Thomas Tröster

thomas.troester@uni-paderborn.de
ID
553

229 Publications

Mark all

[229]
2025 | Journal Article | LibreCat-ID: 58379 | OA
Chalicheemalapalli Jayasankar, Deviprasad, Thomas Tröster, and Thorsten Marten. “Optimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency.” Materials 18, no. 3 (2025). https://doi.org/10.3390/ma18030571.
LibreCat | DOI | Download (ext.)
 
[228]
2025 | Journal Article | LibreCat-ID: 58163 | OA
Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich, Miriam Löbbecke, and Thomas Tröster. “Correlation between Interlaminar Shear Strength of CFRP and Joint Strength of Aluminium-CFRP Hybrid Joints.” The Journal of Adhesion, 2025, 1–26. https://doi.org/10.1080/00218464.2024.2439956.
LibreCat | DOI | Download (ext.)
 
[227]
2025 | Journal Article | LibreCat-ID: 58451 | OA
Chalicheemalapalli Jayasankar, Deviprasad, Thomas Tröster, Manel Ellouz, and Thomas Kordisch. “Intrinsic Production of Metal-Carbon Fiber Reinforced Plastic Hybrid Shafts Using Vacuum-Assisted Resin Transfer Molding.” Journal of Composite Materials, 2025. https://doi.org/10.1177/00219983251313981.
LibreCat | DOI | Download (ext.)
 
[226]
2025 | Conference Paper | LibreCat-ID: 59441
Devulapally, Deekshith Reddy, and Thomas Tröster. “Modelling Strategies for Non-Rotationally Symmetric Joints.” In Materials Research Proceedings, Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-21.
LibreCat | DOI
 
[225]
2024 | Journal Article | LibreCat-ID: 55762
Delp, Alexander, Shuang Wu, Jonathan Freund, Ronja Scholz, Miriam Löbbecke, Thomas Tröster, Jan Haubrich, and Frank Walther. “Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP.” Materials 17, no. 8 (2024). https://doi.org/10.3390/ma17081907.
LibreCat | DOI
 
[224]
2024 | Journal Article | LibreCat-ID: 55743
Irmak, Hayrettin, Steffen Rainer Tinkloh, Thorsten Marten, and Thomas Tröster. “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure.” Journal of Composites Science 8, no. 8 (2024). https://doi.org/10.3390/jcs8080316.
LibreCat | DOI
 
[223]
2024 | Conference Abstract | LibreCat-ID: 57202
Ostermann, Moritz, Thorsten Marten, and Thomas Tröster. “Prospective Life Cycle Assessment of Lightweight Structures in Vehicles for On-Demand Mobility Systems.” In 16th Biennial International Conference on EcoBalance. Sendai, Japan, 2024.
LibreCat
 
[222]
2024 | Conference Abstract | LibreCat-ID: 57537
Ostermann, Moritz, Thorsten Marten, and Thomas Tröster. “Scenario-Based Life Cycle Assessment of Vehicle Lightweight Structures.” In Sustainability in Product and Production Engineering. Bad Nauheim: Automotive Circle, 2024.
LibreCat
 
[221]
2024 | Journal Article | LibreCat-ID: 57468
Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Dennis Lehnert, Artur Walter, Robin Rohling, and Thomas Tröster. “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling.” Metals 14, no. 12 (2024). https://doi.org/10.3390/met14121353.
LibreCat | Files available | DOI
 
[220]
2024 | Journal Article | LibreCat-ID: 57467
Lehnert, Dennis, Christian Bödger, Philipp Pabel, Claus Scheidemann, Tobias Hemsel, Stefan Gnaase, David Kostka, and Thomas Tröster. “The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component.” Crystals 14, no. 11 (2024). https://doi.org/10.3390/cryst14111001.
LibreCat | Files available | DOI
 
[219]
2024 | Journal Article | LibreCat-ID: 56089 | OA
Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Maximilian Alexander Kaiser, Dennis Lehnert, and Thomas Tröster. “Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications.” Metals 14, no. 7 (2024). https://doi.org/10.3390/met14070772.
LibreCat | DOI | Download (ext.)
 
[218]
2024 | Journal Article | LibreCat-ID: 58381
Suresh, Keenatampalle, C.R. Kesavulu, Deviprasad Chalicheemalapalli Jayasankar, Wisanu Pecharapa, Upendra Kumar Kagola, Thomas Tröster, and C.K. Jayasankar. “Stokes and Anti-Stokes Emission Characteristics of Er3+/Yb3+ Co-Doped Zinc Tellurite Glasses under 377 and 1550 Nm Excitations for Solar Energy Conversion Application.” Journal of Luminescence 277 (2024). https://doi.org/10.1016/j.jlumin.2024.120948.
LibreCat | DOI
 
[217]
2024 | Conference Paper | LibreCat-ID: 55638 | OA
Devulapally, Deekshith Reddy, Sven Martin, and Thomas Tröster. “Non-Rotationally Symmetric Joints – Mechanisms and Load Bearing Capacity.” In Materials Research Proceedings. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-183.
LibreCat | DOI | Download (ext.)
 
[216]
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[215]
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak, Emine Fulya, Hendrik Hanses, Ilona Horwath, and Thomas Tröster. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.” In Climate Protection, Resource Efficiency, and Sustainable Engineering. Bielefeld, Germany: transcript Verlag, 2023. https://doi.org/10.14361/9783839463772-006.
LibreCat | DOI
 
[214]
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter, Julian, Simon Aydin, Thorsten Marten, and Thomas Tröster. “Analysis and Optimization of Joint Formation in Hybrid Compression Molding,” 2023.
LibreCat
 
[213]
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar, Deviprasad, Tim Stallmeister, Julian Lückenkötter, and Thomas Tröster. “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” 2023.
LibreCat | Files available
 
[212]
2023 | Book Chapter | LibreCat-ID: 44502
Ostermann, Moritz, Jonathan Behm, Thorsten Marten, Thomas Tröster, Johannes Weyer, Kay Cepera, and Fabian Adelt. “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility.” In Towards the New Normal in Mobility, edited by Heike Proff. Wiesbaden: Springer Fachmedien Wiesbaden, 2023. https://doi.org/10.1007/978-3-658-39438-7_25.
LibreCat | DOI
 
[211]
2023 | Journal Article | LibreCat-ID: 43464 | OA
Ostermann, Moritz, Julian Grenz, Marcel Triebus, Felipe Cerdas, Thorsten Marten, Thomas Tröster, and Christoph Herrmann. “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures.” Energies 16, no. 8 (2023). https://doi.org/10.3390/en16083371.
LibreCat | DOI | Download (ext.)
 
[210]
2023 | Conference Paper | LibreCat-ID: 44154
Lückenkötter, Julian, J.P. Leimbach, Tim Stallmeister, Thorsten Marten, and Thomas Tröster. “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector.” In Materials Research Proceedings, 28:249–58. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-27.
LibreCat | DOI
 
[209]
2023 | Journal Article | LibreCat-ID: 45782 | OA
Grenz, Julian, Moritz Ostermann, Karoline Käsewieter, Felipe Cerdas, Thorsten Marten, Christoph Herrmann, and Thomas Tröster. “Integrating Prospective LCA in the Development of Automotive Components.” Sustainability 15, no. 13 (2023). https://doi.org/10.3390/su151310041.
LibreCat | Files available | DOI | Download (ext.)
 
[208]
2023 | Journal Article | LibreCat-ID: 46486
Pfeifer, Florian, Lukas Knorr, Florian Schlosser, Thorsten Marten, and Thomas Tröster. “Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes.” Journal of Sustainable Development of Energy, Water and Environment Systems 11, no. 3 (2023): 1–20. https://doi.org/10.13044/j.sdewes.d11.0450.
LibreCat | DOI
 
[207]
2023 | Conference Abstract | LibreCat-ID: 42459
Ostermann, Moritz, Jonathan Behm, Thorsten Marten, and Thomas Tröster. “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen.” In WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte. Stuttgart, Germany, 2023.
LibreCat
 
[206]
2023 | Journal Article | LibreCat-ID: 46494
Freund, Jonathan, Miriam Löbbecke, Alexander Delp, Frank Walther, Shuang Wu, Thomas Tröster, and Jan Haubrich. “Relationship between Laser-Generated Micro- and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.” The Journal of Adhesion, 2023, 1–31. https://doi.org/10.1080/00218464.2023.2223475.
LibreCat | DOI
 
[205]
2023 | Journal Article | LibreCat-ID: 55760
Freund, Jonathan, Isabel Lützenkirchen, Miriam Löbbecke, Alexander Delp, Frank Walther, Shuang Wu, Thomas Tröster, and Jan Haubrich. “Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints.” Journal of Composites Science 7, no. 10 (2023). https://doi.org/10.3390/jcs7100427.
LibreCat | DOI
 
[204]
2023 | Journal Article | LibreCat-ID: 46495
Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich, Miriam Löbbecke, and Thomas Tröster. “Adhesion Properties of the Hybrid System Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” The Journal of Adhesion, 2023, 1–29. https://doi.org/10.1080/00218464.2023.2245758.
LibreCat | DOI
 
[203]
2023 | Conference Paper | LibreCat-ID: 48597
Wu, Shuang, Jonathan Freund, Alexander Delp, Jan Haubrich, Miriam Löbbecke, Frank Walther, and Thomas Tröster. “Intrinsic Forming of Hybrid Parts Made of Laser-Structured Aluminium Sheet and CFRP-Prepreg,” 2023.
LibreCat
 
[202]
2023 | Conference Abstract | LibreCat-ID: 49436
Kaiser, Maximilian Alexander, Alexander Reitz, Stefan Konrad, Thomas Meyer, Thorsten Marten, and Thomas Tröster. “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.” In Workshop Warmblechumformung, edited by Marion Merklein, 18:99–118. Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung. erlangen: Lehrstuhl für Fertigungstechnologie, 2023.
LibreCat
 
[201]
2023 | Conference Paper | LibreCat-ID: 50742 | OA
Bödger, Christian, Stefan Gnaase, Dennis Lehnert, and Thomas Tröster. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.
LibreCat | Files available | Download (ext.)
 
[200]
2023 | Journal Article | LibreCat-ID: 37200
Gnaase, Stefan, Dennis Niggemeyer, Dennis Lehnert, Christian Bödger, and Thomas Tröster. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.” Crystals 13, no. 2 (2023). https://doi.org/10.3390/cryst13020157.
LibreCat | Files available | DOI
 
[199]
2022 | Newspaper Article | LibreCat-ID: 33001
Linnig, Caterina, and Thomas Tröster. “Sauber Recyceln- Innovative Verfahrenskombination Mit Ultraschall Ermöglicht Sicheren Umgang Mit Recycelten Carbonfasern.” CU Reports, 2022.
LibreCat
 
[198]
2022 | Conference Abstract | LibreCat-ID: 37258
Haller, Sebastian, Steffen Rainer Tinkloh, Thomas Tröster, and Robert Brandt. “The Environmental Impact on the Strain Rate Dependent Energy Absorption Capability of a Hybrid Crash Absorber Element.” In 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
 
[197]
2022 | Conference Paper | LibreCat-ID: 32819
Pfeifer, Florian, Thomas Tröster, Thorsten Marten, André Dietrich, Bernard Nacke, and Guido Grundmeier. “Investigation on Hot Sheet Metal Forming by Means of a Longitudinal Flux Inductor.” In Proceedings of the 6th International Conference on Steels in Cars and Trucks, 2022.
LibreCat
 
[196]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, 2022, 1–16. https://doi.org/10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[195]
2022 | Journal Article | LibreCat-ID: 31496
Wu, Tao, Roland Kruse, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, Christian Lauhoff, and Thomas Niendorf. “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects.” Journal of Composites Science 6, no. 5 (2022). https://doi.org/10.3390/jcs6050138.
LibreCat | DOI
 
[194]
2022 | Journal Article | LibreCat-ID: 34069
Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100133.
LibreCat | DOI
 
[193]
2022 | Journal Article | LibreCat-ID: 32814
Wu, T., S. Degener, Steffen Rainer Tinkloh, A. Liehr, W. Zinn, J.P. Nobre, Thomas Tröster, and T. Niendorf. “Characterization of Residual Stresses in Fiber Metal Laminate Interfaces - A Combined Approach Applying Hole-Drilling Method and Energy-Dispersive X-Ray Diffraction.” Composite Structures, 2022. https://doi.org/10.1016/j.compstruct.2022.116071.
LibreCat | DOI
 
[192]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin, Sven, Christian Roman Bielak, Mathias Bobbert, Thomas Tröster, and Gerson Meschut. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, 2022. https://doi.org/10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[191]
2022 | Journal Article | LibreCat-ID: 32813 | OA
Martin, Sven, Kristijan Kurtusic, and Thomas Tröster. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.” Key Engineering Materials 927 (2022). https://doi.org/  https://doi.org/10.4028/p-09md1c.
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Journal Article | LibreCat-ID: 32869
Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.” Key Engineering Materials 926 (2022): 1457–67. https://doi.org/10.4028/p-5fxp53.
LibreCat | DOI
 
[189]
2022 | Conference Abstract | LibreCat-ID: 32871
Triebus, Marcel, Moritz Ostermann, Thomas Tröster, and Ilona Horwath. “Advanced Automotive Components by Fiber-Metal-Laminates.” In Materials in Car Body Engineering - Bad Nauheim, 2022.
LibreCat
 
[188]
2022 | Conference Abstract | LibreCat-ID: 32875
Ostermann, Moritz, Jonathan Behm, Thorsten Marten, Thomas Tröster, Johannes Weyer, Kay Cepera, and Fiabian Adelt. “Individualisierung Des ÖPNV - Integration Technischer Und Sozialer Dimensionen Nachhaltiger Mobilität.” In 14. Wissenschaftsforum Mobilität. Duisburg, Germany, 2022.
LibreCat
 
[187]
2022 | Journal Article | LibreCat-ID: 30510
Delp, Alexander, Jonathan Freund, Shuang Wu, Ronja Scholz, Miriam Löbbecke, Jan Haubrich, Thomas Tröster, and Frank Walther. “Influence of Laser-Generated Surface Micro-Structuring on the Intrinsically Bonded Hybrid System CFRP-EN AW 6082-T6 on Its Corrosion Properties.” Composite Structures 285 (2022). https://doi.org/10.1016/j.compstruct.2022.115238.
LibreCat | DOI
 
[186]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus, Marcel, Alexander Reitz, Olexandr Grydin, Julian Grenz, Andreas Schneidt, Rüdiger Erhardt, Thomas Tröster, and Mirko Schaper. “Forming Simulation of Tailored Press Hardened Parts.” In 13th European LS-DYNA Conference 2021, 2021.
LibreCat | Download (ext.)
 
[185]
2021 | Book | LibreCat-ID: 28461
Tröster, Thomas, Florian Pfeifer, Bernard Nacke, and André Dietrich. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Vol. P1038. FOSTA-Berichte. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
 
[184]
2021 | Book (Editor) | LibreCat-ID: 26996
Koch, Rainer, Iris Gräßler, Detmar Zimmer, and Thomas Tröster, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol. 25. Forschungsberichte des Direct Manufacturing Research Centers (DMRC). Düren: Shaker Verlag, 2021.
LibreCat
 
[183]
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis,” 2021.
LibreCat
 
[182]
2021 | Conference Paper | LibreCat-ID: 20857
Camberg, Alan Adam, Thomas Tröster, and Clemens Latuske. “Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing.” Springer, 2021. https://doi.org/10.1007/978-3-662-62924-6_28.
LibreCat | DOI
 
[181]
2021 | Conference Paper | LibreCat-ID: 20858
Camberg, Alan Adam, Thomas Tröster, Nils Wingenbach, Christian Hielscher, and Julian Grenz. “A New Numerical Method for Potential Anaylsis and Design of Hybrid Components from Full Vehicle Simulations: Implementation and Component Design.” Springer, 2021. https://doi.org/10.1007/978-3-662-62924-6_30.
LibreCat | DOI
 
[180]
2021 | Journal Article | LibreCat-ID: 22518 | OA
Triebus, Marcel, Jan Gierse, Thorsten Marten, and Thomas Tröster. “A New Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1157/1/012052.
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 22859
Grothe, Richard, Jan Andre Striewe, Dennis Meinderink, Thomas Tröster, and Guido Grundmeier. “Enhanced Corrosion Resistance of Adhesive/Galvanised Steel Interfaces by Nanocrystalline ZnO Thin Film Deposition and Molecular Adhesion Promoting Films.” The Journal of Adhesion, 2021. https://doi.org/10.1080/00218464.2021.1957676.
LibreCat | DOI
 
[178]
2021 | Report | LibreCat-ID: 29807
Linnig, Caterina, and Thomas Tröster. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Osnabrück: Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat
 
[177]
2021 | Journal Article | LibreCat-ID: 24131
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas Niendorf. “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components.” Metals, 2021. https://doi.org/10.3390/met11020335.
LibreCat | DOI
 
[176]
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis.” Metals, 2021. https://doi.org/10.3390/met11010156.
LibreCat | DOI
 
[175]
2021 | Journal Article | LibreCat-ID: 24130
Magnier, A., T. Wu, Steffen Rainer Tinkloh, Thomas Tröster, B. Scholtes, and T. Niendorf. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.” Polymer Testing, 2021. https://doi.org/10.1016/j.polymertesting.2021.107146.
LibreCat | DOI
 
[174]
2021 | Conference Abstract | LibreCat-ID: 21726 | OA
Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development of Hybrid Materials.” In 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
LibreCat | Download (ext.)
 
[173]
2021 | Journal Article | LibreCat-ID: 33895
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials 14, no. 17 (2021). https://doi.org/10.3390/ma14175106.
LibreCat | DOI
 
[172]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin, Sven, Jan Schütte, C. Bäumler, Walter Sextro, and Thomas Tröster. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics 6 (2021). https://doi.org/10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[171]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G, Mathias Bobbert, Marcus Böhme, Christian Dammann, Axel Dittes, Mina Gießmann, Christian Hühne, et al. “Hybridprofile Für Trag- Und Crashstrukturen.” In Intrinsische Hybridverbunde Für Leichtbautragstrukturen. Berlin, Heidelberg, 2021. https://doi.org/10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[170]
2021 | Journal Article | LibreCat-ID: 23431
Cheng, C., Z. Wang, Z. Jin, X. Ju, Swetlana Schweizer, Thomas Tröster, and Rolf Mahnken. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.” Composites Part B: Engineering 224 (2021). https://doi.org/10.1016/j.compositesb.2021.109209.
LibreCat | DOI
 
[169]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A 831 (2021). https://doi.org/10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[168]
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister, Tim, Sven Martin, Thorsten Marten, and Thomas Tröster. “Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases,” 2021.
LibreCat
 
[167]
2021 | Journal Article | LibreCat-ID: 24009
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials, 2021. https://doi.org/10.3390/ma14175106.
LibreCat | DOI
 
[166]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[165]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[164]
2020 | Conference Paper | LibreCat-ID: 20843
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, and Wolfgang Zinn. “Residual Stress Measurement in GFRP/Steel Hybrid Components.” In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[163]
2020 | Conference Paper | LibreCat-ID: 20854 | OA
Camberg, Alan Adam, and Thomas Tröster. “A Simplified Method for the Evaluation of the Layer Compression Test Using One 3D Digital Image Correlation System and Considering the Material Anisotropy by the Equibiaxial Lankford Parameter.” IOP Conference Series: Materials Science and Engineering, 2020. https://doi.org/10.1088/1757-899X/967/1/012077.
LibreCat | DOI | Download (ext.)
 
[162]
2020 | Conference Paper | LibreCat-ID: 20856 | OA
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “Predicting Fracture at Non-Isothermal Forming Conditions: A Temperature Dependent Extension of the LS-DYNA GISSMO Fracture Indicator Framework,” 2020. https://doi.org/10.13140/RG.2.2.23924.17288.
LibreCat | DOI | Download (ext.)
 
[161]
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer, Swetlana, Emine Fulya Akbulut Irmak, and Thomas Tröster. “Wood-Based Materials as a Sustainable Alternative for Future Car Body Construction.” Automotive Circle, 2020.
LibreCat
 
[160]
2020 | Conference Paper | LibreCat-ID: 16939 | OA
Triebus, Marcel, and Thomas Tröster. “A Holistic Approach to Optimization-Based Design of Hybrid Materials.” In Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
LibreCat | Download (ext.)
 
[159]
2020 | Conference Paper | LibreCat-ID: 15490 | OA
Claes, Leander, Elmar Baumhögger, Torben Rüther, Jan Gierse, Thomas Tröster, and Bernd Henning. “Reduction of Systematic Measurement Deviation in Acoustic Absorption Measurement Systems.” In Fortschritte Der Akustik - DAGA 2020, 1077–80, 2020.
LibreCat | Files available
 
[158]
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Numerical Investigation of the Hole-Drilling Method Applied to Intrinsic Manufactured Metal-CFRP Hybrids.” In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[157]
2020 | Journal Article | LibreCat-ID: 20842
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas Niendorf. “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method.” Journal of Composites Science, 2020. https://doi.org/10.3390/jcs4030143.
LibreCat | DOI
 
[156]
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar, Deviprasad, Tim Stallmeister, Zheng Wang, and Thomas Tröster. “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED.” In Hybrid 2020 Materials and Structures, edited by Joachim M Hausmann, Marc Siebert, Axel von Hehl, and Kay André Weidenmann, 167–72, 2020.
LibreCat | Files available
 
[155]
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “A Micromechanical-Based Finite Element Simulation of Process-Induced Residual Stresses in Metal-CFRP-Hybrid Structures.” Composite Structures 238 (2020). https://doi.org/10.1016/j.compstruct.2020.111926.
LibreCat | DOI
 
[154]
2020 | Journal Article | LibreCat-ID: 58383
Basavapoornima, Ch., T. Maheswari, Deviprasad Chalicheemalapalli Jayasankar, C.R. Kesavulu, Thomas Tröster, and C.K. Jayasankar. “Thermal, Structural, Mechanical and 1.8 μm Luminescence Properties of the Thulium Doped Pb-K-Al-Na Glasses for Optical Fiber Amplifiers.” Journal of Non-Crystalline Solids 530 (2020). https://doi.org/10.1016/j.jnoncrysol.2019.119773.
LibreCat | DOI
 
[153]
2019 | Report | LibreCat-ID: 21210
Ahlers, Dominik, and Thomas Tröster. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn, 2019. https://doi.org/10.2314/KXP:1695591887.
LibreCat | DOI
 
[152]
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer, Florian, André Dietrich, Thorsten Marten, Thomas Tröster, and Bernard Nacke. “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process.” In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 585–93, 2019.
LibreCat
 
[151]
2019 | Conference Paper | LibreCat-ID: 16794
Striewe, Jan André, Robert Thomas, Fabian Fischer, Timo Wiens, and Thomas Tröster. “Energieabsorptions- Und Versagensverhalten Eines Automobilen Seitenschwellers Mit Lokaler Verstärkung Aus Kohlenstofffaserverstärktem Kunststoff Nach Alterung.” Sankt Augustin: DGM-Inventum GmbH , 2019.
LibreCat
 
[150]
2019 | Misc | LibreCat-ID: 16825
Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM 2019 Congress & Exhibition – SIS: Optimising the Properties of AM Parts Using Hot Isostatic Pressing. Maastricht: EuroPM, 2019.
LibreCat
 
[149]
2019 | Conference Paper | LibreCat-ID: 16827
Camberg, Alan Adam, and Thomas Tröster. “Challenges in Fracture Modeling under Non-Isothermal Forming Conditions Using the Example of a New Forming Process for Aluminum Blanks.” In 26. Sächsische Fachtagung Umformtechnik, 2019.
LibreCat
 
[148]
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “A Micromechanical Based Finite Element Simulation of Process Induced Residual Stresses in Metal-CFRP-Hybrid Structures,” 2019.
LibreCat
 
[147]
2019 | Journal Article | LibreCat-ID: 15875
Camberg, Alan Adam, Thomas Tröster, F. Bohner, and J. Tölle. “Predicting Plasticity and Fracture of Severe Pre-Strained EN AW-5182 by Yld2000 Yield Locus and Hosford-Coulomb Fracture Model in Sheet Forming Applications.” IOP Conference Series: Materials Science and Engineering 651 (2019): 012057. https://doi.org/10.1088/1757-899X/651/1/012057.
LibreCat | DOI
 
[146]
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak, Emine Fulya, and Thomas Tröster. “Fracture Prediction of Additively Manufactured AlSi10Mg Materials.” Procedia Structural Integrity, 2019, 190–97. https://doi.org/10.1016/j.prostr.2019.12.101.
LibreCat | DOI
 
[145]
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak, Emine Fulya, Julius Hanses, Swetlana Schweizer, and Thomas Tröster. “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” 2019.
LibreCat
 
[144]
2019 | Report | LibreCat-ID: 16029
Marten, Thorsten, and Thomas Tröster. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 16030
Triebus, Marcel, S. Bienia, Thorsten Marten, Thomas Tröster, and K. Dröder. “Press Hardening Integrated Structuring for Hybrid Components.” Verlag Wissenschaftliche Scripten, 2019.
LibreCat
 
[142]
2019 | Book Chapter | LibreCat-ID: 13436
Camberg, Alan Adam, Ina Stratmann, and Thomas Tröster. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” In Technologies for Economical and Functional Lightweight Design. Berlin, Heidelberg, 2019. https://doi.org/10.1007/978-3-662-58206-0_12.
LibreCat | DOI
 
[141]
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Self-Sealing Tool Concept for RTM-Processes,” 2019.
LibreCat
 
[140]
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” 2019.
LibreCat
 
[139]
2019 | Conference Paper | LibreCat-ID: 16027
Camberg, Alan Adam, Marius Striewe, Thomas Tröster, F. Bohner, and J. Tölle. “Investigation of Ductility and Fracture Behavior of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” In 5th MATFEM Conference. München: MATFEM, 2019.
LibreCat
 
[138]
2019 | Book | LibreCat-ID: 16795
Striewe, Jan André, Thomas Tröster, Jannik Kowatz, Gerson Meschut, Richard Grothe, and Guido Grundmeier. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat
 
[137]
2019 | Conference Paper | LibreCat-ID: 16028
Grothe, R., Jan André Striewe, Jannik Kowatz, Guido Grundmeier, Thomas Tröster, and Gerson Meschut. “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” 2019.
LibreCat
 
[136]
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg, Alan Adam, Thomas Tröster, Nikolay Sotirov, Jörn Tölle, and Friedrich Bohner. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” In Materials Science and Engineering (MSE) Congress 2018. Darmstadt, 2018.
LibreCat
 
[135]
2018 | Misc | LibreCat-ID: 6594
Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
 
[134]
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski, Nathalie, Junhe Lian, Alan Adam Camberg, Thomas Tröster, Sebastian Münstermann, Wolfgang Bleck, Helmut Gese, and Helmut Richter. “Forming Limit Curves of DP600 Determined in High-Speed Nakajima Tests and Predicted by Two Different Strain-Rate-Sensitive Models,” 2018. https://doi.org/10.1063/1.5035024.
LibreCat | DOI
 
[133]
2018 | Conference Paper | LibreCat-ID: 16034
Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.” In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat
 
[132]
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 16040
Wang, Z., and Thomas Tröster. “Influences of Interface on the Adhesion and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted Resin Transfer Moulding,” 2018.
LibreCat
 
[130]
2018 | Conference Paper | LibreCat-ID: 16042 | OA
Triebus, Marcel, Thomas Tröster, Alan Adam Camberg, S. Bienia, and K. Dröder. “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.” In 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[129]
2018 | Conference Paper | LibreCat-ID: 16043 | OA
Camberg, Alan Adam, Thomas Tröster, A. Schneidt , N. Sotirov , and J. Tölle. “The Influence of Damage Accumulation on Failure Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal Sheet Metal Forming.” In 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[128]
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer, Swetlana, and Thomas Tröster. “Holz als Werkstoff im Automobil,” 2018.
LibreCat
 
[127]
2018 | Conference Paper | LibreCat-ID: 16057
Wang, Z., and Thomas Tröster. “Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess,” 2018.
LibreCat
 
[126]
2018 | Journal Article | LibreCat-ID: 13439
Camberg, Alan Adam, F Bohner, J Tölle, A Schneidt, S Meiners, and Thomas Tröster. “Formability Enhancement of EN AW-5182 H18 Aluminum Alloy Sheet Metal Parts in a Flash Forming Process: Testing, Calibration and Evaluation of Fracture Models.” IOP Conference Series: Materials Science and Engineering, 2018. https://doi.org/10.1088/1757-899x/418/1/012018.
LibreCat | DOI
 
[125]
2018 | Conference Paper | LibreCat-ID: 16052
Horwath, Ilona, Silvia Dohmeier-Fischer, Nathalie Weiß-Borkowski, and Thomas Tröster. “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.” In INTED2018 Proceedings, 2018. https://doi.org/10.21125/inted.2018.1651.
LibreCat | DOI
 
[124]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[123]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko Schaper, M. Peters, M. Burns, F. Hengsbach, and A. Altmann. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” In Contributed Papers from MS&T17, 2018. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[122]
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski, Nathalie, Ilona Horwath, A. Berscheid, Silvia Dohmeier-Fischer, and Thomas Tröster. “NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH.” In INTED2018 Proceedings, 2018. https://doi.org/10.21125/inted.2018.1298.
LibreCat | DOI
 
[121]
2018 | Conference Paper | LibreCat-ID: 16035
Striewe, Jan André, R. Grothe, Jannik Kowatz, Thomas Tröster, Guido Grundmeier, and Gerson Meschut. “Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness,” 2018.
LibreCat
 
[120]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, Thomas Tröster, Thomas Heggemann, H. Homberg, Mirko Schaper, J. Dietrich, Wolfgang Bremser, et al. “LHYBS – Lightweight Design by Novel Hybrid Materials,” 2018.
LibreCat
 
[119]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., Z. Wang, Thomas Tröster, and Mirko Schaper. “Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM,” 2018.
LibreCat
 
[118]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[117]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing 3, no. 4 (2018): 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[116]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, Mathias Bobbert, Christian Dammann, Zheng Wang, Thomas Tröster, Rolf Mahnken, Gerson Meschut, and Mirko Schaper. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, 173–85. https://doi.org/10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[115]
2017 | Conference Paper | LibreCat-ID: 6559
Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic Measurement Applications.” In Proceedings of Meetings on Acoustics, 030004. Honolulu, 2017. https://doi.org/10.1121/2.0000688.
LibreCat | DOI
 
[114]
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas Tröster. “Investigation of Geometrical Discontinuities in Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating,” 2017.
LibreCat
 
[113]
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas Tröster. “Effects of Holes in Blanks for Press Hardening Process Due to Induction Heating,” 2017.
LibreCat
 
[112]
2017 | Journal Article | LibreCat-ID: 15941
Reuter, Corin, Kim-Henning Sauerland, and Thomas Tröster. “Experimental and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.” Composite Structures, 2017, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052.
LibreCat | DOI
 
[111]
2017 | Journal Article | LibreCat-ID: 15942
Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures 117 (2017): 1–9. https://doi.org/10.1016/j.tws.2017.03.034.
LibreCat | DOI
 
[110]
2017 | Journal Article | LibreCat-ID: 15944
Striewe, Jan André, Corin Reuter, Kim-Henning Sauerland, and Thomas Tröster. “Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.” Thin-Walled Structures, 2017, 501–8. https://doi.org/10.1016/j.tws.2017.11.011.
LibreCat | DOI
 
[109]
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski, Nathalie, Juhne Lian, Thorsten Marten, Thomas Tröster, Sebastian Münstermann, and Wolfgang Bleck. “Forming Limit Curves Determined in High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” In Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017. https://doi.org/10.1063/1.5007961.
LibreCat | DOI
 
[108]
2017 | Journal Article | LibreCat-ID: 16062
Schweizer, Swetlana, Anna Becker-Staines, and Thomas Tröster. “Separation of Hybrid Structures for the Reclaim of Their Single Components.” Key Engineering Materials, 2017, 568–75. https://doi.org/10.4028/www.scientific.net/kem.742.568.
LibreCat | DOI
 
[107]
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
LibreCat
 
[106]
2017 | Conference Paper | LibreCat-ID: 16065
Kutz, P., Z. Wang, M. Ellouz, T. Kordisch, and Thomas Tröster. “Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,” 2017.
LibreCat
 
[105]
2017 | Conference Paper | LibreCat-ID: 16071
Wang, Z., P. Kutz, and Thomas Tröster. “Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,” 2017.
LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten. “Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
LibreCat
 
[103]
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken. “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates,” 2017.
LibreCat
 
[102]
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive Fertigung,” 2017.
LibreCat
 
[101]
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in der additiven Fertigung,” 2017.
LibreCat
 
[100]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, Peter Koppa, F. Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[99]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[98]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design 133 (2017): 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[97]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2017. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[96]
2016 | Journal Article | LibreCat-ID: 15962
Tröster, Thomas, Alan Adam Camberg, Bamned Sanitther, Zheng Wang, and Christian Lauter. “Manufacturing and Investigation of Steel-CFRP Hybrid Pillar Structures for Automotive Applications by Intrinsic Resin Transfer Moulding Technology.” International Journal of Automotive Composites 2 (2016): 229–43. https://doi.org/10.1504/ijautoc.2016.10005304.
LibreCat | DOI
 
[95]
2016 | Journal Article | LibreCat-ID: 16139
Schweizer, Swetlana, and Thomas Tröster. “Recyclingkonzepte für hybride Strukturen.” Carbon Composites Magazin, no. 2 (2016): 23.
LibreCat
 
[94]
2016 | Journal Article | LibreCat-ID: 16146
Grienitz, Volker, Thomas Tröster, and Stefan Meiners. “Technikevaluation für die generative Fertigung eines Serien-Radträgers.” ATZ - Automobiltechnische Zeitschrift, 2016, 36–41. https://doi.org/10.1007/s35148-016-0090-5.
LibreCat | DOI
 
[93]
2016 | Conference Paper | LibreCat-ID: 16264
Wang, Z., and Thomas Tröster. “Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren,” 2016.
LibreCat
 
[92]
2016 | Conference Paper | LibreCat-ID: 16266
Striewe, Jan André, C. Reuter, C. Oberkönig, C. Lauter, and Thomas Tröster. “Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe,” 2016.
LibreCat
 
[91]
2016 | Conference Paper | LibreCat-ID: 16267
Striewe, Jan André, C. Lauter, C. Reuter, and Thomas Tröster. “Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites,” 2016.
LibreCat
 
[90]
2016 | Conference Paper | LibreCat-ID: 16268
Striewe, Jan André, C. Reuter, C. Lauter, and Thomas Tröster. “Innovative Largescale Production Process for Multilayered Sheet-Metal-FRP-Structures,” 2016.
LibreCat
 
[89]
2016 | Conference Paper | LibreCat-ID: 16269
Wang, Z., C. Lauter, Julian Löseke, and Thomas Tröster. “CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications,” 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., Dominik Ahlers, and Thomas Tröster. “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten.” Der Stahlformenbauer , no. 5 (2016).
LibreCat
 
[87]
2016 | Journal Article | LibreCat-ID: 16137
Lauter, Christian, Corin Reuter, Shuang Wu, and Thomas Tröster. “Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology.” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 10, no. 5 (2016): 875–80. https://doi.org/doi.org/10.5281/zenodo.1124481.
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites 2 (2016): 272–98. https://doi.org/10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[85]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Mirko Schaper, and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” 2016.
LibreCat
 
[84]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., Mathias Bobbert, C. Dammann, Z. Wang, Mirko Schaper, Gerson Meschut, Rolf Mahnken, and Thomas Tröster. “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” 2016.
LibreCat
 
[83]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert, Mathias, Florian Augethaler, Zheng Wang, Thomas Tröster, and Gerson Meschut. “Novel Process Approach for In-Situ Insertion of Functional Elements in RTM-Applications.” Journal of Materials Science Research, 2016. https://doi.org/10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[82]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[81]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[80]
2015 | Journal Article | LibreCat-ID: 15964
Leuders, Stefan, Malte Vollmer, Florian Brenne, Thomas Tröster, and Thomas Niendorf. “Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting.” Metallurgical and Materials Transactions A, 2015, 3816–23. https://doi.org/10.1007/s11661-015-2864-x.
LibreCat | DOI
 
[79]
2015 | Conference Paper | LibreCat-ID: 16131
Marten, Thorsten, Holger Block, and Thomas Tröster. “Partial Hardening of New Press Hardenable Steels,” 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski, Nathalie, Thorsten Marten, Holger Block, and Thomas Tröster. “Multi-Axial Material Testing at High Strain Rates in High Speed Cupping Tests,” 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16135
Frantz, M., C. Lauter, Z. Wang, and Thomas Tröster. “Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK),” 139–44. Verlag Stahleisen GmbH, 2015.
LibreCat
 
[76]
2015 | Conference Paper | LibreCat-ID: 16136
Reuter, C., Thomas Tröster, and C. Lauter. “Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna,” 127–32. Verlag Stahleisen GmbH, 2015.
LibreCat
 
[75]
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik, W., S. Leuders, A. Riemer, Thomas Tröster, H. A. Richard, and T. Niendorf. “Fatigue Life Prediction for Metals Processed by Selective Laser Melting Using Finite Element Analyses,” 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16259
Wang, Z., C. Lauter, B. Sanitther, M. Frantz, and Thomas Tröster. “Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding,” 2015.
LibreCat
 
[73]
2015 | Conference Paper | LibreCat-ID: 16260
Lauter, C., Z. Wang, Thomas Tröster, R. Brandis, and D. Köchling. “Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design,” 2015.
LibreCat
 
[72]
2015 | Conference Paper | LibreCat-ID: 16261
Leuders, S., S. Meiners, A. Taube, Thomas Tröster, and T. Niendorf. “Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting,” 2015.
LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach, Nils, and Thomas Tröster. “Material Follows Form Follows Function,” 2015.
LibreCat
 
[70]
2015 | Conference Paper | LibreCat-ID: 16133
Lauter, C., Z. Wang, Isabel Koke, and Thomas Tröster. “Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology,” 2015.
LibreCat
 
[69]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Gerson Meschut, Mirko Schaper, and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” 2015.
LibreCat
 
[68]
2015 | Conference Paper | LibreCat-ID: 23061
Lauter, Christian, Zheng Wang, Isabel Koke, and Thomas Tröster. “Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology.” In 20th International Conference on Composite Materials, Copenhagen, 2015.
LibreCat
 
[67]
2014 | Journal Article | LibreCat-ID: 15966
Niendorf, Thomas, Stefan Leuders, Andre Riemer, Florian Brenne, Thomas Tröster, Hans Albert Richard, and Dieter Schwarze. “Functionally Graded Alloys Obtained by Additive Manufacturing.” Advanced Engineering Materials, 2014, 857–61. https://doi.org/10.1002/adem.201300579.
LibreCat | DOI
 
[66]
2014 | Journal Article | LibreCat-ID: 15967
Riemer, A., S. Leuders, M. Thöne, H.A. Richard, Thomas Tröster, and T. Niendorf. “On the Fatigue Crack Growth Behavior in 316L Stainless Steel Manufactured by Selective Laser Melting.” Engineering Fracture Mechanics, 2014, 15–25. https://doi.org/10.1016/j.engfracmech.2014.03.008.
LibreCat | DOI
 
[65]
2014 | Conference Paper | LibreCat-ID: 16097
Klein, M., D. Hülsbusch, F. Walther, M. Bartsch, J. Hausmann, M. Frantz, C. Lauter, and Thomas Tröster. “Characterization of the Corrosion Influence on the Fatigue Behavior of Intrinsic CFRP-Steel-Hybrids,” 188–93, 2014.
LibreCat
 
[64]
2014 | Conference Paper | LibreCat-ID: 16099
Frantz, M, Christian Lauter, Thomas Tröster, J. Hausmann, M. Bartsch, D Hülsbusch, and F. Walther. “Efficient Manufacturing of Hybrid Structures Consisting of Steel and CFRP with Using Residual Heat / Effiziente Herstellung von Hybridbauteilen Aus Stahl Und CFK Mithilfe von Restwärmeausnutzung,” 2014.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16120
Block, Holger, Thorsten Marten, and Thomas Tröster. “Crash Simulation of High Strength Automotive Components Using Advanced Failure Models,” 2014.
LibreCat
 
[62]
2014 | Journal Article | LibreCat-ID: 16122
Lauter, Christian, Joerg Niewel, and Thomas Tröster. “Quasistatic and Crash Tests of Steel-CFRP Hybrid Pillar Structures for Automotive Applications.” International Journal of Automotive Composites, 2014. https://doi.org/10.1504/ijautoc.2014.064127.
LibreCat | DOI
 
[61]
2014 | Conference Paper | LibreCat-ID: 16128
Block, Holger, Thorsten Marten, Nathalie Weiß Borkowski, and Thomas Tröster. “Crash Performance of the New Press Hardenable Steel 15MnB6,” 2014.
LibreCat
 
[60]
2014 | Conference Paper | LibreCat-ID: 16129
Reuter, Corin, Dominik Flore, Simon Pöhler, Kim Henning Sauerland, and Thomas Tröster. “Numerical Simulation of the Energy Absorption of Fiber-Reinforced Plastics,” 2014.
LibreCat
 
[59]
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski, Nathalie, Thorsten Marten, and Thomas Tröster. “Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch,” 2014.
LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16255
Leuders, S., A. Riemer, H. A. Richard, Thomas Tröster, and T. Niendorf. “Selective-Laser-Melting Materials under Cyclic Loading: Influence of Process-Inherent Defects on the Initiation and Propagation of Fatigue Cracks,” 2014.
LibreCat
 
[57]
2014 | Conference Paper | LibreCat-ID: 16256
Leuders, S., Thomas Tröster, F. Brenne, A. Riemer, H. A. Richard, and T. Niendorf. “Evaluation of the Effect of Defects on the Mechanical Performance of Components Manufactured by Selective Laser Melting,” 2014.
LibreCat
 
[56]
2014 | Conference Paper | LibreCat-ID: 16257
Leuders, S., Thomas Tröster, A. Riemer, H. A. Richard, and T. Niendorf. “On the Mechanical Performance of Structures Manufactured by Selective Laser Melting: Damage Initiation and Propagation,” 2014.
LibreCat
 
[55]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, Tobias Lieneke, Stefan Lammers, Thomas Tröster, and Thomas Niendorf. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, 1911–19. https://doi.org/10.1557/jmr.2014.157.
LibreCat | DOI
 
[54]
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer, Elmar, C. Budde, Thomas Tröster, and Simon Pöhler. “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” 101–8, 2014.
LibreCat
 
[53]
2014 | Journal Article | LibreCat-ID: 16125
Moritzer, Elmar, C. Budde, Thomas Tröster, and Simon Pöhler. “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination.” Joining Plastics 8, no. 2 (2014): 100–105.
LibreCat
 
[52]
2013 | Journal Article | LibreCat-ID: 15968
Niendorf, Thomas, Stefan Leuders, Andre Riemer, Hans Albert Richard, Thomas Tröster, and Dieter Schwarze. “Highly Anisotropic Steel Processed by Selective Laser Melting.” Metallurgical and Materials Transactions B, 2013, 794–96. https://doi.org/10.1007/s11663-013-9875-z.
LibreCat | DOI
 
[51]
2013 | Journal Article | LibreCat-ID: 16016
Riemer, Andre, S. Leuders, Hans A. Richard, and Thomas Tröster. “Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗.” Materials Testing, 2013, 537–43. https://doi.org/10.3139/120.110468.
LibreCat | DOI
 
[50]
2013 | Conference Paper | LibreCat-ID: 16017
Marten, Thorsten, Holger Block, Thomas Tröster, Thomas Gerber, Sascha Sikora, and Franz-Josef Lenze. “Graded Lightweight Structures Through Hot Forming,” 2013.
LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16018
Lauter, Christian, T. Hochschulz, Meike Frantz, and Thomas Tröster. “Influences of Automotive Process Characteristics on Hybrid Structures,” 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16019
Siewers, Bernd, Christian Lauter, and Thomas Tröster. “Curing of Fibre Reinforced Plastics by Resistance Heating of Sheet Metal in a Hybrid Structure,” 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16020
Tröster, Thomas, Christian Lauter, and C. Reuter. “Crashworthiness of Hybrid Structures,” 2013.
LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16021
Siewers, Bernd, Christian Lauter, and Thomas Tröster. “Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures,” 2013.
LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16022
Lauter, Christian, T. Krooß, and Thomas Tröster. “Manufacturing of Hybrid Structures by Prepreg Press Technology,” 2013.
LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16023
Tröster, Thomas, Christian Lauter, and C. Reuter. “Leichtbau mit Hybridstrukturen im Automobil,” 2013.
LibreCat
 
[43]
2013 | Conference Paper | LibreCat-ID: 16024
Leuders, S., A. Riemer, T. Niendorf, H. A. Richard, and Thomas Tröster. “On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects,” 2013.
LibreCat
 
[42]
2013 | Conference Paper | LibreCat-ID: 16025
Marten, Thorsten, Holger Block, and Thomas Tröster. “Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess,” 2013.
LibreCat
 
[41]
2013 | Conference Paper | LibreCat-ID: 16026
Riemer, A., S. Leuders, H. A. Richard, and Thomas Tröster. “Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen,” 2013.
LibreCat
 
[40]
2013 | Book Chapter | LibreCat-ID: 16096
Lauter, Christian, Thomas Tröster, and Corin Reuter. “Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications.” In Advanced Composite Materials for Automotive Applications. Chichester, UK, 2013. https://doi.org/10.1002/9781118535288.ch7.
LibreCat | DOI
 
[39]
2012 | Journal Article | LibreCat-ID: 15981
Tröster, Thomas, Thorsten Marten, Dieter Thomas, Holger Block, Christian Lauter, and Markus Thöne. “Automobilleichtbau mit innovativen Werkstoffen und Prozessen.” Forschungsforum Paderborn 15, no. 15/2012 (2012): 30–38.
LibreCat
 
[38]
2012 | Journal Article | LibreCat-ID: 15983
Lauter, Christian, Simon Werneke, Bernd Siewers, and Thomas Tröster. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.” Lightweight Design, 2012, 53–58. https://doi.org/10.1365/s35725-012-0079-2.
LibreCat | DOI
 
[37]
2012 | Conference Paper | LibreCat-ID: 15985
Reuter, Corin, Meike Frantz, Christian Lauter, Holger Block, and Thomas Tröster. “Simulation and Testing of Hybrid Structures Consisting of Press-Hardened Steel and CFRP,” 2012.
LibreCat
 
[36]
2012 | Conference Paper | LibreCat-ID: 15987
Lauter, Christian, Meike Frantz, J. P. Kohler, and Thomas Tröster. “Crash Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” 2012.
LibreCat
 
[35]
2012 | Conference Paper | LibreCat-ID: 15988
Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Joining Technologies for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics,” 2012.
LibreCat
 
[34]
2012 | Journal Article | LibreCat-ID: 15989
Ickert, Leif, Dieter Thomas, Thomas Tröster, and Lutz Eckstein. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.” FAT-Schriftenreihe 244, no. 244 (2012).
LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16004
Lauter, Christian, Bernd Siewers, B. Zanft, and Thomas Tröster. “Crash Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” 2012.
LibreCat
 
[32]
2012 | Conference Paper | LibreCat-ID: 16007
Thöne, M., S. Leuders, A. Riemer, Thomas Tröster, and H. A. Richard. “Influence of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V,” 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16008
Riemer, A., S. Leuders, Thomas Tröster, and H. A. Richard. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, 2012.
LibreCat
 
[30]
2012 | Conference Paper | LibreCat-ID: 16009
Leuders, S., A. Riemer, Thomas Tröster, and H. A. Richard. “Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement,” 2012.
LibreCat
 
[29]
2012 | Report | LibreCat-ID: 16012
Tröster, Thomas, Thorsten Marten, Stefan Adelbert, and Abdel Kadim. P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat
 
[28]
2012 | Journal Article | LibreCat-ID: 16015
Leuders, S., M. Thöne, A. Riemer, T. Niendorf, Thomas Tröster, H.A. Richard, and H.J. Maier. “On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance.” International Journal of Fatigue, 2012, 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.011.
LibreCat | DOI
 
[27]
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, Hans Christian, Ulf Damerow, Christian Lauter, Bernhard Gorny, Frederik Hankeln, Werner Homberg, Thomas Tröster, Hans Jürgen Maier, and Rolf Mahnken. “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.” Key Engineering Materials, 2012, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295.
LibreCat | DOI
 
[26]
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., Frederik Hankeln, Christian Lauter, H. C. Schmidt, U. Damerow, Rolf Mahnken, H. J. Maier, Thomas Tröster, and Werner Homberg. “Simulation and Manufacturing of Deep Drawn Parts Reinforced by Carbon Fibre Prepregs,” 2012.
LibreCat
 
[25]
2012 | Journal Article | LibreCat-ID: 16010
Lauter, Christian, Thomas Tröster, Rinje Brandis, and Jürgen Gausemeier. “Methodik für die Produktentstehung hybrider Leichtbaustrukturen.” Lightweight Design 5 (2012): 50–56. https://doi.org/10.1365/s35725-013-0137-4.
LibreCat | DOI
 
[24]
2011 | Journal Article | LibreCat-ID: 15969
Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Multimaterialsysteme höchstfest verbunden.” Adhäsion – Kleben und Dichten 3/2011 (2011): 39–43.
LibreCat
 
[23]
2011 | Conference Paper | LibreCat-ID: 15971
Frantz, Meike, O. Stübbe, Christian Lauter, J. Schrange, and Thomas Tröster. “Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder,” 2011.
LibreCat
 
[22]
2011 | Conference Paper | LibreCat-ID: 15972
Thomas, D., H. Block, Thomas Tröster, and J. Krogmeier. “Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,” 2011.
LibreCat
 
[21]
2011 | Journal Article | LibreCat-ID: 15974
Marten, Thorsten, Christian Lauter, and Thomas Tröster. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.” Ingenieurspiegel 2/2011 (2011): 67–69.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 15975
Lauter, Christian, D. Thomas, Meike Frantz, J. Niewel, and Thomas Tröster. “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen.” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte 2 (2011): 6–7.
LibreCat
 
[19]
2011 | Journal Article | LibreCat-ID: 15980
Lauter, Christian, Meike Frantz, Bernd Siewers, and Thomas Tröster. “Hybrid Structures for Tailored Structural Automotive Components.” JEC Composites Magazine 69 (2011): 35–37.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15990
Thomas, D., H. Block, and Thomas Tröster. “Production of Load-Adapted Lightweight Designs by Partial Hardening,” 2011.
LibreCat
 
[17]
2011 | Journal Article | LibreCat-ID: 15992
Gorny, B., T. Niendorf, J. Lackmann, M. Thoene, Thomas Tröster, and H.J. Maier. “In Situ Characterization of the Deformation and Failure Behavior of Non-Stochastic Porous Structures Processed by Selective Laser Melting.” Materials Science and Engineering: A 528, no. 27 (2011): 7962–67. https://doi.org/10.1016/j.msea.2011.07.026.
LibreCat | DOI
 
[16]
2011 | Journal Article | LibreCat-ID: 15993
Lauter, Christian, Meike Frantz, and Thomas Tröster. “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen.” Lightweight Design 4 (2011): 48–54.
LibreCat
 
[15]
2011 | Conference Paper | LibreCat-ID: 15996
Frantz, Meike, Christian Lauter, and Thomas Tröster. “Advanced Manufacturing Technologies for Automotive Structures in Multi-Material Design Consisting of High-Strength Steels and CFRP,” 2011.
LibreCat
 
[14]
2011 | Journal Article | LibreCat-ID: 15997
Lauter, Christian, Meike Frantz, Thorsten Marten, Thomas Tröster, G. Bach, and G. Seliger. “Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen.” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 09/2011 (2011).
LibreCat
 
[13]
2011 | Journal Article | LibreCat-ID: 15998
Frantz, Meike, Christian Lauter, and Thomas Tröster. “Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen.” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 10/2011 (2011).
LibreCat
 
[12]
2011 | Conference Paper | LibreCat-ID: 15999
Marten, Thorsten, Thomas Tröster, S. Adelbert, and A. Kadim. “Fluidized Bed Heating of Blanks for the Hot Forming Process,” 2011.
LibreCat
 
[11]
2011 | Conference Paper | LibreCat-ID: 16002
Tröster, Thomas, and Christian Lauter. “Hybridstrukturen für den automobilen Leichtbau,” 2011.
LibreCat
 
[10]
2011 | Journal Article | LibreCat-ID: 16013
Lauter, Christian, Meike Frantz, and Thomas Tröster. “Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen.” Lightweight Design 4 (2011): 48–54. https://doi.org/10.1365/s35725-011-0044-5.
LibreCat | DOI
 
[9]
2011 | Journal Article | LibreCat-ID: 16000
Marten, Thorsten, J. Niewel, and Thomas Tröster. “Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess.” HTM Journal of Heat Treatment and Materials, 2011, 309–15. https://doi.org/10.3139/105.110119.
LibreCat | DOI
 
[8]
2011 | Conference Paper | LibreCat-ID: 15970
Lauter, Christian, Ulf Damerow, Meike Frantz, Thomas Tröster, and Werner Homberg. “Produktionsverfahren Zur Herstellung Höchstfester Hybrider Leichtbaustrukturen Für Den Einsatz Im Automobil,” 2011.
LibreCat
 
[7]
2011 | Conference Paper | LibreCat-ID: 15991
Lauter, Christian, J. Dau, Thomas Tröster, and Werner Homberg. “Manufacturing Processes for Automotive Structures in Multi-Material Design Consisting of Sheet Metal and CFRP Prepregs,” 2011.
LibreCat
 
[6]
2011 | Conference Paper | LibreCat-ID: 15994
Dau, J., Christian Lauter, U. Damerow, Werner Homberg, and Thomas Tröster. “Multi-Material Systems for Tailored Automotive Structural Components,” 2011.
LibreCat
 
[5]
2009 | Journal Article | LibreCat-ID: 15953
Böke, Johannes, Rüdiger Erhardt, Wilfried Rostek, and Thomas Tröster. “Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau*.” Materials Testing, 2009, 22–27. https://doi.org/10.3139/120.110002.
LibreCat | DOI
 
[4]
2008 | Conference Paper | LibreCat-ID: 15954
Tröster, Thomas, C. Howe, M. Müller, and W. Rostek. “Development Status and Market Potential of Hot Formed Ballistic Steels,” 2008.
LibreCat
 
[3]
2008 | Conference Paper | LibreCat-ID: 33878
Tröster, Thomas, W. Rostek, J. Böke, and R. Erhardt. “Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau.” In Ein wesentlicher Beitrag zur Klimadebatte, edited by DVM, Vol. 675. DVM-Bericht, 2008.
LibreCat
 
[2]
2007 | Book | LibreCat-ID: 33880
Tröster, Thomas, and J. Berg. Ermittlung dynamischer Grenzformänderungsdiagramme für Karosseriestähle. Vol. P727. Bericht der Forschungsvereinigung Stahlanwendung. Düsseldorf: Verlag- und Vertriebsgesellschaft Düsseldorf, 2007.
LibreCat
 
[1]
2004 | Conference Paper | LibreCat-ID: 33881
Tröster, Thomas, and W. Rostek. “Innovative Warmumformung.” In Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung” in Fellbach, edited by Thomas Tröster and W. Rostek, 51–66. Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung.” Fellbach, 2004.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: Chicago

Export / Embed

229 Publications

Mark all

[229]
2025 | Journal Article | LibreCat-ID: 58379 | OA
Chalicheemalapalli Jayasankar, Deviprasad, Thomas Tröster, and Thorsten Marten. “Optimizing Injection Molding Tool Design with Additive Manufacturing: A Focus on Thermal Performance and Process Efficiency.” Materials 18, no. 3 (2025). https://doi.org/10.3390/ma18030571.
LibreCat | DOI | Download (ext.)
 
[228]
2025 | Journal Article | LibreCat-ID: 58163 | OA
Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich, Miriam Löbbecke, and Thomas Tröster. “Correlation between Interlaminar Shear Strength of CFRP and Joint Strength of Aluminium-CFRP Hybrid Joints.” The Journal of Adhesion, 2025, 1–26. https://doi.org/10.1080/00218464.2024.2439956.
LibreCat | DOI | Download (ext.)
 
[227]
2025 | Journal Article | LibreCat-ID: 58451 | OA
Chalicheemalapalli Jayasankar, Deviprasad, Thomas Tröster, Manel Ellouz, and Thomas Kordisch. “Intrinsic Production of Metal-Carbon Fiber Reinforced Plastic Hybrid Shafts Using Vacuum-Assisted Resin Transfer Molding.” Journal of Composite Materials, 2025. https://doi.org/10.1177/00219983251313981.
LibreCat | DOI | Download (ext.)
 
[226]
2025 | Conference Paper | LibreCat-ID: 59441
Devulapally, Deekshith Reddy, and Thomas Tröster. “Modelling Strategies for Non-Rotationally Symmetric Joints.” In Materials Research Proceedings, Vol. 52. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-21.
LibreCat | DOI
 
[225]
2024 | Journal Article | LibreCat-ID: 55762
Delp, Alexander, Shuang Wu, Jonathan Freund, Ronja Scholz, Miriam Löbbecke, Thomas Tröster, Jan Haubrich, and Frank Walther. “Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP.” Materials 17, no. 8 (2024). https://doi.org/10.3390/ma17081907.
LibreCat | DOI
 
[224]
2024 | Journal Article | LibreCat-ID: 55743
Irmak, Hayrettin, Steffen Rainer Tinkloh, Thorsten Marten, and Thomas Tröster. “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure.” Journal of Composites Science 8, no. 8 (2024). https://doi.org/10.3390/jcs8080316.
LibreCat | DOI
 
[223]
2024 | Conference Abstract | LibreCat-ID: 57202
Ostermann, Moritz, Thorsten Marten, and Thomas Tröster. “Prospective Life Cycle Assessment of Lightweight Structures in Vehicles for On-Demand Mobility Systems.” In 16th Biennial International Conference on EcoBalance. Sendai, Japan, 2024.
LibreCat
 
[222]
2024 | Conference Abstract | LibreCat-ID: 57537
Ostermann, Moritz, Thorsten Marten, and Thomas Tröster. “Scenario-Based Life Cycle Assessment of Vehicle Lightweight Structures.” In Sustainability in Product and Production Engineering. Bad Nauheim: Automotive Circle, 2024.
LibreCat
 
[221]
2024 | Journal Article | LibreCat-ID: 57468
Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Dennis Lehnert, Artur Walter, Robin Rohling, and Thomas Tröster. “Effect of Substrate Temperature on Bead Track Geometry of 316L in Directed Energy Deposition: Investigation and Regression Modeling.” Metals 14, no. 12 (2024). https://doi.org/10.3390/met14121353.
LibreCat | Files available | DOI
 
[220]
2024 | Journal Article | LibreCat-ID: 57467
Lehnert, Dennis, Christian Bödger, Philipp Pabel, Claus Scheidemann, Tobias Hemsel, Stefan Gnaase, David Kostka, and Thomas Tröster. “The Influence of Ultrasonic Irradiation of a 316L Weld Pool Produced by DED on the Mechanical Properties of the Produced Component.” Crystals 14, no. 11 (2024). https://doi.org/10.3390/cryst14111001.
LibreCat | Files available | DOI
 
[219]
2024 | Journal Article | LibreCat-ID: 56089 | OA
Chalicheemalapalli Jayasankar, Deviprasad, Stefan Gnaase, Maximilian Alexander Kaiser, Dennis Lehnert, and Thomas Tröster. “Advancements in Hybrid Additive Manufacturing: Integrating SLM and LMD for High-Performance Applications.” Metals 14, no. 7 (2024). https://doi.org/10.3390/met14070772.
LibreCat | DOI | Download (ext.)
 
[218]
2024 | Journal Article | LibreCat-ID: 58381
Suresh, Keenatampalle, C.R. Kesavulu, Deviprasad Chalicheemalapalli Jayasankar, Wisanu Pecharapa, Upendra Kumar Kagola, Thomas Tröster, and C.K. Jayasankar. “Stokes and Anti-Stokes Emission Characteristics of Er3+/Yb3+ Co-Doped Zinc Tellurite Glasses under 377 and 1550 Nm Excitations for Solar Energy Conversion Application.” Journal of Luminescence 277 (2024). https://doi.org/10.1016/j.jlumin.2024.120948.
LibreCat | DOI
 
[217]
2024 | Conference Paper | LibreCat-ID: 55638 | OA
Devulapally, Deekshith Reddy, Sven Martin, and Thomas Tröster. “Non-Rotationally Symmetric Joints – Mechanisms and Load Bearing Capacity.” In Materials Research Proceedings. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-183.
LibreCat | DOI | Download (ext.)
 
[216]
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, Dennis Milaege, Swetlana Schweizer, Werner Homberg, Mirko Schaper, and Thomas Tröster. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming 16, no. 6 (2023). https://doi.org/10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[215]
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak, Emine Fulya, Hendrik Hanses, Ilona Horwath, and Thomas Tröster. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.” In Climate Protection, Resource Efficiency, and Sustainable Engineering. Bielefeld, Germany: transcript Verlag, 2023. https://doi.org/10.14361/9783839463772-006.
LibreCat | DOI
 
[214]
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter, Julian, Simon Aydin, Thorsten Marten, and Thomas Tröster. “Analysis and Optimization of Joint Formation in Hybrid Compression Molding,” 2023.
LibreCat
 
[213]
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar, Deviprasad, Tim Stallmeister, Julian Lückenkötter, and Thomas Tröster. “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” 2023.
LibreCat | Files available
 
[212]
2023 | Book Chapter | LibreCat-ID: 44502
Ostermann, Moritz, Jonathan Behm, Thorsten Marten, Thomas Tröster, Johannes Weyer, Kay Cepera, and Fabian Adelt. “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility.” In Towards the New Normal in Mobility, edited by Heike Proff. Wiesbaden: Springer Fachmedien Wiesbaden, 2023. https://doi.org/10.1007/978-3-658-39438-7_25.
LibreCat | DOI
 
[211]
2023 | Journal Article | LibreCat-ID: 43464 | OA
Ostermann, Moritz, Julian Grenz, Marcel Triebus, Felipe Cerdas, Thorsten Marten, Thomas Tröster, and Christoph Herrmann. “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures.” Energies 16, no. 8 (2023). https://doi.org/10.3390/en16083371.
LibreCat | DOI | Download (ext.)
 
[210]
2023 | Conference Paper | LibreCat-ID: 44154
Lückenkötter, Julian, J.P. Leimbach, Tim Stallmeister, Thorsten Marten, and Thomas Tröster. “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector.” In Materials Research Proceedings, 28:249–58. Materials Research Forum LLC, 2023. https://doi.org/10.21741/9781644902479-27.
LibreCat | DOI
 
[209]
2023 | Journal Article | LibreCat-ID: 45782 | OA
Grenz, Julian, Moritz Ostermann, Karoline Käsewieter, Felipe Cerdas, Thorsten Marten, Christoph Herrmann, and Thomas Tröster. “Integrating Prospective LCA in the Development of Automotive Components.” Sustainability 15, no. 13 (2023). https://doi.org/10.3390/su151310041.
LibreCat | Files available | DOI | Download (ext.)
 
[208]
2023 | Journal Article | LibreCat-ID: 46486
Pfeifer, Florian, Lukas Knorr, Florian Schlosser, Thorsten Marten, and Thomas Tröster. “Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes.” Journal of Sustainable Development of Energy, Water and Environment Systems 11, no. 3 (2023): 1–20. https://doi.org/10.13044/j.sdewes.d11.0450.
LibreCat | DOI
 
[207]
2023 | Conference Abstract | LibreCat-ID: 42459
Ostermann, Moritz, Jonathan Behm, Thorsten Marten, and Thomas Tröster. “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen.” In WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte. Stuttgart, Germany, 2023.
LibreCat
 
[206]
2023 | Journal Article | LibreCat-ID: 46494
Freund, Jonathan, Miriam Löbbecke, Alexander Delp, Frank Walther, Shuang Wu, Thomas Tröster, and Jan Haubrich. “Relationship between Laser-Generated Micro- and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.” The Journal of Adhesion, 2023, 1–31. https://doi.org/10.1080/00218464.2023.2223475.
LibreCat | DOI
 
[205]
2023 | Journal Article | LibreCat-ID: 55760
Freund, Jonathan, Isabel Lützenkirchen, Miriam Löbbecke, Alexander Delp, Frank Walther, Shuang Wu, Thomas Tröster, and Jan Haubrich. “Transferability of the Structure–Property Relationships from Laser-Pretreated Metal–Polymer Joints to Aluminum–CFRP Hybrid Joints.” Journal of Composites Science 7, no. 10 (2023). https://doi.org/10.3390/jcs7100427.
LibreCat | DOI
 
[204]
2023 | Journal Article | LibreCat-ID: 46495
Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich, Miriam Löbbecke, and Thomas Tröster. “Adhesion Properties of the Hybrid System Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” The Journal of Adhesion, 2023, 1–29. https://doi.org/10.1080/00218464.2023.2245758.
LibreCat | DOI
 
[203]
2023 | Conference Paper | LibreCat-ID: 48597
Wu, Shuang, Jonathan Freund, Alexander Delp, Jan Haubrich, Miriam Löbbecke, Frank Walther, and Thomas Tröster. “Intrinsic Forming of Hybrid Parts Made of Laser-Structured Aluminium Sheet and CFRP-Prepreg,” 2023.
LibreCat
 
[202]
2023 | Conference Abstract | LibreCat-ID: 49436
Kaiser, Maximilian Alexander, Alexander Reitz, Stefan Konrad, Thomas Meyer, Thorsten Marten, and Thomas Tröster. “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.” In Workshop Warmblechumformung, edited by Marion Merklein, 18:99–118. Warmumformung von höchstfesten Vergütungsstählen: Tagungsband zum 18. Erlanger Workshop Warmblechumformung. erlangen: Lehrstuhl für Fertigungstechnologie, 2023.
LibreCat
 
[201]
2023 | Conference Paper | LibreCat-ID: 50742 | OA
Bödger, Christian, Stefan Gnaase, Dennis Lehnert, and Thomas Tröster. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” In Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.
LibreCat | Files available | Download (ext.)
 
[200]
2023 | Journal Article | LibreCat-ID: 37200
Gnaase, Stefan, Dennis Niggemeyer, Dennis Lehnert, Christian Bödger, and Thomas Tröster. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.” Crystals 13, no. 2 (2023). https://doi.org/10.3390/cryst13020157.
LibreCat | Files available | DOI
 
[199]
2022 | Newspaper Article | LibreCat-ID: 33001
Linnig, Caterina, and Thomas Tröster. “Sauber Recyceln- Innovative Verfahrenskombination Mit Ultraschall Ermöglicht Sicheren Umgang Mit Recycelten Carbonfasern.” CU Reports, 2022.
LibreCat
 
[198]
2022 | Conference Abstract | LibreCat-ID: 37258
Haller, Sebastian, Steffen Rainer Tinkloh, Thomas Tröster, and Robert Brandt. “The Environmental Impact on the Strain Rate Dependent Energy Absorption Capability of a Hybrid Crash Absorber Element.” In 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
 
[197]
2022 | Conference Paper | LibreCat-ID: 32819
Pfeifer, Florian, Thomas Tröster, Thorsten Marten, André Dietrich, Bernard Nacke, and Guido Grundmeier. “Investigation on Hot Sheet Metal Forming by Means of a Longitudinal Flux Inductor.” In Proceedings of the 6th International Conference on Steels in Cars and Trucks, 2022.
LibreCat
 
[196]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, Dietrich, Jan Andre Striewe, Olexandr Grydin, Dennis Meinderink, Guido Grundmeier, Mirko Schaper, and Thomas Tröster. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, 2022, 1–16. https://doi.org/10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[195]
2022 | Journal Article | LibreCat-ID: 31496
Wu, Tao, Roland Kruse, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, Christian Lauhoff, and Thomas Niendorf. “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects.” Journal of Composites Science 6, no. 5 (2022). https://doi.org/10.3390/jcs6050138.
LibreCat | DOI
 
[194]
2022 | Journal Article | LibreCat-ID: 34069
Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak, Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100133.
LibreCat | DOI
 
[193]
2022 | Journal Article | LibreCat-ID: 32814
Wu, T., S. Degener, Steffen Rainer Tinkloh, A. Liehr, W. Zinn, J.P. Nobre, Thomas Tröster, and T. Niendorf. “Characterization of Residual Stresses in Fiber Metal Laminate Interfaces - A Combined Approach Applying Hole-Drilling Method and Energy-Dispersive X-Ray Diffraction.” Composite Structures, 2022. https://doi.org/10.1016/j.compstruct.2022.116071.
LibreCat | DOI
 
[192]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin, Sven, Christian Roman Bielak, Mathias Bobbert, Thomas Tröster, and Gerson Meschut. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, 2022. https://doi.org/10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[191]
2022 | Journal Article | LibreCat-ID: 32813 | OA
Martin, Sven, Kristijan Kurtusic, and Thomas Tröster. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.” Key Engineering Materials 927 (2022). https://doi.org/  https://doi.org/10.4028/p-09md1c.
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Journal Article | LibreCat-ID: 32869
Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.” Key Engineering Materials 926 (2022): 1457–67. https://doi.org/10.4028/p-5fxp53.
LibreCat | DOI
 
[189]
2022 | Conference Abstract | LibreCat-ID: 32871
Triebus, Marcel, Moritz Ostermann, Thomas Tröster, and Ilona Horwath. “Advanced Automotive Components by Fiber-Metal-Laminates.” In Materials in Car Body Engineering - Bad Nauheim, 2022.
LibreCat
 
[188]
2022 | Conference Abstract | LibreCat-ID: 32875
Ostermann, Moritz, Jonathan Behm, Thorsten Marten, Thomas Tröster, Johannes Weyer, Kay Cepera, and Fiabian Adelt. “Individualisierung Des ÖPNV - Integration Technischer Und Sozialer Dimensionen Nachhaltiger Mobilität.” In 14. Wissenschaftsforum Mobilität. Duisburg, Germany, 2022.
LibreCat
 
[187]
2022 | Journal Article | LibreCat-ID: 30510
Delp, Alexander, Jonathan Freund, Shuang Wu, Ronja Scholz, Miriam Löbbecke, Jan Haubrich, Thomas Tröster, and Frank Walther. “Influence of Laser-Generated Surface Micro-Structuring on the Intrinsically Bonded Hybrid System CFRP-EN AW 6082-T6 on Its Corrosion Properties.” Composite Structures 285 (2022). https://doi.org/10.1016/j.compstruct.2022.115238.
LibreCat | DOI
 
[186]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus, Marcel, Alexander Reitz, Olexandr Grydin, Julian Grenz, Andreas Schneidt, Rüdiger Erhardt, Thomas Tröster, and Mirko Schaper. “Forming Simulation of Tailored Press Hardened Parts.” In 13th European LS-DYNA Conference 2021, 2021.
LibreCat | Download (ext.)
 
[185]
2021 | Book | LibreCat-ID: 28461
Tröster, Thomas, Florian Pfeifer, Bernard Nacke, and André Dietrich. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Vol. P1038. FOSTA-Berichte. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
 
[184]
2021 | Book (Editor) | LibreCat-ID: 26996
Koch, Rainer, Iris Gräßler, Detmar Zimmer, and Thomas Tröster, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Vol. 25. Forschungsberichte des Direct Manufacturing Research Centers (DMRC). Düren: Shaker Verlag, 2021.
LibreCat
 
[183]
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis,” 2021.
LibreCat
 
[182]
2021 | Conference Paper | LibreCat-ID: 20857
Camberg, Alan Adam, Thomas Tröster, and Clemens Latuske. “Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing.” Springer, 2021. https://doi.org/10.1007/978-3-662-62924-6_28.
LibreCat | DOI
 
[181]
2021 | Conference Paper | LibreCat-ID: 20858
Camberg, Alan Adam, Thomas Tröster, Nils Wingenbach, Christian Hielscher, and Julian Grenz. “A New Numerical Method for Potential Anaylsis and Design of Hybrid Components from Full Vehicle Simulations: Implementation and Component Design.” Springer, 2021. https://doi.org/10.1007/978-3-662-62924-6_30.
LibreCat | DOI
 
[180]
2021 | Journal Article | LibreCat-ID: 22518 | OA
Triebus, Marcel, Jan Gierse, Thorsten Marten, and Thomas Tröster. “A New Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.” IOP Conference Series: Materials Science and Engineering, 2021. https://doi.org/10.1088/1757-899x/1157/1/012052.
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 22859
Grothe, Richard, Jan Andre Striewe, Dennis Meinderink, Thomas Tröster, and Guido Grundmeier. “Enhanced Corrosion Resistance of Adhesive/Galvanised Steel Interfaces by Nanocrystalline ZnO Thin Film Deposition and Molecular Adhesion Promoting Films.” The Journal of Adhesion, 2021. https://doi.org/10.1080/00218464.2021.1957676.
LibreCat | DOI
 
[178]
2021 | Report | LibreCat-ID: 29807
Linnig, Caterina, and Thomas Tröster. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Osnabrück: Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat
 
[177]
2021 | Journal Article | LibreCat-ID: 24131
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas Niendorf. “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components.” Metals, 2021. https://doi.org/10.3390/met11020335.
LibreCat | DOI
 
[176]
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis.” Metals, 2021. https://doi.org/10.3390/met11010156.
LibreCat | DOI
 
[175]
2021 | Journal Article | LibreCat-ID: 24130
Magnier, A., T. Wu, Steffen Rainer Tinkloh, Thomas Tröster, B. Scholtes, and T. Niendorf. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.” Polymer Testing, 2021. https://doi.org/10.1016/j.polymertesting.2021.107146.
LibreCat | DOI
 
[174]
2021 | Conference Abstract | LibreCat-ID: 21726 | OA
Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development of Hybrid Materials.” In 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
LibreCat | Download (ext.)
 
[173]
2021 | Journal Article | LibreCat-ID: 33895
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials 14, no. 17 (2021). https://doi.org/10.3390/ma14175106.
LibreCat | DOI
 
[172]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin, Sven, Jan Schütte, C. Bäumler, Walter Sextro, and Thomas Tröster. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics 6 (2021). https://doi.org/10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[171]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G, Mathias Bobbert, Marcus Böhme, Christian Dammann, Axel Dittes, Mina Gießmann, Christian Hühne, et al. “Hybridprofile Für Trag- Und Crashstrukturen.” In Intrinsische Hybridverbunde Für Leichtbautragstrukturen. Berlin, Heidelberg, 2021. https://doi.org/10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[170]
2021 | Journal Article | LibreCat-ID: 23431
Cheng, C., Z. Wang, Z. Jin, X. Ju, Swetlana Schweizer, Thomas Tröster, and Rolf Mahnken. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.” Composites Part B: Engineering 224 (2021). https://doi.org/10.1016/j.compositesb.2021.109209.
LibreCat | DOI
 
[169]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A 831 (2021). https://doi.org/10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[168]
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister, Tim, Sven Martin, Thorsten Marten, and Thomas Tröster. “Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases,” 2021.
LibreCat
 
[167]
2021 | Journal Article | LibreCat-ID: 24009
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials, 2021. https://doi.org/10.3390/ma14175106.
LibreCat | DOI
 
[166]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Michael Haase, Jan Gierse, Detmar Zimmer, Thomas Tröster, and Mirko Schaper. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 2021. https://doi.org/10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[165]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, Anatolii Andreiev, Sudipta Pramanik, Kay-Peter Hoyer, Thomas Tröster, and Mirko Schaper. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[164]
2020 | Conference Paper | LibreCat-ID: 20843
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, and Wolfgang Zinn. “Residual Stress Measurement in GFRP/Steel Hybrid Components.” In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[163]
2020 | Conference Paper | LibreCat-ID: 20854 | OA
Camberg, Alan Adam, and Thomas Tröster. “A Simplified Method for the Evaluation of the Layer Compression Test Using One 3D Digital Image Correlation System and Considering the Material Anisotropy by the Equibiaxial Lankford Parameter.” IOP Conference Series: Materials Science and Engineering, 2020. https://doi.org/10.1088/1757-899X/967/1/012077.
LibreCat | DOI | Download (ext.)
 
[162]
2020 | Conference Paper | LibreCat-ID: 20856 | OA
Camberg, Alan Adam, Tobias Erhart, and Thomas Tröster. “Predicting Fracture at Non-Isothermal Forming Conditions: A Temperature Dependent Extension of the LS-DYNA GISSMO Fracture Indicator Framework,” 2020. https://doi.org/10.13140/RG.2.2.23924.17288.
LibreCat | DOI | Download (ext.)
 
[161]
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer, Swetlana, Emine Fulya Akbulut Irmak, and Thomas Tröster. “Wood-Based Materials as a Sustainable Alternative for Future Car Body Construction.” Automotive Circle, 2020.
LibreCat
 
[160]
2020 | Conference Paper | LibreCat-ID: 16939 | OA
Triebus, Marcel, and Thomas Tröster. “A Holistic Approach to Optimization-Based Design of Hybrid Materials.” In Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
LibreCat | Download (ext.)
 
[159]
2020 | Conference Paper | LibreCat-ID: 15490 | OA
Claes, Leander, Elmar Baumhögger, Torben Rüther, Jan Gierse, Thomas Tröster, and Bernd Henning. “Reduction of Systematic Measurement Deviation in Acoustic Absorption Measurement Systems.” In Fortschritte Der Akustik - DAGA 2020, 1077–80, 2020.
LibreCat | Files available
 
[158]
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Numerical Investigation of the Hole-Drilling Method Applied to Intrinsic Manufactured Metal-CFRP Hybrids.” In Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[157]
2020 | Journal Article | LibreCat-ID: 20842
Wu, Tao, Steffen Rainer Tinkloh, Thomas Tröster, Wolfgang Zinn, and Thomas Niendorf. “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method.” Journal of Composites Science, 2020. https://doi.org/10.3390/jcs4030143.
LibreCat | DOI
 
[156]
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar, Deviprasad, Tim Stallmeister, Zheng Wang, and Thomas Tröster. “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED.” In Hybrid 2020 Materials and Structures, edited by Joachim M Hausmann, Marc Siebert, Axel von Hehl, and Kay André Weidenmann, 167–72, 2020.
LibreCat | Files available
 
[155]
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “A Micromechanical-Based Finite Element Simulation of Process-Induced Residual Stresses in Metal-CFRP-Hybrid Structures.” Composite Structures 238 (2020). https://doi.org/10.1016/j.compstruct.2020.111926.
LibreCat | DOI
 
[154]
2020 | Journal Article | LibreCat-ID: 58383
Basavapoornima, Ch., T. Maheswari, Deviprasad Chalicheemalapalli Jayasankar, C.R. Kesavulu, Thomas Tröster, and C.K. Jayasankar. “Thermal, Structural, Mechanical and 1.8 μm Luminescence Properties of the Thulium Doped Pb-K-Al-Na Glasses for Optical Fiber Amplifiers.” Journal of Non-Crystalline Solids 530 (2020). https://doi.org/10.1016/j.jnoncrysol.2019.119773.
LibreCat | DOI
 
[153]
2019 | Report | LibreCat-ID: 21210
Ahlers, Dominik, and Thomas Tröster. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn, 2019. https://doi.org/10.2314/KXP:1695591887.
LibreCat | DOI
 
[152]
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer, Florian, André Dietrich, Thorsten Marten, Thomas Tröster, and Bernard Nacke. “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process.” In Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 585–93, 2019.
LibreCat
 
[151]
2019 | Conference Paper | LibreCat-ID: 16794
Striewe, Jan André, Robert Thomas, Fabian Fischer, Timo Wiens, and Thomas Tröster. “Energieabsorptions- Und Versagensverhalten Eines Automobilen Seitenschwellers Mit Lokaler Verstärkung Aus Kohlenstofffaserverstärktem Kunststoff Nach Alterung.” Sankt Augustin: DGM-Inventum GmbH , 2019.
LibreCat
 
[150]
2019 | Misc | LibreCat-ID: 16825
Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM 2019 Congress & Exhibition – SIS: Optimising the Properties of AM Parts Using Hot Isostatic Pressing. Maastricht: EuroPM, 2019.
LibreCat
 
[149]
2019 | Conference Paper | LibreCat-ID: 16827
Camberg, Alan Adam, and Thomas Tröster. “Challenges in Fracture Modeling under Non-Isothermal Forming Conditions Using the Example of a New Forming Process for Aluminum Blanks.” In 26. Sächsische Fachtagung Umformtechnik, 2019.
LibreCat
 
[148]
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “A Micromechanical Based Finite Element Simulation of Process Induced Residual Stresses in Metal-CFRP-Hybrid Structures,” 2019.
LibreCat
 
[147]
2019 | Journal Article | LibreCat-ID: 15875
Camberg, Alan Adam, Thomas Tröster, F. Bohner, and J. Tölle. “Predicting Plasticity and Fracture of Severe Pre-Strained EN AW-5182 by Yld2000 Yield Locus and Hosford-Coulomb Fracture Model in Sheet Forming Applications.” IOP Conference Series: Materials Science and Engineering 651 (2019): 012057. https://doi.org/10.1088/1757-899X/651/1/012057.
LibreCat | DOI
 
[146]
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak, Emine Fulya, and Thomas Tröster. “Fracture Prediction of Additively Manufactured AlSi10Mg Materials.” Procedia Structural Integrity, 2019, 190–97. https://doi.org/10.1016/j.prostr.2019.12.101.
LibreCat | DOI
 
[145]
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak, Emine Fulya, Julius Hanses, Swetlana Schweizer, and Thomas Tröster. “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” 2019.
LibreCat
 
[144]
2019 | Report | LibreCat-ID: 16029
Marten, Thorsten, and Thomas Tröster. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 16030
Triebus, Marcel, S. Bienia, Thorsten Marten, Thomas Tröster, and K. Dröder. “Press Hardening Integrated Structuring for Hybrid Components.” Verlag Wissenschaftliche Scripten, 2019.
LibreCat
 
[142]
2019 | Book Chapter | LibreCat-ID: 13436
Camberg, Alan Adam, Ina Stratmann, and Thomas Tröster. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” In Technologies for Economical and Functional Lightweight Design. Berlin, Heidelberg, 2019. https://doi.org/10.1007/978-3-662-58206-0_12.
LibreCat | DOI
 
[141]
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Self-Sealing Tool Concept for RTM-Processes,” 2019.
LibreCat
 
[140]
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister, Tim, Deviprasad Chalicheemalapalli Jayasankar, Z. Wang, and Thomas Tröster. “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” 2019.
LibreCat
 
[139]
2019 | Conference Paper | LibreCat-ID: 16027
Camberg, Alan Adam, Marius Striewe, Thomas Tröster, F. Bohner, and J. Tölle. “Investigation of Ductility and Fracture Behavior of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” In 5th MATFEM Conference. München: MATFEM, 2019.
LibreCat
 
[138]
2019 | Book | LibreCat-ID: 16795
Striewe, Jan André, Thomas Tröster, Jannik Kowatz, Gerson Meschut, Richard Grothe, and Guido Grundmeier. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat
 
[137]
2019 | Conference Paper | LibreCat-ID: 16028
Grothe, R., Jan André Striewe, Jannik Kowatz, Guido Grundmeier, Thomas Tröster, and Gerson Meschut. “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” 2019.
LibreCat
 
[136]
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg, Alan Adam, Thomas Tröster, Nikolay Sotirov, Jörn Tölle, and Friedrich Bohner. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” In Materials Science and Engineering (MSE) Congress 2018. Darmstadt, 2018.
LibreCat
 
[135]
2018 | Misc | LibreCat-ID: 6594
Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
 
[134]
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski, Nathalie, Junhe Lian, Alan Adam Camberg, Thomas Tröster, Sebastian Münstermann, Wolfgang Bleck, Helmut Gese, and Helmut Richter. “Forming Limit Curves of DP600 Determined in High-Speed Nakajima Tests and Predicted by Two Different Strain-Rate-Sensitive Models,” 2018. https://doi.org/10.1063/1.5035024.
LibreCat | DOI
 
[133]
2018 | Conference Paper | LibreCat-ID: 16034
Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.” In HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS. DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat
 
[132]
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, Dominik, and Thomas Tröster. “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 16040
Wang, Z., and Thomas Tröster. “Influences of Interface on the Adhesion and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted Resin Transfer Moulding,” 2018.
LibreCat
 
[130]
2018 | Conference Paper | LibreCat-ID: 16042 | OA
Triebus, Marcel, Thomas Tröster, Alan Adam Camberg, S. Bienia, and K. Dröder. “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.” In 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[129]
2018 | Conference Paper | LibreCat-ID: 16043 | OA
Camberg, Alan Adam, Thomas Tröster, A. Schneidt , N. Sotirov , and J. Tölle. “The Influence of Damage Accumulation on Failure Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal Sheet Metal Forming.” In 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[128]
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer, Swetlana, and Thomas Tröster. “Holz als Werkstoff im Automobil,” 2018.
LibreCat
 
[127]
2018 | Conference Paper | LibreCat-ID: 16057
Wang, Z., and Thomas Tröster. “Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess,” 2018.
LibreCat
 
[126]
2018 | Journal Article | LibreCat-ID: 13439
Camberg, Alan Adam, F Bohner, J Tölle, A Schneidt, S Meiners, and Thomas Tröster. “Formability Enhancement of EN AW-5182 H18 Aluminum Alloy Sheet Metal Parts in a Flash Forming Process: Testing, Calibration and Evaluation of Fracture Models.” IOP Conference Series: Materials Science and Engineering, 2018. https://doi.org/10.1088/1757-899x/418/1/012018.
LibreCat | DOI
 
[125]
2018 | Conference Paper | LibreCat-ID: 16052
Horwath, Ilona, Silvia Dohmeier-Fischer, Nathalie Weiß-Borkowski, and Thomas Tröster. “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.” In INTED2018 Proceedings, 2018. https://doi.org/10.21125/inted.2018.1651.
LibreCat | DOI
 
[124]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[123]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, Thomas Tröster, S. Hermann, P. Koppa, P. Gloetter, Mirko Schaper, M. Peters, M. Burns, F. Hengsbach, and A. Altmann. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” In Contributed Papers from MS&T17, 2018. https://doi.org/10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[122]
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski, Nathalie, Ilona Horwath, A. Berscheid, Silvia Dohmeier-Fischer, and Thomas Tröster. “NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH.” In INTED2018 Proceedings, 2018. https://doi.org/10.21125/inted.2018.1298.
LibreCat | DOI
 
[121]
2018 | Conference Paper | LibreCat-ID: 16035
Striewe, Jan André, R. Grothe, Jannik Kowatz, Thomas Tröster, Guido Grundmeier, and Gerson Meschut. “Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness,” 2018.
LibreCat
 
[120]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, Thomas Tröster, Thomas Heggemann, H. Homberg, Mirko Schaper, J. Dietrich, Wolfgang Bremser, et al. “LHYBS – Lightweight Design by Novel Hybrid Materials,” 2018.
LibreCat
 
[119]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., Z. Wang, Thomas Tröster, and Mirko Schaper. “Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM,” 2018.
LibreCat
 
[118]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[117]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, Peter Koppa, Martin Joachim Holzweissig, Mehmet Esat Aydinöz, Alexander Taube, Kay-Peter Hoyer, Oleksiy Starykov, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing 3, no. 4 (2018): 221–31. https://doi.org/10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[116]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, Mathias Bobbert, Christian Dammann, Zheng Wang, Thomas Tröster, Rolf Mahnken, Gerson Meschut, and Mirko Schaper. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, 173–85. https://doi.org/10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[115]
2017 | Conference Paper | LibreCat-ID: 6559
Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd Henning. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic Measurement Applications.” In Proceedings of Meetings on Acoustics, 030004. Honolulu, 2017. https://doi.org/10.1121/2.0000688.
LibreCat | DOI
 
[114]
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas Tröster. “Investigation of Geometrical Discontinuities in Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating,” 2017.
LibreCat
 
[113]
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas Tröster. “Effects of Holes in Blanks for Press Hardening Process Due to Induction Heating,” 2017.
LibreCat
 
[112]
2017 | Journal Article | LibreCat-ID: 15941
Reuter, Corin, Kim-Henning Sauerland, and Thomas Tröster. “Experimental and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.” Composite Structures, 2017, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052.
LibreCat | DOI
 
[111]
2017 | Journal Article | LibreCat-ID: 15942
Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures 117 (2017): 1–9. https://doi.org/10.1016/j.tws.2017.03.034.
LibreCat | DOI
 
[110]
2017 | Journal Article | LibreCat-ID: 15944
Striewe, Jan André, Corin Reuter, Kim-Henning Sauerland, and Thomas Tröster. “Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.” Thin-Walled Structures, 2017, 501–8. https://doi.org/10.1016/j.tws.2017.11.011.
LibreCat | DOI
 
[109]
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski, Nathalie, Juhne Lian, Thorsten Marten, Thomas Tröster, Sebastian Münstermann, and Wolfgang Bleck. “Forming Limit Curves Determined in High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” In Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017. https://doi.org/10.1063/1.5007961.
LibreCat | DOI
 
[108]
2017 | Journal Article | LibreCat-ID: 16062
Schweizer, Swetlana, Anna Becker-Staines, and Thomas Tröster. “Separation of Hybrid Structures for the Reclaim of Their Single Components.” Key Engineering Materials, 2017, 568–75. https://doi.org/10.4028/www.scientific.net/kem.742.568.
LibreCat | DOI
 
[107]
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
LibreCat
 
[106]
2017 | Conference Paper | LibreCat-ID: 16065
Kutz, P., Z. Wang, M. Ellouz, T. Kordisch, and Thomas Tröster. “Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,” 2017.
LibreCat
 
[105]
2017 | Conference Paper | LibreCat-ID: 16071
Wang, Z., P. Kutz, and Thomas Tröster. “Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,” 2017.
LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten. “Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
LibreCat
 
[103]
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken. “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates,” 2017.
LibreCat
 
[102]
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive Fertigung,” 2017.
LibreCat
 
[101]
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in der additiven Fertigung,” 2017.
LibreCat
 
[100]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, Peter Koppa, F. Hengsbach, P. Gloetter, A. Altmann, Mirko Schaper, and Thomas Tröster. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” In Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[99]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[98]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, Peter Koppa, Kristina Duschik, Martin Joachim Holzweissig, Madison Burns, Jens Nellesen, Wolfgang Tillmann, Thomas Tröster, Kay-Peter Hoyer, and Mirko Schaper. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design 133 (2017): 136–42. https://doi.org/10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[97]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2017. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[96]
2016 | Journal Article | LibreCat-ID: 15962
Tröster, Thomas, Alan Adam Camberg, Bamned Sanitther, Zheng Wang, and Christian Lauter. “Manufacturing and Investigation of Steel-CFRP Hybrid Pillar Structures for Automotive Applications by Intrinsic Resin Transfer Moulding Technology.” International Journal of Automotive Composites 2 (2016): 229–43. https://doi.org/10.1504/ijautoc.2016.10005304.
LibreCat | DOI
 
[95]
2016 | Journal Article | LibreCat-ID: 16139
Schweizer, Swetlana, and Thomas Tröster. “Recyclingkonzepte für hybride Strukturen.” Carbon Composites Magazin, no. 2 (2016): 23.
LibreCat
 
[94]
2016 | Journal Article | LibreCat-ID: 16146
Grienitz, Volker, Thomas Tröster, and Stefan Meiners. “Technikevaluation für die generative Fertigung eines Serien-Radträgers.” ATZ - Automobiltechnische Zeitschrift, 2016, 36–41. https://doi.org/10.1007/s35148-016-0090-5.
LibreCat | DOI
 
[93]
2016 | Conference Paper | LibreCat-ID: 16264
Wang, Z., and Thomas Tröster. “Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren,” 2016.
LibreCat
 
[92]
2016 | Conference Paper | LibreCat-ID: 16266
Striewe, Jan André, C. Reuter, C. Oberkönig, C. Lauter, and Thomas Tröster. “Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe,” 2016.
LibreCat
 
[91]
2016 | Conference Paper | LibreCat-ID: 16267
Striewe, Jan André, C. Lauter, C. Reuter, and Thomas Tröster. “Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites,” 2016.
LibreCat
 
[90]
2016 | Conference Paper | LibreCat-ID: 16268
Striewe, Jan André, C. Reuter, C. Lauter, and Thomas Tröster. “Innovative Largescale Production Process for Multilayered Sheet-Metal-FRP-Structures,” 2016.
LibreCat
 
[89]
2016 | Conference Paper | LibreCat-ID: 16269
Wang, Z., C. Lauter, Julian Löseke, and Thomas Tröster. “CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications,” 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., Dominik Ahlers, and Thomas Tröster. “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten.” Der Stahlformenbauer , no. 5 (2016).
LibreCat
 
[87]
2016 | Journal Article | LibreCat-ID: 16137
Lauter, Christian, Corin Reuter, Shuang Wu, and Thomas Tröster. “Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology.” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering 10, no. 5 (2016): 875–80. https://doi.org/doi.org/10.5281/zenodo.1124481.
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites 2 (2016): 272–98. https://doi.org/10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[85]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Mirko Schaper, and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” 2016.
LibreCat
 
[84]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., Mathias Bobbert, C. Dammann, Z. Wang, Mirko Schaper, Gerson Meschut, Rolf Mahnken, and Thomas Tröster. “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” 2016.
LibreCat
 
[83]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert, Mathias, Florian Augethaler, Zheng Wang, Thomas Tröster, and Gerson Meschut. “Novel Process Approach for In-Situ Insertion of Functional Elements in RTM-Applications.” Journal of Materials Science Research, 2016. https://doi.org/10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[82]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster, Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[81]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[80]
2015 | Journal Article | LibreCat-ID: 15964
Leuders, Stefan, Malte Vollmer, Florian Brenne, Thomas Tröster, and Thomas Niendorf. “Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting.” Metallurgical and Materials Transactions A, 2015, 3816–23. https://doi.org/10.1007/s11661-015-2864-x.
LibreCat | DOI
 
[79]
2015 | Conference Paper | LibreCat-ID: 16131
Marten, Thorsten, Holger Block, and Thomas Tröster. “Partial Hardening of New Press Hardenable Steels,” 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski, Nathalie, Thorsten Marten, Holger Block, and Thomas Tröster. “Multi-Axial Material Testing at High Strain Rates in High Speed Cupping Tests,” 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16135
Frantz, M., C. Lauter, Z. Wang, and Thomas Tröster. “Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK),” 139–44. Verlag Stahleisen GmbH, 2015.
LibreCat
 
[76]
2015 | Conference Paper | LibreCat-ID: 16136
Reuter, C., Thomas Tröster, and C. Lauter. “Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna,” 127–32. Verlag Stahleisen GmbH, 2015.
LibreCat
 
[75]
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik, W., S. Leuders, A. Riemer, Thomas Tröster, H. A. Richard, and T. Niendorf. “Fatigue Life Prediction for Metals Processed by Selective Laser Melting Using Finite Element Analyses,” 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16259
Wang, Z., C. Lauter, B. Sanitther, M. Frantz, and Thomas Tröster. “Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding,” 2015.
LibreCat
 
[73]
2015 | Conference Paper | LibreCat-ID: 16260
Lauter, C., Z. Wang, Thomas Tröster, R. Brandis, and D. Köchling. “Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design,” 2015.
LibreCat
 
[72]
2015 | Conference Paper | LibreCat-ID: 16261
Leuders, S., S. Meiners, A. Taube, Thomas Tröster, and T. Niendorf. “Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting,” 2015.
LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach, Nils, and Thomas Tröster. “Material Follows Form Follows Function,” 2015.
LibreCat
 
[70]
2015 | Conference Paper | LibreCat-ID: 16133
Lauter, C., Z. Wang, Isabel Koke, and Thomas Tröster. “Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology,” 2015.
LibreCat
 
[69]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Gerson Meschut, Mirko Schaper, and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” 2015.
LibreCat
 
[68]
2015 | Conference Paper | LibreCat-ID: 23061
Lauter, Christian, Zheng Wang, Isabel Koke, and Thomas Tröster. “Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology.” In 20th International Conference on Composite Materials, Copenhagen, 2015.
LibreCat
 
[67]
2014 | Journal Article | LibreCat-ID: 15966
Niendorf, Thomas, Stefan Leuders, Andre Riemer, Florian Brenne, Thomas Tröster, Hans Albert Richard, and Dieter Schwarze. “Functionally Graded Alloys Obtained by Additive Manufacturing.” Advanced Engineering Materials, 2014, 857–61. https://doi.org/10.1002/adem.201300579.
LibreCat | DOI
 
[66]
2014 | Journal Article | LibreCat-ID: 15967
Riemer, A., S. Leuders, M. Thöne, H.A. Richard, Thomas Tröster, and T. Niendorf. “On the Fatigue Crack Growth Behavior in 316L Stainless Steel Manufactured by Selective Laser Melting.” Engineering Fracture Mechanics, 2014, 15–25. https://doi.org/10.1016/j.engfracmech.2014.03.008.
LibreCat | DOI
 
[65]
2014 | Conference Paper | LibreCat-ID: 16097
Klein, M., D. Hülsbusch, F. Walther, M. Bartsch, J. Hausmann, M. Frantz, C. Lauter, and Thomas Tröster. “Characterization of the Corrosion Influence on the Fatigue Behavior of Intrinsic CFRP-Steel-Hybrids,” 188–93, 2014.
LibreCat
 
[64]
2014 | Conference Paper | LibreCat-ID: 16099
Frantz, M, Christian Lauter, Thomas Tröster, J. Hausmann, M. Bartsch, D Hülsbusch, and F. Walther. “Efficient Manufacturing of Hybrid Structures Consisting of Steel and CFRP with Using Residual Heat / Effiziente Herstellung von Hybridbauteilen Aus Stahl Und CFK Mithilfe von Restwärmeausnutzung,” 2014.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16120
Block, Holger, Thorsten Marten, and Thomas Tröster. “Crash Simulation of High Strength Automotive Components Using Advanced Failure Models,” 2014.
LibreCat
 
[62]
2014 | Journal Article | LibreCat-ID: 16122
Lauter, Christian, Joerg Niewel, and Thomas Tröster. “Quasistatic and Crash Tests of Steel-CFRP Hybrid Pillar Structures for Automotive Applications.” International Journal of Automotive Composites, 2014. https://doi.org/10.1504/ijautoc.2014.064127.
LibreCat | DOI
 
[61]
2014 | Conference Paper | LibreCat-ID: 16128
Block, Holger, Thorsten Marten, Nathalie Weiß Borkowski, and Thomas Tröster. “Crash Performance of the New Press Hardenable Steel 15MnB6,” 2014.
LibreCat
 
[60]
2014 | Conference Paper | LibreCat-ID: 16129
Reuter, Corin, Dominik Flore, Simon Pöhler, Kim Henning Sauerland, and Thomas Tröster. “Numerical Simulation of the Energy Absorption of Fiber-Reinforced Plastics,” 2014.
LibreCat
 
[59]
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski, Nathalie, Thorsten Marten, and Thomas Tröster. “Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch,” 2014.
LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16255
Leuders, S., A. Riemer, H. A. Richard, Thomas Tröster, and T. Niendorf. “Selective-Laser-Melting Materials under Cyclic Loading: Influence of Process-Inherent Defects on the Initiation and Propagation of Fatigue Cracks,” 2014.
LibreCat
 
[57]
2014 | Conference Paper | LibreCat-ID: 16256
Leuders, S., Thomas Tröster, F. Brenne, A. Riemer, H. A. Richard, and T. Niendorf. “Evaluation of the Effect of Defects on the Mechanical Performance of Components Manufactured by Selective Laser Melting,” 2014.
LibreCat
 
[56]
2014 | Conference Paper | LibreCat-ID: 16257
Leuders, S., Thomas Tröster, A. Riemer, H. A. Richard, and T. Niendorf. “On the Mechanical Performance of Structures Manufactured by Selective Laser Melting: Damage Initiation and Propagation,” 2014.
LibreCat
 
[55]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, Tobias Lieneke, Stefan Lammers, Thomas Tröster, and Thomas Niendorf. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, 1911–19. https://doi.org/10.1557/jmr.2014.157.
LibreCat | DOI
 
[54]
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer, Elmar, C. Budde, Thomas Tröster, and Simon Pöhler. “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” 101–8, 2014.
LibreCat
 
[53]
2014 | Journal Article | LibreCat-ID: 16125
Moritzer, Elmar, C. Budde, Thomas Tröster, and Simon Pöhler. “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination.” Joining Plastics 8, no. 2 (2014): 100–105.
LibreCat
 
[52]
2013 | Journal Article | LibreCat-ID: 15968
Niendorf, Thomas, Stefan Leuders, Andre Riemer, Hans Albert Richard, Thomas Tröster, and Dieter Schwarze. “Highly Anisotropic Steel Processed by Selective Laser Melting.” Metallurgical and Materials Transactions B, 2013, 794–96. https://doi.org/10.1007/s11663-013-9875-z.
LibreCat | DOI
 
[51]
2013 | Journal Article | LibreCat-ID: 16016
Riemer, Andre, S. Leuders, Hans A. Richard, and Thomas Tröster. “Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗.” Materials Testing, 2013, 537–43. https://doi.org/10.3139/120.110468.
LibreCat | DOI
 
[50]
2013 | Conference Paper | LibreCat-ID: 16017
Marten, Thorsten, Holger Block, Thomas Tröster, Thomas Gerber, Sascha Sikora, and Franz-Josef Lenze. “Graded Lightweight Structures Through Hot Forming,” 2013.
LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16018
Lauter, Christian, T. Hochschulz, Meike Frantz, and Thomas Tröster. “Influences of Automotive Process Characteristics on Hybrid Structures,” 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16019
Siewers, Bernd, Christian Lauter, and Thomas Tröster. “Curing of Fibre Reinforced Plastics by Resistance Heating of Sheet Metal in a Hybrid Structure,” 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16020
Tröster, Thomas, Christian Lauter, and C. Reuter. “Crashworthiness of Hybrid Structures,” 2013.
LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16021
Siewers, Bernd, Christian Lauter, and Thomas Tröster. “Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures,” 2013.
LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16022
Lauter, Christian, T. Krooß, and Thomas Tröster. “Manufacturing of Hybrid Structures by Prepreg Press Technology,” 2013.
LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16023
Tröster, Thomas, Christian Lauter, and C. Reuter. “Leichtbau mit Hybridstrukturen im Automobil,” 2013.
LibreCat
 
[43]
2013 | Conference Paper | LibreCat-ID: 16024
Leuders, S., A. Riemer, T. Niendorf, H. A. Richard, and Thomas Tröster. “On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects,” 2013.
LibreCat
 
[42]
2013 | Conference Paper | LibreCat-ID: 16025
Marten, Thorsten, Holger Block, and Thomas Tröster. “Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess,” 2013.
LibreCat
 
[41]
2013 | Conference Paper | LibreCat-ID: 16026
Riemer, A., S. Leuders, H. A. Richard, and Thomas Tröster. “Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen,” 2013.
LibreCat
 
[40]
2013 | Book Chapter | LibreCat-ID: 16096
Lauter, Christian, Thomas Tröster, and Corin Reuter. “Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications.” In Advanced Composite Materials for Automotive Applications. Chichester, UK, 2013. https://doi.org/10.1002/9781118535288.ch7.
LibreCat | DOI
 
[39]
2012 | Journal Article | LibreCat-ID: 15981
Tröster, Thomas, Thorsten Marten, Dieter Thomas, Holger Block, Christian Lauter, and Markus Thöne. “Automobilleichtbau mit innovativen Werkstoffen und Prozessen.” Forschungsforum Paderborn 15, no. 15/2012 (2012): 30–38.
LibreCat
 
[38]
2012 | Journal Article | LibreCat-ID: 15983
Lauter, Christian, Simon Werneke, Bernd Siewers, and Thomas Tröster. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.” Lightweight Design, 2012, 53–58. https://doi.org/10.1365/s35725-012-0079-2.
LibreCat | DOI
 
[37]
2012 | Conference Paper | LibreCat-ID: 15985
Reuter, Corin, Meike Frantz, Christian Lauter, Holger Block, and Thomas Tröster. “Simulation and Testing of Hybrid Structures Consisting of Press-Hardened Steel and CFRP,” 2012.
LibreCat
 
[36]
2012 | Conference Paper | LibreCat-ID: 15987
Lauter, Christian, Meike Frantz, J. P. Kohler, and Thomas Tröster. “Crash Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” 2012.
LibreCat
 
[35]
2012 | Conference Paper | LibreCat-ID: 15988
Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Joining Technologies for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics,” 2012.
LibreCat
 
[34]
2012 | Journal Article | LibreCat-ID: 15989
Ickert, Leif, Dieter Thomas, Thomas Tröster, and Lutz Eckstein. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.” FAT-Schriftenreihe 244, no. 244 (2012).
LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16004
Lauter, Christian, Bernd Siewers, B. Zanft, and Thomas Tröster. “Crash Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” 2012.
LibreCat
 
[32]
2012 | Conference Paper | LibreCat-ID: 16007
Thöne, M., S. Leuders, A. Riemer, Thomas Tröster, and H. A. Richard. “Influence of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V,” 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16008
Riemer, A., S. Leuders, Thomas Tröster, and H. A. Richard. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, 2012.
LibreCat
 
[30]
2012 | Conference Paper | LibreCat-ID: 16009
Leuders, S., A. Riemer, Thomas Tröster, and H. A. Richard. “Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement,” 2012.
LibreCat
 
[29]
2012 | Report | LibreCat-ID: 16012
Tröster, Thomas, Thorsten Marten, Stefan Adelbert, and Abdel Kadim. P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat
 
[28]
2012 | Journal Article | LibreCat-ID: 16015
Leuders, S., M. Thöne, A. Riemer, T. Niendorf, Thomas Tröster, H.A. Richard, and H.J. Maier. “On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance.” International Journal of Fatigue, 2012, 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.011.
LibreCat | DOI
 
[27]
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, Hans Christian, Ulf Damerow, Christian Lauter, Bernhard Gorny, Frederik Hankeln, Werner Homberg, Thomas Tröster, Hans Jürgen Maier, and Rolf Mahnken. “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.” Key Engineering Materials, 2012, 295–300. https://doi.org/10.4028/www.scientific.net/kem.504-506.295.
LibreCat | DOI
 
[26]
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., Frederik Hankeln, Christian Lauter, H. C. Schmidt, U. Damerow, Rolf Mahnken, H. J. Maier, Thomas Tröster, and Werner Homberg. “Simulation and Manufacturing of Deep Drawn Parts Reinforced by Carbon Fibre Prepregs,” 2012.
LibreCat
 
[25]
2012 | Journal Article | LibreCat-ID: 16010
Lauter, Christian, Thomas Tröster, Rinje Brandis, and Jürgen Gausemeier. “Methodik für die Produktentstehung hybrider Leichtbaustrukturen.” Lightweight Design 5 (2012): 50–56. https://doi.org/10.1365/s35725-013-0137-4.
LibreCat | DOI
 
[24]
2011 | Journal Article | LibreCat-ID: 15969
Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Multimaterialsysteme höchstfest verbunden.” Adhäsion – Kleben und Dichten 3/2011 (2011): 39–43.
LibreCat
 
[23]
2011 | Conference Paper | LibreCat-ID: 15971
Frantz, Meike, O. Stübbe, Christian Lauter, J. Schrange, and Thomas Tröster. “Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder,” 2011.
LibreCat
 
[22]
2011 | Conference Paper | LibreCat-ID: 15972
Thomas, D., H. Block, Thomas Tröster, and J. Krogmeier. “Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,” 2011.
LibreCat
 
[21]
2011 | Journal Article | LibreCat-ID: 15974
Marten, Thorsten, Christian Lauter, and Thomas Tröster. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.” Ingenieurspiegel 2/2011 (2011): 67–69.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 15975
Lauter, Christian, D. Thomas, Meike Frantz, J. Niewel, and Thomas Tröster. “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen.” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte 2 (2011): 6–7.
LibreCat
 
[19]
2011 | Journal Article | LibreCat-ID: 15980
Lauter, Christian, Meike Frantz, Bernd Siewers, and Thomas Tröster. “Hybrid Structures for Tailored Structural Automotive Components.” JEC Composites Magazine 69 (2011): 35–37.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15990
Thomas, D., H. Block, and Thomas Tröster. “Production of Load-Adapted Lightweight Designs by Partial Hardening,” 2011.
LibreCat
 
[17]
2011 | Journal Article | LibreCat-ID: 15992
Gorny, B., T. Niendorf, J. Lackmann, M. Thoene, Thomas Tröster, and H.J. Maier. “In Situ Characterization of the Deformation and Failure Behavior of Non-Stochastic Porous Structures Processed by Selective Laser Melting.” Materials Science and Engineering: A 528, no. 27 (2011): 7962–67. https://doi.org/10.1016/j.msea.2011.07.026.
LibreCat | DOI
 
[16]
2011 | Journal Article | LibreCat-ID: 15993
Lauter, Christian, Meike Frantz, and Thomas Tröster. “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen.” Lightweight Design 4 (2011): 48–54.
LibreCat
 
[15]
2011 | Conference Paper | LibreCat-ID: 15996
Frantz, Meike, Christian Lauter, and Thomas Tröster. “Advanced Manufacturing Technologies for Automotive Structures in Multi-Material Design Consisting of High-Strength Steels and CFRP,” 2011.
LibreCat
 
[14]
2011 | Journal Article | LibreCat-ID: 15997
Lauter, Christian, Meike Frantz, Thorsten Marten, Thomas Tröster, G. Bach, and G. Seliger. “Höchstfeste Hybridwerkstoffe aus Stahl und Faserverbundkunststoffen.” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 09/2011 (2011).
LibreCat
 
[13]
2011 | Journal Article | LibreCat-ID: 15998
Frantz, Meike, Christian Lauter, and Thomas Tröster. “Schadensdetektion in hybriden Metall-Faserverbundkunststoff-Konstruktionen.” Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, no. 10/2011 (2011).
LibreCat
 
[12]
2011 | Conference Paper | LibreCat-ID: 15999
Marten, Thorsten, Thomas Tröster, S. Adelbert, and A. Kadim. “Fluidized Bed Heating of Blanks for the Hot Forming Process,” 2011.
LibreCat
 
[11]
2011 | Conference Paper | LibreCat-ID: 16002
Tröster, Thomas, and Christian Lauter. “Hybridstrukturen für den automobilen Leichtbau,” 2011.
LibreCat
 
[10]
2011 | Journal Article | LibreCat-ID: 16013
Lauter, Christian, Meike Frantz, and Thomas Tröster. “Großserientaugliche Herstellung von Hybridwerkstoffen durch Prepregpressen.” Lightweight Design 4 (2011): 48–54. https://doi.org/10.1365/s35725-011-0044-5.
LibreCat | DOI
 
[9]
2011 | Journal Article | LibreCat-ID: 16000
Marten, Thorsten, J. Niewel, and Thomas Tröster. “Untersuchung alternativer Erwärmungsverfahren für den Presshärteprozess.” HTM Journal of Heat Treatment and Materials, 2011, 309–15. https://doi.org/10.3139/105.110119.
LibreCat | DOI
 
[8]
2011 | Conference Paper | LibreCat-ID: 15970
Lauter, Christian, Ulf Damerow, Meike Frantz, Thomas Tröster, and Werner Homberg. “Produktionsverfahren Zur Herstellung Höchstfester Hybrider Leichtbaustrukturen Für Den Einsatz Im Automobil,” 2011.
LibreCat
 
[7]
2011 | Conference Paper | LibreCat-ID: 15991
Lauter, Christian, J. Dau, Thomas Tröster, and Werner Homberg. “Manufacturing Processes for Automotive Structures in Multi-Material Design Consisting of Sheet Metal and CFRP Prepregs,” 2011.
LibreCat
 
[6]
2011 | Conference Paper | LibreCat-ID: 15994
Dau, J., Christian Lauter, U. Damerow, Werner Homberg, and Thomas Tröster. “Multi-Material Systems for Tailored Automotive Structural Components,” 2011.
LibreCat
 
[5]
2009 | Journal Article | LibreCat-ID: 15953
Böke, Johannes, Rüdiger Erhardt, Wilfried Rostek, and Thomas Tröster. “Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau*.” Materials Testing, 2009, 22–27. https://doi.org/10.3139/120.110002.
LibreCat | DOI
 
[4]
2008 | Conference Paper | LibreCat-ID: 15954
Tröster, Thomas, C. Howe, M. Müller, and W. Rostek. “Development Status and Market Potential of Hot Formed Ballistic Steels,” 2008.
LibreCat
 
[3]
2008 | Conference Paper | LibreCat-ID: 33878
Tröster, Thomas, W. Rostek, J. Böke, and R. Erhardt. “Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau.” In Ein wesentlicher Beitrag zur Klimadebatte, edited by DVM, Vol. 675. DVM-Bericht, 2008.
LibreCat
 
[2]
2007 | Book | LibreCat-ID: 33880
Tröster, Thomas, and J. Berg. Ermittlung dynamischer Grenzformänderungsdiagramme für Karosseriestähle. Vol. P727. Bericht der Forschungsvereinigung Stahlanwendung. Düsseldorf: Verlag- und Vertriebsgesellschaft Düsseldorf, 2007.
LibreCat
 
[1]
2004 | Conference Paper | LibreCat-ID: 33881
Tröster, Thomas, and W. Rostek. “Innovative Warmumformung.” In Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung” in Fellbach, edited by Thomas Tröster and W. Rostek, 51–66. Neuere Entwicklungen in der Blechumformung : [Vortragstexte zur Veranstaltung Internationale Konferenz “Neuere Entwicklungen in der Blechumformung.” Fellbach, 2004.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: Chicago

Export / Embed