229 Publications
2025 | Journal Article | LibreCat-ID: 58379 | 
Chalicheemalapalli Jayasankar, D., Tröster, T., & Marten, T. (2025). Optimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency. Materials, 18(3), Article 571. https://doi.org/10.3390/ma18030571
LibreCat
| DOI
| Download (ext.)
2025 | Journal Article | LibreCat-ID: 58163 |
Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., & Tröster, T. (2025). Correlation between interlaminar shear strength of CFRP and joint strength of aluminium-CFRP hybrid joints. The Journal of Adhesion, 1–26. https://doi.org/10.1080/00218464.2024.2439956
LibreCat
| DOI
| Download (ext.)
2025 | Journal Article | LibreCat-ID: 58451 |
Chalicheemalapalli Jayasankar, D., Tröster, T., Ellouz, M., & Kordisch, T. (2025). Intrinsic production of metal-carbon fiber reinforced plastic hybrid shafts using vacuum-assisted resin transfer molding. Journal of Composite Materials. https://doi.org/10.1177/00219983251313981
LibreCat
| DOI
| Download (ext.)
2025 | Conference Paper | LibreCat-ID: 59441
Devulapally, D. R., & Tröster, T. (2025). Modelling strategies for non-rotationally symmetric joints. Materials Research Proceedings, 52. https://doi.org/10.21741/9781644903551-21
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 55762
Delp, A., Wu, S., Freund, J., Scholz, R., Löbbecke, M., Tröster, T., Haubrich, J., & Walther, F. (2024). Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP. Materials, 17(8), Article 1907. https://doi.org/10.3390/ma17081907
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 55743
Irmak, H., Tinkloh, S. R., Marten, T., & Tröster, T. (2024). Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. Journal of Composites Science, 8(8), Article 316. https://doi.org/10.3390/jcs8080316
LibreCat
| DOI
2024 | Conference Abstract | LibreCat-ID: 57202
Ostermann, M., Marten, T., & Tröster, T. (2024). Prospective Life Cycle Assessment of Lightweight Structures in Vehicles for On-Demand Mobility Systems. 16th Biennial International Conference on EcoBalance. 16th Biennial International Conference on EcoBalance, Sendai, Japan.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 57537
Ostermann, M., Marten, T., & Tröster, T. (2024). Scenario-based life cycle assessment of vehicle lightweight structures. Sustainability in Product and Production Engineering. Sustainability in Product and Production Engineering, Bad Nauheim.
LibreCat
2024 | Journal Article | LibreCat-ID: 57468
Chalicheemalapalli Jayasankar, D., Gnaase, S., Lehnert, D., Walter, A., Rohling, R., & Tröster, T. (2024). Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling. Metals, 14(12), Article 1353. https://doi.org/10.3390/met14121353
LibreCat
| Files available
| DOI
2024 | Journal Article | LibreCat-ID: 57467
Lehnert, D., Bödger, C., Pabel, P., Scheidemann, C., Hemsel, T., Gnaase, S., Kostka, D., & Tröster, T. (2024). The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component. Crystals, 14(11), Article 1001. https://doi.org/10.3390/cryst14111001
LibreCat
| Files available
| DOI
2024 | Journal Article | LibreCat-ID: 56089 |
Chalicheemalapalli Jayasankar, D., Gnaase, S., Kaiser, M. A., Lehnert, D., & Tröster, T. (2024). Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications. Metals, 14(7), Article 772. https://doi.org/10.3390/met14070772
LibreCat
| DOI
| Download (ext.)
2024 | Journal Article | LibreCat-ID: 58381
Suresh, K., Kesavulu, C. R., Chalicheemalapalli Jayasankar, D., Pecharapa, W., Kagola, U. K., Tröster, T., & Jayasankar, C. K. (2024). Stokes and anti-Stokes emission characteristics of Er3+/Yb3+ co-doped zinc tellurite glasses under 377 and 1550 nm excitations for solar energy conversion application. Journal of Luminescence, 277, Article 120948. https://doi.org/10.1016/j.jlumin.2024.120948
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 55638 |
Devulapally, D. R., Martin, S., & Tröster, T. (2024). Non-rotationally symmetric joints – Mechanisms and load bearing capacity. Materials Research Proceedings. https://doi.org/10.21741/9781644903131-183
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 47536
Borgert, T., Milaege, D., Schweizer, S., Homberg, W., Schaper, M., & Tröster, T. (2023). Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology. International Journal of Material Forming, 16(6), Article 59. https://doi.org/10.1007/s12289-023-01785-w
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak, E. F., Hanses, H., Horwath, I., & Tröster, T. (2023). Case Study III: Challenges of lightweight design, vehicles, and rescuers. In Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag. https://doi.org/10.14361/9783839463772-006
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter, J., Aydin, S., Marten, T., & Tröster, T. (2023). Analysis and Optimization of Joint Formation in Hybrid Compression Molding. 23nd International Conference on Composite Materials (ICCM23 2023), Belfast.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar, D., Stallmeister, T., Lückenkötter, J., & Tröster, T. (2023). In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding. 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway .
LibreCat
| Files available
2023 | Book Chapter | LibreCat-ID: 44502
Ostermann, M., Behm, J., Marten, T., Tröster, T., Weyer, J., Cepera, K., & Adelt, F. (2023). Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility. In H. Proff (Ed.), Towards the New Normal in Mobility. Springer Fachmedien Wiesbaden. https://doi.org/10.1007/978-3-658-39438-7_25
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43464 |
Ostermann, M., Grenz, J., Triebus, M., Cerdas, F., Marten, T., Tröster, T., & Herrmann, C. (2023). Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures. Energies, 16(8), Article 3371. https://doi.org/10.3390/en16083371
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 44154
Lückenkötter, J., Leimbach, J. P., Stallmeister, T., Marten, T., & Tröster, T. (2023). Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector. Materials Research Proceedings, 28, 249–258. https://doi.org/10.21741/9781644902479-27
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 45782 |
Grenz, J., Ostermann, M., Käsewieter, K., Cerdas, F., Marten, T., Herrmann, C., & Tröster, T. (2023). Integrating Prospective LCA in the Development of Automotive Components. Sustainability, 15(13), Article 10041. https://doi.org/10.3390/su151310041
LibreCat
| Files available
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 46486
Pfeifer, F., Knorr, L., Schlosser, F., Marten, T., & Tröster, T. (2023). Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes. Journal of Sustainable Development of Energy, Water and Environment Systems, 11(3), 1–20. https://doi.org/10.13044/j.sdewes.d11.0450
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 42459
Ostermann, M., Behm, J., Marten, T., & Tröster, T. (2023). NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen. WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte. WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, Stuttgart.
LibreCat
2023 | Journal Article | LibreCat-ID: 46494
Freund, J., Löbbecke, M., Delp, A., Walther, F., Wu, S., Tröster, T., & Haubrich, J. (2023). Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints. The Journal of Adhesion, 1–31. https://doi.org/10.1080/00218464.2023.2223475
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 55760
Freund, J., Lützenkirchen, I., Löbbecke, M., Delp, A., Walther, F., Wu, S., Tröster, T., & Haubrich, J. (2023). Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints. Journal of Composites Science, 7(10), Article 427. https://doi.org/10.3390/jcs7100427
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46495
Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., & Tröster, T. (2023). Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process. The Journal of Adhesion, 1–29. https://doi.org/10.1080/00218464.2023.2245758
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48597
Wu, S., Freund, J., Delp, A., Haubrich, J., Löbbecke, M., Walther, F., & Tröster, T. (2023). Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg. 23rd International Conference on Composite Materials (ICCM23 2023).
LibreCat
2023 | Conference Abstract | LibreCat-ID: 49436
Kaiser, M. A., Reitz, A., Konrad, S., Meyer, T., Marten, T., & Tröster, T. (2023). Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess. In M. Merklein (Ed.), Workshop Warmblechumformung (Vol. 18, pp. 99–118). Lehrstuhl für Fertigungstechnologie.
LibreCat
2023 | Conference Paper | LibreCat-ID: 50742 |
Bödger, C., Gnaase, S., Lehnert, D., & Tröster, T. (2023). Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication, Austin.
LibreCat
| Files available
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 37200
Gnaase, S., Niggemeyer, D., Lehnert, D., Bödger, C., & Tröster, T. (2023). Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. Crystals, 13(2), Article 157. https://doi.org/10.3390/cryst13020157
LibreCat
| Files available
| DOI
2022 | Newspaper Article | LibreCat-ID: 33001
Linnig, C., & Tröster, T. (2022). Sauber recyceln- Innovative Verfahrenskombination mit Ultraschall ermöglicht sicheren Umgang mit recycelten Carbonfasern. CU Reports.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 37258
Haller, S., Tinkloh, S. R., Tröster, T., & Brandt, R. (2022). The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element. 5th International Conference Hybrid 2022 Material & Structures. 5th International Conference Hybrid 2022 Material & Structures.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32819
Pfeifer, F., Tröster, T., Marten, T., Dietrich, A., Nacke, B., & Grundmeier, G. (2022). Investigation on hot sheet metal forming by means of a longitudinal flux inductor. Proceedings of the 6th International Conference on Steels in Cars and Trucks. 6th International Conference on Steels in Cars and Trucks, Mailand.
LibreCat
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, D., Striewe, J. A., Grydin, O., Meinderink, D., Grundmeier, G., Schaper, M., & Tröster, T. (2022). Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications. Advanced Composite Materials, 1–16. https://doi.org/10.1080/09243046.2022.2143746
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31496
Wu, T., Kruse, R., Tinkloh, S. R., Tröster, T., Zinn, W., Lauhoff, C., & Niendorf, T. (2022). Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects. Journal of Composites Science, 6(5), Article 138. https://doi.org/10.3390/jcs6050138
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34069
Schramm, B., Martin, S., Steinfelder, C., Bielak, C. R., Brosius, A., Meschut, G., Tröster, T., Wallmersperger, T., & Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes, 6, Article 100133. https://doi.org/10.1016/j.jajp.2022.100133
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32814
Wu, T., Degener, S., Tinkloh, S. R., Liehr, A., Zinn, W., Nobre, J. P., Tröster, T., & Niendorf, T. (2022). Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction. Composite Structures, Article 116071. https://doi.org/10.1016/j.compstruct.2022.116071
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29951 |
Martin, S., Bielak, C. R., Bobbert, M., Tröster, T., & Meschut, G. (2022). Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. https://doi.org/10.1007/s11740-021-01103-w
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32813 |
Martin, S., Kurtusic, K., & Tröster, T. (2022). Influence of the Surrounding Sheet Geometry on a Clinched Joint. Key Engineering Materials, 927. https://doi.org/ https://doi.org/10.4028/p-09md1c
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32869
Stallmeister, T., & Tröster, T. (2022). In-Mold-Assembly of Hybrid Bending Structures by Compression Molding. Key Engineering Materials, 926, 1457–1467. https://doi.org/10.4028/p-5fxp53
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 32871
Triebus, M., Ostermann, M., Tröster, T., & Horwath, I. (2022). Advanced Automotive Components by Fiber-Metal-Laminates. Materials in Car Body Engineering - Bad Nauheim. Materials in Car Body Engineering 2022, Bad Nauheim.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 32875
Ostermann, M., Behm, J., Marten, T., Tröster, T., Weyer, J., Cepera, K., & Adelt, F. (2022). Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen nachhaltiger Mobilität. 14. Wissenschaftsforum Mobilität. 14. Wissenschaftsforum Mobilität, Duisburg.
LibreCat
2022 | Journal Article | LibreCat-ID: 30510
Delp, A., Freund, J., Wu, S., Scholz, R., Löbbecke, M., Haubrich, J., Tröster, T., & Walther, F. (2022). Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties. Composite Structures, 285, Article 115238. https://doi.org/10.1016/j.compstruct.2022.115238
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 28440 |
Triebus, M., Reitz, A., Grydin, O., Grenz, J., Schneidt, A., Erhardt, R., Tröster, T., & Schaper, M. (2021). Forming Simulation of Tailored Press Hardened Parts. 13th European LS-DYNA Conference 2021. 13th European LS-DYNA Conference 2021, Ulm.
LibreCat
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
Tröster, T., Pfeifer, F., Nacke, B., & Dietrich, A. (2021). Großserientaugliche induktive Platinenerwärmung für den Warmformprozess (Vol. P1038). Forschungsvereinigung Stahlanwendung e.V.
LibreCat
2021 | Book (Editor) | LibreCat-ID: 26996
Koch, R., Gräßler, I., Zimmer, D., & Tröster, T. (Eds.). (2021). Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix (Vol. 25). Shaker Verlag.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2021). Development of a submodel technique for FFT-based solvers in micromechanical analysis. Presented at the 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online).
LibreCat
2021 | Conference Paper | LibreCat-ID: 20857
Camberg, A. A., Tröster, T., & Latuske, C. (2021). Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing. Presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg: Springer. https://doi.org/10.1007/978-3-662-62924-6_28
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20858
Camberg, A. A., Tröster, T., Wingenbach, N., Hielscher, C., & Grenz, J. (2021). A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design. Presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg: Springer. https://doi.org/10.1007/978-3-662-62924-6_30
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22518 |
Triebus, M., Gierse, J., Marten, T., & Tröster, T. (2021). A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions. IOP Conference Series: Materials Science and Engineering, Article 012052. 40th International Deep-Drawing Research Group Conference (IDDRG 2021), Virtual - Stuttgart. https://doi.org/10.1088/1757-899x/1157/1/012052
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 22859
Grothe, R., Striewe, J. A., Meinderink, D., Tröster, T., & Grundmeier, G. (2021). Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films. The Journal of Adhesion. https://doi.org/10.1080/00218464.2021.1957676
LibreCat
| DOI
2021 | Report | LibreCat-ID: 29807
Linnig, C., & Tröster, T. (2021). Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Deutsche Bundesstiftung Umwelt (DBU).
LibreCat
2021 | Journal Article | LibreCat-ID: 24131
Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., & Niendorf, T. (2021). Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components. Metals, Article 335. https://doi.org/10.3390/met11020335
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2021). The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis. Metals, Article 156. https://doi.org/10.3390/met11010156
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24130
Magnier, A., Wu, T., Tinkloh, S. R., Tröster, T., Scholtes, B., & Niendorf, T. (2021). On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites. Polymer Testing, Article 107146. https://doi.org/10.1016/j.polymertesting.2021.107146
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 21726 |
Triebus, M., & Tröster, T. (2021). HyOpt - Optimization-Based Development of Hybrid Materials. 9th NRW Nano Conference - Innovations in Materials and Applications. 9th NRW Nano Conference - Innovations in Materials and Applications, Web.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 33895
Camberg, A. A., Erhart, T., & Tröster, T. (2021). A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials, 14(17), Article 5106. https://doi.org/10.3390/ma14175106
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29293 |
Martin, S., Schütte, J., Bäumler, C., Sextro, W., & Tröster, T. (2021). Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics, 6, Article 100065. https://doi.org/10.1016/j.finmec.2021.100065
LibreCat
| DOI
| Download (ext.)
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, W.-G., Bobbert, M., Böhme, M., Dammann, C., Dittes, A., Gießmann, M., Hühne, C., Ihlemann, J., Kießling, R., Lampke, T., Lenz, P., Mahnken, R., Meschut, G., Müller, R., Nier, M., Prussak, R., Riemer, M., Sander, S., Schaper, M., … Zinn, C. (2021). Hybridprofile für Trag- und Crashstrukturen. In Intrinsische Hybridverbunde für Leichtbautragstrukturen. https://doi.org/10.1007/978-3-662-62833-1_3
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23431
Cheng, C., Wang, Z., Jin, Z., Ju, X., Schweizer, S., Tröster, T., & Mahnken, R. (2021). Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure. Composites Part B: Engineering, 224, Article 109209. https://doi.org/10.1016/j.compositesb.2021.109209
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41508
Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., & Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A, 831, Article 142312. https://doi.org/10.1016/j.msea.2021.142312
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister, T., Martin, S., Marten, T., & Tröster, T. (2021). Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim.
LibreCat
2021 | Journal Article | LibreCat-ID: 24009
Camberg, A. A., Erhart, T., & Tröster, T. (2021). A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials, Article 5106. https://doi.org/10.3390/ma14175106
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Haase, M., Gierse, J., Zimmer, D., Tröster, T., & Schaper, M. (2021). Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology, Article 117183. https://doi.org/10.1016/j.jmatprotec.2021.117183
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 27700
Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., & Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A, Article 142312. https://doi.org/10.1016/j.msea.2021.142312
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 20843
Wu, T., Tinkloh, S. R., Tröster, T., & Zinn, W. (2020). Residual stress measurement in GFRP/steel hybrid components. In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. Web-Conference, Germany.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20854 |
Camberg, A. A., & Tröster, T. (2020). A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter. Presented at the International Deep-Drawing Research Group (IDDRG 2020), Seoul, South Korea. https://doi.org/10.1088/1757-899X/967/1/012077
LibreCat
| DOI
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 20856 |
Camberg, A. A., Erhart, T., & Tröster, T. (2020). Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework. Presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea. https://doi.org/10.13140/RG.2.2.23924.17288
LibreCat
| DOI
| Download (ext.)
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer, S., Akbulut Irmak, E. F., & Tröster, T. (2020). Wood-based materials as a sustainable alternative for future car body construction. Future Materials, vitual.
LibreCat
2020 | Conference Paper | LibreCat-ID: 16939 |
Triebus, M., & Tröster, T. (2020). A Holistic Approach to Optimization-Based Design of Hybrid Materials. In Proceedings 4th International Conference Hybrid Materials & Structures. Web-Conference.
LibreCat
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 15490 |
Claes, L., Baumhögger, E., Rüther, T., Gierse, J., Tröster, T., & Henning, B. (2020). Reduction of systematic measurement deviation in acoustic absorption measurement systems. Fortschritte Der Akustik - DAGA 2020, 1077–1080.
LibreCat
| Files available
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2020). Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids. Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany.
LibreCat
2020 | Journal Article | LibreCat-ID: 20842
Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., & Niendorf, T. (2020). Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method. Journal of Composites Science, Article 143. https://doi.org/10.3390/jcs4030143
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar, D., Stallmeister, T., Wang, Z., & Tröster, T. (2020). MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED. In J. M. Hausmann, M. Siebert, A. von Hehl, & K. A. Weidenmann (Eds.), Hybrid 2020 Materials and Structures (pp. 167–172).
LibreCat
| Files available
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2020). A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. Composite Structures, 238, Article 111926. https://doi.org/10.1016/j.compstruct.2020.111926
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 58383
Basavapoornima, Ch., Maheswari, T., Chalicheemalapalli Jayasankar, D., Kesavulu, C. R., Tröster, T., & Jayasankar, C. K. (2020). Thermal, structural, mechanical and 1.8 μm luminescence properties of the thulium doped Pb-K-Al-Na glasses for optical fiber amplifiers. Journal of Non-Crystalline Solids, 530, Article 119773. https://doi.org/10.1016/j.jnoncrysol.2019.119773
LibreCat
| DOI
2019 | Report | LibreCat-ID: 21210
Ahlers, D., & Tröster, T. (2019). Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn. https://doi.org/10.2314/KXP:1695591887
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer, F., Dietrich, A., Marten, T., Tröster, T., & Nacke, B. (2019). Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process. In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel (pp. 585–593). Luleå.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16794
Striewe, J. A., Thomas, R., Fischer, F., Wiens, T., & Tröster, T. (2019). Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung. Presented at the Tagung Werkstoffprüfung 2019, Sankt Augustin: DGM-Inventum GmbH .
LibreCat
2019 | Misc | LibreCat-ID: 16825
Ahlers, D., & Tröster, T. (2019). Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16827
Camberg, A. A., & Tröster, T. (2019). Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks. In 26. Sächsische Fachtagung Umformtechnik. Dresden.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2019). A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures. Presented at the 22nd International Conference on Composite Structures (ICCS22) and 1st Chinese Conference on Composite Structures (CCCS1), Wuhan.
LibreCat
2019 | Journal Article | LibreCat-ID: 15875
Camberg, A. A., Tröster, T., Bohner, F., & Tölle, J. (2019). Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. IOP Conference Series: Materials Science and Engineering, 651, 012057. https://doi.org/10.1088/1757-899X/651/1/012057
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak, E. F., & Tröster, T. (2019). Fracture prediction of additively manufactured AlSi10Mg materials. Procedia Structural Integrity, 190–197. https://doi.org/10.1016/j.prostr.2019.12.101
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak, E. F., Hanses, J., Schweizer, S., & Tröster, T. (2019). Modeling the Energy Absorption Characteristics of Wood Crash Elements. 12th European LS-DYNA Conference, Koblenz.
LibreCat
2019 | Report | LibreCat-ID: 16029
Marten, T., & Tröster, T. (2019). Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16030
Triebus, M., Bienia, S., Marten, T., Tröster, T., & Dröder, K. (2019). Press Hardening Integrated Structuring for Hybrid Components. Presented at the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden: Verlag Wissenschaftliche Scripten.
LibreCat
2019 | Book Chapter | LibreCat-ID: 13436
Camberg, A. A., Stratmann, I., & Tröster, T. (2019). TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In Technologies for economical and functional lightweight design. Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-58206-0_12
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., & Tröster, T. (2019). Self-sealing tool concept for RTM-processes. 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne .
LibreCat
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., & Tröster, T. (2019). Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. Tagung Werkstoffprüfung 2019, Neu-Ulm.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16027
Camberg, A. A., Striewe, M., Tröster, T., Bohner, F., & Tölle, J. (2019). Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions. 5th MATFEM Conference. 5th MATFEM Conference, Schloss Hohenkammer.
LibreCat
2019 | Book | LibreCat-ID: 16795
Striewe, J. A., Tröster, T., Kowatz, J., Meschut, G., Grothe, R., & Grundmeier, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16028
Grothe, R., Striewe, J. A., Kowatz, J., Grundmeier, G., Tröster, T., & Meschut, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. 39. EFB-Kolloquium, Bad Boll .
LibreCat
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg, A. A., Tröster, T., Sotirov, N., Tölle, J., & Bohner, F. (2018). Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions. In Materials Science and Engineering (MSE) Congress 2018. Darmstadt.
LibreCat
2018 | Misc | LibreCat-ID: 6594
Claes, L., Zeipert, H., Koppa, P., Tröster, T., & Henning, B. (2018). Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck.
LibreCat
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski, N., Lian, J., Camberg, A. A., Tröster, T., Münstermann, S., Bleck, W., … Richter, H. (2018). Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models. https://doi.org/10.1063/1.5035024
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16034
Camberg, A. A., & Tröster, T. (2018). Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. Bremen: DGM - Deutsche Gesellschaft für Materialkunde e.V.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, D., & Tröster, T. (2018). Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16040
Wang, Z., & Tröster, T. (2018). Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. Presented at the 21th International Conference on Composite Structures (ICCS21), Bologna, Italy.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16042 |
Triebus, M., Tröster, T., Camberg, A. A., Bienia, S., & Dröder, K. (2018). Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In 15. Deutsches LS-Dyna Forum. Bamberg.
LibreCat
| Download (ext.)
2018 | Conference Paper | LibreCat-ID: 16043 |
Camberg, A. A., Tröster, T., Schneidt , A., Sotirov , N., & Tölle, J. (2018). The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In 15. Deutsches LS-Dyna Forum. Bamberg.
LibreCat
| Download (ext.)
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer, S., & Tröster, T. (2018). Holz als Werkstoff im Automobil. 2. Siegener Leichtbaukolloquium, Siegen.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16057
Wang, Z., & Tröster, T. (2018). Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. Presented at the 2. Siegener Leichtbaukolloquium, Siegen.
LibreCat
2018 | Journal Article | LibreCat-ID: 13439
Camberg, A. A., Bohner, F., Tölle, J., Schneidt, A., Meiners, S., & Tröster, T. (2018). Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/418/1/012018
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16052
Horwath, I., Dohmeier-Fischer, S., Weiß-Borkowski, N., & Tröster, T. (2018). FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING. INTED2018 Proceedings. 12th International Technology, Education and Development Conference, Valencia. https://doi.org/10.21125/inted.2018.1651
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., & Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing, 221–231. https://doi.org/10.1007/s40964-018-0044-4
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, D., Tröster, T., Hermann, S., Koppa, P., Gloetter, P., Schaper, M., Peters, M., Burns, M., Hengsbach, F., & Altmann, A. (2018). Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. Contributed Papers from MS&T17. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski, N., Horwath, I., Berscheid, A., Dohmeier-Fischer, S., & Tröster, T. (2018). NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH. INTED2018 Proceedings. https://doi.org/10.21125/inted.2018.1298
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16035
Striewe, J. A., Grothe, R., Kowatz, J., Tröster, T., Grundmeier, G., & Meschut, G. (2018). Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness. 18th European Conference on Composite Materials, Athen.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, A. A., Tröster, T., Heggemann, T., Homberg, H., Schaper, M., Dietrich, J., Bremser, W., Achterberg, L., Kabst, M., Wille, M., & Peckhaus, V. (2018). LHYBS – Lightweight Design by Novel Hybrid Materials. 8th NRW Nano Conference, Innovations in Materials and Applications, Dortmund.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., Wang, Z., Tröster, T., & Schaper, M. (2018). Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM. 3rd Int Conf on Hybrid Materials and Structures, Bremen.
LibreCat
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., & Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing, 221–231. https://doi.org/10.1007/s40964-018-0044-4
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., & Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing, 3(4), 221–231. https://doi.org/10.1007/s40964-018-0044-4
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15958
Zinn, C., Bobbert, M., Dammann, C., Wang, Z., Tröster, T., Mahnken, R., Meschut, G., & Schaper, M. (2018). Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering, 173–185. https://doi.org/10.1016/j.compositesb.2018.05.030
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 6559
Claes, L., Zeipert, H., Koppa, P., Tröster, T., & Henning, B. (2017). Additively manufactured acoustic diffuser structures for ultrasonic measurement applications. In Proceedings of Meetings on Acoustics (p. 030004). Honolulu. https://doi.org/10.1121/2.0000688
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., & Tröster, T. (2017). Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating. Presented at the 5th International Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., & Tröster, T. (2017). Effects of Holes in Blanks for Press Hardening Process due to Induction Heating. Presented at the XVIII International UIE-Congress Electrotechnologies for Material Processing, Hannover.
LibreCat
2017 | Journal Article | LibreCat-ID: 15941
Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading. Composite Structures, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15942
Reuter, C., & Tröster, T. (2017). Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures, 117, 1–9. https://doi.org/10.1016/j.tws.2017.03.034
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15944
Striewe, J. A., Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures, 501–508. https://doi.org/10.1016/j.tws.2017.11.011
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S., & Bleck, W. (2017). Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model. In Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. https://doi.org/10.1063/1.5007961
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 16062
Schweizer, S., Becker-Staines, A., & Tröster, T. (2017). Separation of Hybrid Structures for the Reclaim of their Single Components. Key Engineering Materials, 568–575. https://doi.org/10.4028/www.scientific.net/kem.742.568
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, D., & Tröster, T. (2017). Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16065
Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., & Tröster, T. (2017). Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. Presented at the 2nd Conference & Exhibition on Light Materials, Bremen.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16071
Wang, Z., Kutz, P., & Tröster, T. (2017). Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. Presented at the 15. Bielefelder Werkstofftag, Bielefeld.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski, N., Camberg, A. A., Tröster, T., & Marten, T. (2017). Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM Conference, Schloss Hohenkammer.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski, N., Marten, T., Tröster, T., & Schulz Beenken, A. (2017). Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. Presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M., & Tröster, T. (2017). Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
LibreCat
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., & Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design, 136–142. https://doi.org/10.1016/j.matdes.2017.07.046
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., & Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design, 133, 136–142. https://doi.org/10.1016/j.matdes.2017.07.046
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., & Gonzalez, J. S. (2017). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244. https://doi.org/10.1504/ijautoc.2016.10005303
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 15962
Tröster, T., Camberg, A. A., Sanitther, B., Wang, Z., & Lauter, C. (2016). Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology. International Journal of Automotive Composites, 2, 229–243. https://doi.org/10.1504/ijautoc.2016.10005304
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16139
Schweizer, S., & Tröster, T. (2016). Recyclingkonzepte für hybride Strukturen. Carbon Composites Magazin, (2), 23.
LibreCat
2016 | Journal Article | LibreCat-ID: 16146
Grienitz, V., Tröster, T., & Meiners, S. (2016). Technikevaluation für die generative Fertigung eines Serien-Radträgers. ATZ - Automobiltechnische Zeitschrift, 36–41. https://doi.org/10.1007/s35148-016-0090-5
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 16264
Wang, Z., & Tröster, T. (2016). Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren. Presented at the EuroHybrid, Kaiserslautern.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16266
Striewe, J. A., Reuter, C., Oberkönig, C., Lauter, C., & Tröster, T. (2016). Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe. Presented at the Polymertec16, Merseburg.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16267
Striewe, J. A., Lauter, C., Reuter, C., & Tröster, T. (2016). Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites. Presented at the 19th International Conference on Composite Structures, Porto.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16268
Striewe, J. A., Reuter, C., Lauter, C., & Tröster, T. (2016). Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures. Presented at the 19th International Conference on Composite Structures, Porto.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16269
Wang, Z., Lauter, C., Löseke, J., & Tröster, T. (2016). CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications. Presented at the International Conference on Automotive Composites, ICAutoC 2016, Lisbon, Portugal.
LibreCat
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., Ahlers, D., & Tröster, T. (2016). Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer , (5).
LibreCat
2016 | Journal Article | LibreCat-ID: 16137
Lauter, C., Reuter, C., Wu, S., & Tröster, T. (2016). Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(5), 875–880. https://doi.org/doi.org/10.5281/zenodo.1124481
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 15963
Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C., Zinn, C., Wang, Z., & Dammann, C. (2016). Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites, 2, 272–298. https://doi.org/10.1504/ijautoc.2016.10005305
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, M., Dammann, C., Wang, Z., Zinn, C., Mahnken, R., Schaper, M., & Tröster, T. (2016). Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. Faszination hybrider Leichtbau 2016, Wolfsburg.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., Bobbert, M., Dammann, C., Wang, Z., Schaper, M., Meschut, G., Mahnken, R., & Tröster, T. (2016). Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. EuroHybrid, Kaiserslautern.
LibreCat
2016 | Journal Article | LibreCat-ID: 16140
Bobbert, M., Augethaler, F., Wang, Z., Tröster, T., & Meschut, G. (2016). Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications. Journal of Materials Science Research, Article 15. https://doi.org/10.5539/jmsr.v6n1p15
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., & Gonzalez, J. S. (2016). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244. https://doi.org/10.1504/ijautoc.2016.10005303
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16141
Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C., Zinn, C., Wang, Z., & Dammann, C. (2016). Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites, Article 272. https://doi.org/10.1504/ijautoc.2016.10005305
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 15964
Leuders, S., Vollmer, M., Brenne, F., Tröster, T., & Niendorf, T. (2015). Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting. Metallurgical and Materials Transactions A, 3816–3823. https://doi.org/10.1007/s11661-015-2864-x
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 16131
Marten, T., Block, H., & Tröster, T. (2015). Partial hardening of new press hardenable steels. Presented at the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2015, Toronto, Canada.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski, N., Marten, T., Block, H., & Tröster, T. (2015). Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests. Presented at the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2015, Toronto, Canada.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16135
Frantz, M., Lauter, C., Wang, Z., & Tröster, T. (2015). Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK) (pp. 139–144). Presented at the Tagung Werkstoffprüfung 2015, Bad Neuenahr: Verlag Stahleisen GmbH.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16136
Reuter, C., Tröster, T., & Lauter, C. (2015). Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna (pp. 127–132). Presented at the Tagung Werkstoffprüfung 2015, Tagung Werkstoffprüfung 2015, Bad Neuenahr: Verlag Stahleisen GmbH.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik, W., Leuders, S., Riemer, A., Tröster, T., Richard, H. A., & Niendorf, T. (2015). Fatigue life prediction for metals processed by Selective Laser Melting using finite element analyses. Presented at the TMS Annual Meeting & Exhibition, Orlando, Florida, USA.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16259
Wang, Z., Lauter, C., Sanitther, B., Frantz, M., & Tröster, T. (2015). Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding. Presented at the 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16260
Lauter, C., Wang, Z., Tröster, T., Brandis, R., & Köchling, D. (2015). Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design. Presented at the 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16261
Leuders, S., Meiners, S., Taube, A., Tröster, T., & Niendorf, T. (2015). Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting. Presented at the 13th World Conference on Titanium, San Diego, USA.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach, N., & Tröster, T. (2015). Material follows form follows function. Presented at the Hybrid-Expo, Stuttgart.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16133
Lauter, C., Wang, Z., Koke, I., & Tröster, T. (2015). Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology. 20th International Conference on Composite Materials, ICCM20, Copenhagen, Denmark.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, M., Dammann, C., Wang, Z., Zinn, C., Mahnken, R., Meschut, G., Schaper, M., & Tröster, T. (2015). Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. Hybrid-Expo, Stuttgart.
LibreCat
2015 | Conference Paper | LibreCat-ID: 23061
Lauter, C., Wang, Z., Koke, I., & Tröster, T. (2015). Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology. 20th International Conference on Composite Materials, Copenhagen.
LibreCat
2014 | Journal Article | LibreCat-ID: 15966
Niendorf, T., Leuders, S., Riemer, A., Brenne, F., Tröster, T., Richard, H. A., & Schwarze, D. (2014). Functionally Graded Alloys Obtained by Additive Manufacturing. Advanced Engineering Materials, 857–861. https://doi.org/10.1002/adem.201300579
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 15967
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014). On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting. Engineering Fracture Mechanics, 15–25. https://doi.org/10.1016/j.engfracmech.2014.03.008
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 16097
Klein, M., Hülsbusch, D., Walther, F., Bartsch, M., Hausmann, J., Frantz, M., … Tröster, T. (2014). Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids (pp. 188–193). Presented at the International Conference: Euro Hybrid Materials and Structures, Stade.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16099
Frantz, M., Lauter, C., Tröster, T., Hausmann, J., Bartsch, M., Hülsbusch, D., & Walther, F. (2014). Efficient manufacturing of hybrid structures consisting of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung. Presented at the New Developments in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung), Stuttgart.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16120
Block, H., Marten, T., & Tröster, T. (2014). Crash simulation of high strength automotive components using advanced failure models. Presented at the 4th international conference on steels in cars and trucks, Braunschweig.
LibreCat
2014 | Journal Article | LibreCat-ID: 16122
Lauter, C., Niewel, J., & Tröster, T. (2014). Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications. International Journal of Automotive Composites. https://doi.org/10.1504/ijautoc.2014.064127
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 16128
Block, H., Marten, T., Weiß Borkowski, N., & Tröster, T. (2014). Crash performance of the new press hardenable steel 15MnB6. Presented at the 3rd MATFEM conference, Hohenkammer.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16129
Reuter, C., Flore, D., Pöhler, S., Sauerland, K. H., & Tröster, T. (2014). Numerical simulation of the energy absorption of fiber-reinforced plastics. Presented at the Tagungsband NAFEMS Seminar: Simulation of Composites – A Closed Process Chain, Leipzig.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski, N., Marten, T., & Tröster, T. (2014). Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. Presented at the Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband Werkstoffprüfung 2014, Berlin.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16255
Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Niendorf, T. (2014). Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent defects on the initiation and propagation of fatigue cracks. Presented at the 25th Colloquium on Fatigue Mechanisms, Erlangen, Germany.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16256
Leuders, S., Tröster, T., Brenne, F., Riemer, A., Richard, H. A., & Niendorf, T. (2014). Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting. Presented at the American Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, San Francisco, California, USA.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16257
Leuders, S., Tröster, T., Riemer, A., Richard, H. A., & Niendorf, T. (2014). On the mechanical performance of structures manufactured by selective laser melting: Damage initiation and propagation. Presented at the Additive Manufacturing with Powder Metallurgy Conference, Orlando, Florida, USA.
LibreCat
2014 | Journal Article | LibreCat-ID: 15965
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014). On the fatigue properties of metals manufactured by selective laser melting – The role of ductility. Journal of Materials Research, 1911–1919. https://doi.org/10.1557/jmr.2014.157
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer, E., Budde, C., Tröster, T., & Pöhler, S. (2014). Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic. 101–108.
LibreCat
2014 | Journal Article | LibreCat-ID: 16125
Moritzer, E., Budde, C., Tröster, T., & Pöhler, S. (2014). Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination. Joining Plastics , 8(2), 100–105.
LibreCat
2013 | Journal Article | LibreCat-ID: 15968
Niendorf, T., Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Schwarze, D. (2013). Highly Anisotropic Steel Processed by Selective Laser Melting. Metallurgical and Materials Transactions B, 794–796. https://doi.org/10.1007/s11663-013-9875-z
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 16016
Riemer, A., Leuders, S., Richard, H. A., & Tröster, T. (2013). Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗. Materials Testing, 537–543. https://doi.org/10.3139/120.110468
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 16017
Marten, T., Block, H., Tröster, T., Gerber, T., Sikora, S., & Lenze, F.-J. (2013). Graded Lightweight Structures Through Hot Forming. Presented at the 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2013), Lulea.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16018
Lauter, C., Hochschulz, T., Frantz, M., & Tröster, T. (2013). Influences of Automotive Process Characteristics on Hybrid Structures. Presented at the 17th International Conference on Composite Structures (ICCS17), Porto .
LibreCat
2013 | Conference Paper | LibreCat-ID: 16019
Siewers, B., Lauter, C., & Tröster, T. (2013). Curing of fibre reinforced plastics by resistance heating of sheet metal in a hybrid structure. Presented at the 17th International Conference on Composite Structures (ICCS17), Porto.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16020
Tröster, T., Lauter, C., & Reuter, C. (2013). Crashworthiness of Hybrid Structures. Presented at the 4th International Conference on Integrity, Reliability and Failure (IRF2013), Funchal, Portugal.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16021
Siewers, B., Lauter, C., & Tröster, T. (2013). Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures. Presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16022
Lauter, C., Krooß, T., & Tröster, T. (2013). Manufacturing of Hybrid Structures by Prepreg Press Technology. Presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16023
Tröster, T., Lauter, C., & Reuter, C. (2013). Leichtbau mit Hybridstrukturen im Automobil. Presented at the Siegener Kolloquium “Leichtbau in Karosserie- und Fahrwerksstrukturen,” Siegen.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16024
Leuders, S., Riemer, A., Niendorf, T., Richard, H. A., & Tröster, T. (2013). On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects. Presented at the Materials Science & Technology, Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16025
Marten, T., Block, H., & Tröster, T. (2013). Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16026
Riemer, A., Leuders, S., Richard, H. A., & Tröster, T. (2013). Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen. Presented at the Herbstsitzung 2013 des DGM/DVM Arbeitskreises Materialermüdung, Dortmund.
LibreCat
2013 | Book Chapter | LibreCat-ID: 16096
Lauter, C., Tröster, T., & Reuter, C. (2013). Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications. In Advanced Composite Materials for Automotive Applications. Chichester, UK. https://doi.org/10.1002/9781118535288.ch7
LibreCat
| DOI
2012 | Journal Article | LibreCat-ID: 15981
Tröster, T., Marten, T., Thomas, D., Block, H., Lauter, C., & Thöne, M. (2012). Automobilleichtbau mit innovativen Werkstoffen und Prozessen. Forschungsforum Paderborn, 15(15/2012), 30–38.
LibreCat
2012 | Journal Article | LibreCat-ID: 15983
Lauter, C., Werneke, S., Siewers, B., & Tröster, T. (2012). Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. Lightweight Design, 53–58. https://doi.org/10.1365/s35725-012-0079-2
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15985
Reuter, C., Frantz, M., Lauter, C., Block, H., & Tröster, T. (2012). Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. Presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15987
Lauter, C., Frantz, M., Kohler, J. P., & Tröster, T. (2012). Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15988
Lauter, C., Sarrazin, M., & Tröster, T. (2012). Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. Presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal.
LibreCat
2012 | Journal Article | LibreCat-ID: 15989
Ickert, L., Thomas, D., Tröster, T., & Eckstein, L. (2012). Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. FAT-Schriftenreihe 244, (244).
LibreCat
2012 | Conference Paper | LibreCat-ID: 16004
Lauter, C., Siewers, B., Zanft, B., & Tröster, T. (2012). Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto .
LibreCat
2012 | Conference Paper | LibreCat-ID: 16007
Thöne, M., Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. Presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA.
LibreCat
2012 | Journal Article | LibreCat-ID: 16008
Riemer, A., Leuders, S., Tröster, T., & Richard, H. A. (2012). Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit.
LibreCat
2012 | Conference Paper | LibreCat-ID: 16009
Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. Presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel.
LibreCat
2012 | Report | LibreCat-ID: 16012
Tröster, T., Marten, T., Adelbert, S., & Kadim, A. (2012). P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH.
LibreCat
2012 | Journal Article | LibreCat-ID: 16015
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2012). On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue, 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.011
LibreCat
| DOI
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, H. C., Damerow, U., Lauter, C., Gorny, B., Hankeln, F., Homberg, W., Tröster, T., Maier, H. J., & Mahnken, R. (2012). Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements. Key Engineering Materials, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., Hankeln, F., Lauter, C., Schmidt, H. C., Damerow, U., Mahnken, R., Maier, H. J., Tröster, T., & Homberg, W. (2012). Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs. 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy.
LibreCat
2012 | Journal Article | LibreCat-ID: 16010
Lauter, C., Tröster, T., Brandis, R., & Gausemeier, J. (2012). Methodik für die Produktentstehung hybrider Leichtbaustrukturen. Lightweight Design, 5, 50–56. https://doi.org/10.1365/s35725-013-0137-4
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 15969
Lauter, C., Sarrazin, M., & Tröster, T. (2011). Multimaterialsysteme höchstfest verbunden. Adhäsion – Kleben und Dichten, 3/2011, 39–43.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15971
Frantz, M., Stübbe, O., Lauter, C., Schrange, J., & Tröster, T. (2011). Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15972
Thomas, D., Block, H., Tröster, T., & Krogmeier, J. (2011). Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Journal Article | LibreCat-ID: 15974
Marten, T., Lauter, C., & Tröster, T. (2011). Automobilleichtbau durch höchstfeste Multimaterialsysteme. Ingenieurspiegel, 2/2011, 67–69.
LibreCat
2011 | Journal Article | LibreCat-ID: 15975
Lauter, C., Thomas, D., Frantz, M., Niewel, J., & Tröster, T. (2011). Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, 2, 6–7.
LibreCat
2011 | Journal Article | LibreCat-ID: 15980
Lauter, C., Frantz, M., Siewers, B., & Tröster, T. (2011). Hybrid structures for tailored structural automotive components. JEC Composites Magazine, 69, 35–37.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15990
Thomas, D., Block, H., & Tröster, T. (2011). Production of load-adapted lightweight designs by partial hardening. Presented at the 3rd International Conference on Steels in Cars and Trucks (SCT), Salzburg.
LibreCat
2011 | Journal Article | LibreCat-ID: 15992
Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Tröster, T., & Maier, H. J. (2011). In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Materials Science and Engineering: A, 528(27), 7962–7967. https://doi.org/10.1016/j.msea.2011.07.026
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 15993
Lauter, C., Frantz, M., & Tröster, T. (2011). Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen. Lightweight Design, 4, 48–54.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15996
Frantz, M., Lauter, C., & Tröster, T. (2011). Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP. Presented at the 56th International Scientific Colloquium (56th IWK), Ilmenau.
LibreCat
2011 | Journal Article | LibreCat-ID: 15997
Lauter, C., Frantz, M., Marten, T., Tröster, T., Bach, G., & Seliger, G. (2011). Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (09/2011).
LibreCat
2011 | Journal Article | LibreCat-ID: 15998
Frantz, M., Lauter, C., & Tröster, T. (2011). Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (10/2011).
LibreCat
2011 | Conference Paper | LibreCat-ID: 15999
Marten, T., Tröster, T., Adelbert, S., & Kadim, A. (2011). Fluidized bed heating of blanks for the hot forming process. Presented at the 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2011), Kassel.
LibreCat
2011 | Conference Paper | LibreCat-ID: 16002
Tröster, T., & Lauter, C. (2011). Hybridstrukturen für den automobilen Leichtbau. Presented at the 3. Forum zum Thema “Multi Material Design (MMD) für Leichtbauanwendungen,” Landshut.
LibreCat
2011 | Journal Article | LibreCat-ID: 16013
Lauter, C., Frantz, M., & Tröster, T. (2011). Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen. Lightweight Design, 4, 48–54. https://doi.org/10.1365/s35725-011-0044-5
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 16000
Marten, T., Niewel, J., & Tröster, T. (2011). Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess. HTM Journal of Heat Treatment and Materials, 309–315. https://doi.org/10.3139/105.110119
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 15970
Lauter, C., Damerow, U., Frantz, M., Tröster, T., & Homberg, W. (2011). Produktionsverfahren zur Herstellung höchstfester hybrider Leichtbaustrukturen für den Einsatz im Automobil. InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15991
Lauter, C., Dau, J., Tröster, T., & Homberg, W. (2011). Manufacturing processes for automotive structures in multi-material design consisting of sheet metal and CFRP prepregs. 16th International Conference on Composite Structures (ICCS16), Porto, Portugal.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15994
Dau, J., Lauter, C., Damerow, U., Homberg, W., & Tröster, T. (2011). Multi-material systems for tailored automotive structural components. 18th International Conference on Composite Materials (ICCM18), Jeju Island, Korea.
LibreCat
2009 | Journal Article | LibreCat-ID: 15953
Böke, J., Erhardt, R., Rostek, W., & Tröster, T. (2009). Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau*. Materials Testing, 22–27. https://doi.org/10.3139/120.110002
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 15954
Tröster, T., Howe, C., Müller, M., & Rostek, W. (2008). Development status and market potential of hot formed ballistic steels. Presented at the Steels in Cars and Trucks, Wiesbaden.
LibreCat
2008 | Conference Paper | LibreCat-ID: 33878
Tröster, T., Rostek, W., Böke, J., & Erhardt, R. (2008). Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau. In DVM (Ed.), Ein wesentlicher Beitrag zur Klimadebatte (Vol. 675).
LibreCat
2007 | Book | LibreCat-ID: 33880
Tröster, T., & Berg, J. (2007). Ermittlung dynamischer Grenzformänderungsdiagramme für Karosseriestähle (Vol. P727). Verlag- und Vertriebsgesellschaft Düsseldorf.
LibreCat
2004 | Conference Paper | LibreCat-ID: 33881
Tröster, T., & Rostek, W. (2004). Innovative Warmumformung. In T. Tröster & W. Rostek (Eds.), Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung” in Fellbach (Issue 2004, pp. 51–66).
LibreCat
229 Publications
2025 | Journal Article | LibreCat-ID: 58379 |
Chalicheemalapalli Jayasankar, D., Tröster, T., & Marten, T. (2025). Optimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency. Materials, 18(3), Article 571. https://doi.org/10.3390/ma18030571
LibreCat
| DOI
| Download (ext.)
2025 | Journal Article | LibreCat-ID: 58163 |
Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., & Tröster, T. (2025). Correlation between interlaminar shear strength of CFRP and joint strength of aluminium-CFRP hybrid joints. The Journal of Adhesion, 1–26. https://doi.org/10.1080/00218464.2024.2439956
LibreCat
| DOI
| Download (ext.)
2025 | Journal Article | LibreCat-ID: 58451 |
Chalicheemalapalli Jayasankar, D., Tröster, T., Ellouz, M., & Kordisch, T. (2025). Intrinsic production of metal-carbon fiber reinforced plastic hybrid shafts using vacuum-assisted resin transfer molding. Journal of Composite Materials. https://doi.org/10.1177/00219983251313981
LibreCat
| DOI
| Download (ext.)
2025 | Conference Paper | LibreCat-ID: 59441
Devulapally, D. R., & Tröster, T. (2025). Modelling strategies for non-rotationally symmetric joints. Materials Research Proceedings, 52. https://doi.org/10.21741/9781644903551-21
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 55762
Delp, A., Wu, S., Freund, J., Scholz, R., Löbbecke, M., Tröster, T., Haubrich, J., & Walther, F. (2024). Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP. Materials, 17(8), Article 1907. https://doi.org/10.3390/ma17081907
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 55743
Irmak, H., Tinkloh, S. R., Marten, T., & Tröster, T. (2024). Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. Journal of Composites Science, 8(8), Article 316. https://doi.org/10.3390/jcs8080316
LibreCat
| DOI
2024 | Conference Abstract | LibreCat-ID: 57202
Ostermann, M., Marten, T., & Tröster, T. (2024). Prospective Life Cycle Assessment of Lightweight Structures in Vehicles for On-Demand Mobility Systems. 16th Biennial International Conference on EcoBalance. 16th Biennial International Conference on EcoBalance, Sendai, Japan.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 57537
Ostermann, M., Marten, T., & Tröster, T. (2024). Scenario-based life cycle assessment of vehicle lightweight structures. Sustainability in Product and Production Engineering. Sustainability in Product and Production Engineering, Bad Nauheim.
LibreCat
2024 | Journal Article | LibreCat-ID: 57468
Chalicheemalapalli Jayasankar, D., Gnaase, S., Lehnert, D., Walter, A., Rohling, R., & Tröster, T. (2024). Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling. Metals, 14(12), Article 1353. https://doi.org/10.3390/met14121353
LibreCat
| Files available
| DOI
2024 | Journal Article | LibreCat-ID: 57467
Lehnert, D., Bödger, C., Pabel, P., Scheidemann, C., Hemsel, T., Gnaase, S., Kostka, D., & Tröster, T. (2024). The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component. Crystals, 14(11), Article 1001. https://doi.org/10.3390/cryst14111001
LibreCat
| Files available
| DOI
2024 | Journal Article | LibreCat-ID: 56089 |
Chalicheemalapalli Jayasankar, D., Gnaase, S., Kaiser, M. A., Lehnert, D., & Tröster, T. (2024). Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications. Metals, 14(7), Article 772. https://doi.org/10.3390/met14070772
LibreCat
| DOI
| Download (ext.)
2024 | Journal Article | LibreCat-ID: 58381
Suresh, K., Kesavulu, C. R., Chalicheemalapalli Jayasankar, D., Pecharapa, W., Kagola, U. K., Tröster, T., & Jayasankar, C. K. (2024). Stokes and anti-Stokes emission characteristics of Er3+/Yb3+ co-doped zinc tellurite glasses under 377 and 1550 nm excitations for solar energy conversion application. Journal of Luminescence, 277, Article 120948. https://doi.org/10.1016/j.jlumin.2024.120948
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 55638 |
Devulapally, D. R., Martin, S., & Tröster, T. (2024). Non-rotationally symmetric joints – Mechanisms and load bearing capacity. Materials Research Proceedings. https://doi.org/10.21741/9781644903131-183
LibreCat
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 47536
Borgert, T., Milaege, D., Schweizer, S., Homberg, W., Schaper, M., & Tröster, T. (2023). Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology. International Journal of Material Forming, 16(6), Article 59. https://doi.org/10.1007/s12289-023-01785-w
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak, E. F., Hanses, H., Horwath, I., & Tröster, T. (2023). Case Study III: Challenges of lightweight design, vehicles, and rescuers. In Climate Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag. https://doi.org/10.14361/9783839463772-006
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter, J., Aydin, S., Marten, T., & Tröster, T. (2023). Analysis and Optimization of Joint Formation in Hybrid Compression Molding. 23nd International Conference on Composite Materials (ICCM23 2023), Belfast.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar, D., Stallmeister, T., Lückenkötter, J., & Tröster, T. (2023). In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding. 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway .
LibreCat
| Files available
2023 | Book Chapter | LibreCat-ID: 44502
Ostermann, M., Behm, J., Marten, T., Tröster, T., Weyer, J., Cepera, K., & Adelt, F. (2023). Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility. In H. Proff (Ed.), Towards the New Normal in Mobility. Springer Fachmedien Wiesbaden. https://doi.org/10.1007/978-3-658-39438-7_25
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 43464 |
Ostermann, M., Grenz, J., Triebus, M., Cerdas, F., Marten, T., Tröster, T., & Herrmann, C. (2023). Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures. Energies, 16(8), Article 3371. https://doi.org/10.3390/en16083371
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 44154
Lückenkötter, J., Leimbach, J. P., Stallmeister, T., Marten, T., & Tröster, T. (2023). Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector. Materials Research Proceedings, 28, 249–258. https://doi.org/10.21741/9781644902479-27
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 45782 |
Grenz, J., Ostermann, M., Käsewieter, K., Cerdas, F., Marten, T., Herrmann, C., & Tröster, T. (2023). Integrating Prospective LCA in the Development of Automotive Components. Sustainability, 15(13), Article 10041. https://doi.org/10.3390/su151310041
LibreCat
| Files available
| DOI
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 46486
Pfeifer, F., Knorr, L., Schlosser, F., Marten, T., & Tröster, T. (2023). Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes. Journal of Sustainable Development of Energy, Water and Environment Systems, 11(3), 1–20. https://doi.org/10.13044/j.sdewes.d11.0450
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 42459
Ostermann, M., Behm, J., Marten, T., & Tröster, T. (2023). NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen. WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte. WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, Stuttgart.
LibreCat
2023 | Journal Article | LibreCat-ID: 46494
Freund, J., Löbbecke, M., Delp, A., Walther, F., Wu, S., Tröster, T., & Haubrich, J. (2023). Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints. The Journal of Adhesion, 1–31. https://doi.org/10.1080/00218464.2023.2223475
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 55760
Freund, J., Lützenkirchen, I., Löbbecke, M., Delp, A., Walther, F., Wu, S., Tröster, T., & Haubrich, J. (2023). Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints. Journal of Composites Science, 7(10), Article 427. https://doi.org/10.3390/jcs7100427
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46495
Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., & Tröster, T. (2023). Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process. The Journal of Adhesion, 1–29. https://doi.org/10.1080/00218464.2023.2245758
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 48597
Wu, S., Freund, J., Delp, A., Haubrich, J., Löbbecke, M., Walther, F., & Tröster, T. (2023). Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg. 23rd International Conference on Composite Materials (ICCM23 2023).
LibreCat
2023 | Conference Abstract | LibreCat-ID: 49436
Kaiser, M. A., Reitz, A., Konrad, S., Meyer, T., Marten, T., & Tröster, T. (2023). Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess. In M. Merklein (Ed.), Workshop Warmblechumformung (Vol. 18, pp. 99–118). Lehrstuhl für Fertigungstechnologie.
LibreCat
2023 | Conference Paper | LibreCat-ID: 50742 |
Bödger, C., Gnaase, S., Lehnert, D., & Tröster, T. (2023). Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication, Austin.
LibreCat
| Files available
| Download (ext.)
2023 | Journal Article | LibreCat-ID: 37200
Gnaase, S., Niggemeyer, D., Lehnert, D., Bödger, C., & Tröster, T. (2023). Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. Crystals, 13(2), Article 157. https://doi.org/10.3390/cryst13020157
LibreCat
| Files available
| DOI
2022 | Newspaper Article | LibreCat-ID: 33001
Linnig, C., & Tröster, T. (2022). Sauber recyceln- Innovative Verfahrenskombination mit Ultraschall ermöglicht sicheren Umgang mit recycelten Carbonfasern. CU Reports.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 37258
Haller, S., Tinkloh, S. R., Tröster, T., & Brandt, R. (2022). The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element. 5th International Conference Hybrid 2022 Material & Structures. 5th International Conference Hybrid 2022 Material & Structures.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32819
Pfeifer, F., Tröster, T., Marten, T., Dietrich, A., Nacke, B., & Grundmeier, G. (2022). Investigation on hot sheet metal forming by means of a longitudinal flux inductor. Proceedings of the 6th International Conference on Steels in Cars and Trucks. 6th International Conference on Steels in Cars and Trucks, Mailand.
LibreCat
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, D., Striewe, J. A., Grydin, O., Meinderink, D., Grundmeier, G., Schaper, M., & Tröster, T. (2022). Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications. Advanced Composite Materials, 1–16. https://doi.org/10.1080/09243046.2022.2143746
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31496
Wu, T., Kruse, R., Tinkloh, S. R., Tröster, T., Zinn, W., Lauhoff, C., & Niendorf, T. (2022). Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects. Journal of Composites Science, 6(5), Article 138. https://doi.org/10.3390/jcs6050138
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34069
Schramm, B., Martin, S., Steinfelder, C., Bielak, C. R., Brosius, A., Meschut, G., Tröster, T., Wallmersperger, T., & Mergheim, J. (2022). A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining Processes, 6, Article 100133. https://doi.org/10.1016/j.jajp.2022.100133
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32814
Wu, T., Degener, S., Tinkloh, S. R., Liehr, A., Zinn, W., Nobre, J. P., Tröster, T., & Niendorf, T. (2022). Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction. Composite Structures, Article 116071. https://doi.org/10.1016/j.compstruct.2022.116071
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29951 |
Martin, S., Bielak, C. R., Bobbert, M., Tröster, T., & Meschut, G. (2022). Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area. Production Engineering. https://doi.org/10.1007/s11740-021-01103-w
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32813 |
Martin, S., Kurtusic, K., & Tröster, T. (2022). Influence of the Surrounding Sheet Geometry on a Clinched Joint. Key Engineering Materials, 927. https://doi.org/ https://doi.org/10.4028/p-09md1c
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32869
Stallmeister, T., & Tröster, T. (2022). In-Mold-Assembly of Hybrid Bending Structures by Compression Molding. Key Engineering Materials, 926, 1457–1467. https://doi.org/10.4028/p-5fxp53
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 32871
Triebus, M., Ostermann, M., Tröster, T., & Horwath, I. (2022). Advanced Automotive Components by Fiber-Metal-Laminates. Materials in Car Body Engineering - Bad Nauheim. Materials in Car Body Engineering 2022, Bad Nauheim.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 32875
Ostermann, M., Behm, J., Marten, T., Tröster, T., Weyer, J., Cepera, K., & Adelt, F. (2022). Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen nachhaltiger Mobilität. 14. Wissenschaftsforum Mobilität. 14. Wissenschaftsforum Mobilität, Duisburg.
LibreCat
2022 | Journal Article | LibreCat-ID: 30510
Delp, A., Freund, J., Wu, S., Scholz, R., Löbbecke, M., Haubrich, J., Tröster, T., & Walther, F. (2022). Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties. Composite Structures, 285, Article 115238. https://doi.org/10.1016/j.compstruct.2022.115238
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 28440 |
Triebus, M., Reitz, A., Grydin, O., Grenz, J., Schneidt, A., Erhardt, R., Tröster, T., & Schaper, M. (2021). Forming Simulation of Tailored Press Hardened Parts. 13th European LS-DYNA Conference 2021. 13th European LS-DYNA Conference 2021, Ulm.
LibreCat
| Download (ext.)
2021 | Book | LibreCat-ID: 28461
Tröster, T., Pfeifer, F., Nacke, B., & Dietrich, A. (2021). Großserientaugliche induktive Platinenerwärmung für den Warmformprozess (Vol. P1038). Forschungsvereinigung Stahlanwendung e.V.
LibreCat
2021 | Book (Editor) | LibreCat-ID: 26996
Koch, R., Gräßler, I., Zimmer, D., & Tröster, T. (Eds.). (2021). Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix (Vol. 25). Shaker Verlag.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2021). Development of a submodel technique for FFT-based solvers in micromechanical analysis. Presented at the 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online).
LibreCat
2021 | Conference Paper | LibreCat-ID: 20857
Camberg, A. A., Tröster, T., & Latuske, C. (2021). Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing. Presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg: Springer. https://doi.org/10.1007/978-3-662-62924-6_28
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20858
Camberg, A. A., Tröster, T., Wingenbach, N., Hielscher, C., & Grenz, J. (2021). A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design. Presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg: Springer. https://doi.org/10.1007/978-3-662-62924-6_30
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22518 |
Triebus, M., Gierse, J., Marten, T., & Tröster, T. (2021). A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions. IOP Conference Series: Materials Science and Engineering, Article 012052. 40th International Deep-Drawing Research Group Conference (IDDRG 2021), Virtual - Stuttgart. https://doi.org/10.1088/1757-899x/1157/1/012052
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 22859
Grothe, R., Striewe, J. A., Meinderink, D., Tröster, T., & Grundmeier, G. (2021). Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films. The Journal of Adhesion. https://doi.org/10.1080/00218464.2021.1957676
LibreCat
| DOI
2021 | Report | LibreCat-ID: 29807
Linnig, C., & Tröster, T. (2021). Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Deutsche Bundesstiftung Umwelt (DBU).
LibreCat
2021 | Journal Article | LibreCat-ID: 24131
Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., & Niendorf, T. (2021). Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components. Metals, Article 335. https://doi.org/10.3390/met11020335
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2021). The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis. Metals, Article 156. https://doi.org/10.3390/met11010156
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24130
Magnier, A., Wu, T., Tinkloh, S. R., Tröster, T., Scholtes, B., & Niendorf, T. (2021). On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites. Polymer Testing, Article 107146. https://doi.org/10.1016/j.polymertesting.2021.107146
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 21726 |
Triebus, M., & Tröster, T. (2021). HyOpt - Optimization-Based Development of Hybrid Materials. 9th NRW Nano Conference - Innovations in Materials and Applications. 9th NRW Nano Conference - Innovations in Materials and Applications, Web.
LibreCat
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 33895
Camberg, A. A., Erhart, T., & Tröster, T. (2021). A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials, 14(17), Article 5106. https://doi.org/10.3390/ma14175106
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 29293 |
Martin, S., Schütte, J., Bäumler, C., Sextro, W., & Tröster, T. (2021). Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics, 6, Article 100065. https://doi.org/10.1016/j.finmec.2021.100065
LibreCat
| DOI
| Download (ext.)
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, W.-G., Bobbert, M., Böhme, M., Dammann, C., Dittes, A., Gießmann, M., Hühne, C., Ihlemann, J., Kießling, R., Lampke, T., Lenz, P., Mahnken, R., Meschut, G., Müller, R., Nier, M., Prussak, R., Riemer, M., Sander, S., Schaper, M., … Zinn, C. (2021). Hybridprofile für Trag- und Crashstrukturen. In Intrinsische Hybridverbunde für Leichtbautragstrukturen. https://doi.org/10.1007/978-3-662-62833-1_3
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23431
Cheng, C., Wang, Z., Jin, Z., Ju, X., Schweizer, S., Tröster, T., & Mahnken, R. (2021). Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure. Composites Part B: Engineering, 224, Article 109209. https://doi.org/10.1016/j.compositesb.2021.109209
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 41508
Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., & Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A, 831, Article 142312. https://doi.org/10.1016/j.msea.2021.142312
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister, T., Martin, S., Marten, T., & Tröster, T. (2021). Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim.
LibreCat
2021 | Journal Article | LibreCat-ID: 24009
Camberg, A. A., Erhart, T., & Tröster, T. (2021). A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations. Materials, Article 5106. https://doi.org/10.3390/ma14175106
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Haase, M., Gierse, J., Zimmer, D., Tröster, T., & Schaper, M. (2021). Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section. Journal of Materials Processing Technology, Article 117183. https://doi.org/10.1016/j.jmatprotec.2021.117183
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 27700
Camberg, A. A., Andreiev, A., Pramanik, S., Hoyer, K.-P., Tröster, T., & Schaper, M. (2021). Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks. Materials Science and Engineering: A, Article 142312. https://doi.org/10.1016/j.msea.2021.142312
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 20843
Wu, T., Tinkloh, S. R., Tröster, T., & Zinn, W. (2020). Residual stress measurement in GFRP/steel hybrid components. In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. Web-Conference, Germany.
LibreCat
2020 | Conference Paper | LibreCat-ID: 20854 |
Camberg, A. A., & Tröster, T. (2020). A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter. Presented at the International Deep-Drawing Research Group (IDDRG 2020), Seoul, South Korea. https://doi.org/10.1088/1757-899X/967/1/012077
LibreCat
| DOI
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 20856 |
Camberg, A. A., Erhart, T., & Tröster, T. (2020). Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework. Presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea. https://doi.org/10.13140/RG.2.2.23924.17288
LibreCat
| DOI
| Download (ext.)
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer, S., Akbulut Irmak, E. F., & Tröster, T. (2020). Wood-based materials as a sustainable alternative for future car body construction. Future Materials, vitual.
LibreCat
2020 | Conference Paper | LibreCat-ID: 16939 |
Triebus, M., & Tröster, T. (2020). A Holistic Approach to Optimization-Based Design of Hybrid Materials. In Proceedings 4th International Conference Hybrid Materials & Structures. Web-Conference.
LibreCat
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 15490 |
Claes, L., Baumhögger, E., Rüther, T., Gierse, J., Tröster, T., & Henning, B. (2020). Reduction of systematic measurement deviation in acoustic absorption measurement systems. Fortschritte Der Akustik - DAGA 2020, 1077–1080.
LibreCat
| Files available
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2020). Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids. Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures. 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany.
LibreCat
2020 | Journal Article | LibreCat-ID: 20842
Wu, T., Tinkloh, S. R., Tröster, T., Zinn, W., & Niendorf, T. (2020). Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method. Journal of Composites Science, Article 143. https://doi.org/10.3390/jcs4030143
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar, D., Stallmeister, T., Wang, Z., & Tröster, T. (2020). MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED. In J. M. Hausmann, M. Siebert, A. von Hehl, & K. A. Weidenmann (Eds.), Hybrid 2020 Materials and Structures (pp. 167–172).
LibreCat
| Files available
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2020). A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures. Composite Structures, 238, Article 111926. https://doi.org/10.1016/j.compstruct.2020.111926
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 58383
Basavapoornima, Ch., Maheswari, T., Chalicheemalapalli Jayasankar, D., Kesavulu, C. R., Tröster, T., & Jayasankar, C. K. (2020). Thermal, structural, mechanical and 1.8 μm luminescence properties of the thulium doped Pb-K-Al-Na glasses for optical fiber amplifiers. Journal of Non-Crystalline Solids, 530, Article 119773. https://doi.org/10.1016/j.jnoncrysol.2019.119773
LibreCat
| DOI
2019 | Report | LibreCat-ID: 21210
Ahlers, D., & Tröster, T. (2019). Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn. https://doi.org/10.2314/KXP:1695591887
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer, F., Dietrich, A., Marten, T., Tröster, T., & Nacke, B. (2019). Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process. In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel (pp. 585–593). Luleå.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16794
Striewe, J. A., Thomas, R., Fischer, F., Wiens, T., & Tröster, T. (2019). Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung. Presented at the Tagung Werkstoffprüfung 2019, Sankt Augustin: DGM-Inventum GmbH .
LibreCat
2019 | Misc | LibreCat-ID: 16825
Ahlers, D., & Tröster, T. (2019). Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16827
Camberg, A. A., & Tröster, T. (2019). Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks. In 26. Sächsische Fachtagung Umformtechnik. Dresden.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2019). A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures. Presented at the 22nd International Conference on Composite Structures (ICCS22) and 1st Chinese Conference on Composite Structures (CCCS1), Wuhan.
LibreCat
2019 | Journal Article | LibreCat-ID: 15875
Camberg, A. A., Tröster, T., Bohner, F., & Tölle, J. (2019). Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications. IOP Conference Series: Materials Science and Engineering, 651, 012057. https://doi.org/10.1088/1757-899X/651/1/012057
LibreCat
| DOI
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak, E. F., & Tröster, T. (2019). Fracture prediction of additively manufactured AlSi10Mg materials. Procedia Structural Integrity, 190–197. https://doi.org/10.1016/j.prostr.2019.12.101
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak, E. F., Hanses, J., Schweizer, S., & Tröster, T. (2019). Modeling the Energy Absorption Characteristics of Wood Crash Elements. 12th European LS-DYNA Conference, Koblenz.
LibreCat
2019 | Report | LibreCat-ID: 16029
Marten, T., & Tröster, T. (2019). Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16030
Triebus, M., Bienia, S., Marten, T., Tröster, T., & Dröder, K. (2019). Press Hardening Integrated Structuring for Hybrid Components. Presented at the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden: Verlag Wissenschaftliche Scripten.
LibreCat
2019 | Book Chapter | LibreCat-ID: 13436
Camberg, A. A., Stratmann, I., & Tröster, T. (2019). TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES. In Technologies for economical and functional lightweight design. Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-58206-0_12
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., & Tröster, T. (2019). Self-sealing tool concept for RTM-processes. 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne .
LibreCat
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister, T., Chalicheemalapalli Jayasankar, D., Wang, Z., & Tröster, T. (2019). Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. Tagung Werkstoffprüfung 2019, Neu-Ulm.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16027
Camberg, A. A., Striewe, M., Tröster, T., Bohner, F., & Tölle, J. (2019). Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions. 5th MATFEM Conference. 5th MATFEM Conference, Schloss Hohenkammer.
LibreCat
2019 | Book | LibreCat-ID: 16795
Striewe, J. A., Tröster, T., Kowatz, J., Meschut, G., Grothe, R., & Grundmeier, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung.
LibreCat
2019 | Conference Paper | LibreCat-ID: 16028
Grothe, R., Striewe, J. A., Kowatz, J., Grundmeier, G., Tröster, T., & Meschut, G. (2019). Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. 39. EFB-Kolloquium, Bad Boll .
LibreCat
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg, A. A., Tröster, T., Sotirov, N., Tölle, J., & Bohner, F. (2018). Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions. In Materials Science and Engineering (MSE) Congress 2018. Darmstadt.
LibreCat
2018 | Misc | LibreCat-ID: 6594
Claes, L., Zeipert, H., Koppa, P., Tröster, T., & Henning, B. (2018). Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck.
LibreCat
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski, N., Lian, J., Camberg, A. A., Tröster, T., Münstermann, S., Bleck, W., … Richter, H. (2018). Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models. https://doi.org/10.1063/1.5035024
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16034
Camberg, A. A., & Tröster, T. (2018). Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures. In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. Bremen: DGM - Deutsche Gesellschaft für Materialkunde e.V.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, D., & Tröster, T. (2018). Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. Presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16040
Wang, Z., & Tröster, T. (2018). Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding. Presented at the 21th International Conference on Composite Structures (ICCS21), Bologna, Italy.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16042 |
Triebus, M., Tröster, T., Camberg, A. A., Bienia, S., & Dröder, K. (2018). Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures. In 15. Deutsches LS-Dyna Forum. Bamberg.
LibreCat
| Download (ext.)
2018 | Conference Paper | LibreCat-ID: 16043 |
Camberg, A. A., Tröster, T., Schneidt , A., Sotirov , N., & Tölle, J. (2018). The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming. In 15. Deutsches LS-Dyna Forum. Bamberg.
LibreCat
| Download (ext.)
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer, S., & Tröster, T. (2018). Holz als Werkstoff im Automobil. 2. Siegener Leichtbaukolloquium, Siegen.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16057
Wang, Z., & Tröster, T. (2018). Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. Presented at the 2. Siegener Leichtbaukolloquium, Siegen.
LibreCat
2018 | Journal Article | LibreCat-ID: 13439
Camberg, A. A., Bohner, F., Tölle, J., Schneidt, A., Meiners, S., & Tröster, T. (2018). Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/418/1/012018
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16052
Horwath, I., Dohmeier-Fischer, S., Weiß-Borkowski, N., & Tröster, T. (2018). FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING. INTED2018 Proceedings. 12th International Technology, Education and Development Conference, Valencia. https://doi.org/10.21125/inted.2018.1651
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., & Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing, 221–231. https://doi.org/10.1007/s40964-018-0044-4
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, D., Tröster, T., Hermann, S., Koppa, P., Gloetter, P., Schaper, M., Peters, M., Burns, M., Hengsbach, F., & Altmann, A. (2018). Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing. Contributed Papers from MS&T17. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski, N., Horwath, I., Berscheid, A., Dohmeier-Fischer, S., & Tröster, T. (2018). NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH. INTED2018 Proceedings. https://doi.org/10.21125/inted.2018.1298
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 16035
Striewe, J. A., Grothe, R., Kowatz, J., Tröster, T., Grundmeier, G., & Meschut, G. (2018). Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness. 18th European Conference on Composite Materials, Athen.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, A. A., Tröster, T., Heggemann, T., Homberg, H., Schaper, M., Dietrich, J., Bremser, W., Achterberg, L., Kabst, M., Wille, M., & Peckhaus, V. (2018). LHYBS – Lightweight Design by Novel Hybrid Materials. 8th NRW Nano Conference, Innovations in Materials and Applications, Dortmund.
LibreCat
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., Wang, Z., Tröster, T., & Schaper, M. (2018). Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM. 3rd Int Conf on Hybrid Materials and Structures, Bremen.
LibreCat
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., & Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing, 221–231. https://doi.org/10.1007/s40964-018-0044-4
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, F., Koppa, P., Holzweissig, M. J., Aydinöz, M. E., Taube, A., Hoyer, K.-P., Starykov, O., Tonn, B., Niendorf, T., Tröster, T., & Schaper, M. (2018). Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers. Progress in Additive Manufacturing, 3(4), 221–231. https://doi.org/10.1007/s40964-018-0044-4
LibreCat
| DOI
2018 | Journal Article | LibreCat-ID: 15958
Zinn, C., Bobbert, M., Dammann, C., Wang, Z., Tröster, T., Mahnken, R., Meschut, G., & Schaper, M. (2018). Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids. Composites Part B: Engineering, 173–185. https://doi.org/10.1016/j.compositesb.2018.05.030
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 6559
Claes, L., Zeipert, H., Koppa, P., Tröster, T., & Henning, B. (2017). Additively manufactured acoustic diffuser structures for ultrasonic measurement applications. In Proceedings of Meetings on Acoustics (p. 030004). Honolulu. https://doi.org/10.1121/2.0000688
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., & Tröster, T. (2017). Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating. Presented at the 5th International Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., & Tröster, T. (2017). Effects of Holes in Blanks for Press Hardening Process due to Induction Heating. Presented at the XVIII International UIE-Congress Electrotechnologies for Material Processing, Hannover.
LibreCat
2017 | Journal Article | LibreCat-ID: 15941
Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading. Composite Structures, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15942
Reuter, C., & Tröster, T. (2017). Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures, 117, 1–9. https://doi.org/10.1016/j.tws.2017.03.034
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15944
Striewe, J. A., Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled Structures, 501–508. https://doi.org/10.1016/j.tws.2017.11.011
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S., & Bleck, W. (2017). Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model. In Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. https://doi.org/10.1063/1.5007961
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 16062
Schweizer, S., Becker-Staines, A., & Tröster, T. (2017). Separation of Hybrid Structures for the Reclaim of their Single Components. Key Engineering Materials, 568–575. https://doi.org/10.4028/www.scientific.net/kem.742.568
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, D., & Tröster, T. (2017). Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16065
Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., & Tröster, T. (2017). Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. Presented at the 2nd Conference & Exhibition on Light Materials, Bremen.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16071
Wang, Z., Kutz, P., & Tröster, T. (2017). Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. Presented at the 15. Bielefelder Werkstofftag, Bielefeld.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski, N., Camberg, A. A., Tröster, T., & Marten, T. (2017). Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM Conference, Schloss Hohenkammer.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski, N., Marten, T., Tröster, T., & Schulz Beenken, A. (2017). Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. Presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen.
LibreCat
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, D., Koppa, P., Hengsbach, F., Gloetter, P., Altmann, A., Schaper, M., & Tröster, T. (2017). Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing. Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
LibreCat
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., & Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design, 136–142. https://doi.org/10.1016/j.matdes.2017.07.046
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, F., Koppa, P., Duschik, K., Holzweissig, M. J., Burns, M., Nellesen, J., Tillmann, W., Tröster, T., Hoyer, K.-P., & Schaper, M. (2017). Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties. Materials & Design, 133, 136–142. https://doi.org/10.1016/j.matdes.2017.07.046
LibreCat
| DOI
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., & Gonzalez, J. S. (2017). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244. https://doi.org/10.1504/ijautoc.2016.10005303
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 15962
Tröster, T., Camberg, A. A., Sanitther, B., Wang, Z., & Lauter, C. (2016). Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology. International Journal of Automotive Composites, 2, 229–243. https://doi.org/10.1504/ijautoc.2016.10005304
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16139
Schweizer, S., & Tröster, T. (2016). Recyclingkonzepte für hybride Strukturen. Carbon Composites Magazin, (2), 23.
LibreCat
2016 | Journal Article | LibreCat-ID: 16146
Grienitz, V., Tröster, T., & Meiners, S. (2016). Technikevaluation für die generative Fertigung eines Serien-Radträgers. ATZ - Automobiltechnische Zeitschrift, 36–41. https://doi.org/10.1007/s35148-016-0090-5
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 16264
Wang, Z., & Tröster, T. (2016). Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren. Presented at the EuroHybrid, Kaiserslautern.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16266
Striewe, J. A., Reuter, C., Oberkönig, C., Lauter, C., & Tröster, T. (2016). Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe. Presented at the Polymertec16, Merseburg.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16267
Striewe, J. A., Lauter, C., Reuter, C., & Tröster, T. (2016). Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites. Presented at the 19th International Conference on Composite Structures, Porto.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16268
Striewe, J. A., Reuter, C., Lauter, C., & Tröster, T. (2016). Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures. Presented at the 19th International Conference on Composite Structures, Porto.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16269
Wang, Z., Lauter, C., Löseke, J., & Tröster, T. (2016). CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications. Presented at the International Conference on Automotive Composites, ICAutoC 2016, Lisbon, Portugal.
LibreCat
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., Ahlers, D., & Tröster, T. (2016). Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten. Der Stahlformenbauer , (5).
LibreCat
2016 | Journal Article | LibreCat-ID: 16137
Lauter, C., Reuter, C., Wu, S., & Tröster, T. (2016). Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(5), 875–880. https://doi.org/doi.org/10.5281/zenodo.1124481
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 15963
Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C., Zinn, C., Wang, Z., & Dammann, C. (2016). Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites, 2, 272–298. https://doi.org/10.1504/ijautoc.2016.10005305
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, M., Dammann, C., Wang, Z., Zinn, C., Mahnken, R., Schaper, M., & Tröster, T. (2016). Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. Faszination hybrider Leichtbau 2016, Wolfsburg.
LibreCat
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., Bobbert, M., Dammann, C., Wang, Z., Schaper, M., Meschut, G., Mahnken, R., & Tröster, T. (2016). Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. EuroHybrid, Kaiserslautern.
LibreCat
2016 | Journal Article | LibreCat-ID: 16140
Bobbert, M., Augethaler, F., Wang, Z., Tröster, T., & Meschut, G. (2016). Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications. Journal of Materials Science Research, Article 15. https://doi.org/10.5539/jmsr.v6n1p15
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn, C., Schaper, M., & Gonzalez, J. S. (2016). Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids. International Journal of Automotive Composites, Article 244. https://doi.org/10.1504/ijautoc.2016.10005303
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 16141
Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C., Zinn, C., Wang, Z., & Dammann, C. (2016). Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding. International Journal of Automotive Composites, Article 272. https://doi.org/10.1504/ijautoc.2016.10005305
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 15964
Leuders, S., Vollmer, M., Brenne, F., Tröster, T., & Niendorf, T. (2015). Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting. Metallurgical and Materials Transactions A, 3816–3823. https://doi.org/10.1007/s11661-015-2864-x
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 16131
Marten, T., Block, H., & Tröster, T. (2015). Partial hardening of new press hardenable steels. Presented at the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2015, Toronto, Canada.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski, N., Marten, T., Block, H., & Tröster, T. (2015). Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests. Presented at the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2015, Toronto, Canada.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16135
Frantz, M., Lauter, C., Wang, Z., & Tröster, T. (2015). Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK) (pp. 139–144). Presented at the Tagung Werkstoffprüfung 2015, Bad Neuenahr: Verlag Stahleisen GmbH.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16136
Reuter, C., Tröster, T., & Lauter, C. (2015). Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna (pp. 127–132). Presented at the Tagung Werkstoffprüfung 2015, Tagung Werkstoffprüfung 2015, Bad Neuenahr: Verlag Stahleisen GmbH.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik, W., Leuders, S., Riemer, A., Tröster, T., Richard, H. A., & Niendorf, T. (2015). Fatigue life prediction for metals processed by Selective Laser Melting using finite element analyses. Presented at the TMS Annual Meeting & Exhibition, Orlando, Florida, USA.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16259
Wang, Z., Lauter, C., Sanitther, B., Frantz, M., & Tröster, T. (2015). Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding. Presented at the 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16260
Lauter, C., Wang, Z., Tröster, T., Brandis, R., & Köchling, D. (2015). Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design. Presented at the 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16261
Leuders, S., Meiners, S., Taube, A., Tröster, T., & Niendorf, T. (2015). Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting. Presented at the 13th World Conference on Titanium, San Diego, USA.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach, N., & Tröster, T. (2015). Material follows form follows function. Presented at the Hybrid-Expo, Stuttgart.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16133
Lauter, C., Wang, Z., Koke, I., & Tröster, T. (2015). Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology. 20th International Conference on Composite Materials, ICCM20, Copenhagen, Denmark.
LibreCat
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, M., Dammann, C., Wang, Z., Zinn, C., Mahnken, R., Meschut, G., Schaper, M., & Tröster, T. (2015). Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. Hybrid-Expo, Stuttgart.
LibreCat
2015 | Conference Paper | LibreCat-ID: 23061
Lauter, C., Wang, Z., Koke, I., & Tröster, T. (2015). Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology. 20th International Conference on Composite Materials, Copenhagen.
LibreCat
2014 | Journal Article | LibreCat-ID: 15966
Niendorf, T., Leuders, S., Riemer, A., Brenne, F., Tröster, T., Richard, H. A., & Schwarze, D. (2014). Functionally Graded Alloys Obtained by Additive Manufacturing. Advanced Engineering Materials, 857–861. https://doi.org/10.1002/adem.201300579
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 15967
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014). On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting. Engineering Fracture Mechanics, 15–25. https://doi.org/10.1016/j.engfracmech.2014.03.008
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 16097
Klein, M., Hülsbusch, D., Walther, F., Bartsch, M., Hausmann, J., Frantz, M., … Tröster, T. (2014). Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids (pp. 188–193). Presented at the International Conference: Euro Hybrid Materials and Structures, Stade.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16099
Frantz, M., Lauter, C., Tröster, T., Hausmann, J., Bartsch, M., Hülsbusch, D., & Walther, F. (2014). Efficient manufacturing of hybrid structures consisting of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung. Presented at the New Developments in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung), Stuttgart.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16120
Block, H., Marten, T., & Tröster, T. (2014). Crash simulation of high strength automotive components using advanced failure models. Presented at the 4th international conference on steels in cars and trucks, Braunschweig.
LibreCat
2014 | Journal Article | LibreCat-ID: 16122
Lauter, C., Niewel, J., & Tröster, T. (2014). Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications. International Journal of Automotive Composites. https://doi.org/10.1504/ijautoc.2014.064127
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 16128
Block, H., Marten, T., Weiß Borkowski, N., & Tröster, T. (2014). Crash performance of the new press hardenable steel 15MnB6. Presented at the 3rd MATFEM conference, Hohenkammer.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16129
Reuter, C., Flore, D., Pöhler, S., Sauerland, K. H., & Tröster, T. (2014). Numerical simulation of the energy absorption of fiber-reinforced plastics. Presented at the Tagungsband NAFEMS Seminar: Simulation of Composites – A Closed Process Chain, Leipzig.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski, N., Marten, T., & Tröster, T. (2014). Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. Presented at the Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband Werkstoffprüfung 2014, Berlin.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16255
Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Niendorf, T. (2014). Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent defects on the initiation and propagation of fatigue cracks. Presented at the 25th Colloquium on Fatigue Mechanisms, Erlangen, Germany.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16256
Leuders, S., Tröster, T., Brenne, F., Riemer, A., Richard, H. A., & Niendorf, T. (2014). Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting. Presented at the American Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, San Francisco, California, USA.
LibreCat
2014 | Conference Paper | LibreCat-ID: 16257
Leuders, S., Tröster, T., Riemer, A., Richard, H. A., & Niendorf, T. (2014). On the mechanical performance of structures manufactured by selective laser melting: Damage initiation and propagation. Presented at the Additive Manufacturing with Powder Metallurgy Conference, Orlando, Florida, USA.
LibreCat
2014 | Journal Article | LibreCat-ID: 15965
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014). On the fatigue properties of metals manufactured by selective laser melting – The role of ductility. Journal of Materials Research, 1911–1919. https://doi.org/10.1557/jmr.2014.157
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer, E., Budde, C., Tröster, T., & Pöhler, S. (2014). Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic. 101–108.
LibreCat
2014 | Journal Article | LibreCat-ID: 16125
Moritzer, E., Budde, C., Tröster, T., & Pöhler, S. (2014). Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination. Joining Plastics , 8(2), 100–105.
LibreCat
2013 | Journal Article | LibreCat-ID: 15968
Niendorf, T., Leuders, S., Riemer, A., Richard, H. A., Tröster, T., & Schwarze, D. (2013). Highly Anisotropic Steel Processed by Selective Laser Melting. Metallurgical and Materials Transactions B, 794–796. https://doi.org/10.1007/s11663-013-9875-z
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 16016
Riemer, A., Leuders, S., Richard, H. A., & Tröster, T. (2013). Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗. Materials Testing, 537–543. https://doi.org/10.3139/120.110468
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 16017
Marten, T., Block, H., Tröster, T., Gerber, T., Sikora, S., & Lenze, F.-J. (2013). Graded Lightweight Structures Through Hot Forming. Presented at the 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2013), Lulea.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16018
Lauter, C., Hochschulz, T., Frantz, M., & Tröster, T. (2013). Influences of Automotive Process Characteristics on Hybrid Structures. Presented at the 17th International Conference on Composite Structures (ICCS17), Porto .
LibreCat
2013 | Conference Paper | LibreCat-ID: 16019
Siewers, B., Lauter, C., & Tröster, T. (2013). Curing of fibre reinforced plastics by resistance heating of sheet metal in a hybrid structure. Presented at the 17th International Conference on Composite Structures (ICCS17), Porto.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16020
Tröster, T., Lauter, C., & Reuter, C. (2013). Crashworthiness of Hybrid Structures. Presented at the 4th International Conference on Integrity, Reliability and Failure (IRF2013), Funchal, Portugal.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16021
Siewers, B., Lauter, C., & Tröster, T. (2013). Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures. Presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16022
Lauter, C., Krooß, T., & Tröster, T. (2013). Manufacturing of Hybrid Structures by Prepreg Press Technology. Presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16023
Tröster, T., Lauter, C., & Reuter, C. (2013). Leichtbau mit Hybridstrukturen im Automobil. Presented at the Siegener Kolloquium “Leichtbau in Karosserie- und Fahrwerksstrukturen,” Siegen.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16024
Leuders, S., Riemer, A., Niendorf, T., Richard, H. A., & Tröster, T. (2013). On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects. Presented at the Materials Science & Technology, Montreal, Canada.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16025
Marten, T., Block, H., & Tröster, T. (2013). Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2013 | Conference Paper | LibreCat-ID: 16026
Riemer, A., Leuders, S., Richard, H. A., & Tröster, T. (2013). Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen. Presented at the Herbstsitzung 2013 des DGM/DVM Arbeitskreises Materialermüdung, Dortmund.
LibreCat
2013 | Book Chapter | LibreCat-ID: 16096
Lauter, C., Tröster, T., & Reuter, C. (2013). Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications. In Advanced Composite Materials for Automotive Applications. Chichester, UK. https://doi.org/10.1002/9781118535288.ch7
LibreCat
| DOI
2012 | Journal Article | LibreCat-ID: 15981
Tröster, T., Marten, T., Thomas, D., Block, H., Lauter, C., & Thöne, M. (2012). Automobilleichtbau mit innovativen Werkstoffen und Prozessen. Forschungsforum Paderborn, 15(15/2012), 30–38.
LibreCat
2012 | Journal Article | LibreCat-ID: 15983
Lauter, C., Werneke, S., Siewers, B., & Tröster, T. (2012). Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. Lightweight Design, 53–58. https://doi.org/10.1365/s35725-012-0079-2
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15985
Reuter, C., Frantz, M., Lauter, C., Block, H., & Tröster, T. (2012). Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. Presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15987
Lauter, C., Frantz, M., Kohler, J. P., & Tröster, T. (2012). Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy.
LibreCat
2012 | Conference Paper | LibreCat-ID: 15988
Lauter, C., Sarrazin, M., & Tröster, T. (2012). Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. Presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal.
LibreCat
2012 | Journal Article | LibreCat-ID: 15989
Ickert, L., Thomas, D., Tröster, T., & Eckstein, L. (2012). Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. FAT-Schriftenreihe 244, (244).
LibreCat
2012 | Conference Paper | LibreCat-ID: 16004
Lauter, C., Siewers, B., Zanft, B., & Tröster, T. (2012). Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto .
LibreCat
2012 | Conference Paper | LibreCat-ID: 16007
Thöne, M., Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. Presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA.
LibreCat
2012 | Journal Article | LibreCat-ID: 16008
Riemer, A., Leuders, S., Tröster, T., & Richard, H. A. (2012). Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit.
LibreCat
2012 | Conference Paper | LibreCat-ID: 16009
Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. Presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel.
LibreCat
2012 | Report | LibreCat-ID: 16012
Tröster, T., Marten, T., Adelbert, S., & Kadim, A. (2012). P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH.
LibreCat
2012 | Journal Article | LibreCat-ID: 16015
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2012). On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue, 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.011
LibreCat
| DOI
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, H. C., Damerow, U., Lauter, C., Gorny, B., Hankeln, F., Homberg, W., Tröster, T., Maier, H. J., & Mahnken, R. (2012). Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements. Key Engineering Materials, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., Hankeln, F., Lauter, C., Schmidt, H. C., Damerow, U., Mahnken, R., Maier, H. J., Tröster, T., & Homberg, W. (2012). Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs. 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy.
LibreCat
2012 | Journal Article | LibreCat-ID: 16010
Lauter, C., Tröster, T., Brandis, R., & Gausemeier, J. (2012). Methodik für die Produktentstehung hybrider Leichtbaustrukturen. Lightweight Design, 5, 50–56. https://doi.org/10.1365/s35725-013-0137-4
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 15969
Lauter, C., Sarrazin, M., & Tröster, T. (2011). Multimaterialsysteme höchstfest verbunden. Adhäsion – Kleben und Dichten, 3/2011, 39–43.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15971
Frantz, M., Stübbe, O., Lauter, C., Schrange, J., & Tröster, T. (2011). Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15972
Thomas, D., Block, H., Tröster, T., & Krogmeier, J. (2011). Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. Presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Journal Article | LibreCat-ID: 15974
Marten, T., Lauter, C., & Tröster, T. (2011). Automobilleichtbau durch höchstfeste Multimaterialsysteme. Ingenieurspiegel, 2/2011, 67–69.
LibreCat
2011 | Journal Article | LibreCat-ID: 15975
Lauter, C., Thomas, D., Frantz, M., Niewel, J., & Tröster, T. (2011). Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen. Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, 2, 6–7.
LibreCat
2011 | Journal Article | LibreCat-ID: 15980
Lauter, C., Frantz, M., Siewers, B., & Tröster, T. (2011). Hybrid structures for tailored structural automotive components. JEC Composites Magazine, 69, 35–37.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15990
Thomas, D., Block, H., & Tröster, T. (2011). Production of load-adapted lightweight designs by partial hardening. Presented at the 3rd International Conference on Steels in Cars and Trucks (SCT), Salzburg.
LibreCat
2011 | Journal Article | LibreCat-ID: 15992
Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Tröster, T., & Maier, H. J. (2011). In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting. Materials Science and Engineering: A, 528(27), 7962–7967. https://doi.org/10.1016/j.msea.2011.07.026
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 15993
Lauter, C., Frantz, M., & Tröster, T. (2011). Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen. Lightweight Design, 4, 48–54.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15996
Frantz, M., Lauter, C., & Tröster, T. (2011). Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP. Presented at the 56th International Scientific Colloquium (56th IWK), Ilmenau.
LibreCat
2011 | Journal Article | LibreCat-ID: 15997
Lauter, C., Frantz, M., Marten, T., Tröster, T., Bach, G., & Seliger, G. (2011). Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (09/2011).
LibreCat
2011 | Journal Article | LibreCat-ID: 15998
Frantz, M., Lauter, C., & Tröster, T. (2011). Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen. Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (10/2011).
LibreCat
2011 | Conference Paper | LibreCat-ID: 15999
Marten, T., Tröster, T., Adelbert, S., & Kadim, A. (2011). Fluidized bed heating of blanks for the hot forming process. Presented at the 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2011), Kassel.
LibreCat
2011 | Conference Paper | LibreCat-ID: 16002
Tröster, T., & Lauter, C. (2011). Hybridstrukturen für den automobilen Leichtbau. Presented at the 3. Forum zum Thema “Multi Material Design (MMD) für Leichtbauanwendungen,” Landshut.
LibreCat
2011 | Journal Article | LibreCat-ID: 16013
Lauter, C., Frantz, M., & Tröster, T. (2011). Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen. Lightweight Design, 4, 48–54. https://doi.org/10.1365/s35725-011-0044-5
LibreCat
| DOI
2011 | Journal Article | LibreCat-ID: 16000
Marten, T., Niewel, J., & Tröster, T. (2011). Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess. HTM Journal of Heat Treatment and Materials, 309–315. https://doi.org/10.3139/105.110119
LibreCat
| DOI
2011 | Conference Paper | LibreCat-ID: 15970
Lauter, C., Damerow, U., Frantz, M., Tröster, T., & Homberg, W. (2011). Produktionsverfahren zur Herstellung höchstfester hybrider Leichtbaustrukturen für den Einsatz im Automobil. InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15991
Lauter, C., Dau, J., Tröster, T., & Homberg, W. (2011). Manufacturing processes for automotive structures in multi-material design consisting of sheet metal and CFRP prepregs. 16th International Conference on Composite Structures (ICCS16), Porto, Portugal.
LibreCat
2011 | Conference Paper | LibreCat-ID: 15994
Dau, J., Lauter, C., Damerow, U., Homberg, W., & Tröster, T. (2011). Multi-material systems for tailored automotive structural components. 18th International Conference on Composite Materials (ICCM18), Jeju Island, Korea.
LibreCat
2009 | Journal Article | LibreCat-ID: 15953
Böke, J., Erhardt, R., Rostek, W., & Tröster, T. (2009). Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau*. Materials Testing, 22–27. https://doi.org/10.3139/120.110002
LibreCat
| DOI
2008 | Conference Paper | LibreCat-ID: 15954
Tröster, T., Howe, C., Müller, M., & Rostek, W. (2008). Development status and market potential of hot formed ballistic steels. Presented at the Steels in Cars and Trucks, Wiesbaden.
LibreCat
2008 | Conference Paper | LibreCat-ID: 33878
Tröster, T., Rostek, W., Böke, J., & Erhardt, R. (2008). Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau. In DVM (Ed.), Ein wesentlicher Beitrag zur Klimadebatte (Vol. 675).
LibreCat
2007 | Book | LibreCat-ID: 33880
Tröster, T., & Berg, J. (2007). Ermittlung dynamischer Grenzformänderungsdiagramme für Karosseriestähle (Vol. P727). Verlag- und Vertriebsgesellschaft Düsseldorf.
LibreCat
2004 | Conference Paper | LibreCat-ID: 33881
Tröster, T., & Rostek, W. (2004). Innovative Warmumformung. In T. Tröster & W. Rostek (Eds.), Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung” in Fellbach (Issue 2004, pp. 51–66).
LibreCat