Thomas Tröster

thomas.troester@uni-paderborn.de
ID
553

229 Publications

Mark all

[229]
2025 | Journal Article | LibreCat-ID: 58379 | OA
Chalicheemalapalli Jayasankar D, Tröster T, Marten T. Optimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency. Materials. 2025;18(3). doi:10.3390/ma18030571
LibreCat | DOI | Download (ext.)
 
[228]
2025 | Journal Article | LibreCat-ID: 58163 | OA
Wu S, Delp A, Freund J, et al. Correlation between interlaminar shear strength of CFRP and joint strength of aluminium-CFRP hybrid joints. The Journal of Adhesion. Published online 2025:1-26. doi:10.1080/00218464.2024.2439956
LibreCat | DOI | Download (ext.)
 
[227]
2025 | Journal Article | LibreCat-ID: 58451 | OA
Chalicheemalapalli Jayasankar D, Tröster T, Ellouz M, Kordisch T. Intrinsic production of metal-carbon fiber reinforced plastic hybrid shafts using vacuum-assisted resin transfer molding. Journal of Composite Materials. Published online 2025. doi:10.1177/00219983251313981
LibreCat | DOI | Download (ext.)
 
[226]
2025 | Conference Paper | LibreCat-ID: 59441
Devulapally DR, Tröster T. Modelling strategies for non-rotationally symmetric joints. In: Materials Research Proceedings. Vol 52. Materials Research Forum LLC; 2025. doi:10.21741/9781644903551-21
LibreCat | DOI
 
[225]
2024 | Journal Article | LibreCat-ID: 55762
Delp A, Wu S, Freund J, et al. Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP. Materials. 2024;17(8). doi:10.3390/ma17081907
LibreCat | DOI
 
[224]
2024 | Journal Article | LibreCat-ID: 55743
Irmak H, Tinkloh SR, Marten T, Tröster T. Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. Journal of Composites Science. 2024;8(8). doi:10.3390/jcs8080316
LibreCat | DOI
 
[223]
2024 | Conference Abstract | LibreCat-ID: 57202
Ostermann M, Marten T, Tröster T. Prospective Life Cycle Assessment of Lightweight Structures in Vehicles for On-Demand Mobility Systems. In: 16th Biennial International Conference on EcoBalance. ; 2024.
LibreCat
 
[222]
2024 | Conference Abstract | LibreCat-ID: 57537
Ostermann M, Marten T, Tröster T. Scenario-based life cycle assessment of vehicle lightweight structures. In: Sustainability in Product and Production Engineering. Automotive Circle; 2024.
LibreCat
 
[221]
2024 | Journal Article | LibreCat-ID: 57468
Chalicheemalapalli Jayasankar D, Gnaase S, Lehnert D, Walter A, Rohling R, Tröster T. Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling. Metals. 2024;14(12). doi:10.3390/met14121353
LibreCat | Files available | DOI
 
[220]
2024 | Journal Article | LibreCat-ID: 57467
Lehnert D, Bödger C, Pabel P, et al. The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component. Crystals. 2024;14(11). doi:10.3390/cryst14111001
LibreCat | Files available | DOI
 
[219]
2024 | Journal Article | LibreCat-ID: 56089 | OA
Chalicheemalapalli Jayasankar D, Gnaase S, Kaiser MA, Lehnert D, Tröster T. Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications. Metals. 2024;14(7). doi:10.3390/met14070772
LibreCat | DOI | Download (ext.)
 
[218]
2024 | Journal Article | LibreCat-ID: 58381
Suresh K, Kesavulu CR, Chalicheemalapalli Jayasankar D, et al. Stokes and anti-Stokes emission characteristics of Er3+/Yb3+ co-doped zinc tellurite glasses under 377 and 1550 nm excitations for solar energy conversion application. Journal of Luminescence. 2024;277. doi:10.1016/j.jlumin.2024.120948
LibreCat | DOI
 
[217]
2024 | Conference Paper | LibreCat-ID: 55638 | OA
Devulapally DR, Martin S, Tröster T. Non-rotationally symmetric joints – Mechanisms and load bearing capacity. In: Materials Research Proceedings. Materials Research Forum LLC; 2024. doi:10.21741/9781644903131-183
LibreCat | DOI | Download (ext.)
 
[216]
2023 | Journal Article | LibreCat-ID: 47536
Borgert T, Milaege D, Schweizer S, Homberg W, Schaper M, Tröster T. Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology. International Journal of Material Forming. 2023;16(6). doi:10.1007/s12289-023-01785-w
LibreCat | DOI
 
[215]
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak EF, Hanses H, Horwath I, Tröster T. Case Study III: Challenges of lightweight design, vehicles, and rescuers. In: Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag; 2023. doi:10.14361/9783839463772-006
LibreCat | DOI
 
[214]
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter J, Aydin S, Marten T, Tröster T. Analysis and Optimization of Joint Formation in Hybrid Compression Molding. In: ; 2023.
LibreCat
 
[213]
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar D, Stallmeister T, Lückenkötter J, Tröster T. In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding. In: ; 2023.
LibreCat | Files available
 
[212]
2023 | Book Chapter | LibreCat-ID: 44502
Ostermann M, Behm J, Marten T, et al. Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility. In: Proff H, ed. Towards the New Normal in Mobility. Springer Fachmedien Wiesbaden; 2023. doi:10.1007/978-3-658-39438-7_25
LibreCat | DOI
 
[211]
2023 | Journal Article | LibreCat-ID: 43464 | OA
Ostermann M, Grenz J, Triebus M, et al. Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures. Energies. 2023;16(8). doi:10.3390/en16083371
LibreCat | DOI | Download (ext.)
 
[210]
2023 | Conference Paper | LibreCat-ID: 44154
Lückenkötter J, Leimbach JP, Stallmeister T, Marten T, Tröster T. Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector. In: Materials Research Proceedings. Vol 28. Materials Research Forum LLC; 2023:249-258. doi:10.21741/9781644902479-27
LibreCat | DOI
 
[209]
2023 | Journal Article | LibreCat-ID: 45782 | OA
Grenz J, Ostermann M, Käsewieter K, et al. Integrating Prospective LCA in the Development of Automotive Components. Sustainability. 2023;15(13). doi:10.3390/su151310041
LibreCat | Files available | DOI | Download (ext.)
 
[208]
2023 | Journal Article | LibreCat-ID: 46486
Pfeifer F, Knorr L, Schlosser F, Marten T, Tröster T. Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes. Journal of Sustainable Development of Energy, Water and Environment Systems. 2023;11(3):1-20. doi:10.13044/j.sdewes.d11.0450
LibreCat | DOI
 
[207]
2023 | Conference Abstract | LibreCat-ID: 42459
Ostermann M, Behm J, Marten T, Tröster T. NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen. In: WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte. ; 2023.
LibreCat
 
[206]
2023 | Journal Article | LibreCat-ID: 46494
Freund J, Löbbecke M, Delp A, et al. Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints. The Journal of Adhesion. Published online 2023:1-31. doi:10.1080/00218464.2023.2223475
LibreCat | DOI
 
[205]
2023 | Journal Article | LibreCat-ID: 55760
Freund J, Lützenkirchen I, Löbbecke M, et al. Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints. Journal of Composites Science. 2023;7(10). doi:10.3390/jcs7100427
LibreCat | DOI
 
[204]
2023 | Journal Article | LibreCat-ID: 46495
Wu S, Delp A, Freund J, et al. Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process. The Journal of Adhesion. Published online 2023:1-29. doi:10.1080/00218464.2023.2245758
LibreCat | DOI
 
[203]
2023 | Conference Paper | LibreCat-ID: 48597
Wu S, Freund J, Delp A, et al. Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg. In: ; 2023.
LibreCat
 
[202]
2023 | Conference Abstract | LibreCat-ID: 49436
Kaiser MA, Reitz A, Konrad S, Meyer T, Marten T, Tröster T. Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess. In: Merklein M, ed. Workshop Warmblechumformung. Vol 18. Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung. Lehrstuhl für Fertigungstechnologie; 2023:99-118.
LibreCat
 
[201]
2023 | Conference Paper | LibreCat-ID: 50742 | OA
Bödger C, Gnaase S, Lehnert D, Tröster T. Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. In: Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. ; 2023.
LibreCat | Files available | Download (ext.)
 
[200]
2023 | Journal Article | LibreCat-ID: 37200
Gnaase S, Niggemeyer D, Lehnert D, Bödger C, Tröster T. Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. Crystals. 2023;13(2). doi:10.3390/cryst13020157
LibreCat | Files available | DOI
 
[199]
2022 | Newspaper Article | LibreCat-ID: 33001
Linnig C, Tröster T. Sauber recyceln- Innovative Verfahrenskombination mit Ultraschall ermöglicht sicheren Umgang mit recycelten Carbonfasern. CU reports. 2022.
LibreCat
 
[198]
2022 | Conference Abstract | LibreCat-ID: 37258
Haller S, Tinkloh SR, Tröster T, Brandt R. The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element. In: 5th International Conference Hybrid 2022 Material & Structures. ; 2022.
LibreCat
 
[197]
2022 | Conference Paper | LibreCat-ID: 32819
Pfeifer F, Tröster T, Marten T, Dietrich A, Nacke B, Grundmeier G. Investigation on hot sheet metal forming by means of a longitudinal flux inductor. In: Proceedings of the 6th International Conference on Steels in Cars and Trucks. ; 2022.
LibreCat
 
[196]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel D, Striewe JA, Grydin O, et al. Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications. Advanced Composite Materials. Published online 2022:1-16. doi:10.1080/09243046.2022.2143746
LibreCat | DOI
 
[195]
2022 | Journal Article | LibreCat-ID: 31496
Wu T, Kruse R, Tinkloh SR, et al. Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects. Journal of Composites Science. 2022;6(5). doi:10.3390/jcs6050138
LibreCat | DOI
 
[194]
2022 | Journal Article | LibreCat-ID: 34069
Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100133
LibreCat | DOI
 
[193]
2022 | Journal Article | LibreCat-ID: 32814
Wu T, Degener S, Tinkloh SR, et al. Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction. Composite Structures. Published online 2022. doi:10.1016/j.compstruct.2022.116071
LibreCat | DOI
 
[192]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin S, Bielak CR, Bobbert M, Tröster T, Meschut G. Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01103-w
LibreCat | DOI | Download (ext.)
 
[191]
2022 | Journal Article | LibreCat-ID: 32813 | OA
Martin S, Kurtusic K, Tröster T. Influence of the Surrounding Sheet Geometry on a Clinched Joint. Key Engineering Materials. 2022;927. doi:  https://doi.org/10.4028/p-09md1c
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Journal Article | LibreCat-ID: 32869
Stallmeister T, Tröster T. In-Mold-Assembly of Hybrid Bending Structures by Compression Molding. Key Engineering Materials. 2022;926:1457-1467. doi:10.4028/p-5fxp53
LibreCat | DOI
 
[189]
2022 | Conference Abstract | LibreCat-ID: 32871
Triebus M, Ostermann M, Tröster T, Horwath I. Advanced Automotive Components by Fiber-Metal-Laminates. In: Materials in Car Body Engineering - Bad Nauheim. ; 2022.
LibreCat
 
[188]
2022 | Conference Abstract | LibreCat-ID: 32875
Ostermann M, Behm J, Marten T, et al. Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen nachhaltiger Mobilität. In: 14. Wissenschaftsforum Mobilität. ; 2022.
LibreCat
 
[187]
2022 | Journal Article | LibreCat-ID: 30510
Delp A, Freund J, Wu S, et al. Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties. Composite Structures. 2022;285. doi:10.1016/j.compstruct.2022.115238
LibreCat | DOI
 
[186]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus M, Reitz A, Grydin O, et al. Forming Simulation of Tailored Press Hardened Parts. In: 13th European LS-DYNA Conference 2021. ; 2021.
LibreCat | Download (ext.)
 
[185]
2021 | Book | LibreCat-ID: 28461
Tröster T, Pfeifer F, Nacke B, Dietrich A. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Vol P1038. Forschungsvereinigung Stahlanwendung e.V.; 2021.
LibreCat
 
[184]
2021 | Book (Editor) | LibreCat-ID: 26996
Koch R, Gräßler I, Zimmer D, Tröster T, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol 25. Shaker Verlag; 2021.
LibreCat
 
[183]
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh SR, Wu T, Tröster T, Niendorf T. Development of a submodel technique for FFT-based solvers in micromechanical analysis. In: ; 2021.
LibreCat
 
[182]
2021 | Conference Paper | LibreCat-ID: 20857
Camberg AA, Tröster T, Latuske C. Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing. In: Springer; 2021. doi:https://doi.org/10.1007/978-3-662-62924-6_28
LibreCat | DOI
 
[181]
2021 | Conference Paper | LibreCat-ID: 20858
Camberg AA, Tröster T, Wingenbach N, Hielscher C, Grenz J. A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design. In: Springer; 2021. doi:https://doi.org/10.1007/978-3-662-62924-6_30
LibreCat | DOI
 
[180]
2021 | Journal Article | LibreCat-ID: 22518 | OA
Triebus M, Gierse J, Marten T, Tröster T. A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012052
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 22859
Grothe R, Striewe JA, Meinderink D, Tröster T, Grundmeier G. Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films. The Journal of Adhesion. 2021. doi:10.1080/00218464.2021.1957676
LibreCat | DOI
 
[178]
2021 | Report | LibreCat-ID: 29807
Linnig C, Tröster T. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Deutsche Bundesstiftung Umwelt (DBU); 2021.
LibreCat
 
[177]
2021 | Journal Article | LibreCat-ID: 24131
Wu T, Tinkloh SR, Tröster T, Zinn W, Niendorf T. Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components. Metals. Published online 2021. doi:10.3390/met11020335
LibreCat | DOI
 
[176]
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh SR, Wu T, Tröster T, Niendorf T. The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis. Metals. Published online 2021. doi:10.3390/met11010156
LibreCat | DOI
 
[175]
2021 | Journal Article | LibreCat-ID: 24130
Magnier A, Wu T, Tinkloh SR, Tröster T, Scholtes B, Niendorf T. On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites. Polymer Testing. Published online 2021. doi:10.1016/j.polymertesting.2021.107146
LibreCat | DOI
 
[174]
2021 | Conference Abstract | LibreCat-ID: 21726 | OA
Triebus M, Tröster T. HyOpt - Optimization-Based Development of Hybrid Materials. In: 9th NRW Nano Conference - Innovations in Materials and Applications. ; 2021.
LibreCat | Download (ext.)
 
[173]
2021 | Journal Article | LibreCat-ID: 33895
Camberg AA, Erhart T, Tröster T. A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials. 2021;14(17). doi:10.3390/ma14175106
LibreCat | DOI
 
[172]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin S, Schütte J, Bäumler C, Sextro W, Tröster T. Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics. 2021;6. doi:10.1016/j.finmec.2021.100065
LibreCat | DOI | Download (ext.)
 
[171]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel W-G, Bobbert M, Böhme M, et al. Hybridprofile für Trag- und Crashstrukturen. In: Intrinsische Hybridverbunde Für Leichtbautragstrukturen. ; 2021. doi:10.1007/978-3-662-62833-1_3
LibreCat | DOI
 
[170]
2021 | Journal Article | LibreCat-ID: 23431
Cheng C, Wang Z, Jin Z, et al. Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure. Composites Part B: Engineering. 2021;224. doi:10.1016/j.compositesb.2021.109209
LibreCat | DOI
 
[169]
2021 | Journal Article | LibreCat-ID: 41508
Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. 2021;831. doi:10.1016/j.msea.2021.142312
LibreCat | DOI
 
[168]
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister T, Martin S, Marten T, Tröster T. Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. In: ; 2021.
LibreCat
 
[167]
2021 | Journal Article | LibreCat-ID: 24009
Camberg AA, Erhart T, Tröster T. A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials. Published online 2021. doi:10.3390/ma14175106
LibreCat | DOI
 
[166]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology. Published online 2021. doi:10.1016/j.jmatprotec.2021.117183
LibreCat | DOI
 
[165]
2021 | Journal Article | LibreCat-ID: 27700
Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.142312
LibreCat | DOI
 
[164]
2020 | Conference Paper | LibreCat-ID: 20843
Wu T, Tinkloh SR, Tröster T, Zinn W. Residual stress measurement in GFRP/steel hybrid components. In: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. ; 2020.
LibreCat
 
[163]
2020 | Conference Paper | LibreCat-ID: 20854 | OA
Camberg AA, Tröster T. A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter. 2020. doi:10.1088/1757-899X/967/1/012077
LibreCat | DOI | Download (ext.)
 
[162]
2020 | Conference Paper | LibreCat-ID: 20856 | OA
Camberg AA, Erhart T, Tröster T. Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework. In: ; 2020. doi:10.13140/RG.2.2.23924.17288
LibreCat | DOI | Download (ext.)
 
[161]
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer S, Akbulut Irmak EF, Tröster T. Wood-based materials as a sustainable alternative for future car body construction. In: Automotive Circle; 2020.
LibreCat
 
[160]
2020 | Conference Paper | LibreCat-ID: 16939 | OA
Triebus M, Tröster T. A Holistic Approach to Optimization-Based Design of Hybrid Materials. In: Proceedings 4th International Conference Hybrid Materials & Structures. ; 2020.
LibreCat | Download (ext.)
 
[159]
2020 | Conference Paper | LibreCat-ID: 15490 | OA
Claes L, Baumhögger E, Rüther T, Gierse J, Tröster T, Henning B. Reduction of systematic measurement deviation in acoustic absorption measurement systems. In: Fortschritte Der Akustik - DAGA 2020. ; 2020:1077-1080.
LibreCat | Files available
 
[158]
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh SR, Wu T, Tröster T, Niendorf T. Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids. In: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. ; 2020.
LibreCat
 
[157]
2020 | Journal Article | LibreCat-ID: 20842
Wu T, Tinkloh SR, Tröster T, Zinn W, Niendorf T. Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method. Journal of Composites Science. Published online 2020. doi:10.3390/jcs4030143
LibreCat | DOI
 
[156]
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar D, Stallmeister T, Wang Z, Tröster T. MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED. In: Hausmann JM, Siebert M, von Hehl A, Weidenmann KA, eds. Hybrid 2020 Materials and Structures. ; 2020:167-172.
LibreCat | Files available
 
[155]
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh SR, Wu T, Tröster T, Niendorf T. A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. Composite Structures. 2020;238. doi:10.1016/j.compstruct.2020.111926
LibreCat | DOI
 
[154]
2020 | Journal Article | LibreCat-ID: 58383
Basavapoornima Ch, Maheswari T, Chalicheemalapalli Jayasankar D, Kesavulu CR, Tröster T, Jayasankar CK. Thermal, structural, mechanical and 1.8 μm luminescence properties of the thulium doped Pb-K-Al-Na glasses for optical fiber amplifiers. Journal of Non-Crystalline Solids. 2020;530. doi:10.1016/j.jnoncrysol.2019.119773
LibreCat | DOI
 
[153]
2019 | Report | LibreCat-ID: 21210
Ahlers D, Tröster T. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn; 2019. doi:https://doi.org/10.2314/KXP:1695591887
LibreCat | DOI
 
[152]
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer F, Dietrich A, Marten T, Tröster T, Nacke B. Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process. In: Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel. ; 2019:585-593.
LibreCat
 
[151]
2019 | Conference Paper | LibreCat-ID: 16794
Striewe JA, Thomas R, Fischer F, Wiens T, Tröster T. Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung. In: Sankt Augustin: DGM-Inventum GmbH ; 2019.
LibreCat
 
[150]
2019 | Misc | LibreCat-ID: 16825
Ahlers D, Tröster T. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. Maastricht: EuroPM; 2019.
LibreCat
 
[149]
2019 | Conference Paper | LibreCat-ID: 16827
Camberg AA, Tröster T. Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks. In: 26. Sächsische Fachtagung Umformtechnik. ; 2019.
LibreCat
 
[148]
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh SR, Wu T, Tröster T, Niendorf T. A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures. In: ; 2019.
LibreCat
 
[147]
2019 | Journal Article | LibreCat-ID: 15875
Camberg AA, Tröster T, Bohner F, Tölle J. Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. IOP Conference Series: Materials Science and Engineering. 2019;651:012057. doi:10.1088/1757-899X/651/1/012057
LibreCat | DOI
 
[146]
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak EF, Tröster T. Fracture prediction of additively manufactured AlSi10Mg materials. Procedia Structural Integrity. 2019:190-197. doi:10.1016/j.prostr.2019.12.101
LibreCat | DOI
 
[145]
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak EF, Hanses J, Schweizer S, Tröster T. Modeling the Energy Absorption Characteristics of Wood Crash Elements. In: ; 2019.
LibreCat
 
[144]
2019 | Report | LibreCat-ID: 16029
Marten T, Tröster T. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH; 2019.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 16030
Triebus M, Bienia S, Marten T, Tröster T, Dröder K. Press Hardening Integrated Structuring for Hybrid Components. In: Verlag Wissenschaftliche Scripten; 2019.
LibreCat
 
[142]
2019 | Book Chapter | LibreCat-ID: 13436
Camberg AA, Stratmann I, Tröster T. TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In: Technologies for Economical and Functional Lightweight Design. Berlin, Heidelberg; 2019. doi:10.1007/978-3-662-58206-0_12
LibreCat | DOI
 
[141]
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister T, Chalicheemalapalli Jayasankar D, Wang Z, Tröster T. Self-sealing tool concept for RTM-processes. In: ; 2019.
LibreCat
 
[140]
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister T, Chalicheemalapalli Jayasankar D, Wang Z, Tröster T. Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. In: ; 2019.
LibreCat
 
[139]
2019 | Conference Paper | LibreCat-ID: 16027
Camberg AA, Striewe M, Tröster T, Bohner F, Tölle J. Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions. In: 5th MATFEM Conference. MATFEM; 2019.
LibreCat
 
[138]
2019 | Book | LibreCat-ID: 16795
Striewe JA, Tröster T, Kowatz J, Meschut G, Grothe R, Grundmeier G. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung; 2019.
LibreCat
 
[137]
2019 | Conference Paper | LibreCat-ID: 16028
Grothe R, Striewe JA, Kowatz J, Grundmeier G, Tröster T, Meschut G. Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. In: ; 2019.
LibreCat
 
[136]
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg AA, Tröster T, Sotirov N, Tölle J, Bohner F. Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions. In: Materials Science and Engineering (MSE) Congress 2018. Darmstadt; 2018.
LibreCat
 
[135]
2018 | Misc | LibreCat-ID: 6594
Claes L, Zeipert H, Koppa P, Tröster T, Henning B. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck; 2018.
LibreCat
 
[134]
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski N, Lian J, Camberg AA, et al. Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models. In: ; 2018. doi:10.1063/1.5035024
LibreCat | DOI
 
[133]
2018 | Conference Paper | LibreCat-ID: 16034
Camberg AA, Tröster T. Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche Gesellschaft für Materialkunde e.V.; 2018.
LibreCat
 
[132]
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers D, Tröster T. Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. In: ; 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 16040
Wang Z, Tröster T. Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. In: ; 2018.
LibreCat
 
[130]
2018 | Conference Paper | LibreCat-ID: 16042 | OA
Triebus M, Tröster T, Camberg AA, Bienia S, Dröder K. Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In: 15. Deutsches LS-Dyna Forum. ; 2018.
LibreCat | Download (ext.)
 
[129]
2018 | Conference Paper | LibreCat-ID: 16043 | OA
Camberg AA, Tröster T, Schneidt A, Sotirov N, Tölle J. The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In: 15. Deutsches LS-Dyna Forum. ; 2018.
LibreCat | Download (ext.)
 
