Mirko Schaper

schaper@lwk.uni-paderborn.de
ID
43720

152 Publications

Mark all

[152]
2024 | Journal Article | LibreCat-ID: 52738
Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” Crystals, vol. 14, no. 2, 117, MDPI AG, 2024, doi:10.3390/cryst14020117.
LibreCat | DOI
 
[151]
2023 | Book Chapter | LibreCat-ID: 41959
Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips.” Light Metals 2023, edited by Stephan Broek, Springer Nature Switzerland, 2023, pp. 1031–37, doi:10.1007/978-3-031-22532-1_137.
LibreCat | DOI | Download (ext.)
 
[150]
2023 | Journal Article | LibreCat-ID: 41492
Pramanik, Sudipta, et al. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders, vol. 2, no. 1, MDPI AG, 2023, pp. 59–74, doi:10.3390/powders2010005.
LibreCat | DOI
 
[149]
2023 | Journal Article | LibreCat-ID: 43441
Šlapáková, Michaela, et al. “3D-Structure of Intermetallic Interface Layer in Al–Steel Clad Material.” Vacuum, vol. 212, 112043, Elsevier BV, 2023, doi:10.1016/j.vacuum.2023.112043.
LibreCat | DOI
 
[148]
2023 | Book Chapter | LibreCat-ID: 45360
Haase, Michael, et al. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast et al., Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
 
[147]
2023 | Journal Article | LibreCat-ID: 44078
Andreiev, Anatolii, et al. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” Journal of Materials Processing Technology, vol. 317, 117991, Elsevier BV, 2023, doi:10.1016/j.jmatprotec.2023.117991.
LibreCat | DOI
 
[146]
2023 | Journal Article | LibreCat-ID: 46503
Pramanik, Sudipta, et al. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping Journal, vol. 29, no. 6, Emerald, 2023, pp. 1257–69, doi:10.1108/rpj-06-2022-0190.
LibreCat | DOI
 
[145]
2023 | Journal Article | LibreCat-ID: 46507
Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” Advanced Engineering Materials, vol. 25, no. 14, Wiley, 2023, doi:10.1002/adem.202201850.
LibreCat | DOI
 
[144]
2023 | Book Chapter | LibreCat-ID: 46870
Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:10.14361/9783839463772-007.
LibreCat | DOI
 
[143]
2023 | Journal Article | LibreCat-ID: 47122
Pramanik, Sudipta, et al. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, Springer Science and Business Media LLC, 2023, doi:10.1007/s11661-023-07186-7.
LibreCat | DOI
 
[142]
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business Media LLC, 2023, doi:10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[141]
2023 | Journal Article | LibreCat-ID: 49107
Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:10.3390/cryst13111592.
LibreCat | DOI
 
[140]
2023 | Conference Paper | LibreCat-ID: 43031
Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” Materials Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.
LibreCat | DOI
 
[139]
2023 | Journal Article | LibreCat-ID: 52405
Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.
LibreCat | DOI
 
[138]
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.
LibreCat | DOI
 
[137]
2023 | Conference Paper | LibreCat-ID: 52406
Grydin, Olexandr, et al. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.”     Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_61.
LibreCat | DOI
 
[136]
2022 | Conference Paper | LibreCat-ID: 36335 | OA
CIESLAR, Miroslav, et al. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.” METAL 2022 Conference Proeedings, TANGER Ltd., 2022, doi:10.37904/metal.2022.4438.
LibreCat | DOI | Download (ext.)
 
[135]
2022 | Conference Paper | LibreCat-ID: 36339 | OA
BAJTOŠOVÁ, Lucia, et al. “Phase Identification in Twin-Roll Cast Al-Li Alloys.” METAL 2022 Conference Proeedings, TANGER Ltd., 2022, doi:10.37904/metal.2022.4437.
LibreCat | DOI | Download (ext.)
 
[134]
2022 | Journal Article | LibreCat-ID: 32188
Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
LibreCat | DOI
 
[133]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[132]
2022 | Journal Article | LibreCat-ID: 30519
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, MDPI, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
LibreCat | DOI
 
[131]
2022 | Journal Article | LibreCat-ID: 36327 | OA
Reitz, Alexander, et al. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.” Metallurgical and Materials Transactions A, vol. 53, no. 8, Springer Science and Business Media LLC, 2022, pp. 3125–42, doi:10.1007/s11661-022-06732-z.
LibreCat | DOI | Download (ext.)
 
[130]
2022 | Journal Article | LibreCat-ID: 40154
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, MDPI AG, 2022, p. 185, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[129]
2022 | Journal Article | LibreCat-ID: 36328
Šlapáková, Michaela, et al. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.” Materials Characterization, vol. 190, 112005, Elsevier BV, 2022, doi:10.1016/j.matchar.2022.112005.
LibreCat | DOI | Download (ext.)
 
[128]
2022 | Journal Article | LibreCat-ID: 23794 | OA
Westermann, Hendrik, et al. “Microstructure Transformations in a Press Hardening Steel during Tailored Thermo‐mechanical Processing.” Steel Research International, 2022, doi:10.1002/srin.202100346.
LibreCat | DOI | Download (ext.)
 
[127]
2022 | Journal Article | LibreCat-ID: 29196 | OA
Hein, Maxwell, et al. “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications.” Metals, vol. 12, no. 1, 122, MDPI AG, 2022, doi:10.3390/met12010122.
LibreCat | Files available | DOI | Download (ext.)
 
[126]
2022 | Journal Article | LibreCat-ID: 29811
Reitz, Alexander, et al. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22MnB5.” Materials Science and Engineering: A, vol. 838, 142780, Elsevier BV, 2022, doi:10.1016/j.msea.2022.142780.
LibreCat | DOI | Download (ext.)
 
[125]
2022 | Journal Article | LibreCat-ID: 33723
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[124]
2022 | Journal Article | LibreCat-ID: 34652
Vieth, P., et al. “Enhancement of the Delamination Resistance of Adhesive Film Coated Surface Laser Melted Aluminum 7075-T6 Alloy by Aminophosphonic Acid Adsorption.” Surface and Coatings Technology, vol. 447, 128835, Elsevier BV, 2022, doi:10.1016/j.surfcoat.2022.128835.
LibreCat | DOI
 
[123]
2022 | Journal Article | LibreCat-ID: 31076
Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[122]
2022 | Journal Article | LibreCat-ID: 31075
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” Advanced Engineering Materials, Wiley, 2022, doi:10.1002/adem.202200022.
LibreCat | DOI
 
[121]
2022 | Journal Article | LibreCat-ID: 33498
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, 2022, doi:https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[120]
2022 | Journal Article | LibreCat-ID: 41497
Pramanik, Sudipta, et al. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.” Crystals, vol. 12, no. 9, 1217, MDPI AG, 2022, doi:10.3390/cryst12091217.
LibreCat | DOI
 
[119]
2022 | Journal Article | LibreCat-ID: 41494
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[118]
2022 | Journal Article | LibreCat-ID: 41499
Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
LibreCat | DOI
 
[117]
2022 | Journal Article | LibreCat-ID: 41496
Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.” International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.
LibreCat | DOI
 
[116]
2022 | Journal Article | LibreCat-ID: 32332
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[115]
2022 | Journal Article | LibreCat-ID: 41498
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[114]
2022 | Journal Article | LibreCat-ID: 41495
Pramanik, Sudipta, et al. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.” Materials Science and Engineering: A, vol. 854, 143887, Elsevier BV, 2022, doi:10.1016/j.msea.2022.143887.
LibreCat | DOI
 
[113]
2022 | Journal Article | LibreCat-ID: 41500
Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, vol. 15, no. 11, 3774, MDPI AG, 2022, doi:10.3390/ma15113774.
LibreCat | DOI
 
[112]
2022 | Journal Article | LibreCat-ID: 41503
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, no. 2, MDPI AG, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
LibreCat | DOI
 
[111]
2022 | Journal Article | LibreCat-ID: 41501
Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, vol. 321, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 41502
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced Engineering Materials, vol. 24, no. 9, 2200022, Wiley, 2022, doi:10.1002/adem.202200022.
LibreCat | DOI
 
[109]
2022 | Journal Article | LibreCat-ID: 41493
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, Wiley, 2022, doi:10.1002/adem.202201008.
LibreCat | DOI
 
[108]
2022 | Journal Article | LibreCat-ID: 34654
Kusoglu, Ihsan Murat, et al. “Microstructure and Corrosion Properties of PBF-LB Produced Carbide Nanoparticles Additivated AlSi10Mg Parts.” Procedia CIRP, vol. 111, Elsevier BV, 2022, pp. 10–13, doi:10.1016/j.procir.2022.08.046.
LibreCat | DOI
 
[107]
2022 | Journal Article | LibreCat-ID: 33340 | OA
Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, 2022.
LibreCat | Files available
 
[106]
2022 | Journal Article | LibreCat-ID: 36332 | OA
Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[105]
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.
LibreCat | DOI
 
[104]
2022 | Journal Article | LibreCat-ID: 29505
Neuser, Moritz, et al. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01106-1.
LibreCat | DOI
 
[103]
2022 | Book Chapter | LibreCat-ID: 29771
Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.” Light Metals 2022, Springer International Publishing, 2022, doi:10.1007/978-3-030-92529-1_96.
LibreCat | DOI
 
[102]
2021 | Conference Paper | LibreCat-ID: 25047 | OA
Křivská, B., et al. “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip.” IOP Conference Series: Materials Science and Engineering, vol. 1178, 012035, 2021, doi:10.1088/1757-899x/1178/1/012035.
LibreCat | DOI | Download (ext.)
 
[101]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus, Marcel, et al. “Forming Simulation of Tailored Press Hardened Parts.” 13th European LS-DYNA Conference 2021, 2021.
LibreCat | Download (ext.)
 
[100]
2021 | Journal Article | LibreCat-ID: 26191
Voswinkel, Dietrich, et al. “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment.” IOP Conference Series: Materials Science and Engineering, 012028, 2021, doi:10.1088/1757-899x/1190/1/012028.
LibreCat | DOI
 
[99]
2021 | Conference Paper | LibreCat-ID: 29812
Křivská, Barbora, et al. “In-Situ TEM Observation of Intermetallic Phase Growth in Al-Steel Clad Sheet.” APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2021), AIP Publishing, 2021, doi:10.1063/5.0067491.
LibreCat | DOI
 
[98]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[97]
2021 | Journal Article | LibreCat-ID: 29089
Westermann, Hendrik, et al. “Constitutive Modeling of Viscoplasticity Including Phase Transformations for Graded Thermo‐mechanical Processing.” PAMM, 2021, doi:10.1002/pamm.202100041.
LibreCat | DOI
 
[96]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[95]
2021 | Journal Article | LibreCat-ID: 41511
Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, no. 7, Wiley, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat | DOI
 
[94]
2021 | Journal Article | LibreCat-ID: 41507
Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, vol. 28, no. 5, Emerald, 2021, pp. 833–40, doi:10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[93]
2021 | Journal Article | LibreCat-ID: 41506
Heiland, Steffen, et al. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials, vol. 14, no. 23, 7190, MDPI AG, 2021, doi:10.3390/ma14237190.
LibreCat | DOI
 
[92]
2021 | Journal Article | LibreCat-ID: 24790
Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[91]
2021 | Journal Article | LibreCat-ID: 41516
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, vol. 421, 127384, Elsevier BV, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[90]
2021 | Journal Article | LibreCat-ID: 41512
Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, vol. 822, 141662, Elsevier BV, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[89]
2021 | Journal Article | LibreCat-ID: 41510
Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, vol. 153, 106498, Elsevier BV, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[88]
2021 | Journal Article | LibreCat-ID: 41509
Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, Elsevier BV, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[87]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[86]
2021 | Journal Article | LibreCat-ID: 41517
Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, vol. 30, no. 11, Springer Science and Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[85]
2021 | Journal Article | LibreCat-ID: 24243
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, 127384, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[84]
2021 | Journal Article | LibreCat-ID: 29815 | OA
Křivská, Barbora, et al. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials, vol. 14, no. 24, 7771, MDPI AG, 2021, doi:10.3390/ma14247771.
LibreCat | DOI | Download (ext.)
 
[83]
2021 | Journal Article | LibreCat-ID: 24086
Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat | DOI
 
[82]
2021 | Journal Article | LibreCat-ID: 29813
Cieslar, Miroslav, et al. “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-Situ SEM and STEM.” Microscopy and Microanalysis, vol. 27, no. S2, Cambridge University Press (CUP), 2021, pp. 79–80, doi:10.1017/s1431927621013398.
LibreCat | DOI
 
[81]
2021 | Journal Article | LibreCat-ID: 41514
Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, vol. 871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[80]
2021 | Journal Article | LibreCat-ID: 29814
Křivská, Barbora, et al. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.” Microscopy and Microanalysis, vol. 27, no. S2, Cambridge University Press (CUP), 2021, pp. 91–92, doi:10.1017/s1431927621013453.
LibreCat | DOI
 
[79]
2021 | Journal Article | LibreCat-ID: 41515
Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[78]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[77]
2021 | Journal Article | LibreCat-ID: 24090
Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, 2021, doi:10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[76]
2021 | Journal Article | LibreCat-ID: 27509
Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, 2021, doi:10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[75]
2021 | Journal Article | LibreCat-ID: 24087
Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, 159544, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[74]
2021 | Journal Article | LibreCat-ID: 23913
Neuser, Moritz, et al. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 1304, 2021, doi:10.3390/met11081304.
LibreCat | DOI
 
[73]
2021 | Journal Article | LibreCat-ID: 24565
Voswinkel, Dietrich, et al. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.” Production Engineering, vol. 15, no. 2, 2021, pp. 263–70, doi:10.1007/s11740-020-01006-2.
LibreCat | DOI
 
[72]
2021 | Journal Article | LibreCat-ID: 24566 | OA
Engelkemeier, Katja, et al. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” ChemElectroChem, Wiley, 2021, pp. 2155–68, doi:10.1002/celc.202100216.
LibreCat | DOI | Download (ext.)
 
[71]
2021 | Journal Article | LibreCat-ID: 23897
Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, 141662, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[70]
2021 | Journal Article | LibreCat-ID: 23911
Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[69]
2021 | Journal Article | LibreCat-ID: 24088
Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, 102087, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[68]
2021 | Journal Article | LibreCat-ID: 23803 | OA
Reitz, Alexander, et al. “Characterization of Phase Transformations during Graded Thermo- Mechanical Treatment of Steel 22MnB5 by Means of Optical Methods .” Materials Data for Smart Forming Technologies, 2021.
LibreCat | Download (ext.)
 
[67]
2021 | Journal Article | LibreCat-ID: 24535
Neuser, Moritz, et al. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 1304, 2021, doi:10.3390/met11081304.
LibreCat | DOI
 
[66]
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[65]
2020 | Conference Paper | LibreCat-ID: 24567
Krivská, Barbora, et al. “Interdiffusion in Aluminum-Steel Clad Strip.” Proc. 20th Conference of Czech and Slovak Physicists, 2020, pp. 153–54.
LibreCat
 
[64]
2020 | Book Chapter | LibreCat-ID: 23801
Reitz, Alexander, et al. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” The Minerals, Metals & Materials Series, Springer, 2020, doi:10.1007/978-3-030-36628-5_7.
LibreCat | DOI | Download (ext.)
 
[63]
2020 | Book Chapter | LibreCat-ID: 24575
Grydin, Olexandr, et al. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.” Light Metals 2020, 2020, pp. 1039–44, doi:10.1007/978-3-030-36408-3_141.
LibreCat | DOI
 
[62]
2020 | Journal Article | LibreCat-ID: 41519
Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, vol. 29, no. 6, Springer Science and Business Media LLC, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[61]
2020 | Journal Article | LibreCat-ID: 41518
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 11, Wiley, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[60]
2020 | Journal Article | LibreCat-ID: 23797 | OA
Reitz, Alexander, et al. “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” Metallurgical and Materials Transactions A, Springer, 2020, pp. 5628–38, doi:10.1007/s11661-020-05976-x.
LibreCat | DOI | Download (ext.)
 
[59]
2020 | Journal Article | LibreCat-ID: 24573 | OA
Grydin, Olexandr, et al. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals, vol. 10, no. 8, 987, 2020, doi:10.3390/met10080987.
LibreCat | DOI | Download (ext.)
 
[58]
2020 | Journal Article | LibreCat-ID: 24100
Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, 2020, p. 095701, doi:10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[57]
2020 | Journal Article | LibreCat-ID: 24572
Stolbchenko, Mykhailo, et al. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials, vol. 22, no. 6, 2020, pp. 2009–29, doi:10.1177/1099636218792539.
LibreCat | DOI
 
[56]
2020 | Journal Article | LibreCat-ID: 41520
Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[55]
2020 | Journal Article | LibreCat-ID: 41521
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, vol. 394, 125748, Elsevier BV, 2020, doi:10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[54]
2020 | Journal Article | LibreCat-ID: 41522
Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat | DOI
 
[53]
2020 | Journal Article | LibreCat-ID: 24571
Stolbchenko, Mykhailo, et al. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, 2020, pp. 1599–608, doi:10.1080/15376494.2018.1520941.
LibreCat | DOI
 
[52]
2020 | Journal Article | LibreCat-ID: 24254
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[51]
2020 | Journal Article | LibreCat-ID: 24092
Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[50]
2020 | Journal Article | LibreCat-ID: 24255
Tillmann, W., et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[49]
2020 | Journal Article | LibreCat-ID: 24093
Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 139597, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[48]
2020 | Journal Article | LibreCat-ID: 24094
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 125748, 2020, doi:10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[47]
2020 | Journal Article | LibreCat-ID: 24091
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[46]
2020 | Journal Article | LibreCat-ID: 23899
Grydin, Olexandr, et al. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” Advanced Engineering Materials, 2000130, 2020, doi:10.1002/adem.202000130.
LibreCat | DOI
 
[45]
2020 | Journal Article | LibreCat-ID: 23896
Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat | DOI
 
[44]
2019 | Book Chapter | LibreCat-ID: 24097
Hoyer, Kay-Peter, and Mirko Schaper. “Alloy Design for Biomedical Applications in Additive Manufacturing.” TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 2019, doi:10.1007/978-3-030-05861-6_44.
LibreCat | DOI
 
[43]
2019 | Book Chapter | LibreCat-ID: 24098
Tasche, Lennart, et al. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 2019, doi:10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[42]
2019 | Book Chapter | LibreCat-ID: 41523
Tasche, Lennart, et al. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” The Minerals, Metals & Materials Series, Springer International Publishing, 2019, doi:10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[41]
2019 | Journal Article | LibreCat-ID: 23907
Grydin, Olexandr, et al. “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082.” Materials Science Forum, 2019, pp. 85–92, doi:10.4028/www.scientific.net/msf.949.85.
LibreCat | DOI
 
[40]
2019 | Journal Article | LibreCat-ID: 41524
Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, no. 9, 095701, IOP Publishing, 2019, doi:10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[39]
2019 | Journal Article | LibreCat-ID: 23900
Grydin, Olexandr, et al. “Short Austenitization Treatment with Subsequent Press Hardening: Correlation between Process Parameters, Microstructure and Mechanical Properties.” Materials Science and Engineering: A, 2019, pp. 176–95, doi:10.1016/j.msea.2019.02.025.
LibreCat | DOI
 
[38]
2019 | Journal Article | LibreCat-ID: 23901
Grydin, Olexandr, et al. “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel.” Advanced Engineering Materials, 1900134, 2019, doi:10.1002/adem.201900134.
LibreCat | DOI
 
[37]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[36]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[35]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, et al. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” Contributed Papers from MS&T17, 2018, doi:10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[34]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, et al. LHYBS – Lightweight Design by Novel Hybrid Materials. 2018.
LibreCat
 
[33]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., et al. Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM. 2018.
LibreCat
 
[32]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[31]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, vol. 3, no. 4, Springer Science and Business Media LLC, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[30]
2018 | Journal Article | LibreCat-ID: 41528
Engelkemeier, Katja, et al. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, vol. 2, no. 1, Springer Science and Business Media LLC, 2018, pp. 189–99, doi:10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[29]
2018 | Journal Article | LibreCat-ID: 41527
Engelkemeier, Katja, et al. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, vol. 236, Elsevier BV, 2018, pp. 752–56, doi:10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[28]
2018 | Journal Article | LibreCat-ID: 24107
Engelkemeier, Katja, et al. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, 2018, pp. 189–99, doi:10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[27]
2018 | Journal Article | LibreCat-ID: 24106
Engelkemeier, Katja, et al. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, 2018, pp. 752–56, doi:10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[26]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, et al. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, pp. 173–85, doi:10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 23902
Grydin, Olexandr, et al. “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082.” JOM, 2018, pp. 407–18, doi:10.1007/s11837-018-3144-1.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 23903
Lossen, Benjamin, et al. “Friction-Spinning—Grain Structure Modification and the Impact on Stress/Strain Behaviour.” Journal of Materials Processing Technology, 2018, pp. 242–50, doi:10.1016/j.jmatprotec.2018.06.015.
LibreCat | DOI
 
[23]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[22]
2017 | Book Chapter | LibreCat-ID: 24117
Taube, Alexander, et al. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, 2017, doi:10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[21]
2017 | Conference Paper | LibreCat-ID: 24119
Brüggemann, Jan-Peter, et al. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 11–22.
LibreCat
 
[20]
2017 | Journal Article | LibreCat-ID: 23904
Grydin, Olexandr, et al. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” Steel Research International, 1600397, 2017, doi:10.1002/srin.201600397.
LibreCat | DOI
 
[19]
2017 | Journal Article | LibreCat-ID: 23909
Lossen, Benjamin, et al. “Friction-Spinning – Possibility of Grain Structure Adjustment.” Procedia Engineering, 2017, pp. 1749–54, doi:10.1016/j.proeng.2017.10.933.
LibreCat | DOI
 
[18]
2017 | Book Chapter | LibreCat-ID: 23910
Andreiev, Anatolii, et al. “A Rapid Heating Method for Press Hardening Processing.” Proceedings of the 3rd Pan American Materials Congress, 2017, doi:10.1007/978-3-319-52132-9_72.
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 41529
Taube, Alexander, et al. “Numerische Und Mechanische Untersuchung Additiv Gefertigter TiAl6V4 Gitterstrukturen.” Additive Fertigung von Bauteilen Und Strukturen, Springer Fachmedien Wiesbaden, 2017, doi:10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, et al. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[14]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, vol. 133, Elsevier BV, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2017, doi:10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[12]
2016 | Journal Article | LibreCat-ID: 41532
Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, vol. 13, Elsevier BV, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, vol. 2, 2016, pp. 272–98, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. 2016.
LibreCat
 
[8]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2016, doi:10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[7]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 272, 2016, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[6]
2016 | Journal Article | LibreCat-ID: 24110
Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[5]
2016 | Journal Article | LibreCat-ID: 23905
Andreiev, Anatolii, et al. “Evolution of Microstructure and Properties of Steel 22MnB5 Due to Short Austenitization with Subsequent Quenching.” Steel Research International, 2016, pp. 1733–41, doi:10.1002/srin.201600086.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. 2015.
LibreCat
 
[3]
2015 | Journal Article | LibreCat-ID: 41534
Niendorf, Thomas, et al. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, vol. 46, no. 7, Springer Science and Business Media LLC, 2015, pp. 2829–33, doi:10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[2]
2015 | Journal Article | LibreCat-ID: 24112
Niendorf, Thomas, et al. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, 2015, pp. 2829–33, doi:10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[1]
2015 | Journal Article | LibreCat-ID: 23906
Andreiev, Anatolii, et al. “Testing of Pipe Sections.” Materials Testing, 2015, pp. 643–48, doi:10.3139/120.110759.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed

152 Publications

Mark all

[152]
2024 | Journal Article | LibreCat-ID: 52738
Milaege, Dennis, et al. “Anisotropic Mechanical and Microstructural Properties of a Ti-6Al-7Nb Alloy for Biomedical Applications Manufactured via Laser Powder Bed Fusion.” Crystals, vol. 14, no. 2, 117, MDPI AG, 2024, doi:10.3390/cryst14020117.
LibreCat | DOI
 
[151]
2023 | Book Chapter | LibreCat-ID: 41959
Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Twin-Roll Casting of Aluminum–Lithium Strips.” Light Metals 2023, edited by Stephan Broek, Springer Nature Switzerland, 2023, pp. 1031–37, doi:10.1007/978-3-031-22532-1_137.
LibreCat | DOI | Download (ext.)
 
[150]
2023 | Journal Article | LibreCat-ID: 41492
Pramanik, Sudipta, et al. “Powder Production via Atomisation and Subsequent Laser Powder Bed Fusion Processing of Fe+316L Steel Hybrid Alloy.” Powders, vol. 2, no. 1, MDPI AG, 2023, pp. 59–74, doi:10.3390/powders2010005.
LibreCat | DOI
 
[149]
2023 | Journal Article | LibreCat-ID: 43441
Šlapáková, Michaela, et al. “3D-Structure of Intermetallic Interface Layer in Al–Steel Clad Material.” Vacuum, vol. 212, 112043, Elsevier BV, 2023, doi:10.1016/j.vacuum.2023.112043.
LibreCat | DOI
 
[148]
2023 | Book Chapter | LibreCat-ID: 45360
Haase, Michael, et al. “Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.” Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May 2023, edited by Michael Kynast et al., Carl Hanser Verlag GmbH & Co. KG, 2023.
LibreCat
 
[147]
2023 | Journal Article | LibreCat-ID: 44078
Andreiev, Anatolii, et al. “Powder Bed Fusion of Soft-Magnetic Iron-Based Alloys with High Silicon Content.” Journal of Materials Processing Technology, vol. 317, 117991, Elsevier BV, 2023, doi:10.1016/j.jmatprotec.2023.117991.
LibreCat | DOI
 
[146]
2023 | Journal Article | LibreCat-ID: 46503
Pramanik, Sudipta, et al. “Experimental and Finite Element Method Investigation on the Compression Behaviour of FCCZ and BCC Lattice Structures of Additively Manufactured Fe-3Si Samples.” Rapid Prototyping Journal, vol. 29, no. 6, Emerald, 2023, pp. 1257–69, doi:10.1108/rpj-06-2022-0190.
LibreCat | DOI
 
[145]
2023 | Journal Article | LibreCat-ID: 46507
Pramanik, Sudipta, et al. “An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.” Advanced Engineering Materials, vol. 25, no. 14, Wiley, 2023, doi:10.1002/adem.202201850.
LibreCat | DOI
 
[144]
2023 | Book Chapter | LibreCat-ID: 46870
Menge, Dennis, et al. “Case Study IV: Individualized Medical Technology Using Additive Manufacturing.” Climate Protection, Resource Efficiency, and Sustainable Engineering, edited by Illona Horwath and Swetlana Schweizer, transcript Verlag, 2023, doi:10.14361/9783839463772-007.
LibreCat | DOI
 
[143]
2023 | Journal Article | LibreCat-ID: 47122
Pramanik, Sudipta, et al. “Quasi-In Situ Localized Corrosion of an Additively Manufactured FeCo Alloy in 5 Wt Pct NaCl Solution.” Metallurgical and Materials Transactions A, Springer Science and Business Media LLC, 2023, doi:10.1007/s11661-023-07186-7.
LibreCat | DOI
 
[142]
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business Media LLC, 2023, doi:10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[141]
2023 | Journal Article | LibreCat-ID: 49107
Pramanik, Sudipta, et al. “Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach.” Crystals, vol. 13, no. 11, 1592, MDPI AG, 2023, doi:10.3390/cryst13111592.
LibreCat | DOI
 
[140]
2023 | Conference Paper | LibreCat-ID: 43031
Borgert, Thomas, et al. “Influence of Thermo-Mechanical Joining Process on the Microstructure of a Hypoeutectic Aluminium Cast Alloy.” Materials Research Proceedings, vol. 25, Materials Research Forum LLC, 2023, pp. 187–94, doi:10.21741/9781644902417-24.
LibreCat | DOI
 
[139]
2023 | Journal Article | LibreCat-ID: 52405
Neuser, Moritz, et al. “Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process.” Journal of Manufacturing and Materials Processing, vol. 7, no. 4, 132, MDPI AG, 2023, doi:10.3390/jmmp7040132.
LibreCat | DOI
 
[138]
2023 | Journal Article | LibreCat-ID: 47535
Borgert, Thomas, et al. “Thermomechanical Joining of Hypoeutectic Aluminium Cast Plates.” Journal of Manufacturing and Materials Processing, vol. 7, no. 5, 169, MDPI AG, 2023, doi:10.3390/jmmp7050169.
LibreCat | DOI
 
[137]
2023 | Conference Paper | LibreCat-ID: 52406
Grydin, Olexandr, et al. “Influence of Shell Material on the Microstructure and Mechanical Properties of Twin-Roll Cast Al-Si-Mg Alloy.”     Conference: ICTP 2023: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of PlasticityAt: Cannes (France), Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_61.
LibreCat | DOI
 
[136]
2022 | Conference Paper | LibreCat-ID: 36335 | OA
CIESLAR, Miroslav, et al. “HOMOGENIZATION OF TWIN-ROLL CAST Al-Li-BASED ALLOY STUDIED BY IN-SITU ELECTRON MICROSCOPY.” METAL 2022 Conference Proeedings, TANGER Ltd., 2022, doi:10.37904/metal.2022.4438.
LibreCat | DOI | Download (ext.)
 
[135]
2022 | Conference Paper | LibreCat-ID: 36339 | OA
BAJTOŠOVÁ, Lucia, et al. “Phase Identification in Twin-Roll Cast Al-Li Alloys.” METAL 2022 Conference Proeedings, TANGER Ltd., 2022, doi:10.37904/metal.2022.4437.
LibreCat | DOI | Download (ext.)
 
[134]
2022 | Journal Article | LibreCat-ID: 32188
Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
LibreCat | DOI
 
[133]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[132]
2022 | Journal Article | LibreCat-ID: 30519
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, MDPI, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
LibreCat | DOI
 
[131]
2022 | Journal Article | LibreCat-ID: 36327 | OA
Reitz, Alexander, et al. “Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-Mechanical Processing of a Press Hardening Steel.” Metallurgical and Materials Transactions A, vol. 53, no. 8, Springer Science and Business Media LLC, 2022, pp. 3125–42, doi:10.1007/s11661-022-06732-z.
LibreCat | DOI | Download (ext.)
 
[130]
2022 | Journal Article | LibreCat-ID: 40154
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, MDPI AG, 2022, p. 185, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[129]
2022 | Journal Article | LibreCat-ID: 36328
Šlapáková, Michaela, et al. “The Influence of Surface on Direction of Diffusion in Al-Fe Clad Material.” Materials Characterization, vol. 190, 112005, Elsevier BV, 2022, doi:10.1016/j.matchar.2022.112005.
LibreCat | DOI | Download (ext.)
 
[128]
2022 | Journal Article | LibreCat-ID: 23794 | OA
Westermann, Hendrik, et al. “Microstructure Transformations in a Press Hardening Steel during Tailored Thermo‐mechanical Processing.” Steel Research International, 2022, doi:10.1002/srin.202100346.
LibreCat | DOI | Download (ext.)
 
[127]
2022 | Journal Article | LibreCat-ID: 29196 | OA
Hein, Maxwell, et al. “Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications.” Metals, vol. 12, no. 1, 122, MDPI AG, 2022, doi:10.3390/met12010122.
LibreCat | Files available | DOI | Download (ext.)
 
[126]
2022 | Journal Article | LibreCat-ID: 29811
Reitz, Alexander, et al. “Influence of Thermomechanical Processing on the Microstructural and Mechanical Properties of Steel 22MnB5.” Materials Science and Engineering: A, vol. 838, 142780, Elsevier BV, 2022, doi:10.1016/j.msea.2022.142780.
LibreCat | DOI | Download (ext.)
 
[125]
2022 | Journal Article | LibreCat-ID: 33723
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[124]
2022 | Journal Article | LibreCat-ID: 34652
Vieth, P., et al. “Enhancement of the Delamination Resistance of Adhesive Film Coated Surface Laser Melted Aluminum 7075-T6 Alloy by Aminophosphonic Acid Adsorption.” Surface and Coatings Technology, vol. 447, 128835, Elsevier BV, 2022, doi:10.1016/j.surfcoat.2022.128835.
LibreCat | DOI
 
[123]
2022 | Journal Article | LibreCat-ID: 31076
Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[122]
2022 | Journal Article | LibreCat-ID: 31075
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐grained Medium Mn TRIP Steel.” Advanced Engineering Materials, Wiley, 2022, doi:10.1002/adem.202200022.
LibreCat | DOI
 
[121]
2022 | Journal Article | LibreCat-ID: 33498
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, 2022, doi:https://doi.org/10.1002/adem.202201008.
LibreCat | DOI
 
[120]
2022 | Journal Article | LibreCat-ID: 41497
Pramanik, Sudipta, et al. “Additively Manufactured Nested and Non-Nested Cellular Solids for Effective Stress Distribution and Thermal Insulation Applications: An Experimental and Finite Element Analysis Study.” Crystals, vol. 12, no. 9, 1217, MDPI AG, 2022, doi:10.3390/cryst12091217.
LibreCat | DOI
 
[119]
2022 | Journal Article | LibreCat-ID: 41494
Krüger, Jan Tobias, et al. “FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability.” Journal of Functional Biomaterials, vol. 13, no. 4, 185, MDPI AG, 2022, doi:10.3390/jfb13040185.
LibreCat | DOI
 
[118]
2022 | Journal Article | LibreCat-ID: 41499
Abdelaal, Osama, et al. “LPBF Manufactured Functionally Graded Lattice Structures Obtained by Graded Density and Hybrid Poisson’s Ratio.” Materials, vol. 15, no. 12, 4072, MDPI AG, 2022, doi:10.3390/ma15124072.
LibreCat | DOI
 
[117]
2022 | Journal Article | LibreCat-ID: 41496
Hein, Maxwell, et al. “On the Influence of Physical Vapor Deposited Thin Coatings on the Low-Cycle Fatigue Behavior of Additively Processed Ti-6Al-7Nb Alloy.” International Journal of Fatigue, vol. 166, 107235, Elsevier BV, 2022, doi:10.1016/j.ijfatigue.2022.107235.
LibreCat | DOI
 
[116]
2022 | Journal Article | LibreCat-ID: 32332
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[115]
2022 | Journal Article | LibreCat-ID: 41498
Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022, pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
LibreCat | DOI
 
[114]
2022 | Journal Article | LibreCat-ID: 41495
Pramanik, Sudipta, et al. “Additively Manufactured Novel Ti6Al7Nb Circular Honeycomb Cellular Solid for Energy Absorbing Applications.” Materials Science and Engineering: A, vol. 854, 143887, Elsevier BV, 2022, doi:10.1016/j.msea.2022.143887.
LibreCat | DOI
 
[113]
2022 | Journal Article | LibreCat-ID: 41500
Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, vol. 15, no. 11, 3774, MDPI AG, 2022, doi:10.3390/ma15113774.
LibreCat | DOI
 
[112]
2022 | Journal Article | LibreCat-ID: 41503
Pramanik, Sudipta, et al. “Orientation-Dependent Indentation Behaviour of Additively Manufactured FeCo Sample: A Quasi In-Situ Study.” Magnetism, vol. 2, no. 2, MDPI AG, 2022, pp. 88–104, doi:10.3390/magnetism2020007.
LibreCat | DOI
 
[111]
2022 | Journal Article | LibreCat-ID: 41501
Tillmann, Wolfgang, et al. “Tribo-Functional PVD Thin Films Deposited onto Additively Manufactured Ti6Al7Nb for Biomedical Applications.” Materials Letters, vol. 321, 132384, Elsevier BV, 2022, doi:10.1016/j.matlet.2022.132384.
LibreCat | DOI
 
[110]
2022 | Journal Article | LibreCat-ID: 41502
Teng, Zhenjie, et al. “Characterization and Analysis of Plastic Instability in an Ultrafine‐Grained Medium Mn TRIP Steel.” Advanced Engineering Materials, vol. 24, no. 9, 2200022, Wiley, 2022, doi:10.1002/adem.202200022.
LibreCat | DOI
 
[109]
2022 | Journal Article | LibreCat-ID: 41493
Krüger, Jan Tobias, et al. “Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate.” Advanced Engineering Materials, 2201008, Wiley, 2022, doi:10.1002/adem.202201008.
LibreCat | DOI
 
[108]
2022 | Journal Article | LibreCat-ID: 34654
Kusoglu, Ihsan Murat, et al. “Microstructure and Corrosion Properties of PBF-LB Produced Carbide Nanoparticles Additivated AlSi10Mg Parts.” Procedia CIRP, vol. 111, Elsevier BV, 2022, pp. 10–13, doi:10.1016/j.procir.2022.08.046.
LibreCat | DOI
 
[107]
2022 | Journal Article | LibreCat-ID: 33340 | OA
Hein, Maxwell, et al. “Heat Treatments of Metastable β Titanium Alloy Ti-24Nb-4Zr-8Sn Processed by Laser Powder Bed Fusion.” Materials, 2022.
LibreCat | Files available
 
[106]
2022 | Journal Article | LibreCat-ID: 36332 | OA
Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
LibreCat | DOI | Download (ext.)
 
[105]
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.
LibreCat | DOI
 
[104]
2022 | Journal Article | LibreCat-ID: 29505
Neuser, Moritz, et al. “Influence of Solidification Rates and Heat Treatment on the Mechanical Performance and Joinability of the Cast Aluminium Alloy AlSi10Mg.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01106-1.
LibreCat | DOI
 
[103]
2022 | Book Chapter | LibreCat-ID: 29771
Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum Strips.” Light Metals 2022, Springer International Publishing, 2022, doi:10.1007/978-3-030-92529-1_96.
LibreCat | DOI
 
[102]
2021 | Conference Paper | LibreCat-ID: 25047 | OA
Křivská, B., et al. “Resistivity and Formation of Intermetallic Layer in Aluminum-Steel Clad Strip.” IOP Conference Series: Materials Science and Engineering, vol. 1178, 012035, 2021, doi:10.1088/1757-899x/1178/1/012035.
LibreCat | DOI | Download (ext.)
 
[101]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus, Marcel, et al. “Forming Simulation of Tailored Press Hardened Parts.” 13th European LS-DYNA Conference 2021, 2021.
LibreCat | Download (ext.)
 
[100]
2021 | Journal Article | LibreCat-ID: 26191
Voswinkel, Dietrich, et al. “Improving the Accuracy of Deep Drawn Fiber-Metal Laminate Parts by Preliminary Surface Treatment.” IOP Conference Series: Materials Science and Engineering, 012028, 2021, doi:10.1088/1757-899x/1190/1/012028.
LibreCat | DOI
 
[99]
2021 | Conference Paper | LibreCat-ID: 29812
Křivská, Barbora, et al. “In-Situ TEM Observation of Intermetallic Phase Growth in Al-Steel Clad Sheet.” APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2021), AIP Publishing, 2021, doi:10.1063/5.0067491.
LibreCat | DOI
 
[98]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[97]
2021 | Journal Article | LibreCat-ID: 29089
Westermann, Hendrik, et al. “Constitutive Modeling of Viscoplasticity Including Phase Transformations for Graded Thermo‐mechanical Processing.” PAMM, 2021, doi:10.1002/pamm.202100041.
LibreCat | DOI
 
[96]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[95]
2021 | Journal Article | LibreCat-ID: 41511
Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, no. 7, Wiley, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat | DOI
 
[94]
2021 | Journal Article | LibreCat-ID: 41507
Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, vol. 28, no. 5, Emerald, 2021, pp. 833–40, doi:10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[93]
2021 | Journal Article | LibreCat-ID: 41506
Heiland, Steffen, et al. “Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts.” Materials, vol. 14, no. 23, 7190, MDPI AG, 2021, doi:10.3390/ma14237190.
LibreCat | DOI
 
[92]
2021 | Journal Article | LibreCat-ID: 24790
Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[91]
2021 | Journal Article | LibreCat-ID: 41516
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, vol. 421, 127384, Elsevier BV, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[90]
2021 | Journal Article | LibreCat-ID: 41512
Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, vol. 822, 141662, Elsevier BV, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[89]
2021 | Journal Article | LibreCat-ID: 41510
Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, vol. 153, 106498, Elsevier BV, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[88]
2021 | Journal Article | LibreCat-ID: 41509
Krüger, Jan Tobias, et al. “Bioresorbable AgCe and AgCeLa Alloys for Adapted Fe-Based Implants.” Materials Letters, vol. 306, 130890, Elsevier BV, 2021, doi:10.1016/j.matlet.2021.130890.
LibreCat | DOI
 
[87]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[86]
2021 | Journal Article | LibreCat-ID: 41517
Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, vol. 30, no. 11, Springer Science and Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[85]
2021 | Journal Article | LibreCat-ID: 24243
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, 127384, 2021, doi:10.1016/j.surfcoat.2021.127384.
LibreCat | DOI
 
[84]
2021 | Journal Article | LibreCat-ID: 29815 | OA
Křivská, Barbora, et al. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials, vol. 14, no. 24, 7771, MDPI AG, 2021, doi:10.3390/ma14247771.
LibreCat | DOI | Download (ext.)
 
[83]
2021 | Journal Article | LibreCat-ID: 24086
Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, 2021, pp. 703–16, doi:10.1002/mawe.202000288.
LibreCat | DOI
 
[82]
2021 | Journal Article | LibreCat-ID: 29813
Cieslar, Miroslav, et al. “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-Situ SEM and STEM.” Microscopy and Microanalysis, vol. 27, no. S2, Cambridge University Press (CUP), 2021, pp. 79–80, doi:10.1017/s1431927621013398.
LibreCat | DOI
 
[81]
2021 | Journal Article | LibreCat-ID: 41514
Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, vol. 871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[80]
2021 | Journal Article | LibreCat-ID: 29814
Křivská, Barbora, et al. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.” Microscopy and Microanalysis, vol. 27, no. S2, Cambridge University Press (CUP), 2021, pp. 91–92, doi:10.1017/s1431927621013453.
LibreCat | DOI
 
[79]
2021 | Journal Article | LibreCat-ID: 41515
Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[78]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[77]
2021 | Journal Article | LibreCat-ID: 24090
Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, 2021, doi:10.1007/s11665-021-06065-9.
LibreCat | DOI
 
[76]
2021 | Journal Article | LibreCat-ID: 27509
Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, 2021, doi:10.1108/rpj-01-2021-0017.
LibreCat | DOI
 
[75]
2021 | Journal Article | LibreCat-ID: 24087
Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, 159544, 2021, doi:10.1016/j.jallcom.2021.159544.
LibreCat | DOI
 
[74]
2021 | Journal Article | LibreCat-ID: 23913
Neuser, Moritz, et al. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 1304, 2021, doi:10.3390/met11081304.
LibreCat | DOI
 
[73]
2021 | Journal Article | LibreCat-ID: 24565
Voswinkel, Dietrich, et al. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.” Production Engineering, vol. 15, no. 2, 2021, pp. 263–70, doi:10.1007/s11740-020-01006-2.
LibreCat | DOI
 
[72]
2021 | Journal Article | LibreCat-ID: 24566 | OA
Engelkemeier, Katja, et al. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” ChemElectroChem, Wiley, 2021, pp. 2155–68, doi:10.1002/celc.202100216.
LibreCat | DOI | Download (ext.)
 
[71]
2021 | Journal Article | LibreCat-ID: 23897
Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, 141662, 2021, doi:10.1016/j.msea.2021.141662.
LibreCat | DOI
 
[70]
2021 | Journal Article | LibreCat-ID: 23911
Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498.
LibreCat | DOI
 
[69]
2021 | Journal Article | LibreCat-ID: 24088
Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, 102087, 2021, doi:10.1016/j.addma.2021.102087.
LibreCat | DOI
 
[68]
2021 | Journal Article | LibreCat-ID: 23803 | OA
Reitz, Alexander, et al. “Characterization of Phase Transformations during Graded Thermo- Mechanical Treatment of Steel 22MnB5 by Means of Optical Methods .” Materials Data for Smart Forming Technologies, 2021.
LibreCat | Download (ext.)
 
[67]
2021 | Journal Article | LibreCat-ID: 24535
Neuser, Moritz, et al. “Effect of Solidification Rates at Sand Casting on the Mechanical Joinability of a Cast Aluminium Alloy.” Metals, 1304, 2021, doi:10.3390/met11081304.
LibreCat | DOI
 
[66]
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.
LibreCat | DOI
 
[65]
2020 | Conference Paper | LibreCat-ID: 24567
Krivská, Barbora, et al. “Interdiffusion in Aluminum-Steel Clad Strip.” Proc. 20th Conference of Czech and Slovak Physicists, 2020, pp. 153–54.
LibreCat
 
[64]
2020 | Book Chapter | LibreCat-ID: 23801
Reitz, Alexander, et al. “Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts.” The Minerals, Metals & Materials Series, Springer, 2020, doi:10.1007/978-3-030-36628-5_7.
LibreCat | DOI | Download (ext.)
 
[63]
2020 | Book Chapter | LibreCat-ID: 24575
Grydin, Olexandr, et al. “Influence of Nozzle Shape on Near-Surface Segregation Formation During Twin-Roll Casting of Aluminum Strips.” Light Metals 2020, 2020, pp. 1039–44, doi:10.1007/978-3-030-36408-3_141.
LibreCat | DOI
 
[62]
2020 | Journal Article | LibreCat-ID: 41519
Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, vol. 29, no. 6, Springer Science and Business Media LLC, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[61]
2020 | Journal Article | LibreCat-ID: 41518
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 11, Wiley, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[60]
2020 | Journal Article | LibreCat-ID: 23797 | OA
Reitz, Alexander, et al. “Characterization of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” Metallurgical and Materials Transactions A, Springer, 2020, pp. 5628–38, doi:10.1007/s11661-020-05976-x.
LibreCat | DOI | Download (ext.)
 
[59]
2020 | Journal Article | LibreCat-ID: 24573 | OA
Grydin, Olexandr, et al. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals, vol. 10, no. 8, 987, 2020, doi:10.3390/met10080987.
LibreCat | DOI | Download (ext.)
 
[58]
2020 | Journal Article | LibreCat-ID: 24100
Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, 2020, p. 095701, doi:10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[57]
2020 | Journal Article | LibreCat-ID: 24572
Stolbchenko, Mykhailo, et al. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced with Steel Netting.” Journal of Sandwich Structures & Materials, vol. 22, no. 6, 2020, pp. 2009–29, doi:10.1177/1099636218792539.
LibreCat | DOI
 
[56]
2020 | Journal Article | LibreCat-ID: 41520
Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[55]
2020 | Journal Article | LibreCat-ID: 41521
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, vol. 394, 125748, Elsevier BV, 2020, doi:10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[54]
2020 | Journal Article | LibreCat-ID: 41522
Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 4, Wiley, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat | DOI
 
[53]
2020 | Journal Article | LibreCat-ID: 24571
Stolbchenko, Mykhailo, et al. “The Mechanical Properties of Rolled Wire-Reinforced Aluminum Composites at Different Strain Values.” Mechanics of Advanced Materials and Structures, vol. 27, no. 18, 2020, pp. 1599–608, doi:10.1080/15376494.2018.1520941.
LibreCat | DOI
 
[52]
2020 | Journal Article | LibreCat-ID: 24254
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[51]
2020 | Journal Article | LibreCat-ID: 24092
Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[50]
2020 | Journal Article | LibreCat-ID: 24255
Tillmann, W., et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray Technology, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
LibreCat | DOI
 
[49]
2020 | Journal Article | LibreCat-ID: 24093
Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction and Transmission Electron Microscopic Investigations.” Materials Science and Engineering: A, 139597, 2020, doi:10.1016/j.msea.2020.139597.
LibreCat | DOI
 
[48]
2020 | Journal Article | LibreCat-ID: 24094
Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.” Surface and Coatings Technology, 125748, 2020, doi:10.1016/j.surfcoat.2020.125748.
LibreCat | DOI
 
[47]
2020 | Journal Article | LibreCat-ID: 24091
Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
LibreCat | DOI
 
[46]
2020 | Journal Article | LibreCat-ID: 23899
Grydin, Olexandr, et al. “Influence of Microstructure in Near‐Surface Areas of Feedstocks on the Bond Strength of Roll Bonded Aluminum Clads.” Advanced Engineering Materials, 2000130, 2020, doi:10.1002/adem.202000130.
LibreCat | DOI
 
[45]
2020 | Journal Article | LibreCat-ID: 23896
Andreiev, Anatolii, et al. “Degradable Silver‐based Alloys.” Materialwissenschaft Und Werkstofftechnik, 2020, pp. 517–30, doi:10.1002/mawe.201900191.
LibreCat | DOI
 
[44]
2019 | Book Chapter | LibreCat-ID: 24097
Hoyer, Kay-Peter, and Mirko Schaper. “Alloy Design for Biomedical Applications in Additive Manufacturing.” TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 2019, doi:10.1007/978-3-030-05861-6_44.
LibreCat | DOI
 
[43]
2019 | Book Chapter | LibreCat-ID: 24098
Tasche, Lennart, et al. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, 2019, doi:10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[42]
2019 | Book Chapter | LibreCat-ID: 41523
Tasche, Lennart, et al. “Surface Inoculation of Aluminium Powders for Additive Manufacturing Guided by Differential Fast Scanning Calorimetry.” The Minerals, Metals & Materials Series, Springer International Publishing, 2019, doi:10.1007/978-3-030-05861-6_45.
LibreCat | DOI
 
[41]
2019 | Journal Article | LibreCat-ID: 23907
Grydin, Olexandr, et al. “Flexible Hot Rolling of Extruded Shapes of Aluminum Alloy EN AW-6082.” Materials Science Forum, 2019, pp. 85–92, doi:10.4028/www.scientific.net/msf.949.85.
LibreCat | DOI
 
[40]
2019 | Journal Article | LibreCat-ID: 41524
Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol. 31, no. 9, 095701, IOP Publishing, 2019, doi:10.1088/1361-6528/ab55bc.
LibreCat | DOI
 
[39]
2019 | Journal Article | LibreCat-ID: 23900
Grydin, Olexandr, et al. “Short Austenitization Treatment with Subsequent Press Hardening: Correlation between Process Parameters, Microstructure and Mechanical Properties.” Materials Science and Engineering: A, 2019, pp. 176–95, doi:10.1016/j.msea.2019.02.025.
LibreCat | DOI
 
[38]
2019 | Journal Article | LibreCat-ID: 23901
Grydin, Olexandr, et al. “Relationships between Microstructural and Mechanical Performance on Example of an Air‐Hardening Steel.” Advanced Engineering Materials, 1900134, 2019, doi:10.1002/adem.201900134.
LibreCat | DOI
 
[37]
2018 | Conference Paper | LibreCat-ID: 24105
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[36]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[35]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, et al. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” Contributed Papers from MS&T17, 2018, doi:10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[34]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, et al. LHYBS – Lightweight Design by Novel Hybrid Materials. 2018.
LibreCat
 
[33]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., et al. Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM. 2018.
LibreCat
 
[32]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[31]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, vol. 3, no. 4, Springer Science and Business Media LLC, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[30]
2018 | Journal Article | LibreCat-ID: 41528
Engelkemeier, Katja, et al. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, vol. 2, no. 1, Springer Science and Business Media LLC, 2018, pp. 189–99, doi:10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[29]
2018 | Journal Article | LibreCat-ID: 41527
Engelkemeier, Katja, et al. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, vol. 236, Elsevier BV, 2018, pp. 752–56, doi:10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[28]
2018 | Journal Article | LibreCat-ID: 24107
Engelkemeier, Katja, et al. “Anodizing of Electrolytically Galvanized Steel Surfaces for Improved Interface Properties in Fiber Metal Laminates.” Advanced Composites and Hybrid Materials, 2018, pp. 189–99, doi:10.1007/s42114-018-0071-0.
LibreCat | DOI
 
[27]
2018 | Journal Article | LibreCat-ID: 24106
Engelkemeier, Katja, et al. “Influence of Sp3/Sp2-Carbon Ratio of Vertically Standing Carbon Nanostructures Produced by Pulsed Laser-Treatment on PAN-Based Carbon Fibers.” Materials Letters, 2018, pp. 752–56, doi:10.1016/j.matlet.2018.11.041.
LibreCat | DOI
 
[26]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, et al. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, pp. 173–85, doi:10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[25]
2018 | Journal Article | LibreCat-ID: 23902
Grydin, Olexandr, et al. “Water Quenching of Hot-Rolled Aluminum Strips: Process Integrated Heat Treatment of the Alloy EN AW-6082.” JOM, 2018, pp. 407–18, doi:10.1007/s11837-018-3144-1.
LibreCat | DOI
 
[24]
2018 | Journal Article | LibreCat-ID: 23903
Lossen, Benjamin, et al. “Friction-Spinning—Grain Structure Modification and the Impact on Stress/Strain Behaviour.” Journal of Materials Processing Technology, 2018, pp. 242–50, doi:10.1016/j.jmatprotec.2018.06.015.
LibreCat | DOI
 
[23]
2018 | Conference Paper | LibreCat-ID: 41526
Urbanek, Stefan, et al. “Additive Manufacturing of a Soft Magnetic Rotor Active Part and Shaft for a Permanent Magnet Synchronous Machine.” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), IEEE, 2018, doi:10.1109/itec.2018.8450250.
LibreCat | DOI
 
[22]
2017 | Book Chapter | LibreCat-ID: 24117
Taube, Alexander, et al. “Numerische und mechanische Untersuchung additiv gefertigter TiAl6V4 Gitterstrukturen.” Additive Fertigung von Bauteilen und Strukturen, Springer Vieweg, 2017, doi:10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[21]
2017 | Conference Paper | LibreCat-ID: 24119
Brüggemann, Jan-Peter, et al. “Optimierung Der Werkstoffeigenschaften von Selektiv Lasergeschmolzenem Alumi-Nium 7075, .” DVM - Tagung - Bruchmechanische Werkstoff- Und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden Und Anwendungen, edited by Deutscher Verband für Materialforschung und -prüfung e.V., 2017, pp. 11–22.
LibreCat
 
[20]
2017 | Journal Article | LibreCat-ID: 23904
Grydin, Olexandr, et al. “Evolution of Microstructure, Properties and Texture of a Two-Phase Low-Carbon Steel at Cold Asymmetric Rolling.” Steel Research International, 1600397, 2017, doi:10.1002/srin.201600397.
LibreCat | DOI
 
[19]
2017 | Journal Article | LibreCat-ID: 23909
Lossen, Benjamin, et al. “Friction-Spinning – Possibility of Grain Structure Adjustment.” Procedia Engineering, 2017, pp. 1749–54, doi:10.1016/j.proeng.2017.10.933.
LibreCat | DOI
 
[18]
2017 | Book Chapter | LibreCat-ID: 23910
Andreiev, Anatolii, et al. “A Rapid Heating Method for Press Hardening Processing.” Proceedings of the 3rd Pan American Materials Congress, 2017, doi:10.1007/978-3-319-52132-9_72.
LibreCat | DOI
 
[17]
2017 | Book Chapter | LibreCat-ID: 41529
Taube, Alexander, et al. “Numerische Und Mechanische Untersuchung Additiv Gefertigter TiAl6V4 Gitterstrukturen.” Additive Fertigung von Bauteilen Und Strukturen, Springer Fachmedien Wiesbaden, 2017, doi:10.1007/978-3-658-17780-5_13.
LibreCat | DOI
 
[16]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, et al. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[15]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[14]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, vol. 133, Elsevier BV, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[13]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2017, doi:10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[12]
2016 | Journal Article | LibreCat-ID: 41532
Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, vol. 13, Elsevier BV, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[11]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, vol. 2, 2016, pp. 272–98, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[10]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. 2016.
LibreCat
 
[9]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. 2016.
LibreCat
 
[8]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2016, doi:10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[7]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 272, 2016, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[6]
2016 | Journal Article | LibreCat-ID: 24110
Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured by Selective Laser Melting.” Additive Manufacturing, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
LibreCat | DOI
 
[5]
2016 | Journal Article | LibreCat-ID: 23905
Andreiev, Anatolii, et al. “Evolution of Microstructure and Properties of Steel 22MnB5 Due to Short Austenitization with Subsequent Quenching.” Steel Research International, 2016, pp. 1733–41, doi:10.1002/srin.201600086.
LibreCat | DOI
 
[4]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. 2015.
LibreCat
 
[3]
2015 | Journal Article | LibreCat-ID: 41534
Niendorf, Thomas, et al. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, vol. 46, no. 7, Springer Science and Business Media LLC, 2015, pp. 2829–33, doi:10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[2]
2015 | Journal Article | LibreCat-ID: 24112
Niendorf, Thomas, et al. “Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications.” Metallurgical and Materials Transactions A, 2015, pp. 2829–33, doi:10.1007/s11661-015-2932-2.
LibreCat | DOI
 
[1]
2015 | Journal Article | LibreCat-ID: 23906
Andreiev, Anatolii, et al. “Testing of Pipe Sections.” Materials Testing, 2015, pp. 643–48, doi:10.3139/120.110759.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed