Mirko Schaper

schaper@lwk.uni-paderborn.de
ID
43720

158 Publications

Mark all

[158]
2025 | Journal Article | LibreCat-ID: 58133
S. Pramanik, D. Mileaege, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material,” Journal of Materials Engineering and Performance, 2025, doi: 10.1007/s11665-024-10618-z.
LibreCat | DOI
 
[157]
2025 | Journal Article | LibreCat-ID: 58807
M. Neuser et al., “Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12,” The Journal of Materials: Design and Applications, Part L, 2025, doi: 10.1177/14644207251319922.
LibreCat | DOI
 
[156]
2025 | Book Chapter | LibreCat-ID: 58950
M. P. K. Braun, O. Grydin, K.-P. Hoyer, and M. Schaper, “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System,” in The Minerals, Metals & Materials Series, Cham: Springer Nature Switzerland, 2025.
LibreCat | DOI
 
[155]
2025 | Conference Paper | LibreCat-ID: 59154
M. Neuser, K.-P. Hoyer, and M. Schaper, “Processing of the hypoeutectic AlSi9 alloy with twin-roll casting by using copper shells,” in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-26.
LibreCat | DOI
 
[154]
2025 | Conference Paper | LibreCat-ID: 59155
M. Lauth, K.-P. Hoyer, M. Schaper, and W. Gräfen, “Cost-effective repair solution for twin-roll-caster rollers,” in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-5.
LibreCat | DOI
 
[153]
2024 | Journal Article | LibreCat-ID: 52738
D. Milaege, N. Eschemann, K.-P. Hoyer, and M. Schaper, “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion,” Crystals, vol. 14, no. 2, Art. no. 117, 2024, doi: 10.3390/cryst14020117.
LibreCat | DOI
 
[152]
2024 | Journal Article | LibreCat-ID: 57540
S. Mallow et al., “Process chain of a twin-roll cast aluminium-copper-lithium alloy,” Production Engineering, 2024, doi: 10.1007/s11740-024-01322-x.
LibreCat | DOI
 
[151]
2023 | Journal Article | LibreCat-ID: 47536
T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster, “Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology,” International Journal of Material Forming, vol. 16, no. 6, Art. no. 59, 2023, doi: 10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[150]
2023 | Journal Article | LibreCat-ID: 49107
S. Pramanik, D. Milaege, M. Hein, K.-P. Hoyer, and M. Schaper, “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach,” Crystals, vol. 13, no. 11, Art. no. 1592, 2023, doi: 10.3390/cryst13111592.
LibreCat | DOI
 
[149]
2023 | Conference Paper | LibreCat-ID: 43031
T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 187–194, doi: 10.21741/9781644902417-24.
LibreCat | DOI
 
[148]
2023 | Journal Article | LibreCat-ID: 52405
M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132.
LibreCat | DOI
 
[147]
2023 | Journal Article | LibreCat-ID: 47535
T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi: 10.3390/jmmp7050169.
LibreCat | DOI
 
[146]
2023 | Conference Paper | LibreCat-ID: 52406
O. Grydin, M. Neuser, and M. Schaper, “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy,” 2023, doi: 10.1007/978-3-031-41341-4_61.
LibreCat | DOI
 
[145]
2023 | Book Chapter | LibreCat-ID: 41959
O. Grydin et al., “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips,” in Light Metals 2023, S. Broek, Ed. Cham: Springer Nature Switzerland, 2023, pp. 1031–1037.
LibreCat | DOI | Download (ext.)
 
[144]
2023 | Journal Article | LibreCat-ID: 41492
S. Pramanik et al., “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy,” Powders, vol. 2, no. 1, pp. 59–74, 2023, doi: 10.3390/powders2010005.
LibreCat | DOI
 
[143]
2023 | Journal Article | LibreCat-ID: 43441
M. Šlapáková et al., “3D-structure of intermetallic interface layer in Al–steel clad material,” Vacuum, vol. 212, Art. no. 112043, 2023, doi: 10.1016/j.vacuum.2023.112043.
LibreCat | DOI
 
[142]
2023 | Book Chapter | LibreCat-ID: 45360
M. Haase et al., “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,” in Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
 
[141]
2023 | Journal Article | LibreCat-ID: 44078
A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,” Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi: 10.1016/j.jmatprotec.2023.117991.
LibreCat | DOI
 
[140]
2023 | Journal Article | LibreCat-ID: 46503
S. Pramanik, K.-P. Hoyer, and M. Schaper, “Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples,” Rapid Prototyping Journal, vol. 29, no. 6, pp. 1257–1269, 2023, doi: 10.1108/rpj-06-2022-0190.
LibreCat | DOI
 
[139]
2023 | Journal Article | LibreCat-ID: 46507
S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, and K.-P. Hoyer, “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures,” Advanced Engineering Materials, vol. 25, no. 14, 2023, doi: 10.1002/adem.202201850.
LibreCat | DOI
 
[138]
2023 | Book Chapter | LibreCat-ID: 46870
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.
LibreCat | DOI
 
[137]
2023 | Journal Article | LibreCat-ID: 47122
S. Pramanik, J. T. Krüger, M. Schaper, and K.-P. Hoyer, “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution,” Metallurgical and Materials Transactions A, 2023, doi: 10.1007/s11661-023-07186-7.
LibreCat | DOI
 
[136]
2022 | Conference Paper | LibreCat-ID: 36335 | OA
M. CIESLAR et al., “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4438.
LibreCat | DOI | Download (ext.)
 
[135]
2022 | Journal Article | LibreCat-ID: 36332 | OA
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[134]
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat | DOI
 
[133]
2022 | Journal Article | LibreCat-ID: 29505
M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.
LibreCat | DOI
 
[132]
2022 | Book Chapter | LibreCat-ID: 29771
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[131]
2022 | Conference Paper | LibreCat-ID: 36339 | OA
L. BAJTOŠOVÁ et al., “Phase identification in twin-roll cast Al-Li alloys,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4437.
LibreCat | DOI | Download (ext.)
 
[130]
2022 | Journal Article | LibreCat-ID: 32188
O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio,” Materials, vol. 15, no. 12, Art. no. 4072, 2022, doi: 10.3390/ma15124072.
LibreCat | DOI
 
[129]
2022 | Journal Article | LibreCat-ID: 34097
D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,” Advanced Composite Materials, pp. 1–16, 2022, doi: 10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[128]
2022 | Journal Article | LibreCat-ID: 30519
S. Pramanik, F. Tasche, K.-P. Hoyer, and M. Schaper, “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study,” Magnetism, vol. 2, pp. 88–104, 2022, doi: 10.3390/magnetism2020007.
LibreCat | DOI
 
[127]
2022 | Journal Article | LibreCat-ID: 36327 | OA
A. Reitz, O. Grydin, and M. Schaper, “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel,” Metallurgical and Materials Transactions A, vol. 53, no. 8, pp. 3125–3142, 2022, doi: 10.1007/s11661-022-06732-z.
LibreCat | DOI | Download (ext.)
 
[126]
2022 | Journal Article | LibreCat-ID: 40154
J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials, vol. 13, no. 4, p. 185, 2022, doi: 10.3390/jfb13040185.
LibreCat | DOI
 
[125]
2022 | Journal Article | LibreCat-ID: 36328
M. Šlapáková et al., “The influence of surface on direction of diffusion in Al-Fe clad material,” Materials Characterization, vol. 190, Art. no. 112005, 2022, doi: 10.1016/j.matchar.2022.112005.
LibreCat | DOI | Download (ext.)
 
[124]
2022 | Journal Article | LibreCat-ID: 23794 | OA
H. Westermann, A. Reitz, R. Mahnken, M. Schaper, and O. Grydin, “Microstructure transformations in a press hardening steel during tailored thermo‐mechanical processing,” steel research international, 2022, doi: 10.1002/srin.202100346.
LibreCat | DOI | Download (ext.)
 
[123]
2022 | Journal Article | LibreCat-ID: 29196 | OA
M. Hein et al., “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications,” Metals, vol. 12, no. 1, Art. no. 122, 2022, doi: 10.3390/met12010122.
LibreCat | Files available | DOI | Download (ext.)
 
[122]
2022 | Journal Article | LibreCat-ID: 29811
A. Reitz, O. Grydin, and M. Schaper, “Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22MnB5,” Materials Science and Engineering: A, vol. 838, Art. no. 142780, 2022, doi: 10.1016/j.msea.2022.142780.
LibreCat | DOI | Download (ext.)
 
[121]
2022 | Journal Article | LibreCat-ID: 33723
J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials, vol. 13, no. 4, Art. no. 185, 2022, doi: 10.3390/jfb13040185.
LibreCat | DOI
 
[120]
2022 | Journal Article | LibreCat-ID: 34652
P. Vieth, M.-A. Garthe, D. Voswinkel, M. Schaper, and G. Grundmeier, “Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075-T6 alloy by aminophosphonic acid adsorption,” Surface and Coatings Technology, vol. 447, Art. no. 128835, 2022, doi: 10.1016/j.surfcoat.2022.128835.
LibreCat | DOI
 
[119]
2022 | Journal Article | LibreCat-ID: 31076
W. Tillmann et al., “Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications,” Materials Letters, Art. no. 132384, 2022, doi: 10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[118]
2022 | Journal Article | LibreCat-ID: 31075
Z. Teng et al., “Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel,” Advanced Engineering Materials, 2022, doi: 10.1002/adem.202200022.
LibreCat | DOI
 
[117]
2022 | Journal Article | LibreCat-ID: 33498
J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate,” Advanced Engineering Materials, Art. no. 2201008, 2022, doi: https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[116]
2022 | Journal Article | LibreCat-ID: 41497
S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study,” Crystals, vol. 12, no. 9, Art. no. 1217, 2022, doi: 10.3390/cryst12091217.
LibreCat | DOI
 
[115]
2022 | Journal Article | LibreCat-ID: 41494
J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials, vol. 13, no. 4, Art. no. 185, 2022, doi: 10.3390/jfb13040185.
LibreCat | DOI
 
[114]
2022 | Journal Article | LibreCat-ID: 41499
O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio,” Materials, vol. 15, no. 12, Art. no. 4072, 2022, doi: 10.3390/ma15124072.
LibreCat | DOI
 
[113]
2022 | Journal Article | LibreCat-ID: 41496
M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,” International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi: 10.1016/j.ijfatigue.2022.107235.
LibreCat | DOI
 
[112]
2022 | Journal Article | LibreCat-ID: 32332
J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies,” Journal of Materials Research and Technology, vol. 19, pp. 2369–2387, 2022, doi: 10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[111]
2022 | Journal Article | LibreCat-ID: 41498
J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies,” Journal of Materials Research and Technology, vol. 19, pp. 2369–2387, 2022, doi: 10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 41495
S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications,” Materials Science and Engineering: A, vol. 854, Art. no. 143887, 2022, doi: 10.1016/j.msea.2022.143887.
LibreCat | DOI
 
[109]
2022 | Journal Article | LibreCat-ID: 41500
M. Hein et al., “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion,” Materials, vol. 15, no. 11, Art. no. 3774, 2022, doi: 10.3390/ma15113774.
LibreCat | DOI
 
[108]
2022 | Journal Article | LibreCat-ID: 41503
S. Pramanik, F. Tasche, K.-P. Hoyer, and M. Schaper, “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study,” Magnetism, vol. 2, no. 2, pp. 88–104, 2022, doi: 10.3390/magnetism2020007.
LibreCat | DOI
 
[107]
2022 | Journal Article | LibreCat-ID: 41501
W. Tillmann et al., “Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications,” Materials Letters, vol. 321, Art. no. 132384, 2022, doi: 10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[106]
2022 | Journal Article | LibreCat-ID: 41502
Z. Teng et al., “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel,” Advanced Engineering Materials, vol. 24, no. 9, Art. no. 2200022, 2022, doi: 10.1002/adem.202200022.
LibreCat | DOI
 
[105]
2022 | Journal Article | LibreCat-ID: 41493
J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate,” Advanced Engineering Materials, Art. no. 2201008, 2022, doi: 10.1002/adem.202201008.
LibreCat | DOI
 
[104]
2022 | Journal Article | LibreCat-ID: 34654
I. M. Kusoglu et al., “Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts,” Procedia CIRP, vol. 111, pp. 10–13, 2022, doi: 10.1016/j.procir.2022.08.046.
LibreCat | DOI
 
[103]
2022 | Journal Article | LibreCat-ID: 33340 | OA
M. Hein et al., “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion,” Materials, 2022.
LibreCat | Files available
 
[102]
2021 | Conference Paper | LibreCat-ID: 25047 | OA
B. Křivská et al., “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1178, doi: 10.1088/1757-899x/1178/1/012035.
LibreCat | DOI | Download (ext.)
 
[101]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat | Download (ext.)
 
[100]
2021 | Journal Article | LibreCat-ID: 26191
D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, Art. no. 012028, 2021, doi: 10.1088/1757-899x/1190/1/012028.
LibreCat | DOI
 
[99]
2021 | Conference Paper | LibreCat-ID: 29812
B. Křivská et al., “In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet,” presented at the APCOM 2021, Online, 2021, doi: 10.1063/5.0067491.
LibreCat | DOI
 
[98]
2021 | Journal Article | LibreCat-ID: 24535
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat | DOI
 
[97]
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[96]
2021 | Book Chapter | LibreCat-ID: 29086
W.-G. Drossel et al., “Hybridprofile für Trag- und Crashstrukturen,” in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
LibreCat | DOI
 
[95]
2021 | Journal Article | LibreCat-ID: 29089
H. Westermann, A. Reitz, R. Mahnken, O. Grydin, and M. Schaper, “Constitutive modeling of viscoplasticity including phase transformations for graded thermo‐mechanical processing,” PAMM, 2021, doi: 10.1002/pamm.202100041.
LibreCat | DOI
 
[94]
2021 | Journal Article | LibreCat-ID: 41508
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, vol. 831, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[93]
2021 | Journal Article | LibreCat-ID: 41511
M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,” Materialwissenschaft und Werkstofftechnik, vol. 52, no. 7, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.
LibreCat | DOI
 
[92]
2021 | Journal Article | LibreCat-ID: 41507
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,” Rapid Prototyping Journal, vol. 28, no. 5, pp. 833–840, 2021, doi: 10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[91]
2021 | Journal Article | LibreCat-ID: 41506
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Kessler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, vol. 14, no. 23, Art. no. 7190, 2021, doi: 10.3390/ma14237190.
LibreCat | DOI
 
[90]
2021 | Journal Article | LibreCat-ID: 24790
J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art. no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[89]
2021 | Journal Article | LibreCat-ID: 41516
W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and Coatings Technology, vol. 421, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[88]
2021 | Journal Article | LibreCat-ID: 41512
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[87]
2021 | Journal Article | LibreCat-ID: 41510
S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” International Journal of Fatigue, vol. 153, Art. no. 106498, 2021, doi: 10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[86]
2021 | Journal Article | LibreCat-ID: 41509
J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art. no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[85]
2021 | Journal Article | LibreCat-ID: 23898
A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,” Journal of Materials Processing Technology, Art. no. 117183, 2021, doi: 10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[84]
2021 | Journal Article | LibreCat-ID: 41517
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, vol. 30, no. 11, pp. 8048–8056, 2021, doi: 10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[83]
2021 | Journal Article | LibreCat-ID: 24243
W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and Coatings Technology, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[82]
2021 | Journal Article | LibreCat-ID: 29815 | OA
B. Křivská et al., “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet,” Materials, vol. 14, no. 24, Art. no. 7771, 2021, doi: 10.3390/ma14247771.
LibreCat | DOI | Download (ext.)
 
[81]
2021 | Journal Article | LibreCat-ID: 24086
M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,” Materialwissenschaft und Werkstofftechnik, vol. 52, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.
LibreCat | DOI
 
[80]
2021 | Journal Article | LibreCat-ID: 29813
M. Cieslar et al., “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 79–80, 2021, doi: 10.1017/s1431927621013398.
LibreCat | DOI
 
[79]
2021 | Journal Article | LibreCat-ID: 41514
J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, vol. 871, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[78]
2021 | Journal Article | LibreCat-ID: 29814
B. Křivská et al., “Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 91–92, 2021, doi: 10.1017/s1431927621013453.
LibreCat | DOI
 
[77]
2021 | Journal Article | LibreCat-ID: 41515
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, vol. 46, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[76]
2021 | Journal Article | LibreCat-ID: 27700
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[75]
2021 | Journal Article | LibreCat-ID: 24090
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, 2021, doi: 10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[74]
2021 | Journal Article | LibreCat-ID: 27509
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,” Rapid Prototyping Journal, 2021, doi: 10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[73]
2021 | Journal Article | LibreCat-ID: 24087
J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[72]
2021 | Journal Article | LibreCat-ID: 23913
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat | DOI
 
[71]
2021 | Journal Article | LibreCat-ID: 24565
D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,” Production Engineering, vol. 15, no. 2, pp. 263–270, 2021, doi: 10.1007/s11740-020-01006-2.
LibreCat | DOI
 
[70]
2021 | Journal Article | LibreCat-ID: 24566 | OA
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, and W. Bremser, “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte,” ChemElectroChem, pp. 2155–2168, 2021, doi: 10.1002/celc.202100216.
LibreCat | DOI | Download (ext.)
 
[69]
2021 | Journal Article | LibreCat-ID: 23897
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[68]
2021 | Journal Article | LibreCat-ID: 23911
S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” International Journal of Fatigue, Art. no. 106498, 2021, doi: 10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[67]
2021 | Journal Article | LibreCat-ID: 24088
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[66]
2021 | Journal Article | LibreCat-ID: 23803 | OA
A. Reitz, O. Grydin, and M. Schaper, “Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ,” Materials Data for Smart Forming Technologies, 2021.
LibreCat | Download (ext.)
 
[65]
2020 | Conference Paper | LibreCat-ID: 24567
B. Krivská et al., “Interdiffusion in aluminum-steel clad strip,” in Proc. 20th Conference of Czech and Slovak Physicists, Prague, 2020, pp. 153–154.
LibreCat
 
[64]
2020 | Book Chapter | LibreCat-ID: 23801
A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in The Minerals, Metals & Materials Series, Cham: Springer, 2020.
LibreCat | DOI | Download (ext.)
 
[63]
2020 | Book Chapter | LibreCat-ID: 24575
O. Grydin, M. Stolbchenko, and M. Schaper, “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2020, Cham, 2020, pp. 1039–1044.
LibreCat | DOI
 
[62]
2020 | Journal Article | LibreCat-ID: 41519
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, vol. 29, no. 6, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[61]
2020 | Journal Article | LibreCat-ID: 41518
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 11, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat | DOI
 
[60]
2020 | Journal Article | LibreCat-ID: 23797 | OA
A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5,” Metallurgical and Materials Transactions A, pp. 5628–5638, 2020, doi: 10.1007/s11661-020-05976-x.
LibreCat | DOI | Download (ext.)
 
[59]
2020 | Journal Article | LibreCat-ID: 24573 | OA
O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987.
LibreCat | DOI | Download (ext.)
 
[58]
2020 | Journal Article | LibreCat-ID: 24100
K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, p. 095701, 2020, doi: 10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[57]
2020 | Journal Article | LibreCat-ID: 24572
M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi: 10.1177/1099636218792539.
LibreCat | DOI
 
[56]
2020 | Journal Article | LibreCat-ID: 41520
H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, vol. 794, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[55]
2020 | Journal Article | LibreCat-ID: 41521
W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, vol. 394, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[54]
2020 | Journal Article | LibreCat-ID: 41522
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 4, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat | DOI
 
[53]
2020 | Journal Article | LibreCat-ID: 24571
M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, pp. 1599–1608, 2020, doi: 10.1080/15376494.2018.1520941.
LibreCat | DOI
 
[52]
2020 | Journal Article | LibreCat-ID: 24254
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat | DOI
 
[51]
2020 | Journal Article | LibreCat-ID: 24092
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[50]
2020 | Journal Article | LibreCat-ID: 24255
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[49]
2020 | Journal Article | LibreCat-ID: 24093
H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[48]
2020 | Journal Article | LibreCat-ID: 24094
W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[47]
2020 | Journal Article | LibreCat-ID: 24091
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat | DOI
 
[46]
2020 | Journal Article | LibreCat-ID: 23899
O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, and M. Schaper, “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads,” Advanced Engineering Materials, Art. no. 2000130, 2020, doi: 10.1002/adem.202000130.
LibreCat | DOI
 
[45]
2020 | Journal Article | LibreCat-ID: 23896
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat | DOI
 
[44]
2019 | Book Chapter | LibreCat-ID: 24097
K.-P. Hoyer and M. Schaper, “Alloy Design for Biomedical Applications in Additive Manufacturing,” in TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
LibreCat | DOI
 
[43]
2019 | Book Chapter | LibreCat-ID: 24098
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, and O. Keßler, “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry,” in TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
LibreCat | DOI
 
[42]
2019 | Book Chapter | LibreCat-ID: 41523
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, and O. Keßler, “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2019.
LibreCat | DOI
 
[41]
2019 | Journal Article | LibreCat-ID: 23907
O. Grydin et al., “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082,” Materials Science Forum, pp. 85–92, 2019, doi: 10.4028/www.scientific.net/msf.949.85.
LibreCat | DOI
 
[40]
2019 | Journal Article | LibreCat-ID: 41524
K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, no. 9, Art. no. 095701, 2019, doi: 10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[39]
2019 | Journal Article | LibreCat-ID: 23900
O. Grydin et al., “Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties,” Materials Science and Engineering: A, pp. 176–195, 2019, doi: 10.1016/j.msea.2019.02.025.
LibreCat | DOI
 
[38]
2019 | Journal Article | LibreCat-ID: 23901
O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, and M. Schaper, “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel,” Advanced Engineering Materials, Art. no. 1900134, 2019, doi: 10.1002/adem.201900134.
LibreCat | DOI
 
[37]
2018 | Conference Paper | LibreCat-ID: 24105
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[36]
2018 | Conference Paper | LibreCat-ID: 41526
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[35]
2018 | Journal Article | LibreCat-ID: 15957
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[34]
2018 | Conference Paper | LibreCat-ID: 16048
D. Ahlers et al., “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing,” 2018, doi: 10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[33]
2018 | Conference Paper | LibreCat-ID: 16050
A. A. Camberg et al., “LHYBS – Lightweight Design by Novel Hybrid Materials,” presented at the 8th NRW Nano Conference, Innovations in Materials and Applications, Dortmund, 2018.
LibreCat
 
[32]
2018 | Conference Paper | LibreCat-ID: 16055
C. Zinn, Z. Wang, T. Tröster, and M. Schaper, “Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM,” presented at the 3rd Int Conf on Hybrid Materials and Structures, Bremen, 2018.
LibreCat
 
[31]
2018 | Journal Article | LibreCat-ID: 24104
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[30]
2018 | Journal Article | LibreCat-ID: 41525
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, vol. 3, no. 4, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[29]
2018 | Journal Article | LibreCat-ID: 41528
K. Engelkemeier, C. Mücke, K.-P. Hoyer, and M. Schaper, “Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates,” Advanced Composites and Hybrid Materials, vol. 2, no. 1, pp. 189–199, 2018, doi: 10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[28]
2018 | Journal Article | LibreCat-ID: 41527
K. Engelkemeier, K.-P. Hoyer, and M. Schaper, “Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers,” Materials Letters, vol. 236, pp. 752–756, 2018, doi: 10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[27]
2018 | Journal Article | LibreCat-ID: 24107
K. Engelkemeier, C. Mücke, K.-P. Hoyer, and M. Schaper, “Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates,” Advanced Composites and Hybrid Materials, pp. 189–199, 2018, doi: 10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[26]
2018 | Journal Article | LibreCat-ID: 24106
K. Engelkemeier, K.-P. Hoyer, and M. Schaper, “Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers,” Materials Letters, pp. 752–756, 2018, doi: 10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 15958
C. Zinn et al., “Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids,” Composites Part B: Engineering, pp. 173–185, 2018, doi: 10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 23902
O. Grydin et al., “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082,” JOM, pp. 407–418, 2018, doi: 10.1007/s11837-018-3144-1.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 23903
B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, and M. Schaper, “Friction-spinning—Grain structure modification and the impact on stress/strain behaviour,” Journal of Materials Processing Technology, pp. 242–250, 2018, doi: 10.1016/j.jmatprotec.2018.06.015.
LibreCat | DOI
 
[22]
2017 | Book Chapter | LibreCat-ID: 24117
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, Wiesbaden: Springer Vieweg, 2017.
LibreCat | DOI
 
[21]
2017 | Conference Paper | LibreCat-ID: 24119
J.-P. Brüggemann et al., “Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, ,” in DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 2017, pp. 11–22.
LibreCat
 
[20]
2017 | Journal Article | LibreCat-ID: 23904
O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, and M. Schaper, “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling,” steel research international, 2017.
LibreCat | DOI
 
[19]
2017 | Journal Article | LibreCat-ID: 23909
B. Lossen, A. Andreiev, W. Homberg, and M. Schaper, “Friction-Spinning – Possibility of Grain Structure Adjustment,” Procedia Engineering, pp. 1749–1754, 2017.
LibreCat | DOI
 
[18]
2017 | Book Chapter | LibreCat-ID: 23910
A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press Hardening Processing,” in Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 41529
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, Wiesbaden: Springer Fachmedien Wiesbaden, 2017.
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 16066
D. Ahlers et al., “Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 24108
F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[14]
2017 | Journal Article | LibreCat-ID: 41530
F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, vol. 133, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 15961
K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2017, doi: 10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[12]
2016 | Journal Article | LibreCat-ID: 41532
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P. Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser melting,” Additive Manufacturing, vol. 13, pp. 93–102, 2016, doi: 10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 15963
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, vol. 2, pp. 272–298, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 16138
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” presented at the Faszination hybrider Leichtbau 2016, Wolfsburg, 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 16265
C. Zinn et al., “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” presented at the EuroHybrid, Kaiserslautern, 2016.
LibreCat
 
[8]
2016 | Journal Article | LibreCat-ID: 16143
K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2016, doi: 10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[7]
2016 | Journal Article | LibreCat-ID: 16141
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, Art. no. 272, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[6]
2016 | Journal Article | LibreCat-ID: 24110
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P. Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser melting,” Additive Manufacturing, pp. 93–102, 2016, doi: 10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[5]
2016 | Journal Article | LibreCat-ID: 23905
A. Andreiev, O. Grydin, and M. Schaper, “Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching,” steel research international, pp. 1733–1741, 2016, doi: 10.1002/srin.201600086.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 16262
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” presented at the Hybrid-Expo, Stuttgart, 2015.
LibreCat
 
[3]
2015 | Journal Article | LibreCat-ID: 41534
T. Niendorf et al., “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications,” Metallurgical and Materials Transactions A, vol. 46, no. 7, pp. 2829–2833, 2015, doi: 10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[2]
2015 | Journal Article | LibreCat-ID: 24112
T. Niendorf et al., “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications,” Metallurgical and Materials Transactions A, pp. 2829–2833, 2015, doi: 10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[1]
2015 | Journal Article | LibreCat-ID: 23906
A. Andreiev et al., “Testing of pipe sections,” Materials Testing, pp. 643–648, 2015, doi: 10.3139/120.110759.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

158 Publications

Mark all

[158]
2025 | Journal Article | LibreCat-ID: 58133
S. Pramanik, D. Mileaege, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Effect of Compression Rate and Pore Size Distribution on the Compression Behavior of Additively Manufactured Bio-inspired Fe3Si Microporous Material,” Journal of Materials Engineering and Performance, 2025, doi: 10.1007/s11665-024-10618-z.
LibreCat | DOI
 
[157]
2025 | Journal Article | LibreCat-ID: 58807
M. Neuser et al., “Mechanical properties and joinability of the near-eutectic aluminium casting alloy AlSi12,” The Journal of Materials: Design and Applications, Part L, 2025, doi: 10.1177/14644207251319922.
LibreCat | DOI
 
[156]
2025 | Book Chapter | LibreCat-ID: 58950
M. P. K. Braun, O. Grydin, K.-P. Hoyer, and M. Schaper, “Precipitation Hardening in the Magnesium–Zinc–Calcium Alloy System,” in The Minerals, Metals & Materials Series, Cham: Springer Nature Switzerland, 2025.
LibreCat | DOI
 
[155]
2025 | Conference Paper | LibreCat-ID: 59154
M. Neuser, K.-P. Hoyer, and M. Schaper, “Processing of the hypoeutectic AlSi9 alloy with twin-roll casting by using copper shells,” in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-26.
LibreCat | DOI
 
[154]
2025 | Conference Paper | LibreCat-ID: 59155
M. Lauth, K.-P. Hoyer, M. Schaper, and W. Gräfen, “Cost-effective repair solution for twin-roll-caster rollers,” in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-5.
LibreCat | DOI
 
[153]
2024 | Journal Article | LibreCat-ID: 52738
D. Milaege, N. Eschemann, K.-P. Hoyer, and M. Schaper, “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion,” Crystals, vol. 14, no. 2, Art. no. 117, 2024, doi: 10.3390/cryst14020117.
LibreCat | DOI
 
[152]
2024 | Journal Article | LibreCat-ID: 57540
S. Mallow et al., “Process chain of a twin-roll cast aluminium-copper-lithium alloy,” Production Engineering, 2024, doi: 10.1007/s11740-024-01322-x.
LibreCat | DOI
 
[151]
2023 | Journal Article | LibreCat-ID: 47536
T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster, “Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology,” International Journal of Material Forming, vol. 16, no. 6, Art. no. 59, 2023, doi: 10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[150]
2023 | Journal Article | LibreCat-ID: 49107
S. Pramanik, D. Milaege, M. Hein, K.-P. Hoyer, and M. Schaper, “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach,” Crystals, vol. 13, no. 11, Art. no. 1592, 2023, doi: 10.3390/cryst13111592.
LibreCat | DOI
 
[149]
2023 | Conference Paper | LibreCat-ID: 43031
T. Borgert, M. Neuser, E. Wiens, O. Grydin, W. Homberg, and M. Schaper, “Influence of thermo-mechanical joining process on the microstructure of a hypoeutectic aluminium cast alloy,” in Materials Research Proceedings, Nürnberg, 2023, vol. 25, pp. 187–194, doi: 10.21741/9781644902417-24.
LibreCat | DOI
 
[148]
2023 | Journal Article | LibreCat-ID: 52405
M. Neuser, M. Schaper, and O. Grydin, “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process,” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, Art. no. 132, 2023, doi: 10.3390/jmmp7040132.
LibreCat | DOI
 
[147]
2023 | Journal Article | LibreCat-ID: 47535
T. Borgert, M. Neuser, K.-P. Hoyer, W. Homberg, and M. Schaper, “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates,” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, Art. no. 169, 2023, doi: 10.3390/jmmp7050169.
LibreCat | DOI
 
[146]
2023 | Conference Paper | LibreCat-ID: 52406
O. Grydin, M. Neuser, and M. Schaper, “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy,” 2023, doi: 10.1007/978-3-031-41341-4_61.
LibreCat | DOI
 
[145]
2023 | Book Chapter | LibreCat-ID: 41959
O. Grydin et al., “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips,” in Light Metals 2023, S. Broek, Ed. Cham: Springer Nature Switzerland, 2023, pp. 1031–1037.
LibreCat | DOI | Download (ext.)
 
[144]
2023 | Journal Article | LibreCat-ID: 41492
S. Pramanik et al., “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy,” Powders, vol. 2, no. 1, pp. 59–74, 2023, doi: 10.3390/powders2010005.
LibreCat | DOI
 
[143]
2023 | Journal Article | LibreCat-ID: 43441
M. Šlapáková et al., “3D-structure of intermetallic interface layer in Al–steel clad material,” Vacuum, vol. 212, Art. no. 112043, 2023, doi: 10.1016/j.vacuum.2023.112043.
LibreCat | DOI
 
[142]
2023 | Book Chapter | LibreCat-ID: 45360
M. Haase et al., “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,” in Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
 
[141]
2023 | Journal Article | LibreCat-ID: 44078
A. Andreiev et al., “Powder bed fusion of soft-magnetic iron-based alloys with high silicon content,” Journal of Materials Processing Technology, vol. 317, Art. no. 117991, 2023, doi: 10.1016/j.jmatprotec.2023.117991.
LibreCat | DOI
 
[140]
2023 | Journal Article | LibreCat-ID: 46503
S. Pramanik, K.-P. Hoyer, and M. Schaper, “Experimental and finite element method investigation on the compression behaviour of FCCZ and BCC lattice structures of additively manufactured Fe-3Si samples,” Rapid Prototyping Journal, vol. 29, no. 6, pp. 1257–1269, 2023, doi: 10.1108/rpj-06-2022-0190.
LibreCat | DOI
 
[139]
2023 | Journal Article | LibreCat-ID: 46507
S. Pramanik, D. Milaege, M. Hein, A. Andreiev, M. Schaper, and K.-P. Hoyer, “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures,” Advanced Engineering Materials, vol. 25, no. 14, 2023, doi: 10.1002/adem.202201850.
LibreCat | DOI
 
[138]
2023 | Book Chapter | LibreCat-ID: 46870
D. Menge, D. Milaege, K.-P. Hoyer, H.-J. Schmid, and M. Schaper, “Case Study IV: Individualized Medical Technology using Additive Manufacturing,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, I. Horwath and S. Schweizer, Eds. Bielefeld, Germany: transcript Verlag, 2023.
LibreCat | DOI
 
[137]
2023 | Journal Article | LibreCat-ID: 47122
S. Pramanik, J. T. Krüger, M. Schaper, and K.-P. Hoyer, “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution,” Metallurgical and Materials Transactions A, 2023, doi: 10.1007/s11661-023-07186-7.
LibreCat | DOI
 
[136]
2022 | Conference Paper | LibreCat-ID: 36335 | OA
M. CIESLAR et al., “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4438.
LibreCat | DOI | Download (ext.)
 
[135]
2022 | Journal Article | LibreCat-ID: 36332 | OA
M. Neuser et al., “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials, vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[134]
2022 | Journal Article | LibreCat-ID: 29724
M. Neuser, M. Böhnke, O. Grydin, M. Bobbert, M. Schaper, and G. Meschut, “Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Art. no. 146442072210758, 2022, doi: 10.1177/14644207221075838.
LibreCat | DOI
 
[133]
2022 | Journal Article | LibreCat-ID: 29505
M. Neuser, O. Grydin, Y. Frolov, and M. Schaper, “Influence of solidification rates and heat treatment on the mechanical performance and joinability of the cast aluminium alloy AlSi10Mg,” Production Engineering, 2022, doi: 10.1007/s11740-022-01106-1.
LibreCat | DOI
 
[132]
2022 | Book Chapter | LibreCat-ID: 29771
O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper, “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022, Cham: Springer International Publishing, 2022.
LibreCat | DOI
 
[131]
2022 | Conference Paper | LibreCat-ID: 36339 | OA
L. BAJTOŠOVÁ et al., “Phase identification in twin-roll cast Al-Li alloys,” presented at the Metal 2022, Brno, 2022, doi: 10.37904/metal.2022.4437.
LibreCat | DOI | Download (ext.)
 
[130]
2022 | Journal Article | LibreCat-ID: 32188
O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio,” Materials, vol. 15, no. 12, Art. no. 4072, 2022, doi: 10.3390/ma15124072.
LibreCat | DOI
 
[129]
2022 | Journal Article | LibreCat-ID: 34097
D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,” Advanced Composite Materials, pp. 1–16, 2022, doi: 10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[128]
2022 | Journal Article | LibreCat-ID: 30519
S. Pramanik, F. Tasche, K.-P. Hoyer, and M. Schaper, “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study,” Magnetism, vol. 2, pp. 88–104, 2022, doi: 10.3390/magnetism2020007.
LibreCat | DOI
 
[127]
2022 | Journal Article | LibreCat-ID: 36327 | OA
A. Reitz, O. Grydin, and M. Schaper, “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel,” Metallurgical and Materials Transactions A, vol. 53, no. 8, pp. 3125–3142, 2022, doi: 10.1007/s11661-022-06732-z.
LibreCat | DOI | Download (ext.)
 
[126]
2022 | Journal Article | LibreCat-ID: 40154
J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials, vol. 13, no. 4, p. 185, 2022, doi: 10.3390/jfb13040185.
LibreCat | DOI
 
[125]
2022 | Journal Article | LibreCat-ID: 36328
M. Šlapáková et al., “The influence of surface on direction of diffusion in Al-Fe clad material,” Materials Characterization, vol. 190, Art. no. 112005, 2022, doi: 10.1016/j.matchar.2022.112005.
LibreCat | DOI | Download (ext.)
 
[124]
2022 | Journal Article | LibreCat-ID: 23794 | OA
H. Westermann, A. Reitz, R. Mahnken, M. Schaper, and O. Grydin, “Microstructure transformations in a press hardening steel during tailored thermo‐mechanical processing,” steel research international, 2022, doi: 10.1002/srin.202100346.
LibreCat | DOI | Download (ext.)
 
[123]
2022 | Journal Article | LibreCat-ID: 29196 | OA
M. Hein et al., “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications,” Metals, vol. 12, no. 1, Art. no. 122, 2022, doi: 10.3390/met12010122.
LibreCat | Files available | DOI | Download (ext.)
 
[122]
2022 | Journal Article | LibreCat-ID: 29811
A. Reitz, O. Grydin, and M. Schaper, “Influence of thermomechanical processing on the microstructural and mechanical properties of steel 22MnB5,” Materials Science and Engineering: A, vol. 838, Art. no. 142780, 2022, doi: 10.1016/j.msea.2022.142780.
LibreCat | DOI | Download (ext.)
 
[121]
2022 | Journal Article | LibreCat-ID: 33723
J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials, vol. 13, no. 4, Art. no. 185, 2022, doi: 10.3390/jfb13040185.
LibreCat | DOI
 
[120]
2022 | Journal Article | LibreCat-ID: 34652
P. Vieth, M.-A. Garthe, D. Voswinkel, M. Schaper, and G. Grundmeier, “Enhancement of the delamination resistance of adhesive film coated surface laser melted aluminum 7075-T6 alloy by aminophosphonic acid adsorption,” Surface and Coatings Technology, vol. 447, Art. no. 128835, 2022, doi: 10.1016/j.surfcoat.2022.128835.
LibreCat | DOI
 
[119]
2022 | Journal Article | LibreCat-ID: 31076
W. Tillmann et al., “Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications,” Materials Letters, Art. no. 132384, 2022, doi: 10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[118]
2022 | Journal Article | LibreCat-ID: 31075
Z. Teng et al., “Characterization and analysis of plastic instability in an ultrafine‐grained medium Mn TRIP steel,” Advanced Engineering Materials, 2022, doi: 10.1002/adem.202200022.
LibreCat | DOI
 
[117]
2022 | Journal Article | LibreCat-ID: 33498
J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate,” Advanced Engineering Materials, Art. no. 2201008, 2022, doi: https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[116]
2022 | Journal Article | LibreCat-ID: 41497
S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study,” Crystals, vol. 12, no. 9, Art. no. 1217, 2022, doi: 10.3390/cryst12091217.
LibreCat | DOI
 
[115]
2022 | Journal Article | LibreCat-ID: 41494
J. T. Krüger et al., “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability,” Journal of Functional Biomaterials, vol. 13, no. 4, Art. no. 185, 2022, doi: 10.3390/jfb13040185.
LibreCat | DOI
 
[114]
2022 | Journal Article | LibreCat-ID: 41499
O. Abdelaal, F. Hengsbach, M. Schaper, and K.-P. Hoyer, “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio,” Materials, vol. 15, no. 12, Art. no. 4072, 2022, doi: 10.3390/ma15124072.
LibreCat | DOI
 
[113]
2022 | Journal Article | LibreCat-ID: 41496
M. Hein et al., “On the influence of physical vapor deposited thin coatings on the low-cycle fatigue behavior of additively processed Ti-6Al-7Nb alloy,” International Journal of Fatigue, vol. 166, Art. no. 107235, 2022, doi: 10.1016/j.ijfatigue.2022.107235.
LibreCat | DOI
 
[112]
2022 | Journal Article | LibreCat-ID: 32332
J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies,” Journal of Materials Research and Technology, vol. 19, pp. 2369–2387, 2022, doi: 10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[111]
2022 | Journal Article | LibreCat-ID: 41498
J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser beam melting strategies,” Journal of Materials Research and Technology, vol. 19, pp. 2369–2387, 2022, doi: 10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 41495
S. Pramanik, D. Milaege, K.-P. Hoyer, and M. Schaper, “Additively manufactured novel Ti6Al7Nb circular honeycomb cellular solid for energy absorbing applications,” Materials Science and Engineering: A, vol. 854, Art. no. 143887, 2022, doi: 10.1016/j.msea.2022.143887.
LibreCat | DOI
 
[109]
2022 | Journal Article | LibreCat-ID: 41500
M. Hein et al., “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion,” Materials, vol. 15, no. 11, Art. no. 3774, 2022, doi: 10.3390/ma15113774.
LibreCat | DOI
 
[108]
2022 | Journal Article | LibreCat-ID: 41503
S. Pramanik, F. Tasche, K.-P. Hoyer, and M. Schaper, “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study,” Magnetism, vol. 2, no. 2, pp. 88–104, 2022, doi: 10.3390/magnetism2020007.
LibreCat | DOI
 
[107]
2022 | Journal Article | LibreCat-ID: 41501
W. Tillmann et al., “Tribo-functional PVD thin films deposited onto additively manufactured Ti6Al7Nb for biomedical applications,” Materials Letters, vol. 321, Art. no. 132384, 2022, doi: 10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[106]
2022 | Journal Article | LibreCat-ID: 41502
Z. Teng et al., “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel,” Advanced Engineering Materials, vol. 24, no. 9, Art. no. 2200022, 2022, doi: 10.1002/adem.202200022.
LibreCat | DOI
 
[105]
2022 | Journal Article | LibreCat-ID: 41493
J. T. Krüger, K.-P. Hoyer, A. Andreiev, M. Schaper, and C. Zinn, “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate,” Advanced Engineering Materials, Art. no. 2201008, 2022, doi: 10.1002/adem.202201008.
LibreCat | DOI
 
[104]
2022 | Journal Article | LibreCat-ID: 34654
I. M. Kusoglu et al., “Microstructure and corrosion properties of PBF-LB produced carbide nanoparticles additivated AlSi10Mg parts,” Procedia CIRP, vol. 111, pp. 10–13, 2022, doi: 10.1016/j.procir.2022.08.046.
LibreCat | DOI
 
[103]
2022 | Journal Article | LibreCat-ID: 33340 | OA
M. Hein et al., “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion,” Materials, 2022.
LibreCat | Files available
 
[102]
2021 | Conference Paper | LibreCat-ID: 25047 | OA
B. Křivská et al., “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip,” in IOP Conference Series: Materials Science and Engineering, 2021, vol. 1178, doi: 10.1088/1757-899x/1178/1/012035.
LibreCat | DOI | Download (ext.)
 
[101]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat | Download (ext.)
 
[100]
2021 | Journal Article | LibreCat-ID: 26191
D. Voswinkel et al., “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment,” IOP Conference Series: Materials Science and Engineering, Art. no. 012028, 2021, doi: 10.1088/1757-899x/1190/1/012028.
LibreCat | DOI
 
[99]
2021 | Conference Paper | LibreCat-ID: 29812
B. Křivská et al., “In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet,” presented at the APCOM 2021, Online, 2021, doi: 10.1063/5.0067491.
LibreCat | DOI
 
[98]
2021 | Journal Article | LibreCat-ID: 24535
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat | DOI
 
[97]
2021 | Journal Article | LibreCat-ID: 24537
M. Neuser et al., “Joining suitability of cast aluminium for self-piercing riveting,” IOP Conference Series: Materials Science and Engineering, Art. no. 012005, 2021, doi: 10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[96]
2021 | Book Chapter | LibreCat-ID: 29086
W.-G. Drossel et al., “Hybridprofile für Trag- und Crashstrukturen,” in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
LibreCat | DOI
 
[95]
2021 | Journal Article | LibreCat-ID: 29089
H. Westermann, A. Reitz, R. Mahnken, O. Grydin, and M. Schaper, “Constitutive modeling of viscoplasticity including phase transformations for graded thermo‐mechanical processing,” PAMM, 2021, doi: 10.1002/pamm.202100041.
LibreCat | DOI
 
[94]
2021 | Journal Article | LibreCat-ID: 41508
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, vol. 831, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[93]
2021 | Journal Article | LibreCat-ID: 41511
M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,” Materialwissenschaft und Werkstofftechnik, vol. 52, no. 7, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.
LibreCat | DOI
 
[92]
2021 | Journal Article | LibreCat-ID: 41507
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,” Rapid Prototyping Journal, vol. 28, no. 5, pp. 833–840, 2021, doi: 10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[91]
2021 | Journal Article | LibreCat-ID: 41506
S. Heiland, B. Milkereit, K.-P. Hoyer, E. Zhuravlev, O. Kessler, and M. Schaper, “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts,” Materials, vol. 14, no. 23, Art. no. 7190, 2021, doi: 10.3390/ma14237190.
LibreCat | DOI
 
[90]
2021 | Journal Article | LibreCat-ID: 24790
J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art. no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[89]
2021 | Journal Article | LibreCat-ID: 41516
W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and Coatings Technology, vol. 421, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[88]
2021 | Journal Article | LibreCat-ID: 41512
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, vol. 822, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[87]
2021 | Journal Article | LibreCat-ID: 41510
S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” International Journal of Fatigue, vol. 153, Art. no. 106498, 2021, doi: 10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[86]
2021 | Journal Article | LibreCat-ID: 41509
J. T. Krüger, K.-P. Hoyer, and M. Schaper, “Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants,” Materials Letters, vol. 306, Art. no. 130890, 2021, doi: 10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[85]
2021 | Journal Article | LibreCat-ID: 23898
A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,” Journal of Materials Processing Technology, Art. no. 117183, 2021, doi: 10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[84]
2021 | Journal Article | LibreCat-ID: 41517
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, vol. 30, no. 11, pp. 8048–8056, 2021, doi: 10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[83]
2021 | Journal Article | LibreCat-ID: 24243
W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and Coatings Technology, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[82]
2021 | Journal Article | LibreCat-ID: 29815 | OA
B. Křivská et al., “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet,” Materials, vol. 14, no. 24, Art. no. 7771, 2021, doi: 10.3390/ma14247771.
LibreCat | DOI | Download (ext.)
 
[81]
2021 | Journal Article | LibreCat-ID: 24086
M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,” Materialwissenschaft und Werkstofftechnik, vol. 52, pp. 703–716, 2021, doi: 10.1002/mawe.202000288.
LibreCat | DOI
 
[80]
2021 | Journal Article | LibreCat-ID: 29813
M. Cieslar et al., “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 79–80, 2021, doi: 10.1017/s1431927621013398.
LibreCat | DOI
 
[79]
2021 | Journal Article | LibreCat-ID: 41514
J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, vol. 871, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[78]
2021 | Journal Article | LibreCat-ID: 29814
B. Křivská et al., “Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 91–92, 2021, doi: 10.1017/s1431927621013453.
LibreCat | DOI
 
[77]
2021 | Journal Article | LibreCat-ID: 41515
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, vol. 46, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[76]
2021 | Journal Article | LibreCat-ID: 27700
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[75]
2021 | Journal Article | LibreCat-ID: 24090
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, 2021, doi: 10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[74]
2021 | Journal Article | LibreCat-ID: 27509
K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,” Rapid Prototyping Journal, 2021, doi: 10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[73]
2021 | Journal Article | LibreCat-ID: 24087
J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[72]
2021 | Journal Article | LibreCat-ID: 23913
M. Neuser, O. Grydin, A. Andreiev, and M. Schaper, “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy,” Metals, Art. no. 1304, 2021, doi: 10.3390/met11081304.
LibreCat | DOI
 
[71]
2021 | Journal Article | LibreCat-ID: 24565
D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,” Production Engineering, vol. 15, no. 2, pp. 263–270, 2021, doi: 10.1007/s11740-020-01006-2.
LibreCat | DOI
 
[70]
2021 | Journal Article | LibreCat-ID: 24566 | OA
K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, and W. Bremser, “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte,” ChemElectroChem, pp. 2155–2168, 2021, doi: 10.1002/celc.202100216.
LibreCat | DOI | Download (ext.)
 
[69]
2021 | Journal Article | LibreCat-ID: 23897
A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[68]
2021 | Journal Article | LibreCat-ID: 23911
S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” International Journal of Fatigue, Art. no. 106498, 2021, doi: 10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[67]
2021 | Journal Article | LibreCat-ID: 24088
S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[66]
2021 | Journal Article | LibreCat-ID: 23803 | OA
A. Reitz, O. Grydin, and M. Schaper, “Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ,” Materials Data for Smart Forming Technologies, 2021.
LibreCat | Download (ext.)
 
[65]
2020 | Conference Paper | LibreCat-ID: 24567
B. Krivská et al., “Interdiffusion in aluminum-steel clad strip,” in Proc. 20th Conference of Czech and Slovak Physicists, Prague, 2020, pp. 153–154.
LibreCat
 
[64]
2020 | Book Chapter | LibreCat-ID: 23801
A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts,” in The Minerals, Metals & Materials Series, Cham: Springer, 2020.
LibreCat | DOI | Download (ext.)
 
[63]
2020 | Book Chapter | LibreCat-ID: 24575
O. Grydin, M. Stolbchenko, and M. Schaper, “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2020, Cham, 2020, pp. 1039–1044.
LibreCat | DOI
 
[62]
2020 | Journal Article | LibreCat-ID: 41519
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, vol. 29, no. 6, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[61]
2020 | Journal Article | LibreCat-ID: 41518
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 11, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat | DOI
 
[60]
2020 | Journal Article | LibreCat-ID: 23797 | OA
A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5,” Metallurgical and Materials Transactions A, pp. 5628–5638, 2020, doi: 10.1007/s11661-020-05976-x.
LibreCat | DOI | Download (ext.)
 
[59]
2020 | Journal Article | LibreCat-ID: 24573 | OA
O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987.
LibreCat | DOI | Download (ext.)
 
[58]
2020 | Journal Article | LibreCat-ID: 24100
K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, p. 095701, 2020, doi: 10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[57]
2020 | Journal Article | LibreCat-ID: 24572
M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020, doi: 10.1177/1099636218792539.
LibreCat | DOI
 
[56]
2020 | Journal Article | LibreCat-ID: 41520
H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, vol. 794, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[55]
2020 | Journal Article | LibreCat-ID: 41521
W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, vol. 394, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[54]
2020 | Journal Article | LibreCat-ID: 41522
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, vol. 51, no. 4, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat | DOI
 
[53]
2020 | Journal Article | LibreCat-ID: 24571
M. Stolbchenko, Y. Frolov, H. Makeieva, O. Grydin, M. A. Tershakovec, and M. Schaper, “The mechanical properties of rolled wire-reinforced aluminum composites at different strain values,” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, pp. 1599–1608, 2020, doi: 10.1080/15376494.2018.1520941.
LibreCat | DOI
 
[52]
2020 | Journal Article | LibreCat-ID: 24254
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat | DOI
 
[51]
2020 | Journal Article | LibreCat-ID: 24092
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[50]
2020 | Journal Article | LibreCat-ID: 24255
W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM,” Journal of Thermal Spray Technology, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[49]
2020 | Journal Article | LibreCat-ID: 24093
H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations,” Materials Science and Engineering: A, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[48]
2020 | Journal Article | LibreCat-ID: 24094
W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,” Surface and Coatings Technology, Art. no. 125748, 2020, doi: 10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[47]
2020 | Journal Article | LibreCat-ID: 24091
W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.
LibreCat | DOI
 
[46]
2020 | Journal Article | LibreCat-ID: 23899
O. Grydin, M. Matzelt, A. Andreiev, Y. Frolov, and M. Schaper, “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads,” Advanced Engineering Materials, Art. no. 2000130, 2020, doi: 10.1002/adem.202000130.
LibreCat | DOI
 
[45]
2020 | Journal Article | LibreCat-ID: 23896
A. Andreiev, K.-P. Hoyer, O. Grydin, Y. Frolov, and M. Schaper, “Degradable silver‐based alloys,” Materialwissenschaft und Werkstofftechnik, pp. 517–530, 2020, doi: 10.1002/mawe.201900191.
LibreCat | DOI
 
[44]
2019 | Book Chapter | LibreCat-ID: 24097
K.-P. Hoyer and M. Schaper, “Alloy Design for Biomedical Applications in Additive Manufacturing,” in TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
LibreCat | DOI
 
[43]
2019 | Book Chapter | LibreCat-ID: 24098
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, and O. Keßler, “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry,” in TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, Cham, 2019.
LibreCat | DOI
 
[42]
2019 | Book Chapter | LibreCat-ID: 41523
L. Tasche, K.-P. Hoyer, E. Zhuravlev, G. Grundmeier, M. Schaper, and O. Keßler, “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry,” in The Minerals, Metals & Materials Series, Cham: Springer International Publishing, 2019.
LibreCat | DOI
 
