Mirko Schaper

schaper@lwk.uni-paderborn.de
ID
43720

158 Publications

Mark all

[158]
2025 | Journal Article | LibreCat-ID: 58133
Pramanik, Sudipta, Dennis Mileaege, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous Material.” Journal of Materials Engineering and Performance, 2025. https://doi.org/10.1007/s11665-024-10618-z.
LibreCat | DOI
 
[157]
2025 | Journal Article | LibreCat-ID: 58807
Neuser, Moritz, Pia Katharina Holtkamp, Kay-Peter Hoyer, Fabian Kappe, Safak Yildiz, Mathias Bobbert, Gerson Meschut, and Mirko Schaper. “Mechanical Properties and Joinability of the Near-Eutectic Aluminium Casting Alloy AlSi12.” The Journal of Materials: Design and Applications, Part L, 2025. https://doi.org/10.1177/14644207251319922.
LibreCat | DOI
 
[156]
2025 | Book Chapter | LibreCat-ID: 58950
Braun, Marcel Patrick Klaus, Olexandr Grydin, Kay-Peter Hoyer, and Mirko Schaper. “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System.” In The Minerals, Metals & Materials Series. Cham: Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-81061-9_12.
LibreCat | DOI
 
[155]
2025 | Conference Paper | LibreCat-ID: 59154
Neuser, Moritz, Kay-Peter Hoyer, and Mirko Schaper. “Processing of the Hypoeutectic AlSi9 Alloy with Twin-Roll Casting by Using Copper Shells.” In Materials Research Proceedings, Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-26.
LibreCat | DOI
 
[154]
2025 | Conference Paper | LibreCat-ID: 59155
Lauth, Martin, Kay-Peter Hoyer, Mirko Schaper, and Winfried Gräfen. “Cost-Effective Repair Solution for Twin-Roll-Caster Rollers.” In Materials Research Proceedings, Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-5.
LibreCat | DOI
 
[153]
2024 | Journal Article | LibreCat-ID: 52738
Milaege, Dennis, Niklas Eschemann, Kay-Peter Hoyer, and Mirko Schaper. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” Crystals 14, no. 2 (2024). https://doi.org/10.3390/cryst14020117.
LibreCat | DOI
 
[152]
2024 | Journal Article | LibreCat-ID: 57540
Mallow, Sina, Jette Broer, Benjamin Milkereit, Olexandr Grydin, Kay-Peter Hoyer, Kai-Uwe Garthe, Dennis Milaege, Viktoriya Boyko, Mirko Schaper, and Olaf Kessler. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” Production Engineering, 2024. https://doi.org/10.1007/s11740-024-01322-x.
LibreCat | DOI
 
[151]
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[150]
2023 | Journal Article | LibreCat-ID: 49107
Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Kay-Peter Hoyer, and Mirko Schaper. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals 13, no. 11 (2023). https://doi.org/10.3390/cryst13111592.
LibreCat | DOI
 
[149]
2023 | Conference Paper | LibreCat-ID: 43031
Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.
LibreCat | DOI
 
[148]
2023 | Journal Article | LibreCat-ID: 52405
Neuser, Moritz, Mirko Schaper, and Olexandr Grydin. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040132.
LibreCat | DOI
 
[147]
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.
LibreCat | DOI
 
[146]
2023 | Conference Paper | LibreCat-ID: 52406
Grydin, Olexandr, Moritz Neuser, and Mirko Schaper. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” In     Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_61.
LibreCat | DOI
 
[145]
2023 | Book Chapter | LibreCat-ID: 41959
Grydin, Olexandr, Kai-Uwe Garthe, Xueyang Yuan, Jette Broer, Olaf Keßler, Rostislav Králík, Miroslav Cieslar, and Mirko Schaper. “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips.” In Light Metals 2023, edited by Stephan Broek, 1031–37. The Minerals, Metals & Materials Series. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-22532-1_137.
LibreCat | DOI | Download (ext.)
 
[144]
2023 | Journal Article | LibreCat-ID: 41492
Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, Jan Tobias Krüger, Florian Hengsbach, Alexander Kircheis, Weiyu Zhao, Jörg Fischer-Bühner, and Mirko Schaper. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders 2, no. 1 (2023): 59–74. https://doi.org/10.3390/powders2010005.
LibreCat | DOI
 
[143]
2023 | Journal Article | LibreCat-ID: 43441
Šlapáková, Michaela, Barbora Kihoulou, Jozef Veselý, Peter Minárik, Klaudia Fekete, Michal Knapek, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “3D-Structure of Intermetallic Interface Layer in Al–Steel Clad Material.” Vacuum 212 (2023). https://doi.org/10.1016/j.vacuum.2023.112043.
LibreCat | DOI
 
[142]
2023 | Book Chapter | LibreCat-ID: 45360
Haase, Michael, Maximilian Bieber, Frederik Tasche, Mirko Schaper, Kay-Peter Hoyer, Bernd Ponik, and Balázs Magyar. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” In Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast, Michael Eichmann, and Gerd Witt. München: Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
 
[141]
2023 | Journal Article | LibreCat-ID: 44078
Andreiev, Anatolii, Kay-Peter Hoyer, Florian Hengsbach, Michael Haase, Lennart Tasche, Kristina Duschik, and Mirko Schaper. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” Journal of Materials Processing Technology 317 (2023). https://doi.org/10.1016/j.jmatprotec.2023.117991.
LibreCat | DOI
 
[140]
2023 | Journal Article | LibreCat-ID: 46503
Pramanik, Sudipta, Kay-Peter Hoyer, and Mirko Schaper. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping Journal 29, no. 6 (2023): 1257–69. https://doi.org/10.1108/rpj-06-2022-0190.
LibreCat | DOI
 
[139]
2023 | Journal Article | LibreCat-ID: 46507
Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Anatolii Andreiev, Mirko Schaper, and Kay-Peter Hoyer. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” Advanced Engineering Materials 25, no. 14 (2023). https://doi.org/10.1002/adem.202201850.
LibreCat | DOI
 
[138]
2023 | Book Chapter | LibreCat-ID: 46870
Menge, Dennis, Dennis Milaege, Kay-Peter Hoyer, Hans-Joachim Schmid, and Mirko Schaper. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” In Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer. Bielefeld, Germany: transcript Verlag, 2023. https://doi.org/10.14361/9783839463772-007.
LibreCat | DOI
 
[137]
2023 | Journal Article | LibreCat-ID: 47122
Pramanik, Sudipta, Jan Tobias Krüger, Mirko Schaper, and Kay-Peter Hoyer. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, 2023. https://doi.org/10.1007/s11661-023-07186-7.
LibreCat | DOI
 
[136]
2022 | Conference Paper | LibreCat-ID: 36335 | OA
CIESLAR, Miroslav, Barbora KŘIVSKÁ, Rostislav KRÁLÍK, Lucia BAJTOŠOVÁ, Olexandr Grydin, Mykhailo STOLBCHENKO, and Mirko Schaper. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.” In METAL 2022 Conference Proeedings. TANGER Ltd., 2022. https://doi.org/10.37904/metal.2022.4438.
LibreCat | DOI | Download (ext.)
 
[135]
2022 | Journal Article | LibreCat-ID: 36332 | OA
Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[134]
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221075838.
LibreCat | DOI
 
[133]
2022 | Journal Article | LibreCat-ID: 29505
Neuser, Moritz, Olexandr Grydin, Y. Frolov, and Mirko Schaper. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, 2022. https://doi.org/10.1007/s11740-022-01106-1.
LibreCat | DOI
 
[132]
2022 | Book Chapter | LibreCat-ID: 29771
Grydin, Olexandr, Dag Mortensen, Moritz Neuser, Dag Lindholm, Hallvard G. Fjaer, and Mirko Schaper. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.” In Light Metals 2022. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-030-92529-1_96.
LibreCat | DOI
 
[131]
2022 | Conference Paper | LibreCat-ID: 36339 | OA
BAJTOŠOVÁ, Lucia, Olexandr Grydin, Mykhailo STOLBCHENKO, Mirko Schaper, Barbora KŘIVSKÁ, Rostislav KRÁLÍK, Michaela ŠLAPÁKOVÁ, and Miroslav CIESLAR. “Phase Identification in Twin-Roll Cast Al-Li Alloys.” In METAL 2022 Conference Proeedings. TANGER Ltd., 2022. https://doi.org/10.37904/metal.2022.4437.
LibreCat | DOI | Download (ext.)
 
[130]
2022 | Journal Article | LibreCat-ID: 32188
Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials 15, no. 12 (2022). https://doi.org/10.3390/ma15124072.
LibreCat | DOI
 
[129]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, 2022, 1–16. https://doi.org/10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[128]
2022 | Journal Article | LibreCat-ID: 30519
Pramanik, Sudipta, Frederik Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism 2 (2022): 88–104. https://doi.org/10.3390/magnetism2020007.
LibreCat | DOI
 
[127]
2022 | Journal Article | LibreCat-ID: 36327 | OA
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.” Metallurgical and Materials Transactions A 53, no. 8 (2022): 3125–42. https://doi.org/10.1007/s11661-022-06732-z.
LibreCat | DOI | Download (ext.)
 
[126]
2022 | Journal Article | LibreCat-ID: 40154
Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022): 185. https://doi.org/10.3390/jfb13040185.
LibreCat | DOI
 
[125]
2022 | Journal Article | LibreCat-ID: 36328
Šlapáková, Michaela, Barbora Křivská, Klaudia Fekete, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.” Materials Characterization 190 (2022). https://doi.org/10.1016/j.matchar.2022.112005.
LibreCat | DOI | Download (ext.)
 
[124]
2022 | Journal Article | LibreCat-ID: 23794 | OA
Westermann, Hendrik, Alexander Reitz, Rolf Mahnken, Mirko Schaper, and Olexandr Grydin. “Microstructure Transformations in a Press Hardening Steel during Tailored Thermo‐mechanical Processing.” Steel Research International, 2022. https://doi.org/10.1002/srin.202100346.
LibreCat | DOI | Download (ext.)
 
[123]
2022 | Journal Article | LibreCat-ID: 29196 | OA
Hein, Maxwell, David Kokalj, Nelson Filipe Lopes Dias, Dominic Stangier, Hilke Oltmanns, Sudipta Pramanik, Manfred Kietzmann, et al. “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications.” Metals 12, no. 1 (2022). https://doi.org/10.3390/met12010122.
LibreCat | Files available | DOI | Download (ext.)
 
[122]
2022 | Journal Article | LibreCat-ID: 29811
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22MnB5.” Materials Science and Engineering: A 838 (2022). https://doi.org/10.1016/j.msea.2022.142780.
LibreCat | DOI | Download (ext.)
 
[121]
2022 | Journal Article | LibreCat-ID: 33723
Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022). https://doi.org/10.3390/jfb13040185.
LibreCat | DOI
 
[120]
2022 | Journal Article | LibreCat-ID: 34652
Vieth, P., M.-A. Garthe, Dietrich Voswinkel, Mirko Schaper, and Guido Grundmeier. “Enhancement of the Delamination Resistance of Adhesive Film Coated Surface Laser Melted Aluminum 7075-T6 Alloy by Aminophosphonic Acid Adsorption.” Surface and Coatings Technology 447 (2022). https://doi.org/10.1016/j.surfcoat.2022.128835.
LibreCat | DOI
 
[119]
2022 | Journal Article | LibreCat-ID: 31076
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, 2022. https://doi.org/10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[118]
2022 | Journal Article | LibreCat-ID: 31075
Teng, Zhenjie, Haoran Wu, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, Hanlon Zhang, Christian Boller, and Peter Starke. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” Advanced Engineering Materials, 2022. https://doi.org/10.1002/adem.202200022.
LibreCat | DOI
 
[117]
2022 | Journal Article | LibreCat-ID: 33498
Krüger, Jan Tobias, Kay-Peter Hoyer, Anatolii Andreiev, Mirko Schaper, and Carolin Zinn. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2022. https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[116]
2022 | Journal Article | LibreCat-ID: 41497
Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.” Crystals 12, no. 9 (2022). https://doi.org/10.3390/cryst12091217.
LibreCat | DOI
 
[115]
2022 | Journal Article | LibreCat-ID: 41494
Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022). https://doi.org/10.3390/jfb13040185.
LibreCat | DOI
 
[114]
2022 | Journal Article | LibreCat-ID: 41499
Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials 15, no. 12 (2022). https://doi.org/10.3390/ma15124072.
LibreCat | DOI
 
[113]
2022 | Journal Article | LibreCat-ID: 41496
Hein, Maxwell, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.” International Journal of Fatigue 166 (2022). https://doi.org/10.1016/j.ijfatigue.2022.107235.
LibreCat | DOI
 
[112]
2022 | Journal Article | LibreCat-ID: 32332
Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology 19 (2022): 2369–87. https://doi.org/10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[111]
2022 | Journal Article | LibreCat-ID: 41498
Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology 19 (2022): 2369–87. https://doi.org/10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 41495
Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.” Materials Science and Engineering: A 854 (2022). https://doi.org/10.1016/j.msea.2022.143887.
LibreCat | DOI
 
[109]
2022 | Journal Article | LibreCat-ID: 41500
Hein, Maxwell, Nelson Filipe Lopes Dias, Sudipta Pramanik, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials 15, no. 11 (2022). https://doi.org/10.3390/ma15113774.
LibreCat | DOI
 
[108]
2022 | Journal Article | LibreCat-ID: 41503
Pramanik, Sudipta, Frederik Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism 2, no. 2 (2022): 88–104. https://doi.org/10.3390/magnetism2020007.
LibreCat | DOI
 
[107]
2022 | Journal Article | LibreCat-ID: 41501
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters 321 (2022). https://doi.org/10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[106]
2022 | Journal Article | LibreCat-ID: 41502
Teng, Zhenjie, Haoran Wu, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, Hanlong Zhang, Christian Boller, and Peter Starke. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced Engineering Materials 24, no. 9 (2022). https://doi.org/10.1002/adem.202200022.
LibreCat | DOI
 
[105]
2022 | Journal Article | LibreCat-ID: 41493
Krüger, Jan Tobias, Kay-Peter Hoyer, Anatolii Andreiev, Mirko Schaper, and Carolin Zinn. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2022. https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[104]
2022 | Journal Article | LibreCat-ID: 34654
Kusoglu, Ihsan Murat, Pascal Vieth, Steffen Heiland, Florian Huber, Arne Lüddecke, Anna Rosa Ziefuss, Arno Kwade, et al. “Microstructure and Corrosion Properties of PBF-LB Produced Carbide Nanoparticles Additivated AlSi10Mg Parts.” Procedia CIRP 111 (2022): 10–13. https://doi.org/10.1016/j.procir.2022.08.046.
LibreCat | DOI
 
[103]
2022 | Journal Article | LibreCat-ID: 33340 | OA
Hein, Maxwell, Nelson Filipe Lopes Dias, Sudipta Pramanik, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, 2022.
LibreCat | Files available
 
[102]
2021 | Conference Paper | LibreCat-ID: 25047 | OA
Křivská, B, M Šlapáková, R Králík, L Bajtošová, M Cieslar, Olexandr Grydin, M Stolbchenko, and Mirko Schaper. “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip.” In IOP Conference Series: Materials Science and Engineering, Vol. 1178, 2021. https://doi.org/10.1088/1757-899x/1178/1/012035.
LibreCat | DOI | Download (ext.)
 
[101]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus, Marcel, Alexander Reitz, Olexandr Grydin, Julian Grenz, Andreas Schneidt, Rüdiger Erhardt, Thomas Tröster, and Mirko Schaper. “Forming Simulation of Tailored Press Hardened Parts.” In 13th European LS-DYNA Conference 2021, 2021.
LibreCat | Download (ext.)
 
[100]
2021 | Journal Article | LibreCat-ID: 26191
Voswinkel, Dietrich, Hüseyin Sapli, Dennis Kloidt, Thomas Heggemann, Werner Homberg, Olexandr Grydin, and Mirko Schaper. “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1190/1/012028.
LibreCat | DOI
 
[99]
2021 | Conference Paper | LibreCat-ID: 29812
Křivská, Barbora, Michaela Šlapáková, Peter Minárik, Klaudia Fekete, Rostislav Králík, Mykhailo Stolbchenko, Mirko Schaper, and Olexandr Grydin. “In-Situ TEM Observation of Intermetallic Phase Growth in Al-Steel Clad Sheet.” In APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2021). AIP Publishing, 2021. https://doi.org/10.1063/5.0067491.
LibreCat | DOI
 
[98]
2021 | Journal Article | LibreCat-ID: 24535
Neuser, Moritz, Olexandr Grydin, Anatolii Andreiev, and Mirko Schaper. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 2021. https://doi.org/10.3390/met11081304.
LibreCat | DOI
 
[97]
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, Fabian Kappe, M Busch, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, Gerson Meschut, and T Hausotte. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[96]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G, Mathias Bobbert, Marcus Böhme, Christian Dammann, Axel Dittes, Mina Gießmann, Christian Hühne, et al. “Hybridprofile Für Trag- Und Crashstrukturen.” In Intrinsische Hybridverbunde Für Leichtbautragstrukturen. Berlin, Heidelberg, 2021. https://doi.org/10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[95]
2021 | Journal Article | LibreCat-ID: 29089
Westermann, Hendrik, Alexander Reitz, Rolf Mahnken, Olexandr Grydin, and Mirko Schaper. “Constitutive Modeling of Viscoplasticity Including Phase Transformations for Graded Thermo‐mechanical Processing.” PAMM, 2021. https://doi.org/10.1002/pamm.202100041.
LibreCat | DOI
 
[94]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A 831 (2021). https://doi.org/10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[93]
2021 | Journal Article | LibreCat-ID: 41511
Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik 52, no. 7 (2021): 703–16. https://doi.org/10.1002/mawe.202000288.
LibreCat | DOI
 
[92]
2021 | Journal Article | LibreCat-ID: 41507
Garthe, Kai-Uwe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko Schaper. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal 28, no. 5 (2021): 833–40. https://doi.org/10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[91]
2021 | Journal Article | LibreCat-ID: 41506
Heiland, Steffen, Benjamin Milkereit, Kay-Peter Hoyer, Evgeny Zhuravlev, Olaf Kessler, and Mirko Schaper. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials 14, no. 23 (2021). https://doi.org/10.3390/ma14237190.
LibreCat | DOI
 
[90]
2021 | Journal Article | LibreCat-ID: 24790
Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters 306 (2021). https://doi.org/10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[89]
2021 | Journal Article | LibreCat-ID: 41516
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Carlo Franke, David Kokalj, Dominic Stangier, Viviane Filor, Rafael Hernán Mateus-Vargas, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology 421 (2021). https://doi.org/10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[88]
2021 | Journal Article | LibreCat-ID: 41512
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A 822 (2021). https://doi.org/10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[87]
2021 | Journal Article | LibreCat-ID: 41510
Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue 153 (2021). https://doi.org/10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[86]
2021 | Journal Article | LibreCat-ID: 41509
Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters 306 (2021). https://doi.org/10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[85]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[84]
2021 | Journal Article | LibreCat-ID: 41517
Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance 30, no. 11 (2021): 8048–56. https://doi.org/10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[83]
2021 | Journal Article | LibreCat-ID: 24243
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Carlo Franke, David Kokalj, Dominic Stangier, Viviane Filor, Rafael Hernán Mateus-Vargas, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, 2021. https://doi.org/10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[82]
2021 | Journal Article | LibreCat-ID: 29815 | OA
Křivská, Barbora, Michaela Šlapáková, Jozef Veselý, Martin Kihoulou, Klaudia Fekete, Peter Minárik, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials 14, no. 24 (2021). https://doi.org/10.3390/ma14247771.
LibreCat | DOI | Download (ext.)
 
[81]
2021 | Journal Article | LibreCat-ID: 24086
Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik 52 (2021): 703–16. https://doi.org/10.1002/mawe.202000288.
LibreCat | DOI
 
[80]
2021 | Journal Article | LibreCat-ID: 29813
Cieslar, Miroslav, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, Sára Belejová, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-Situ SEM and STEM.” Microscopy and Microanalysis 27, no. S2 (2021): 79–80. https://doi.org/10.1017/s1431927621013398.
LibreCat | DOI
 
[79]
2021 | Journal Article | LibreCat-ID: 41514
Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds 871 (2021). https://doi.org/10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[78]
2021 | Journal Article | LibreCat-ID: 29814
Křivská, Barbora, Michaela Šlapáková, Peter Minárik, Klaudia Fekete, Rostislav Králík, Mykhailo Stolbchenko, Mirko Schaper, and Olexandr Grydin. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.” Microscopy and Microanalysis 27, no. S2 (2021): 91–92. https://doi.org/10.1017/s1431927621013453.
LibreCat | DOI
 
[77]
2021 | Journal Article | LibreCat-ID: 41515
Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing 46 (2021). https://doi.org/10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[76]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[75]
2021 | Journal Article | LibreCat-ID: 24090
Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, 2021. https://doi.org/10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[74]
2021 | Journal Article | LibreCat-ID: 27509
Garthe, Kai-Uwe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko Schaper. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, 2021. https://doi.org/10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[73]
2021 | Journal Article | LibreCat-ID: 24087
Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, 2021. https://doi.org/10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[72]
2021 | Journal Article | LibreCat-ID: 23913
Neuser, Moritz, Olexandr Grydin, Anatolii Andreiev, and Mirko Schaper. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 2021. https://doi.org/10.3390/met11081304.
LibreCat | DOI
 
[71]
2021 | Journal Article | LibreCat-ID: 24565
Voswinkel, Dietrich, D. Kloidt, Olexandr Grydin, and Mirko Schaper. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.” Production Engineering 15, no. 2 (2021): 263–70. https://doi.org/10.1007/s11740-020-01006-2.
LibreCat | DOI
 
[70]
2021 | Journal Article | LibreCat-ID: 24566 | OA
Engelkemeier, Katja, Aijia Sun, Dietrich Voswinkel, Olexandr Grydin, Mirko Schaper, and Wolfgang Bremser. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” ChemElectroChem, 2021, 2155–68. https://doi.org/10.1002/celc.202100216.
LibreCat | DOI | Download (ext.)
 
[69]
2021 | Journal Article | LibreCat-ID: 23897
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[68]
2021 | Journal Article | LibreCat-ID: 23911
Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, 2021. https://doi.org/10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[67]
2021 | Journal Article | LibreCat-ID: 24088
Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, 2021. https://doi.org/10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[66]
2021 | Journal Article | LibreCat-ID: 23803 | OA
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization of Phase Transformations during Graded Thermo- Mechanical Treatment of Steel 22MnB5 by Means of Optical Methods .” Materials Data for Smart Forming Technologies, 2021.
LibreCat | Download (ext.)
 
[65]
2020 | Conference Paper | LibreCat-ID: 24567
Krivská, Barbora, Michaela Šlapáková, Martin Kihoulou, Rostislav Králík, Lucia Bajtošová, Miroslav Cieslar, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “Interdiffusion in Aluminum-Steel Clad Strip.” In Proc. 20th Conference of Czech and Slovak Physicists, 153–54, 2020.
LibreCat
 
[64]
2020 | Book Chapter | LibreCat-ID: 23801
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” In The Minerals, Metals & Materials Series. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-36628-5_7.
LibreCat | DOI | Download (ext.)
 
[63]
2020 | Book Chapter | LibreCat-ID: 24575
Grydin, Olexandr, Mykhailo Stolbchenko, and Mirko Schaper. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.” In Light Metals 2020, 1039–44. Cham, 2020. https://doi.org/10.1007/978-3-030-36408-3_141.
LibreCat | DOI
 
[62]
2020 | Journal Article | LibreCat-ID: 41519
Tillmann, Wolfgang, Leif Hagen, Christoph Schaak, J. Liß, Mirko Schaper, Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology 29, no. 6 (2020): 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[61]
2020 | Journal Article | LibreCat-ID: 41518
Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik 51, no. 11 (2020): 1452–64. https://doi.org/10.1002/mawe.202000109.
LibreCat | DOI
 
[60]
2020 | Journal Article | LibreCat-ID: 23797 | OA
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” Metallurgical and Materials Transactions A, 2020, 5628–38. https://doi.org/10.1007/s11661-020-05976-x.
LibreCat | DOI | Download (ext.)
 
[59]
2020 | Journal Article | LibreCat-ID: 24573 | OA
Grydin, Olexandr, Mykhailo Stolbchenko, Mirko Schaper, Sára Belejová, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, and Miroslav Cieslar. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals 10, no. 8 (2020). https://doi.org/10.3390/met10080987.
LibreCat | DOI | Download (ext.)
 
[58]
2020 | Journal Article | LibreCat-ID: 24100
Engelkemeier, Katja, Jörg Lindner, Julius Bürger, Kathrin Vaupel, Marc Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology 31 (2020): 095701. https://doi.org/10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[57]
2020 | Journal Article | LibreCat-ID: 24572
Stolbchenko, Mykhailo, Hanna Makeieva, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials 22, no. 6 (2020): 2009–29. https://doi.org/10.1177/1099636218792539.
LibreCat | DOI
 
[56]
2020 | Journal Article | LibreCat-ID: 41520
Wu, Haoran, T. Bill, Z.J. Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A 794 (2020). https://doi.org/10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[55]
2020 | Journal Article | LibreCat-ID: 41521
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology 394 (2020). https://doi.org/10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[54]
2020 | Journal Article | LibreCat-ID: 41522
Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik 51, no. 4 (2020): 517–30. https://doi.org/10.1002/mawe.201900191.
LibreCat | DOI
 
[53]
2020 | Journal Article | LibreCat-ID: 24571
Stolbchenko, Mykhailo, Yaroslav Frolov, Hanna Makeieva, Olexandr Grydin, Michael A. Tershakovec, and Mirko Schaper. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures 27, no. 18 (2020): 1599–1608. https://doi.org/10.1080/15376494.2018.1520941.
LibreCat | DOI
 
[52]
2020 | Journal Article | LibreCat-ID: 24254
Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, 1452–64. https://doi.org/10.1002/mawe.202000109.
LibreCat | DOI
 
[51]
2020 | Journal Article | LibreCat-ID: 24092
Tillmann, Wolfgang, Leif Hagen, Christopher Schaak, Jan Liß, Mirko Schaper, Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[50]
2020 | Journal Article | LibreCat-ID: 24255
Tillmann, W., L. Hagen, C. Schaak, J. Liß, Mirko Schaper, Kay-Peter Hoyer, M. E. Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[49]
2020 | Journal Article | LibreCat-ID: 24093
Wu, Haoran, Tobias Bill, Zhenjie Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 2020. https://doi.org/10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[48]
2020 | Journal Article | LibreCat-ID: 24094
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 2020. https://doi.org/10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[47]
2020 | Journal Article | LibreCat-ID: 24091
Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, 1452–64. https://doi.org/10.1002/mawe.202000109.
LibreCat | DOI
 
[46]
2020 | Journal Article | LibreCat-ID: 23899
Grydin, Olexandr, Manuel Matzelt, Anatolii Andreiev, Yaroslav Frolov, and Mirko Schaper. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” Advanced Engineering Materials, 2020. https://doi.org/10.1002/adem.202000130.
LibreCat | DOI
 
[45]
2020 | Journal Article | LibreCat-ID: 23896
Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslaw Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, 2020, 517–30. https://doi.org/10.1002/mawe.201900191.
LibreCat | DOI
 
[44]
2019 | Book Chapter | LibreCat-ID: 24097
Hoyer, Kay-Peter, and Mirko Schaper. “Alloy Design for Biomedical Applications in Additive Manufacturing.” In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. Cham, 2019. https://doi.org/10.1007/978-3-030-05861-6_44.
LibreCat | DOI
 
[43]
2019 | Book Chapter | LibreCat-ID: 24098
Tasche, Lennart, Kay-Peter Hoyer, Evgeny Zhuravlev, Guido Grundmeier, Mirko Schaper, and Olaf Keßler. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. Cham, 2019. https://doi.org/10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[42]
2019 | Book Chapter | LibreCat-ID: 41523
Tasche, Lennart, Kay-Peter Hoyer, Evgeny Zhuravlev, Guido Grundmeier, Mirko Schaper, and Olaf Keßler. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” In The Minerals, Metals & Materials Series. Cham: Springer International Publishing, 2019. https://doi.org/10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[41]
2019 | Journal Article | LibreCat-ID: 23907
Grydin, Olexandr, Nikolay Sotirov, Andrii Samsonenko, Nikolay Biba, Anatolii Andreiev, Mykhailo Stolbchenko, Teresa Behr, Iaroslav Frolov, and Mirko Schaper. “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082.” Materials Science Forum, 2019, 85–92. https://doi.org/10.4028/www.scientific.net/msf.949.85.
LibreCat | DOI
 
[40]
2019 | Journal Article | LibreCat-ID: 41524
Engelkemeier, Katja, Jörg K N Lindner, Julius Bürger, Kathrin Vaupel, Marc Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology 31, no. 9 (2019). https://doi.org/10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[39]
2019 | Journal Article | LibreCat-ID: 23900
Grydin, Olexandr, Anatolii Andreiev, Martin Joachim Holzweißig, Christian Johannes Rüsing, Kristina Duschik, Yaroslav Frolov, and Mirko Schaper. “Short Austenitization Treatment with Subsequent Press Hardening: Correlation between Process Parameters, Microstructure and Mechanical Properties.” Materials Science and Engineering: A, 2019, 176–95. https://doi.org/10.1016/j.msea.2019.02.025.
LibreCat | DOI
 
[38]
2019 | Journal Article | LibreCat-ID: 23901
Grydin, Olexandr, Anatolii Andreiev, Mergim Zogaj, Yaroslav Frolov, and Mirko Schaper. “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel.” Advanced Engineering Materials, 2019. https://doi.org/10.1002/adem.201900134.
LibreCat | DOI
 
[37]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018. https://doi.org/10.1109/itec.2018.8450250.
LibreCat | DOI
 
[36]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In 2018 IEEE Transportation Electrification Conference and Expo (ITEC). IEEE, 2018. https://doi.org/10.1109/itec.2018.8450250.
LibreCat | DOI
 
[35]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[34]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko Schaper, M. Peters, M. Burns, F. Hengsbach, and A. Altmann. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” In Contributed Papers from MS&T17, 2018. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[33]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, Thomas Tröster, Thomas Heggemann, H. Homberg, Mirko Schaper, J. Dietrich, Wolfgang Bremser, et al. “LHYBS – Lightweight Design by Novel Hybrid Materials,” 2018.
LibreCat
 
[32]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., Z. Wang, Thomas Tröster, and Mirko Schaper. “Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM,” 2018.
LibreCat
 
[31]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[30]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing 3, no. 4 (2018): 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[29]
2018 | Journal Article | LibreCat-ID: 41528
Engelkemeier, Katja, Christian Mücke, Kay-Peter Hoyer, and Mirko Schaper. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials 2, no. 1 (2018): 189–99. https://doi.org/10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[28]
2018 | Journal Article | LibreCat-ID: 41527
Engelkemeier, Katja, Kay-Peter Hoyer, and Mirko Schaper. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters 236 (2018): 752–56. https://doi.org/10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[27]
2018 | Journal Article | LibreCat-ID: 24107
Engelkemeier, Katja, Christian Mücke, Kay-Peter Hoyer, and Mirko Schaper. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, 2018, 189–99. https://doi.org/10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[26]
2018 | Journal Article | LibreCat-ID: 24106
Engelkemeier, Katja, Kay-Peter Hoyer, and Mirko Schaper. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, 2018, 752–56. https://doi.org/10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, Mathias Bobbert, Christian Dammann, Zheng Wang, Thomas Tröster, Rolf Mahnken, Gerson Meschut, and Mirko Schaper. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, 173–85. https://doi.org/10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 23902
Grydin, Olexandr, Anatolii Andreiev, Nikolay Sotirov, Mykhailo Stolbchenko, Teresa M. Behr, Anton Ashkelianets, Iaroslav Frolov, and Mirko Schaper. “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082.” JOM, 2018, 407–18. https://doi.org/10.1007/s11837-018-3144-1.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 23903
Lossen, Benjamin, Anatolii Andreiev, Mykhailo Stolbchenko, Werner Homberg, and Mirko Schaper. “Friction-Spinning—Grain Structure Modification and the Impact on Stress/Strain Behaviour.” Journal of Materials Processing Technology, 2018, 242–50. https://doi.org/10.1016/j.jmatprotec.2018.06.015.
LibreCat | DOI
 
[22]
2017 | Book Chapter | LibreCat-ID: 24117
Taube, Alexander, Wadim Reschetnik, Lorenz Pauli, Kay-Peter Hoyer, Gunter Kullmer, and Mirko Schaper. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen.” In Additive Fertigung von Bauteilen und Strukturen. Wiesbaden: Springer Vieweg, 2017. https://doi.org/10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[21]
2017 | Conference Paper | LibreCat-ID: 24119
Brüggemann, Jan-Peter, Wadim Reschetnik, Gunter Kullmer, Hans Albert Richard, Mehmet Esat Aydinöz, Kay-Peter Hoyer, and Mirko Schaper. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” In DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 11–22. Berlin, 2017.
LibreCat
 
[20]
2017 | Journal Article | LibreCat-ID: 23904
Grydin, Olexandr, Anatolii Andreiev, Arkadii Briukhanov, Zoia Briukhanova, and Mirko Schaper. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” Steel Research International, 2017. https://doi.org/10.1002/srin.201600397.
LibreCat | DOI
 
[19]
2017 | Journal Article | LibreCat-ID: 23909
Lossen, Benjamin, Anatolii Andreiev, Werner Homberg, and Mirko Schaper. “Friction-Spinning – Possibility of Grain Structure Adjustment.” Procedia Engineering, 2017, 1749–54. https://doi.org/10.1016/j.proeng.2017.10.933.
LibreCat | DOI
 
[18]
2017 | Book Chapter | LibreCat-ID: 23910
Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “A Rapid Heating Method for Press Hardening Processing.” In Proceedings of the 3rd Pan American Materials Congress. Cham, 2017. https://doi.org/10.1007/978-3-319-52132-9_72.
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 41529
Taube, Alexander, Wadim Reschetnik, Lorenz Pauli, Kay-Peter Hoyer, Gunter Kullmer, and Mirko Schaper. “Numerische Und Mechanische Untersuchung Additiv Gefertigter TiAl6V4 Gitterstrukturen.” In Additive Fertigung von Bauteilen Und Strukturen. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. https://doi.org/10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, Peter Koppa, F. Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[14]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design 133 (2017): 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2017. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[12]
2016 | Journal Article | LibreCat-ID: 41532
Tillmann, Wolfgang, Christoph Schaak, J. Nellesen, Mirko Schaper, Mehmet Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing 13 (2016): 93–102. https://doi.org/10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites 2 (2016): 272–98. https://doi.org/10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Mirko Schaper, and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., Mathias Bobbert, C. Dammann, Z. Wang, Mirko Schaper, Gerson Meschut, Rolf Mahnken, and Thomas Tröster. “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” 2016.
LibreCat
 
[8]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[7]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[6]
2016 | Journal Article | LibreCat-ID: 24110
Tillmann, Wolfgang, Christopher Schaak, Jens Nellesen, Mirko Schaper, Mehmet Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, 2016, 93–102. https://doi.org/10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[5]
2016 | Journal Article | LibreCat-ID: 23905
Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “Evolution of Microstructure and Properties of Steel 22MnB5 Due to Short Austenitization with Subsequent Quenching.” Steel Research International, 2016, 1733–41. https://doi.org/10.1002/srin.201600086.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Gerson Meschut, Mirko Schaper, and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” 2015.
LibreCat
 
[3]
2015 | Journal Article | LibreCat-ID: 41534
Niendorf, Thomas, Florian Brenne, Kay-Peter Hoyer, Dieter Schwarze, Mirko Schaper, Richard Grothe, Markus Wiesener, Guido Grundmeier, and Hans Jürgen Maier. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A 46, no. 7 (2015): 2829–33. https://doi.org/10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[2]
2015 | Journal Article | LibreCat-ID: 24112
Niendorf, Thomas, Florian Brenne, Kay-Peter Hoyer, Dieter Schwarze, Mirko Schaper, Richard Grothe, Markus Wiesener, Guido Grundmeier, and Hans Jürgen Maier. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, 2015, 2829–33. https://doi.org/10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[1]
2015 | Journal Article | LibreCat-ID: 23906
Andreiev, Anatolii, Oleksandr Golovko, Iaroslav Frolov, Florian Nürnberger, Lars Oliver Wolf, Mirko Schaper, and Olexandr Grydin. “Testing of Pipe Sections.” Materials Testing, 2015, 643–48. https://doi.org/10.3139/120.110759.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: Chicago

Export / Embed

158 Publications

Mark all

[158]
2025 | Journal Article | LibreCat-ID: 58133
Pramanik, Sudipta, Dennis Mileaege, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-Inspired Fe3Si Microporous Material.” Journal of Materials Engineering and Performance, 2025. https://doi.org/10.1007/s11665-024-10618-z.
LibreCat | DOI
 
[157]
2025 | Journal Article | LibreCat-ID: 58807
Neuser, Moritz, Pia Katharina Holtkamp, Kay-Peter Hoyer, Fabian Kappe, Safak Yildiz, Mathias Bobbert, Gerson Meschut, and Mirko Schaper. “Mechanical Properties and Joinability of the Near-Eutectic Aluminium Casting Alloy AlSi12.” The Journal of Materials: Design and Applications, Part L, 2025. https://doi.org/10.1177/14644207251319922.
LibreCat | DOI
 
[156]
2025 | Book Chapter | LibreCat-ID: 58950
Braun, Marcel Patrick Klaus, Olexandr Grydin, Kay-Peter Hoyer, and Mirko Schaper. “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System.” In The Minerals, Metals & Materials Series. Cham: Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-81061-9_12.
LibreCat | DOI
 
[155]
2025 | Conference Paper | LibreCat-ID: 59154
Neuser, Moritz, Kay-Peter Hoyer, and Mirko Schaper. “Processing of the Hypoeutectic AlSi9 Alloy with Twin-Roll Casting by Using Copper Shells.” In Materials Research Proceedings, Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-26.
LibreCat | DOI
 
[154]
2025 | Conference Paper | LibreCat-ID: 59155
Lauth, Martin, Kay-Peter Hoyer, Mirko Schaper, and Winfried Gräfen. “Cost-Effective Repair Solution for Twin-Roll-Caster Rollers.” In Materials Research Proceedings, Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-5.
LibreCat | DOI
 
[153]
2024 | Journal Article | LibreCat-ID: 52738
Milaege, Dennis, Niklas Eschemann, Kay-Peter Hoyer, and Mirko Schaper. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” Crystals 14, no. 2 (2024). https://doi.org/10.3390/cryst14020117.
LibreCat | DOI
 
[152]
2024 | Journal Article | LibreCat-ID: 57540
Mallow, Sina, Jette Broer, Benjamin Milkereit, Olexandr Grydin, Kay-Peter Hoyer, Kai-Uwe Garthe, Dennis Milaege, Viktoriya Boyko, Mirko Schaper, and Olaf Kessler. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” Production Engineering, 2024. https://doi.org/10.1007/s11740-024-01322-x.
LibreCat | DOI
 
[151]
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[150]
2023 | Journal Article | LibreCat-ID: 49107
Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Kay-Peter Hoyer, and Mirko Schaper. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals 13, no. 11 (2023). https://doi.org/10.3390/cryst13111592.
LibreCat | DOI
 
[149]
2023 | Conference Paper | LibreCat-ID: 43031
Borgert, Thomas, Moritz Neuser, Eugen Wiens, Olexandr Grydin, Werner Homberg, and Mirko Schaper. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” In Materials Research Proceedings, 25:187–94. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902417-24.
LibreCat | DOI
 
[148]
2023 | Journal Article | LibreCat-ID: 52405
Neuser, Moritz, Mirko Schaper, and Olexandr Grydin. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing 7, no. 4 (2023). https://doi.org/10.3390/jmmp7040132.
LibreCat | DOI
 
[147]
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, Moritz Neuser, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing 7, no. 5 (2023). https://doi.org/10.3390/jmmp7050169.
LibreCat | DOI
 
[146]
2023 | Conference Paper | LibreCat-ID: 52406
Grydin, Olexandr, Moritz Neuser, and Mirko Schaper. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.” In     Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France). Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-41341-4_61.
LibreCat | DOI
 
[145]
2023 | Book Chapter | LibreCat-ID: 41959
Grydin, Olexandr, Kai-Uwe Garthe, Xueyang Yuan, Jette Broer, Olaf Keßler, Rostislav Králík, Miroslav Cieslar, and Mirko Schaper. “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips.” In Light Metals 2023, edited by Stephan Broek, 1031–37. The Minerals, Metals & Materials Series. Cham: Springer Nature Switzerland, 2023. https://doi.org/10.1007/978-3-031-22532-1_137.
LibreCat | DOI | Download (ext.)
 
[144]
2023 | Journal Article | LibreCat-ID: 41492
Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, Jan Tobias Krüger, Florian Hengsbach, Alexander Kircheis, Weiyu Zhao, Jörg Fischer-Bühner, and Mirko Schaper. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders 2, no. 1 (2023): 59–74. https://doi.org/10.3390/powders2010005.
LibreCat | DOI
 
[143]
2023 | Journal Article | LibreCat-ID: 43441
Šlapáková, Michaela, Barbora Kihoulou, Jozef Veselý, Peter Minárik, Klaudia Fekete, Michal Knapek, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “3D-Structure of Intermetallic Interface Layer in Al–Steel Clad Material.” Vacuum 212 (2023). https://doi.org/10.1016/j.vacuum.2023.112043.
LibreCat | DOI
 
[142]
2023 | Book Chapter | LibreCat-ID: 45360
Haase, Michael, Maximilian Bieber, Frederik Tasche, Mirko Schaper, Kay-Peter Hoyer, Bernd Ponik, and Balázs Magyar. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” In Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast, Michael Eichmann, and Gerd Witt. München: Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
 
[141]
2023 | Journal Article | LibreCat-ID: 44078
Andreiev, Anatolii, Kay-Peter Hoyer, Florian Hengsbach, Michael Haase, Lennart Tasche, Kristina Duschik, and Mirko Schaper. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” Journal of Materials Processing Technology 317 (2023). https://doi.org/10.1016/j.jmatprotec.2023.117991.
LibreCat | DOI
 
[140]
2023 | Journal Article | LibreCat-ID: 46503
Pramanik, Sudipta, Kay-Peter Hoyer, and Mirko Schaper. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping Journal 29, no. 6 (2023): 1257–69. https://doi.org/10.1108/rpj-06-2022-0190.
LibreCat | DOI
 
[139]
2023 | Journal Article | LibreCat-ID: 46507
Pramanik, Sudipta, Dennis Milaege, Maxwell Hein, Anatolii Andreiev, Mirko Schaper, and Kay-Peter Hoyer. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” Advanced Engineering Materials 25, no. 14 (2023). https://doi.org/10.1002/adem.202201850.
LibreCat | DOI
 
[138]
2023 | Book Chapter | LibreCat-ID: 46870
Menge, Dennis, Dennis Milaege, Kay-Peter Hoyer, Hans-Joachim Schmid, and Mirko Schaper. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” In Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer. Bielefeld, Germany: transcript Verlag, 2023. https://doi.org/10.14361/9783839463772-007.
LibreCat | DOI
 
[137]
2023 | Journal Article | LibreCat-ID: 47122
Pramanik, Sudipta, Jan Tobias Krüger, Mirko Schaper, and Kay-Peter Hoyer. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, 2023. https://doi.org/10.1007/s11661-023-07186-7.
LibreCat | DOI
 
[136]
2022 | Conference Paper | LibreCat-ID: 36335 | OA
CIESLAR, Miroslav, Barbora KŘIVSKÁ, Rostislav KRÁLÍK, Lucia BAJTOŠOVÁ, Olexandr Grydin, Mykhailo STOLBCHENKO, and Mirko Schaper. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.” In METAL 2022 Conference Proeedings. TANGER Ltd., 2022. https://doi.org/10.37904/metal.2022.4438.
LibreCat | DOI | Download (ext.)
 
[135]
2022 | Journal Article | LibreCat-ID: 36332 | OA
Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[134]
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, Max Böhnke, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, and Gerson Meschut. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022. https://doi.org/10.1177/14644207221075838.
LibreCat | DOI
 
[133]
2022 | Journal Article | LibreCat-ID: 29505
Neuser, Moritz, Olexandr Grydin, Y. Frolov, and Mirko Schaper. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, 2022. https://doi.org/10.1007/s11740-022-01106-1.
LibreCat | DOI
 
[132]
2022 | Book Chapter | LibreCat-ID: 29771
Grydin, Olexandr, Dag Mortensen, Moritz Neuser, Dag Lindholm, Hallvard G. Fjaer, and Mirko Schaper. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.” In Light Metals 2022. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-030-92529-1_96.
LibreCat | DOI
 
[131]
2022 | Conference Paper | LibreCat-ID: 36339 | OA
BAJTOŠOVÁ, Lucia, Olexandr Grydin, Mykhailo STOLBCHENKO, Mirko Schaper, Barbora KŘIVSKÁ, Rostislav KRÁLÍK, Michaela ŠLAPÁKOVÁ, and Miroslav CIESLAR. “Phase Identification in Twin-Roll Cast Al-Li Alloys.” In METAL 2022 Conference Proeedings. TANGER Ltd., 2022. https://doi.org/10.37904/metal.2022.4437.
LibreCat | DOI | Download (ext.)
 
[130]
2022 | Journal Article | LibreCat-ID: 32188
Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials 15, no. 12 (2022). https://doi.org/10.3390/ma15124072.
LibreCat | DOI
 
[129]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, 2022, 1–16. https://doi.org/10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[128]
2022 | Journal Article | LibreCat-ID: 30519
Pramanik, Sudipta, Frederik Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism 2 (2022): 88–104. https://doi.org/10.3390/magnetism2020007.
LibreCat | DOI
 
[127]
2022 | Journal Article | LibreCat-ID: 36327 | OA
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.” Metallurgical and Materials Transactions A 53, no. 8 (2022): 3125–42. https://doi.org/10.1007/s11661-022-06732-z.
LibreCat | DOI | Download (ext.)
 
[126]
2022 | Journal Article | LibreCat-ID: 40154
Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022): 185. https://doi.org/10.3390/jfb13040185.
LibreCat | DOI
 
[125]
2022 | Journal Article | LibreCat-ID: 36328
Šlapáková, Michaela, Barbora Křivská, Klaudia Fekete, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.” Materials Characterization 190 (2022). https://doi.org/10.1016/j.matchar.2022.112005.
LibreCat | DOI | Download (ext.)
 
[124]
2022 | Journal Article | LibreCat-ID: 23794 | OA
Westermann, Hendrik, Alexander Reitz, Rolf Mahnken, Mirko Schaper, and Olexandr Grydin. “Microstructure Transformations in a Press Hardening Steel during Tailored Thermo‐mechanical Processing.” Steel Research International, 2022. https://doi.org/10.1002/srin.202100346.
LibreCat | DOI | Download (ext.)
 
[123]
2022 | Journal Article | LibreCat-ID: 29196 | OA
Hein, Maxwell, David Kokalj, Nelson Filipe Lopes Dias, Dominic Stangier, Hilke Oltmanns, Sudipta Pramanik, Manfred Kietzmann, et al. “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications.” Metals 12, no. 1 (2022). https://doi.org/10.3390/met12010122.
LibreCat | Files available | DOI | Download (ext.)
 
[122]
2022 | Journal Article | LibreCat-ID: 29811
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22MnB5.” Materials Science and Engineering: A 838 (2022). https://doi.org/10.1016/j.msea.2022.142780.
LibreCat | DOI | Download (ext.)
 
[121]
2022 | Journal Article | LibreCat-ID: 33723
Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022). https://doi.org/10.3390/jfb13040185.
LibreCat | DOI
 
[120]
2022 | Journal Article | LibreCat-ID: 34652
Vieth, P., M.-A. Garthe, Dietrich Voswinkel, Mirko Schaper, and Guido Grundmeier. “Enhancement of the Delamination Resistance of Adhesive Film Coated Surface Laser Melted Aluminum 7075-T6 Alloy by Aminophosphonic Acid Adsorption.” Surface and Coatings Technology 447 (2022). https://doi.org/10.1016/j.surfcoat.2022.128835.
LibreCat | DOI
 
[119]
2022 | Journal Article | LibreCat-ID: 31076
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, 2022. https://doi.org/10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[118]
2022 | Journal Article | LibreCat-ID: 31075
Teng, Zhenjie, Haoran Wu, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, Hanlon Zhang, Christian Boller, and Peter Starke. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” Advanced Engineering Materials, 2022. https://doi.org/10.1002/adem.202200022.
LibreCat | DOI
 
[117]
2022 | Journal Article | LibreCat-ID: 33498
Krüger, Jan Tobias, Kay-Peter Hoyer, Anatolii Andreiev, Mirko Schaper, and Carolin Zinn. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2022. https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[116]
2022 | Journal Article | LibreCat-ID: 41497
Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.” Crystals 12, no. 9 (2022). https://doi.org/10.3390/cryst12091217.
LibreCat | DOI
 
[115]
2022 | Journal Article | LibreCat-ID: 41494
Krüger, Jan Tobias, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, and Mirko Schaper. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials 13, no. 4 (2022). https://doi.org/10.3390/jfb13040185.
LibreCat | DOI
 
[114]
2022 | Journal Article | LibreCat-ID: 41499
Abdelaal, Osama, Florian Hengsbach, Mirko Schaper, and Kay-Peter Hoyer. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials 15, no. 12 (2022). https://doi.org/10.3390/ma15124072.
LibreCat | DOI
 
[113]
2022 | Journal Article | LibreCat-ID: 41496
Hein, Maxwell, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.” International Journal of Fatigue 166 (2022). https://doi.org/10.1016/j.ijfatigue.2022.107235.
LibreCat | DOI
 
[112]
2022 | Journal Article | LibreCat-ID: 32332
Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology 19 (2022): 2369–87. https://doi.org/10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[111]
2022 | Journal Article | LibreCat-ID: 41498
Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology 19 (2022): 2369–87. https://doi.org/10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 41495
Pramanik, Sudipta, Dennis Milaege, Kay-Peter Hoyer, and Mirko Schaper. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.” Materials Science and Engineering: A 854 (2022). https://doi.org/10.1016/j.msea.2022.143887.
LibreCat | DOI
 
[109]
2022 | Journal Article | LibreCat-ID: 41500
Hein, Maxwell, Nelson Filipe Lopes Dias, Sudipta Pramanik, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials 15, no. 11 (2022). https://doi.org/10.3390/ma15113774.
LibreCat | DOI
 
[108]
2022 | Journal Article | LibreCat-ID: 41503
Pramanik, Sudipta, Frederik Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism 2, no. 2 (2022): 88–104. https://doi.org/10.3390/magnetism2020007.
LibreCat | DOI
 
[107]
2022 | Journal Article | LibreCat-ID: 41501
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, David Kokalj, Dominic Stangier, Maxwell Hein, Kay-Peter Hoyer, Mirko Schaper, Daria Gödecke, Hilke Oltmanns, and Jessica Meißner. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters 321 (2022). https://doi.org/10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[106]
2022 | Journal Article | LibreCat-ID: 41502
Teng, Zhenjie, Haoran Wu, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, Hanlong Zhang, Christian Boller, and Peter Starke. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced Engineering Materials 24, no. 9 (2022). https://doi.org/10.1002/adem.202200022.
LibreCat | DOI
 
[105]
2022 | Journal Article | LibreCat-ID: 41493
Krüger, Jan Tobias, Kay-Peter Hoyer, Anatolii Andreiev, Mirko Schaper, and Carolin Zinn. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2022. https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[104]
2022 | Journal Article | LibreCat-ID: 34654
Kusoglu, Ihsan Murat, Pascal Vieth, Steffen Heiland, Florian Huber, Arne Lüddecke, Anna Rosa Ziefuss, Arno Kwade, et al. “Microstructure and Corrosion Properties of PBF-LB Produced Carbide Nanoparticles Additivated AlSi10Mg Parts.” Procedia CIRP 111 (2022): 10–13. https://doi.org/10.1016/j.procir.2022.08.046.
LibreCat | DOI
 
[103]
2022 | Journal Article | LibreCat-ID: 33340 | OA
Hein, Maxwell, Nelson Filipe Lopes Dias, Sudipta Pramanik, Dominic Stangier, Kay-Peter Hoyer, Wolfgang Tillmann, and Mirko Schaper. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, 2022.
LibreCat | Files available
 
[102]
2021 | Conference Paper | LibreCat-ID: 25047 | OA
Křivská, B, M Šlapáková, R Králík, L Bajtošová, M Cieslar, Olexandr Grydin, M Stolbchenko, and Mirko Schaper. “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip.” In IOP Conference Series: Materials Science and Engineering, Vol. 1178, 2021. https://doi.org/10.1088/1757-899x/1178/1/012035.
LibreCat | DOI | Download (ext.)
 
[101]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus, Marcel, Alexander Reitz, Olexandr Grydin, Julian Grenz, Andreas Schneidt, Rüdiger Erhardt, Thomas Tröster, and Mirko Schaper. “Forming Simulation of Tailored Press Hardened Parts.” In 13th European LS-DYNA Conference 2021, 2021.
LibreCat | Download (ext.)
 
[100]
2021 | Journal Article | LibreCat-ID: 26191
Voswinkel, Dietrich, Hüseyin Sapli, Dennis Kloidt, Thomas Heggemann, Werner Homberg, Olexandr Grydin, and Mirko Schaper. “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1190/1/012028.
LibreCat | DOI
 
[99]
2021 | Conference Paper | LibreCat-ID: 29812
Křivská, Barbora, Michaela Šlapáková, Peter Minárik, Klaudia Fekete, Rostislav Králík, Mykhailo Stolbchenko, Mirko Schaper, and Olexandr Grydin. “In-Situ TEM Observation of Intermetallic Phase Growth in Al-Steel Clad Sheet.” In APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2021). AIP Publishing, 2021. https://doi.org/10.1063/5.0067491.
LibreCat | DOI
 
[98]
2021 | Journal Article | LibreCat-ID: 24535
Neuser, Moritz, Olexandr Grydin, Anatolii Andreiev, and Mirko Schaper. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 2021. https://doi.org/10.3390/met11081304.
LibreCat | DOI
 
[97]
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, Fabian Kappe, M Busch, Olexandr Grydin, Mathias Bobbert, Mirko Schaper, Gerson Meschut, and T Hausotte. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[96]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G, Mathias Bobbert, Marcus Böhme, Christian Dammann, Axel Dittes, Mina Gießmann, Christian Hühne, et al. “Hybridprofile Für Trag- Und Crashstrukturen.” In Intrinsische Hybridverbunde Für Leichtbautragstrukturen. Berlin, Heidelberg, 2021. https://doi.org/10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[95]
2021 | Journal Article | LibreCat-ID: 29089
Westermann, Hendrik, Alexander Reitz, Rolf Mahnken, Olexandr Grydin, and Mirko Schaper. “Constitutive Modeling of Viscoplasticity Including Phase Transformations for Graded Thermo‐mechanical Processing.” PAMM, 2021. https://doi.org/10.1002/pamm.202100041.
LibreCat | DOI
 
[94]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A 831 (2021). https://doi.org/10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[93]
2021 | Journal Article | LibreCat-ID: 41511
Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik 52, no. 7 (2021): 703–16. https://doi.org/10.1002/mawe.202000288.
LibreCat | DOI
 
[92]
2021 | Journal Article | LibreCat-ID: 41507
Garthe, Kai-Uwe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko Schaper. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal 28, no. 5 (2021): 833–40. https://doi.org/10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[91]
2021 | Journal Article | LibreCat-ID: 41506
Heiland, Steffen, Benjamin Milkereit, Kay-Peter Hoyer, Evgeny Zhuravlev, Olaf Kessler, and Mirko Schaper. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials 14, no. 23 (2021). https://doi.org/10.3390/ma14237190.
LibreCat | DOI
 
[90]
2021 | Journal Article | LibreCat-ID: 24790
Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters 306 (2021). https://doi.org/10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[89]
2021 | Journal Article | LibreCat-ID: 41516
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Carlo Franke, David Kokalj, Dominic Stangier, Viviane Filor, Rafael Hernán Mateus-Vargas, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology 421 (2021). https://doi.org/10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[88]
2021 | Journal Article | LibreCat-ID: 41512
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A 822 (2021). https://doi.org/10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[87]
2021 | Journal Article | LibreCat-ID: 41510
Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue 153 (2021). https://doi.org/10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[86]
2021 | Journal Article | LibreCat-ID: 41509
Krüger, Jan Tobias, Kay-Peter Hoyer, and Mirko Schaper. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters 306 (2021). https://doi.org/10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[85]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[84]
2021 | Journal Article | LibreCat-ID: 41517
Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance 30, no. 11 (2021): 8048–56. https://doi.org/10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[83]
2021 | Journal Article | LibreCat-ID: 24243
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Carlo Franke, David Kokalj, Dominic Stangier, Viviane Filor, Rafael Hernán Mateus-Vargas, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, 2021. https://doi.org/10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[82]
2021 | Journal Article | LibreCat-ID: 29815 | OA
Křivská, Barbora, Michaela Šlapáková, Jozef Veselý, Martin Kihoulou, Klaudia Fekete, Peter Minárik, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials 14, no. 24 (2021). https://doi.org/10.3390/ma14247771.
LibreCat | DOI | Download (ext.)
 
[81]
2021 | Journal Article | LibreCat-ID: 24086
Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik 52 (2021): 703–16. https://doi.org/10.1002/mawe.202000288.
LibreCat | DOI
 
[80]
2021 | Journal Article | LibreCat-ID: 29813
Cieslar, Miroslav, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, Sára Belejová, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-Situ SEM and STEM.” Microscopy and Microanalysis 27, no. S2 (2021): 79–80. https://doi.org/10.1017/s1431927621013398.
LibreCat | DOI
 
[79]
2021 | Journal Article | LibreCat-ID: 41514
Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds 871 (2021). https://doi.org/10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[78]
2021 | Journal Article | LibreCat-ID: 29814
Křivská, Barbora, Michaela Šlapáková, Peter Minárik, Klaudia Fekete, Rostislav Králík, Mykhailo Stolbchenko, Mirko Schaper, and Olexandr Grydin. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.” Microscopy and Microanalysis 27, no. S2 (2021): 91–92. https://doi.org/10.1017/s1431927621013453.
LibreCat | DOI
 
[77]
2021 | Journal Article | LibreCat-ID: 41515
Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing 46 (2021). https://doi.org/10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[76]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[75]
2021 | Journal Article | LibreCat-ID: 24090
Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, 2021. https://doi.org/10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[74]
2021 | Journal Article | LibreCat-ID: 27509
Garthe, Kai-Uwe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko Schaper. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, 2021. https://doi.org/10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[73]
2021 | Journal Article | LibreCat-ID: 24087
Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, 2021. https://doi.org/10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[72]
2021 | Journal Article | LibreCat-ID: 23913
Neuser, Moritz, Olexandr Grydin, Anatolii Andreiev, and Mirko Schaper. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 2021. https://doi.org/10.3390/met11081304.
LibreCat | DOI
 
[71]
2021 | Journal Article | LibreCat-ID: 24565
Voswinkel, Dietrich, D. Kloidt, Olexandr Grydin, and Mirko Schaper. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.” Production Engineering 15, no. 2 (2021): 263–70. https://doi.org/10.1007/s11740-020-01006-2.
LibreCat | DOI
 
[70]
2021 | Journal Article | LibreCat-ID: 24566 | OA
Engelkemeier, Katja, Aijia Sun, Dietrich Voswinkel, Olexandr Grydin, Mirko Schaper, and Wolfgang Bremser. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” ChemElectroChem, 2021, 2155–68. https://doi.org/10.1002/celc.202100216.
LibreCat | DOI | Download (ext.)
 
[69]
2021 | Journal Article | LibreCat-ID: 23897
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[68]
2021 | Journal Article | LibreCat-ID: 23911
Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, 2021. https://doi.org/10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[67]
2021 | Journal Article | LibreCat-ID: 24088
Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, 2021. https://doi.org/10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[66]
2021 | Journal Article | LibreCat-ID: 23803 | OA
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization of Phase Transformations during Graded Thermo- Mechanical Treatment of Steel 22MnB5 by Means of Optical Methods .” Materials Data for Smart Forming Technologies, 2021.
LibreCat | Download (ext.)
 
[65]
2020 | Conference Paper | LibreCat-ID: 24567
Krivská, Barbora, Michaela Šlapáková, Martin Kihoulou, Rostislav Králík, Lucia Bajtošová, Miroslav Cieslar, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “Interdiffusion in Aluminum-Steel Clad Strip.” In Proc. 20th Conference of Czech and Slovak Physicists, 153–54, 2020.
LibreCat
 
[64]
2020 | Book Chapter | LibreCat-ID: 23801
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” In The Minerals, Metals & Materials Series. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-36628-5_7.
LibreCat | DOI | Download (ext.)
 
[63]
2020 | Book Chapter | LibreCat-ID: 24575
Grydin, Olexandr, Mykhailo Stolbchenko, and Mirko Schaper. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.” In Light Metals 2020, 1039–44. Cham, 2020. https://doi.org/10.1007/978-3-030-36408-3_141.
LibreCat | DOI
 
[62]
2020 | Journal Article | LibreCat-ID: 41519
Tillmann, Wolfgang, Leif Hagen, Christoph Schaak, J. Liß, Mirko Schaper, Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology 29, no. 6 (2020): 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[61]
2020 | Journal Article | LibreCat-ID: 41518
Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik 51, no. 11 (2020): 1452–64. https://doi.org/10.1002/mawe.202000109.
LibreCat | DOI
 
[60]
2020 | Journal Article | LibreCat-ID: 23797 | OA
Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” Metallurgical and Materials Transactions A, 2020, 5628–38. https://doi.org/10.1007/s11661-020-05976-x.
LibreCat | DOI | Download (ext.)
 
[59]
2020 | Journal Article | LibreCat-ID: 24573 | OA
Grydin, Olexandr, Mykhailo Stolbchenko, Mirko Schaper, Sára Belejová, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, and Miroslav Cieslar. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals 10, no. 8 (2020). https://doi.org/10.3390/met10080987.
LibreCat | DOI | Download (ext.)
 
[58]
2020 | Journal Article | LibreCat-ID: 24100
Engelkemeier, Katja, Jörg Lindner, Julius Bürger, Kathrin Vaupel, Marc Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology 31 (2020): 095701. https://doi.org/10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[57]
2020 | Journal Article | LibreCat-ID: 24572
Stolbchenko, Mykhailo, Hanna Makeieva, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials 22, no. 6 (2020): 2009–29. https://doi.org/10.1177/1099636218792539.
LibreCat | DOI
 
[56]
2020 | Journal Article | LibreCat-ID: 41520
Wu, Haoran, T. Bill, Z.J. Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A 794 (2020). https://doi.org/10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[55]
2020 | Journal Article | LibreCat-ID: 41521
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology 394 (2020). https://doi.org/10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[54]
2020 | Journal Article | LibreCat-ID: 41522
Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik 51, no. 4 (2020): 517–30. https://doi.org/10.1002/mawe.201900191.
LibreCat | DOI
 
[53]
2020 | Journal Article | LibreCat-ID: 24571
Stolbchenko, Mykhailo, Yaroslav Frolov, Hanna Makeieva, Olexandr Grydin, Michael A. Tershakovec, and Mirko Schaper. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures 27, no. 18 (2020): 1599–1608. https://doi.org/10.1080/15376494.2018.1520941.
LibreCat | DOI
 
[52]
2020 | Journal Article | LibreCat-ID: 24254
Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, 1452–64. https://doi.org/10.1002/mawe.202000109.
LibreCat | DOI
 
[51]
2020 | Journal Article | LibreCat-ID: 24092
Tillmann, Wolfgang, Leif Hagen, Christopher Schaak, Jan Liß, Mirko Schaper, Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[50]
2020 | Journal Article | LibreCat-ID: 24255
Tillmann, W., L. Hagen, C. Schaak, J. Liß, Mirko Schaper, Kay-Peter Hoyer, M. E. Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[49]
2020 | Journal Article | LibreCat-ID: 24093
Wu, Haoran, Tobias Bill, Zhenjie Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 2020. https://doi.org/10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[48]
2020 | Journal Article | LibreCat-ID: 24094
Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen, Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 2020. https://doi.org/10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[47]
2020 | Journal Article | LibreCat-ID: 24091
Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, 1452–64. https://doi.org/10.1002/mawe.202000109.
LibreCat | DOI
 
[46]
2020 | Journal Article | LibreCat-ID: 23899
Grydin, Olexandr, Manuel Matzelt, Anatolii Andreiev, Yaroslav Frolov, and Mirko Schaper. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” Advanced Engineering Materials, 2020. https://doi.org/10.1002/adem.202000130.
LibreCat | DOI
 
[45]
2020 | Journal Article | LibreCat-ID: 23896
Andreiev, Anatolii, Kay-Peter Hoyer, Olexandr Grydin, Yaroslaw Frolov, and Mirko Schaper. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, 2020, 517–30. https://doi.org/10.1002/mawe.201900191.
LibreCat | DOI
 
[44]
2019 | Book Chapter | LibreCat-ID: 24097
Hoyer, Kay-Peter, and Mirko Schaper. “Alloy Design for Biomedical Applications in Additive Manufacturing.” In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. Cham, 2019. https://doi.org/10.1007/978-3-030-05861-6_44.
LibreCat | DOI
 
[43]
2019 | Book Chapter | LibreCat-ID: 24098
Tasche, Lennart, Kay-Peter Hoyer, Evgeny Zhuravlev, Guido Grundmeier, Mirko Schaper, and Olaf Keßler. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. Cham, 2019. https://doi.org/10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[42]
2019 | Book Chapter | LibreCat-ID: 41523
Tasche, Lennart, Kay-Peter Hoyer, Evgeny Zhuravlev, Guido Grundmeier, Mirko Schaper, and Olaf Keßler. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” In The Minerals, Metals & Materials Series. Cham: Springer International Publishing, 2019. https://doi.org/10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[41]
2019 | Journal Article | LibreCat-ID: 23907
Grydin, Olexandr, Nikolay Sotirov, Andrii Samsonenko, Nikolay Biba, Anatolii Andreiev, Mykhailo Stolbchenko, Teresa Behr, Iaroslav Frolov, and Mirko Schaper. “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082.” Materials Science Forum, 2019, 85–92. https://doi.org/10.4028/www.scientific.net/msf.949.85.
LibreCat | DOI
 
[40]
2019 | Journal Article | LibreCat-ID: 41524
Engelkemeier, Katja, Jörg K N Lindner, Julius Bürger, Kathrin Vaupel, Marc Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology 31, no. 9 (2019). https://doi.org/10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[39]
2019 | Journal Article | LibreCat-ID: 23900
Grydin, Olexandr, Anatolii Andreiev, Martin Joachim Holzweißig, Christian Johannes Rüsing, Kristina Duschik, Yaroslav Frolov, and Mirko Schaper. “Short Austenitization Treatment with Subsequent Press Hardening: Correlation between Process Parameters, Microstructure and Mechanical Properties.” Materials Science and Engineering: A, 2019, 176–95. https://doi.org/10.1016/j.msea.2019.02.025.
LibreCat | DOI
 
[38]
2019 | Journal Article | LibreCat-ID: 23901
Grydin, Olexandr, Anatolii Andreiev, Mergim Zogaj, Yaroslav Frolov, and Mirko Schaper. “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel.” Advanced Engineering Materials, 2019. https://doi.org/10.1002/adem.201900134.
LibreCat | DOI
 
[37]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018. https://doi.org/10.1109/itec.2018.8450250.
LibreCat | DOI
 
[36]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, Bernd Ponick, Alexander Taube, Kay-Peter Hoyer, Mirko Schaper, Stefan Lammers, Tobias Lieneke, and Detmar Zimmer. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” In 2018 IEEE Transportation Electrification Conference and Expo (ITEC). IEEE, 2018. https://doi.org/10.1109/itec.2018.8450250.
LibreCat | DOI
 
[35]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[34]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko Schaper, M. Peters, M. Burns, F. Hengsbach, and A. Altmann. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” In Contributed Papers from MS&T17, 2018. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[33]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, Thomas Tröster, Thomas Heggemann, H. Homberg, Mirko Schaper, J. Dietrich, Wolfgang Bremser, et al. “LHYBS – Lightweight Design by Novel Hybrid Materials,” 2018.
LibreCat
 
[32]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., Z. Wang, Thomas Tröster, and Mirko Schaper. “Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM,” 2018.
LibreCat
 
[31]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[30]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing 3, no. 4 (2018): 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[29]
2018 | Journal Article | LibreCat-ID: 41528
Engelkemeier, Katja, Christian Mücke, Kay-Peter Hoyer, and Mirko Schaper. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials 2, no. 1 (2018): 189–99. https://doi.org/10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[28]
2018 | Journal Article | LibreCat-ID: 41527
Engelkemeier, Katja, Kay-Peter Hoyer, and Mirko Schaper. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters 236 (2018): 752–56. https://doi.org/10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[27]
2018 | Journal Article | LibreCat-ID: 24107
Engelkemeier, Katja, Christian Mücke, Kay-Peter Hoyer, and Mirko Schaper. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, 2018, 189–99. https://doi.org/10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[26]
2018 | Journal Article | LibreCat-ID: 24106
Engelkemeier, Katja, Kay-Peter Hoyer, and Mirko Schaper. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, 2018, 752–56. https://doi.org/10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, Mathias Bobbert, Christian Dammann, Zheng Wang, Thomas Tröster, Rolf Mahnken, Gerson Meschut, and Mirko Schaper. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, 173–85. https://doi.org/10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 23902
Grydin, Olexandr, Anatolii Andreiev, Nikolay Sotirov, Mykhailo Stolbchenko, Teresa M. Behr, Anton Ashkelianets, Iaroslav Frolov, and Mirko Schaper. “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082.” JOM, 2018, 407–18. https://doi.org/10.1007/s11837-018-3144-1.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 23903
Lossen, Benjamin, Anatolii Andreiev, Mykhailo Stolbchenko, Werner Homberg, and Mirko Schaper. “Friction-Spinning—Grain Structure Modification and the Impact on Stress/Strain Behaviour.” Journal of Materials Processing Technology, 2018, 242–50. https://doi.org/10.1016/j.jmatprotec.2018.06.015.
LibreCat | DOI
 
[22]
2017 | Book Chapter | LibreCat-ID: 24117
Taube, Alexander, Wadim Reschetnik, Lorenz Pauli, Kay-Peter Hoyer, Gunter Kullmer, and Mirko Schaper. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen.” In Additive Fertigung von Bauteilen und Strukturen. Wiesbaden: Springer Vieweg, 2017. https://doi.org/10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[21]
2017 | Conference Paper | LibreCat-ID: 24119
Brüggemann, Jan-Peter, Wadim Reschetnik, Gunter Kullmer, Hans Albert Richard, Mehmet Esat Aydinöz, Kay-Peter Hoyer, and Mirko Schaper. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” In DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 11–22. Berlin, 2017.
LibreCat
 
[20]
2017 | Journal Article | LibreCat-ID: 23904
Grydin, Olexandr, Anatolii Andreiev, Arkadii Briukhanov, Zoia Briukhanova, and Mirko Schaper. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” Steel Research International, 2017. https://doi.org/10.1002/srin.201600397.
LibreCat | DOI
 
[19]
2017 | Journal Article | LibreCat-ID: 23909
Lossen, Benjamin, Anatolii Andreiev, Werner Homberg, and Mirko Schaper. “Friction-Spinning – Possibility of Grain Structure Adjustment.” Procedia Engineering, 2017, 1749–54. https://doi.org/10.1016/j.proeng.2017.10.933.
LibreCat | DOI
 
[18]
2017 | Book Chapter | LibreCat-ID: 23910
Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “A Rapid Heating Method for Press Hardening Processing.” In Proceedings of the 3rd Pan American Materials Congress. Cham, 2017. https://doi.org/10.1007/978-3-319-52132-9_72.
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 41529
Taube, Alexander, Wadim Reschetnik, Lorenz Pauli, Kay-Peter Hoyer, Gunter Kullmer, and Mirko Schaper. “Numerische Und Mechanische Untersuchung Additiv Gefertigter TiAl6V4 Gitterstrukturen.” In Additive Fertigung von Bauteilen Und Strukturen. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. https://doi.org/10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, Peter Koppa, F. Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[14]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design 133 (2017): 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2017. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[12]
2016 | Journal Article | LibreCat-ID: 41532
Tillmann, Wolfgang, Christoph Schaak, J. Nellesen, Mirko Schaper, Mehmet Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing 13 (2016): 93–102. https://doi.org/10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites 2 (2016): 272–98. https://doi.org/10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Mirko Schaper, and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., Mathias Bobbert, C. Dammann, Z. Wang, Mirko Schaper, Gerson Meschut, Rolf Mahnken, and Thomas Tröster. “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” 2016.
LibreCat
 
[8]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[7]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[6]
2016 | Journal Article | LibreCat-ID: 24110
Tillmann, Wolfgang, Christopher Schaak, Jens Nellesen, Mirko Schaper, Mehmet Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, 2016, 93–102. https://doi.org/10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[5]
2016 | Journal Article | LibreCat-ID: 23905
Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “Evolution of Microstructure and Properties of Steel 22MnB5 Due to Short Austenitization with Subsequent Quenching.” Steel Research International, 2016, 1733–41. https://doi.org/10.1002/srin.201600086.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Gerson Meschut, Mirko Schaper, and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” 2015.
LibreCat
 
[3]
2015 | Journal Article | LibreCat-ID: 41534
Niendorf, Thomas, Florian Brenne, Kay-Peter Hoyer, Dieter Schwarze, Mirko Schaper, Richard Grothe, Markus Wiesener, Guido Grundmeier, and Hans Jürgen Maier. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A 46, no. 7 (2015): 2829–33. https://doi.org/10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[2]
2015 | Journal Article | LibreCat-ID: 24112
Niendorf, Thomas, Florian Brenne, Kay-Peter Hoyer, Dieter Schwarze, Mirko Schaper, Richard Grothe, Markus Wiesener, Guido Grundmeier, and Hans Jürgen Maier. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, 2015, 2829–33. https://doi.org/10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[1]
2015 | Journal Article | LibreCat-ID: 23906
Andreiev, Anatolii, Oleksandr Golovko, Iaroslav Frolov, Florian Nürnberger, Lars Oliver Wolf, Mirko Schaper, and Olexandr Grydin. “Testing of Pipe Sections.” Materials Testing, 2015, 643–48. https://doi.org/10.3139/120.110759.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: Chicago

Export / Embed