150 Publications

Mark all

[150]
2020 | Conference Paper | LibreCat-ID: 16930
Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[149]
2020 | Journal Article | LibreCat-ID: 15945
A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, Composite Structures 238 (2020).
LibreCat | DOI
 
[148]
2020 | Conference Paper | LibreCat-ID: 15490
Reduction of systematic measurement deviation in acoustic absorption measurement systems
L. Claes, E. Baumhögger, T. Rüther, Jan Gierse, T. Tröster, B. Henning, in: Fortschritte Der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat | Files available
 
[147]
2020 | Conference Paper | LibreCat-ID: 16939
A Holistic Approach to Optimization-Based Design of Hybrid Materials
M. Triebus, T. Tröster, in: Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
LibreCat
 
[146]
2019 | Book Chapter | LibreCat-ID: 13436
TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES
A.A. Camberg, I. Stratmann, T. Tröster, in: Technologies for Economical and Functional Lightweight Design, Berlin, Heidelberg, 2019.
LibreCat | DOI
 
[145]
2019 | Report | LibreCat-ID: 16029
Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess
T. Marten, T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess, Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2019.
LibreCat
 
[144]
2019 | Conference Paper | LibreCat-ID: 16031 LibreCat
 
[143]
2019 | Book | LibreCat-ID: 16795
Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK
J.A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, G. Grundmeier, Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK, Europäische Forschungsgesellschaft für Blechverarbeitung, Hannover, 2019.
LibreCat
 
[142]
2019 | Conference Paper | LibreCat-ID: 16827 LibreCat
 
[141]
2019 | Journal Article | LibreCat-ID: 15875
Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications
A.A. Camberg, T. Tröster, F. Bohner, J. Tölle, IOP Conference Series: Materials Science and Engineering 651 (2019) 012057.
LibreCat | DOI
 
[140]
2019 | Conference Paper | LibreCat-ID: 15976
Modeling the Energy Absorption Characteristics of Wood Crash Elements
E.F. Akbulut Irmak, J. Hanses, S. Schweizer, T. Tröster, in: 2019.
LibreCat
 
[139]
2019 | Conference Paper | LibreCat-ID: 16032
Self-sealing tool concept for RTM-processes
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.
LibreCat
 
[138]
2019 | Conference Paper | LibreCat-ID: 16033
Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.
LibreCat
 
[137]
2019 | Conference Paper | LibreCat-ID: 16831 LibreCat
 
[136]
2019 | Conference Paper | LibreCat-ID: 16027
Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions
A.A. Camberg, M. Striewe, T. Tröster, F. Bohner, J. Tölle, in: 5th MATFEM Conference, MATFEM, München, 2019.
LibreCat
 
[135]
2019 | Conference Paper | LibreCat-ID: 16793
Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process
F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, B. Nacke, in: Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 2019, pp. 585–593.
LibreCat
 
[134]
2019 | Misc | LibreCat-ID: 16825
Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V
D. Ahlers, T. Tröster, Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V, EuroPM, Maastricht, 2019.
LibreCat
 
[133]
2019 | Journal Article | LibreCat-ID: 15950
Fracture prediction of additively manufactured AlSi10Mg materials
E.F. Akbulut Irmak, T. Tröster, Procedia Structural Integrity (2019) 190–197.
LibreCat | DOI
 
[132]
2019 | Conference Paper | LibreCat-ID: 16028
Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK
R. Grothe, J.A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, G. Meschut, in: 2019.
LibreCat
 
[131]
2019 | Conference Paper | LibreCat-ID: 16030
Press Hardening Integrated Structuring for Hybrid Components
M. Triebus, S. Bienia, T. Marten, T. Tröster, K. Dröder, in: Verlag Wissenschaftliche Scripten, 2019.
LibreCat
 
[130]
2019 | Conference Paper | LibreCat-ID: 16794
Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung
J.A. Striewe, R. Thomas, F. Fischer, T. Wiens, T. Tröster, in: DGM-Inventum GmbH , Sankt Augustin, 2019.
LibreCat
 
[129]
2018 | Conference Paper | LibreCat-ID: 16055 LibreCat
 
[128]
2018 | Conference Paper | LibreCat-ID: 16043 LibreCat | Download (ext.)
 
[127]
2018 | Conference Paper | LibreCat-ID: 16048
Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing
D. Ahlers, T. Tröster, S. Hermann, P. Koppa, P. Gloetter, M. Schaper, M. Peters, M. Burns, F. Hengsbach, A. Altmann, in: Contributed Papers from MS&T17, 2018.
LibreCat | DOI
 
[126]
2018 | Conference Paper | LibreCat-ID: 16050
LHYBS – Lightweight Design by Novel Hybrid Materials
A.A. Camberg, T. Tröster, T. Heggemann, H. Homberg, M. Schaper, J. Dietrich, W. Bremser, L. Achterberg, M. Kabst, M. Wille, V. Peckhaus, in: 2018.
LibreCat
 
[125]
2018 | Conference Paper | LibreCat-ID: 16056
Holz als Werkstoff im Automobil
S. Schweizer, T. Tröster, in: 2018.
LibreCat
 
[124]
2018 | Journal Article | LibreCat-ID: 15957
Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.
LibreCat | DOI
 
[123]
2018 | Journal Article | LibreCat-ID: 15958
Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, T. Tröster, R. Mahnken, G. Meschut, M. Schaper, Composites Part B: Engineering (2018) 173–185.
LibreCat | DOI
 
[122]
2018 | Conference Paper | LibreCat-ID: 15960
Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models
N. Weiß-Borkowski, J. Lian, A.A. Camberg, T. Tröster, S. Münstermann, W. Bleck, H. Gese, H. Richter, in: 2018.
LibreCat | DOI
 
 
[120]
2018 | Conference Paper | LibreCat-ID: 16052
FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING
I. Horwath, S. Dohmeier-Fischer, N. Weiß-Borkowski, T. Tröster, in: INTED2018 Proceedings, 2018.
LibreCat | DOI
 
[119]
2018 | Conference Paper | LibreCat-ID: 16057 LibreCat
 
[118]
2018 | Journal Article | LibreCat-ID: 13439
Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models
A.A. Camberg, F. Bohner, J. Tölle, A. Schneidt, S. Meiners, T. Tröster, IOP Conference Series: Materials Science and Engineering (2018).
LibreCat | DOI
 
[117]
2018 | Conference Paper | LibreCat-ID: 16034
Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures
A.A. Camberg, T. Tröster, in: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat
 
[116]
 
[115]
2018 | Conference Paper | LibreCat-ID: 16035
Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness
J.A. Striewe, R. Grothe, J. Kowatz, T. Tröster, G. Grundmeier, G. Meschut, in: 2018.
LibreCat
 
[114]
2018 | Conference Paper | LibreCat-ID: 16042
Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures
M. Triebus, T. Tröster, A.A. Camberg, S. Bienia, K. Dröder, in: 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[113]
2018 | Conference Paper | LibreCat-ID: 16054
NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH
N. Weiß-Borkowski, I. Horwath, A. Berscheid, S. Dohmeier-Fischer, T. Tröster, in: INTED2018 Proceedings, 2018.
LibreCat | DOI
 
[112]
2017 | Journal Article | LibreCat-ID: 16062
Separation of Hybrid Structures for the Reclaim of their Single Components
S. Schweizer, A. Becker-Staines, T. Tröster, Key Engineering Materials (2017) 568–575.
LibreCat | DOI
 
[111]
2017 | Conference Paper | LibreCat-ID: 16074
Materialkombinationen in der additive Fertigung
D. Ahlers, T. Tröster, in: 2017.
LibreCat
 
[110]
2017 | Journal Article | LibreCat-ID: 15944
Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites
J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures (2017) 501–508.
LibreCat | DOI
 
[109]
2017 | Conference Paper | LibreCat-ID: 16063 LibreCat
 
[108]
2017 | Conference Paper | LibreCat-ID: 16075 LibreCat
 
[107]
2017 | Conference Paper | LibreCat-ID: 16791 LibreCat
 
[106]
2017 | Journal Article | LibreCat-ID: 15941
Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading
C. Reuter, K.-H. Sauerland, T. Tröster, Composite Structures (2017) 33–44.
LibreCat | DOI
 
[105]
2017 | Conference Paper | LibreCat-ID: 16071 LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16792
Effects of Holes in Blanks for Press Hardening Process due to Induction Heating
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.
LibreCat
 
[103]
2017 | Journal Article | LibreCat-ID: 15961
Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017).
LibreCat | DOI
 
[102]
2017 | Conference Paper | LibreCat-ID: 16065
Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.
LibreCat
 
[101]
2017 | Conference Paper | LibreCat-ID: 16072 LibreCat
 
[100]
2017 | Journal Article | LibreCat-ID: 15942
Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact
C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
LibreCat | DOI
 
[99]
2017 | Conference Paper | LibreCat-ID: 16059
Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model
N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck, in: Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.
LibreCat | DOI
 
[98]
2017 | Conference Paper | LibreCat-ID: 16066
Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing
D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[97]
2017 | Conference Paper | LibreCat-ID: 16073
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates
N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.
LibreCat
 
[96]
2016 | Conference Paper | LibreCat-ID: 16264 LibreCat
 
[95]
2016 | Conference Paper | LibreCat-ID: 16269
CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications
Z. Wang, C. Lauter, J. Löseke, T. Tröster, in: 2016.
LibreCat
 
[94]
2016 | Journal Article | LibreCat-ID: 16137
Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology
C. Lauter, C. Reuter, S. Wu, T. Tröster, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 10 (2016) 875–880.
LibreCat
 
[93]
2016 | Journal Article | LibreCat-ID: 15963
Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites 2 (2016) 272–298.
LibreCat | DOI
 
[92]
2016 | Conference Paper | LibreCat-ID: 16265
Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, M. Schaper, G. Meschut, R. Mahnken, T. Tröster, in: 2016.
LibreCat
 
[91]
2016 | Conference Paper | LibreCat-ID: 16138
Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, M. Schaper, T. Tröster, in: 2016.
LibreCat
 
[90]
2016 | Journal Article | LibreCat-ID: 16140
Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, G. Meschut, Journal of Materials Science Research (2016).
LibreCat | DOI
 
[89]
2016 | Conference Paper | LibreCat-ID: 16266
Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe
J.A. Striewe, C. Reuter, C. Oberkönig, C. Lauter, T. Tröster, in: 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16139
Recyclingkonzepte für hybride Strukturen
S. Schweizer, T. Tröster, Carbon Composites Magazin (2016) 23.
LibreCat
 
[87]
2016 | Journal Article | LibreCat-ID: 16141
Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites (2016).
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 16146
Technikevaluation für die generative Fertigung eines Serien-Radträgers
V. Grienitz, T. Tröster, S. Meiners, ATZ - Automobiltechnische Zeitschrift (2016) 36–41.
LibreCat | DOI
 
[85]
2016 | Conference Paper | LibreCat-ID: 16267
Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites
J.A. Striewe, C. Lauter, C. Reuter, T. Tröster, in: 2016.
LibreCat
 
[84]
2016 | Conference Paper | LibreCat-ID: 16268
Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures
J.A. Striewe, C. Reuter, C. Lauter, T. Tröster, in: 2016.
LibreCat
 
[83]
2016 | Journal Article | LibreCat-ID: 16270
Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten
T. Hickmann, D. Ahlers, T. Tröster, Der Stahlformenbauer (2016).
LibreCat
 
[82]
2016 | Journal Article | LibreCat-ID: 16143
Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2016).
LibreCat | DOI
 
[81]
2016 | Journal Article | LibreCat-ID: 15962
Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology
T. Tröster, A.A. Camberg, B. Sanitther, Z. Wang, C. Lauter, International Journal of Automotive Composites 2 (2016) 229–243.
LibreCat | DOI
 
[80]
2015 | Conference Paper | LibreCat-ID: 16132
Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests
N. Weiß Borkowski, T. Marten, H. Block, T. Tröster, in: 2015.
LibreCat
 
[79]
2015 | Conference Paper | LibreCat-ID: 16258
Fatigue life prediction for metals processed by Selective Laser Melting using finite element analyses
W. Reschetnik, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, T. Niendorf, in: 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16260
Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design
C. Lauter, Z. Wang, T. Tröster, R. Brandis, D. Köchling, in: 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16133 LibreCat
 
[76]
2015 | Journal Article | LibreCat-ID: 15964
Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
S. Leuders, M. Vollmer, F. Brenne, T. Tröster, T. Niendorf, Metallurgical and Materials Transactions A (2015) 3816–3823.
LibreCat | DOI
 
[75]
2015 | Conference Paper | LibreCat-ID: 16259
Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding
Z. Wang, C. Lauter, B. Sanitther, M. Frantz, T. Tröster, in: 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16261
Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting
S. Leuders, S. Meiners, A. Taube, T. Tröster, T. Niendorf, in: 2015.
LibreCat
 
[73]
2015 | Book Chapter | LibreCat-ID: 16134
Textile composites in the automotive industry
P. Abel, C. Lauter, T. Gries, T. Tröster, in: Fatigue of Textile Composites, 2015.
LibreCat | DOI
 
[72]
2015 | Conference Paper | LibreCat-ID: 16262 LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 16135
Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK)
M. Frantz, C. Lauter, Z. Wang, T. Tröster, in: Verlag Stahleisen GmbH, 2015, pp. 139–144.
LibreCat
 
[70]
2015 | Conference Paper | LibreCat-ID: 16263
Material follows form follows function
N. Wingenbach, T. Tröster, in: 2015.
LibreCat
 
[69]
2015 | Conference Paper | LibreCat-ID: 16131
Partial hardening of new press hardenable steels
T. Marten, H. Block, T. Tröster, in: 2015.
LibreCat
 
[68]
2015 | Conference Paper | LibreCat-ID: 16136
Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna
C. Reuter, T. Tröster, C. Lauter, in: Verlag Stahleisen GmbH, 2015, pp. 127–132.
LibreCat
 
[67]
2014 | Conference Paper | LibreCat-ID: 16257 LibreCat
 
[66]
2014 | Conference Paper | LibreCat-ID: 16098
Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic
E. Moritzer, C. Budde, T. Tröster, S. Pöhler, in: 2014, pp. 101–108.
LibreCat
 
[65]
2014 | Conference Paper | LibreCat-ID: 16120 LibreCat
 
[64]
2014 | Journal Article | LibreCat-ID: 16125
Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination
E. Moritzer, C. Budde, T. Tröster, S. Pöhler, Joining Plastics 8 (2014) 100–105.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16099 LibreCat
 
[62]
2014 | Journal Article | LibreCat-ID: 15965
On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials Research (2014) 1911–1919.
LibreCat | DOI
 
[61]
2014 | Journal Article | LibreCat-ID: 16122
Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications
C. Lauter, J. Niewel, T. Tröster, International Journal of Automotive Composites (2014).
LibreCat | DOI
 
[60]
2014 | Journal Article | LibreCat-ID: 15966
Functionally Graded Alloys Obtained by Additive Manufacturing
T. Niendorf, S. Leuders, A. Riemer, F. Brenne, T. Tröster, H.A. Richard, D. Schwarze, Advanced Engineering Materials (2014) 857–861.
LibreCat | DOI
 
[59]
2014 | Conference Paper | LibreCat-ID: 16255 LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16128
Crash performance of the new press hardenable steel 15MnB6
H. Block, T. Marten, N. Weiß Borkowski, T. Tröster, in: 2014.
LibreCat
 
[57]
2014 | Conference Paper | LibreCat-ID: 16130 LibreCat
 
[56]
2014 | Conference Paper | LibreCat-ID: 16256
Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting
S. Leuders, T. Tröster, F. Brenne, A. Riemer, H.A. Richard, T. Niendorf, in: 2014.
LibreCat
 
[55]
2014 | Conference Paper | LibreCat-ID: 16097
Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids
M. Klein, D. Hülsbusch, F. Walther, M. Bartsch, J. Hausmann, M. Frantz, C. Lauter, T. Tröster, in: 2014, pp. 188–193.
LibreCat
 
[54]
2014 | Conference Paper | LibreCat-ID: 16129
Numerical simulation of the energy absorption of fiber-reinforced plastics
C. Reuter, D. Flore, S. Pöhler, K.H. Sauerland, T. Tröster, in: 2014.
LibreCat
 
[53]
2014 | Journal Article | LibreCat-ID: 15967
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
A. Riemer, S. Leuders, M. Thöne, H.A. Richard, T. Tröster, T. Niendorf, Engineering Fracture Mechanics (2014) 15–25.
LibreCat | DOI
 
[52]
2013 | Journal Article | LibreCat-ID: 15968
Highly Anisotropic Steel Processed by Selective Laser Melting
T. Niendorf, S. Leuders, A. Riemer, H.A. Richard, T. Tröster, D. Schwarze, Metallurgical and Materials Transactions B (2013) 794–796.
LibreCat | DOI
 
[51]
2013 | Conference Paper | LibreCat-ID: 16017
Graded Lightweight Structures Through Hot Forming
T. Marten, H. Block, T. Tröster, T. Gerber, S. Sikora, F.-J. Lenze, in: 2013.
LibreCat
 
[50]
2013 | Conference Paper | LibreCat-ID: 16024 LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16018
Influences of Automotive Process Characteristics on Hybrid Structures
C. Lauter, T. Hochschulz, M. Frantz, T. Tröster, in: 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16020
Crashworthiness of Hybrid Structures
T. Tröster, C. Lauter, C. Reuter, in: 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16025 LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16019 LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16021 LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16026 LibreCat
 
[43]
2013 | Conference Paper | LibreCat-ID: 16022
Manufacturing of Hybrid Structures by Prepreg Press Technology
C. Lauter, T. Krooß, T. Tröster, in: 2013.
LibreCat
 
[42]
2013 | Book Chapter | LibreCat-ID: 16096
Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications
C. Lauter, T. Tröster, C. Reuter, in: Advanced Composite Materials for Automotive Applications, Chichester, UK, 2013.
LibreCat | DOI
 
[41]
2013 | Journal Article | LibreCat-ID: 16016
Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗
A. Riemer, S. Leuders, H.A. Richard, T. Tröster, Materials Testing (2013) 537–543.
LibreCat | DOI
 
[40]
2013 | Conference Paper | LibreCat-ID: 16023
Leichtbau mit Hybridstrukturen im Automobil
T. Tröster, C. Lauter, C. Reuter, in: 2013.
LibreCat
 
[39]
2012 | Conference Paper | LibreCat-ID: 15987
Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements
C. Lauter, M. Frantz, J.P. Kohler, T. Tröster, in: 2012.
LibreCat
 
[38]
2012 | Report | LibreCat-ID: 16012
P 850 – Wirbelbetterwärmung von Platinen für das Presshärten
T. Tröster, T. Marten, S. Adelbert, A. Kadim, P 850 – Wirbelbetterwärmung von Platinen für das Presshärten, Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2012.
LibreCat
 
[37]
2012 | Journal Article | LibreCat-ID: 15983
Endkonturennahe Fertigung von höchstfesten Hybridbauteilen
C. Lauter, S. Werneke, B. Siewers, T. Tröster, Lightweight Design (2012) 53–58.
LibreCat | DOI
 
[36]
2012 | Conference Paper | LibreCat-ID: 15988 LibreCat
 
[35]
2012 | Journal Article | LibreCat-ID: 15984
Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements
H.C. Schmidt, U. Damerow, C. Lauter, B. Gorny, F. Hankeln, W. Homberg, T. Tröster, H.J. Maier, R. Mahnken, Key Engineering Materials (2012) 295–300.
LibreCat | DOI
 
[34]
2012 | Journal Article | LibreCat-ID: 15989 LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16007
Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V
M. Thöne, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.
LibreCat
 
[32]
2012 | Conference Paper | LibreCat-ID: 15985
Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP
C. Reuter, M. Frantz, C. Lauter, H. Block, T. Tröster, in: 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16008
Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4
A. Riemer, S. Leuders, T. Tröster, H.A. Richard, DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit (2012).
LibreCat
 
[30]
2012 | Journal Article | LibreCat-ID: 16010
Methodik für die Produktentstehung hybrider Leichtbaustrukturen
C. Lauter, T. Tröster, R. Brandis, J. Gausemeier, Lightweight Design 5 (2012) 50–56.
LibreCat | DOI
 
[29]
2012 | Journal Article | LibreCat-ID: 16015
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
S. Leuders, M. Thöne, A. Riemer, T. Niendorf, T. Tröster, H.A. Richard, H.J. Maier, International Journal of Fatigue (2012) 300–307.
LibreCat | DOI
 
[28]
2012 | Journal Article | LibreCat-ID: 15981
Automobilleichtbau mit innovativen Werkstoffen und Prozessen
T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, M. Thöne, Forschungsforum Paderborn 15 (2012) 30–38.
LibreCat
 
[27]
2012 | Conference Paper | LibreCat-ID: 15986
Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs
B. Gorny, F. Hankeln, C. Lauter, H.C. Schmidt, U. Damerow, R. Mahnken, H.J. Maier, T. Tröster, W. Homberg, in: 2012.
LibreCat
 
[26]
2012 | Conference Paper | LibreCat-ID: 16004 LibreCat
 
[25]
2012 | Conference Paper | LibreCat-ID: 16009 LibreCat
 
[24]
2011 | Conference Paper | LibreCat-ID: 15970 LibreCat
 
[23]
2011 | Journal Article | LibreCat-ID: 15975
Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen
C. Lauter, D. Thomas, M. Frantz, J. Niewel, T. Tröster, Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte 2 (2011) 6–7.
LibreCat
 
[22]
2011 | Conference Paper | LibreCat-ID: 15994
Multi-material systems for tailored automotive structural components
J. Dau, C. Lauter, U. Damerow, W. Homberg, T. Tröster, in: 2011.
LibreCat
 
[21]
2011 | Conference Paper | LibreCat-ID: 15999
Fluidized bed heating of blanks for the hot forming process
T. Marten, T. Tröster, S. Adelbert, A. Kadim, in: 2011.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 16000
Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess
T. Marten, J. Niewel, T. Tröster, HTM Journal of Heat Treatment and Materials (2011) 309–315.
LibreCat | DOI
 
[19]
2011 | Journal Article | LibreCat-ID: 15969
Multimaterialsysteme höchstfest verbunden
C. Lauter, M. Sarrazin, T. Tröster, Adhäsion – Kleben und Dichten 3/2011 (2011) 39–43.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15971 LibreCat
 
[17]
2011 | Conference Paper | LibreCat-ID: 15990
Production of load-adapted lightweight designs by partial hardening
D. Thomas, H. Block, T. Tröster, in: 2011.
LibreCat
 
[16]
2011 | Conference Paper | LibreCat-ID: 15995
Multi-material systems. High strength steels and fiber-reinforced plastics
C. Lauter, B. Sköck-Hartmann, T. Gries, T. Tröster, M. Linke, in: 2011.
LibreCat
 
[15]
2011 | Journal Article | LibreCat-ID: 16013
Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen
C. Lauter, M. Frantz, T. Tröster, Lightweight Design 4 (2011) 48–54.
LibreCat | DOI
 
[14]
2011 | Conference Paper | LibreCat-ID: 15972 LibreCat
 
[13]
2011 | Conference Paper | LibreCat-ID: 15991 LibreCat
 
[12]
2011 | Conference Paper | LibreCat-ID: 15996 LibreCat
 
[11]
2011 | Conference Paper | LibreCat-ID: 16002
Hybridstrukturen für den automobilen Leichtbau
T. Tröster, C. Lauter, in: 2011.
LibreCat
 
[10]
2011 | Journal Article | LibreCat-ID: 15980
Hybrid structures for tailored structural automotive components
C. Lauter, M. Frantz, B. Siewers, T. Tröster, JEC Composites Magazine 69 (2011) 35–37.
LibreCat
 
[9]
2011 | Journal Article | LibreCat-ID: 15992
In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting
B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Tröster, H.J. Maier, Materials Science and Engineering: A 528 (2011) 7962–7967.
LibreCat | DOI
 
[8]
2011 | Journal Article | LibreCat-ID: 15997
Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen
C. Lauter, M. Frantz, T. Marten, T. Tröster, G. Bach, G. Seliger, Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe (2011).
LibreCat
 
[7]
2011 | Conference Paper | LibreCat-ID: 16003
Hybrid FRP-Steel components for automotive applications
C. Kochanek, B. Siewers, M. Frantz, M. Glowania, M. Linke, C. Lauter, T. Gries, T. Tröster, in: 2011.
LibreCat
 
[6]
2011 | Journal Article | LibreCat-ID: 15974
Automobilleichtbau durch höchstfeste Multimaterialsysteme
T. Marten, C. Lauter, T. Tröster, Ingenieurspiegel 2/2011 (2011) 67–69.
LibreCat
 
[5]
2011 | Journal Article | LibreCat-ID: 15993
Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen
C. Lauter, M. Frantz, T. Tröster, Lightweight Design 4 (2011) 48–54.
LibreCat
 
[4]
2011 | Journal Article | LibreCat-ID: 15998
Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen
M. Frantz, C. Lauter, T. Tröster, Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe (2011).
LibreCat
 
[3]
2010 | Journal Article | LibreCat-ID: 15956
Höchstfeste Multimaterialsysteme aus Stahl und Faserverbundkunststoffen
C. Lauter, T. Tröster, B. Sköck-Hartmann, T. Gries, M. Linke, VDI Konstruktion: Ingenieur-Werkstoffe 11-12/2010 (2010) IW 8-9.
LibreCat
 
[2]
2009 | Journal Article | LibreCat-ID: 15953 LibreCat | DOI
 
[1]
2008 | Conference Paper | LibreCat-ID: 15954
Development status and market potential of hot formed ballistic steels
T. Tröster, C. Howe, M. Müller, W. Rostek, in: 2008.
LibreCat
 

Search

Filter Publications

Display / Sort

Export / Embed

150 Publications

Mark all

[150]
2020 | Conference Paper | LibreCat-ID: 16930
Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[149]
2020 | Journal Article | LibreCat-ID: 15945
A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures
S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, Composite Structures 238 (2020).
LibreCat | DOI
 
[148]
2020 | Conference Paper | LibreCat-ID: 15490
Reduction of systematic measurement deviation in acoustic absorption measurement systems
L. Claes, E. Baumhögger, T. Rüther, Jan Gierse, T. Tröster, B. Henning, in: Fortschritte Der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat | Files available
 
[147]
2020 | Conference Paper | LibreCat-ID: 16939
A Holistic Approach to Optimization-Based Design of Hybrid Materials
M. Triebus, T. Tröster, in: Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
LibreCat
 
[146]
2019 | Book Chapter | LibreCat-ID: 13436
TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES
A.A. Camberg, I. Stratmann, T. Tröster, in: Technologies for Economical and Functional Lightweight Design, Berlin, Heidelberg, 2019.
LibreCat | DOI
 
[145]
2019 | Report | LibreCat-ID: 16029
Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess
T. Marten, T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess, Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2019.
LibreCat
 
[144]
2019 | Conference Paper | LibreCat-ID: 16031 LibreCat
 
[143]
2019 | Book | LibreCat-ID: 16795
Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK
J.A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, G. Grundmeier, Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK, Europäische Forschungsgesellschaft für Blechverarbeitung, Hannover, 2019.
LibreCat
 
[142]
2019 | Conference Paper | LibreCat-ID: 16827 LibreCat
 
[141]
2019 | Journal Article | LibreCat-ID: 15875
Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications
A.A. Camberg, T. Tröster, F. Bohner, J. Tölle, IOP Conference Series: Materials Science and Engineering 651 (2019) 012057.
LibreCat | DOI
 
[140]
2019 | Conference Paper | LibreCat-ID: 15976
Modeling the Energy Absorption Characteristics of Wood Crash Elements
E.F. Akbulut Irmak, J. Hanses, S. Schweizer, T. Tröster, in: 2019.
LibreCat
 
[139]
2019 | Conference Paper | LibreCat-ID: 16032
Self-sealing tool concept for RTM-processes
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.
LibreCat
 
[138]
2019 | Conference Paper | LibreCat-ID: 16033
Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, T. Tröster, in: 2019.
LibreCat
 
[137]
2019 | Conference Paper | LibreCat-ID: 16831 LibreCat
 
[136]
2019 | Conference Paper | LibreCat-ID: 16027
Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions
A.A. Camberg, M. Striewe, T. Tröster, F. Bohner, J. Tölle, in: 5th MATFEM Conference, MATFEM, München, 2019.
LibreCat
 
[135]
2019 | Conference Paper | LibreCat-ID: 16793
Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process
F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, B. Nacke, in: Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 2019, pp. 585–593.
LibreCat
 
[134]
2019 | Misc | LibreCat-ID: 16825
Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V
D. Ahlers, T. Tröster, Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V, EuroPM, Maastricht, 2019.
LibreCat
 
[133]
2019 | Journal Article | LibreCat-ID: 15950
Fracture prediction of additively manufactured AlSi10Mg materials
E.F. Akbulut Irmak, T. Tröster, Procedia Structural Integrity (2019) 190–197.
LibreCat | DOI
 
[132]
2019 | Conference Paper | LibreCat-ID: 16028
Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK
R. Grothe, J.A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, G. Meschut, in: 2019.
LibreCat
 
[131]
2019 | Conference Paper | LibreCat-ID: 16030
Press Hardening Integrated Structuring for Hybrid Components
M. Triebus, S. Bienia, T. Marten, T. Tröster, K. Dröder, in: Verlag Wissenschaftliche Scripten, 2019.
LibreCat
 
[130]
2019 | Conference Paper | LibreCat-ID: 16794
Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung
J.A. Striewe, R. Thomas, F. Fischer, T. Wiens, T. Tröster, in: DGM-Inventum GmbH , Sankt Augustin, 2019.
LibreCat
 
[129]
2018 | Conference Paper | LibreCat-ID: 16055 LibreCat
 
[128]
2018 | Conference Paper | LibreCat-ID: 16043 LibreCat | Download (ext.)
 
[127]
2018 | Conference Paper | LibreCat-ID: 16048
Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing
D. Ahlers, T. Tröster, S. Hermann, P. Koppa, P. Gloetter, M. Schaper, M. Peters, M. Burns, F. Hengsbach, A. Altmann, in: Contributed Papers from MS&T17, 2018.
LibreCat | DOI
 
[126]
2018 | Conference Paper | LibreCat-ID: 16050
LHYBS – Lightweight Design by Novel Hybrid Materials
A.A. Camberg, T. Tröster, T. Heggemann, H. Homberg, M. Schaper, J. Dietrich, W. Bremser, L. Achterberg, M. Kabst, M. Wille, V. Peckhaus, in: 2018.
LibreCat
 
[125]
2018 | Conference Paper | LibreCat-ID: 16056
Holz als Werkstoff im Automobil
S. Schweizer, T. Tröster, in: 2018.
LibreCat
 
[124]
2018 | Journal Article | LibreCat-ID: 15957
Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers
F. Hengsbach, P. Koppa, M.J. Holzweissig, M.E. Aydinöz, A. Taube, K.-P. Hoyer, O. Starykov, B. Tonn, T. Niendorf, T. Tröster, M. Schaper, Progress in Additive Manufacturing (2018) 221–231.
LibreCat | DOI
 
[123]
2018 | Journal Article | LibreCat-ID: 15958
Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, T. Tröster, R. Mahnken, G. Meschut, M. Schaper, Composites Part B: Engineering (2018) 173–185.
LibreCat | DOI
 
[122]
2018 | Conference Paper | LibreCat-ID: 15960
Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models
N. Weiß-Borkowski, J. Lian, A.A. Camberg, T. Tröster, S. Münstermann, W. Bleck, H. Gese, H. Richter, in: 2018.
LibreCat | DOI
 
 
[120]
2018 | Conference Paper | LibreCat-ID: 16052
FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING
I. Horwath, S. Dohmeier-Fischer, N. Weiß-Borkowski, T. Tröster, in: INTED2018 Proceedings, 2018.
LibreCat | DOI
 
[119]
2018 | Conference Paper | LibreCat-ID: 16057 LibreCat
 
[118]
2018 | Journal Article | LibreCat-ID: 13439
Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models
A.A. Camberg, F. Bohner, J. Tölle, A. Schneidt, S. Meiners, T. Tröster, IOP Conference Series: Materials Science and Engineering (2018).
LibreCat | DOI
 
[117]
2018 | Conference Paper | LibreCat-ID: 16034
Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures
A.A. Camberg, T. Tröster, in: HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat
 
[116]
 
[115]
2018 | Conference Paper | LibreCat-ID: 16035
Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness
J.A. Striewe, R. Grothe, J. Kowatz, T. Tröster, G. Grundmeier, G. Meschut, in: 2018.
LibreCat
 
[114]
2018 | Conference Paper | LibreCat-ID: 16042
Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures
M. Triebus, T. Tröster, A.A. Camberg, S. Bienia, K. Dröder, in: 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[113]
2018 | Conference Paper | LibreCat-ID: 16054
NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH
N. Weiß-Borkowski, I. Horwath, A. Berscheid, S. Dohmeier-Fischer, T. Tröster, in: INTED2018 Proceedings, 2018.
LibreCat | DOI
 
[112]
2017 | Journal Article | LibreCat-ID: 16062
Separation of Hybrid Structures for the Reclaim of their Single Components
S. Schweizer, A. Becker-Staines, T. Tröster, Key Engineering Materials (2017) 568–575.
LibreCat | DOI
 
[111]
2017 | Conference Paper | LibreCat-ID: 16074
Materialkombinationen in der additive Fertigung
D. Ahlers, T. Tröster, in: 2017.
LibreCat
 
[110]
2017 | Journal Article | LibreCat-ID: 15944
Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites
J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures (2017) 501–508.
LibreCat | DOI
 
[109]
2017 | Conference Paper | LibreCat-ID: 16063 LibreCat
 
[108]
2017 | Conference Paper | LibreCat-ID: 16075 LibreCat
 
[107]
2017 | Conference Paper | LibreCat-ID: 16791 LibreCat
 
[106]
2017 | Journal Article | LibreCat-ID: 15941
Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading
C. Reuter, K.-H. Sauerland, T. Tröster, Composite Structures (2017) 33–44.
LibreCat | DOI
 
[105]
2017 | Conference Paper | LibreCat-ID: 16071 LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16792
Effects of Holes in Blanks for Press Hardening Process due to Induction Heating
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.
LibreCat
 
[103]
2017 | Journal Article | LibreCat-ID: 15961
Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2017).
LibreCat | DOI
 
[102]
2017 | Conference Paper | LibreCat-ID: 16065
Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.
LibreCat
 
[101]
2017 | Conference Paper | LibreCat-ID: 16072 LibreCat
 
[100]
2017 | Journal Article | LibreCat-ID: 15942
Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact
C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
LibreCat | DOI
 
[99]
2017 | Conference Paper | LibreCat-ID: 16059
Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model
N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck, in: Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.
LibreCat | DOI
 
[98]
2017 | Conference Paper | LibreCat-ID: 16066
Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing
D. Ahlers, P. Koppa, F. Hengsbach, P. Gloetter, A. Altmann, M. Schaper, T. Tröster, in: Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[97]
2017 | Conference Paper | LibreCat-ID: 16073
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates
N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.
LibreCat
 
[96]
2016 | Conference Paper | LibreCat-ID: 16264 LibreCat
 
[95]
2016 | Conference Paper | LibreCat-ID: 16269
CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications
Z. Wang, C. Lauter, J. Löseke, T. Tröster, in: 2016.
LibreCat
 
[94]
2016 | Journal Article | LibreCat-ID: 16137
Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology
C. Lauter, C. Reuter, S. Wu, T. Tröster, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 10 (2016) 875–880.
LibreCat
 
[93]
2016 | Journal Article | LibreCat-ID: 15963
Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites 2 (2016) 272–298.
LibreCat | DOI
 
[92]
2016 | Conference Paper | LibreCat-ID: 16265
Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften
C. Zinn, M. Bobbert, C. Dammann, Z. Wang, M. Schaper, G. Meschut, R. Mahnken, T. Tröster, in: 2016.
LibreCat
 
[91]
2016 | Conference Paper | LibreCat-ID: 16138
Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess
M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, M. Schaper, T. Tröster, in: 2016.
LibreCat
 
[90]
2016 | Journal Article | LibreCat-ID: 16140
Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, G. Meschut, Journal of Materials Science Research (2016).
LibreCat | DOI
 
[89]
2016 | Conference Paper | LibreCat-ID: 16266
Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe
J.A. Striewe, C. Reuter, C. Oberkönig, C. Lauter, T. Tröster, in: 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16139
Recyclingkonzepte für hybride Strukturen
S. Schweizer, T. Tröster, Carbon Composites Magazin (2016) 23.
LibreCat
 
[87]
2016 | Journal Article | LibreCat-ID: 16141
Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding
T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C. Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites (2016).
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 16146
Technikevaluation für die generative Fertigung eines Serien-Radträgers
V. Grienitz, T. Tröster, S. Meiners, ATZ - Automobiltechnische Zeitschrift (2016) 36–41.
LibreCat | DOI
 
[85]
2016 | Conference Paper | LibreCat-ID: 16267
Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites
J.A. Striewe, C. Lauter, C. Reuter, T. Tröster, in: 2016.
LibreCat
 
[84]
2016 | Conference Paper | LibreCat-ID: 16268
Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures
J.A. Striewe, C. Reuter, C. Lauter, T. Tröster, in: 2016.
LibreCat
 
[83]
2016 | Journal Article | LibreCat-ID: 16270
Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten
T. Hickmann, D. Ahlers, T. Tröster, Der Stahlformenbauer (2016).
LibreCat
 
[82]
2016 | Journal Article | LibreCat-ID: 16143
Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids
K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn, M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2016).
LibreCat | DOI
 
[81]
2016 | Journal Article | LibreCat-ID: 15962
Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology
T. Tröster, A.A. Camberg, B. Sanitther, Z. Wang, C. Lauter, International Journal of Automotive Composites 2 (2016) 229–243.
LibreCat | DOI
 
[80]
2015 | Conference Paper | LibreCat-ID: 16132
Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests
N. Weiß Borkowski, T. Marten, H. Block, T. Tröster, in: 2015.
LibreCat
 
[79]
2015 | Conference Paper | LibreCat-ID: 16258
Fatigue life prediction for metals processed by Selective Laser Melting using finite element analyses
W. Reschetnik, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, T. Niendorf, in: 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16260
Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design
C. Lauter, Z. Wang, T. Tröster, R. Brandis, D. Köchling, in: 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16133 LibreCat
 
[76]
2015 | Journal Article | LibreCat-ID: 15964
Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
S. Leuders, M. Vollmer, F. Brenne, T. Tröster, T. Niendorf, Metallurgical and Materials Transactions A (2015) 3816–3823.
LibreCat | DOI
 
[75]
2015 | Conference Paper | LibreCat-ID: 16259
Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding
Z. Wang, C. Lauter, B. Sanitther, M. Frantz, T. Tröster, in: 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16261
Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting
S. Leuders, S. Meiners, A. Taube, T. Tröster, T. Niendorf, in: 2015.
LibreCat
 
[73]
2015 | Book Chapter | LibreCat-ID: 16134
Textile composites in the automotive industry
P. Abel, C. Lauter, T. Gries, T. Tröster, in: Fatigue of Textile Composites, 2015.
LibreCat | DOI
 
[72]
2015 | Conference Paper | LibreCat-ID: 16262 LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 16135
Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK)
M. Frantz, C. Lauter, Z. Wang, T. Tröster, in: Verlag Stahleisen GmbH, 2015, pp. 139–144.
LibreCat
 
[70]
2015 | Conference Paper | LibreCat-ID: 16263
Material follows form follows function
N. Wingenbach, T. Tröster, in: 2015.
LibreCat
 
[69]
2015 | Conference Paper | LibreCat-ID: 16131
Partial hardening of new press hardenable steels
T. Marten, H. Block, T. Tröster, in: 2015.
LibreCat
 
[68]
2015 | Conference Paper | LibreCat-ID: 16136
Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna
C. Reuter, T. Tröster, C. Lauter, in: Verlag Stahleisen GmbH, 2015, pp. 127–132.
LibreCat
 
[67]
2014 | Conference Paper | LibreCat-ID: 16257 LibreCat
 
[66]
2014 | Conference Paper | LibreCat-ID: 16098
Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic
E. Moritzer, C. Budde, T. Tröster, S. Pöhler, in: 2014, pp. 101–108.
LibreCat
 
[65]
2014 | Conference Paper | LibreCat-ID: 16120 LibreCat
 
[64]
2014 | Journal Article | LibreCat-ID: 16125
Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination
E. Moritzer, C. Budde, T. Tröster, S. Pöhler, Joining Plastics 8 (2014) 100–105.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16099 LibreCat
 
[62]
2014 | Journal Article | LibreCat-ID: 15965
On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, T. Niendorf, Journal of Materials Research (2014) 1911–1919.
LibreCat | DOI
 
[61]
2014 | Journal Article | LibreCat-ID: 16122
Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications
C. Lauter, J. Niewel, T. Tröster, International Journal of Automotive Composites (2014).
LibreCat | DOI
 
[60]
2014 | Journal Article | LibreCat-ID: 15966
Functionally Graded Alloys Obtained by Additive Manufacturing
T. Niendorf, S. Leuders, A. Riemer, F. Brenne, T. Tröster, H.A. Richard, D. Schwarze, Advanced Engineering Materials (2014) 857–861.
LibreCat | DOI
 
[59]
2014 | Conference Paper | LibreCat-ID: 16255 LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16128
Crash performance of the new press hardenable steel 15MnB6
H. Block, T. Marten, N. Weiß Borkowski, T. Tröster, in: 2014.
LibreCat
 
[57]
2014 | Conference Paper | LibreCat-ID: 16130 LibreCat
 
[56]
2014 | Conference Paper | LibreCat-ID: 16256
Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting
S. Leuders, T. Tröster, F. Brenne, A. Riemer, H.A. Richard, T. Niendorf, in: 2014.
LibreCat
 
[55]
2014 | Conference Paper | LibreCat-ID: 16097
Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids
M. Klein, D. Hülsbusch, F. Walther, M. Bartsch, J. Hausmann, M. Frantz, C. Lauter, T. Tröster, in: 2014, pp. 188–193.
LibreCat
 
[54]
2014 | Conference Paper | LibreCat-ID: 16129
Numerical simulation of the energy absorption of fiber-reinforced plastics
C. Reuter, D. Flore, S. Pöhler, K.H. Sauerland, T. Tröster, in: 2014.
LibreCat
 
[53]
2014 | Journal Article | LibreCat-ID: 15967
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
A. Riemer, S. Leuders, M. Thöne, H.A. Richard, T. Tröster, T. Niendorf, Engineering Fracture Mechanics (2014) 15–25.
LibreCat | DOI
 
[52]
2013 | Journal Article | LibreCat-ID: 15968
Highly Anisotropic Steel Processed by Selective Laser Melting
T. Niendorf, S. Leuders, A. Riemer, H.A. Richard, T. Tröster, D. Schwarze, Metallurgical and Materials Transactions B (2013) 794–796.
LibreCat | DOI
 
[51]
2013 | Conference Paper | LibreCat-ID: 16017
Graded Lightweight Structures Through Hot Forming
T. Marten, H. Block, T. Tröster, T. Gerber, S. Sikora, F.-J. Lenze, in: 2013.
LibreCat
 
[50]
2013 | Conference Paper | LibreCat-ID: 16024 LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16018
Influences of Automotive Process Characteristics on Hybrid Structures
C. Lauter, T. Hochschulz, M. Frantz, T. Tröster, in: 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16020
Crashworthiness of Hybrid Structures
T. Tröster, C. Lauter, C. Reuter, in: 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16025 LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16019 LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16021 LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16026 LibreCat
 
[43]
2013 | Conference Paper | LibreCat-ID: 16022
Manufacturing of Hybrid Structures by Prepreg Press Technology
C. Lauter, T. Krooß, T. Tröster, in: 2013.
LibreCat
 
[42]
2013 | Book Chapter | LibreCat-ID: 16096
Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications
C. Lauter, T. Tröster, C. Reuter, in: Advanced Composite Materials for Automotive Applications, Chichester, UK, 2013.
LibreCat | DOI
 
[41]
2013 | Journal Article | LibreCat-ID: 16016
Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗
A. Riemer, S. Leuders, H.A. Richard, T. Tröster, Materials Testing (2013) 537–543.
LibreCat | DOI
 
[40]
2013 | Conference Paper | LibreCat-ID: 16023
Leichtbau mit Hybridstrukturen im Automobil
T. Tröster, C. Lauter, C. Reuter, in: 2013.
LibreCat
 
[39]
2012 | Conference Paper | LibreCat-ID: 15987
Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements
C. Lauter, M. Frantz, J.P. Kohler, T. Tröster, in: 2012.
LibreCat
 
[38]
2012 | Report | LibreCat-ID: 16012
P 850 – Wirbelbetterwärmung von Platinen für das Presshärten
T. Tröster, T. Marten, S. Adelbert, A. Kadim, P 850 – Wirbelbetterwärmung von Platinen für das Presshärten, Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, Düsseldorf, 2012.
LibreCat
 
[37]
2012 | Journal Article | LibreCat-ID: 15983
Endkonturennahe Fertigung von höchstfesten Hybridbauteilen
C. Lauter, S. Werneke, B. Siewers, T. Tröster, Lightweight Design (2012) 53–58.
LibreCat | DOI
 
[36]
2012 | Conference Paper | LibreCat-ID: 15988 LibreCat
 
[35]
2012 | Journal Article | LibreCat-ID: 15984
Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements
H.C. Schmidt, U. Damerow, C. Lauter, B. Gorny, F. Hankeln, W. Homberg, T. Tröster, H.J. Maier, R. Mahnken, Key Engineering Materials (2012) 295–300.
LibreCat | DOI
 
[34]
2012 | Journal Article | LibreCat-ID: 15989 LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16007
Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V
M. Thöne, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.
LibreCat
 
[32]
2012 | Conference Paper | LibreCat-ID: 15985
Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP
C. Reuter, M. Frantz, C. Lauter, H. Block, T. Tröster, in: 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16008
Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4
A. Riemer, S. Leuders, T. Tröster, H.A. Richard, DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit (2012).
LibreCat
 
[30]
2012 | Journal Article | LibreCat-ID: 16010
Methodik für die Produktentstehung hybrider Leichtbaustrukturen
C. Lauter, T. Tröster, R. Brandis, J. Gausemeier, Lightweight Design 5 (2012) 50–56.
LibreCat | DOI
 
[29]
2012 | Journal Article | LibreCat-ID: 16015
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
S. Leuders, M. Thöne, A. Riemer, T. Niendorf, T. Tröster, H.A. Richard, H.J. Maier, International Journal of Fatigue (2012) 300–307.
LibreCat | DOI
 
[28]
2012 | Journal Article | LibreCat-ID: 15981
Automobilleichtbau mit innovativen Werkstoffen und Prozessen
T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, M. Thöne, Forschungsforum Paderborn 15 (2012) 30–38.
LibreCat
 
[27]
2012 | Conference Paper | LibreCat-ID: 15986
Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs
B. Gorny, F. Hankeln, C. Lauter, H.C. Schmidt, U. Damerow, R. Mahnken, H.J. Maier, T. Tröster, W. Homberg, in: 2012.
LibreCat
 
[26]
2012 | Conference Paper | LibreCat-ID: 16004 LibreCat
 
[25]
2012 | Conference Paper | LibreCat-ID: 16009 LibreCat
 
[24]
2011 | Conference Paper | LibreCat-ID: 15970 LibreCat
 
[23]
2011 | Journal Article | LibreCat-ID: 15975
Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen
C. Lauter, D. Thomas, M. Frantz, J. Niewel, T. Tröster, Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte 2 (2011) 6–7.
LibreCat
 
[22]
2011 | Conference Paper | LibreCat-ID: 15994
Multi-material systems for tailored automotive structural components
J. Dau, C. Lauter, U. Damerow, W. Homberg, T. Tröster, in: 2011.
LibreCat
 
[21]
2011 | Conference Paper | LibreCat-ID: 15999
Fluidized bed heating of blanks for the hot forming process
T. Marten, T. Tröster, S. Adelbert, A. Kadim, in: 2011.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 16000
Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess
T. Marten, J. Niewel, T. Tröster, HTM Journal of Heat Treatment and Materials (2011) 309–315.
LibreCat | DOI
 
[19]
2011 | Journal Article | LibreCat-ID: 15969
Multimaterialsysteme höchstfest verbunden
C. Lauter, M. Sarrazin, T. Tröster, Adhäsion – Kleben und Dichten 3/2011 (2011) 39–43.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15971 LibreCat
 
[17]
2011 | Conference Paper | LibreCat-ID: 15990
Production of load-adapted lightweight designs by partial hardening
D. Thomas, H. Block, T. Tröster, in: 2011.
LibreCat
 
[16]
2011 | Conference Paper | LibreCat-ID: 15995
Multi-material systems. High strength steels and fiber-reinforced plastics
C. Lauter, B. Sköck-Hartmann, T. Gries, T. Tröster, M. Linke, in: 2011.
LibreCat
 
[15]
2011 | Journal Article | LibreCat-ID: 16013
Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen
C. Lauter, M. Frantz, T. Tröster, Lightweight Design 4 (2011) 48–54.
LibreCat | DOI
 
[14]
2011 | Conference Paper | LibreCat-ID: 15972 LibreCat
 
[13]
2011 | Conference Paper | LibreCat-ID: 15991 LibreCat
 
[12]
2011 | Conference Paper | LibreCat-ID: 15996 LibreCat
 
[11]
2011 | Conference Paper | LibreCat-ID: 16002
Hybridstrukturen für den automobilen Leichtbau
T. Tröster, C. Lauter, in: 2011.
LibreCat
 
[10]
2011 | Journal Article | LibreCat-ID: 15980
Hybrid structures for tailored structural automotive components
C. Lauter, M. Frantz, B. Siewers, T. Tröster, JEC Composites Magazine 69 (2011) 35–37.
LibreCat
 
[9]
2011 | Journal Article | LibreCat-ID: 15992
In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting
B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Tröster, H.J. Maier, Materials Science and Engineering: A 528 (2011) 7962–7967.
LibreCat | DOI
 
[8]
2011 | Journal Article | LibreCat-ID: 15997
Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen
C. Lauter, M. Frantz, T. Marten, T. Tröster, G. Bach, G. Seliger, Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe (2011).
LibreCat
 
[7]
2011 | Conference Paper | LibreCat-ID: 16003
Hybrid FRP-Steel components for automotive applications
C. Kochanek, B. Siewers, M. Frantz, M. Glowania, M. Linke, C. Lauter, T. Gries, T. Tröster, in: 2011.
LibreCat
 
[6]
2011 | Journal Article | LibreCat-ID: 15974
Automobilleichtbau durch höchstfeste Multimaterialsysteme
T. Marten, C. Lauter, T. Tröster, Ingenieurspiegel 2/2011 (2011) 67–69.
LibreCat
 
[5]
2011 | Journal Article | LibreCat-ID: 15993
Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen
C. Lauter, M. Frantz, T. Tröster, Lightweight Design 4 (2011) 48–54.
LibreCat
 
[4]
2011 | Journal Article | LibreCat-ID: 15998
Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen
M. Frantz, C. Lauter, T. Tröster, Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe (2011).
LibreCat
 
[3]
2010 | Journal Article | LibreCat-ID: 15956
Höchstfeste Multimaterialsysteme aus Stahl und Faserverbundkunststoffen
C. Lauter, T. Tröster, B. Sköck-Hartmann, T. Gries, M. Linke, VDI Konstruktion: Ingenieur-Werkstoffe 11-12/2010 (2010) IW 8-9.
LibreCat
 
[2]
2009 | Journal Article | LibreCat-ID: 15953 LibreCat | DOI
 
[1]
2008 | Conference Paper | LibreCat-ID: 15954
Development status and market potential of hot formed ballistic steels
T. Tröster, C. Howe, M. Müller, W. Rostek, in: 2008.
LibreCat
 

Search

Filter Publications

Display / Sort

Export / Embed