[128]
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer S, Tröster T. Holz als Werkstoff im Automobil. In: ; 2018.
LibreCat
 
[127]
2018 | Conference Paper | LibreCat-ID: 16057
Wang Z, Tröster T. Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. In: ; 2018.
LibreCat
 
[126]
2018 | Journal Article | LibreCat-ID: 13439
Camberg AA, Bohner F, Tölle J, Schneidt A, Meiners S, Tröster T. Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models. IOP Conference Series: Materials Science and Engineering. 2018. doi:10.1088/1757-899x/418/1/012018
LibreCat | DOI
 
[125]
2018 | Conference Paper | LibreCat-ID: 16052
Horwath I, Dohmeier-Fischer S, Weiß-Borkowski N, Tröster T. FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING. In: INTED2018 Proceedings. ; 2018. doi:10.21125/inted.2018.1651
LibreCat | DOI
 
[124]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[123]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers D, Tröster T, Hermann S, et al. Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. In: Contributed Papers from MS&T17. ; 2018. doi:10.7449/2018mst/2018/mst_2018_117_124
LibreCat | DOI
 
[122]
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski N, Horwath I, Berscheid A, Dohmeier-Fischer S, Tröster T. NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH. In: INTED2018 Proceedings. ; 2018. doi:10.21125/inted.2018.1298
LibreCat | DOI
 
[121]
2018 | Conference Paper | LibreCat-ID: 16035
Striewe JA, Grothe R, Kowatz J, Tröster T, Grundmeier G, Meschut G. Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness. In: ; 2018.
LibreCat
 
[120]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg AA, Tröster T, Heggemann T, et al. LHYBS – Lightweight Design by Novel Hybrid Materials. In: ; 2018.
LibreCat
 
[119]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn C, Wang Z, Tröster T, Schaper M. Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM. In: ; 2018.
LibreCat
 
[118]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[117]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. 2018;3(4):221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[116]
2018 | Journal Article | LibreCat-ID: 15958
Zinn C, Bobbert M, Dammann C, et al. Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering. Published online 2018:173-185. doi:10.1016/j.compositesb.2018.05.030
LibreCat | DOI
 
[115]
2017 | Conference Paper | LibreCat-ID: 6559
Claes L, Zeipert H, Koppa P, Tröster T, Henning B. Additively manufactured acoustic diffuser structures for ultrasonic measurement applications. In: Proceedings of Meetings on Acoustics. Honolulu; 2017:030004. doi:10.1121/2.0000688
LibreCat | DOI
 
[114]
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating. In: ; 2017.
LibreCat
 
[113]
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Effects of Holes in Blanks for Press Hardening Process due to Induction Heating. In: ; 2017.
LibreCat
 
[112]
2017 | Journal Article | LibreCat-ID: 15941
Reuter C, Sauerland K-H, Tröster T. Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading. Composite Structures. 2017:33-44. doi:10.1016/j.compstruct.2017.04.052
LibreCat | DOI
 
[111]
2017 | Journal Article | LibreCat-ID: 15942
Reuter C, Tröster T. Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures. 2017;117:1-9. doi:10.1016/j.tws.2017.03.034
LibreCat | DOI
 
[110]
2017 | Journal Article | LibreCat-ID: 15944
Striewe JA, Reuter C, Sauerland K-H, Tröster T. Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures. 2017:501-508. doi:10.1016/j.tws.2017.11.011
LibreCat | DOI
 
[109]
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski N, Lian J, Marten T, Tröster T, Münstermann S, Bleck W. Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model. In: Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. ; 2017. doi:10.1063/1.5007961
LibreCat | DOI
 
[108]
2017 | Journal Article | LibreCat-ID: 16062
Schweizer S, Becker-Staines A, Tröster T. Separation of Hybrid Structures for the Reclaim of their Single Components. Key Engineering Materials. 2017:568-575. doi:10.4028/www.scientific.net/kem.742.568
LibreCat | DOI
 
[107]
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers D, Tröster T. Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. In: ; 2017.
LibreCat
 
[106]
2017 | Conference Paper | LibreCat-ID: 16065
Kutz P, Wang Z, Ellouz M, Kordisch T, Tröster T. Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. In: ; 2017.
LibreCat
 
[105]
2017 | Conference Paper | LibreCat-ID: 16071
Wang Z, Kutz P, Tröster T. Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. In: ; 2017.
LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. In: ; 2017.
LibreCat
 
[103]
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. In: ; 2017.
LibreCat
 
[102]
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In: ; 2017.
LibreCat
 
[101]
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung. In: ; 2017.
LibreCat
 
[100]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers D, Koppa P, Hengsbach F, et al. Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. In: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. ; 2017.
LibreCat
 
[99]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. Published online 2017:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat | DOI
 
[98]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. 2017;133:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat | DOI
 
[97]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites. Published online 2017. doi:10.1504/ijautoc.2016.10005303
LibreCat | DOI
 
[96]
2016 | Journal Article | LibreCat-ID: 15962
Tröster T, Camberg AA, Sanitther B, Wang Z, Lauter C. Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology. International Journal of Automotive Composites. 2016;2:229-243. doi:10.1504/ijautoc.2016.10005304
LibreCat | DOI
 
[95]
2016 | Journal Article | LibreCat-ID: 16139
Schweizer S, Tröster T. Recyclingkonzepte für hybride Strukturen. Carbon Composites Magazin. 2016;(2):23.
LibreCat
 
[94]
2016 | Journal Article | LibreCat-ID: 16146
Grienitz V, Tröster T, Meiners S. Technikevaluation für die generative Fertigung eines Serien-Radträgers. ATZ - Automobiltechnische Zeitschrift. 2016:36-41. doi:10.1007/s35148-016-0090-5
LibreCat | DOI
 
[93]
2016 | Conference Paper | LibreCat-ID: 16264
Wang Z, Tröster T. Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren. In: ; 2016.
LibreCat
 
[92]
2016 | Conference Paper | LibreCat-ID: 16266
Striewe JA, Reuter C, Oberkönig C, Lauter C, Tröster T. Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe. In: ; 2016.
LibreCat
 
[91]
2016 | Conference Paper | LibreCat-ID: 16267
Striewe JA, Lauter C, Reuter C, Tröster T. Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites. In: ; 2016.
LibreCat
 
[90]
2016 | Conference Paper | LibreCat-ID: 16268
Striewe JA, Reuter C, Lauter C, Tröster T. Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures. In: ; 2016.
LibreCat
 
[89]
2016 | Conference Paper | LibreCat-ID: 16269
Wang Z, Lauter C, Löseke J, Tröster T. CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications. In: ; 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16270
Hickmann T, Ahlers D, Tröster T. Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer . 2016;(5).
LibreCat
 
[87]
2016 | Journal Article | LibreCat-ID: 16137
Lauter C, Reuter C, Wu S, Tröster T. Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering. 2016;10(5):875-880. doi:doi.org/10.5281/zenodo.1124481
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 15963
Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites. 2016;2:272-298. doi:10.1504/ijautoc.2016.10005305
LibreCat | DOI
 
[85]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. In: ; 2016.
LibreCat
 
[84]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn C, Bobbert M, Dammann C, et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. In: ; 2016.
LibreCat
 
[83]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert M, Augethaler F, Wang Z, Tröster T, Meschut G. Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications. Journal of Materials Science Research. Published online 2016. doi:10.5539/jmsr.v6n1p15
LibreCat | DOI
 
[82]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites. Published online 2016. doi:10.1504/ijautoc.2016.10005303
LibreCat | DOI
 
[81]
2016 | Journal Article | LibreCat-ID: 16141
Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites. Published online 2016. doi:10.1504/ijautoc.2016.10005305
LibreCat | DOI
 
[80]
2015 | Journal Article | LibreCat-ID: 15964
Leuders S, Vollmer M, Brenne F, Tröster T, Niendorf T. Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting. Metallurgical and Materials Transactions A. 2015:3816-3823. doi:10.1007/s11661-015-2864-x
LibreCat | DOI
 
[79]
2015 | Conference Paper | LibreCat-ID: 16131
Marten T, Block H, Tröster T. Partial hardening of new press hardenable steels. In: ; 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski N, Marten T, Block H, Tröster T. Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests. In: ; 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16135
Frantz M, Lauter C, Wang Z, Tröster T. Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK). In: Verlag Stahleisen GmbH; 2015:139-144.
LibreCat
 
[76]
2015 | Conference Paper | LibreCat-ID: 16136
Reuter C, Tröster T, Lauter C. Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna. In: Verlag Stahleisen GmbH; 2015:127-132.
LibreCat
 
[75]
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik W, Leuders S, Riemer A, Tröster T, Richard HA, Niendorf T. Fatigue life prediction for metals processed by Selective Laser Melting using finite element analyses. In: ; 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16259
Wang Z, Lauter C, Sanitther B, Frantz M, Tröster T. Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding. In: ; 2015.
LibreCat
 
[73]
2015 | Conference Paper | LibreCat-ID: 16260
Lauter C, Wang Z, Tröster T, Brandis R, Köchling D. Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design. In: ; 2015.
LibreCat
 
[72]
2015 | Conference Paper | LibreCat-ID: 16261
Leuders S, Meiners S, Taube A, Tröster T, Niendorf T. Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting. In: ; 2015.
LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach N, Tröster T. Material follows form follows function. In: ; 2015.
LibreCat
 
[70]
2015 | Conference Paper | LibreCat-ID: 16133
Lauter C, Wang Z, Koke I, Tröster T. Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology. In: ; 2015.
LibreCat
 
[69]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. In: ; 2015.
LibreCat
 
[68]
2015 | Conference Paper | LibreCat-ID: 23061
Lauter C, Wang Z, Koke I, Tröster T. Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology. In: 20th International Conference on Composite Materials, Copenhagen. ; 2015.
LibreCat
 
[67]
2014 | Journal Article | LibreCat-ID: 15966
Niendorf T, Leuders S, Riemer A, et al. Functionally Graded Alloys Obtained by Additive Manufacturing. Advanced Engineering Materials. 2014:857-861. doi:10.1002/adem.201300579
LibreCat | DOI
 
[66]
2014 | Journal Article | LibreCat-ID: 15967
Riemer A, Leuders S, Thöne M, Richard HA, Tröster T, Niendorf T. On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting. Engineering Fracture Mechanics. 2014:15-25. doi:10.1016/j.engfracmech.2014.03.008
LibreCat | DOI
 
[65]
2014 | Conference Paper | LibreCat-ID: 16097
Klein M, Hülsbusch D, Walther F, et al. Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids. In: ; 2014:188-193.
LibreCat
 
[64]
2014 | Conference Paper | LibreCat-ID: 16099
Frantz M, Lauter C, Tröster T, et al. Efficient manufacturing of hybrid structures consisting of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung. In: ; 2014.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16120
Block H, Marten T, Tröster T. Crash simulation of high strength automotive components using advanced failure models. In: ; 2014.
LibreCat
 
[62]
2014 | Journal Article | LibreCat-ID: 16122
Lauter C, Niewel J, Tröster T. Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications. International Journal of Automotive Composites. 2014. doi:10.1504/ijautoc.2014.064127
LibreCat | DOI
 
[61]
2014 | Conference Paper | LibreCat-ID: 16128
Block H, Marten T, Weiß Borkowski N, Tröster T. Crash performance of the new press hardenable steel 15MnB6. In: ; 2014.
LibreCat
 
[60]
2014 | Conference Paper | LibreCat-ID: 16129
Reuter C, Flore D, Pöhler S, Sauerland KH, Tröster T. Numerical simulation of the energy absorption of fiber-reinforced plastics. In: ; 2014.
LibreCat
 
[59]
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski N, Marten T, Tröster T. Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. In: ; 2014.
LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16255
Leuders S, Riemer A, Richard HA, Tröster T, Niendorf T. Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent defects on the initiation and propagation of fatigue cracks. In: ; 2014.
LibreCat
 
[57]
2014 | Conference Paper | LibreCat-ID: 16256
Leuders S, Tröster T, Brenne F, Riemer A, Richard HA, Niendorf T. Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting. In: ; 2014.
LibreCat
 
[56]
2014 | Conference Paper | LibreCat-ID: 16257
Leuders S, Tröster T, Riemer A, Richard HA, Niendorf T. On the mechanical performance of structures manufactured by selective laser melting: Damage initiation and propagation. In: ; 2014.
LibreCat
 
[55]
2014 | Journal Article | LibreCat-ID: 15965
Leuders S, Lieneke T, Lammers S, Tröster T, Niendorf T. On the fatigue properties of metals manufactured by selective laser melting – The role of ductility. Journal of Materials Research. Published online 2014:1911-1919. doi:10.1557/jmr.2014.157
LibreCat | DOI
 
[54]
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer E, Budde C, Tröster T, Pöhler S. Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic. In: ; 2014:101-108.
LibreCat
 
[53]
2014 | Journal Article | LibreCat-ID: 16125
Moritzer E, Budde C, Tröster T, Pöhler S. Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination. Joining Plastics . 2014;8(2):100-105.
LibreCat
 
[52]
2013 | Journal Article | LibreCat-ID: 15968
Niendorf T, Leuders S, Riemer A, Richard HA, Tröster T, Schwarze D. Highly Anisotropic Steel Processed by Selective Laser Melting. Metallurgical and Materials Transactions B. 2013:794-796. doi:10.1007/s11663-013-9875-z
LibreCat | DOI
 
[51]
2013 | Journal Article | LibreCat-ID: 16016
Riemer A, Leuders S, Richard HA, Tröster T. Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗. Materials Testing. 2013:537-543. doi:10.3139/120.110468
LibreCat | DOI
 
[50]
2013 | Conference Paper | LibreCat-ID: 16017
Marten T, Block H, Tröster T, Gerber T, Sikora S, Lenze F-J. Graded Lightweight Structures Through Hot Forming. In: ; 2013.
LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16018
Lauter C, Hochschulz T, Frantz M, Tröster T. Influences of Automotive Process Characteristics on Hybrid Structures. In: ; 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16019
Siewers B, Lauter C, Tröster T. Curing of fibre reinforced plastics by resistance heating of sheet metal in a hybrid structure. In: ; 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16020
Tröster T, Lauter C, Reuter C. Crashworthiness of Hybrid Structures. In: ; 2013.
LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16021
Siewers B, Lauter C, Tröster T. Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures. In: ; 2013.
LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16022
Lauter C, Krooß T, Tröster T. Manufacturing of Hybrid Structures by Prepreg Press Technology. In: ; 2013.
LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16023
Tröster T, Lauter C, Reuter C. Leichtbau mit Hybridstrukturen im Automobil. In: ; 2013.
LibreCat
 
[43]
2013 | Conference Paper | LibreCat-ID: 16024
Leuders S, Riemer A, Niendorf T, Richard HA, Tröster T. On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects. In: ; 2013.
LibreCat
 
[42]
2013 | Conference Paper | LibreCat-ID: 16025
Marten T, Block H, Tröster T. Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess. In: ; 2013.
LibreCat
 
[41]
2013 | Conference Paper | LibreCat-ID: 16026
Riemer A, Leuders S, Richard HA, Tröster T. Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen. In: ; 2013.
LibreCat
 
[40]
2013 | Book Chapter | LibreCat-ID: 16096
Lauter C, Tröster T, Reuter C. Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications. In: Advanced Composite Materials for Automotive Applications. Chichester, UK; 2013. doi:10.1002/9781118535288.ch7
LibreCat | DOI
 
[39]
2012 | Journal Article | LibreCat-ID: 15981
Tröster T, Marten T, Thomas D, Block H, Lauter C, Thöne M. Automobilleichtbau mit innovativen Werkstoffen und Prozessen. Forschungsforum Paderborn. 2012;15(15/2012):30-38.
LibreCat
 
[38]
2012 | Journal Article | LibreCat-ID: 15983
Lauter C, Werneke S, Siewers B, Tröster T. Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. Lightweight Design. 2012:53-58. doi:10.1365/s35725-012-0079-2
LibreCat | DOI
 
[37]
2012 | Conference Paper | LibreCat-ID: 15985
Reuter C, Frantz M, Lauter C, Block H, Tröster T. Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. In: ; 2012.
LibreCat
 
[36]
2012 | Conference Paper | LibreCat-ID: 15987
Lauter C, Frantz M, Kohler JP, Tröster T. Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.
LibreCat
 
[35]
2012 | Conference Paper | LibreCat-ID: 15988
Lauter C, Sarrazin M, Tröster T. Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. In: ; 2012.
LibreCat
 
[34]
2012 | Journal Article | LibreCat-ID: 15989
Ickert L, Thomas D, Tröster T, Eckstein L. Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. FAT-Schriftenreihe 244. 2012;(244).
LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16004
Lauter C, Siewers B, Zanft B, Tröster T. Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.
LibreCat
 
[32]
2012 | Conference Paper | LibreCat-ID: 16007
Thöne M, Leuders S, Riemer A, Tröster T, Richard HA. Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. In: ; 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16008
Riemer A, Leuders S, Tröster T, Richard HA. Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit. 2012.
LibreCat
 
[30]
2012 | Conference Paper | LibreCat-ID: 16009
Leuders S, Riemer A, Tröster T, Richard HA. Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. In: ; 2012.
LibreCat
 
[29]
2012 | Report | LibreCat-ID: 16012
Tröster T, Marten T, Adelbert S, Kadim A. P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH; 2012.
LibreCat
 
[28]
2012 | Journal Article | LibreCat-ID: 16015
Leuders S, Thöne M, Riemer A, et al. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue. 2012:300-307. doi:10.1016/j.ijfatigue.2012.11.011
LibreCat | DOI
 
[27]
2012 | Journal Article | LibreCat-ID: 15984
Schmidt HC, Damerow U, Lauter C, et al. Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements. Key Engineering Materials. Published online 2012:295-300. doi:10.4028/www.scientific.net/kem.504-506.295
LibreCat | DOI
 
[26]
2012 | Conference Paper | LibreCat-ID: 15986
Gorny B, Hankeln F, Lauter C, et al. Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs. In: ; 2012.
LibreCat
 
[25]
2012 | Journal Article | LibreCat-ID: 16010
Lauter C, Tröster T, Brandis R, Gausemeier J. Methodik für die Produktentstehung hybrider Leichtbaustrukturen. Lightweight Design. 2012;5:50-56. doi:10.1365/s35725-013-0137-4
LibreCat | DOI
 
[24]
2011 | Journal Article | LibreCat-ID: 15969
Lauter C, Sarrazin M, Tröster T. Multimaterialsysteme höchstfest verbunden. Adhäsion – Kleben und Dichten. 2011;3/2011:39-43.
LibreCat
 
[23]
2011 | Conference Paper | LibreCat-ID: 15971
Frantz M, Stübbe O, Lauter C, Schrange J, Tröster T. Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. In: ; 2011.
LibreCat
 
[22]
2011 | Conference Paper | LibreCat-ID: 15972
Thomas D, Block H, Tröster T, Krogmeier J. Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. In: ; 2011.
LibreCat
 
[21]
2011 | Journal Article | LibreCat-ID: 15974
Marten T, Lauter C, Tröster T. Automobilleichtbau durch höchstfeste Multimaterialsysteme. Ingenieurspiegel. 2011;2/2011:67-69.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 15975
Lauter C, Thomas D, Frantz M, Niewel J, Tröster T. Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte. 2011;2:6-7.
LibreCat
 
[19]
2011 | Journal Article | LibreCat-ID: 15980
Lauter C, Frantz M, Siewers B, Tröster T. Hybrid structures for tailored structural automotive components. JEC Composites Magazine. 2011;69:35-37.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15990
Thomas D, Block H, Tröster T. Production of load-adapted lightweight designs by partial hardening. In: ; 2011.
LibreCat
 
[17]
2011 | Journal Article | LibreCat-ID: 15992
Gorny B, Niendorf T, Lackmann J, Thoene M, Tröster T, Maier HJ. In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Materials Science and Engineering: A. 2011;528(27):7962-7967. doi:10.1016/j.msea.2011.07.026
LibreCat | DOI
 
[16]
2011 | Journal Article | LibreCat-ID: 15993
Lauter C, Frantz M, Tröster T. Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen. Lightweight Design. 2011;4:48-54.
LibreCat
 
[15]
2011 | Conference Paper | LibreCat-ID: 15996
Frantz M, Lauter C, Tröster T. Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP. In: ; 2011.
LibreCat
 
[14]
2011 | Journal Article | LibreCat-ID: 15997
Lauter C, Frantz M, Marten T, Tröster T, Bach G, Seliger G. Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe. 2011;(09/2011).
LibreCat
 
[13]
2011 | Journal Article | LibreCat-ID: 15998
Frantz M, Lauter C, Tröster T. Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe. 2011;(10/2011).
LibreCat
 
[12]
2011 | Conference Paper | LibreCat-ID: 15999
Marten T, Tröster T, Adelbert S, Kadim A. Fluidized bed heating of blanks for the hot forming process. In: ; 2011.
LibreCat
 
[11]
2011 | Conference Paper | LibreCat-ID: 16002
Tröster T, Lauter C. Hybridstrukturen für den automobilen Leichtbau. In: ; 2011.
LibreCat
 
[10]
2011 | Journal Article | LibreCat-ID: 16013
Lauter C, Frantz M, Tröster T. Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen. Lightweight Design. 2011;4:48-54. doi:10.1365/s35725-011-0044-5
LibreCat | DOI
 
[9]
2011 | Journal Article | LibreCat-ID: 16000
Marten T, Niewel J, Tröster T. Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess. HTM Journal of Heat Treatment and Materials. Published online 2011:309-315. doi:10.3139/105.110119
LibreCat | DOI
 
[8]
2011 | Conference Paper | LibreCat-ID: 15970
Lauter C, Damerow U, Frantz M, Tröster T, Homberg W. Produktionsverfahren zur Herstellung höchstfester hybrider Leichtbaustrukturen für den Einsatz im Automobil. In: ; 2011.
LibreCat
 
[7]
2011 | Conference Paper | LibreCat-ID: 15991
Lauter C, Dau J, Tröster T, Homberg W. Manufacturing processes for automotive structures in multi-material design consisting of sheet metal and CFRP prepregs. In: ; 2011.
LibreCat
 
[6]
2011 | Conference Paper | LibreCat-ID: 15994
Dau J, Lauter C, Damerow U, Homberg W, Tröster T. Multi-material systems for tailored automotive structural components. In: ; 2011.
LibreCat
 
[5]
2009 | Journal Article | LibreCat-ID: 15953
Böke J, Erhardt R, Rostek W, Tröster T. Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau*. Materials Testing. 2009:22-27. doi:10.3139/120.110002
LibreCat | DOI
 
[4]
2008 | Conference Paper | LibreCat-ID: 15954
Tröster T, Howe C, Müller M, Rostek W. Development status and market potential of hot formed ballistic steels. In: ; 2008.
LibreCat
 
[3]
2008 | Conference Paper | LibreCat-ID: 33878
Tröster T, Rostek W, Böke J, Erhardt R. Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau. In: DVM, ed. Ein wesentlicher Beitrag zur Klimadebatte. Vol 675. DVM-Bericht. ; 2008.
LibreCat
 
[2]
2007 | Book | LibreCat-ID: 33880
Tröster T, Berg J. Ermittlung dynamischer Grenzformänderungsdiagramme für Karosseriestähle. Vol P727. Verlag- und Vertriebsgesellschaft Düsseldorf; 2007.
LibreCat
 
[1]
2004 | Conference Paper | LibreCat-ID: 33881
Tröster T, Rostek W. Innovative Warmumformung. In: Tröster T, Rostek W, eds. Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung” in Fellbach. Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung.” ; 2004:51-66.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed

229 Publications

Mark all

[229]
2025 | Journal Article | LibreCat-ID: 58379 | OA
Chalicheemalapalli Jayasankar D, Tröster T, Marten T. Optimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency. Materials. 2025;18(3). doi:10.3390/ma18030571
LibreCat | DOI | Download (ext.)
 
[228]
2025 | Journal Article | LibreCat-ID: 58163 | OA
Wu S, Delp A, Freund J, et al. Correlation between interlaminar shear strength of CFRP and joint strength of aluminium-CFRP hybrid joints. The Journal of Adhesion. Published online 2025:1-26. doi:10.1080/00218464.2024.2439956
LibreCat | DOI | Download (ext.)
 
[227]
2025 | Journal Article | LibreCat-ID: 58451 | OA
Chalicheemalapalli Jayasankar D, Tröster T, Ellouz M, Kordisch T. Intrinsic production of metal-carbon fiber reinforced plastic hybrid shafts using vacuum-assisted resin transfer molding. Journal of Composite Materials. Published online 2025. doi:10.1177/00219983251313981
LibreCat | DOI | Download (ext.)
 
[226]
2025 | Conference Paper | LibreCat-ID: 59441
Devulapally DR, Tröster T. Modelling strategies for non-rotationally symmetric joints. In: Materials Research Proceedings. Vol 52. Materials Research Forum LLC; 2025. doi:10.21741/9781644903551-21
LibreCat | DOI
 
[225]
2024 | Journal Article | LibreCat-ID: 55762
Delp A, Wu S, Freund J, et al. Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP. Materials. 2024;17(8). doi:10.3390/ma17081907
LibreCat | DOI
 
[224]
2024 | Journal Article | LibreCat-ID: 55743
Irmak H, Tinkloh SR, Marten T, Tröster T. Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. Journal of Composites Science. 2024;8(8). doi:10.3390/jcs8080316
LibreCat | DOI
 
[223]
2024 | Conference Abstract | LibreCat-ID: 57202
Ostermann M, Marten T, Tröster T. Prospective Life Cycle Assessment of Lightweight Structures in Vehicles for On-Demand Mobility Systems. In: 16th Biennial International Conference on EcoBalance. ; 2024.
LibreCat
 
[222]
2024 | Conference Abstract | LibreCat-ID: 57537
Ostermann M, Marten T, Tröster T. Scenario-based life cycle assessment of vehicle lightweight structures. In: Sustainability in Product and Production Engineering. Automotive Circle; 2024.
LibreCat
 
[221]
2024 | Journal Article | LibreCat-ID: 57468
Chalicheemalapalli Jayasankar D, Gnaase S, Lehnert D, Walter A, Rohling R, Tröster T. Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling. Metals. 2024;14(12). doi:10.3390/met14121353
LibreCat | Files available | DOI
 
[220]
2024 | Journal Article | LibreCat-ID: 57467
Lehnert D, Bödger C, Pabel P, et al. The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component. Crystals. 2024;14(11). doi:10.3390/cryst14111001
LibreCat | Files available | DOI
 
[219]
2024 | Journal Article | LibreCat-ID: 56089 | OA
Chalicheemalapalli Jayasankar D, Gnaase S, Kaiser MA, Lehnert D, Tröster T. Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications. Metals. 2024;14(7). doi:10.3390/met14070772
LibreCat | DOI | Download (ext.)
 
[218]
2024 | Journal Article | LibreCat-ID: 58381
Suresh K, Kesavulu CR, Chalicheemalapalli Jayasankar D, et al. Stokes and anti-Stokes emission characteristics of Er3+/Yb3+ co-doped zinc tellurite glasses under 377 and 1550 nm excitations for solar energy conversion application. Journal of Luminescence. 2024;277. doi:10.1016/j.jlumin.2024.120948
LibreCat | DOI
 
[217]
2024 | Conference Paper | LibreCat-ID: 55638 | OA
Devulapally DR, Martin S, Tröster T. Non-rotationally symmetric joints – Mechanisms and load bearing capacity. In: Materials Research Proceedings. Materials Research Forum LLC; 2024. doi:10.21741/9781644903131-183
LibreCat | DOI | Download (ext.)
 
[216]
2023 | Journal Article | LibreCat-ID: 47536
Borgert T, Milaege D, Schweizer S, Homberg W, Schaper M, Tröster T. Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology. International Journal of Material Forming. 2023;16(6). doi:10.1007/s12289-023-01785-w
LibreCat | DOI
 
[215]
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak EF, Hanses H, Horwath I, Tröster T. Case Study III: Challenges of lightweight design, vehicles, and rescuers. In: Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag; 2023. doi:10.14361/9783839463772-006
LibreCat | DOI
 
[214]
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter J, Aydin S, Marten T, Tröster T. Analysis and Optimization of Joint Formation in Hybrid Compression Molding. In: ; 2023.
LibreCat
 
[213]
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar D, Stallmeister T, Lückenkötter J, Tröster T. In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding. In: ; 2023.
LibreCat | Files available
 
[212]
2023 | Book Chapter | LibreCat-ID: 44502
Ostermann M, Behm J, Marten T, et al. Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility. In: Proff H, ed. Towards the New Normal in Mobility. Springer Fachmedien Wiesbaden; 2023. doi:10.1007/978-3-658-39438-7_25
LibreCat | DOI
 
[211]
2023 | Journal Article | LibreCat-ID: 43464 | OA
Ostermann M, Grenz J, Triebus M, et al. Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures. Energies. 2023;16(8). doi:10.3390/en16083371
LibreCat | DOI | Download (ext.)
 
[210]
2023 | Conference Paper | LibreCat-ID: 44154
Lückenkötter J, Leimbach JP, Stallmeister T, Marten T, Tröster T. Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector. In: Materials Research Proceedings. Vol 28. Materials Research Forum LLC; 2023:249-258. doi:10.21741/9781644902479-27
LibreCat | DOI
 
[209]
2023 | Journal Article | LibreCat-ID: 45782 | OA
Grenz J, Ostermann M, Käsewieter K, et al. Integrating Prospective LCA in the Development of Automotive Components. Sustainability. 2023;15(13). doi:10.3390/su151310041
LibreCat | Files available | DOI | Download (ext.)
 
[208]
2023 | Journal Article | LibreCat-ID: 46486
Pfeifer F, Knorr L, Schlosser F, Marten T, Tröster T. Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes. Journal of Sustainable Development of Energy, Water and Environment Systems. 2023;11(3):1-20. doi:10.13044/j.sdewes.d11.0450
LibreCat | DOI
 
[207]
2023 | Conference Abstract | LibreCat-ID: 42459
Ostermann M, Behm J, Marten T, Tröster T. NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen. In: WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte. ; 2023.
LibreCat
 
[206]
2023 | Journal Article | LibreCat-ID: 46494
Freund J, Löbbecke M, Delp A, et al. Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints. The Journal of Adhesion. Published online 2023:1-31. doi:10.1080/00218464.2023.2223475
LibreCat | DOI
 
[205]
2023 | Journal Article | LibreCat-ID: 55760
Freund J, Lützenkirchen I, Löbbecke M, et al. Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints. Journal of Composites Science. 2023;7(10). doi:10.3390/jcs7100427
LibreCat | DOI
 
[204]
2023 | Journal Article | LibreCat-ID: 46495
Wu S, Delp A, Freund J, et al. Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process. The Journal of Adhesion. Published online 2023:1-29. doi:10.1080/00218464.2023.2245758
LibreCat | DOI
 
[203]
2023 | Conference Paper | LibreCat-ID: 48597
Wu S, Freund J, Delp A, et al. Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg. In: ; 2023.
LibreCat
 
[202]
2023 | Conference Abstract | LibreCat-ID: 49436
Kaiser MA, Reitz A, Konrad S, Meyer T, Marten T, Tröster T. Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess. In: Merklein M, ed. Workshop Warmblechumformung. Vol 18. Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung. Lehrstuhl für Fertigungstechnologie; 2023:99-118.
LibreCat
 
[201]
2023 | Conference Paper | LibreCat-ID: 50742 | OA
Bödger C, Gnaase S, Lehnert D, Tröster T. Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. In: Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. ; 2023.
LibreCat | Files available | Download (ext.)
 
[200]
2023 | Journal Article | LibreCat-ID: 37200
Gnaase S, Niggemeyer D, Lehnert D, Bödger C, Tröster T. Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. Crystals. 2023;13(2). doi:10.3390/cryst13020157
LibreCat | Files available | DOI
 
[199]
2022 | Newspaper Article | LibreCat-ID: 33001
Linnig C, Tröster T. Sauber recyceln- Innovative Verfahrenskombination mit Ultraschall ermöglicht sicheren Umgang mit recycelten Carbonfasern. CU reports. 2022.
LibreCat
 
[198]
2022 | Conference Abstract | LibreCat-ID: 37258
Haller S, Tinkloh SR, Tröster T, Brandt R. The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element. In: 5th International Conference Hybrid 2022 Material & Structures. ; 2022.
LibreCat
 
[197]
2022 | Conference Paper | LibreCat-ID: 32819
Pfeifer F, Tröster T, Marten T, Dietrich A, Nacke B, Grundmeier G. Investigation on hot sheet metal forming by means of a longitudinal flux inductor. In: Proceedings of the 6th International Conference on Steels in Cars and Trucks. ; 2022.
LibreCat
 
[196]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel D, Striewe JA, Grydin O, et al. Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications. Advanced Composite Materials. Published online 2022:1-16. doi:10.1080/09243046.2022.2143746
LibreCat | DOI
 
[195]
2022 | Journal Article | LibreCat-ID: 31496
Wu T, Kruse R, Tinkloh SR, et al. Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects. Journal of Composites Science. 2022;6(5). doi:10.3390/jcs6050138
LibreCat | DOI
 
[194]
2022 | Journal Article | LibreCat-ID: 34069
Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes. 2022;6. doi:10.1016/j.jajp.2022.100133
LibreCat | DOI
 
[193]
2022 | Journal Article | LibreCat-ID: 32814
Wu T, Degener S, Tinkloh SR, et al. Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction. Composite Structures. Published online 2022. doi:10.1016/j.compstruct.2022.116071
LibreCat | DOI
 
[192]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin S, Bielak CR, Bobbert M, Tröster T, Meschut G. Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. Published online 2022. doi:10.1007/s11740-021-01103-w
LibreCat | DOI | Download (ext.)
 
[191]
2022 | Journal Article | LibreCat-ID: 32813 | OA
Martin S, Kurtusic K, Tröster T. Influence of the Surrounding Sheet Geometry on a Clinched Joint. Key Engineering Materials. 2022;927. doi:  https://doi.org/10.4028/p-09md1c
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Journal Article | LibreCat-ID: 32869
Stallmeister T, Tröster T. In-Mold-Assembly of Hybrid Bending Structures by Compression Molding. Key Engineering Materials. 2022;926:1457-1467. doi:10.4028/p-5fxp53
LibreCat | DOI
 
[189]
2022 | Conference Abstract | LibreCat-ID: 32871
Triebus M, Ostermann M, Tröster T, Horwath I. Advanced Automotive Components by Fiber-Metal-Laminates. In: Materials in Car Body Engineering - Bad Nauheim. ; 2022.
LibreCat
 
[188]
2022 | Conference Abstract | LibreCat-ID: 32875
Ostermann M, Behm J, Marten T, et al. Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen nachhaltiger Mobilität. In: 14. Wissenschaftsforum Mobilität. ; 2022.
LibreCat
 
[187]
2022 | Journal Article | LibreCat-ID: 30510
Delp A, Freund J, Wu S, et al. Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties. Composite Structures. 2022;285. doi:10.1016/j.compstruct.2022.115238
LibreCat | DOI
 
[186]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus M, Reitz A, Grydin O, et al. Forming Simulation of Tailored Press Hardened Parts. In: 13th European LS-DYNA Conference 2021. ; 2021.
LibreCat | Download (ext.)
 
[185]
2021 | Book | LibreCat-ID: 28461
Tröster T, Pfeifer F, Nacke B, Dietrich A. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Vol P1038. Forschungsvereinigung Stahlanwendung e.V.; 2021.
LibreCat
 
[184]
2021 | Book (Editor) | LibreCat-ID: 26996
Koch R, Gräßler I, Zimmer D, Tröster T, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol 25. Shaker Verlag; 2021.
LibreCat
 
[183]
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh SR, Wu T, Tröster T, Niendorf T. Development of a submodel technique for FFT-based solvers in micromechanical analysis. In: ; 2021.
LibreCat
 
[182]
2021 | Conference Paper | LibreCat-ID: 20857
Camberg AA, Tröster T, Latuske C. Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing. In: Springer; 2021. doi:https://doi.org/10.1007/978-3-662-62924-6_28
LibreCat | DOI
 
[181]
2021 | Conference Paper | LibreCat-ID: 20858
Camberg AA, Tröster T, Wingenbach N, Hielscher C, Grenz J. A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design. In: Springer; 2021. doi:https://doi.org/10.1007/978-3-662-62924-6_30
LibreCat | DOI
 
[180]
2021 | Journal Article | LibreCat-ID: 22518 | OA
Triebus M, Gierse J, Marten T, Tröster T. A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions. IOP Conference Series: Materials Science and Engineering. Published online 2021. doi:10.1088/1757-899x/1157/1/012052
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 22859
Grothe R, Striewe JA, Meinderink D, Tröster T, Grundmeier G. Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films. The Journal of Adhesion. 2021. doi:10.1080/00218464.2021.1957676
LibreCat | DOI
 
[178]
2021 | Report | LibreCat-ID: 29807
Linnig C, Tröster T. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Deutsche Bundesstiftung Umwelt (DBU); 2021.
LibreCat
 
[177]
2021 | Journal Article | LibreCat-ID: 24131
Wu T, Tinkloh SR, Tröster T, Zinn W, Niendorf T. Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components. Metals. Published online 2021. doi:10.3390/met11020335
LibreCat | DOI
 
[176]
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh SR, Wu T, Tröster T, Niendorf T. The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis. Metals. Published online 2021. doi:10.3390/met11010156
LibreCat | DOI
 
[175]
2021 | Journal Article | LibreCat-ID: 24130
Magnier A, Wu T, Tinkloh SR, Tröster T, Scholtes B, Niendorf T. On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites. Polymer Testing. Published online 2021. doi:10.1016/j.polymertesting.2021.107146
LibreCat | DOI
 
[174]
2021 | Conference Abstract | LibreCat-ID: 21726 | OA
Triebus M, Tröster T. HyOpt - Optimization-Based Development of Hybrid Materials. In: 9th NRW Nano Conference - Innovations in Materials and Applications. ; 2021.
LibreCat | Download (ext.)
 
[173]
2021 | Journal Article | LibreCat-ID: 33895
Camberg AA, Erhart T, Tröster T. A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials. 2021;14(17). doi:10.3390/ma14175106
LibreCat | DOI
 
[172]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin S, Schütte J, Bäumler C, Sextro W, Tröster T. Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics. 2021;6. doi:10.1016/j.finmec.2021.100065
LibreCat | DOI | Download (ext.)
 
[171]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel W-G, Bobbert M, Böhme M, et al. Hybridprofile für Trag- und Crashstrukturen. In: Intrinsische Hybridverbunde Für Leichtbautragstrukturen. ; 2021. doi:10.1007/978-3-662-62833-1_3
LibreCat | DOI
 
[170]
2021 | Journal Article | LibreCat-ID: 23431
Cheng C, Wang Z, Jin Z, et al. Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure. Composites Part B: Engineering. 2021;224. doi:10.1016/j.compositesb.2021.109209
LibreCat | DOI
 
[169]
2021 | Journal Article | LibreCat-ID: 41508
Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. 2021;831. doi:10.1016/j.msea.2021.142312
LibreCat | DOI
 
[168]
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister T, Martin S, Marten T, Tröster T. Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. In: ; 2021.
LibreCat
 
[167]
2021 | Journal Article | LibreCat-ID: 24009
Camberg AA, Erhart T, Tröster T. A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials. Published online 2021. doi:10.3390/ma14175106
LibreCat | DOI
 
[166]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev A, Hoyer K-P, Dula D, et al. Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology. Published online 2021. doi:10.1016/j.jmatprotec.2021.117183
LibreCat | DOI
 
[165]
2021 | Journal Article | LibreCat-ID: 27700
Camberg AA, Andreiev A, Pramanik S, Hoyer K-P, Tröster T, Schaper M. Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.142312
LibreCat | DOI
 
[164]
2020 | Conference Paper | LibreCat-ID: 20843
Wu T, Tinkloh SR, Tröster T, Zinn W. Residual stress measurement in GFRP/steel hybrid components. In: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. ; 2020.
LibreCat
 
[163]
2020 | Conference Paper | LibreCat-ID: 20854 | OA
Camberg AA, Tröster T. A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter. 2020. doi:10.1088/1757-899X/967/1/012077
LibreCat | DOI | Download (ext.)
 
[162]
2020 | Conference Paper | LibreCat-ID: 20856 | OA
Camberg AA, Erhart T, Tröster T. Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework. In: ; 2020. doi:10.13140/RG.2.2.23924.17288
LibreCat | DOI | Download (ext.)
 
[161]
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer S, Akbulut Irmak EF, Tröster T. Wood-based materials as a sustainable alternative for future car body construction. In: Automotive Circle; 2020.
LibreCat
 
[160]
2020 | Conference Paper | LibreCat-ID: 16939 | OA
Triebus M, Tröster T. A Holistic Approach to Optimization-Based Design of Hybrid Materials. In: Proceedings 4th International Conference Hybrid Materials & Structures. ; 2020.
LibreCat | Download (ext.)
 
[159]
2020 | Conference Paper | LibreCat-ID: 15490 | OA
Claes L, Baumhögger E, Rüther T, Gierse J, Tröster T, Henning B. Reduction of systematic measurement deviation in acoustic absorption measurement systems. In: Fortschritte Der Akustik - DAGA 2020. ; 2020:1077-1080.
LibreCat | Files available
 
[158]
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh SR, Wu T, Tröster T, Niendorf T. Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids. In: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. ; 2020.
LibreCat
 
[157]
2020 | Journal Article | LibreCat-ID: 20842
Wu T, Tinkloh SR, Tröster T, Zinn W, Niendorf T. Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method. Journal of Composites Science. Published online 2020. doi:10.3390/jcs4030143
LibreCat | DOI
 
[156]
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar D, Stallmeister T, Wang Z, Tröster T. MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED. In: Hausmann JM, Siebert M, von Hehl A, Weidenmann KA, eds. Hybrid 2020 Materials and Structures. ; 2020:167-172.
LibreCat | Files available
 
[155]
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh SR, Wu T, Tröster T, Niendorf T. A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. Composite Structures. 2020;238. doi:10.1016/j.compstruct.2020.111926
LibreCat | DOI
 
[154]
2020 | Journal Article | LibreCat-ID: 58383
Basavapoornima Ch, Maheswari T, Chalicheemalapalli Jayasankar D, Kesavulu CR, Tröster T, Jayasankar CK. Thermal, structural, mechanical and 1.8 μm luminescence properties of the thulium doped Pb-K-Al-Na glasses for optical fiber amplifiers. Journal of Non-Crystalline Solids. 2020;530. doi:10.1016/j.jnoncrysol.2019.119773
LibreCat | DOI
 
[153]
2019 | Report | LibreCat-ID: 21210
Ahlers D, Tröster T. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn; 2019. doi:https://doi.org/10.2314/KXP:1695591887
LibreCat | DOI
 
[152]
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer F, Dietrich A, Marten T, Tröster T, Nacke B. Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process. In: Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel. ; 2019:585-593.
LibreCat
 
[151]
2019 | Conference Paper | LibreCat-ID: 16794
Striewe JA, Thomas R, Fischer F, Wiens T, Tröster T. Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung. In: Sankt Augustin: DGM-Inventum GmbH ; 2019.
LibreCat
 
[150]
2019 | Misc | LibreCat-ID: 16825
Ahlers D, Tröster T. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. Maastricht: EuroPM; 2019.
LibreCat
 
[149]
2019 | Conference Paper | LibreCat-ID: 16827
Camberg AA, Tröster T. Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks. In: 26. Sächsische Fachtagung Umformtechnik. ; 2019.
LibreCat
 
[148]
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh SR, Wu T, Tröster T, Niendorf T. A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures. In: ; 2019.
LibreCat
 
[147]
2019 | Journal Article | LibreCat-ID: 15875
Camberg AA, Tröster T, Bohner F, Tölle J. Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. IOP Conference Series: Materials Science and Engineering. 2019;651:012057. doi:10.1088/1757-899X/651/1/012057
LibreCat | DOI
 
[146]
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak EF, Tröster T. Fracture prediction of additively manufactured AlSi10Mg materials. Procedia Structural Integrity. 2019:190-197. doi:10.1016/j.prostr.2019.12.101
LibreCat | DOI
 
[145]
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak EF, Hanses J, Schweizer S, Tröster T. Modeling the Energy Absorption Characteristics of Wood Crash Elements. In: ; 2019.
LibreCat
 
[144]
2019 | Report | LibreCat-ID: 16029
Marten T, Tröster T. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH; 2019.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 16030
Triebus M, Bienia S, Marten T, Tröster T, Dröder K. Press Hardening Integrated Structuring for Hybrid Components. In: Verlag Wissenschaftliche Scripten; 2019.
LibreCat
 
[142]
2019 | Book Chapter | LibreCat-ID: 13436
Camberg AA, Stratmann I, Tröster T. TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In: Technologies for Economical and Functional Lightweight Design. Berlin, Heidelberg; 2019. doi:10.1007/978-3-662-58206-0_12
LibreCat | DOI
 
[141]
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister T, Chalicheemalapalli Jayasankar D, Wang Z, Tröster T. Self-sealing tool concept for RTM-processes. In: ; 2019.
LibreCat
 
[140]
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister T, Chalicheemalapalli Jayasankar D, Wang Z, Tröster T. Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. In: ; 2019.
LibreCat
 
[139]
2019 | Conference Paper | LibreCat-ID: 16027
Camberg AA, Striewe M, Tröster T, Bohner F, Tölle J. Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions. In: 5th MATFEM Conference. MATFEM; 2019.
LibreCat
 
[138]
2019 | Book | LibreCat-ID: 16795
Striewe JA, Tröster T, Kowatz J, Meschut G, Grothe R, Grundmeier G. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung; 2019.
LibreCat
 
[137]
2019 | Conference Paper | LibreCat-ID: 16028
Grothe R, Striewe JA, Kowatz J, Grundmeier G, Tröster T, Meschut G. Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. In: ; 2019.
LibreCat
 
[136]
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg AA, Tröster T, Sotirov N, Tölle J, Bohner F. Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions. In: Materials Science and Engineering (MSE) Congress 2018. Darmstadt; 2018.
LibreCat
 
[135]
2018 | Misc | LibreCat-ID: 6594
Claes L, Zeipert H, Koppa P, Tröster T, Henning B. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck; 2018.
LibreCat
 
[134]
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski N, Lian J, Camberg AA, et al. Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models. In: ; 2018. doi:10.1063/1.5035024
LibreCat | DOI
 
[133]
2018 | Conference Paper | LibreCat-ID: 16034
Camberg AA, Tröster T. Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche Gesellschaft für Materialkunde e.V.; 2018.
LibreCat
 
[132]
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers D, Tröster T. Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. In: ; 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 16040
Wang Z, Tröster T. Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. In: ; 2018.
LibreCat
 
[130]
2018 | Conference Paper | LibreCat-ID: 16042 | OA
Triebus M, Tröster T, Camberg AA, Bienia S, Dröder K. Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In: 15. Deutsches LS-Dyna Forum. ; 2018.
LibreCat | Download (ext.)
 
[129]
2018 | Conference Paper | LibreCat-ID: 16043 | OA
Camberg AA, Tröster T, Schneidt A, Sotirov N, Tölle J. The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In: 15. Deutsches LS-Dyna Forum. ; 2018.
LibreCat | Download (ext.)
 
[128]
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer S, Tröster T. Holz als Werkstoff im Automobil. In: ; 2018.
LibreCat
 
[127]
2018 | Conference Paper | LibreCat-ID: 16057
Wang Z, Tröster T. Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. In: ; 2018.
LibreCat
 
[126]
2018 | Journal Article | LibreCat-ID: 13439
Camberg AA, Bohner F, Tölle J, Schneidt A, Meiners S, Tröster T. Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models. IOP Conference Series: Materials Science and Engineering. 2018. doi:10.1088/1757-899x/418/1/012018
LibreCat | DOI
 
[125]
2018 | Conference Paper | LibreCat-ID: 16052
Horwath I, Dohmeier-Fischer S, Weiß-Borkowski N, Tröster T. FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING. In: INTED2018 Proceedings. ; 2018. doi:10.21125/inted.2018.1651
LibreCat | DOI
 
[124]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[123]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers D, Tröster T, Hermann S, et al. Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. In: Contributed Papers from MS&T17. ; 2018. doi:10.7449/2018mst/2018/mst_2018_117_124
LibreCat | DOI
 
[122]
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski N, Horwath I, Berscheid A, Dohmeier-Fischer S, Tröster T. NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH. In: INTED2018 Proceedings. ; 2018. doi:10.21125/inted.2018.1298
LibreCat | DOI
 
[121]
2018 | Conference Paper | LibreCat-ID: 16035
Striewe JA, Grothe R, Kowatz J, Tröster T, Grundmeier G, Meschut G. Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness. In: ; 2018.
LibreCat
 
[120]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg AA, Tröster T, Heggemann T, et al. LHYBS – Lightweight Design by Novel Hybrid Materials. In: ; 2018.
LibreCat
 
[119]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn C, Wang Z, Tröster T, Schaper M. Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM. In: ; 2018.
LibreCat
 
[118]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. Published online 2018:221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[117]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach F, Koppa P, Holzweissig MJ, et al. Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing. 2018;3(4):221-231. doi:10.1007/s40964-018-0044-4
LibreCat | DOI
 
[116]
2018 | Journal Article | LibreCat-ID: 15958
Zinn C, Bobbert M, Dammann C, et al. Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering. Published online 2018:173-185. doi:10.1016/j.compositesb.2018.05.030
LibreCat | DOI
 
[115]
2017 | Conference Paper | LibreCat-ID: 6559
Claes L, Zeipert H, Koppa P, Tröster T, Henning B. Additively manufactured acoustic diffuser structures for ultrasonic measurement applications. In: Proceedings of Meetings on Acoustics. Honolulu; 2017:030004. doi:10.1121/2.0000688
LibreCat | DOI
 
[114]
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating. In: ; 2017.
LibreCat
 
[113]
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Effects of Holes in Blanks for Press Hardening Process due to Induction Heating. In: ; 2017.
LibreCat
 
[112]
2017 | Journal Article | LibreCat-ID: 15941
Reuter C, Sauerland K-H, Tröster T. Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading. Composite Structures. 2017:33-44. doi:10.1016/j.compstruct.2017.04.052
LibreCat | DOI
 
[111]
2017 | Journal Article | LibreCat-ID: 15942
Reuter C, Tröster T. Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures. 2017;117:1-9. doi:10.1016/j.tws.2017.03.034
LibreCat | DOI
 
[110]
2017 | Journal Article | LibreCat-ID: 15944
Striewe JA, Reuter C, Sauerland K-H, Tröster T. Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures. 2017:501-508. doi:10.1016/j.tws.2017.11.011
LibreCat | DOI
 
[109]
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski N, Lian J, Marten T, Tröster T, Münstermann S, Bleck W. Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model. In: Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. ; 2017. doi:10.1063/1.5007961
LibreCat | DOI
 
[108]
2017 | Journal Article | LibreCat-ID: 16062
Schweizer S, Becker-Staines A, Tröster T. Separation of Hybrid Structures for the Reclaim of their Single Components. Key Engineering Materials. 2017:568-575. doi:10.4028/www.scientific.net/kem.742.568
LibreCat | DOI
 
[107]
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers D, Tröster T. Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. In: ; 2017.
LibreCat
 
[106]
2017 | Conference Paper | LibreCat-ID: 16065
Kutz P, Wang Z, Ellouz M, Kordisch T, Tröster T. Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. In: ; 2017.
LibreCat
 
[105]
2017 | Conference Paper | LibreCat-ID: 16071
Wang Z, Kutz P, Tröster T. Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. In: ; 2017.
LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. In: ; 2017.
LibreCat
 
[103]
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. In: ; 2017.
LibreCat
 
[102]
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In: ; 2017.
LibreCat
 
[101]
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung. In: ; 2017.
LibreCat
 
[100]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers D, Koppa P, Hengsbach F, et al. Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. In: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. ; 2017.
LibreCat
 
[99]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. Published online 2017:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat | DOI
 
[98]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach F, Koppa P, Duschik K, et al. Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design. 2017;133:136-142. doi:10.1016/j.matdes.2017.07.046
LibreCat | DOI
 
[97]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites. Published online 2017. doi:10.1504/ijautoc.2016.10005303
LibreCat | DOI
 
[96]
2016 | Journal Article | LibreCat-ID: 15962
Tröster T, Camberg AA, Sanitther B, Wang Z, Lauter C. Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology. International Journal of Automotive Composites. 2016;2:229-243. doi:10.1504/ijautoc.2016.10005304
LibreCat | DOI
 
[95]
2016 | Journal Article | LibreCat-ID: 16139
Schweizer S, Tröster T. Recyclingkonzepte für hybride Strukturen. Carbon Composites Magazin. 2016;(2):23.
LibreCat
 
[94]
2016 | Journal Article | LibreCat-ID: 16146
Grienitz V, Tröster T, Meiners S. Technikevaluation für die generative Fertigung eines Serien-Radträgers. ATZ - Automobiltechnische Zeitschrift. 2016:36-41. doi:10.1007/s35148-016-0090-5
LibreCat | DOI
 
[93]
2016 | Conference Paper | LibreCat-ID: 16264
Wang Z, Tröster T. Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren. In: ; 2016.
LibreCat
 
[92]
2016 | Conference Paper | LibreCat-ID: 16266
Striewe JA, Reuter C, Oberkönig C, Lauter C, Tröster T. Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe. In: ; 2016.
LibreCat
 
[91]
2016 | Conference Paper | LibreCat-ID: 16267
Striewe JA, Lauter C, Reuter C, Tröster T. Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites. In: ; 2016.
LibreCat
 
[90]
2016 | Conference Paper | LibreCat-ID: 16268
Striewe JA, Reuter C, Lauter C, Tröster T. Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures. In: ; 2016.
LibreCat
 
[89]
2016 | Conference Paper | LibreCat-ID: 16269
Wang Z, Lauter C, Löseke J, Tröster T. CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications. In: ; 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16270
Hickmann T, Ahlers D, Tröster T. Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer . 2016;(5).
LibreCat
 
[87]
2016 | Journal Article | LibreCat-ID: 16137
Lauter C, Reuter C, Wu S, Tröster T. Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering. 2016;10(5):875-880. doi:doi.org/10.5281/zenodo.1124481
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 15963
Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites. 2016;2:272-298. doi:10.1504/ijautoc.2016.10005305
LibreCat | DOI
 
[85]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. In: ; 2016.
LibreCat
 
[84]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn C, Bobbert M, Dammann C, et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. In: ; 2016.
LibreCat
 
[83]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert M, Augethaler F, Wang Z, Tröster T, Meschut G. Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications. Journal of Materials Science Research. Published online 2016. doi:10.5539/jmsr.v6n1p15
LibreCat | DOI
 
[82]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites. Published online 2016. doi:10.1504/ijautoc.2016.10005303
LibreCat | DOI
 
[81]
2016 | Journal Article | LibreCat-ID: 16141
Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites. Published online 2016. doi:10.1504/ijautoc.2016.10005305
LibreCat | DOI
 
[80]
2015 | Journal Article | LibreCat-ID: 15964
Leuders S, Vollmer M, Brenne F, Tröster T, Niendorf T. Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting. Metallurgical and Materials Transactions A. 2015:3816-3823. doi:10.1007/s11661-015-2864-x
LibreCat | DOI
 
[79]
2015 | Conference Paper | LibreCat-ID: 16131
Marten T, Block H, Tröster T. Partial hardening of new press hardenable steels. In: ; 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski N, Marten T, Block H, Tröster T. Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests. In: ; 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16135
Frantz M, Lauter C, Wang Z, Tröster T. Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK). In: Verlag Stahleisen GmbH; 2015:139-144.
LibreCat
 
[76]
2015 | Conference Paper | LibreCat-ID: 16136
Reuter C, Tröster T, Lauter C. Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna. In: Verlag Stahleisen GmbH; 2015:127-132.
LibreCat
 
[75]
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik W, Leuders S, Riemer A, Tröster T, Richard HA, Niendorf T. Fatigue life prediction for metals processed by Selective Laser Melting using finite element analyses. In: ; 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16259
Wang Z, Lauter C, Sanitther B, Frantz M, Tröster T. Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding. In: ; 2015.
LibreCat
 
[73]
2015 | Conference Paper | LibreCat-ID: 16260
Lauter C, Wang Z, Tröster T, Brandis R, Köchling D. Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design. In: ; 2015.
LibreCat
 
[72]
2015 | Conference Paper | LibreCat-ID: 16261
Leuders S, Meiners S, Taube A, Tröster T, Niendorf T. Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting. In: ; 2015.
LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach N, Tröster T. Material follows form follows function. In: ; 2015.
LibreCat
 
[70]
2015 | Conference Paper | LibreCat-ID: 16133
Lauter C, Wang Z, Koke I, Tröster T. Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology. In: ; 2015.
LibreCat
 
[69]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. In: ; 2015.
LibreCat
 
[68]
2015 | Conference Paper | LibreCat-ID: 23061
Lauter C, Wang Z, Koke I, Tröster T. Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology. In: 20th International Conference on Composite Materials, Copenhagen. ; 2015.
LibreCat
 
[67]
2014 | Journal Article | LibreCat-ID: 15966
Niendorf T, Leuders S, Riemer A, et al. Functionally Graded Alloys Obtained by Additive Manufacturing. Advanced Engineering Materials. 2014:857-861. doi:10.1002/adem.201300579
LibreCat | DOI
 
[66]
2014 | Journal Article | LibreCat-ID: 15967
Riemer A, Leuders S, Thöne M, Richard HA, Tröster T, Niendorf T. On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting. Engineering Fracture Mechanics. 2014:15-25. doi:10.1016/j.engfracmech.2014.03.008
LibreCat | DOI
 
[65]
2014 | Conference Paper | LibreCat-ID: 16097
Klein M, Hülsbusch D, Walther F, et al. Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids. In: ; 2014:188-193.
LibreCat
 
[64]
2014 | Conference Paper | LibreCat-ID: 16099
Frantz M, Lauter C, Tröster T, et al. Efficient manufacturing of hybrid structures consisting of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung. In: ; 2014.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16120
Block H, Marten T, Tröster T. Crash simulation of high strength automotive components using advanced failure models. In: ; 2014.
LibreCat
 
[62]
2014 | Journal Article | LibreCat-ID: 16122
Lauter C, Niewel J, Tröster T. Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications. International Journal of Automotive Composites. 2014. doi:10.1504/ijautoc.2014.064127
LibreCat | DOI
 
[61]
2014 | Conference Paper | LibreCat-ID: 16128
Block H, Marten T, Weiß Borkowski N, Tröster T. Crash performance of the new press hardenable steel 15MnB6. In: ; 2014.
LibreCat
 
[60]
2014 | Conference Paper | LibreCat-ID: 16129
Reuter C, Flore D, Pöhler S, Sauerland KH, Tröster T. Numerical simulation of the energy absorption of fiber-reinforced plastics. In: ; 2014.
LibreCat
 
[59]
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski N, Marten T, Tröster T. Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. In: ; 2014.
LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16255
Leuders S, Riemer A, Richard HA, Tröster T, Niendorf T. Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent defects on the initiation and propagation of fatigue cracks. In: ; 2014.
LibreCat
 
[57]
2014 | Conference Paper | LibreCat-ID: 16256
Leuders S, Tröster T, Brenne F, Riemer A, Richard HA, Niendorf T. Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting. In: ; 2014.
LibreCat
 
[56]
2014 | Conference Paper | LibreCat-ID: 16257
Leuders S, Tröster T, Riemer A, Richard HA, Niendorf T. On the mechanical performance of structures manufactured by selective laser melting: Damage initiation and propagation. In: ; 2014.
LibreCat
 
[55]
2014 | Journal Article | LibreCat-ID: 15965
Leuders S, Lieneke T, Lammers S, Tröster T, Niendorf T. On the fatigue properties of metals manufactured by selective laser melting – The role of ductility. Journal of Materials Research. Published online 2014:1911-1919. doi:10.1557/jmr.2014.157
LibreCat | DOI
 
[54]
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer E, Budde C, Tröster T, Pöhler S. Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic. In: ; 2014:101-108.
LibreCat
 
[53]
2014 | Journal Article | LibreCat-ID: 16125
Moritzer E, Budde C, Tröster T, Pöhler S. Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination. Joining Plastics . 2014;8(2):100-105.
LibreCat
 
[52]
2013 | Journal Article | LibreCat-ID: 15968
Niendorf T, Leuders S, Riemer A, Richard HA, Tröster T, Schwarze D. Highly Anisotropic Steel Processed by Selective Laser Melting. Metallurgical and Materials Transactions B. 2013:794-796. doi:10.1007/s11663-013-9875-z
LibreCat | DOI
 
[51]
2013 | Journal Article | LibreCat-ID: 16016
Riemer A, Leuders S, Richard HA, Tröster T. Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗. Materials Testing. 2013:537-543. doi:10.3139/120.110468
LibreCat | DOI
 
[50]
2013 | Conference Paper | LibreCat-ID: 16017
Marten T, Block H, Tröster T, Gerber T, Sikora S, Lenze F-J. Graded Lightweight Structures Through Hot Forming. In: ; 2013.
LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16018
Lauter C, Hochschulz T, Frantz M, Tröster T. Influences of Automotive Process Characteristics on Hybrid Structures. In: ; 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16019
Siewers B, Lauter C, Tröster T. Curing of fibre reinforced plastics by resistance heating of sheet metal in a hybrid structure. In: ; 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16020
Tröster T, Lauter C, Reuter C. Crashworthiness of Hybrid Structures. In: ; 2013.
LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16021
Siewers B, Lauter C, Tröster T. Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures. In: ; 2013.
LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16022
Lauter C, Krooß T, Tröster T. Manufacturing of Hybrid Structures by Prepreg Press Technology. In: ; 2013.
LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16023
Tröster T, Lauter C, Reuter C. Leichtbau mit Hybridstrukturen im Automobil. In: ; 2013.
LibreCat
 
[43]
2013 | Conference Paper | LibreCat-ID: 16024
Leuders S, Riemer A, Niendorf T, Richard HA, Tröster T. On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects. In: ; 2013.
LibreCat
 
[42]
2013 | Conference Paper | LibreCat-ID: 16025
Marten T, Block H, Tröster T. Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess. In: ; 2013.
LibreCat
 
[41]
2013 | Conference Paper | LibreCat-ID: 16026
Riemer A, Leuders S, Richard HA, Tröster T. Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen. In: ; 2013.
LibreCat
 
[40]
2013 | Book Chapter | LibreCat-ID: 16096
Lauter C, Tröster T, Reuter C. Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications. In: Advanced Composite Materials for Automotive Applications. Chichester, UK; 2013. doi:10.1002/9781118535288.ch7
LibreCat | DOI
 
[39]
2012 | Journal Article | LibreCat-ID: 15981
Tröster T, Marten T, Thomas D, Block H, Lauter C, Thöne M. Automobilleichtbau mit innovativen Werkstoffen und Prozessen. Forschungsforum Paderborn. 2012;15(15/2012):30-38.
LibreCat
 
[38]
2012 | Journal Article | LibreCat-ID: 15983
Lauter C, Werneke S, Siewers B, Tröster T. Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. Lightweight Design. 2012:53-58. doi:10.1365/s35725-012-0079-2
LibreCat | DOI
 
[37]
2012 | Conference Paper | LibreCat-ID: 15985
Reuter C, Frantz M, Lauter C, Block H, Tröster T. Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. In: ; 2012.
LibreCat
 
[36]
2012 | Conference Paper | LibreCat-ID: 15987
Lauter C, Frantz M, Kohler JP, Tröster T. Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.
LibreCat
 
[35]
2012 | Conference Paper | LibreCat-ID: 15988
Lauter C, Sarrazin M, Tröster T. Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. In: ; 2012.
LibreCat
 
[34]
2012 | Journal Article | LibreCat-ID: 15989
Ickert L, Thomas D, Tröster T, Eckstein L. Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. FAT-Schriftenreihe 244. 2012;(244).
LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16004
Lauter C, Siewers B, Zanft B, Tröster T. Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.
LibreCat
 
[32]
2012 | Conference Paper | LibreCat-ID: 16007
Thöne M, Leuders S, Riemer A, Tröster T, Richard HA. Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. In: ; 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16008
Riemer A, Leuders S, Tröster T, Richard HA. Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit. 2012.
LibreCat
 
[30]
2012 | Conference Paper | LibreCat-ID: 16009
Leuders S, Riemer A, Tröster T, Richard HA. Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. In: ; 2012.
LibreCat
 
[29]
2012 | Report | LibreCat-ID: 16012
Tröster T, Marten T, Adelbert S, Kadim A. P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH; 2012.
LibreCat
 
[28]
2012 | Journal Article | LibreCat-ID: 16015
Leuders S, Thöne M, Riemer A, et al. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue. 2012:300-307. doi:10.1016/j.ijfatigue.2012.11.011
LibreCat | DOI
 
[27]
2012 | Journal Article | LibreCat-ID: 15984
Schmidt HC, Damerow U, Lauter C, et al. Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements. Key Engineering Materials. Published online 2012:295-300. doi:10.4028/www.scientific.net/kem.504-506.295
LibreCat | DOI
 
[26]
2012 | Conference Paper | LibreCat-ID: 15986
Gorny B, Hankeln F, Lauter C, et al. Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs. In: ; 2012.
LibreCat
 
[25]
2012 | Journal Article | LibreCat-ID: 16010
Lauter C, Tröster T, Brandis R, Gausemeier J. Methodik für die Produktentstehung hybrider Leichtbaustrukturen. Lightweight Design. 2012;5:50-56. doi:10.1365/s35725-013-0137-4
LibreCat | DOI
 
[24]
2011 | Journal Article | LibreCat-ID: 15969
Lauter C, Sarrazin M, Tröster T. Multimaterialsysteme höchstfest verbunden. Adhäsion – Kleben und Dichten. 2011;3/2011:39-43.
LibreCat
 
[23]
2011 | Conference Paper | LibreCat-ID: 15971
Frantz M, Stübbe O, Lauter C, Schrange J, Tröster T. Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. In: ; 2011.
LibreCat
 
[22]
2011 | Conference Paper | LibreCat-ID: 15972
Thomas D, Block H, Tröster T, Krogmeier J. Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. In: ; 2011.
LibreCat
 
[21]
2011 | Journal Article | LibreCat-ID: 15974
Marten T, Lauter C, Tröster T. Automobilleichtbau durch höchstfeste Multimaterialsysteme. Ingenieurspiegel. 2011;2/2011:67-69.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 15975
Lauter C, Thomas D, Frantz M, Niewel J, Tröster T. Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte. 2011;2:6-7.
LibreCat
 
[19]
2011 | Journal Article | LibreCat-ID: 15980
Lauter C, Frantz M, Siewers B, Tröster T. Hybrid structures for tailored structural automotive components. JEC Composites Magazine. 2011;69:35-37.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15990
Thomas D, Block H, Tröster T. Production of load-adapted lightweight designs by partial hardening. In: ; 2011.
LibreCat
 
[17]
2011 | Journal Article | LibreCat-ID: 15992
Gorny B, Niendorf T, Lackmann J, Thoene M, Tröster T, Maier HJ. In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Materials Science and Engineering: A. 2011;528(27):7962-7967. doi:10.1016/j.msea.2011.07.026
LibreCat | DOI
 
[16]
2011 | Journal Article | LibreCat-ID: 15993
Lauter C, Frantz M, Tröster T. Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen. Lightweight Design. 2011;4:48-54.
LibreCat
 
[15]
2011 | Conference Paper | LibreCat-ID: 15996
Frantz M, Lauter C, Tröster T. Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP. In: ; 2011.
LibreCat
 
[14]
2011 | Journal Article | LibreCat-ID: 15997
Lauter C, Frantz M, Marten T, Tröster T, Bach G, Seliger G. Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe. 2011;(09/2011).
LibreCat
 
[13]
2011 | Journal Article | LibreCat-ID: 15998
Frantz M, Lauter C, Tröster T. Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe. 2011;(10/2011).
LibreCat
 
[12]
2011 | Conference Paper | LibreCat-ID: 15999
Marten T, Tröster T, Adelbert S, Kadim A. Fluidized bed heating of blanks for the hot forming process. In: ; 2011.
LibreCat
 
[11]
2011 | Conference Paper | LibreCat-ID: 16002
Tröster T, Lauter C. Hybridstrukturen für den automobilen Leichtbau. In: ; 2011.
LibreCat
 
[10]
2011 | Journal Article | LibreCat-ID: 16013
Lauter C, Frantz M, Tröster T. Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen. Lightweight Design. 2011;4:48-54. doi:10.1365/s35725-011-0044-5
LibreCat | DOI
 
[9]
2011 | Journal Article | LibreCat-ID: 16000
Marten T, Niewel J, Tröster T. Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess. HTM Journal of Heat Treatment and Materials. Published online 2011:309-315. doi:10.3139/105.110119
LibreCat | DOI
 
[8]
2011 | Conference Paper | LibreCat-ID: 15970
Lauter C, Damerow U, Frantz M, Tröster T, Homberg W. Produktionsverfahren zur Herstellung höchstfester hybrider Leichtbaustrukturen für den Einsatz im Automobil. In: ; 2011.
LibreCat
 
[7]
2011 | Conference Paper | LibreCat-ID: 15991
Lauter C, Dau J, Tröster T, Homberg W. Manufacturing processes for automotive structures in multi-material design consisting of sheet metal and CFRP prepregs. In: ; 2011.
LibreCat
 
[6]
2011 | Conference Paper | LibreCat-ID: 15994
Dau J, Lauter C, Damerow U, Homberg W, Tröster T. Multi-material systems for tailored automotive structural components. In: ; 2011.
LibreCat
 
[5]
2009 | Journal Article | LibreCat-ID: 15953
Böke J, Erhardt R, Rostek W, Tröster T. Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau*. Materials Testing. 2009:22-27. doi:10.3139/120.110002
LibreCat | DOI
 
[4]
2008 | Conference Paper | LibreCat-ID: 15954
Tröster T, Howe C, Müller M, Rostek W. Development status and market potential of hot formed ballistic steels. In: ; 2008.
LibreCat
 
[3]
2008 | Conference Paper | LibreCat-ID: 33878
Tröster T, Rostek W, Böke J, Erhardt R. Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau. In: DVM, ed. Ein wesentlicher Beitrag zur Klimadebatte. Vol 675. DVM-Bericht. ; 2008.
LibreCat
 
[2]
2007 | Book | LibreCat-ID: 33880
Tröster T, Berg J. Ermittlung dynamischer Grenzformänderungsdiagramme für Karosseriestähle. Vol P727. Verlag- und Vertriebsgesellschaft Düsseldorf; 2007.
LibreCat
 
[1]
2004 | Conference Paper | LibreCat-ID: 33881
Tröster T, Rostek W. Innovative Warmumformung. In: Tröster T, Rostek W, eds. Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung” in Fellbach. Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung.” ; 2004:51-66.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed