LibreCat-ID: 26125
S. Pieper, N. Kirchhoff, and H.-J. Schmid, “Absence of pressure sensitivity of apparent wall slip in pressure-driven flow of non-colloidal suspensions,” Rheologica Acta, pp. 69–75, 2014, doi: 10.1007/s00397-014-0815-x.
LibreCat | DOI
 
[50]
2014 | Journal Article | LibreCat-ID: 26126
S. Schiller and H.-J. Schmid, “Ultrafine Dust Filtration Using Precoat Materials Considering the Influence of Filter Media,” Chemical Engineering & Technology, pp. 1009–1020, 2014, doi: 10.1002/ceat.201300856.
LibreCat | DOI
 
[49]
2014 | Journal Article | LibreCat-ID: 26127
M. Dörmann and H.-J. Schmid, “Simulation of Capillary Bridges between Nanoscale Particles,” Langmuir, pp. 1055–1062, 2014, doi: 10.1021/la404409k.
LibreCat | DOI
 
[48]
2014 | Conference Paper | LibreCat-ID: 22176
P. Delfs, A. A. Herale, Z. Li, and H.-J. Schmid, “Simulation of the Surface Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
LibreCat | DOI
 
[47]
2014 | Conference Paper | LibreCat-ID: 22177
S. Josupeit and H.-J. Schmid, “Three-dimensional in-process temperature measurement of laser sintered part cakes,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 49–58.
LibreCat | DOI
 
[46]
2014 | Conference Paper | LibreCat-ID: 22184
S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, and H.-J. Schmid, “Thermal ageing of polyamide 12 used for polymer laser sintering - influence on part quality characteristics,” in 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014, vol. 72, no. 3, pp. 2383–2385.
LibreCat | DOI
 
[45]
2014 | Journal Article | LibreCat-ID: 22186
S. Rüsenberg, S. Josupeit, and H.-J. Schmid, “A method to characterize the quality of a polymer laser sintering process ,” Advances in Mechanical Engineering, vol. 6, pp. 1687–8140, 2014.
LibreCat | DOI
 
[44]
2014 | Conference Paper | LibreCat-ID: 22193
S. Josupeit, L. Ordia, and H.-J. Schmid, “Development of a Basic Model to Simulate the Laser Sintering Cooling Process,” in International Conference on Additive Technologies, 2014, vol. 5, pp. 222–227.
LibreCat | DOI
 
[43]
2014 | Conference Paper | LibreCat-ID: 22203
P. Delfs and H.-J. Schmid, “Simulation of the Surface Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
LibreCat | DOI
 
[42]
2013 | Journal Article | LibreCat-ID: 26129
J. Erler, S. Machunsky, P. Grimm, H.-J. Schmid, and U. A. Peuker, “Liquid–liquid phase transfer of magnetite nanoparticles — Evaluation of surfactants,” Powder Technology, vol. 247, pp. 265–269, 2013, doi: 10.1016/j.powtec.2012.09.047.
LibreCat | DOI
 
[41]
2013 | Journal Article | LibreCat-ID: 26130
S. Schiller and H.-J. Schmid, “Hocheffiziente Feinstaubabscheidung aus Kleinfeuerungsanlagen mit einem Schlauchfilter,” Chemie Ingenieur Technik, pp. 1324–1328, 2013, doi: 10.1002/cite.201200114.
LibreCat | DOI
 
[40]
2013 | Conference Paper | LibreCat-ID: 22175
S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “A material-based quality concept for polymer laser sintering,” in 24th Annual International Solid Freeform Fabrication Symposium , 2013, vol. 24, pp. 44–54.
LibreCat | DOI
 
[39]
2013 | Conference Paper | LibreCat-ID: 22192
S. Rüsenberg and H.-J. Schmid, “Advanced characterization method of Nylon 12 materials for application in laser sinter processing,” in International Conference of the Polymer-Processing-Society (PPS), 2013, vol. 29.
LibreCat | DOI
 
[38]
2013 | Conference Paper | LibreCat-ID: 22197
S. Josupeit, S. Rüsenberg, and H.-J. Schmid, “Mechanische und rheologische Untersuchungen neuer Laser Sinter Materialien,” in Merseburger Rapid Prototyping Forum, 2013, vol. 7.
LibreCat | DOI
 
[37]
2013 | Conference Paper | LibreCat-ID: 22201
S. Rüsenberg, A. Bagsik, J. Büsching, and H.-J. Schmid, “Additiv versus Konventionell: Benchmarking am Beispiel eines Designs aus der Luftfahrtindustrie,” in RapidTech, 2013.
LibreCat
 
[36]
2012 | Journal Article | LibreCat-ID: 26132
N. Kirchhoff, C. Schröder, D. Stute, E. Moritzer, and H.-J. Schmid, “Wood-Plastic-Composites: Rheologische Charakterisierung und Füllverhalten im Spritzgießprozess,” Chemie Ingenieur Technik, pp. 1584–1589, 2012, doi: 10.1002/cite.201100223.
LibreCat | DOI
 
[35]
2012 | Journal Article | LibreCat-ID: 26133
M. J. Kirchhof, H. Förster, H.-J. Schmid, and W. Peukert, “Sintering kinetics and mechanism of vitreous nanoparticles,” Journal of Aerosol Science, vol. 45, pp. 26–39, 2012, doi: 10.1016/j.jaerosci.2011.10.006.
LibreCat | DOI
 
[34]
2012 | Conference Paper | LibreCat-ID: 22174
S. Rüsenberg, R. Weiffen, F. Knoop, and H.-J. Schmid, “Controlling the Quality of Laser Sintered Parts Along the Process Chain,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 1024–1044.
LibreCat | DOI
 
[33]
2012 | Conference Paper | LibreCat-ID: 22204
S. Rüsenberg and H.-J. Schmid, “Mechanical Properties as a Result of multitude of Parameters,” in The European Forum on Additive Manufacturing, 2012, vol. 17.
LibreCat | DOI
 
[32]
2011 | Conference Paper | LibreCat-ID: 22188
S. Rüsenberg, L. Schmidt, and H.-J. Schmid, “Mechanical and Physical Properties - A Way to asses quality of Laser Sintered Parts,” in 22th Annual International Solid Freeform Fabrication Symposium, 2011, vol. 22, pp. 239–251.
LibreCat | DOI
 
[31]
2011 | Book | LibreCat-ID: 22191
S. Rüsenberg, L. Schmidt, H. Hosse, and H.-J. Schmid, Porosity as a key to increase material properties of laser sintered parts. 2011, pp. 531–538.
LibreCat | DOI
 
[30]
2010 | Journal Article | LibreCat-ID: 26134
R. Körmer, H.-J. Schmid, and W. Peukert, “Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 2: Theoretical analysis of the formation mechanism,” Journal of Aerosol Science, vol. 41, no. 11, pp. 1008–1019, 2010, doi: 10.1016/j.jaerosci.2010.08.002.
LibreCat | DOI
 
[29]
2010 | Journal Article | LibreCat-ID: 26135
R. Körmer, M. P. M. Jank, H. Ryssel, H.-J. Schmid, and W. Peukert, “Aerosol synthesis of silicon nanoparticles with narrow size distribution—Part 1: Experimental investigations,” Journal of Aerosol Science, vol. 41, no. 11, pp. 998–1007, 2010, doi: 10.1016/j.jaerosci.2010.05.007.
LibreCat | DOI
 
[28]
2010 | Journal Article | LibreCat-ID: 26136
M. Seipenbusch, S. Rothenbacher, M. Kirchhoff, H.-J. Schmid, G. Kasper, and A. P. Weber, “Interparticle forces in silica nanoparticle agglomerates,” Journal of Nanoparticle Research, vol. 12, no. 6, pp. 2037–2044, 2010, doi: 10.1007/s11051-009-9760-5.
LibreCat | DOI
 
[27]
2010 | Book Review | LibreCat-ID: 58272
J. Woppowa and H.-J. Schmid, “Gastfreundschaft. Ein Modell für den konfessionellen Religionsunterricht der Zukunft,” rhs, vol. 54, no. 2011. München, pp. 139–140, 2010.
LibreCat
 
[26]
2009 | Journal Article | LibreCat-ID: 26137
V. Vassilev, M. Gröschel, H.-J. Schmid, W. Peukert, and G. Leugering, “Interfacial energy estimation in a precipitation reaction using the flatness based control of the moment trajectories,” Chemical Engineering Science, vol. 65, no. 6, pp. 2183–2189, 2009, doi: 10.1016/j.ces.2009.12.014.
LibreCat | DOI
 
[25]
2009 | Journal Article | LibreCat-ID: 26138
B. Al Zaitone, H.-J. Schmid, and W. Peukert, “Simulation of structure and mobility of aggregates formed by simultaneous coagulation, sintering and surface growth,” Journal of Aerosol Science, vol. 40, no. 11, pp. 950–964, 2009, doi: 10.1016/j.jaerosci.2009.08.007.
LibreCat | DOI
 
[24]
2009 | Journal Article | LibreCat-ID: 26139
S. Machunsky, P. Grimm, H.-J. Schmid, and U. A. Peuker, “Liquid–liquid phase transfer of magnetite nanoparticles,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 348, no. 1–3, pp. 186–190, 2009, doi: 10.1016/j.colsurfa.2009.07.014.
LibreCat | DOI
 
[23]
2009 | Journal Article | LibreCat-ID: 26140
M. J. Kirchhof, H.-J. Schmid, and W. Peukert, “Three-dimensional simulation of viscous-flow agglomerate sintering,” Physical Review E, vol. 80, no. 2, p. 026319, 2009, doi: 10.1103/physreve.80.026319.
LibreCat | DOI
 
[22]
2008 | Journal Article | LibreCat-ID: 26142
M. Horn and H.-J. Schmid, “A comprehensive approach in modeling Lagrangian particle deposition in turbulent boundary layers,” Powder Technology, vol. 186, no. 3, pp. 189–198, 2008, doi: 10.1016/j.powtec.2007.11.048.
LibreCat | DOI
 
[21]
2007 | Journal Article | LibreCat-ID: 26147
L. Schneider, H.-J. Schmid, and W. Peukert, “Influence of particle size and concentration on the second-harmonic signal generated at colloidal surfaces,” Applied Physics B, vol. 87, pp. 333–339, 2007, doi: 10.1007/s00340-007-2597-7.
LibreCat | DOI
 
[20]
2007 | Journal Article | LibreCat-ID: 29827
H.-J. Schmid, “Neuer Ansatz zur Modellierung der Abscheidung in einem modifizierten Rohrelektrofilter,” Gefahrstoffe, Reinhaltung der Luft. Air Quality Control, vol. 67, no. 4, 2007.
LibreCat
 
[19]
2006 | Journal Article | LibreCat-ID: 26145
C. Binder, C. Feichtinger, H.-J. Schmid, N. Thürey, W. Peukert, and U. Rüde, “Simulation of the hydrodynamic drag of aggregated particles,” Journal of Colloid and Interface Science, vol. 301, no. 1, pp. 155–167, 2006, doi: 10.1016/j.jcis.2006.04.045.
LibreCat | DOI
 
[18]
2006 | Journal Article | LibreCat-ID: 26148
M. Horn and H.-J. Schmid, “Modellierung der wandnahen Bereiche in turbulenten Zweiphasenströmungen,” Chemie Ingenieur Technik, vol. 78, no. 6, pp. 694–699, 2006, doi: 10.1002/cite.200500110.
LibreCat | DOI
 
[17]
2006 | Journal Article | LibreCat-ID: 26150
C. Artelt, H.-J. Schmid, and W. Peukert, “Modelling titania formation at typical industrial process conditions: effect of surface shielding and surface energy on relevant growth mechanisms,” Chemical Engineering Science, vol. 61, no. 1, pp. 18–32, 2006, doi: 10.1016/j.ces.2004.12.053.
LibreCat | DOI
 
[16]
2005 | Journal Article | LibreCat-ID: 26149
H.-C. Schwarzer, F. Schwertfirm, M. Manhart, H.-J. Schmid, and W. Peukert, “Predictive simulation of nanoparticle precipitation based on the population balance equation,” Chemical Engineering Science, vol. 61, no. 1, pp. 167–181, 2005, doi: 10.1016/j.ces.2004.11.064.
LibreCat | DOI
 
[15]
2005 | Journal Article | LibreCat-ID: 26151
H.-J. Schmid, B. Al-Zaitone, C. Artelt, and W. Peukert, “Evolution of the fractal dimension for simultaneous coagulation and sintering,” Chemical Engineering Science, vol. 61, no. 1, pp. 293–305, 2005, doi: 10.1016/j.ces.2004.11.068.
LibreCat | DOI
 
[14]
2005 | Journal Article | LibreCat-ID: 26153
C. Artelt, H.-J. Schmid, and W. Peukert, “On the impact of accessible surface and surface energy on particle formation and growth from the vapour phase,” Journal of Aerosol Science, vol. 36, no. 2, pp. 147–172, 2005, doi: 10.1016/j.jaerosci.2004.08.003.
LibreCat | DOI
 
[13]
2004 | Journal Article | LibreCat-ID: 26152
H.-J. Schmid, S. Tejwani, C. Artelt, and W. Peukert, “Monte Carlo simulation of aggregate morphology for simultaneous coagulation and sintering,” Journal of Nanoparticle Research, vol. 6, no. 6, pp. 613–626, 2004, doi: 10.1007/s11051-004-2161-x.
LibreCat | DOI
 
[12]
2004 | Journal Article | LibreCat-ID: 26154
M. J. Kirchhof, H.-J. Schmid, and W. Peukert, “Reactor system for the study of high-temperature short-time sintering of nanoparticles,” Review of Scientific Instruments, vol. 75, no. 11, pp. 4833–4840, 2004, doi: 10.1063/1.1809258.
LibreCat | DOI
 
[11]
2004 | Journal Article | LibreCat-ID: 26155
A. Messerer, H.-J. Schmid, C. Knab, U. Pöschl, and R. Nießner, “Erhöhung der Abscheidung ultrafeiner Dieselrußpartikeln durch Mikrokugelbeschichtung auf metallträgerbasierten Katalysatorstrukturen,” Chemie Ingenieur Technik, vol. 76, no. 8, pp. 1092–1096, 2004, doi: 10.1002/cite.200403418.
LibreCat | DOI
 
[10]
2003 | Journal Article | LibreCat-ID: 26156
H.-J. Schmid and L. Vogel, “On the modelling of the particle dynamics in electro-hydrodynamic flow-fields: I. Comparison of Eulerian and Lagrangian modelling approach,” Powder Technology, vol. 135/136, pp. 118–135, 2003, doi: 10.1016/j.powtec.2003.08.009.
LibreCat | DOI
 
[9]
2003 | Journal Article | LibreCat-ID: 26157
H.-J. Schmid, “On the modelling of the particle dynamics in electro-hydrodynamic flow fields: II. Influences of inhomogeneities on electrostatic precipitation,” Powder Technology, vol. 135/136, pp. 136–149, 2003, doi: 10.1016/j.powtec.2003.08.010.
LibreCat | DOI
 
[8]
2003 | Journal Article | LibreCat-ID: 26158
W. Peukert and H.-J. Schmid, “Herausforderungen für die Lehre am Beispiel der mechanischen Verfahrenstechnik,” Chemie Ingenieur Technik, vol. 75, no. 3, pp. 177–183, 2003, doi: 10.1002/cite.200390035.
LibreCat | DOI
 
[7]
2003 | Journal Article | LibreCat-ID: 26159
C. Artelt, H.-J. Schmid, and W. Peukert, “On the relevance of accounting for the evolution of the fractal dimension in aerosol process simulations,” Journal of Aerosol Science, vol. 34, no. 5, pp. 511–534, 2003, doi: 10.1016/s0021-8502(03)00005-3.
LibreCat | DOI
 
[6]
2002 | Journal Article | LibreCat-ID: 26160
A. Schiel, A. P. Weber, G. Kasper, and H.-J. Schmid, “In-Situ Determination of the Charging of Nanometer and Submicron Particles at High Temperatures,” Particle & Particle Systems Characterization, vol. 19, no. 6, pp. 410–418, 2002, doi: 10.1002/ppsc.200290004.
LibreCat | DOI
 
[5]
2002 | Journal Article | LibreCat-ID: 26161
H.-J. Schmid, S. Veith, and H. Umhauer, “In-Situ Measurement of Local Particle Flux Densities in a Complex Two-Phase Flow,” Particle & Particle Systems Characterization, vol. 19, no. 3, Art. no. 203, 2002, doi: 10.1002/1521-4117(200207)19:3<203::aid-ppsc203>3.0.co;2-7.
LibreCat | DOI
 
[4]
2002 | Book Chapter | LibreCat-ID: 26169
H.-J. Schmid, “Trennprozesse: Abschnitt 7.5.3,” in Handbuch der Mechanischen Verfahrenstechnik, 2002.
LibreCat | DOI
 
[3]
2002 | Journal Article | LibreCat-ID: 29826
H.-J. Schmid and W. Peukert, “Novel Concepts for Teaching Particle Technology ,” chemical engineering education, vol. 36, no. 4, 2002.
LibreCat | Download (ext.)
 
[2]
2002 | Journal Article | LibreCat-ID: 29484
H.-J. Schmid, “On the Modelling of the Electro-Hydrodynamic Flow Field in Electrostatic Precipitators,” Flow, Turbulence and Combustion, vol. 68, pp. 63–89, 2002, doi: 10.1023/A:1015666116174.
LibreCat | DOI
 
[1]
1998 | Dissertation | LibreCat-ID: 29825
H.-J. Schmid, Zum Partikeltransport in Elektrischen Abscheidern. Shaker Verlag, 1998.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed