252 Publications
2023 | Conference Paper | LibreCat-ID: 48672
Schöppner, Volker, Karina Gevers, L. Schraa, P. Töws, K. Uhlig, M. Stommel, and J. Decker. “Evaluation of the Effects of Different Heating Strategies on the Joining Partners during Infrared Welding of Black Polyamides.” Singapur (Singapur), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48671
Schöppner, Volker, Karina Gevers, L. Schraa, K. Uhlig, P. Töws, J. Decker, and M. Stommel. “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation.” Proceedings of the 2023 International Conference on Composite Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48665
Schöppner, Volker, and Theresa Arndt. “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten.” Joining Plastics, no. 17 (2023): 20–27.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48662
Schöppner, Volker, and J. Petzke. “Dielectric Heating in the Vulcanization Process of Rubber Extrudates.” Denver, CO (USA), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48751
Schöppner, Volker, Karina Gevers, N. Hoenen, K. Uhlig, P. Töws, J. Decker, and M. Stommel. “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts Based on Mori-Tanaka Homogenization Method.” Advanced Structured Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48754
Schöppner, Volker, Laura Austermeier, and Dorte Trienens. “Verbesserung der Betriebspunktauslegung durch Schneckensimulation.” Wissenschaftlicher Arbeitskreis Kunststofftechnik, 2023, 62–66.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48748
Köllermeier, Jonas, and Volker Schöppner. “Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data.” Ilmenau (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48749
Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.” Joining Plastics, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48753
Schöppner, Volker, Maximilian Frank, and Christoph Wilhelm Theodor Schall. “The Wave Must Be Right.” Plastic Insights, no. 7/2023 (2023): 52–54.
LibreCat
2023 | Book Chapter | LibreCat-ID: 48649
Gevers, Karina, P. Töws, L. Schraa, J. Decker, Volker Schöppner, K. Uhlig, and M. Stommel. “Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten.” In 11. Landshuter Leichtbau-Colloquium, 1st ed., 8–17. Landshut: LC-Verlag, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48651
Schöppner, Volker, Laura Austermeier, and A. Nordieker. “A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION.” Denver, CO (USA), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48660
Schöppner, Volker, Laura Austermeier, and A. Alsoud. “Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder.” St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48652
Schöppner, Volker, Karina Gevers, L. Schraa, P. Töws, K. Uhlig, M. Stommel, and J. Decker. “Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide.” Joining Plastics, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48661
Schöppner, Volker, and J. Petzke. “Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren.” Gummersbach (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48738
Schöppner, Volker, and Dorte Trienens. “Investigation of the Influence of Screw Geometry on the Resulting Melt Quality for Cast Film Extrusion.” St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48735
Schöppner, Volker, Maximilian Frank, and Christoph Wilhelm Theodor Schall. “Hauptsache, die Wellenlänge stimmt.” Kunststoffe, no. 9/2023 (2023): 76–78.
LibreCat
2023 | Journal Article | LibreCat-ID: 48746
Schöppner, Volker, Dennis Kleinschmidt, C. Hopmann, C. Wiesel, U. Nillius, M. Schön, and A. Limper. “Optimisation of the Simulation of Rubber Extrusion Dies by Means of the Integration of Empirically Determined Characteristic Maps.” KGK Kautschuk Gummi Kunststoffe, 2023, 47–52.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48745
Schöppner, Volker, Karina Gevers, M. Albrecht, and A. Seefried. “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen.” Chemnitz (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48744
Petzke, J., Dennis Kleinschmidt, and Volker Schöppner. “Microwave Heating of Rubber Extrudates.” St. Gallen (Schweiz), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48740
Schöppner, Volker, and Dorte Trienens. “Investigation Regarding the Correlation of the Relative Influences during the Extrusion Process of Cast Films on the Residual Melt Quality.” Ilmenau, 2023. https://doi.org/10.22032/dbt.58867.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48743
Schöppner, Volker, Matthias Altepeter, Christoph Wilhelm Theodor Schall, Sven Wanke, and Marina Kley. “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder.” Polymers, 2023, 10.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49740
Stüker, Daniel, and Volker Schöppner. “An Approach for the Numerical Calculation of the Non-Isothermal Pressure-Throughput-Characteristics of Single Screw Melt-Extruder.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0138944.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49737
Malatyali, Hatice, Volker Schöppner, and Theresa Hoemann. “Investigation of the Influence of Process and Screw Configurations on Fiber Length for Recycled Carbon Fiber.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0139631.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49734
Malatyali, Hatice, and Volker Schöppner. “Investigation of Shear Rates in Twin-Screw Extruder Using CFD-Simulation.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0139630.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52800
Stüker, Daniel, and Volker Schöppner. “Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruder.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0138943.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 31733
Schöppner, Volker, and Florian Brüning. “Calibration of a Contact Model for DEM Simulations of Grooved Feed Sections of Single Screw Extruders.” In 36th International Conference of the Polymer Processing Society (PPS-36). Montreal (Kanada), 2023. https://doi.org/10.1063/5.0135858.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34748
Vogtschmidt, Sascha, and Volker Schöppner. “The Short-and Long-Term Properties of Welded High-Temperature-Resistant Thermoplastics,” 2023. https://doi.org/10.1007/s40194-023-01595-3.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52801
Altepeter, Matthias, Sven Wanke, and Volker Schöppner. “Analysis and Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0135824.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48750
Schöppner, Volker, Matthias Altepeter, Laura Austermeier, Sven Wanke, and Philipp Meinheit. “Polypropylene Degradation on Co-Rotating Twin-Screw Extruders.” Polymers 2023, no. 15(9) (2023): 2181. https://doi.org/10.3390/polym15092181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34736
Schöppner, Volker, and Maximilian Frank. “Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as Well as Pressure Throughput Behavior,” 2023. https://doi.org/10.1063/5.0135825.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 29946
Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Design of a Test Bench for Measuring the Degradation Behavior of Plastics during Processing.” In PPS36, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48742
Schöppner, Volker, and Christoph Wilhelm Theodor Schall. “Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior.” Materials, no. 16(17) (2023): 5891. https://doi.org/10.3390/ma16175891.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48659
Trienens, Dorte, Volker Schöppner, and Robin Bunse. “Determination of Correlations between Melt Quality and the Screw Performance Index in the Extrusion Process.” Polymers 2023, 2023. https://doi.org/10.3390/polym15163427.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48737
Schöppner, Volker, and Dennis Kleinschmidt. “Improvement of a Method for the Correction of Wall Slip Effects within the Rheological Measurements of Filled Rubber Compounds.” SPE Polymers, 2023, 1–17.
LibreCat
2023 | Journal Article | LibreCat-ID: 52833
Schöppner, Volker, Laura Austermeier, Florian Brüning, Jan Philipp Oldemeier, and O. Brandt. “Recycling-Ansatz für mehrkomponentige Kunststoffprodukte durch thermische Verbundtrennung.” EXTRUSION, no. 8/2023 (2023): 56–59.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52840
Schöppner, Volker, and Theresa Arndt. “Anvil-Free Ultrasonic Welding for Welding Situations with One Sided Access.” In 76th Annual Assembly of the International Institute of Welding (IIW). Singapur , 2023.
LibreCat
2022 | Journal Article | LibreCat-ID: 29947
Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Measurement of Material Degradation in Dependence of Shear Rate, Temperature, and Residence Time.” Polymer Engineering and Science 62, no. 3 (2022): 815–23. https://doi.org/10.1002/pen.25887.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 34723
Schöppner, Volker, Karina Gevers, L. Schraa, and P. Töws. “Auswirkungen Unterschiedlicher Erwärmstrategien Auf Die Quasistatische Und Zyklische Belastbarkeit von Infrarotgeschweißten, Glasfaserverstärkten Thermoplastbauteilen.” Joining Plastics, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34717
Schöppner, Volker, Florian Brüning, and L. Sommer. “A Reverse Engineering Approach for Calibrating Frictional Behavior of Contact Models for Numerical Simulation of Solids Conveying in Extruders,” 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34722
Schöppner, Volker, Dennis Kleinschmidt, U. Nillius, and C. Hopmann. “Auswirkungen Des Vorscherungseinflusses Im Extrusionsprozess Auf Die Rheologischen Kennwerte Gefüllter Kautschukmischungen.” GAK, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34721
Schöppner, Volker, Marius Dörner, Maximilian Frank, and Christoph Wilhelm Theodor Schall. “Auf Der Welle Zum Mischerfolg.” Kunststoffe, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34730
Schöppner, Volker, and Dennis Kleinschmidt. “Estimation and Correction of Non-Isothermal Effects of Carbon Black-Filled Rubber Compounds in Viscosity Measurements,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34738
Schöppner, Volker, Dennis Kleinschmidt, C. Hopmann, A. Limper, F. Fey, M. Facklam, and M. Schön. “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34735
Schöppner, Volker, and Florian Brüning. “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34734
Schöppner, Volker, and Jonas Köllermeier. “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34737
Schöppner, Volker, and Maximilian Frank. “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34740
Schöppner, Volker, Matthias Altepeter, and S. Wanke. “Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder,” 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34752
Schöppner, Volker, Dennis Kleinschmidt, U. Nillius, and C. Hopmann. “Weiterentwicklung Eines Verfahrens Zur Korrektur von Wandgleiteffekten Im Rahmen Rheologischer Messungen an Gefüllten Kautschukmischungen.” GAK, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33090
Gevers, Karina, Alexander Tornede, Marcel Dominik Wever, Volker Schöppner, and Eyke Hüllermeier. “A Comparison of Heuristic, Statistical, and Machine Learning Methods for Heated Tool Butt Welding of Two Different Materials.” Welding in the World, 2022. https://doi.org/10.1007/s40194-022-01339-9.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34727
Schöppner, Volker, Jonas Köllermeier, G. Hiesgen, and J. Trippe. “Development of Simulation Based Assistant Systems for Automatic Process Monitoring and Derivation of Recommendations to Optimize a Profile Extrusion Line,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34720
Schöppner, Volker, and Jonas Köllermeier. “Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34726
Schöppner, Volker, and Jonas Köllermeier. “Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles,” 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 29948
Brüning, Florian, and Volker Schöppner. “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders.” Polymers 14, 2022. https://doi.org/10.3390/polym14020256.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34708
Schöppner, Volker, Karina Gevers, A. Tornede, M. Wever, and E. Hüllermeier. “A Comparison of Heuristic, Statistical, and Machine Learning Methods for Heated Tool Butt Welding of Two Different Materials.” Welding in the World, 2022, 14.
LibreCat
2022 | Book | LibreCat-ID: 48356
Schöppner, Volker, and Sascha Vogtschmidt. Schweißnahtkennwerte Für Die Lebensdaueroptimierte Bauteilauslegung von Hochtemperaturbeständigen Thermoplasten. Koblenz, 2022.
LibreCat
2022 | Book | LibreCat-ID: 48358
Schöppner, Volker, M. Dörner, Maximilian Frank, and Christoph Schall. On the Wave to Successful Mixing, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
Rüppel, Annette, Susanne Wolff, Jan Philipp Oldemeier, Volker Schöppner, and Hans-Peter Heim. “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution.” Polymers 14, no. 15 (2022). https://doi.org/10.3390/polym14153113.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 24372
Gevers, Karina, and Volker Schöppner. “Lebensdauer vorhersagen?” K-Zeitung, n.d.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
Gevers, Karina, Volker Schöppner, and Eyke Hüllermeier. “Heated Tool Butt Welding of Two Different Materials – Established Methods versus Artificial Intelligence,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
Arndt, Theresa, and Volker Schöppner. “Development of Scale up Rules for Quasi-Simultaneous Laser Transmission Welding of Thermoplastics,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24441
Frank, Maximilian, and Volker Schöppner. “DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION.” In ANTEC® 2021, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26630
Altepeter, Matthias, Volker Schöppner, and Sven Wanke. “Analysis and Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23839
Marschik, Christian, Wolfgang Roland, Marius Döner, Georg Steinbichler, and Volker Schöppner. “A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion.” Polymers, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23867
Bialaschik, Max, Volker Schöppner, Mirko Albrecht, and Michael Gehde. “Influence of Material Degradation on Weld Seam Quality in Hot Gas Butt Welding of Polyamides.” Welding in the World, 2021, 1161–69. https://doi.org/10.1007/s40194-021-01108-0.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 31758
Schöppner, Volker, and Jan Hendrik Martens. “Eine Runde Sache.” Kunststoffe, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31776
Schöppner, Volker, and Karina Gevers. “ Lebensdauer Vorhersagen?” K-Zeitung, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31777
Schöppner, Volker, Matthias Altepeter, and Sven Wanke. “Material Degradation of Polypropylene on the Co-Rotating Twin Screw Extruder.” In 36th International Conference of the Polymer Processing Society (PPS). Melbourne (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31782
Schöppner, Volker, and Dennis Kleinschmidt. “Viskoelastische Materialmodellierung in Strömungssimulationen.” In 27. Techomer - Fachtagung Über Verarbeitung Und Anwendung von Polymeren. Chemnitz (Online) , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31785
Schöppner, Volker, M. Albrecht, M. Gehde, and Max Oliver Bialaschik. “Warmgasstumpfschweißen - Einfluss Des Werkzeugdesigns Und Des Verwendeten Prozessgases Auf Das Erwärm- Und Schweißverhalten.” In Technomer. Chemnitz (Deutschland), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31784
Schöppner, Volker, M. Dörner, and Christoph Wilhelm Theodor Schall. “Vorteilhaftes Prozessverhalten von Wave-Schnecken in Der Einschneckenextrusion.” In Technomer 2021. Chemnitz, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31786
Schöppner, Volker, Max Oliver Bialaschik, M. Albrecht, and M. Gehde. “Warmgasstumpfschweißen von Kunststoffen.” Joining Plastics, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31719
Schöppner, Volker, and Sascha Vogtschmidt. “ Analyse Des Erwärm- Und Umstellverhaltens Beim Schweißen von Hochtemperaturbeständigen Kunststoffen.” In DVS CONGRESS. Deutschland (digital), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31730
Schöppner, Volker, and Sascha Vogtschmidt. “ Anwendungsorientiertes Schweißen von Hochtemperaturbeständigen Kunststoffen.” In Technomer. Deutschland (digital), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31750
Köllermeier, Jonas, and Volker Schöppner. “Development of a Dynamic Strategy to Determine the Optimal Barrel Temperature of Single Screw Extruders.” In 36th International Conference of the Polymer Processing Society (PPS). Montreal (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23835
Dörner, Marius, and Volker Schöppner. “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts.” In ANTEC 21, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24383
Wübbeke, Andrea, Volker Schöppner, Theresa Arndt, Jan-Ole Maras, Marcus Fitze, Christian Moltzahn, Tao Wu, and Thomas Niendorf. “Effect of Nucleating Additives on Short- and Long-Term Tensile Strength and Residual Stresses of Welded Polypropylene Samples .” Polymers, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24442
Frank, Maximilian, Viola Hollenhorst, and Volker Schöppner. “Investigation of the Pressure-Throughput Behavior of Different Faceted Mixer Geometries on an Analytical and Simulative Basis .” In 36th International Conference of the Polymer Processing - PPS 2021, 2021.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24133
Schöppner, Volker, Laura Austermeier, and Kilian Dietl. “Der richtige Dreh für Simulationen.” Blasformen & Extrusionswerkzeuge, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24134
Schöppner, Volker, Laura Austermeier, and Kilian Dietl. “SKZ simuliert Doppelschnecke.” K Zeitung, 2020.
LibreCat
2020 | Misc | LibreCat-ID: 24204
Schöppner, Volker, M. Dörner, and C. Marschik. ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24207
Schöppner, Volker, M. Dörner, C. Marschik, W. Roland, S. Schaufler, and G. Steinbichler. “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion).” Polymers, no. 12(9) (2020): 1900.
LibreCat
2020 | Journal Article | LibreCat-ID: 24231
Schöppner, Volker, M. Dörner, C. Marschik, and G. Steinbichler. “Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws.” Polymers, 2020, 946.
LibreCat
2020 | Journal Article | LibreCat-ID: 24312
Vogtschmidt, Sascha, Isabel Fiebig, and Volker Schöppner. “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien.” Joining Plastics, no. 3–4 (2020).
LibreCat
2020 | Conference Paper | LibreCat-ID: 24318
Vogtschmidt, Sascha, and Volker Schöppner. “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien.” In DVS CONGRESS 2020 - Große Schweißtechnische Tagung, Vol. 365, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24321
Vogtschmidt, Sascha, and Volker Schöppner. “Vibration Welding of Components with Angled Areas in the Direction of Vibration.” Welding in the World 64 (2020): 1843–53.
LibreCat
2020 | Journal Article | LibreCat-ID: 24324
Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.” Joining Plastics, no. 3–4 (2020).
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24385
Arndt, Theresa, and Volker Schöppner. “Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln Für Das Quasisimultane Laserdurchstrahlschweißen von Thermoplasten.” Joining Plastics, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24386
Arndt, Theresa, and Volker Schöppner. “Wenn Regeln Potenziale Freisetzen.” K-Zeitung, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24387
Arndt, Theresa, and Volker Schöppner. “Quasi-Simultaneous Laser Transmission Welding.” PhotonicsViews, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24471
Schöppner, Volker, and Max Bialaschik. “Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides.” In 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23861
Altepeter, Matthias, and Volker Schöppner. “Materialabbau Im Doppelschneckenextruder.” Kunststoffe, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23865
Schöppner, Volker, and Florian Brüning. “Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders Based on Discrete Element Simulations.” In Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, edited by Christian Hopmann and Rainer Dahlmann. Springer, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23868
Albrecht, Mirko, Max Bialaschik, Michael Gehde, and Volker Schöppner. “Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden.” DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365 (2020).
LibreCat
2020 | Conference Paper | LibreCat-ID: 23873
Albrecht, Mirko, Max Bialaschik, Michael Gehde, and Volker Schöppner. “Hot Gas Welding – Influences of the Tool Design,” 2020. https://doi.org/10.1063/5.0029478.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 24245
Schöppner, Volker, Andrea Wübbeke, B. Geißler, M. Schmidt, A. Maginer, T. Wu, T. Niendorf, F. Jakob, and H. Heim. “Investigation of Residual Stresses of Hot Plate Welding.” In 73rd Annual Assembly of the International Institute of Welding (IIW). Marina Bay (Singapore): Springer-Verlag, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24236
Schöppner, Volker, Andrea Wübbeke, Fabian Schriegel, Andrej Paul, Michael Tiemann, Bastian Geißler, Michael Schmidt, Arnaud Magnier, and Thomas Niendorf. “Selected Aspects for the Assessment of Laser Transmission Welding.” Joining Plastics, 2020, 30–35.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24472
Schöppner, Volker, Andrea Wübbeke, A. Paul, M. Tiemann, Laura Austermeier, M. Fitze, M. Chen, et al. “LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS.” In ANTEC20, 2020.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25617
Schöppner, Volker, and F. Sporkmann. “Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation.” In 35th International Conference of the Polymer Processing Society (PPS). Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25622
Schöppner, Volker, and M. Dörner. “COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS.” In 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25623
Schöppner, Volker, and V. Resonnek. “DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC.” In 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Detroit (USA), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25627
Schöppner, Volker, and K. Westhues. Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern. Technomer . Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25628
Schöppner, Volker, and J. Walter. “Entwicklung von Scale-Up Regeln Für Kaltgefütterte Kautschukstiftextruder Teil 1.” GAK-Gummi Fasern Kunststoffe, 2019, S. 152-159.
LibreCat
2019 | Journal Article | LibreCat-ID: 25629
Schöppner, Volker, and J. Walter. “Entwicklung von Scale-Up Regeln Für Kaltgefütterte Kautschukstiftextruder Teil 2.” GAK Gummi Faser Kunststoffe, 2019, 206–13.
LibreCat
2019 | Journal Article | LibreCat-ID: 25633
Schöppner, Volker, and V. Resonnek. “Extruder Optimier Dich!” Kunstsstoffe, 2019, 56–61.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25634
Schöppner, Volker. “Grundlagen Der Haftung in Der Grenzfläche Beim Kunststoffschweißprozess.” In VDI Wissensforum - Schweißen von Kunststoffen. Paderborn (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 24326
Vogtschmidt, Sascha, and Volker Schöppner. “Vibration Welding of Components with Angled Areas in the Direction of Vibration.” Bratislava, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25736
Schöppner, Volker, H. Bayazian, and Ali Yadegari. “Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters.” In 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25737
Schöppner, Volker, F. Sporkmann, and Alexander Heide. “New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method.” In 35th International Conference of the Polymer Processing Society (PPS). Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25746
Schöppner, Volker, H. Bayazian, Ali Yadegari, and Hoda Haddad. “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters.” In 35th PPS. Cesme-Izmir (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25750
Schöppner, Volker, and F. Sporkmann. “Scale up von Doppelschneckenmaschinen.” In VDI Wissensforum. Stuttgart (Deutschland), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25751
Schöppner, Volker, P. Meilwes, and K. Westhues. Schmelzefilter. Technomer . Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25753
Schöppner, Volker, and F. Sporkmann. “Simulation Aids Compounding Success.” Compounding World, 2019, 47–56.
LibreCat
2019 | Journal Article | LibreCat-ID: 25754
Schöppner, Volker, and Florian Brüning. “Simulation Der Feststoffförderung Im Einschneckenextruder.” WAK Jahresmagazin, 2019, 64–67.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25759
Schöppner, Volker, and K. Westhues. “Vortrag „Aufschmelzen“ Optimierter Betrieb Und Scale-up von Doppelschnecken-Extrudern.” In VDI Wissensforum. Stuttgart (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 23866
Schöppner, Volker, and Florian Brüning. “Simulation Der Feststoffförderung Im Einzug von Einschneckenextrudern.” WAK Jahresmagazin, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 23879
Albrecht, Mirko, Michael Gehde, Max Bialaschik, and Volker Schöppner. “Einfluss Des Werkzeugdesignes Auf Das Erwärmverhalten Beim Warmgasschweißen,” 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22027
Schöppner, Volker, C. Schumacher, and C. Fels. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.” In AIP Conference Proceedings. AIP Publishing, 2019. https://doi.org/10.1063/1.5088315.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 25619
Schöppner, Volker, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, and G. Steinbichler. “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).” Polymers, 2019, 1488–1515.
LibreCat
2019 | Conference Paper | LibreCat-ID: 44308
Bayazian, Hoda, Volker Schöppner, Ali Yadegari , and Hoda Haddad . “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25641
Schöppner, Volker, Andrea Wübbeke, Andre Paul, Michael Tiemann, F. Fitze, Laura Austermeier, M. Chen, et al. “Langzeitfestigkeit von Schweißungen Aus PP Unter Berücksichtigung Der Morphologie.” In Werkstoffwoche (2019). Dresden (Deutschland), 2019.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26929
Schöppner, Volker, Christian Schumacher, and Camilla Fels. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.” In 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26934
Schöppner, Volker, F. Sporkmann, and J. Markarian. “Building the Perfect Model.” Compounding World, no. Onlineausgabe März (2018): 31–40.
LibreCat
2018 | Journal Article | LibreCat-ID: 26935
Schöppner, Volker, and P. Meilwes. “CAD-Datenerzeugung Zur Druckverlustsimulation von Filtermedien.” Konstruktion 70. Jg. Heft 11 (2018).
LibreCat
2018 | Conference Paper | LibreCat-ID: 26940
Schöppner, Volker, and K. Westhues. “Differenzierte Betrachtung Der Energieeinträge in Feststoffförder- Und Aufschmelzzone Gleichläufiger Doppelschneckenextruder,” 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26944
Schöppner, Volker, H. Bayazian, A. Yadgari, J. Morshedian, A. Jamshidi, and M. Razavi-Nouri. “Evaluation of Morphology and Crystallinity of Biaxially Oriented PP Films.” In 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26945
Schöppner, Volker, and I. Fiebig. “Evaluation of the Elongation Ability of Polymer Melts for the Extension of the Design Freedom in Vibration Welding.” In 71st Annual Assembly of the International Institute of Welding (IIW), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26947
Schöppner, Volker, and J. Fiebig. “Factors Influencing the Fiber Orientation in Welding of Fiber-Reinforced Thermoplastics.” Welding in the World 62. Jg., no. Heft 5 (2018): 997–1012.
LibreCat
2018 | Journal Article | LibreCat-ID: 26950
Schöppner, Volker, and I. Fiebig. “Influence of Fiber Orientation and Weld Position in Welding Injection-Molded Fiber-Reinforced Thermoplastics.” Welding in the World 62, no. 6 (2018): 1301–9.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26952
Schöppner, Volker, and H. Bayazian. “Investigation of Molecular Weight Distributions during Extrusion Process of Polypropylene by Rheometry Experiment.” In 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26955
Schöppner, Volker, C. Schumacher, and C. Fels. “Materialentwicklung für FLM.” In WAK-Symposium, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26956
Schöppner, Volker, C. Schumacher, and C. Fels. “Materialschwindung und Verzug im FDM-Prozess.” In DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26957
Schöppner, Volker, and J. Trippe. “Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds.” International Polymer Processing 33, no. 4 (2018).
LibreCat
2018 | Conference Paper | LibreCat-ID: 26958
Schöppner, Volker, and J. Trippe. “Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders.” In 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26959
Schöppner, Volker, and P. Meilwes. “Modelling the Contamination Behavior of Polymer Melt Filters and Pressure Loss Simulations of Filtration Media.” In 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26960
Schöppner, Volker, H. Bayazian, Matthias Hopp, and A. Yadegari. “Molecular Weight Distribution Prediction of Rheology against Gel Permeation Chromatography for Film Grade Polypropylene.” In 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26962
Schöppner, Volker, and F. Sporkmann. “New Method to Analyze the Throughput-Pressure Behavior with the Corrected Twin Screw Channel Geometry and the Induced Drag Flow of Screw Elements by Using 3D FEM Simulation.” In 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26964
Schöppner, Volker, C. Schumacher, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” In 29th Annual International Solid Freeform Fabrication Symposium (SFF) - An Additive Manufacturing Conference, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26965
Schöppner, Volker, and J. Walter. “Scale-Up of Garvey-Die Test Setup.” In 13. Kautschuk-Herbst-Kolloquium (KHK), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26966
Schöppner, Volker, and J. Walter. “Scale-Up Regeln für Kautschukstiftextruder, Ansätze auf Basis einer konstanten Mischgüte.” In Deutsche Kautschuk-Tagung (DKT 2018), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26967
Schöppner, Volker, and I. Fiebig. “Schweißnahtfestigkeit von Sandwichbauteilen mit einer glasfaserverstärkten Kernkomponente.” Joining Plastics 12, no. 2 (2018): 87–93.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26968
Schöppner, Volker, and V. Resonnek. “Self-Optimizing Barrel Temperature Setting Control of Single Screw Extruders for Improving the Melt Quality.” In 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22020
Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., M. Köhler, Tobias Lieneke, Detmar Zimmer, and Volker Schöppner. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018): 83–88.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
Knoop, F., Tobias Lieneke, Volker Schöppner, and Detmar Zimmer. “Additive Fertigung Nach Maß.” Kunststoffe 6 (2018): 70–73. https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22046
Knoop, F., and Volker Schöppner. “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process.” In SPE ANTEC 2018, Vol. 1. Society of Plastics Engineers , 2018. https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 26954
Schöppner, Volker, Michael Schadomsky, and Daniel Stüker. “Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity.” In Deutsche Kautschuk-Tagung (DKT 2018), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26932
Schöppner, Volker, Patrick Lakemeyer, Bastian Geißler, Tobias Laumer, Andrea Wübbeke, and Thomas Frick. “Analysis of the Interaction between the Temperature Field and the Weld Seam Morphology in Laser Transmission Welding by Using Two Different Discrete Laser Wavelengths.” Journal of Laser Applications 30. Jg. (2018).
LibreCat
2018 | Journal Article | LibreCat-ID: 26933
Schöppner, Volker, Andrea Wübbeke, B. Geißler, T. Laumer, T. Frick, and M. Schmidt. “Analysis of the Weld Seam Morphology of Polypropylene in Laser Transmission Welding.” Manuf. Sci. Eng, 2018, 140(11).
LibreCat
2018 | Journal Article | LibreCat-ID: 26943
Schöppner, Volker, F. Knoop, M. Köhler, Tobias Lieneke, and Detmar Zimmer. “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen.” Konstruktion 70. Jg. Heft 10 (2018): 83–88.
LibreCat
2018 | Journal Article | LibreCat-ID: 26930
Schöppner, Volker, Detmar Zimmer, Frederick Knoop, and Tobias Lieneke. “Additive Fertigung nach Maß.” Kunststoffe 108. Jg. Heft 6 (2018).
LibreCat
2017 | Journal Article | LibreCat-ID: 27202
Schöppner, Volker, C. Schumacher, and J. Guntermann. “Beurteilung Der Schweißnahtfestigkeiten Verschiedener Kunststoffe Im FDM-Prozess.” Jahresmagazin Kunststofftechnik, 2017, S. 108-114.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27205
Schöppner, Volker, H. Bayazian, F. Reinders, and C. Goebel. “Degradation of Bimodal Distribution Polypropylene and Polyethylene during the Extrusion Process.” In Europe-Africa Conference of the Polymer Processing Society. Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27207
Schöppner, Volker, and K. Westhues. “Differenzierte Betrachtung Der Energieeinträge in Feststoffförder- Und Aufschmelzzonen Gleichläufiger Doppelschneckenextruder.” In 43. Deutsche Compoundiertagung. Nürnberg (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27208
Schöppner, Volker, and J. Walter. “Distinction of Measurement-Related and Material-Related Scattering of the Young’s Modulus in Thermoplastics While Measuring by Quasi-Static Tensile Testing.” In Europe-Africa Conference of the Polymer Processing Society. Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27210
Schöppner, Volker, K. Westhues, R. Weinlein, and A. Knieper. “Energieeintrag in Feststoffförder- Und Aufschmelzzonen Gleichläufiger Doppelschneckenextruder.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27213
Schöppner, Volker, F. Reinders, M. Müller-Roosen, S. Dill, and A. Kaya. “Entwicklung Einer Unweltverträglichen Und Unbedenklichen Flammgeschützten Polyethylen-Blasfolie.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27214
Schöppner, Volker, and J. Trippe. “Feststoff Effizienter Fördern.” Kunststoffe, 2017, 47–52.
LibreCat
2017 | Journal Article | LibreCat-ID: 27216
Schöppner, Volker, and P. Meilwes. “Filterverschmutzung Berechenbar Machen.” Kunststoffe, no. 107. Jg. Heft 8 (2017): 58–61.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27217
Schöppner, Volker, and M. Pohl. “High Speed Extrusion of Modified Polycarbonate.” In 33rd International Conference of the Polymer Processing Society (PPS). Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27221
Schöppner, Volker, and V. Resonnek. “Investigation of the Barrel Temperature Profile on the Process Behavior of Single Screw Extruders and Strategies to Determine the Optimal Temperature Control.” In 33rd International Conference of the Polymer Processing Society (PPS). Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27222
Schöppner, Volker, and K. Westhues. “Investigation of the Temperature Development within the Solid Conveying Zone of Twin-Screw Extruder Based on the Discrete Element Method (DEM).” In Europe-Africa Conference of the Polymer Processing Society. Dresden (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27226
Schöppner, Volker, and P. Lakemeyer. “Laser Transmission Welding of Automotive Head Lamps without Clamping Tool.” Welding in the World, no. Onlineausgabe (2017): 589–602.
LibreCat
2017 | Journal Article | LibreCat-ID: 27227
Schöppner, Volker, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, and D. DuQuesnay. “Matching of Laser Intensity Distribution for Laser Transmission Welding of Thermoplastics.” Welding in the World, no. Onlineausgabe (2017): 1247–52.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27228
Schöppner, Volker, F. Reinders, M. Müller-Roosen, P. Morandini, M. Wolfring, S. Terwolbeck, and S. Dill. “Mehrschichtaufbau Zur Verbesserung Der Mechanischen Eigenschaften von Ökologisch Unbedenklichen Flammschutzfolien.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27231
Schöppner, Volker, and J. Trippe. “Modeling of the Solid Throughput and Pressure Build-Up of Single Screw Smooth Barrel Extruders under Consideration of the Backpressure and High Screw Speeds.” In 33rd International Conference of the Polymer Processing Society (PPS). Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27232
Schöppner, Volker, and F. Reinders. “Modellierung Des Reckprozesses von Mono- Und Biaxial Verstreckten Polypropylenfolien.” In Werkstoffwoche 2017. Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27233
Schöppner, Volker, and P. Meilwes. “Modelling the Contamination Behaviour of Polymer Melt Filters.” In 33rd International Conference of the Polymer Processing Society (PPS). Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27234
Schöppner, Volker, and F. Reinders. “Modelling the Monoaxial Stretching of Polypropylene Films by a Nonlinear Spring Dashpot.” In 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27235
Schöppner, Volker, and F. Reinders. “Modelling the Stretching of Polypropylene Films by a Nonlinear Spring Dashpot Model.” In Europe-Africa Conference of the Polymer Processing Society. Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27236
Schöppner, Volker, I. Fiebig, and P. Lakemeyer. “Opportunities in Welding of Fiber-Reinforced Thermoplastics for Different Weld Positions in Injection-Molded Parts.” In 70th Annual Assembly of the International Institute of Welding (IIW). Shanghai (China), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27237
Schöppner, Volker, and H. Westhues. “Phänomenorientierte Untersuchung Der Feststoffförderzonen Gleichläufiger Doppelschneckenextruder Mithilfe Der DEM-Simulation.” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, no. 13. Jg. Heft 3 (2017): 196–211.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27238
Schöppner, Volker, and I. Fiebig. “Potentiale Zur Erhöhung Der Schweißnahtfestigkeit Faserverstärkter Thermoplaste.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27240
Schöppner, Volker, and K. Westhues. “Simulation von Doppelschneckenextrudern - Einblicke in Das Gemeinschaftsforschungsprojekt SIGMA.” In 12. Würzburger Compoundiertage. Würzburg (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27241
Schöppner, Volker, and P. Lakemeyer. “Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics.” In 70th Annual Assembly of the International Institute of Welding (IIW). Shanghai (China), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27242
Schöppner, Volker, P. Lakemeyer, and F. Reinders. “Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics.” In 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., Tobias Lieneke, and Volker Schöppner. “Reproduzierbarkeit Der Maßhaltigkeit Im Fused Deposition Modeling.” In Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 52–66, 2017. https://doi.org/10.3139/9783446454606.004.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22042
Schumacher, C., Volker Schöppner, and J. Guntermann. “Considering Machine- and Process-Specific Influences to Create Custom-Built Specimens for the Fused Deposition Modeling Process.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:470–84, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22045
Knoop, F., and Volker Schöppner. “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:2757–76, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22049
Schöppner, Volker, C. Schumacher, and J. Guntermann. “Beurteilung Der Schweißnahtfestigkeiten Verschiedener Kunststoffe Im FDM-Prozess.” Jahresmagazin Kunststofftechnik 1, no. 1 (2017): 108–14.
LibreCat
2017 | Journal Article | LibreCat-ID: 22033
Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), 2017, 563–68. https://doi.org/10.1007/s11837-016-2197-2.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22023
Knoop, F., A. Kloke, and Volker Schöppner. “Quality Improvement of FDM Parts by Parameter Optimization .” In 32nd International Conference of the Polymer Processing Society, Vol. 32. American Institute of Physics, 2017. https://doi.org/10.1063/1.5016790.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 27201
Schöppner, Volker, Michael Schadomsky, and J. Walter. “Bestimmung Der Mischgüte Bei Kautschukstiftextrudern Auf Basis Experimenteller Und Simulativer Methoden.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27220
Schöppner, Volker, P. Lakemeyer, Andrea Wübbeke, S. Geißler, and M. Schmidt. “Investigation of Residual Stress in Laser Transmission Welding of Polypropylene.” In 70th Annual Assembly of the International Institute of Welding (IIW). Shanghai (China), 2017.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27245
Schöppner, Volker, K. Westhues, and T Westhues. “A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders.” In 32nd International Conference of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27248
Schöppner, Volker, S. Brockhaus, C. Penner, and J. Möckel. “Auswirkungen von Betriebsparametern in Der Heißluftvulkanisation.” GAK Gummi Fasern Kunststoffe, no. 69. Jg. Heft 7 (2016): 410–13.
LibreCat
2016 | Journal Article | LibreCat-ID: 27249
Schöppner, Volker, S. Littek, Artjom Döring, and Dirk Kuckling. “Berechnung Des Materialabbaus von PP Und PS in Der Plastifiziereinheit Teil 1: Belastung Und Materialmodellierung.” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, 2016, 18.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27258
Schöppner, Volker, and M. Pohl. “First Insight into the High Speed Extrusion of Polycarbonate.” In 32nd International Conference of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27261
Schöppner, Volker, and I. Fiebig. “Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics.” International Journal of Polymer Science, no. Onlineausgabe (2016).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27262
Schöppner, Volker, and I. Fiebig. “Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics.” In 69th Annual Assembly of the International Institute of Welding (IIW). Melbourne (Australien), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27263
Schöppner, Volker, and J. Trippe. “Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method.” In 32nd International Conference of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27265
Schöppner, Volker, K. Westhues, and T. Westhues. “Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders.” In 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27266
Schöppner, Volker, P. Kloke, and K. Westhues. “Modellierung Des Glasfaserlängenabbaus.” In PolyMerTec 2016. Merseburg (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27268
Schöppner, Volker, M. Hüttner, Bernd Henning, and Manuel Webersen. “Non-Destructive Characterization of Hygrothermally Aged Polymers.” In 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Indianapolis (USA), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27270
Schöppner, Volker, T. Herken, F. Sporkmann, and F. Platte. “Partikel Und Schmelze Im Dynamischen Netz.” Kunststoffe, 2016, 70–75.
LibreCat
2016 | Journal Article | LibreCat-ID: 27271
Moritzer, Elmar, Volker Schöppner, P. Lakemeyer, and T. Nordmeyer. “Plasmaunterstütztes Fügen von Kunststoffen.” Joining Plastics, no. 10. Jg. Heft 2 (2016): 100–108.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27272
Schöppner, Volker, A. Bagsik, and F. Knoop. “Quality Improvement of FDM Parts by Parameter Optimization.” In 32nd International Conference of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27273
Schöppner, Volker, and P. Meilwes. “Realitätsnah Und Definiert Verschmutzen.” Kunststoffe, no. 106. Jg. Heft 8 (2016): 80–84.
LibreCat
2016 | Journal Article | LibreCat-ID: 27274
Schöppner, Volker, and I. Fiebig. “Schweißen von Faserverstärkten Kunststoffen: Erhöhung Der Wirksamkeit Der Faserverstärkung in Der Schweißnaht.” Jahresmagazin Kunststofftechnik, 2016, 120–26.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27275
Schöppner, Volker, I. Fiebig, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, and D. DuQuesnay. “Several Influences during Examinations of Laser Transmission Welding - Current Status.” In 69th Annual Assembly of the International Institute of Welding (IIW). Melbourne (Australien), 2016.
LibreCat
Search
Filter Publications
Display / Sort
Export / Embed
252 Publications
2023 | Conference Paper | LibreCat-ID: 48672
Schöppner, Volker, Karina Gevers, L. Schraa, P. Töws, K. Uhlig, M. Stommel, and J. Decker. “Evaluation of the Effects of Different Heating Strategies on the Joining Partners during Infrared Welding of Black Polyamides.” Singapur (Singapur), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48671
Schöppner, Volker, Karina Gevers, L. Schraa, K. Uhlig, P. Töws, J. Decker, and M. Stommel. “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation.” Proceedings of the 2023 International Conference on Composite Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48665
Schöppner, Volker, and Theresa Arndt. “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten.” Joining Plastics, no. 17 (2023): 20–27.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48662
Schöppner, Volker, and J. Petzke. “Dielectric Heating in the Vulcanization Process of Rubber Extrudates.” Denver, CO (USA), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48751
Schöppner, Volker, Karina Gevers, N. Hoenen, K. Uhlig, P. Töws, J. Decker, and M. Stommel. “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts Based on Mori-Tanaka Homogenization Method.” Advanced Structured Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48754
Schöppner, Volker, Laura Austermeier, and Dorte Trienens. “Verbesserung der Betriebspunktauslegung durch Schneckensimulation.” Wissenschaftlicher Arbeitskreis Kunststofftechnik, 2023, 62–66.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48748
Köllermeier, Jonas, and Volker Schöppner. “Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data.” Ilmenau (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48749
Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.” Joining Plastics, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48753
Schöppner, Volker, Maximilian Frank, and Christoph Wilhelm Theodor Schall. “The Wave Must Be Right.” Plastic Insights, no. 7/2023 (2023): 52–54.
LibreCat
2023 | Book Chapter | LibreCat-ID: 48649
Gevers, Karina, P. Töws, L. Schraa, J. Decker, Volker Schöppner, K. Uhlig, and M. Stommel. “Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten.” In 11. Landshuter Leichtbau-Colloquium, 1st ed., 8–17. Landshut: LC-Verlag, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48651
Schöppner, Volker, Laura Austermeier, and A. Nordieker. “A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION.” Denver, CO (USA), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48660
Schöppner, Volker, Laura Austermeier, and A. Alsoud. “Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder.” St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48652
Schöppner, Volker, Karina Gevers, L. Schraa, P. Töws, K. Uhlig, M. Stommel, and J. Decker. “Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide.” Joining Plastics, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48661
Schöppner, Volker, and J. Petzke. “Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren.” Gummersbach (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48738
Schöppner, Volker, and Dorte Trienens. “Investigation of the Influence of Screw Geometry on the Resulting Melt Quality for Cast Film Extrusion.” St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48735
Schöppner, Volker, Maximilian Frank, and Christoph Wilhelm Theodor Schall. “Hauptsache, die Wellenlänge stimmt.” Kunststoffe, no. 9/2023 (2023): 76–78.
LibreCat
2023 | Journal Article | LibreCat-ID: 48746
Schöppner, Volker, Dennis Kleinschmidt, C. Hopmann, C. Wiesel, U. Nillius, M. Schön, and A. Limper. “Optimisation of the Simulation of Rubber Extrusion Dies by Means of the Integration of Empirically Determined Characteristic Maps.” KGK Kautschuk Gummi Kunststoffe, 2023, 47–52.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48745
Schöppner, Volker, Karina Gevers, M. Albrecht, and A. Seefried. “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen.” Chemnitz (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48744
Petzke, J., Dennis Kleinschmidt, and Volker Schöppner. “Microwave Heating of Rubber Extrudates.” St. Gallen (Schweiz), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48740
Schöppner, Volker, and Dorte Trienens. “Investigation Regarding the Correlation of the Relative Influences during the Extrusion Process of Cast Films on the Residual Melt Quality.” Ilmenau, 2023. https://doi.org/10.22032/dbt.58867.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48743
Schöppner, Volker, Matthias Altepeter, Christoph Wilhelm Theodor Schall, Sven Wanke, and Marina Kley. “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder.” Polymers, 2023, 10.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49740
Stüker, Daniel, and Volker Schöppner. “An Approach for the Numerical Calculation of the Non-Isothermal Pressure-Throughput-Characteristics of Single Screw Melt-Extruder.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0138944.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49737
Malatyali, Hatice, Volker Schöppner, and Theresa Hoemann. “Investigation of the Influence of Process and Screw Configurations on Fiber Length for Recycled Carbon Fiber.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0139631.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49734
Malatyali, Hatice, and Volker Schöppner. “Investigation of Shear Rates in Twin-Screw Extruder Using CFD-Simulation.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0139630.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52800
Stüker, Daniel, and Volker Schöppner. “Simplified Numerical Calculation of the Isothermal, Three-Dimensional, Non-Newtonian Flow Characteristics of Single-Screw Melt-Extruder.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0138943.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 31733
Schöppner, Volker, and Florian Brüning. “Calibration of a Contact Model for DEM Simulations of Grooved Feed Sections of Single Screw Extruders.” In 36th International Conference of the Polymer Processing Society (PPS-36). Montreal (Kanada), 2023. https://doi.org/10.1063/5.0135858.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34748
Vogtschmidt, Sascha, and Volker Schöppner. “The Short-and Long-Term Properties of Welded High-Temperature-Resistant Thermoplastics,” 2023. https://doi.org/10.1007/s40194-023-01595-3.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52801
Altepeter, Matthias, Sven Wanke, and Volker Schöppner. “Analysis and Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder.” In INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022. AIP Publishing, 2023. https://doi.org/10.1063/5.0135824.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48750
Schöppner, Volker, Matthias Altepeter, Laura Austermeier, Sven Wanke, and Philipp Meinheit. “Polypropylene Degradation on Co-Rotating Twin-Screw Extruders.” Polymers 2023, no. 15(9) (2023): 2181. https://doi.org/10.3390/polym15092181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34736
Schöppner, Volker, and Maximilian Frank. “Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as Well as Pressure Throughput Behavior,” 2023. https://doi.org/10.1063/5.0135825.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 29946
Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Design of a Test Bench for Measuring the Degradation Behavior of Plastics during Processing.” In PPS36, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48742
Schöppner, Volker, and Christoph Wilhelm Theodor Schall. “Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior.” Materials, no. 16(17) (2023): 5891. https://doi.org/10.3390/ma16175891.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48659
Trienens, Dorte, Volker Schöppner, and Robin Bunse. “Determination of Correlations between Melt Quality and the Screw Performance Index in the Extrusion Process.” Polymers 2023, 2023. https://doi.org/10.3390/polym15163427.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48737
Schöppner, Volker, and Dennis Kleinschmidt. “Improvement of a Method for the Correction of Wall Slip Effects within the Rheological Measurements of Filled Rubber Compounds.” SPE Polymers, 2023, 1–17.
LibreCat
2023 | Journal Article | LibreCat-ID: 52833
Schöppner, Volker, Laura Austermeier, Florian Brüning, Jan Philipp Oldemeier, and O. Brandt. “Recycling-Ansatz für mehrkomponentige Kunststoffprodukte durch thermische Verbundtrennung.” EXTRUSION, no. 8/2023 (2023): 56–59.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52840
Schöppner, Volker, and Theresa Arndt. “Anvil-Free Ultrasonic Welding for Welding Situations with One Sided Access.” In 76th Annual Assembly of the International Institute of Welding (IIW). Singapur , 2023.
LibreCat
2022 | Journal Article | LibreCat-ID: 29947
Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Measurement of Material Degradation in Dependence of Shear Rate, Temperature, and Residence Time.” Polymer Engineering and Science 62, no. 3 (2022): 815–23. https://doi.org/10.1002/pen.25887.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 34723
Schöppner, Volker, Karina Gevers, L. Schraa, and P. Töws. “Auswirkungen Unterschiedlicher Erwärmstrategien Auf Die Quasistatische Und Zyklische Belastbarkeit von Infrarotgeschweißten, Glasfaserverstärkten Thermoplastbauteilen.” Joining Plastics, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34717
Schöppner, Volker, Florian Brüning, and L. Sommer. “A Reverse Engineering Approach for Calibrating Frictional Behavior of Contact Models for Numerical Simulation of Solids Conveying in Extruders,” 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34722
Schöppner, Volker, Dennis Kleinschmidt, U. Nillius, and C. Hopmann. “Auswirkungen Des Vorscherungseinflusses Im Extrusionsprozess Auf Die Rheologischen Kennwerte Gefüllter Kautschukmischungen.” GAK, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34721
Schöppner, Volker, Marius Dörner, Maximilian Frank, and Christoph Wilhelm Theodor Schall. “Auf Der Welle Zum Mischerfolg.” Kunststoffe, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34730
Schöppner, Volker, and Dennis Kleinschmidt. “Estimation and Correction of Non-Isothermal Effects of Carbon Black-Filled Rubber Compounds in Viscosity Measurements,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34738
Schöppner, Volker, Dennis Kleinschmidt, C. Hopmann, A. Limper, F. Fey, M. Facklam, and M. Schön. “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34735
Schöppner, Volker, and Florian Brüning. “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34734
Schöppner, Volker, and Jonas Köllermeier. “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34737
Schöppner, Volker, and Maximilian Frank. “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34740
Schöppner, Volker, Matthias Altepeter, and S. Wanke. “Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder,” 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34752
Schöppner, Volker, Dennis Kleinschmidt, U. Nillius, and C. Hopmann. “Weiterentwicklung Eines Verfahrens Zur Korrektur von Wandgleiteffekten Im Rahmen Rheologischer Messungen an Gefüllten Kautschukmischungen.” GAK, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33090
Gevers, Karina, Alexander Tornede, Marcel Dominik Wever, Volker Schöppner, and Eyke Hüllermeier. “A Comparison of Heuristic, Statistical, and Machine Learning Methods for Heated Tool Butt Welding of Two Different Materials.” Welding in the World, 2022. https://doi.org/10.1007/s40194-022-01339-9.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34727
Schöppner, Volker, Jonas Köllermeier, G. Hiesgen, and J. Trippe. “Development of Simulation Based Assistant Systems for Automatic Process Monitoring and Derivation of Recommendations to Optimize a Profile Extrusion Line,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34720
Schöppner, Volker, and Jonas Köllermeier. “Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders,” 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34726
Schöppner, Volker, and Jonas Köllermeier. “Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles,” 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 29948
Brüning, Florian, and Volker Schöppner. “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders.” Polymers 14, 2022. https://doi.org/10.3390/polym14020256.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34708
Schöppner, Volker, Karina Gevers, A. Tornede, M. Wever, and E. Hüllermeier. “A Comparison of Heuristic, Statistical, and Machine Learning Methods for Heated Tool Butt Welding of Two Different Materials.” Welding in the World, 2022, 14.
LibreCat
2022 | Book | LibreCat-ID: 48356
Schöppner, Volker, and Sascha Vogtschmidt. Schweißnahtkennwerte Für Die Lebensdaueroptimierte Bauteilauslegung von Hochtemperaturbeständigen Thermoplasten. Koblenz, 2022.
LibreCat
2022 | Book | LibreCat-ID: 48358
Schöppner, Volker, M. Dörner, Maximilian Frank, and Christoph Schall. On the Wave to Successful Mixing, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
Rüppel, Annette, Susanne Wolff, Jan Philipp Oldemeier, Volker Schöppner, and Hans-Peter Heim. “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution.” Polymers 14, no. 15 (2022). https://doi.org/10.3390/polym14153113.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 24372
Gevers, Karina, and Volker Schöppner. “Lebensdauer vorhersagen?” K-Zeitung, n.d.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
Gevers, Karina, Volker Schöppner, and Eyke Hüllermeier. “Heated Tool Butt Welding of Two Different Materials – Established Methods versus Artificial Intelligence,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
Arndt, Theresa, and Volker Schöppner. “Development of Scale up Rules for Quasi-Simultaneous Laser Transmission Welding of Thermoplastics,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24441
Frank, Maximilian, and Volker Schöppner. “DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION.” In ANTEC® 2021, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26630
Altepeter, Matthias, Volker Schöppner, and Sven Wanke. “Analysis and Modelling of the Material Degradation of Polypropylene on the Co-Rotating Twin-Screw Extruder,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23839
Marschik, Christian, Wolfgang Roland, Marius Döner, Georg Steinbichler, and Volker Schöppner. “A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion.” Polymers, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23867
Bialaschik, Max, Volker Schöppner, Mirko Albrecht, and Michael Gehde. “Influence of Material Degradation on Weld Seam Quality in Hot Gas Butt Welding of Polyamides.” Welding in the World, 2021, 1161–69. https://doi.org/10.1007/s40194-021-01108-0.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 31758
Schöppner, Volker, and Jan Hendrik Martens. “Eine Runde Sache.” Kunststoffe, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31776
Schöppner, Volker, and Karina Gevers. “ Lebensdauer Vorhersagen?” K-Zeitung, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31777
Schöppner, Volker, Matthias Altepeter, and Sven Wanke. “Material Degradation of Polypropylene on the Co-Rotating Twin Screw Extruder.” In 36th International Conference of the Polymer Processing Society (PPS). Melbourne (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31782
Schöppner, Volker, and Dennis Kleinschmidt. “Viskoelastische Materialmodellierung in Strömungssimulationen.” In 27. Techomer - Fachtagung Über Verarbeitung Und Anwendung von Polymeren. Chemnitz (Online) , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31785
Schöppner, Volker, M. Albrecht, M. Gehde, and Max Oliver Bialaschik. “Warmgasstumpfschweißen - Einfluss Des Werkzeugdesigns Und Des Verwendeten Prozessgases Auf Das Erwärm- Und Schweißverhalten.” In Technomer. Chemnitz (Deutschland), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31784
Schöppner, Volker, M. Dörner, and Christoph Wilhelm Theodor Schall. “Vorteilhaftes Prozessverhalten von Wave-Schnecken in Der Einschneckenextrusion.” In Technomer 2021. Chemnitz, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31786
Schöppner, Volker, Max Oliver Bialaschik, M. Albrecht, and M. Gehde. “Warmgasstumpfschweißen von Kunststoffen.” Joining Plastics, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31719
Schöppner, Volker, and Sascha Vogtschmidt. “ Analyse Des Erwärm- Und Umstellverhaltens Beim Schweißen von Hochtemperaturbeständigen Kunststoffen.” In DVS CONGRESS. Deutschland (digital), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31730
Schöppner, Volker, and Sascha Vogtschmidt. “ Anwendungsorientiertes Schweißen von Hochtemperaturbeständigen Kunststoffen.” In Technomer. Deutschland (digital), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31750
Köllermeier, Jonas, and Volker Schöppner. “Development of a Dynamic Strategy to Determine the Optimal Barrel Temperature of Single Screw Extruders.” In 36th International Conference of the Polymer Processing Society (PPS). Montreal (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23835
Dörner, Marius, and Volker Schöppner. “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts.” In ANTEC 21, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24383
Wübbeke, Andrea, Volker Schöppner, Theresa Arndt, Jan-Ole Maras, Marcus Fitze, Christian Moltzahn, Tao Wu, and Thomas Niendorf. “Effect of Nucleating Additives on Short- and Long-Term Tensile Strength and Residual Stresses of Welded Polypropylene Samples .” Polymers, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24442
Frank, Maximilian, Viola Hollenhorst, and Volker Schöppner. “Investigation of the Pressure-Throughput Behavior of Different Faceted Mixer Geometries on an Analytical and Simulative Basis .” In 36th International Conference of the Polymer Processing - PPS 2021, 2021.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24133
Schöppner, Volker, Laura Austermeier, and Kilian Dietl. “Der richtige Dreh für Simulationen.” Blasformen & Extrusionswerkzeuge, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24134
Schöppner, Volker, Laura Austermeier, and Kilian Dietl. “SKZ simuliert Doppelschnecke.” K Zeitung, 2020.
LibreCat
2020 | Misc | LibreCat-ID: 24204
Schöppner, Volker, M. Dörner, and C. Marschik. ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24207
Schöppner, Volker, M. Dörner, C. Marschik, W. Roland, S. Schaufler, and G. Steinbichler. “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion).” Polymers, no. 12(9) (2020): 1900.
LibreCat
2020 | Journal Article | LibreCat-ID: 24231
Schöppner, Volker, M. Dörner, C. Marschik, and G. Steinbichler. “Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws.” Polymers, 2020, 946.
LibreCat
2020 | Journal Article | LibreCat-ID: 24312
Vogtschmidt, Sascha, Isabel Fiebig, and Volker Schöppner. “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien.” Joining Plastics, no. 3–4 (2020).
LibreCat
2020 | Conference Paper | LibreCat-ID: 24318
Vogtschmidt, Sascha, and Volker Schöppner. “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien.” In DVS CONGRESS 2020 - Große Schweißtechnische Tagung, Vol. 365, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24321
Vogtschmidt, Sascha, and Volker Schöppner. “Vibration Welding of Components with Angled Areas in the Direction of Vibration.” Welding in the World 64 (2020): 1843–53.
LibreCat
2020 | Journal Article | LibreCat-ID: 24324
Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.” Joining Plastics, no. 3–4 (2020).
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24385
Arndt, Theresa, and Volker Schöppner. “Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln Für Das Quasisimultane Laserdurchstrahlschweißen von Thermoplasten.” Joining Plastics, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24386
Arndt, Theresa, and Volker Schöppner. “Wenn Regeln Potenziale Freisetzen.” K-Zeitung, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24387
Arndt, Theresa, and Volker Schöppner. “Quasi-Simultaneous Laser Transmission Welding.” PhotonicsViews, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24471
Schöppner, Volker, and Max Bialaschik. “Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides.” In 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23861
Altepeter, Matthias, and Volker Schöppner. “Materialabbau Im Doppelschneckenextruder.” Kunststoffe, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23865
Schöppner, Volker, and Florian Brüning. “Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders Based on Discrete Element Simulations.” In Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, edited by Christian Hopmann and Rainer Dahlmann. Springer, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23868
Albrecht, Mirko, Max Bialaschik, Michael Gehde, and Volker Schöppner. “Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden.” DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365 (2020).
LibreCat
2020 | Conference Paper | LibreCat-ID: 23873
Albrecht, Mirko, Max Bialaschik, Michael Gehde, and Volker Schöppner. “Hot Gas Welding – Influences of the Tool Design,” 2020. https://doi.org/10.1063/5.0029478.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 24245
Schöppner, Volker, Andrea Wübbeke, B. Geißler, M. Schmidt, A. Maginer, T. Wu, T. Niendorf, F. Jakob, and H. Heim. “Investigation of Residual Stresses of Hot Plate Welding.” In 73rd Annual Assembly of the International Institute of Welding (IIW). Marina Bay (Singapore): Springer-Verlag, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24236
Schöppner, Volker, Andrea Wübbeke, Fabian Schriegel, Andrej Paul, Michael Tiemann, Bastian Geißler, Michael Schmidt, Arnaud Magnier, and Thomas Niendorf. “Selected Aspects for the Assessment of Laser Transmission Welding.” Joining Plastics, 2020, 30–35.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24472
Schöppner, Volker, Andrea Wübbeke, A. Paul, M. Tiemann, Laura Austermeier, M. Fitze, M. Chen, et al. “LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS.” In ANTEC20, 2020.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25617
Schöppner, Volker, and F. Sporkmann. “Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation.” In 35th International Conference of the Polymer Processing Society (PPS). Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25622
Schöppner, Volker, and M. Dörner. “COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS.” In 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25623
Schöppner, Volker, and V. Resonnek. “DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC.” In 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Detroit (USA), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25627
Schöppner, Volker, and K. Westhues. Entwicklung Eines Modells Zur Berechnung Der Initialen Aufschmelzvorgänge in Gleichläufigen Doppelschneckenextrudern. Technomer . Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25628
Schöppner, Volker, and J. Walter. “Entwicklung von Scale-Up Regeln Für Kaltgefütterte Kautschukstiftextruder Teil 1.” GAK-Gummi Fasern Kunststoffe, 2019, S. 152-159.
LibreCat
2019 | Journal Article | LibreCat-ID: 25629
Schöppner, Volker, and J. Walter. “Entwicklung von Scale-Up Regeln Für Kaltgefütterte Kautschukstiftextruder Teil 2.” GAK Gummi Faser Kunststoffe, 2019, 206–13.
LibreCat
2019 | Journal Article | LibreCat-ID: 25633
Schöppner, Volker, and V. Resonnek. “Extruder Optimier Dich!” Kunstsstoffe, 2019, 56–61.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25634
Schöppner, Volker. “Grundlagen Der Haftung in Der Grenzfläche Beim Kunststoffschweißprozess.” In VDI Wissensforum - Schweißen von Kunststoffen. Paderborn (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 24326
Vogtschmidt, Sascha, and Volker Schöppner. “Vibration Welding of Components with Angled Areas in the Direction of Vibration.” Bratislava, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25736
Schöppner, Volker, H. Bayazian, and Ali Yadegari. “Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters.” In 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25737
Schöppner, Volker, F. Sporkmann, and Alexander Heide. “New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method.” In 35th International Conference of the Polymer Processing Society (PPS). Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25746
Schöppner, Volker, H. Bayazian, Ali Yadegari, and Hoda Haddad. “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters.” In 35th PPS. Cesme-Izmir (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25750
Schöppner, Volker, and F. Sporkmann. “Scale up von Doppelschneckenmaschinen.” In VDI Wissensforum. Stuttgart (Deutschland), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25751
Schöppner, Volker, P. Meilwes, and K. Westhues. Schmelzefilter. Technomer . Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25753
Schöppner, Volker, and F. Sporkmann. “Simulation Aids Compounding Success.” Compounding World, 2019, 47–56.
LibreCat
2019 | Journal Article | LibreCat-ID: 25754
Schöppner, Volker, and Florian Brüning. “Simulation Der Feststoffförderung Im Einschneckenextruder.” WAK Jahresmagazin, 2019, 64–67.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25759
Schöppner, Volker, and K. Westhues. “Vortrag „Aufschmelzen“ Optimierter Betrieb Und Scale-up von Doppelschnecken-Extrudern.” In VDI Wissensforum. Stuttgart (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 23866
Schöppner, Volker, and Florian Brüning. “Simulation Der Feststoffförderung Im Einzug von Einschneckenextrudern.” WAK Jahresmagazin, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 23879
Albrecht, Mirko, Michael Gehde, Max Bialaschik, and Volker Schöppner. “Einfluss Des Werkzeugdesignes Auf Das Erwärmverhalten Beim Warmgasschweißen,” 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22027
Schöppner, Volker, C. Schumacher, and C. Fels. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.” In AIP Conference Proceedings. AIP Publishing, 2019. https://doi.org/10.1063/1.5088315.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 25619
Schöppner, Volker, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, and G. Steinbichler. “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).” Polymers, 2019, 1488–1515.
LibreCat
2019 | Conference Paper | LibreCat-ID: 44308
Bayazian, Hoda, Volker Schöppner, Ali Yadegari , and Hoda Haddad . “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25641
Schöppner, Volker, Andrea Wübbeke, Andre Paul, Michael Tiemann, F. Fitze, Laura Austermeier, M. Chen, et al. “Langzeitfestigkeit von Schweißungen Aus PP Unter Berücksichtigung Der Morphologie.” In Werkstoffwoche (2019). Dresden (Deutschland), 2019.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26929
Schöppner, Volker, Christian Schumacher, and Camilla Fels. “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process.” In 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26934
Schöppner, Volker, F. Sporkmann, and J. Markarian. “Building the Perfect Model.” Compounding World, no. Onlineausgabe März (2018): 31–40.
LibreCat
2018 | Journal Article | LibreCat-ID: 26935
Schöppner, Volker, and P. Meilwes. “CAD-Datenerzeugung Zur Druckverlustsimulation von Filtermedien.” Konstruktion 70. Jg. Heft 11 (2018).
LibreCat
2018 | Conference Paper | LibreCat-ID: 26940
Schöppner, Volker, and K. Westhues. “Differenzierte Betrachtung Der Energieeinträge in Feststoffförder- Und Aufschmelzzone Gleichläufiger Doppelschneckenextruder,” 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26944
Schöppner, Volker, H. Bayazian, A. Yadgari, J. Morshedian, A. Jamshidi, and M. Razavi-Nouri. “Evaluation of Morphology and Crystallinity of Biaxially Oriented PP Films.” In 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26945
Schöppner, Volker, and I. Fiebig. “Evaluation of the Elongation Ability of Polymer Melts for the Extension of the Design Freedom in Vibration Welding.” In 71st Annual Assembly of the International Institute of Welding (IIW), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26947
Schöppner, Volker, and J. Fiebig. “Factors Influencing the Fiber Orientation in Welding of Fiber-Reinforced Thermoplastics.” Welding in the World 62. Jg., no. Heft 5 (2018): 997–1012.
LibreCat
2018 | Journal Article | LibreCat-ID: 26950
Schöppner, Volker, and I. Fiebig. “Influence of Fiber Orientation and Weld Position in Welding Injection-Molded Fiber-Reinforced Thermoplastics.” Welding in the World 62, no. 6 (2018): 1301–9.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26952
Schöppner, Volker, and H. Bayazian. “Investigation of Molecular Weight Distributions during Extrusion Process of Polypropylene by Rheometry Experiment.” In 34th International Conference of the Polymer Processing Societey (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26955
Schöppner, Volker, C. Schumacher, and C. Fels. “Materialentwicklung für FLM.” In WAK-Symposium, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26956
Schöppner, Volker, C. Schumacher, and C. Fels. “Materialschwindung und Verzug im FDM-Prozess.” In DVM Tagung - Additiv gefertigte Bauteile und Strukturen, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26957
Schöppner, Volker, and J. Trippe. “Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds.” International Polymer Processing 33, no. 4 (2018).
LibreCat
2018 | Conference Paper | LibreCat-ID: 26958
Schöppner, Volker, and J. Trippe. “Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders.” In 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26959
Schöppner, Volker, and P. Meilwes. “Modelling the Contamination Behavior of Polymer Melt Filters and Pressure Loss Simulations of Filtration Media.” In 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26960
Schöppner, Volker, H. Bayazian, Matthias Hopp, and A. Yadegari. “Molecular Weight Distribution Prediction of Rheology against Gel Permeation Chromatography for Film Grade Polypropylene.” In 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26962
Schöppner, Volker, and F. Sporkmann. “New Method to Analyze the Throughput-Pressure Behavior with the Corrected Twin Screw Channel Geometry and the Induced Drag Flow of Screw Elements by Using 3D FEM Simulation.” In 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26964
Schöppner, Volker, C. Schumacher, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” In 29th Annual International Solid Freeform Fabrication Symposium (SFF) - An Additive Manufacturing Conference, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26965
Schöppner, Volker, and J. Walter. “Scale-Up of Garvey-Die Test Setup.” In 13. Kautschuk-Herbst-Kolloquium (KHK), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26966
Schöppner, Volker, and J. Walter. “Scale-Up Regeln für Kautschukstiftextruder, Ansätze auf Basis einer konstanten Mischgüte.” In Deutsche Kautschuk-Tagung (DKT 2018), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26967
Schöppner, Volker, and I. Fiebig. “Schweißnahtfestigkeit von Sandwichbauteilen mit einer glasfaserverstärkten Kernkomponente.” Joining Plastics 12, no. 2 (2018): 87–93.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26968
Schöppner, Volker, and V. Resonnek. “Self-Optimizing Barrel Temperature Setting Control of Single Screw Extruders for Improving the Melt Quality.” In 34th International Conference of the Polymer Processing Society (PPS), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22020
Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
Knoop, F., M. Köhler, Tobias Lieneke, Detmar Zimmer, and Volker Schöppner. “Erarbeitung von Konstruktionsregeln Für Hybridbauteile: Integration von Metallischen Einlegern in FDM-Strukturen.” Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe 10 (2018): 83–88.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
Knoop, F., Tobias Lieneke, Volker Schöppner, and Detmar Zimmer. “Additive Fertigung Nach Maß.” Kunststoffe 6 (2018): 70–73. https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
Schumacher, C., Volker Schöppner, and S. Gnaase. “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process.” In 29th Annual International Solid Freeform Fabrication Symposium, 29:1112–20, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22046
Knoop, F., and Volker Schöppner. “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process.” In SPE ANTEC 2018, Vol. 1. Society of Plastics Engineers , 2018. https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 26954
Schöppner, Volker, Michael Schadomsky, and Daniel Stüker. “Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity.” In Deutsche Kautschuk-Tagung (DKT 2018), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26932
Schöppner, Volker, Patrick Lakemeyer, Bastian Geißler, Tobias Laumer, Andrea Wübbeke, and Thomas Frick. “Analysis of the Interaction between the Temperature Field and the Weld Seam Morphology in Laser Transmission Welding by Using Two Different Discrete Laser Wavelengths.” Journal of Laser Applications 30. Jg. (2018).
LibreCat
2018 | Journal Article | LibreCat-ID: 26933
Schöppner, Volker, Andrea Wübbeke, B. Geißler, T. Laumer, T. Frick, and M. Schmidt. “Analysis of the Weld Seam Morphology of Polypropylene in Laser Transmission Welding.” Manuf. Sci. Eng, 2018, 140(11).
LibreCat
2018 | Journal Article | LibreCat-ID: 26943
Schöppner, Volker, F. Knoop, M. Köhler, Tobias Lieneke, and Detmar Zimmer. “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen.” Konstruktion 70. Jg. Heft 10 (2018): 83–88.
LibreCat
2018 | Journal Article | LibreCat-ID: 26930
Schöppner, Volker, Detmar Zimmer, Frederick Knoop, and Tobias Lieneke. “Additive Fertigung nach Maß.” Kunststoffe 108. Jg. Heft 6 (2018).
LibreCat
2017 | Journal Article | LibreCat-ID: 27202
Schöppner, Volker, C. Schumacher, and J. Guntermann. “Beurteilung Der Schweißnahtfestigkeiten Verschiedener Kunststoffe Im FDM-Prozess.” Jahresmagazin Kunststofftechnik, 2017, S. 108-114.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27205
Schöppner, Volker, H. Bayazian, F. Reinders, and C. Goebel. “Degradation of Bimodal Distribution Polypropylene and Polyethylene during the Extrusion Process.” In Europe-Africa Conference of the Polymer Processing Society. Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27207
Schöppner, Volker, and K. Westhues. “Differenzierte Betrachtung Der Energieeinträge in Feststoffförder- Und Aufschmelzzonen Gleichläufiger Doppelschneckenextruder.” In 43. Deutsche Compoundiertagung. Nürnberg (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27208
Schöppner, Volker, and J. Walter. “Distinction of Measurement-Related and Material-Related Scattering of the Young’s Modulus in Thermoplastics While Measuring by Quasi-Static Tensile Testing.” In Europe-Africa Conference of the Polymer Processing Society. Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27210
Schöppner, Volker, K. Westhues, R. Weinlein, and A. Knieper. “Energieeintrag in Feststoffförder- Und Aufschmelzzonen Gleichläufiger Doppelschneckenextruder.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27213
Schöppner, Volker, F. Reinders, M. Müller-Roosen, S. Dill, and A. Kaya. “Entwicklung Einer Unweltverträglichen Und Unbedenklichen Flammgeschützten Polyethylen-Blasfolie.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27214
Schöppner, Volker, and J. Trippe. “Feststoff Effizienter Fördern.” Kunststoffe, 2017, 47–52.
LibreCat
2017 | Journal Article | LibreCat-ID: 27216
Schöppner, Volker, and P. Meilwes. “Filterverschmutzung Berechenbar Machen.” Kunststoffe, no. 107. Jg. Heft 8 (2017): 58–61.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27217
Schöppner, Volker, and M. Pohl. “High Speed Extrusion of Modified Polycarbonate.” In 33rd International Conference of the Polymer Processing Society (PPS). Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27221
Schöppner, Volker, and V. Resonnek. “Investigation of the Barrel Temperature Profile on the Process Behavior of Single Screw Extruders and Strategies to Determine the Optimal Temperature Control.” In 33rd International Conference of the Polymer Processing Society (PPS). Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27222
Schöppner, Volker, and K. Westhues. “Investigation of the Temperature Development within the Solid Conveying Zone of Twin-Screw Extruder Based on the Discrete Element Method (DEM).” In Europe-Africa Conference of the Polymer Processing Society. Dresden (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27226
Schöppner, Volker, and P. Lakemeyer. “Laser Transmission Welding of Automotive Head Lamps without Clamping Tool.” Welding in the World, no. Onlineausgabe (2017): 589–602.
LibreCat
2017 | Journal Article | LibreCat-ID: 27227
Schöppner, Volker, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, and D. DuQuesnay. “Matching of Laser Intensity Distribution for Laser Transmission Welding of Thermoplastics.” Welding in the World, no. Onlineausgabe (2017): 1247–52.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27228
Schöppner, Volker, F. Reinders, M. Müller-Roosen, P. Morandini, M. Wolfring, S. Terwolbeck, and S. Dill. “Mehrschichtaufbau Zur Verbesserung Der Mechanischen Eigenschaften von Ökologisch Unbedenklichen Flammschutzfolien.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27231
Schöppner, Volker, and J. Trippe. “Modeling of the Solid Throughput and Pressure Build-Up of Single Screw Smooth Barrel Extruders under Consideration of the Backpressure and High Screw Speeds.” In 33rd International Conference of the Polymer Processing Society (PPS). Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27232
Schöppner, Volker, and F. Reinders. “Modellierung Des Reckprozesses von Mono- Und Biaxial Verstreckten Polypropylenfolien.” In Werkstoffwoche 2017. Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27233
Schöppner, Volker, and P. Meilwes. “Modelling the Contamination Behaviour of Polymer Melt Filters.” In 33rd International Conference of the Polymer Processing Society (PPS). Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27234
Schöppner, Volker, and F. Reinders. “Modelling the Monoaxial Stretching of Polypropylene Films by a Nonlinear Spring Dashpot.” In 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27235
Schöppner, Volker, and F. Reinders. “Modelling the Stretching of Polypropylene Films by a Nonlinear Spring Dashpot Model.” In Europe-Africa Conference of the Polymer Processing Society. Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27236
Schöppner, Volker, I. Fiebig, and P. Lakemeyer. “Opportunities in Welding of Fiber-Reinforced Thermoplastics for Different Weld Positions in Injection-Molded Parts.” In 70th Annual Assembly of the International Institute of Welding (IIW). Shanghai (China), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27237
Schöppner, Volker, and H. Westhues. “Phänomenorientierte Untersuchung Der Feststoffförderzonen Gleichläufiger Doppelschneckenextruder Mithilfe Der DEM-Simulation.” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, no. 13. Jg. Heft 3 (2017): 196–211.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27238
Schöppner, Volker, and I. Fiebig. “Potentiale Zur Erhöhung Der Schweißnahtfestigkeit Faserverstärkter Thermoplaste.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27240
Schöppner, Volker, and K. Westhues. “Simulation von Doppelschneckenextrudern - Einblicke in Das Gemeinschaftsforschungsprojekt SIGMA.” In 12. Würzburger Compoundiertage. Würzburg (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27241
Schöppner, Volker, and P. Lakemeyer. “Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics.” In 70th Annual Assembly of the International Institute of Welding (IIW). Shanghai (China), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27242
Schöppner, Volker, P. Lakemeyer, and F. Reinders. “Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics.” In 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22040
Knoop, F., Tobias Lieneke, and Volker Schöppner. “Reproduzierbarkeit Der Maßhaltigkeit Im Fused Deposition Modeling.” In Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 52–66, 2017. https://doi.org/10.3139/9783446454606.004.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22042
Schumacher, C., Volker Schöppner, and J. Guntermann. “Considering Machine- and Process-Specific Influences to Create Custom-Built Specimens for the Fused Deposition Modeling Process.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:470–84, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22045
Knoop, F., and Volker Schöppner. “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling.” In 28th Annual International Solid Freeform Fabrication Symposium, 28:2757–76, 2017. http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22049
Schöppner, Volker, C. Schumacher, and J. Guntermann. “Beurteilung Der Schweißnahtfestigkeiten Verschiedener Kunststoffe Im FDM-Prozess.” Jahresmagazin Kunststofftechnik 1, no. 1 (2017): 108–14.
LibreCat
2017 | Journal Article | LibreCat-ID: 22033
Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085.” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), 2017, 563–68. https://doi.org/10.1007/s11837-016-2197-2.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22023
Knoop, F., A. Kloke, and Volker Schöppner. “Quality Improvement of FDM Parts by Parameter Optimization .” In 32nd International Conference of the Polymer Processing Society, Vol. 32. American Institute of Physics, 2017. https://doi.org/10.1063/1.5016790.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 27201
Schöppner, Volker, Michael Schadomsky, and J. Walter. “Bestimmung Der Mischgüte Bei Kautschukstiftextrudern Auf Basis Experimenteller Und Simulativer Methoden.” In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27220
Schöppner, Volker, P. Lakemeyer, Andrea Wübbeke, S. Geißler, and M. Schmidt. “Investigation of Residual Stress in Laser Transmission Welding of Polypropylene.” In 70th Annual Assembly of the International Institute of Welding (IIW). Shanghai (China), 2017.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27245
Schöppner, Volker, K. Westhues, and T Westhues. “A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders.” In 32nd International Conference of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27248
Schöppner, Volker, S. Brockhaus, C. Penner, and J. Möckel. “Auswirkungen von Betriebsparametern in Der Heißluftvulkanisation.” GAK Gummi Fasern Kunststoffe, no. 69. Jg. Heft 7 (2016): 410–13.
LibreCat
2016 | Journal Article | LibreCat-ID: 27249
Schöppner, Volker, S. Littek, Artjom Döring, and Dirk Kuckling. “Berechnung Des Materialabbaus von PP Und PS in Der Plastifiziereinheit Teil 1: Belastung Und Materialmodellierung.” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, 2016, 18.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27258
Schöppner, Volker, and M. Pohl. “First Insight into the High Speed Extrusion of Polycarbonate.” In 32nd International Conference of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27261
Schöppner, Volker, and I. Fiebig. “Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics.” International Journal of Polymer Science, no. Onlineausgabe (2016).
LibreCat
2016 | Conference Paper | LibreCat-ID: 27262
Schöppner, Volker, and I. Fiebig. “Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics.” In 69th Annual Assembly of the International Institute of Welding (IIW). Melbourne (Australien), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27263
Schöppner, Volker, and J. Trippe. “Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method.” In 32nd International Conference of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27265
Schöppner, Volker, K. Westhues, and T. Westhues. “Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders.” In 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27266
Schöppner, Volker, P. Kloke, and K. Westhues. “Modellierung Des Glasfaserlängenabbaus.” In PolyMerTec 2016. Merseburg (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27268
Schöppner, Volker, M. Hüttner, Bernd Henning, and Manuel Webersen. “Non-Destructive Characterization of Hygrothermally Aged Polymers.” In 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC). Indianapolis (USA), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27270
Schöppner, Volker, T. Herken, F. Sporkmann, and F. Platte. “Partikel Und Schmelze Im Dynamischen Netz.” Kunststoffe, 2016, 70–75.
LibreCat
2016 | Journal Article | LibreCat-ID: 27271
Moritzer, Elmar, Volker Schöppner, P. Lakemeyer, and T. Nordmeyer. “Plasmaunterstütztes Fügen von Kunststoffen.” Joining Plastics, no. 10. Jg. Heft 2 (2016): 100–108.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27272
Schöppner, Volker, A. Bagsik, and F. Knoop. “Quality Improvement of FDM Parts by Parameter Optimization.” In 32nd International Conference of the Polymer Processing Society (PPS). Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27273
Schöppner, Volker, and P. Meilwes. “Realitätsnah Und Definiert Verschmutzen.” Kunststoffe, no. 106. Jg. Heft 8 (2016): 80–84.
LibreCat
2016 | Journal Article | LibreCat-ID: 27274
Schöppner, Volker, and I. Fiebig. “Schweißen von Faserverstärkten Kunststoffen: Erhöhung Der Wirksamkeit Der Faserverstärkung in Der Schweißnaht.” Jahresmagazin Kunststofftechnik, 2016, 120–26.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27275
Schöppner, Volker, I. Fiebig, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, and D. DuQuesnay. “Several Influences during Examinations of Laser Transmission Welding - Current Status.” In 69th Annual Assembly of the International Institute of Welding (IIW). Melbourne (Australien), 2016.
LibreCat