267 Publications
2024 | Conference Abstract | LibreCat-ID: 59158
V. Schöppner and T. Arndt, “Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen,” 2024.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 59157
V. Schöppner and T. Arndt, “Anbossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen,” 2024.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 59162
V. Schöppner and T. Arndt, “Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen,” 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59135
J. P. Oldemeier and V. Schöppner, “Analysis of the Dispersive and Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle Tracking,” Polymers, vol. 16, no. 21, 2024, doi: 10.3390/polym16212952.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 59101
V. Schöppner and T. Arndt, “Development of scale-up rules for the quasi-simultaneous laser transmission welding (LTW) of thermoplastics,” in The 2nd International Symposium on Plastics Technology, 2024, vol. 355.
LibreCat
2024 | Journal Article | LibreCat-ID: 59129
V. Schöppner, D. Trienens, T. Bäck, S. Tsi-Nda Lontsi, P. Krause, and F. Budde, “Method Development for the Prediction of Melt Quality in the Extrusion Process,” Polymers, vol. 16, no. 9, p. 1197, 2024, doi: 10.3390/polym16091197.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 59134
L. Austermeier and V. Schöppner, “Load Differences between the Screws in the Solids Conveying Zone of Co-Rotating Twin-Screw Extruders,” 37th International Conference of the Polymer Processing Society, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59103
K. Gevers, V. Schöppner, A. Seefried, M. Gehde, and M. Albrecht, “Influences of the convective heating on the material damage to plastics during hot gas series welding,” Joining Plastics, vol. 18, no. 2, p. 108, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59105
K. Gevers et al., “Effects of different heating strategies on the joint properties during infrared welding of glass fiber reinforced polyamide 6,” Welding in the World, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59102
J. Decker et al., “Effects of different heating strategies on the joint properties during infrared welding of glass fiber reinforced polyamide 6,” Welding in the World, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 59140
V. Schöppner and D. Kleinschmidt, “Modifikation von Pyrolyseruß mittels Plasmaaktivierung,” 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59133
L. Austermeier and V. Schöppner, “The Potential of DEM Simulation for the Prediction of Torque Differences in the Melting Zone of Co-rotating Twin-Screw Extruders,” Book of Abstracts of the 5th Aspherix(R) & CFDEM(R) Conference, 2024, doi: 10.3217/978-3-99161-020-5.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 59104
K. Gevers, V. Schöppner, M. Albrecht, M. Gehde, and A. Seefried, “Einfluss der konvektiven Erwärmung auf die Materialschädigung von Kunststoffen beim Warmgasserienschweißen,” Joining Plastics, pp. 108–114, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 58388
L. Austermeier, F. Brüning, V. Schöppner, and A. Schlüter, “Kunststoffrecycling im Lehrangebot der Universität Paderborn ,” Kunststoffland NRW Report, no. 03/2024, pp. 24–25, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59243
V. Schöppner, F. Brüning, and F. Knaup, “Improvement in an Analytical Approach for Modeling the Melting Process in Single-Screw Extruders,” Polymers, vol. 16, no. 22, p. 3130, 2024, doi: 10.3390/polym16223130.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48672
V. Schöppner et al., “Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides,” presented at the 76th Annual Assembly of the International Institute of Welding (IIW), Singapur (Singapur), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48671
V. Schöppner et al., “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation,” Proceedings of the 2023 International Conference on Composite Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48665
V. Schöppner and T. Arndt, “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten,” Joining Plastics, no. 17, pp. 20–27, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48662
V. Schöppner and J. Petzke, “Dielectric Heating in the Vulcanization Process of Rubber Extrudates,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48751
V. Schöppner et al., “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method,” Advanced Structured Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48754
V. Schöppner, L. Austermeier, and D. Trienens, “Verbesserung der Betriebspunktauslegung durch Schneckensimulation,” Wissenschaftlicher Arbeitskreis Kunststofftechnik, pp. 62–66, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48748
J. Köllermeier and V. Schöppner, “Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48749
S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48753
V. Schöppner, M. Frank, and C. W. T. Schall, “The Wave Must Be Right,” Plastic Insights, no. 7/2023, pp. 52–54, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 48649
K. Gevers et al., “Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten,” in 11. Landshuter Leichtbau-Colloquium, 1st ed., Landshut: LC-Verlag, 2023, pp. 8–17.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48651
V. Schöppner, L. Austermeier, and A. Nordieker, “A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48660
V. Schöppner, L. Austermeier, and A. Alsoud, “Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48652
V. Schöppner et al., “Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide,” Joining Plastics, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48661
V. Schöppner and J. Petzke, “Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren,” presented at the AZuR-Kolloquium ALTREIFEN-RECYCLING, Gummersbach (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48738
V. Schöppner and D. Trienens, “Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48735
V. Schöppner, M. Frank, and C. W. T. Schall, “Hauptsache, die Wellenlänge stimmt,” Kunststoffe, no. 9/2023, pp. 76–78, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48746
V. Schöppner et al., “Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps,” KGK Kautschuk Gummi Kunststoffe, pp. 47–52, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48745
V. Schöppner, K. Gevers, M. Albrecht, and A. Seefried, “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48744
J. Petzke, D. Kleinschmidt, and V. Schöppner, “Microwave Heating of Rubber Extrudates,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48740
V. Schöppner and D. Trienens, “Investigation regarding the correlation of the relative influences during the extrusion process of cast films on the residual melt quality,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau, 2023, doi: 10.22032/dbt.58867.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48743
V. Schöppner, M. Altepeter, C. W. T. Schall, S. Wanke, and M. Kley, “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder,” Polymers, p. 10, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49740
D. Stüker and V. Schöppner, “An approach for the numerical calculation of the non-isothermal pressure-throughput-characteristics of single screw melt-extruder,” 2023, doi: 10.1063/5.0138944.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49737
H. Malatyali, V. Schöppner, and T. Hoemann, “Investigation of the influence of process and screw configurations on fiber length for recycled carbon fiber,” 2023, doi: 10.1063/5.0139631.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49734
H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw extruder using CFD-simulation,” 2023, doi: 10.1063/5.0139630.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52800
D. Stüker and V. Schöppner, “Simplified numerical calculation of the isothermal, three-dimensional, Non-Newtonian flow characteristics of single-screw melt-extruder,” presented at the PROCEEDINGS OF THE 36TH CONFERENCE OF THE POLYMER PROCESSING SOCIETY, PPS36, 2023, doi: 10.1063/5.0138943.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 31733
V. Schöppner and F. Brüning, “Calibration of a Contact Model for DEM Simulations of Grooved Feed Sections of Single Screw Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS-36), Montreal (Kanada), 2023, doi: 10.1063/5.0135858.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34748
S. Vogtschmidt and V. Schöppner, “The short-and long-term properties of welded high-temperature-resistant thermoplastics,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2023, doi: 10.1007/s40194-023-01595-3.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52801
M. Altepeter, S. Wanke, and V. Schöppner, “Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” 2023, doi: 10.1063/5.0135824.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48750
V. Schöppner, M. Altepeter, L. Austermeier, S. Wanke, and P. Meinheit, “Polypropylene Degradation on Co-Rotating Twin-Screw Extruders,” Polymers 2023, no. 15(9), p. 2181, 2023, doi: 10.3390/polym15092181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34736
V. Schöppner and M. Frank, “Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as well as Pressure Throughput Behavior,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2023, doi: 10.1063/5.0135825.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 29946
C. W. T. Schall and V. Schöppner, “Design of a test bench for measuring the degradation behavior of plastics during processing,” presented at the PPS36, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48742
V. Schöppner and C. W. T. Schall, “Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior,” Materials, no. 16(17), p. 5891, 2023, doi: 10.3390/ma16175891.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48659
D. Trienens, V. Schöppner, and R. Bunse, “Determination of Correlations between Melt Quality and the Screw Performance Index in the Extrusion Process,” Polymers 2023, 2023, doi: https://doi.org/10.3390/polym15163427.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48737
V. Schöppner and D. Kleinschmidt, “Improvement of a method for the correction of wall slip effects within the rheological measurements of filled rubber compounds,” SPE Polymers, pp. 1–17, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 52833
V. Schöppner, L. Austermeier, F. Brüning, J. P. Oldemeier, and O. Brandt, “Recycling-Ansatz für mehrkomponentige Kunststoffprodukte durch thermische Verbundtrennung,” EXTRUSION, no. 8/2023, pp. 56–59, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52840
V. Schöppner and T. Arndt, “Anvil-free ultrasonic welding for welding situations with one sided access,” 2023.
LibreCat
2022 | Journal Article | LibreCat-ID: 29947
C. W. T. Schall and V. Schöppner, “Measurement of material degradation in dependence of shear rate, temperature, and residence time,” Polymer Engineering and Science, vol. 62, no. 3, pp. 815–823, 2022, doi: 10.1002/pen.25887.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 34723
V. Schöppner, K. Gevers, L. Schraa, and P. Töws, “Auswirkungen unterschiedlicher Erwärmstrategien auf die quasistatische und zyklische Belastbarkeit von infrarotgeschweißten, glasfaserverstärkten Thermoplastbauteilen,” Joining Plastics, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34717
V. Schöppner, F. Brüning, and L. Sommer, “A Reverse Engineering Approach for Calibrating Frictional Behavior of Contact Models for Numerical Simulation of Solids Conveying in Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PSS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34722
V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Auswirkungen des Vorscherungseinflusses im Extrusionsprozess auf die rheologischen Kennwerte gefüllter Kautschukmischungen,” GAK, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34721
V. Schöppner, M. Dörner, M. Frank, and C. W. T. Schall, “Auf der Welle zum Mischerfolg,” Kunststoffe, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34730
V. Schöppner and D. Kleinschmidt, “Estimation and correction of non-isothermal effects of carbon black-filled rubber compounds in viscosity measurements,” presented at the 14th Rubber Fall Colloquium (KHK), Hannover, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34738
V. Schöppner et al., “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” presented at the 31. Internationales Kolloquium Kunststofftechnik, Aachen, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34735
V. Schöppner and F. Brüning, “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34734
V. Schöppner and J. Köllermeier, “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34737
V. Schöppner and M. Frank, “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34740
V. Schöppner, M. Altepeter, and S. Wanke, “Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34752
V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen,” GAK, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33090
K. Gevers, A. Tornede, M. D. Wever, V. Schöppner, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,” Welding in the World, 2022, doi: 10.1007/s40194-022-01339-9.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34727
V. Schöppner, J. Köllermeier, G. Hiesgen, and J. Trippe, “Development of Simulation Based Assistant Systems for Automatic Process Monitoring and Derivation of Recommendations to Optimize a Profile Extrusion Line,” presented at the 2nd International Symposium on Plastics Technology, Aachen, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34720
V. Schöppner and J. Köllermeier, “Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34726
V. Schöppner and J. Köllermeier, “Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles,” presented at the Annual Conference of the Society of Plastics Engineers (ANTEC 2022), Charlotte, 2022.
LibreCat
2022 | Book | LibreCat-ID: 48356
V. Schöppner and S. Vogtschmidt, Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Koblenz, 2022, pp. 534–540.
LibreCat
2022 | Book | LibreCat-ID: 48358
V. Schöppner, M. Dörner, M. Frank, and C. Schall, On the Wave to Successful Mixing. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,” Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi: 10.3390/polym14153113.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29948
F. Brüning and V. Schöppner, “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders,” Polymers 14, 2022, doi: https://doi.org/10.3390/polym14020256.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34708
V. Schöppner, K. Gevers, A. Tornede, M. Wever, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,” Welding in the World, p. 14, 2022.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24372
K. Gevers and V. Schöppner, “Lebensdauer vorhersagen?,” K-Zeitung, no. 1–2.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
K. Gevers, V. Schöppner, and E. Hüllermeier, “Heated tool butt welding of two different materials – Established methods versus artificial intelligence,” presented at the International Institute of Welding, online, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
T. Arndt and V. Schöppner, “Development of scale up rules for quasi-simultaneous laser transmission welding of thermoplastics,” presented at the International institute of welding, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24441
M. Frank and V. Schöppner, “DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26630
M. Altepeter, V. Schöppner, and S. Wanke, “Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23839
C. Marschik, W. Roland, M. Döner, G. Steinbichler, and V. Schöppner, “A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion,” Polymers, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23867
M. Bialaschik, V. Schöppner, M. Albrecht, and M. Gehde, “Influence of material degradation on weld seam quality in hot gas butt welding of polyamides,” Welding in the World, pp. 1161–1169, 2021, doi: 10.1007/s40194-021-01108-0.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 31758
V. Schöppner and J. H. Martens, “Eine runde Sache,” Kunststoffe, pp. 91–93, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31776
V. Schöppner and K. Gevers, “ Lebensdauer vorhersagen?,” K-Zeitung, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31777
V. Schöppner, M. Altepeter, and S. Wanke, “Material Degradation of Polypropylene on the Co-Rotating Twin Screw Extruder,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Melbourne (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31782
V. Schöppner and D. Kleinschmidt, “Viskoelastische Materialmodellierung in Strömungssimulationen,” presented at the 27. Techomer - Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Online) , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31785
V. Schöppner, M. Albrecht, M. Gehde, and M. O. Bialaschik, “Warmgasstumpfschweißen - Einfluss des Werkzeugdesigns und des verwendeten Prozessgases auf das Erwärm- und Schweißverhalten,” presented at the Technomer, Chemnitz (Deutschland), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31784
V. Schöppner, M. Dörner, and C. W. T. Schall, “Vorteilhaftes Prozessverhalten von Wave-Schnecken in der Einschneckenextrusion,” presented at the Technomer 2021, Chemnitz, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31786
V. Schöppner, M. O. Bialaschik, M. Albrecht, and M. Gehde, “Warmgasstumpfschweißen von Kunststoffen,” Joining Plastics, pp. 162–169, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31719
V. Schöppner and S. Vogtschmidt, “ Analyse des Erwärm- und Umstellverhaltens beim Schweißen von hochtemperaturbeständigen Kunststoffen,” presented at the DVS CONGRESS, digital, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31730
V. Schöppner and S. Vogtschmidt, “ Anwendungsorientiertes Schweißen von hochtemperaturbeständigen Kunststoffen,” presented at the Technomer, Deutschland (digital), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31750
J. Köllermeier and V. Schöppner, “Development of a Dynamic Strategy to Determine the Optimal Barrel Temperature of Single Screw Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24442
M. Frank, V. Hollenhorst, and V. Schöppner, “Investigation of the pressure-throughput behavior of different faceted mixer geometries on an analytical and simulative basis ,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23835
M. Dörner and V. Schöppner, “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts,” presented at the ANTEC 21, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24383
A. Wübbeke et al., “Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples ,” Polymers, 2021.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24133
V. Schöppner, L. Austermeier, and K. Dietl, “Der richtige Dreh für Simulationen,” Blasformen & Extrusionswerkzeuge, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24134
V. Schöppner, L. Austermeier, and K. Dietl, “SKZ simuliert Doppelschnecke,” K Zeitung, 2020.
LibreCat
2020 | Misc | LibreCat-ID: 24204
V. Schöppner, M. Dörner, and C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION. 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24207
V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, and G. Steinbichler, “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion),” Polymers, no. 12(9), p. 1900, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24231
V. Schöppner, M. Dörner, C. Marschik, and G. Steinbichler, “Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws,” Polymers, p. 946, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24312
S. Vogtschmidt, I. Fiebig, and V. Schöppner, “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien,” Joining Plastics, no. 3–4, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24318
S. Vogtschmidt and V. Schöppner, “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien,” in DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 2020, vol. 365.
LibreCat
2020 | Journal Article | LibreCat-ID: 24321
S. Vogtschmidt and V. Schöppner, “Vibration welding of components with angled areas in the direction of vibration,” Welding in the World, vol. 64, pp. 1843–1853, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24324
S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, no. 3–4, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24385
T. Arndt and V. Schöppner, “Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen von Thermoplasten,” Joining Plastics, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24386
T. Arndt and V. Schöppner, “Wenn Regeln Potenziale freisetzen,” K-Zeitung, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24387
T. Arndt and V. Schöppner, “Quasi-Simultaneous Laser Transmission Welding,” PhotonicsViews, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24471
V. Schöppner and M. Bialaschik, “Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides,” presented at the 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23861
M. Altepeter and V. Schöppner, “Materialabbau im Doppelschneckenextruder,” Kunststoffe, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23865
V. Schöppner and F. Brüning, “Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations,” in Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23868
M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden,” DVS CONGRESS 2020 - Große Schweißtechnische Tagung, vol. 365, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23873
M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Hot gas welding – Influences of the tool design,” presented at the PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, Pretoria, 2020, doi: 10.1063/5.0029478.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 24245
V. Schöppner et al., “Investigation of residual stresses of hot plate welding,” presented at the 73rd Annual Assembly of the International Institute of Welding (IIW), Marina Bay (Singapore), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24236
V. Schöppner et al., “Selected Aspects for the Assessment of Laser Transmission Welding,” Joining Plastics, pp. 30–35, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24472
V. Schöppner et al., “LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS,” presented at the ANTEC20, Texas (USA), 2020.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25617
V. Schöppner and F. Sporkmann, “Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation,” presented at the 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25622
V. Schöppner and M. Dörner, “COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25623
V. Schöppner and V. Resonnek, “DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25627
V. Schöppner and K. Westhues, Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern. Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25628
V. Schöppner and J. Walter, “Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 1,” GAK-Gummi Fasern Kunststoffe, p. S. 152-159, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25629
V. Schöppner and J. Walter, “Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 2,” GAK Gummi Faser Kunststoffe, pp. 206–213, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25633
V. Schöppner and V. Resonnek, “Extruder optimier dich!,” Kunstsstoffe, pp. 56–61, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25634
V. Schöppner, “Grundlagen der Haftung in der Grenzfläche beim Kunststoffschweißprozess,” presented at the VDI Wissensforum - Schweißen von Kunststoffen, Paderborn (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 24326
S. Vogtschmidt and V. Schöppner, “Vibration welding of components with angled areas in the direction of vibration,” presented at the 72nd Assembly of the International Institute of Welding (IIW), Bratislava, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25736
V. Schöppner, H. Bayazian, and A. Yadegari, “Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25737
V. Schöppner, F. Sporkmann, and A. Heide, “New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method,” presented at the 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25746
V. Schöppner, H. Bayazian, A. Yadegari, and H. Haddad, “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” presented at the 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25750
V. Schöppner and F. Sporkmann, “Scale up von Doppelschneckenmaschinen,” presented at the VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25751
V. Schöppner, P. Meilwes, and K. Westhues, Schmelzefilter. Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25753
V. Schöppner and F. Sporkmann, “Simulation aids compounding success,” Compounding World, pp. 47–56, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25754
V. Schöppner and F. Brüning, “Simulation der Feststoffförderung im Einschneckenextruder,” WAK Jahresmagazin, pp. 64–67, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25759
V. Schöppner and K. Westhues, “Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern,” presented at the VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 23866
V. Schöppner and F. Brüning, “Simulation der Feststoffförderung im Einzug von Einschneckenextrudern,” WAK Jahresmagazin, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 23879
M. Albrecht, M. Gehde, M. Bialaschik, and V. Schöppner, “Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen,” presented at the Technomer 2019 - 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22027
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 25619
V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, and G. Steinbichler, “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).,” Polymers, pp. 1488–1515, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 44308
H. Bayazian, V. Schöppner, A. Yadegari , and H. Haddad , “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” presented at the 35th PPS , Türkei , 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25641
V. Schöppner et al., “Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie,” presented at the Werkstoffwoche (2019), Dresden (Deutschland), 2019.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26929
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26934
V. Schöppner, F. Sporkmann, and J. Markarian, “Building the Perfect Model,” Compounding World, no. Onlineausgabe März, pp. 31–40, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26935
V. Schöppner and P. Meilwes, “CAD-Datenerzeugung zur Druckverlustsimulation von Filtermedien,” Konstruktion, vol. 70. Jg. Heft 11, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26940
V. Schöppner and K. Westhues, “Differenzierte Betrachtung der Energieeinträge in Feststoffförder- und Aufschmelzzone gleichläufiger Doppelschneckenextruder,” presented at the VDI Wissensforum, Leverkusen (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26944
V. Schöppner, H. Bayazian, A. Yadgari, J. Morshedian, A. Jamshidi, and M. Razavi-Nouri, “Evaluation of Morphology and Crystallinity of Biaxially Oriented PP Films,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26945
V. Schöppner and I. Fiebig, “Evaluation of the Elongation Ability of Polymer Melts for the Extension of the Design Freedom in Vibration Welding,” presented at the 71st Annual Assembly of the International Institute of Welding (IIW), Bali (Indonesien), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26947
V. Schöppner and J. Fiebig, “Factors Influencing the Fiber Orientation in Welding of Fiber-Reinforced Thermoplastics,” Welding in the World, vol. 62. Jg., no. Heft 5, pp. 997–1012, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26950
V. Schöppner and I. Fiebig, “Influence of Fiber Orientation and Weld Position in Welding Injection-Molded Fiber-Reinforced Thermoplastics,” Welding in the World, vol. 62, no. 6, pp. 1301–1309, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26952
V. Schöppner and H. Bayazian, “Investigation of Molecular Weight Distributions during Extrusion Process of Polypropylene by Rheometry Experiment,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26955
V. Schöppner, C. Schumacher, and C. Fels, “Materialentwicklung für FLM,” presented at the WAK-Symposium, Bayreuth (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26956
V. Schöppner, C. Schumacher, and C. Fels, “Materialschwindung und Verzug im FDM-Prozess,” presented at the DVM Tagung - Additiv gefertigte Bauteile und Strukturen, Berlin (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26957
V. Schöppner and J. Trippe, “Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds,” International Polymer Processing, vol. 33, no. 4, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26958
V. Schöppner and J. Trippe, “Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26959
V. Schöppner and P. Meilwes, “Modelling the Contamination Behavior of Polymer Melt Filters and Pressure Loss Simulations of Filtration Media,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26960
V. Schöppner, H. Bayazian, M. Hopp, and A. Yadegari, “Molecular Weight Distribution Prediction of Rheology against Gel Permeation Chromatography for Film Grade Polypropylene,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26962
V. Schöppner and F. Sporkmann, “New Method to Analyze the Throughput-Pressure Behavior with the Corrected Twin Screw Channel Geometry and the Induced Drag Flow of Screw Elements by Using 3D FEM Simulation,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26964
V. Schöppner, C. Schumacher, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” presented at the 29th Annual International Solid Freeform Fabrication Symposium (SFF) - An Additive Manufacturing Conference, Austin (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26965
V. Schöppner and J. Walter, “Scale-Up of Garvey-Die Test Setup,” presented at the 13. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26966
V. Schöppner and J. Walter, “Scale-Up Regeln für Kautschukstiftextruder, Ansätze auf Basis einer konstanten Mischgüte,” presented at the Deutsche Kautschuk-Tagung (DKT 2018), Nürnberg (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26967
V. Schöppner and I. Fiebig, “Schweißnahtfestigkeit von Sandwichbauteilen mit einer glasfaserverstärkten Kernkomponente,” Joining Plastics, vol. 12, no. 2, pp. 87–93, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26968
V. Schöppner and V. Resonnek, “Self-Optimizing Barrel Temperature Setting Control of Single Screw Extruders for Improving the Melt Quality,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22020
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22046
F. Knoop and V. Schöppner, “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process,” in SPE ANTEC 2018, 2018, vol. 1, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 26954
V. Schöppner, M. Schadomsky, and D. Stüker, “Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity,” presented at the Deutsche Kautschuk-Tagung (DKT 2018), Nürnberg (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26943
V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, and D. Zimmer, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion, vol. 70. Jg. Heft 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26930
V. Schöppner, D. Zimmer, F. Knoop, and T. Lieneke, “Additive Fertigung nach Maß,” Kunststoffe, vol. 108. Jg. Heft 6, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26932
V. Schöppner, P. Lakemeyer, B. Geißler, T. Laumer, A. Wübbeke, and T. Frick, “Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths,” Journal of Laser Applications, vol. 30. Jg., 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26933
V. Schöppner, A. Wübbeke, B. Geißler, T. Laumer, T. Frick, and M. Schmidt, “Analysis of the weld seam morphology of polypropylene in laser transmission welding,” Manuf. Sci. Eng, p. 140(11), 2018.
LibreCat
2017 | Journal Article | LibreCat-ID: 27202
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, p. S. 108-114, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27205
V. Schöppner, H. Bayazian, F. Reinders, and C. Goebel, “Degradation of Bimodal Distribution Polypropylene and Polyethylene during the Extrusion Process,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27207
V. Schöppner and K. Westhues, “Differenzierte Betrachtung der Energieeinträge in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder,” presented at the 43. Deutsche Compoundiertagung, Nürnberg (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27208
V. Schöppner and J. Walter, “Distinction of Measurement-Related and Material-Related Scattering of the Young’s Modulus in Thermoplastics while Measuring by Quasi-Static Tensile Testing,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27210
V. Schöppner, K. Westhues, R. Weinlein, and A. Knieper, “Energieeintrag in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27213
V. Schöppner, F. Reinders, M. Müller-Roosen, S. Dill, and A. Kaya, “Entwicklung einer unweltverträglichen und unbedenklichen flammgeschützten Polyethylen-Blasfolie,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27214
V. Schöppner and J. Trippe, “Feststoff effizienter fördern,” Kunststoffe, pp. 47–52, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27216
V. Schöppner and P. Meilwes, “Filterverschmutzung berechenbar machen,” Kunststoffe, no. 107. Jg. Heft 8, pp. 58–61, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27217
V. Schöppner and M. Pohl, “High Speed Extrusion of Modified Polycarbonate,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27221
V. Schöppner and V. Resonnek, “Investigation of the Barrel Temperature Profile on the Process Behavior of Single Screw Extruders and Strategies to Determine the Optimal Temperature Control,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27222
V. Schöppner and K. Westhues, “Investigation of the Temperature Development within the Solid Conveying Zone of Twin-Screw Extruder Based on the Discrete Element Method (DEM),” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27226
V. Schöppner and P. Lakemeyer, “Laser Transmission Welding of Automotive Head Lamps without Clamping Tool,” Welding in the World, no. Onlineausgabe, pp. 589–602, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27227
V. Schöppner, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, and D. DuQuesnay, “Matching of Laser Intensity Distribution for Laser Transmission Welding of Thermoplastics,” Welding in the World, no. Onlineausgabe, pp. 1247–1252, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27228
V. Schöppner et al., “Mehrschichtaufbau zur Verbesserung der mechanischen Eigenschaften von ökologisch unbedenklichen Flammschutzfolien,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27231
V. Schöppner and J. Trippe, “Modeling of the Solid Throughput and Pressure Build-Up of Single Screw Smooth Barrel Extruders under Consideration of the Backpressure and High Screw Speeds,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27232
V. Schöppner and F. Reinders, “Modellierung des Reckprozesses von mono- und biaxial verstreckten Polypropylenfolien,” presented at the Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27233
V. Schöppner and P. Meilwes, “Modelling the Contamination Behaviour of Polymer Melt Filters,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27234
V. Schöppner and F. Reinders, “Modelling the Monoaxial Stretching of Polypropylene Films by a Nonlinear Spring Dashpot,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27235
V. Schöppner and F. Reinders, “Modelling the Stretching of Polypropylene Films by a Nonlinear Spring Dashpot Model,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27236
V. Schöppner, I. Fiebig, and P. Lakemeyer, “Opportunities in Welding of Fiber-Reinforced Thermoplastics for Different Weld Positions in Injection-Molded Parts,” presented at the 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27237
V. Schöppner and H. Westhues, “Phänomenorientierte Untersuchung der Feststoffförderzonen gleichläufiger Doppelschneckenextruder mithilfe der DEM-Simulation,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, no. 13. Jg. Heft 3, pp. 196–211, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27238
V. Schöppner and I. Fiebig, “Potentiale zur Erhöhung der Schweißnahtfestigkeit faserverstärkter Thermoplaste,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27240
V. Schöppner and K. Westhues, “Simulation von Doppelschneckenextrudern - Einblicke in das Gemeinschaftsforschungsprojekt SIGMA,” presented at the 12. Würzburger Compoundiertage, Würzburg (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27241
V. Schöppner and P. Lakemeyer, “Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics,” presented at the 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27242
V. Schöppner, P. Lakemeyer, and F. Reinders, “Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22042
C. Schumacher, V. Schöppner, and J. Guntermann, “Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 470–484, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22045
F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22049
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, vol. 1, no. 1, pp. 108–114, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22033
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), pp. 563–568, 2017, doi: 10.1007/s11837-016-2197-2.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22023
F. Knoop, A. Kloke, and V. Schöppner, “Quality Improvement of FDM Parts by Parameter Optimization ,” in 32nd International Conference of the Polymer Processing Society, 2017, vol. 32, doi: 10.1063/1.5016790.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 27201
V. Schöppner, M. Schadomsky, and J. Walter, “Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27220
V. Schöppner, P. Lakemeyer, A. Wübbeke, S. Geißler, and M. Schmidt, “Investigation of Residual Stress in Laser Transmission Welding of Polypropylene,” presented at the 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27245
V. Schöppner, K. Westhues, and T. Westhues, “A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27248
V. Schöppner, S. Brockhaus, C. Penner, and J. Möckel, “Auswirkungen von Betriebsparametern in der Heißluftvulkanisation,” GAK Gummi Fasern Kunststoffe, no. 69. Jg. Heft 7, pp. 410–413, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27249
V. Schöppner, S. Littek, A. Döring, and D. Kuckling, “Berechnung des Materialabbaus von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, p. 18, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27258
V. Schöppner and M. Pohl, “First Insight into the High Speed Extrusion of Polycarbonate,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27261
V. Schöppner and I. Fiebig, “Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics,” International Journal of Polymer Science, no. Onlineausgabe, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27262
V. Schöppner and I. Fiebig, “Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27263
V. Schöppner and J. Trippe, “Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27265
V. Schöppner, K. Westhues, and T. Westhues, “Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27266
V. Schöppner, P. Kloke, and K. Westhues, “Modellierung des Glasfaserlängenabbaus,” presented at the PolyMerTec 2016, Merseburg (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27268
V. Schöppner, M. Hüttner, B. Henning, and M. Webersen, “Non-Destructive Characterization of Hygrothermally Aged Polymers,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27270
V. Schöppner, T. Herken, F. Sporkmann, and F. Platte, “Partikel und Schmelze im dynamischen Netz,” Kunststoffe, pp. 70–75, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27271
E. Moritzer, V. Schöppner, P. Lakemeyer, and T. Nordmeyer, “Plasmaunterstütztes Fügen von Kunststoffen,” Joining Plastics, no. 10. Jg. Heft 2, pp. 100–108, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27272
V. Schöppner, A. Bagsik, and F. Knoop, “Quality Improvement of FDM Parts by Parameter Optimization,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27273
V. Schöppner and P. Meilwes, “Realitätsnah und definiert verschmutzen,” Kunststoffe, no. 106. Jg. Heft 8, pp. 80–84, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27274
V. Schöppner and I. Fiebig, “Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht,” Jahresmagazin Kunststofftechnik, pp. 120–126, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27275
V. Schöppner et al., “Several Influences during Examinations of Laser Transmission Welding - Current Status,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27277
V. Schöppner, F. Evers, and P. Lakemeyer, “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials,” Welding in the World, no. Onlineausgabe, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22019
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi: 10.1007/s11837-016-2197-2.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22039
M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 121–133, doi: 10.3139/9783446450608.010.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 27247
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden,” KGK Kautschuk Gummi Kunststoffe, no. 69. Jg. Heft 4, pp. 30–36, 2016.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27296
V. Schöppner, N. Fecke, and T. Herken, “Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern,” Jahresmagazin Kunststofftechnik, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27300
V. Schöppner, F. Reinders, W. Bremser, and E. Sabanov, “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27301
V. Schöppner and J. Leßmann, “Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27303
V. Schöppner and S. Brockhaus, “Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion,” GAK Gummi Fasern Kunststoffe, vol. 68, no. 7, pp. 470–474, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27305
V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds,” KGK Kautschuk Gummi Kunststoffe, vol. 68, no. 7–8, pp. 46–58, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27306
V. Schöppner, T. Herken, and M. Hüttner, “Influence of the Screw Clearances on the Pressure Build-Up,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27308
V. Schöppner, M. Schadomsky, and C. Hopmann, “Investigations of the Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27310
V. Schöppner and P. Lakemeyer, “Laser Transmission Welding of Automotive Headlamps without Clamping Tool,” presented at the GNS8 - International Conference on Thermoplastics Joining, Genua (Italien), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27311
V. Schöppner and P. Lakemeyer, “Laser Transmission Welding of Automotive Headlamps without Clamping Tool,” presented at the 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27314
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the Deutsche Kautschuk-Tagung (DKT 2015), Nürnberg (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27315
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the Science meets Tires, Aachen (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27318
V. Schöppner and J. Leßmann, “Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk,” presented at the 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27319
V. Schöppner and J. Leßmann, “Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk,” presented at the 15th Annual International Polymer Colloquium (IPC), Madison (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27320
V. Schöppner, T. Herken, M. Pohl, and K. Westhues, “Process Optimization – A New Model for Calculation of the Axial Temperature Curve for Twin-Screw Extruders,” presented at the 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27321
V. Schöppner, T. Herken, and M. Hüttner, “Druckaufbau auf gleichläufigen Doppelschneckenextrudern - Theoretische Grundlagen, Herausforderungen und Energiebilanz,” Prozessoptimierung an Compoundieranlagen, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27322
V. Schöppner, B. Henke, and F. Reinders, “Study to Validate the Characterization of Cross Flow Behavior in a Flat Film Die with Rectangular Cross Section,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27325
V. Schöppner and P. Lakemeyer, “Transferbility of Investigation Results for Laser Transmission Welding,” presented at the 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27329
V. Schöppner, N. Fecke, and T. Herken, “Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22031
F. Knoop and V. Schöppner, “Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30,” in ASPE Spring Topical Meeting, 2015, pp. 26–31, doi: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22044
F. Knoop and V. Schöppner, “Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 935–948, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 27331
V. Schöppner, N. Fecke, and T. Herken, “Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27332
V. Schöppner and S. Littek, “Berechnung des Materialabbaus von Thermoplasten während des Plastifiziervorgangs,” presented at the PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27334
V. Schöppner and F. Reinders, “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood,” presented at the Biobased materials 2014 - 10th Congress for Biobased Materials, Fellbach (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27337
V. Schöppner, T. Herken, F. Reinders, and K. Westhues, “Simulation des Compoundiervorgangs im Doppelschneckenextruder, Modellierung - Simulation - Auslegung,” presented at the Erfolgreich Compoundieren mit Pulvern und Stäuben, Düsseldorf (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27338
V. Schöppner, N. Fecke, and T. Herken, “Experimental Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27341
V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Grundlegende Studie und alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen,” KGK Kautschuk Gummi Kunststoffe, vol. 67, no. 11–12, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27342
V. Schöppner and N. Böhm, “Herausforderungen bei der Verwendung von Wood-Plastic-Composites(WPC) im Automobilinnenbereich,” presented at the 16th Workshop Odour and Emissions of Plastic Materials, Kassel (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27344
V. Schöppner and B. Henke, “Illustration of Cross Flows of Polystyrene Melts Through a Coat-Hanger Die,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27346
V. Schöppner and F. Evers, “Influence of Flame Retardant Material on the Weld Strength of Plastic Parts,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27348
V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Investigations about High-Speed Rubber Extrusion,” presented at the 11. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27349
V. Schöppner and S. Littek, “Measurement and Calculation of the Material Degradation of Polystyrene and Modeling of the Degradation by using REX,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27354
V. Schöppner, M. Schadomsky, and F. Lemke, “Optimisation of the Mixing Behaviour of Rubber Pin-Type Extruders,” presented at the 11. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27356
V. Schöppner and A. Wibbeke, “Production of Graded Structures in Films,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27357
V. Schöppner and A. Wibbeke, “Stretching of Polycarbonate,” presented at the 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27360
V. Schöppner, F. Evers, and P. Lakemeyer, “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials,” presented at the 67th Annual Assembly of the International Institute of Welding (IIW), Seoul (Südkorea), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27361
V. Schöppner and J. Leßmann, “Validation of Discrete Element Simulations in the Field of Solids Conveying in Single-screw Extruders,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27363
V. Schöppner, N. Böhm, and F. Reinders, “WPC: Compoundierung und Rezepturen,” presented at the WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22018
M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 923–934, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22030
M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling,” in ANTEC, 2014, pp. 2331–2336.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22021
A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling,” in 29th International Conference of the Polymer Processing Society, 2014, vol. 29, pp. 696–701, doi: 10.1063/1.4873874.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22017
M. Fischer and V. Schöppner, “Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling,” in 24th Annual International Solid Freeform Fabrication Symposium, 2013, vol. 24, pp. 805–815, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22016
A. Bagsik, V. Schöppner, and E. Klemp, “Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 629–640, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22164
A. Bagsik, V. Schöppner, and E. Klemp, “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in 1st International Conference on Thermo-Mechanically Graded Materials, 2012, vol. 1, pp. 129–134.
LibreCat
2012 | Conference Paper | LibreCat-ID: 22024
A. Bagsik, V. Schöppner, and E. Klemp, “Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085,” in 5th International Conference on Polymer and Mould Innovations, 2012, vol. 5, pp. 266–272, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 22029
A. Bagsik and V. Schöppner, “Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in ANTEC, 2011, pp. 1294–1298, doi: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.
LibreCat
| DOI
2010 | Conference Paper | LibreCat-ID: 23858
N. Kretzschmar and V. Schöppner, “Simulating Tightly Intermeshing, Co-Rotating Twin Screw Extruders with SIGMA,” in Proceedings of the 2010 Summer Computer Simulation Conference, 2010, pp. 133–140.
LibreCat
2010 | Conference Paper | LibreCat-ID: 22050
A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with ULTEM 9085,” 2010, doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 25092
D. Bonefeld, V. Schöppner, H. Potente, R. Mahnken, and A. Shaban, “Residual stresses in the quasi-simultaneous laser transmission welding of amorphous thermoplastics,” Polymer Engineering & Science, pp. 1520–1526, 2010, doi: 10.1002/pen.21685.
LibreCat
| DOI
267 Publications
2024 | Conference Abstract | LibreCat-ID: 59158
V. Schöppner and T. Arndt, “Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen,” 2024.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 59157
V. Schöppner and T. Arndt, “Anbossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen,” 2024.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 59162
V. Schöppner and T. Arndt, “Ambossfreies Ultraschallschweißen für nur einseitig zugängliche Schweißsituationen,” 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59135
J. P. Oldemeier and V. Schöppner, “Analysis of the Dispersive and Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle Tracking,” Polymers, vol. 16, no. 21, 2024, doi: 10.3390/polym16212952.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 59101
V. Schöppner and T. Arndt, “Development of scale-up rules for the quasi-simultaneous laser transmission welding (LTW) of thermoplastics,” in The 2nd International Symposium on Plastics Technology, 2024, vol. 355.
LibreCat
2024 | Journal Article | LibreCat-ID: 59129
V. Schöppner, D. Trienens, T. Bäck, S. Tsi-Nda Lontsi, P. Krause, and F. Budde, “Method Development for the Prediction of Melt Quality in the Extrusion Process,” Polymers, vol. 16, no. 9, p. 1197, 2024, doi: 10.3390/polym16091197.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 59134
L. Austermeier and V. Schöppner, “Load Differences between the Screws in the Solids Conveying Zone of Co-Rotating Twin-Screw Extruders,” 37th International Conference of the Polymer Processing Society, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59103
K. Gevers, V. Schöppner, A. Seefried, M. Gehde, and M. Albrecht, “Influences of the convective heating on the material damage to plastics during hot gas series welding,” Joining Plastics, vol. 18, no. 2, p. 108, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59105
K. Gevers et al., “Effects of different heating strategies on the joint properties during infrared welding of glass fiber reinforced polyamide 6,” Welding in the World, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59102
J. Decker et al., “Effects of different heating strategies on the joint properties during infrared welding of glass fiber reinforced polyamide 6,” Welding in the World, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 59140
V. Schöppner and D. Kleinschmidt, “Modifikation von Pyrolyseruß mittels Plasmaaktivierung,” 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59133
L. Austermeier and V. Schöppner, “The Potential of DEM Simulation for the Prediction of Torque Differences in the Melting Zone of Co-rotating Twin-Screw Extruders,” Book of Abstracts of the 5th Aspherix(R) & CFDEM(R) Conference, 2024, doi: 10.3217/978-3-99161-020-5.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 59104
K. Gevers, V. Schöppner, M. Albrecht, M. Gehde, and A. Seefried, “Einfluss der konvektiven Erwärmung auf die Materialschädigung von Kunststoffen beim Warmgasserienschweißen,” Joining Plastics, pp. 108–114, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 58388
L. Austermeier, F. Brüning, V. Schöppner, and A. Schlüter, “Kunststoffrecycling im Lehrangebot der Universität Paderborn ,” Kunststoffland NRW Report, no. 03/2024, pp. 24–25, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 59243
V. Schöppner, F. Brüning, and F. Knaup, “Improvement in an Analytical Approach for Modeling the Melting Process in Single-Screw Extruders,” Polymers, vol. 16, no. 22, p. 3130, 2024, doi: 10.3390/polym16223130.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48672
V. Schöppner et al., “Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides,” presented at the 76th Annual Assembly of the International Institute of Welding (IIW), Singapur (Singapur), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48671
V. Schöppner et al., “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation,” Proceedings of the 2023 International Conference on Composite Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48665
V. Schöppner and T. Arndt, “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten,” Joining Plastics, no. 17, pp. 20–27, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48662
V. Schöppner and J. Petzke, “Dielectric Heating in the Vulcanization Process of Rubber Extrudates,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48751
V. Schöppner et al., “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method,” Advanced Structured Materials, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48754
V. Schöppner, L. Austermeier, and D. Trienens, “Verbesserung der Betriebspunktauslegung durch Schneckensimulation,” Wissenschaftlicher Arbeitskreis Kunststofftechnik, pp. 62–66, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48748
J. Köllermeier and V. Schöppner, “Optimizing the Processing Performance of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental Data,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48749
S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48753
V. Schöppner, M. Frank, and C. W. T. Schall, “The Wave Must Be Right,” Plastic Insights, no. 7/2023, pp. 52–54, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 48649
K. Gevers et al., “Einfluss von Infrarotschweißprozessparametern auf die quasistatische und zyklische Belastbarkeit von technischen glasfaserverstärkten Thermoplasten,” in 11. Landshuter Leichtbau-Colloquium, 1st ed., Landshut: LC-Verlag, 2023, pp. 8–17.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48651
V. Schöppner, L. Austermeier, and A. Nordieker, “A NEW APPROACH FOR THE LOCAL DETERMINATION OF ENERGY INPUT IN CO-ROTATING TWIN SCREW EXTRUDERS BASED ON SCREW TORSION,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48660
V. Schöppner, L. Austermeier, and A. Alsoud, “Development Of An Asymmetric Torque Model For The Two Screws Of A Twin Screw Extruder,” presented at the 38th International Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48652
V. Schöppner et al., “Auswirkungen unterschiedlicher Erwärmstrategien auf infraroterwärmte Polyphthalamide,” Joining Plastics, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48661
V. Schöppner and J. Petzke, “Devulkanisation schwefelvernetzender Elastomere im halbleitergestützten Mikrowellenverfahren,” presented at the AZuR-Kolloquium ALTREIFEN-RECYCLING, Gummersbach (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48738
V. Schöppner and D. Trienens, “Investigation of the influence of screw geometry on the resulting melt quality for cast film extrusion,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48735
V. Schöppner, M. Frank, and C. W. T. Schall, “Hauptsache, die Wellenlänge stimmt,” Kunststoffe, no. 9/2023, pp. 76–78, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48746
V. Schöppner et al., “Optimisation of the Simulation of Rubber Extrusion dies by means of the Integration of empirically determined characteristic Maps,” KGK Kautschuk Gummi Kunststoffe, pp. 47–52, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48745
V. Schöppner, K. Gevers, M. Albrecht, and A. Seefried, “Mischmaterialschweißen von PC/ABS und PMMA beim Warmgasstumpfschweißen mit Runddüsen,” presented at the 28. Technomer, Chemnitz (Deutschland), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48744
J. Petzke, D. Kleinschmidt, and V. Schöppner, “Microwave Heating of Rubber Extrudates,” presented at the 38th International Conference of the Polymer Processing Society, St. Gallen (Schweiz), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48740
V. Schöppner and D. Trienens, “Investigation regarding the correlation of the relative influences during the extrusion process of cast films on the residual melt quality,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau, 2023, doi: 10.22032/dbt.58867.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48743
V. Schöppner, M. Altepeter, C. W. T. Schall, S. Wanke, and M. Kley, “Material-Preserving Extrusion of Polyamide on a Twin-Screw Extruder,” Polymers, p. 10, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 49740
D. Stüker and V. Schöppner, “An approach for the numerical calculation of the non-isothermal pressure-throughput-characteristics of single screw melt-extruder,” 2023, doi: 10.1063/5.0138944.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49737
H. Malatyali, V. Schöppner, and T. Hoemann, “Investigation of the influence of process and screw configurations on fiber length for recycled carbon fiber,” 2023, doi: 10.1063/5.0139631.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 49734
H. Malatyali and V. Schöppner, “Investigation of shear rates in twin-screw extruder using CFD-simulation,” 2023, doi: 10.1063/5.0139630.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52800
D. Stüker and V. Schöppner, “Simplified numerical calculation of the isothermal, three-dimensional, Non-Newtonian flow characteristics of single-screw melt-extruder,” presented at the PROCEEDINGS OF THE 36TH CONFERENCE OF THE POLYMER PROCESSING SOCIETY, PPS36, 2023, doi: 10.1063/5.0138943.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 31733
V. Schöppner and F. Brüning, “Calibration of a Contact Model for DEM Simulations of Grooved Feed Sections of Single Screw Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS-36), Montreal (Kanada), 2023, doi: 10.1063/5.0135858.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34748
S. Vogtschmidt and V. Schöppner, “The short-and long-term properties of welded high-temperature-resistant thermoplastics,” presented at the 75th IIW Annual Assembly and International Conference of the international Institute of Welding (IIW), Tokyo, 2023, doi: 10.1007/s40194-023-01595-3.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52801
M. Altepeter, S. Wanke, and V. Schöppner, “Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” 2023, doi: 10.1063/5.0135824.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48750
V. Schöppner, M. Altepeter, L. Austermeier, S. Wanke, and P. Meinheit, “Polypropylene Degradation on Co-Rotating Twin-Screw Extruders,” Polymers 2023, no. 15(9), p. 2181, 2023, doi: 10.3390/polym15092181.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 34736
V. Schöppner and M. Frank, “Investigation of the Homogenization Performance of Various Faceted Mixers and Optimization with Regard to Mixing as well as Pressure Throughput Behavior,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2023, doi: 10.1063/5.0135825.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 29946
C. W. T. Schall and V. Schöppner, “Design of a test bench for measuring the degradation behavior of plastics during processing,” presented at the PPS36, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48742
V. Schöppner and C. W. T. Schall, “Material Characterization of Polypropylene and Polystyrene Regarding Molecular Degradation Behavior,” Materials, no. 16(17), p. 5891, 2023, doi: 10.3390/ma16175891.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48659
D. Trienens, V. Schöppner, and R. Bunse, “Determination of Correlations between Melt Quality and the Screw Performance Index in the Extrusion Process,” Polymers 2023, 2023, doi: https://doi.org/10.3390/polym15163427.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48737
V. Schöppner and D. Kleinschmidt, “Improvement of a method for the correction of wall slip effects within the rheological measurements of filled rubber compounds,” SPE Polymers, pp. 1–17, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 52833
V. Schöppner, L. Austermeier, F. Brüning, J. P. Oldemeier, and O. Brandt, “Recycling-Ansatz für mehrkomponentige Kunststoffprodukte durch thermische Verbundtrennung,” EXTRUSION, no. 8/2023, pp. 56–59, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 52840
V. Schöppner and T. Arndt, “Anvil-free ultrasonic welding for welding situations with one sided access,” 2023.
LibreCat
2022 | Journal Article | LibreCat-ID: 29947
C. W. T. Schall and V. Schöppner, “Measurement of material degradation in dependence of shear rate, temperature, and residence time,” Polymer Engineering and Science, vol. 62, no. 3, pp. 815–823, 2022, doi: 10.1002/pen.25887.
LibreCat
| DOI
2022 | Newspaper Article | LibreCat-ID: 34723
V. Schöppner, K. Gevers, L. Schraa, and P. Töws, “Auswirkungen unterschiedlicher Erwärmstrategien auf die quasistatische und zyklische Belastbarkeit von infrarotgeschweißten, glasfaserverstärkten Thermoplastbauteilen,” Joining Plastics, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34717
V. Schöppner, F. Brüning, and L. Sommer, “A Reverse Engineering Approach for Calibrating Frictional Behavior of Contact Models for Numerical Simulation of Solids Conveying in Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PSS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34722
V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Auswirkungen des Vorscherungseinflusses im Extrusionsprozess auf die rheologischen Kennwerte gefüllter Kautschukmischungen,” GAK, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34721
V. Schöppner, M. Dörner, M. Frank, and C. W. T. Schall, “Auf der Welle zum Mischerfolg,” Kunststoffe, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34730
V. Schöppner and D. Kleinschmidt, “Estimation and correction of non-isothermal effects of carbon black-filled rubber compounds in viscosity measurements,” presented at the 14th Rubber Fall Colloquium (KHK), Hannover, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34738
V. Schöppner et al., “Investigations on the Influence of Viscoelasticity on the Swell Behaviour and Flow Instabilities of Carbon Black-Filled Rubber Compounds,” presented at the 31. Internationales Kolloquium Kunststofftechnik, Aachen, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34735
V. Schöppner and F. Brüning, “Investigating Different Methods for Numerical Simulation of Temperature Development in a Feed Section of a Single-Screw Extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34734
V. Schöppner and J. Köllermeier, “Integration of IR Based Inline Measurement Systems of the Surface Temperature of Square Hollow Profiles in an Extrusion Process,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34737
V. Schöppner and M. Frank, “Investigation of the Pressure-Throughput Behavior of Different Spiral Shearing Sections on an Analytical and Simulative Basis,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34740
V. Schöppner, M. Altepeter, and S. Wanke, “Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 34752
V. Schöppner, D. Kleinschmidt, U. Nillius, and C. Hopmann, “Weiterentwicklung eines Verfahrens zur Korrektur von Wandgleiteffekten im Rahmen rheologischer Messungen an gefüllten Kautschukmischungen,” GAK, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33090
K. Gevers, A. Tornede, M. D. Wever, V. Schöppner, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,” Welding in the World, 2022, doi: 10.1007/s40194-022-01339-9.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 34727
V. Schöppner, J. Köllermeier, G. Hiesgen, and J. Trippe, “Development of Simulation Based Assistant Systems for Automatic Process Monitoring and Derivation of Recommendations to Optimize a Profile Extrusion Line,” presented at the 2nd International Symposium on Plastics Technology, Aachen, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34720
V. Schöppner and J. Köllermeier, “Application of a Dynamic Approach to Determine the Optimal Barrel Temperature of Single Screw Extruders,” presented at the 37th International Conference of the Polymer Processing Society (PPS), Fukuoka, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34726
V. Schöppner and J. Köllermeier, “Development of an Inline-Measurement System of the Surface Temperature of Square Hollow Profiles,” presented at the Annual Conference of the Society of Plastics Engineers (ANTEC 2022), Charlotte, 2022.
LibreCat
2022 | Book | LibreCat-ID: 48356
V. Schöppner and S. Vogtschmidt, Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Koblenz, 2022, pp. 534–540.
LibreCat
2022 | Book | LibreCat-ID: 48358
V. Schöppner, M. Dörner, M. Frank, and C. Schall, On the Wave to Successful Mixing. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34733
A. Rüppel, S. Wolff, J. P. Oldemeier, V. Schöppner, and H.-P. Heim, “Influence of Processing Glass-Fiber Filled Plastics on Different Twin-Screw Extruders and Varying Screw Designs on Fiber Length and Particle Distribution,” Polymers, vol. 14, no. 15, Art. no. 3113, 2022, doi: 10.3390/polym14153113.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29948
F. Brüning and V. Schöppner, “Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders,” Polymers 14, 2022, doi: https://doi.org/10.3390/polym14020256.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34708
V. Schöppner, K. Gevers, A. Tornede, M. Wever, and E. Hüllermeier, “A comparison of heuristic, statistical, and machine learning methods for heated tool butt welding of two different materials,” Welding in the World, p. 14, 2022.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 24372
K. Gevers and V. Schöppner, “Lebensdauer vorhersagen?,” K-Zeitung, no. 1–2.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24382
K. Gevers, V. Schöppner, and E. Hüllermeier, “Heated tool butt welding of two different materials – Established methods versus artificial intelligence,” presented at the International Institute of Welding, online, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24389
T. Arndt and V. Schöppner, “Development of scale up rules for quasi-simultaneous laser transmission welding of thermoplastics,” presented at the International institute of welding, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24441
M. Frank and V. Schöppner, “DEVELOPMENT OF A NEW METHOD TO EVALUATE THE DISTRIBUTIVE MIXING QUALITY BASED ON THE PARTICLE TRACKING METHOD AND THE DELAUNAY TRIANGULATION,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 26630
M. Altepeter, V. Schöppner, and S. Wanke, “Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder,” 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23839
C. Marschik, W. Roland, M. Döner, G. Steinbichler, and V. Schöppner, “A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion,” Polymers, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 23867
M. Bialaschik, V. Schöppner, M. Albrecht, and M. Gehde, “Influence of material degradation on weld seam quality in hot gas butt welding of polyamides,” Welding in the World, pp. 1161–1169, 2021, doi: 10.1007/s40194-021-01108-0.
LibreCat
| DOI
2021 | Newspaper Article | LibreCat-ID: 31758
V. Schöppner and J. H. Martens, “Eine runde Sache,” Kunststoffe, pp. 91–93, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31776
V. Schöppner and K. Gevers, “ Lebensdauer vorhersagen?,” K-Zeitung, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31777
V. Schöppner, M. Altepeter, and S. Wanke, “Material Degradation of Polypropylene on the Co-Rotating Twin Screw Extruder,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Melbourne (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31782
V. Schöppner and D. Kleinschmidt, “Viskoelastische Materialmodellierung in Strömungssimulationen,” presented at the 27. Techomer - Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Online) , 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31785
V. Schöppner, M. Albrecht, M. Gehde, and M. O. Bialaschik, “Warmgasstumpfschweißen - Einfluss des Werkzeugdesigns und des verwendeten Prozessgases auf das Erwärm- und Schweißverhalten,” presented at the Technomer, Chemnitz (Deutschland), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31784
V. Schöppner, M. Dörner, and C. W. T. Schall, “Vorteilhaftes Prozessverhalten von Wave-Schnecken in der Einschneckenextrusion,” presented at the Technomer 2021, Chemnitz, 2021.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 31786
V. Schöppner, M. O. Bialaschik, M. Albrecht, and M. Gehde, “Warmgasstumpfschweißen von Kunststoffen,” Joining Plastics, pp. 162–169, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31719
V. Schöppner and S. Vogtschmidt, “ Analyse des Erwärm- und Umstellverhaltens beim Schweißen von hochtemperaturbeständigen Kunststoffen,” presented at the DVS CONGRESS, digital, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31730
V. Schöppner and S. Vogtschmidt, “ Anwendungsorientiertes Schweißen von hochtemperaturbeständigen Kunststoffen,” presented at the Technomer, Deutschland (digital), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 31750
J. Köllermeier and V. Schöppner, “Development of a Dynamic Strategy to Determine the Optimal Barrel Temperature of Single Screw Extruders,” presented at the 36th International Conference of the Polymer Processing Society (PPS), Montreal (Kanada), 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 24442
M. Frank, V. Hollenhorst, and V. Schöppner, “Investigation of the pressure-throughput behavior of different faceted mixer geometries on an analytical and simulative basis ,” 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 23835
M. Dörner and V. Schöppner, “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts,” presented at the ANTEC 21, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 24383
A. Wübbeke et al., “Effect of nucleating additives on short- and long-term tensile strength and residual stresses of welded polypropylene samples ,” Polymers, 2021.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24133
V. Schöppner, L. Austermeier, and K. Dietl, “Der richtige Dreh für Simulationen,” Blasformen & Extrusionswerkzeuge, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24134
V. Schöppner, L. Austermeier, and K. Dietl, “SKZ simuliert Doppelschnecke,” K Zeitung, 2020.
LibreCat
2020 | Misc | LibreCat-ID: 24204
V. Schöppner, M. Dörner, and C. Marschik, ANALYSIS OF THE ADVANTAGEOUS PROCESS AND MIXING BEHAVIOUR OF WAVE-DISPERSION SCREWS IN SINGLE SCREW EXTRUSION. 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24207
V. Schöppner, M. Dörner, C. Marschik, W. Roland, S. Schaufler, and G. Steinbichler, “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part B. (Superimposed Drag-Pressure Flows in Extrusion),” Polymers, no. 12(9), p. 1900, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24231
V. Schöppner, M. Dörner, C. Marschik, and G. Steinbichler, “Development of an Analytical Model to Describe the Disperse Melting in Wave-Dispersion Screws,” Polymers, p. 946, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24312
S. Vogtschmidt, I. Fiebig, and V. Schöppner, “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien,” Joining Plastics, no. 3–4, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24318
S. Vogtschmidt and V. Schöppner, “Wechseldehnungsschweißen - Entwicklung einer Fügetechnologie für 3D-Geometrien,” in DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 2020, vol. 365.
LibreCat
2020 | Journal Article | LibreCat-ID: 24321
S. Vogtschmidt and V. Schöppner, “Vibration welding of components with angled areas in the direction of vibration,” Welding in the World, vol. 64, pp. 1843–1853, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24324
S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics, no. 3–4, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24385
T. Arndt and V. Schöppner, “Kunststofftechnik Paderborn: Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen von Thermoplasten,” Joining Plastics, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24386
T. Arndt and V. Schöppner, “Wenn Regeln Potenziale freisetzen,” K-Zeitung, 2020.
LibreCat
2020 | Newspaper Article | LibreCat-ID: 24387
T. Arndt and V. Schöppner, “Quasi-Simultaneous Laser Transmission Welding,” PhotonicsViews, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24471
V. Schöppner and M. Bialaschik, “Influence of Material Degradation on Weld Seam Quality in Hot Gas Welding of Polyamides,” presented at the 73th Annual Assembly of the International Institute of Welding (IIW), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23861
M. Altepeter and V. Schöppner, “Materialabbau im Doppelschneckenextruder,” Kunststoffe, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23865
V. Schöppner and F. Brüning, “Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations,” in Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 23868
M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden,” DVS CONGRESS 2020 - Große Schweißtechnische Tagung, vol. 365, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 23873
M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Hot gas welding – Influences of the tool design,” presented at the PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society, Pretoria, 2020, doi: 10.1063/5.0029478.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 24245
V. Schöppner et al., “Investigation of residual stresses of hot plate welding,” presented at the 73rd Annual Assembly of the International Institute of Welding (IIW), Marina Bay (Singapore), 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 24236
V. Schöppner et al., “Selected Aspects for the Assessment of Laser Transmission Welding,” Joining Plastics, pp. 30–35, 2020.
LibreCat
2020 | Conference Paper | LibreCat-ID: 24472
V. Schöppner et al., “LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS,” presented at the ANTEC20, Texas (USA), 2020.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25617
V. Schöppner and F. Sporkmann, “Analysis of the Characteristic Flow Areas for Erdmenger-Elements to Predict the Throughput-Pressure Behavior of Co-Rotating Twin Screw Extruders by Using 3D FEM Simulation,” presented at the 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25622
V. Schöppner and M. Dörner, “COMPARISON OF THE CONVENTIONAL AND THE DISPERSE MELTING MODEL REGARDING DIFFERENT PROCESS PARAMETERS,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25623
V. Schöppner and V. Resonnek, “DETERMINATION OF THE BARREL TEMPERATURE SETTING OF SINGLE SCREW EXTRUDERS USING FUZZY LOGIC,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25627
V. Schöppner and K. Westhues, Entwicklung eines Modells zur Berechnung der initialen Aufschmelzvorgänge in gleichläufigen Doppelschneckenextrudern. Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25628
V. Schöppner and J. Walter, “Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 1,” GAK-Gummi Fasern Kunststoffe, p. S. 152-159, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25629
V. Schöppner and J. Walter, “Entwicklung von Scale-Up Regeln für kaltgefütterte Kautschukstiftextruder Teil 2,” GAK Gummi Faser Kunststoffe, pp. 206–213, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25633
V. Schöppner and V. Resonnek, “Extruder optimier dich!,” Kunstsstoffe, pp. 56–61, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25634
V. Schöppner, “Grundlagen der Haftung in der Grenzfläche beim Kunststoffschweißprozess,” presented at the VDI Wissensforum - Schweißen von Kunststoffen, Paderborn (Deutschland), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 24326
S. Vogtschmidt and V. Schöppner, “Vibration welding of components with angled areas in the direction of vibration,” presented at the 72nd Assembly of the International Institute of Welding (IIW), Bratislava, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25736
V. Schöppner, H. Bayazian, and A. Yadegari, “Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25737
V. Schöppner, F. Sporkmann, and A. Heide, “New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method,” presented at the 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25746
V. Schöppner, H. Bayazian, A. Yadegari, and H. Haddad, “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” presented at the 35th PPS, Cesme-Izmir (Türkei), 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25750
V. Schöppner and F. Sporkmann, “Scale up von Doppelschneckenmaschinen,” presented at the VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
2019 | Book | LibreCat-ID: 25751
V. Schöppner, P. Meilwes, and K. Westhues, Schmelzefilter. Chemnitz (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25753
V. Schöppner and F. Sporkmann, “Simulation aids compounding success,” Compounding World, pp. 47–56, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 25754
V. Schöppner and F. Brüning, “Simulation der Feststoffförderung im Einschneckenextruder,” WAK Jahresmagazin, pp. 64–67, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25759
V. Schöppner and K. Westhues, “Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern,” presented at the VDI Wissensforum, Stuttgart (Deutschland), 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 23866
V. Schöppner and F. Brüning, “Simulation der Feststoffförderung im Einzug von Einschneckenextrudern,” WAK Jahresmagazin, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 23879
M. Albrecht, M. Gehde, M. Bialaschik, and V. Schöppner, “Einfluss des Werkzeugdesignes auf das Erwärmverhalten beim Warmgasschweißen,” presented at the Technomer 2019 - 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 22027
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” 2019, doi: 10.1063/1.5088315.
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 25619
V. Schöppner, M. Dörner, C. Marschik, W. Roland, J. Miethlinger, and G. Steinbichler, “Application of Network Analysis to Flow Systems with Alternating Wave Channels: Part A (Pressure Flows).,” Polymers, pp. 1488–1515, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 44308
H. Bayazian, V. Schöppner, A. Yadegari , and H. Haddad , “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” presented at the 35th PPS , Türkei , 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 25641
V. Schöppner et al., “Langzeitfestigkeit von Schweißungen aus PP unter Berücksichtigung der Morphologie,” presented at the Werkstoffwoche (2019), Dresden (Deutschland), 2019.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26929
V. Schöppner, C. Schumacher, and C. Fels, “A Method to Evaluate the Process-Specific Warpage for Different Polymers in the FDM Process,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26934
V. Schöppner, F. Sporkmann, and J. Markarian, “Building the Perfect Model,” Compounding World, no. Onlineausgabe März, pp. 31–40, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26935
V. Schöppner and P. Meilwes, “CAD-Datenerzeugung zur Druckverlustsimulation von Filtermedien,” Konstruktion, vol. 70. Jg. Heft 11, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26940
V. Schöppner and K. Westhues, “Differenzierte Betrachtung der Energieeinträge in Feststoffförder- und Aufschmelzzone gleichläufiger Doppelschneckenextruder,” presented at the VDI Wissensforum, Leverkusen (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26944
V. Schöppner, H. Bayazian, A. Yadgari, J. Morshedian, A. Jamshidi, and M. Razavi-Nouri, “Evaluation of Morphology and Crystallinity of Biaxially Oriented PP Films,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26945
V. Schöppner and I. Fiebig, “Evaluation of the Elongation Ability of Polymer Melts for the Extension of the Design Freedom in Vibration Welding,” presented at the 71st Annual Assembly of the International Institute of Welding (IIW), Bali (Indonesien), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26947
V. Schöppner and J. Fiebig, “Factors Influencing the Fiber Orientation in Welding of Fiber-Reinforced Thermoplastics,” Welding in the World, vol. 62. Jg., no. Heft 5, pp. 997–1012, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26950
V. Schöppner and I. Fiebig, “Influence of Fiber Orientation and Weld Position in Welding Injection-Molded Fiber-Reinforced Thermoplastics,” Welding in the World, vol. 62, no. 6, pp. 1301–1309, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26952
V. Schöppner and H. Bayazian, “Investigation of Molecular Weight Distributions during Extrusion Process of Polypropylene by Rheometry Experiment,” presented at the 34th International Conference of the Polymer Processing Societey (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26955
V. Schöppner, C. Schumacher, and C. Fels, “Materialentwicklung für FLM,” presented at the WAK-Symposium, Bayreuth (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26956
V. Schöppner, C. Schumacher, and C. Fels, “Materialschwindung und Verzug im FDM-Prozess,” presented at the DVM Tagung - Additiv gefertigte Bauteile und Strukturen, Berlin (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26957
V. Schöppner and J. Trippe, “Modeling of Solid Conveying Pressure Throughput Behavior of Single Screw Smooth Barrel Extruders under Consideration of Backpressure and High Screw Speeds,” International Polymer Processing, vol. 33, no. 4, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26958
V. Schöppner and J. Trippe, “Modeling of the Dissipation in the Solid Conveying Section in Single Screw Extruders,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26959
V. Schöppner and P. Meilwes, “Modelling the Contamination Behavior of Polymer Melt Filters and Pressure Loss Simulations of Filtration Media,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26960
V. Schöppner, H. Bayazian, M. Hopp, and A. Yadegari, “Molecular Weight Distribution Prediction of Rheology against Gel Permeation Chromatography for Film Grade Polypropylene,” presented at the 76th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26962
V. Schöppner and F. Sporkmann, “New Method to Analyze the Throughput-Pressure Behavior with the Corrected Twin Screw Channel Geometry and the Induced Drag Flow of Screw Elements by Using 3D FEM Simulation,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26964
V. Schöppner, C. Schumacher, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” presented at the 29th Annual International Solid Freeform Fabrication Symposium (SFF) - An Additive Manufacturing Conference, Austin (USA), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26965
V. Schöppner and J. Walter, “Scale-Up of Garvey-Die Test Setup,” presented at the 13. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26966
V. Schöppner and J. Walter, “Scale-Up Regeln für Kautschukstiftextruder, Ansätze auf Basis einer konstanten Mischgüte,” presented at the Deutsche Kautschuk-Tagung (DKT 2018), Nürnberg (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26967
V. Schöppner and I. Fiebig, “Schweißnahtfestigkeit von Sandwichbauteilen mit einer glasfaserverstärkten Kernkomponente,” Joining Plastics, vol. 12, no. 2, pp. 87–93, 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 26968
V. Schöppner and V. Resonnek, “Self-Optimizing Barrel Temperature Setting Control of Single Screw Extruders for Improving the Melt Quality,” presented at the 34th International Conference of the Polymer Processing Society (PPS), Taipei (Taiwan), 2018.
LibreCat
2018 | Conference Paper | LibreCat-ID: 22020
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 22034
F. Knoop, M. Köhler, T. Lieneke, D. Zimmer, and V. Schöppner, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, vol. 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 22035
F. Knoop, T. Lieneke, V. Schöppner, and D. Zimmer, “Additive Fertigung nach Maß,” Kunststoffe, vol. 6, pp. 70–73, 2018, doi: https://res.cloudinary.com/sternwald-systems/raw/upload/v1/hugoprd/ARTIKEL_ATTACH/00241B42_8D96DD914ED4/5029dcf18479b2d2f28f3c2032d6a0a5ac46d8ad/KU_2018_06_Additive-Fertigung-nach-Mass.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22043
C. Schumacher, V. Schöppner, and S. Gnaase, “Processing Short Fiber Reinforced Polymers in the Fused Deposition Modeling Process,” in 29th Annual International Solid Freeform Fabrication Symposium, 2018, vol. 29, pp. 1112–1120, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/090%20ProcessingShortFiberReinforcedPolymersinthe.pdf.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 22046
F. Knoop and V. Schöppner, “Influence of the Layer Time on the Resulting Part Properties in the Fused Deposition Modeling Process,” in SPE ANTEC 2018, 2018, vol. 1, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A1700027301.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 26954
V. Schöppner, M. Schadomsky, and D. Stüker, “Investigations of High-Speed Rubber Extrusion with Consideration of Melt Homogeneity,” presented at the Deutsche Kautschuk-Tagung (DKT 2018), Nürnberg (Deutschland), 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26943
V. Schöppner, F. Knoop, M. Köhler, T. Lieneke, and D. Zimmer, “Erarbeitung von Konstruktionsregeln für Hybridbauteile: Integration von metallischen Einlegern in FDM-Strukturen,” Konstruktion, vol. 70. Jg. Heft 10, pp. 83–88, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26930
V. Schöppner, D. Zimmer, F. Knoop, and T. Lieneke, “Additive Fertigung nach Maß,” Kunststoffe, vol. 108. Jg. Heft 6, 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26932
V. Schöppner, P. Lakemeyer, B. Geißler, T. Laumer, A. Wübbeke, and T. Frick, “Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths,” Journal of Laser Applications, vol. 30. Jg., 2018.
LibreCat
2018 | Journal Article | LibreCat-ID: 26933
V. Schöppner, A. Wübbeke, B. Geißler, T. Laumer, T. Frick, and M. Schmidt, “Analysis of the weld seam morphology of polypropylene in laser transmission welding,” Manuf. Sci. Eng, p. 140(11), 2018.
LibreCat
2017 | Journal Article | LibreCat-ID: 27202
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, p. S. 108-114, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27205
V. Schöppner, H. Bayazian, F. Reinders, and C. Goebel, “Degradation of Bimodal Distribution Polypropylene and Polyethylene during the Extrusion Process,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27207
V. Schöppner and K. Westhues, “Differenzierte Betrachtung der Energieeinträge in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder,” presented at the 43. Deutsche Compoundiertagung, Nürnberg (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27208
V. Schöppner and J. Walter, “Distinction of Measurement-Related and Material-Related Scattering of the Young’s Modulus in Thermoplastics while Measuring by Quasi-Static Tensile Testing,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27210
V. Schöppner, K. Westhues, R. Weinlein, and A. Knieper, “Energieeintrag in Feststoffförder- und Aufschmelzzonen gleichläufiger Doppelschneckenextruder,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27213
V. Schöppner, F. Reinders, M. Müller-Roosen, S. Dill, and A. Kaya, “Entwicklung einer unweltverträglichen und unbedenklichen flammgeschützten Polyethylen-Blasfolie,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27214
V. Schöppner and J. Trippe, “Feststoff effizienter fördern,” Kunststoffe, pp. 47–52, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27216
V. Schöppner and P. Meilwes, “Filterverschmutzung berechenbar machen,” Kunststoffe, no. 107. Jg. Heft 8, pp. 58–61, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27217
V. Schöppner and M. Pohl, “High Speed Extrusion of Modified Polycarbonate,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27221
V. Schöppner and V. Resonnek, “Investigation of the Barrel Temperature Profile on the Process Behavior of Single Screw Extruders and Strategies to Determine the Optimal Temperature Control,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27222
V. Schöppner and K. Westhues, “Investigation of the Temperature Development within the Solid Conveying Zone of Twin-Screw Extruder Based on the Discrete Element Method (DEM),” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27226
V. Schöppner and P. Lakemeyer, “Laser Transmission Welding of Automotive Head Lamps without Clamping Tool,” Welding in the World, no. Onlineausgabe, pp. 589–602, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27227
V. Schöppner, P. Lakemeyer, P. Bates, B. Zazoum, G. Zak, and D. DuQuesnay, “Matching of Laser Intensity Distribution for Laser Transmission Welding of Thermoplastics,” Welding in the World, no. Onlineausgabe, pp. 1247–1252, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27228
V. Schöppner et al., “Mehrschichtaufbau zur Verbesserung der mechanischen Eigenschaften von ökologisch unbedenklichen Flammschutzfolien,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27231
V. Schöppner and J. Trippe, “Modeling of the Solid Throughput and Pressure Build-Up of Single Screw Smooth Barrel Extruders under Consideration of the Backpressure and High Screw Speeds,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27232
V. Schöppner and F. Reinders, “Modellierung des Reckprozesses von mono- und biaxial verstreckten Polypropylenfolien,” presented at the Werkstoffwoche 2017, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27233
V. Schöppner and P. Meilwes, “Modelling the Contamination Behaviour of Polymer Melt Filters,” presented at the 33rd International Conference of the Polymer Processing Society (PPS), Cancún (Mexiko), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27234
V. Schöppner and F. Reinders, “Modelling the Monoaxial Stretching of Polypropylene Films by a Nonlinear Spring Dashpot,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27235
V. Schöppner and F. Reinders, “Modelling the Stretching of Polypropylene Films by a Nonlinear Spring Dashpot Model,” presented at the Europe-Africa Conference of the Polymer Processing Society, Dresden (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27236
V. Schöppner, I. Fiebig, and P. Lakemeyer, “Opportunities in Welding of Fiber-Reinforced Thermoplastics for Different Weld Positions in Injection-Molded Parts,” presented at the 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 27237
V. Schöppner and H. Westhues, “Phänomenorientierte Untersuchung der Feststoffförderzonen gleichläufiger Doppelschneckenextruder mithilfe der DEM-Simulation,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, no. 13. Jg. Heft 3, pp. 196–211, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27238
V. Schöppner and I. Fiebig, “Potentiale zur Erhöhung der Schweißnahtfestigkeit faserverstärkter Thermoplaste,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27240
V. Schöppner and K. Westhues, “Simulation von Doppelschneckenextrudern - Einblicke in das Gemeinschaftsforschungsprojekt SIGMA,” presented at the 12. Würzburger Compoundiertage, Würzburg (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27241
V. Schöppner and P. Lakemeyer, “Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics,” presented at the 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27242
V. Schöppner, P. Lakemeyer, and F. Reinders, “Simulation-Based Investigations of the Temperature Influence during Laser Transmission Welding of Thermoplastics,” presented at the 75th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Anaheim (USA), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 22040
F. Knoop, T. Lieneke, and V. Schöppner, “Reproduzierbarkeit der Maßhaltigkeit im Fused Deposition Modeling,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2017, pp. 52–66, doi: 10.3139/9783446454606.004.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22042
C. Schumacher, V. Schöppner, and J. Guntermann, “Considering machine- and process-specific influences to create custom-built specimens for the Fused Deposition Modeling process,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 470–484, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/ConsideringMachineandProcessSpecificInfluenc.pdf.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22045
F. Knoop and V. Schöppner, “Geometrical Accuracy of Holes and Cylinders Manufactured with Fused Deposition Modeling,” in 28th Annual International Solid Freeform Fabrication Symposium, 2017, vol. 28, pp. 2757–2776, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2017/Manuscripts/GeometricalAccuracyofHolesandCylindersManufa.pdf.
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 22049
V. Schöppner, C. Schumacher, and J. Guntermann, “Beurteilung der Schweißnahtfestigkeiten verschiedener Kunststoffe im FDM-Prozess,” Jahresmagazin Kunststofftechnik, vol. 1, no. 1, pp. 108–114, 2017.
LibreCat
2017 | Journal Article | LibreCat-ID: 22033
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” JOM: The Journal of The Minerals. Metals & Materials Society (TMS), pp. 563–568, 2017, doi: 10.1007/s11837-016-2197-2.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 22023
F. Knoop, A. Kloke, and V. Schöppner, “Quality Improvement of FDM Parts by Parameter Optimization ,” in 32nd International Conference of the Polymer Processing Society, 2017, vol. 32, doi: 10.1063/1.5016790.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 27201
V. Schöppner, M. Schadomsky, and J. Walter, “Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden,” presented at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 27220
V. Schöppner, P. Lakemeyer, A. Wübbeke, S. Geißler, and M. Schmidt, “Investigation of Residual Stress in Laser Transmission Welding of Polypropylene,” presented at the 70th Annual Assembly of the International Institute of Welding (IIW), Shanghai (China), 2017.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27245
V. Schöppner, K. Westhues, and T. Westhues, “A New Sample Preparation Method to Investigate Melting Phenomena within a Partly Filled Melting Zone Of Co-Rotating Twin Screw Extruders,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27248
V. Schöppner, S. Brockhaus, C. Penner, and J. Möckel, “Auswirkungen von Betriebsparametern in der Heißluftvulkanisation,” GAK Gummi Fasern Kunststoffe, no. 69. Jg. Heft 7, pp. 410–413, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27249
V. Schöppner, S. Littek, A. Döring, and D. Kuckling, “Berechnung des Materialabbaus von PP und PS in der Plastifiziereinheit Teil 1: Belastung und Materialmodellierung,” Zeitschrift Kunststofftechnik / Journal of Plastics Technology, p. 18, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27258
V. Schöppner and M. Pohl, “First Insight into the High Speed Extrusion of Polycarbonate,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27261
V. Schöppner and I. Fiebig, “Influence of the Initial Fiber Orientation on the Weld Strength in Welding of Glass Fiber Reinforced Thermoplastics,” International Journal of Polymer Science, no. Onlineausgabe, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27262
V. Schöppner and I. Fiebig, “Investigation on Factors Influencing Fiber Orientation in Welding of Fiber Reinforced Thermoplastics,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27263
V. Schöppner and J. Trippe, “Investigations of the Influence of Material and Pellet Shape on the Dissipation in the Solids Conveying Zone of Single-Screw Extruders Based on the Discrete Element Method,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27265
V. Schöppner, K. Westhues, and T. Westhues, “Melting Phenomena and Sample Preparation Method within a Partly Filled Melting Zone of Co-Rotating Twin Screw Extruders,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27266
V. Schöppner, P. Kloke, and K. Westhues, “Modellierung des Glasfaserlängenabbaus,” presented at the PolyMerTec 2016, Merseburg (Deutschland), 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27268
V. Schöppner, M. Hüttner, B. Henning, and M. Webersen, “Non-Destructive Characterization of Hygrothermally Aged Polymers,” presented at the 74th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Indianapolis (USA), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27270
V. Schöppner, T. Herken, F. Sporkmann, and F. Platte, “Partikel und Schmelze im dynamischen Netz,” Kunststoffe, pp. 70–75, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27271
E. Moritzer, V. Schöppner, P. Lakemeyer, and T. Nordmeyer, “Plasmaunterstütztes Fügen von Kunststoffen,” Joining Plastics, no. 10. Jg. Heft 2, pp. 100–108, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27272
V. Schöppner, A. Bagsik, and F. Knoop, “Quality Improvement of FDM Parts by Parameter Optimization,” presented at the 32nd International Conference of the Polymer Processing Society (PPS), Lyon (Frankreich), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27273
V. Schöppner and P. Meilwes, “Realitätsnah und definiert verschmutzen,” Kunststoffe, no. 106. Jg. Heft 8, pp. 80–84, 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27274
V. Schöppner and I. Fiebig, “Schweißen von faserverstärkten Kunststoffen: Erhöhung der Wirksamkeit der Faserverstärkung in der Schweißnaht,” Jahresmagazin Kunststofftechnik, pp. 120–126, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 27275
V. Schöppner et al., “Several Influences during Examinations of Laser Transmission Welding - Current Status,” presented at the 69th Annual Assembly of the International Institute of Welding (IIW), Melbourne (Australien), 2016.
LibreCat
2016 | Journal Article | LibreCat-ID: 27277
V. Schöppner, F. Evers, and P. Lakemeyer, “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials,” Welding in the World, no. Onlineausgabe, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 22019
M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured with Ultem 9085,” in 27th Annual International Solid Freeform Fabrication Symposium , 2016, vol. 27, pp. 563–568, doi: 10.1007/s11837-016-2197-2.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 22039
M. Fischer, O. Seewald, and V. Schöppner, “Chemical Surface Treatment of Ultem 9085 Parts,” in Rapid Tech - International Trade Show & Conference for Additive Manufacturing, 2016, pp. 121–133, doi: 10.3139/9783446450608.010.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 27247
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Analyse des Mischverhaltens von Stiftextrudern mit simulativen und experimentellen Methoden,” KGK Kautschuk Gummi Kunststoffe, no. 69. Jg. Heft 4, pp. 30–36, 2016.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27296
V. Schöppner, N. Fecke, and T. Herken, “Aus Alt mach Neu: Verarbeitung von PET Recyclingmaterial auf gleichläufigen Doppelschneckenextrudern,” Jahresmagazin Kunststofftechnik, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27300
V. Schöppner, F. Reinders, W. Bremser, and E. Sabanov, “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27301
V. Schöppner and J. Leßmann, “Discrete Element Simulations and Validation Tests Investigating Solids-Conveying Processes with Pressure Buildup in Single Screw Extruders,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27303
V. Schöppner and S. Brockhaus, “Einfluss von Zylinder- und Schneckentemperierung in der Kautschukextrusion,” GAK Gummi Fasern Kunststoffe, vol. 68, no. 7, pp. 470–474, 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27305
V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Influence of the Flow Channel Coating of the High Pressure Capillary Viscometer on the Formation of Wall Slip Effects in the Case of Rubber Compounds,” KGK Kautschuk Gummi Kunststoffe, vol. 68, no. 7–8, pp. 46–58, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27306
V. Schöppner, T. Herken, and M. Hüttner, “Influence of the Screw Clearances on the Pressure Build-Up,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27308
V. Schöppner, M. Schadomsky, and C. Hopmann, “Investigations of the Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27310
V. Schöppner and P. Lakemeyer, “Laser Transmission Welding of Automotive Headlamps without Clamping Tool,” presented at the GNS8 - International Conference on Thermoplastics Joining, Genua (Italien), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27311
V. Schöppner and P. Lakemeyer, “Laser Transmission Welding of Automotive Headlamps without Clamping Tool,” presented at the 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27314
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the Deutsche Kautschuk-Tagung (DKT 2015), Nürnberg (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27315
V. Schöppner, M. Schadomsky, C. Hopmann, and F. Lemke, “Mixing Behaviour of Pin-Type Rubber Extruders,” presented at the Science meets Tires, Aachen (Deutschland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27318
V. Schöppner and J. Leßmann, “Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk,” presented at the 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27319
V. Schöppner and J. Leßmann, “Parameterization and Validation of Discrete Element Simulations Regarding the Pressure Propagation in Plastic Pellets Bulk,” presented at the 15th Annual International Polymer Colloquium (IPC), Madison (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27320
V. Schöppner, T. Herken, M. Pohl, and K. Westhues, “Process Optimization – A New Model for Calculation of the Axial Temperature Curve for Twin-Screw Extruders,” presented at the 73rd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Orlando (USA), 2015.
LibreCat
2015 | Newspaper Article | LibreCat-ID: 27321
V. Schöppner, T. Herken, and M. Hüttner, “Druckaufbau auf gleichläufigen Doppelschneckenextrudern - Theoretische Grundlagen, Herausforderungen und Energiebilanz,” Prozessoptimierung an Compoundieranlagen, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27322
V. Schöppner, B. Henke, and F. Reinders, “Study to Validate the Characterization of Cross Flow Behavior in a Flat Film Die with Rectangular Cross Section,” presented at the 31st International Conference of the Polymer Processing Society (PPS), Jeju (Südkorea), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27325
V. Schöppner and P. Lakemeyer, “Transferbility of Investigation Results for Laser Transmission Welding,” presented at the 68th Annual Assembly of the International Institute of Welding (IIW), Helsinki (Finnland), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 27329
V. Schöppner, N. Fecke, and T. Herken, “Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 22031
F. Knoop and V. Schöppner, “Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30,” in ASPE Spring Topical Meeting, 2015, pp. 26–31, doi: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 22044
F. Knoop and V. Schöppner, “Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 935–948, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 27331
V. Schöppner, N. Fecke, and T. Herken, “Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder for Varying Vacuum Pressures,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27332
V. Schöppner and S. Littek, “Berechnung des Materialabbaus von Thermoplasten während des Plastifiziervorgangs,” presented at the PolyMerTec 2014, Merseburg (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27334
V. Schöppner and F. Reinders, “Development of Wood-Plastic Composites Based on Wood Particles and Dried Blood,” presented at the Biobased materials 2014 - 10th Congress for Biobased Materials, Fellbach (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27337
V. Schöppner, T. Herken, F. Reinders, and K. Westhues, “Simulation des Compoundiervorgangs im Doppelschneckenextruder, Modellierung - Simulation - Auslegung,” presented at the Erfolgreich Compoundieren mit Pulvern und Stäuben, Düsseldorf (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27338
V. Schöppner, N. Fecke, and T. Herken, “Experimental Analysis of the Material Degradation of PET on a Co-Rotating Twin-Screw Extruder,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Newspaper Article | LibreCat-ID: 27341
V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Grundlegende Studie und alternative Methode zur Bewertung des Wandgleiteffekts bei hochviskosen Kautschukmischungen,” KGK Kautschuk Gummi Kunststoffe, vol. 67, no. 11–12, 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27342
V. Schöppner and N. Böhm, “Herausforderungen bei der Verwendung von Wood-Plastic-Composites(WPC) im Automobilinnenbereich,” presented at the 16th Workshop Odour and Emissions of Plastic Materials, Kassel (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27344
V. Schöppner and B. Henke, “Illustration of Cross Flows of Polystyrene Melts Through a Coat-Hanger Die,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27346
V. Schöppner and F. Evers, “Influence of Flame Retardant Material on the Weld Strength of Plastic Parts,” presented at the 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Las Vegas (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27348
V. Schöppner, S. Brockhaus, B. Klie, and U. Giese, “Investigations about High-Speed Rubber Extrusion,” presented at the 11. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27349
V. Schöppner and S. Littek, “Measurement and Calculation of the Material Degradation of Polystyrene and Modeling of the Degradation by using REX,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27354
V. Schöppner, M. Schadomsky, and F. Lemke, “Optimisation of the Mixing Behaviour of Rubber Pin-Type Extruders,” presented at the 11. Kautschuk-Herbst-Kolloquium (KHK), Hannover (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27356
V. Schöppner and A. Wibbeke, “Production of Graded Structures in Films,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27357
V. Schöppner and A. Wibbeke, “Stretching of Polycarbonate,” presented at the 58th Ilmenau Scientific Colloquium, Ilmenau (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27360
V. Schöppner, F. Evers, and P. Lakemeyer, “The Influence of Welding Processes on the Weld Strength of Flame-Retardant Materials,” presented at the 67th Annual Assembly of the International Institute of Welding (IIW), Seoul (Südkorea), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27361
V. Schöppner and J. Leßmann, “Validation of Discrete Element Simulations in the Field of Solids Conveying in Single-screw Extruders,” presented at the 30th International Conference of the Polymer Processing Society (PPS), Cleveland (USA), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 27363
V. Schöppner, N. Böhm, and F. Reinders, “WPC: Compoundierung und Rezepturen,” presented at the WAK-Symposium, Karlsruhe (Deutschland), 2014.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22018
M. Fischer and V. Schöppner, “Finishing of ABS-M30 Parts Manufactured with Fused Deposition Modeling with Focus on Dimensional Accuracy,” in 25th Annual International Solid Freeform Fabrication Symposium, 2014, vol. 25, pp. 923–934, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-073-Fischer.pdf.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 22030
M. Fischer and V. Schöppner, “Effects of a mass finishing process on parts produced from Ultem 9085 by Fused Deposition Modeling,” in ANTEC, 2014, pp. 2331–2336.
LibreCat
2014 | Conference Paper | LibreCat-ID: 22021
A. Bagsik, S. Josupeit, V. Schöppner, and E. Klemp, “Mechanical Analysis of Lightweight Constructions manufactured with Fused Deposition Modeling,” in 29th International Conference of the Polymer Processing Society, 2014, vol. 29, pp. 696–701, doi: 10.1063/1.4873874.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 22017
M. Fischer and V. Schöppner, “Some Investigations Regarding the Surface Treatment of Ultem 9085 Parts Manufactured with Fused Deposition Modeling,” in 24th Annual International Solid Freeform Fabrication Symposium, 2013, vol. 24, pp. 805–815, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2013/2013-64-Fischer.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22016
A. Bagsik, V. Schöppner, and E. Klemp, “Long-Term ageing effects on Fused Deposition Modeling Parts manufactured with ULTEM*9085,” in 23rd Annual International Solid Freeform Fabrication Symposium, 2012, vol. 23, pp. 629–640, doi: http://utw10945.utweb.utexas.edu/Manuscripts/2012/2012-48-Bagsik.pdf.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 22164
A. Bagsik, V. Schöppner, and E. Klemp, “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in 1st International Conference on Thermo-Mechanically Graded Materials, 2012, vol. 1, pp. 129–134.
LibreCat
2012 | Conference Paper | LibreCat-ID: 22024
A. Bagsik, V. Schöppner, and E. Klemp, “Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085,” in 5th International Conference on Polymer and Mould Innovations, 2012, vol. 5, pp. 266–272, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 22029
A. Bagsik and V. Schöppner, “Mechanical Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in ANTEC, 2011, pp. 1294–1298, doi: https://www.researchgate.net/profile/Volker_Schoeppner/publication/284341800_Mechanical_properties_of_fused_deposition_modeling_parts_manufactured_with_ULTEMzast9085/links/5c73971b458515831f6cd501/Mechanical-properties-of-fused-deposition-modeling-parts-manufactured-with-ULTEM-zast9085.pdf.
LibreCat
| DOI
2010 | Conference Paper | LibreCat-ID: 23858
N. Kretzschmar and V. Schöppner, “Simulating Tightly Intermeshing, Co-Rotating Twin Screw Extruders with SIGMA,” in Proceedings of the 2010 Summer Computer Simulation Conference, 2010, pp. 133–140.
LibreCat
2010 | Conference Paper | LibreCat-ID: 22050
A. Bagsik, V. Schöppner, and E. Klemp, “FDM Part Quality Manufactured with ULTEM 9085,” 2010, doi: https://docplayer.net/255735-Fdm-part-quality-manufactured-with-ultem-9085.html.
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 25092
D. Bonefeld, V. Schöppner, H. Potente, R. Mahnken, and A. Shaban, “Residual stresses in the quasi-simultaneous laser transmission welding of amorphous thermoplastics,” Polymer Engineering & Science, pp. 1520–1526, 2010, doi: 10.1002/pen.21685.
LibreCat
| DOI