[41]
2019 | Journal Article | LibreCat-ID: 23907
O. Grydin et al., “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082,” Materials Science Forum, pp. 85–92, 2019, doi: 10.4028/www.scientific.net/msf.949.85.
LibreCat | DOI
 
[40]
2019 | Journal Article | LibreCat-ID: 41524
K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide nanowall hollow microspheres and their structural properties,” Nanotechnology, vol. 31, no. 9, Art. no. 095701, 2019, doi: 10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[39]
2019 | Journal Article | LibreCat-ID: 23900
O. Grydin et al., “Short austenitization treatment with subsequent press hardening: Correlation between process parameters, microstructure and mechanical properties,” Materials Science and Engineering: A, pp. 176–195, 2019, doi: 10.1016/j.msea.2019.02.025.
LibreCat | DOI
 
[38]
2019 | Journal Article | LibreCat-ID: 23901
O. Grydin, A. Andreiev, M. Zogaj, Y. Frolov, and M. Schaper, “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel,” Advanced Engineering Materials, Art. no. 1900134, 2019, doi: 10.1002/adem.201900134.
LibreCat | DOI
 
[37]
2018 | Conference Paper | LibreCat-ID: 24105
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[36]
2018 | Conference Paper | LibreCat-ID: 41526
S. Urbanek et al., “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine,” 2018, doi: 10.1109/itec.2018.8450250.
LibreCat | DOI
 
[35]
2018 | Journal Article | LibreCat-ID: 15957
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[34]
2018 | Conference Paper | LibreCat-ID: 16048
D. Ahlers et al., “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing,” 2018, doi: 10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[33]
2018 | Conference Paper | LibreCat-ID: 16050
A. A. Camberg et al., “LHYBS – Lightweight Design by Novel Hybrid Materials,” presented at the 8th NRW Nano Conference, Innovations in Materials and Applications, Dortmund, 2018.
LibreCat
 
[32]
2018 | Conference Paper | LibreCat-ID: 16055
C. Zinn, Z. Wang, T. Tröster, and M. Schaper, “Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM,” presented at the 3rd Int Conf on Hybrid Materials and Structures, Bremen, 2018.
LibreCat
 
[31]
2018 | Journal Article | LibreCat-ID: 24104
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[30]
2018 | Journal Article | LibreCat-ID: 41525
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, vol. 3, no. 4, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[29]
2018 | Journal Article | LibreCat-ID: 41528
K. Engelkemeier, C. Mücke, K.-P. Hoyer, and M. Schaper, “Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates,” Advanced Composites and Hybrid Materials, vol. 2, no. 1, pp. 189–199, 2018, doi: 10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[28]
2018 | Journal Article | LibreCat-ID: 41527
K. Engelkemeier, K.-P. Hoyer, and M. Schaper, “Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers,” Materials Letters, vol. 236, pp. 752–756, 2018, doi: 10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[27]
2018 | Journal Article | LibreCat-ID: 24107
K. Engelkemeier, C. Mücke, K.-P. Hoyer, and M. Schaper, “Anodizing of electrolytically galvanized steel surfaces for improved interface properties in fiber metal laminates,” Advanced Composites and Hybrid Materials, pp. 189–199, 2018, doi: 10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[26]
2018 | Journal Article | LibreCat-ID: 24106
K. Engelkemeier, K.-P. Hoyer, and M. Schaper, “Influence of sp3/sp2-carbon ratio of vertically standing carbon nanostructures produced by pulsed laser-treatment on PAN-based carbon fibers,” Materials Letters, pp. 752–756, 2018, doi: 10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 15958
C. Zinn et al., “Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids,” Composites Part B: Engineering, pp. 173–185, 2018, doi: 10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 23902
O. Grydin et al., “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082,” JOM, pp. 407–418, 2018, doi: 10.1007/s11837-018-3144-1.
LibreCat | DOI
 
[23]
2018 | Journal Article | LibreCat-ID: 23903
B. Lossen, A. Andreiev, M. Stolbchenko, W. Homberg, and M. Schaper, “Friction-spinning—Grain structure modification and the impact on stress/strain behaviour,” Journal of Materials Processing Technology, pp. 242–250, 2018, doi: 10.1016/j.jmatprotec.2018.06.015.
LibreCat | DOI
 
[22]
2017 | Book Chapter | LibreCat-ID: 24117
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, Wiesbaden: Springer Vieweg, 2017.
LibreCat | DOI
 
[21]
2017 | Conference Paper | LibreCat-ID: 24119
J.-P. Brüggemann et al., “Optimierung der Werkstoffeigenschaften von selektiv lasergeschmolzenem Alumi-nium 7075, ,” in DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 2017, pp. 11–22.
LibreCat
 
[20]
2017 | Journal Article | LibreCat-ID: 23904
O. Grydin, A. Andreiev, A. Briukhanov, Z. Briukhanova, and M. Schaper, “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling,” steel research international, 2017.
LibreCat | DOI
 
[19]
2017 | Journal Article | LibreCat-ID: 23909
B. Lossen, A. Andreiev, W. Homberg, and M. Schaper, “Friction-Spinning – Possibility of Grain Structure Adjustment,” Procedia Engineering, pp. 1749–1754, 2017.
LibreCat | DOI
 
[18]
2017 | Book Chapter | LibreCat-ID: 23910
A. Andreiev, O. Grydin, and M. Schaper, “A Rapid Heating Method for Press Hardening Processing,” in Proceedings of the 3rd Pan American Materials Congress, Cham, 2017.
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 41529
A. Taube, W. Reschetnik, L. Pauli, K.-P. Hoyer, G. Kullmer, and M. Schaper, “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen,” in Additive Fertigung von Bauteilen und Strukturen, Wiesbaden: Springer Fachmedien Wiesbaden, 2017.
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 16066
D. Ahlers et al., “Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 24108
F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[14]
2017 | Journal Article | LibreCat-ID: 41530
F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, vol. 133, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 15961
K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2017, doi: 10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[12]
2016 | Journal Article | LibreCat-ID: 41532
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P. Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser melting,” Additive Manufacturing, vol. 13, pp. 93–102, 2016, doi: 10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 15963
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, vol. 2, pp. 272–298, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 16138
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” presented at the Faszination hybrider Leichtbau 2016, Wolfsburg, 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 16265
C. Zinn et al., “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” presented at the EuroHybrid, Kaiserslautern, 2016.
LibreCat
 
[8]
2016 | Journal Article | LibreCat-ID: 16143
K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2016, doi: 10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[7]
2016 | Journal Article | LibreCat-ID: 16141
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, Art. no. 272, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[6]
2016 | Journal Article | LibreCat-ID: 24110
W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P. Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser melting,” Additive Manufacturing, pp. 93–102, 2016, doi: 10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[5]
2016 | Journal Article | LibreCat-ID: 23905
A. Andreiev, O. Grydin, and M. Schaper, “Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching,” steel research international, pp. 1733–1741, 2016, doi: 10.1002/srin.201600086.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 16262
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” presented at the Hybrid-Expo, Stuttgart, 2015.
LibreCat
 
[3]
2015 | Journal Article | LibreCat-ID: 41534
T. Niendorf et al., “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications,” Metallurgical and Materials Transactions A, vol. 46, no. 7, pp. 2829–2833, 2015, doi: 10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[2]
2015 | Journal Article | LibreCat-ID: 24112
T. Niendorf et al., “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications,” Metallurgical and Materials Transactions A, pp. 2829–2833, 2015, doi: 10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[1]
2015 | Journal Article | LibreCat-ID: 23906
A. Andreiev et al., “Testing of pipe sections,” Materials Testing, pp. 643–648, 2015, doi: 10.3139/120.110759.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed