Thomas Tröster

thomas.troester@uni-paderborn.de
ID
553

217 Publications

Mark all

[217]
2023 | Journal Article | LibreCat-ID: 43464 | OA
M. Ostermann et al., “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures,” Energies, vol. 16, no. 8, Art. no. 3371, 2023, doi: 10.3390/en16083371.
LibreCat | DOI | Download (ext.)
 
[216]
2023 | Conference Paper | LibreCat-ID: 44154
J. Lückenkötter, J. P. Leimbach, T. Stallmeister, T. Marten, and T. Tröster, “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector,” in Materials Research Proceedings, Krakow, Poland, 2023, vol. 28, pp. 249–258, doi: 10.21741/9781644902479-27.
LibreCat | DOI
 
[215]
2023 | Conference Paper | LibreCat-ID: 44502
M. Ostermann et al., “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility,” in Towards the New Normal in Mobility, Duisburg, 2023, doi: 10.1007/978-3-658-39438-7_25.
LibreCat | DOI
 
[214]
2023 | Journal Article | LibreCat-ID: 37200
S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, and T. Tröster, “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709,” Crystals, vol. 13, no. 2, Art. no. 157, 2023, doi: 10.3390/cryst13020157.
LibreCat | DOI
 
[213]
2023 | Journal Article | LibreCat-ID: 45782 | OA
J. Grenz et al., “Integrating Prospective LCA in the Development of Automotive Components,” Sustainability, vol. 15, no. 13, Art. no. 10041, 2023, doi: 10.3390/su151310041.
LibreCat | Files available | DOI | Download (ext.)
 
[212]
2023 | Journal Article | LibreCat-ID: 46486
F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, and T. Tröster, “Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes,” Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 11, no. 3, pp. 1–20, 2023, doi: 10.13044/j.sdewes.d11.0450.
LibreCat | DOI
 
[211]
2023 | Conference Abstract | LibreCat-ID: 42459
M. Ostermann, J. Behm, T. Marten, and T. Tröster, “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen,” presented at the WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, Stuttgart, 2023.
LibreCat
 
[210]
2023 | Journal Article | LibreCat-ID: 46495
S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process,” The Journal of Adhesion, pp. 1–29, 2023, doi: 10.1080/00218464.2023.2245758.
LibreCat | DOI
 
[209]
2023 | Journal Article | LibreCat-ID: 46494
J. Freund et al., “Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints,” The Journal of Adhesion, pp. 1–31, 2023, doi: 10.1080/00218464.2023.2223475.
LibreCat | DOI
 
[208]
2023 | Journal Article | LibreCat-ID: 47536
T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster, “Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology,” International Journal of Material Forming, vol. 16, no. 6, Art. no. 59, 2023, doi: 10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[207]
2023 | Conference Paper | LibreCat-ID: 48597
S. Wu et al., “Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg,” presented at the 23rd International Conference on Composite Materials (ICCM23 2023), 2023.
LibreCat
 
[206]
2023 | Book Chapter | LibreCat-ID: 48643
E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III: Challenges of lightweight design, vehicles, and rescuers,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, Bielefeld, Germany: transcript Verlag, 2023.
LibreCat | DOI
 
[205]
2023 | Conference Paper | LibreCat-ID: 48586
J. Lückenkötter, S. Aydin, T. Marten, and T. Tröster, “Analysis and Optimization of Joint Formation in Hybrid Compression Molding,” presented at the 23nd International Conference on Composite Materials (ICCM23 2023), Belfast, 2023.
LibreCat
 
[204]
2023 | Conference Paper | LibreCat-ID: 49436
M. A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, and T. Tröster, “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess,” in Workshop Warmblechumformung, Fürth, 2023, vol. 18, pp. 99–118.
LibreCat
 
[203]
2023 | Conference Paper | LibreCat-ID: 50742 | OA
C. Bödger, S. Gnaase, D. Lehnert, and T. Tröster, “Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718,” presented at the Solid Freeform Fabrication, Austin, 2023.
LibreCat | Files available | Download (ext.)
 
[202]
2023 | Conference Abstract | LibreCat-ID: 45831
D. Chalicheemalapalli Jayasankar, T. Stallmeister, J. Lückenkötter, and T. Tröster, “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” presented at the 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway , 2023.
LibreCat | Files available
 
[201]
2022 | Newspaper Article | LibreCat-ID: 33001
C. Linnig and T. Tröster, “Sauber recyceln- Innovative Verfahrenskombination mit Ultraschall ermöglicht sicheren Umgang mit recycelten Carbonfasern,” CU reports, 2022.
LibreCat
 
[200]
2022 | Conference Abstract | LibreCat-ID: 37258
S. Haller, S. R. Tinkloh, T. Tröster, and R. Brandt, “The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element,” presented at the 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
 
[199]
2022 | Conference Paper | LibreCat-ID: 32819
F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, and G. Grundmeier, “Investigation on hot sheet metal forming by means of a longitudinal flux inductor,” presented at the 6th International Conference on Steels in Cars and Trucks, Mailand, 2022.
LibreCat
 
[198]
2022 | Journal Article | LibreCat-ID: 34097
D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,” Advanced Composite Materials, pp. 1–16, 2022, doi: 10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[197]
2022 | Journal Article | LibreCat-ID: 31496
T. Wu et al., “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects,” Journal of Composites Science, vol. 6, no. 5, Art. no. 138, 2022, doi: 10.3390/jcs6050138.
LibreCat | DOI
 
[196]
2022 | Journal Article | LibreCat-ID: 34069
B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100133, 2022, doi: 10.1016/j.jajp.2022.100133.
LibreCat | DOI
 
[195]
2022 | Journal Article | LibreCat-ID: 32814
T. Wu et al., “Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction,” Composite Structures, Art. no. 116071, 2022, doi: 10.1016/j.compstruct.2022.116071.
LibreCat | DOI
 
[194]
2022 | Journal Article | LibreCat-ID: 29951 | OA
S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,” Production Engineering, 2022, doi: 10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[193]
2022 | Journal Article | LibreCat-ID: 32813 | OA
S. Martin, K. Kurtusic, and T. Tröster, “Influence of the Surrounding Sheet Geometry on a Clinched Joint,” Key Engineering Materials, vol. 927, 2022, doi:   https://doi.org/10.4028/p-09md1c.
LibreCat | DOI | Download (ext.)
 
[192]
2022 | Journal Article | LibreCat-ID: 32869
T. Stallmeister and T. Tröster, “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding,” Key Engineering Materials, vol. 926, pp. 1457–1467, 2022, doi: 10.4028/p-5fxp53.
LibreCat | DOI
 
[191]
2022 | Conference Abstract | LibreCat-ID: 32871
M. Triebus, M. Ostermann, T. Tröster, and I. Horwath, “Advanced Automotive Components by Fiber-Metal-Laminates,” presented at the Materials in Car Body Engineering 2022, Bad Nauheim, 2022.
LibreCat
 
[190]
2022 | Conference Abstract | LibreCat-ID: 32875
M. Ostermann et al., “Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen nachhaltiger Mobilität,” presented at the 14. Wissenschaftsforum Mobilität, Duisburg, 2022.
LibreCat
 
[189]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat | Download (ext.)
 
[188]
2021 | Book | LibreCat-ID: 28461
T. Tröster, F. Pfeifer, B. Nacke, and A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, vol. P1038. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
 
[187]
2021 | Book (Editor) | LibreCat-ID: 26996
R. Koch, I. Gräßler, D. Zimmer, and T. Tröster, Eds., Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix, vol. 25. Düren: Shaker Verlag, 2021.
LibreCat
 
[186]
2021 | Conference Abstract | LibreCat-ID: 21442
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Development of a submodel technique for FFT-based solvers in micromechanical analysis,” presented at the 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online), 2021.
LibreCat
 
[185]
2021 | Conference Paper | LibreCat-ID: 20857
A. A. Camberg, T. Tröster, and C. Latuske, “Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing,” presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg, 2021.
LibreCat | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 20858
A. A. Camberg, T. Tröster, N. Wingenbach, C. Hielscher, and J. Grenz, “A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design,” presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg, 2021.
LibreCat | DOI
 
[183]
2021 | Journal Article | LibreCat-ID: 22518 | OA
M. Triebus, J. Gierse, T. Marten, and T. Tröster, “A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions,” IOP Conference Series: Materials Science and Engineering, Art. no. 012052, 2021, doi: 10.1088/1757-899x/1157/1/012052.
LibreCat | DOI | Download (ext.)
 
[182]
2021 | Journal Article | LibreCat-ID: 22859
R. Grothe, J. A. Striewe, D. Meinderink, T. Tröster, and G. Grundmeier, “Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films,” The Journal of Adhesion, 2021.
LibreCat | DOI
 
[181]
2021 | Report | LibreCat-ID: 29807
C. Linnig and T. Tröster, Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Osnabrück: Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat
 
[180]
2021 | Journal Article | LibreCat-ID: 24131
T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components,” Metals, Art. no. 335, 2021, doi: 10.3390/met11020335.
LibreCat | DOI
 
[179]
2021 | Journal Article | LibreCat-ID: 21064
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis,” Metals, Art. no. 156, 2021, doi: 10.3390/met11010156.
LibreCat | DOI
 
[178]
2021 | Journal Article | LibreCat-ID: 24130
A. Magnier, T. Wu, S. R. Tinkloh, T. Tröster, B. Scholtes, and T. Niendorf, “On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites,” Polymer Testing, Art. no. 107146, 2021, doi: 10.1016/j.polymertesting.2021.107146.
LibreCat | DOI
 
[177]
2021 | Conference Abstract | LibreCat-ID: 21726 | OA
M. Triebus and T. Tröster, “HyOpt - Optimization-Based Development of Hybrid Materials,” presented at the 9th NRW Nano Conference - Innovations in Materials and Applications, Web, 2021.
LibreCat | Download (ext.)
 
[176]
2021 | Journal Article | LibreCat-ID: 33895
A. A. Camberg, T. Erhart, and T. Tröster, “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations,” Materials, vol. 14, no. 17, Art. no. 5106, 2021, doi: 10.3390/ma14175106.
LibreCat | DOI
 
[175]
2021 | Book Chapter | LibreCat-ID: 29086
W.-G. Drossel et al., “Hybridprofile für Trag- und Crashstrukturen,” in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
LibreCat | DOI
 
[174]
2021 | Journal Article | LibreCat-ID: 23431
C. Cheng et al., “Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure,” Composites Part B: Engineering, vol. 224, Art. no. 109209, 2021, doi: 10.1016/j.compositesb.2021.109209.
LibreCat | DOI
 
[173]
2021 | Journal Article | LibreCat-ID: 41508
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, vol. 831, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[172]
2021 | Conference Paper | LibreCat-ID: 26994
T. Stallmeister, S. Martin, T. Marten, and T. Tröster, “Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases,” presented at the Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim, 2021.
LibreCat
 
[171]
2021 | Journal Article | LibreCat-ID: 24009
A. A. Camberg, T. Erhart, and T. Tröster, “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations,” Materials, Art. no. 5106, 2021, doi: 10.3390/ma14175106.
LibreCat | DOI
 
[170]
2021 | Journal Article | LibreCat-ID: 23898
A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,” Journal of Materials Processing Technology, Art. no. 117183, 2021, doi: 10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[169]
2021 | Journal Article | LibreCat-ID: 27700
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[168]
2021 | Journal Article | LibreCat-ID: 29293 | OA
S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,” Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi: 10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[167]
2020 | Conference Paper | LibreCat-ID: 20843
T. Wu, S. R. Tinkloh, T. Tröster, and W. Zinn, “Residual stress measurement in GFRP/steel hybrid components,” in Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany, 2020.
LibreCat
 
[166]
2020 | Conference Paper | LibreCat-ID: 20854 | OA
A. A. Camberg and T. Tröster, “A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter.” 2020.
LibreCat | DOI | Download (ext.)
 
[165]
2020 | Conference Paper | LibreCat-ID: 20856 | OA
A. A. Camberg, T. Erhart, and T. Tröster, “Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework,” presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea, 2020.
LibreCat | DOI | Download (ext.)
 
[164]
2020 | Conference Abstract | LibreCat-ID: 21712
S. Schweizer, E. F. Akbulut Irmak, and T. Tröster, “Wood-based materials as a sustainable alternative for future car body construction,” presented at the Future Materials, vitual, 2020.
LibreCat
 
[163]
2020 | Conference Paper | LibreCat-ID: 16939 | OA
M. Triebus and T. Tröster, “A Holistic Approach to Optimization-Based Design of Hybrid Materials,” in Proceedings 4th International Conference Hybrid Materials & Structures, Web-Conference, 2020.
LibreCat | Download (ext.)
 
[162]
2020 | Conference Paper | LibreCat-ID: 15490 | OA
L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, and B. Henning, “Reduction of systematic measurement deviation in acoustic absorption measurement systems,” in Fortschritte der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat | Files available
 
[161]
2020 | Conference Paper | LibreCat-ID: 16930
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids,” presented at the 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany, 2020.
LibreCat
 
[160]
2020 | Journal Article | LibreCat-ID: 20842
T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method,” Journal of Composites Science, Art. no. 143, 2020, doi: 10.3390/jcs4030143.
LibreCat | DOI
 
[159]
2020 | Journal Article | LibreCat-ID: 15945
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures,” Composite Structures, vol. 238, Art. no. 111926, 2020, doi: 10.1016/j.compstruct.2020.111926.
LibreCat | DOI
 
[158]
2020 | Conference Paper | LibreCat-ID: 27417
D. Chalicheemalapalli Jayasankar, T. Stallmeister, Z. Wang, and T. Tröster, “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED,” in Hybrid 2020 Materials and Structures, Digital, 2020, pp. 167–172.
LibreCat | Files available
 
[157]
2019 | Report | LibreCat-ID: 21210
D. Ahlers and T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn, 2019.
LibreCat | DOI
 
[156]
2019 | Conference Paper | LibreCat-ID: 16793
F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, and B. Nacke, “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process,” in Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Luleå, 2019, pp. 585–593.
LibreCat
 
[155]
2019 | Conference Paper | LibreCat-ID: 16794
J. A. Striewe, R. Thomas, F. Fischer, T. Wiens, and T. Tröster, “Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung,” presented at the Tagung Werkstoffprüfung 2019, Neu-Ulm, 2019.
LibreCat
 
[154]
2019 | Misc | LibreCat-ID: 16825
D. Ahlers and T. Tröster, Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM, 2019.
LibreCat
 
[153]
2019 | Conference Paper | LibreCat-ID: 16827
A. A. Camberg and T. Tröster, “Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks,” in 26. Sächsische Fachtagung Umformtechnik, Dresden, 2019.
LibreCat
 
[152]
2019 | Conference Paper | LibreCat-ID: 16831
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures,” presented at the 22nd International Conference on Composite Structures (ICCS22) and 1st Chinese Conference on Composite Structures (CCCS1), Wuhan, 2019.
LibreCat
 
[151]
2019 | Journal Article | LibreCat-ID: 15875
A. A. Camberg, T. Tröster, F. Bohner, and J. Tölle, “Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications,” IOP Conference Series: Materials Science and Engineering, vol. 651, p. 012057, 2019.
LibreCat | DOI
 
[150]
2019 | Journal Article | LibreCat-ID: 15950
E. F. Akbulut Irmak and T. Tröster, “Fracture prediction of additively manufactured AlSi10Mg materials,” Procedia Structural Integrity, pp. 190–197, 2019.
LibreCat | DOI
 
[149]
2019 | Conference Paper | LibreCat-ID: 15976
E. F. Akbulut Irmak, J. Hanses, S. Schweizer, and T. Tröster, “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” presented at the 12th European LS-DYNA Conference, Koblenz, 2019.
LibreCat
 
[148]
2019 | Report | LibreCat-ID: 16029
T. Marten and T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat
 
[147]
2019 | Conference Paper | LibreCat-ID: 16030
M. Triebus, S. Bienia, T. Marten, T. Tröster, and K. Dröder, “Press Hardening Integrated Structuring for Hybrid Components,” presented at the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden, 2019.
LibreCat
 
[146]
2019 | Book Chapter | LibreCat-ID: 13436
A. A. Camberg, I. Stratmann, and T. Tröster, “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES,” in Technologies for economical and functional lightweight design, Berlin, Heidelberg, 2019.
LibreCat | DOI
 
[145]
2019 | Conference Paper | LibreCat-ID: 16032
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, and T. Tröster, “Self-sealing tool concept for RTM-processes,” presented at the 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne , 2019.
LibreCat
 
[144]
2019 | Conference Paper | LibreCat-ID: 16033
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, and T. Tröster, “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” presented at the Tagung Werkstoffprüfung 2019, Neu-Ulm, 2019.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 16027
A. A. Camberg, M. Striewe, T. Tröster, F. Bohner, and J. Tölle, “Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions,” presented at the 5th MATFEM Conference, Schloss Hohenkammer, 2019.
LibreCat
 
[142]
2019 | Book | LibreCat-ID: 16795
J. A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, and G. Grundmeier, Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat
 
[141]
2019 | Conference Paper | LibreCat-ID: 16028
R. Grothe, J. A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, and G. Meschut, “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” presented at the 39. EFB-Kolloquium, Bad Boll , 2019.
LibreCat
 
[140]
2018 | Conference Abstract | LibreCat-ID: 19868
A. A. Camberg, T. Tröster, N. Sotirov, J. Tölle, and F. Bohner, “Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions,” in Materials Science and Engineering (MSE) Congress 2018, Darmstadt, 2018.
LibreCat
 
[139]
2018 | Misc | LibreCat-ID: 6594
L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
 
[138]
2018 | Conference Paper | LibreCat-ID: 15960
N. Weiß-Borkowski et al., “Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models,” 2018.
LibreCat | DOI
 
[137]
2018 | Conference Paper | LibreCat-ID: 16034
A. A. Camberg and T. Tröster, “Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures,” in HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, Bremen, 2018.
LibreCat
 
[136]
2018 | Conference Paper | LibreCat-ID: 16039
D. Ahlers and T. Tröster, “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt, 2018.
LibreCat
 
[135]
2018 | Conference Paper | LibreCat-ID: 16040
Z. Wang and T. Tröster, “Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding,” presented at the 21th International Conference on Composite Structures (ICCS21), Bologna, Italy, 2018.
LibreCat
 
[134]
2018 | Conference Paper | LibreCat-ID: 16042 | OA
M. Triebus, T. Tröster, A. A. Camberg, S. Bienia, and K. Dröder, “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures,” in 15. Deutsches LS-Dyna Forum, Bamberg, 2018.
LibreCat | Download (ext.)
 
[133]
2018 | Conference Paper | LibreCat-ID: 16043 | OA
A. A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , and J. Tölle, “The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming,” in 15. Deutsches LS-Dyna Forum, Bamberg, 2018.
LibreCat | Download (ext.)
 
[132]
2018 | Conference Abstract | LibreCat-ID: 16056
S. Schweizer and T. Tröster, “Holz als Werkstoff im Automobil,” presented at the 2. Siegener Leichtbaukolloquium, Siegen, 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 16057
Z. Wang and T. Tröster, “Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess,” presented at the 2. Siegener Leichtbaukolloquium, Siegen, 2018.
LibreCat
 
[130]
2018 | Journal Article | LibreCat-ID: 13439
A. A. Camberg, F. Bohner, J. Tölle, A. Schneidt, S. Meiners, and T. Tröster, “Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models,” IOP Conference Series: Materials Science and Engineering, 2018.
LibreCat | DOI
 
[129]
2018 | Conference Paper | LibreCat-ID: 16052
I. Horwath, S. Dohmeier-Fischer, N. Weiß-Borkowski, and T. Tröster, “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING,” presented at the 12th International Technology, Education and Development Conference, Valencia, 2018, doi: 10.21125/inted.2018.1651.
LibreCat | DOI
 
[128]
2018 | Journal Article | LibreCat-ID: 15957
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[127]
2018 | Conference Paper | LibreCat-ID: 16048
D. Ahlers et al., “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing,” 2018, doi: 10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[126]
2018 | Conference Paper | LibreCat-ID: 16054
N. Weiß-Borkowski, I. Horwath, A. Berscheid, S. Dohmeier-Fischer, and T. Tröster, “NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH,” 2018, doi: 10.21125/inted.2018.1298.
LibreCat | DOI
 
[125]
2018 | Conference Paper | LibreCat-ID: 16035
J. A. Striewe, R. Grothe, J. Kowatz, T. Tröster, G. Grundmeier, and G. Meschut, “Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness,” presented at the 18th European Conference on Composite Materials, Athen, 2018.
LibreCat
 
[124]
2018 | Conference Paper | LibreCat-ID: 16050
A. A. Camberg et al., “LHYBS – Lightweight Design by Novel Hybrid Materials,” presented at the 8th NRW Nano Conference, Innovations in Materials and Applications, Dortmund, 2018.
LibreCat
 
[123]
2018 | Conference Paper | LibreCat-ID: 16055
C. Zinn, Z. Wang, T. Tröster, and M. Schaper, “Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM,” presented at the 3rd Int Conf on Hybrid Materials and Structures, Bremen, 2018.
LibreCat
 
[122]
2018 | Journal Article | LibreCat-ID: 24104
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[121]
2018 | Journal Article | LibreCat-ID: 41525
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, vol. 3, no. 4, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[120]
2018 | Journal Article | LibreCat-ID: 15958
C. Zinn et al., “Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids,” Composites Part B: Engineering, pp. 173–185, 2018, doi: 10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[119]
2017 | Conference Paper | LibreCat-ID: 6559
L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, “Additively manufactured acoustic diffuser structures for ultrasonic measurement applications,” in Proceedings of Meetings on Acoustics, 2017, p. 030004.
LibreCat | DOI
 
[118]
2017 | Conference Paper | LibreCat-ID: 16791
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating,” presented at the 5th International Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam, 2017.
LibreCat
 
[117]
2017 | Conference Paper | LibreCat-ID: 16792
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Effects of Holes in Blanks for Press Hardening Process due to Induction Heating,” presented at the XVIII International UIE-Congress Electrotechnologies for Material Processing, Hannover, 2017.
LibreCat
 
[116]
2017 | Journal Article | LibreCat-ID: 15941
C. Reuter, K.-H. Sauerland, and T. Tröster, “Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading,” Composite Structures, pp. 33–44, 2017.
LibreCat | DOI
 
[115]
2017 | Journal Article | LibreCat-ID: 15942
C. Reuter and T. Tröster, “Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact,” Thin-Walled Structures, vol. 117, pp. 1–9, 2017.
LibreCat | DOI
 
[114]
2017 | Journal Article | LibreCat-ID: 15944
J. A. Striewe, C. Reuter, K.-H. Sauerland, and T. Tröster, “Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites,” Thin-Walled Structures, pp. 501–508, 2017.
LibreCat | DOI
 
[113]
2017 | Conference Paper | LibreCat-ID: 16059
N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, and W. Bleck, “Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model,” in Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.
LibreCat | DOI
 
[112]
2017 | Journal Article | LibreCat-ID: 16062
S. Schweizer, A. Becker-Staines, and T. Tröster, “Separation of Hybrid Structures for the Reclaim of their Single Components,” Key Engineering Materials, pp. 568–575, 2017.
LibreCat | DOI
 
[111]
2017 | Conference Paper | LibreCat-ID: 16063
D. Ahlers and T. Tröster, “Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 
[110]
2017 | Conference Paper | LibreCat-ID: 16065
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, and T. Tröster, “Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,” presented at the 2nd Conference & Exhibition on Light Materials, Bremen, 2017.
LibreCat
 
[109]
2017 | Conference Paper | LibreCat-ID: 16071
Z. Wang, P. Kutz, and T. Tröster, “Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,” presented at the 15. Bielefelder Werkstofftag, Bielefeld, 2017.
LibreCat
 
[108]
2017 | Conference Paper | LibreCat-ID: 16072
N. Weiß Borkowski, A. A. Camberg, T. Tröster, and T. Marten, “Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH,” presented at the 4th MATFEM Conference, Schloss Hohenkammer, 2017.
LibreCat
 
[107]
2017 | Conference Paper | LibreCat-ID: 16073
N. Weiß Borkowski, T. Marten, T. Tröster, and A. Schulz Beenken, “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates,” presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA, 2017.
LibreCat
 
[106]
2017 | Conference Paper | LibreCat-ID: 16074
D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,” presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
LibreCat
 
[105]
2017 | Conference Paper | LibreCat-ID: 16075
D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen, 2017.
LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16066
D. Ahlers et al., “Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 
[103]
2017 | Journal Article | LibreCat-ID: 24108
F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[102]
2017 | Journal Article | LibreCat-ID: 41530
F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, vol. 133, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[101]
2017 | Journal Article | LibreCat-ID: 15961
K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2017, doi: 10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[100]
2016 | Journal Article | LibreCat-ID: 15962
T. Tröster, A. A. Camberg, B. Sanitther, Z. Wang, and C. Lauter, “Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology,” International Journal of Automotive Composites, vol. 2, pp. 229–243, 2016.
LibreCat | DOI
 
[99]
2016 | Journal Article | LibreCat-ID: 16139
S. Schweizer and T. Tröster, “Recyclingkonzepte für hybride Strukturen,” Carbon Composites Magazin, no. 2, p. 23, 2016.
LibreCat
 
[98]
2016 | Journal Article | LibreCat-ID: 16146
V. Grienitz, T. Tröster, and S. Meiners, “Technikevaluation für die generative Fertigung eines Serien-Radträgers,” ATZ - Automobiltechnische Zeitschrift, pp. 36–41, 2016.
LibreCat | DOI
 
[97]
2016 | Conference Paper | LibreCat-ID: 16264
Z. Wang and T. Tröster, “Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren,” presented at the EuroHybrid, Kaiserslautern, 2016.
LibreCat
 
[96]
2016 | Conference Paper | LibreCat-ID: 16266
J. A. Striewe, C. Reuter, C. Oberkönig, C. Lauter, and T. Tröster, “Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe,” presented at the Polymertec16, Merseburg, 2016.
LibreCat
 
[95]
2016 | Conference Paper | LibreCat-ID: 16267
J. A. Striewe, C. Lauter, C. Reuter, and T. Tröster, “Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites,” presented at the 19th International Conference on Composite Structures, Porto, 2016.
LibreCat
 
[94]
2016 | Conference Paper | LibreCat-ID: 16268
J. A. Striewe, C. Reuter, C. Lauter, and T. Tröster, “Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures,” presented at the 19th International Conference on Composite Structures, Porto, 2016.
LibreCat
 
[93]
2016 | Conference Paper | LibreCat-ID: 16269
Z. Wang, C. Lauter, J. Löseke, and T. Tröster, “CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications,” presented at the International Conference on Automotive Composites, ICAutoC 2016, Lisbon, Portugal, 2016.
LibreCat
 
[92]
2016 | Journal Article | LibreCat-ID: 16270
T. Hickmann, D. Ahlers, and T. Tröster, “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten,” Der Stahlformenbauer , no. 5, 2016.
LibreCat
 
[91]
2016 | Journal Article | LibreCat-ID: 15963
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, vol. 2, pp. 272–298, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[90]
2016 | Conference Paper | LibreCat-ID: 16138
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” presented at the Faszination hybrider Leichtbau 2016, Wolfsburg, 2016.
LibreCat
 
[89]
2016 | Conference Paper | LibreCat-ID: 16265
C. Zinn et al., “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” presented at the EuroHybrid, Kaiserslautern, 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16140
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, and G. Meschut, “Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications,” Journal of Materials Science Research, Art. no. 15, 2016, doi: 10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[87]
2016 | Journal Article | LibreCat-ID: 16143
K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2016, doi: 10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 16141
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, Art. no. 272, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[85]
2016 | Journal Article | LibreCat-ID: 16137
C. Lauter, C. Reuter, S. Wu, and T. Tröster, “Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology,” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 10, no. 5, pp. 875–880, 2016, doi: doi.org/10.5281/zenodo.1124481.
LibreCat | DOI
 
[84]
2015 | Journal Article | LibreCat-ID: 15964
S. Leuders, M. Vollmer, F. Brenne, T. Tröster, and T. Niendorf, “Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting,” Metallurgical and Materials Transactions A, pp. 3816–3823, 2015.
LibreCat | DOI
 
[83]
2015 | Conference Paper | LibreCat-ID: 16131
T. Marten, H. Block, and T. Tröster, “Partial hardening of new press hardenable steels,” presented at the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2015, Toronto, Canada, 2015.
LibreCat
 
[82]
2015 | Conference Paper | LibreCat-ID: 16132
N. Weiß Borkowski, T. Marten, H. Block, and T. Tröster, “Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests,” presented at the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2015, Toronto, Canada, 2015.
LibreCat
 
[81]
2015 | Conference Paper | LibreCat-ID: 16135
M. Frantz, C. Lauter, Z. Wang, and T. Tröster, “Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK),” presented at the Tagung Werkstoffprüfung 2015, Bad Neuenahr, 2015, pp. 139–144.
LibreCat
 
[80]
2015 | Conference Paper | LibreCat-ID: 16136
C. Reuter, T. Tröster, and C. Lauter, “Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna,” presented at the Tagung Werkstoffprüfung 2015, Tagung Werkstoffprüfung 2015, Bad Neuenahr, 2015, pp. 127–132.
LibreCat
 
[79]
2015 | Conference Paper | LibreCat-ID: 16258
W. Reschetnik, S. Leuders, A. Riemer, T. Tröster, H. A. Richard, and T. Niendorf, “Fatigue life prediction for metals processed by Selective Laser Melting using finite element analyses,” presented at the TMS Annual Meeting & Exhibition, Orlando, Florida, USA, 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16259
Z. Wang, C. Lauter, B. Sanitther, M. Frantz, and T. Tröster, “Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding,” presented at the 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal, 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16260
C. Lauter, Z. Wang, T. Tröster, R. Brandis, and D. Köchling, “Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design,” presented at the 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal, 2015.
LibreCat
 
[76]
2015 | Conference Paper | LibreCat-ID: 16261
S. Leuders, S. Meiners, A. Taube, T. Tröster, and T. Niendorf, “Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting,” presented at the 13th World Conference on Titanium, San Diego, USA, 2015.
LibreCat
 
[75]
2015 | Conference Paper | LibreCat-ID: 16263
N. Wingenbach and T. Tröster, “Material follows form follows function,” presented at the Hybrid-Expo, Stuttgart, 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16133
C. Lauter, Z. Wang, I. Koke, and T. Tröster, “Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology,” presented at the 20th International Conference on Composite Materials, ICCM20, Copenhagen, Denmark, 2015.
LibreCat
 
[73]
2015 | Book Chapter | LibreCat-ID: 16134
P. Abel, C. Lauter, T. Gries, and T. Tröster, “Textile composites in the automotive industry,” in Fatigue of Textile Composites, 2015.
LibreCat | DOI
 
[72]
2015 | Conference Paper | LibreCat-ID: 16262
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” presented at the Hybrid-Expo, Stuttgart, 2015.
LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 23061
C. Lauter, Z. Wang, I. Koke, and T. Tröster, “Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology,” 2015.
LibreCat
 
[70]
2014 | Journal Article | LibreCat-ID: 15966
T. Niendorf et al., “Functionally Graded Alloys Obtained by Additive Manufacturing,” Advanced Engineering Materials, pp. 857–861, 2014.
LibreCat | DOI
 
[69]
2014 | Journal Article | LibreCat-ID: 15967
A. Riemer, S. Leuders, M. Thöne, H. A. Richard, T. Tröster, and T. Niendorf, “On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting,” Engineering Fracture Mechanics, pp. 15–25, 2014.
LibreCat | DOI
 
[68]
2014 | Conference Paper | LibreCat-ID: 16097
M. Klein et al., “Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids,” presented at the International Conference: Euro Hybrid Materials and Structures, Stade, 2014, pp. 188–193.
LibreCat
 
[67]
2014 | Conference Paper | LibreCat-ID: 16099
M. Frantz et al., “Efficient manufacturing of hybrid structures consisting of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung,” presented at the New Developments in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung), Stuttgart, 2014.
LibreCat
 
[66]
2014 | Conference Paper | LibreCat-ID: 16120
H. Block, T. Marten, and T. Tröster, “Crash simulation of high strength automotive components using advanced failure models,” presented at the 4th international conference on steels in cars and trucks, Braunschweig, 2014.
LibreCat
 
[65]
2014 | Journal Article | LibreCat-ID: 16122
C. Lauter, J. Niewel, and T. Tröster, “Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications,” International Journal of Automotive Composites, 2014.
LibreCat | DOI
 
[64]
2014 | Conference Paper | LibreCat-ID: 16128
H. Block, T. Marten, N. Weiß Borkowski, and T. Tröster, “Crash performance of the new press hardenable steel 15MnB6,” presented at the 3rd MATFEM conference, Hohenkammer, 2014.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16129
C. Reuter, D. Flore, S. Pöhler, K. H. Sauerland, and T. Tröster, “Numerical simulation of the energy absorption of fiber-reinforced plastics,” presented at the Tagungsband NAFEMS Seminar: Simulation of Composites – A Closed Process Chain, Leipzig, 2014.
LibreCat
 
[62]
2014 | Conference Paper | LibreCat-ID: 16130
N. Weiß Borkowski, T. Marten, and T. Tröster, “Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch,” presented at the Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband Werkstoffprüfung 2014, Berlin, 2014.
LibreCat
 
[61]
2014 | Conference Paper | LibreCat-ID: 16255
S. Leuders, A. Riemer, H. A. Richard, T. Tröster, and T. Niendorf, “Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent defects on the initiation and propagation of fatigue cracks,” presented at the 25th Colloquium on Fatigue Mechanisms, Erlangen, Germany, 2014.
LibreCat
 
[60]
2014 | Conference Paper | LibreCat-ID: 16256
S. Leuders, T. Tröster, F. Brenne, A. Riemer, H. A. Richard, and T. Niendorf, “Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting,” presented at the American Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, San Francisco, California, USA, 2014.
LibreCat
 
[59]
2014 | Conference Paper | LibreCat-ID: 16257
S. Leuders, T. Tröster, A. Riemer, H. A. Richard, and T. Niendorf, “On the mechanical performance of structures manufactured by selective laser melting: Damage initiation and propagation,” presented at the Additive Manufacturing with Powder Metallurgy Conference, Orlando, Florida, USA, 2014.
LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16098
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” Stade, 2014, pp. 101–108.
LibreCat
 
[57]
2014 | Journal Article | LibreCat-ID: 16125
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics , vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
 
[56]
2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat | DOI
 
[55]
2013 | Journal Article | LibreCat-ID: 15968
T. Niendorf, S. Leuders, A. Riemer, H. A. Richard, T. Tröster, and D. Schwarze, “Highly Anisotropic Steel Processed by Selective Laser Melting,” Metallurgical and Materials Transactions B, pp. 794–796, 2013.
LibreCat | DOI
 
[54]
2013 | Journal Article | LibreCat-ID: 16016
A. Riemer, S. Leuders, H. A. Richard, and T. Tröster, “Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗,” Materials Testing, pp. 537–543, 2013.
LibreCat | DOI
 
[53]
2013 | Conference Paper | LibreCat-ID: 16017
T. Marten, H. Block, T. Tröster, T. Gerber, S. Sikora, and F.-J. Lenze, “Graded Lightweight Structures Through Hot Forming,” presented at the 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2013), Lulea, 2013.
LibreCat
 
[52]
2013 | Conference Paper | LibreCat-ID: 16018
C. Lauter, T. Hochschulz, M. Frantz, and T. Tröster, “Influences of Automotive Process Characteristics on Hybrid Structures,” presented at the 17th International Conference on Composite Structures (ICCS17), Porto , 2013.
LibreCat
 
[51]
2013 | Conference Paper | LibreCat-ID: 16019
B. Siewers, C. Lauter, and T. Tröster, “Curing of fibre reinforced plastics by resistance heating of sheet metal in a hybrid structure,” presented at the 17th International Conference on Composite Structures (ICCS17), Porto, 2013.
LibreCat
 
[50]
2013 | Conference Paper | LibreCat-ID: 16020
T. Tröster, C. Lauter, and C. Reuter, “Crashworthiness of Hybrid Structures,” presented at the 4th International Conference on Integrity, Reliability and Failure (IRF2013), Funchal, Portugal, 2013.
LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16021
B. Siewers, C. Lauter, and T. Tröster, “Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures,” presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada, 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16022
C. Lauter, T. Krooß, and T. Tröster, “Manufacturing of Hybrid Structures by Prepreg Press Technology,” presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada, 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16023
T. Tröster, C. Lauter, and C. Reuter, “Leichtbau mit Hybridstrukturen im Automobil,” presented at the Siegener Kolloquium “Leichtbau in Karosserie- und Fahrwerksstrukturen,” Siegen, 2013.
LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16024
S. Leuders, A. Riemer, T. Niendorf, H. A. Richard, and T. Tröster, “On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects,” presented at the Materials Science & Technology, Montreal, Canada, 2013.
LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16025
T. Marten, H. Block, and T. Tröster, “Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess,” presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2013.
LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16026
A. Riemer, S. Leuders, H. A. Richard, and T. Tröster, “Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen,” presented at the Herbstsitzung 2013 des DGM/DVM Arbeitskreises Materialermüdung, Dortmund, 2013.
LibreCat
 
[43]
2013 | Book Chapter | LibreCat-ID: 16096
C. Lauter, T. Tröster, and C. Reuter, “Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications,” in Advanced Composite Materials for Automotive Applications, Chichester, UK, 2013.
LibreCat | DOI
 
[42]
2012 | Journal Article | LibreCat-ID: 15981
T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, and M. Thöne, “Automobilleichtbau mit innovativen Werkstoffen und Prozessen,” Forschungsforum Paderborn, vol. 15, no. 15/2012, pp. 30–38, 2012.
LibreCat
 
[41]
2012 | Journal Article | LibreCat-ID: 15983
C. Lauter, S. Werneke, B. Siewers, and T. Tröster, “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen,” Lightweight Design, pp. 53–58, 2012.
LibreCat | DOI
 
[40]
2012 | Conference Paper | LibreCat-ID: 15985
C. Reuter, M. Frantz, C. Lauter, H. Block, and T. Tröster, “Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP,” presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy, 2012.
LibreCat
 
[39]
2012 | Conference Paper | LibreCat-ID: 15987
C. Lauter, M. Frantz, J. P. Kohler, and T. Tröster, “Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements,” presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy, 2012.
LibreCat
 
[38]
2012 | Conference Paper | LibreCat-ID: 15988
C. Lauter, M. Sarrazin, and T. Tröster, “Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics,” presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal, 2012.
LibreCat
 
[37]
2012 | Journal Article | LibreCat-ID: 15989
L. Ickert, D. Thomas, T. Tröster, and L. Eckstein, “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise,” FAT-Schriftenreihe 244, no. 244, 2012.
LibreCat
 
[36]
2012 | Conference Paper | LibreCat-ID: 16004
C. Lauter, B. Siewers, B. Zanft, and T. Tröster, “Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements,” presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto , 2012.
LibreCat
 
[35]
2012 | Conference Paper | LibreCat-ID: 16007
M. Thöne, S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V,” presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA, 2012.
LibreCat
 
[34]
2012 | Journal Article | LibreCat-ID: 16008
A. Riemer, S. Leuders, T. Tröster, and H. A. Richard, “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4,” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, 2012.
LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16009
S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement,” presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel, 2012.
LibreCat
 
[32]
2012 | Report | LibreCat-ID: 16012
T. Tröster, T. Marten, S. Adelbert, and A. Kadim, P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16015
S. Leuders et al., “On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance,” International Journal of Fatigue, pp. 300–307, 2012.
LibreCat | DOI
 
[30]
2012 | Journal Article | LibreCat-ID: 15984
H. C. Schmidt et al., “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” Key Engineering Materials, pp. 295–300, 2012, doi: 10.4028/www.scientific.net/kem.504-506.295.
LibreCat | DOI
 
[29]
2012 | Conference Paper | LibreCat-ID: 15986
B. Gorny et al., “Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs,” presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy, 2012.
LibreCat
 
[28]
2012 | Journal Article | LibreCat-ID: 16010
C. Lauter, T. Tröster, R. Brandis, and J. Gausemeier, “Methodik für die Produktentstehung hybrider Leichtbaustrukturen,” Lightweight Design, vol. 5, pp. 50–56, 2012, doi: 10.1365/s35725-013-0137-4.
LibreCat | DOI
 
[27]
2011 | Journal Article | LibreCat-ID: 15969
C. Lauter, M. Sarrazin, and T. Tröster, “Multimaterialsysteme höchstfest verbunden,” Adhäsion – Kleben und Dichten, vol. 3/2011, pp. 39–43, 2011.
LibreCat
 
[26]
2011 | Conference Paper | LibreCat-ID: 15971
M. Frantz, O. Stübbe, C. Lauter, J. Schrange, and T. Tröster, “Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder,” presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011.
LibreCat
 
[25]
2011 | Conference Paper | LibreCat-ID: 15972
D. Thomas, H. Block, T. Tröster, and J. Krogmeier, “Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,” presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011.
LibreCat
 
[24]
2011 | Journal Article | LibreCat-ID: 15974
T. Marten, C. Lauter, and T. Tröster, “Automobilleichtbau durch höchstfeste Multimaterialsysteme,” Ingenieurspiegel, vol. 2/2011, pp. 67–69, 2011.
LibreCat
 
[23]
2011 | Journal Article | LibreCat-ID: 15975
C. Lauter, D. Thomas, M. Frantz, J. Niewel, and T. Tröster, “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen,” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, vol. 2, pp. 6–7, 2011.
LibreCat
 
[22]
2011 | Journal Article | LibreCat-ID: 15980
C. Lauter, M. Frantz, B. Siewers, and T. Tröster, “Hybrid structures for tailored structural automotive components,” JEC Composites Magazine, vol. 69, pp. 35–37, 2011.
LibreCat
 
[21]
2011 | Conference Paper | LibreCat-ID: 15990
D. Thomas, H. Block, and T. Tröster, “Production of load-adapted lightweight designs by partial hardening,” presented at the 3rd International Conference on Steels in Cars and Trucks (SCT), Salzburg, 2011.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 15992
B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Tröster, and H. J. Maier, “In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting,” Materials Science and Engineering: A, vol. 528, no. 27, pp. 7962–7967, 2011.
LibreCat | DOI
 
[19]
2011 | Journal Article | LibreCat-ID: 15993
C. Lauter, M. Frantz, and T. Tröster, “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen,” Lightweight Design, vol. 4, pp. 48–54, 2011.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15996
M. Frantz, C. Lauter, and T. Tröster, “Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP,” presented at the 56th International Scientific Colloquium (56th IWK), Ilmenau, 2011.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

217 Publications

Mark all

[217]
2023 | Journal Article | LibreCat-ID: 43464 | OA
M. Ostermann et al., “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures,” Energies, vol. 16, no. 8, Art. no. 3371, 2023, doi: 10.3390/en16083371.
LibreCat | DOI | Download (ext.)
 
[216]
2023 | Conference Paper | LibreCat-ID: 44154
J. Lückenkötter, J. P. Leimbach, T. Stallmeister, T. Marten, and T. Tröster, “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector,” in Materials Research Proceedings, Krakow, Poland, 2023, vol. 28, pp. 249–258, doi: 10.21741/9781644902479-27.
LibreCat | DOI
 
[215]
2023 | Conference Paper | LibreCat-ID: 44502
M. Ostermann et al., “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility,” in Towards the New Normal in Mobility, Duisburg, 2023, doi: 10.1007/978-3-658-39438-7_25.
LibreCat | DOI
 
[214]
2023 | Journal Article | LibreCat-ID: 37200
S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, and T. Tröster, “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709,” Crystals, vol. 13, no. 2, Art. no. 157, 2023, doi: 10.3390/cryst13020157.
LibreCat | DOI
 
[213]
2023 | Journal Article | LibreCat-ID: 45782 | OA
J. Grenz et al., “Integrating Prospective LCA in the Development of Automotive Components,” Sustainability, vol. 15, no. 13, Art. no. 10041, 2023, doi: 10.3390/su151310041.
LibreCat | Files available | DOI | Download (ext.)
 
[212]
2023 | Journal Article | LibreCat-ID: 46486
F. Pfeifer, L. Knorr, F. Schlosser, T. Marten, and T. Tröster, “Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes,” Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 11, no. 3, pp. 1–20, 2023, doi: 10.13044/j.sdewes.d11.0450.
LibreCat | DOI
 
[211]
2023 | Conference Abstract | LibreCat-ID: 42459
M. Ostermann, J. Behm, T. Marten, and T. Tröster, “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen,” presented at the WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, Stuttgart, 2023.
LibreCat
 
[210]
2023 | Journal Article | LibreCat-ID: 46495
S. Wu et al., “Adhesion properties of the hybrid system made of laser-structured aluminium EN AW 6082 and CFRP by co-bonding-pressing process,” The Journal of Adhesion, pp. 1–29, 2023, doi: 10.1080/00218464.2023.2245758.
LibreCat | DOI
 
[209]
2023 | Journal Article | LibreCat-ID: 46494
J. Freund et al., “Relationship between laser-generated micro- and nanostructures and the long-term stability of bonded epoxy-aluminum joints,” The Journal of Adhesion, pp. 1–31, 2023, doi: 10.1080/00218464.2023.2223475.
LibreCat | DOI
 
[208]
2023 | Journal Article | LibreCat-ID: 47536
T. Borgert, D. Milaege, S. Schweizer, W. Homberg, M. Schaper, and T. Tröster, “Potentials of a friction-induced recycling process to improve resource and energy efficiency in manufacturing technology,” International Journal of Material Forming, vol. 16, no. 6, Art. no. 59, 2023, doi: 10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[207]
2023 | Conference Paper | LibreCat-ID: 48597
S. Wu et al., “Intrinsic forming of hybrid parts made of laser-structured aluminium sheet and CFRP-Prepreg,” presented at the 23rd International Conference on Composite Materials (ICCM23 2023), 2023.
LibreCat
 
[206]
2023 | Book Chapter | LibreCat-ID: 48643
E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III: Challenges of lightweight design, vehicles, and rescuers,” in Climate Protection, Resource Efficiency, and Sustainable Engineering, Bielefeld, Germany: transcript Verlag, 2023.
LibreCat | DOI
 
[205]
2023 | Conference Paper | LibreCat-ID: 48586
J. Lückenkötter, S. Aydin, T. Marten, and T. Tröster, “Analysis and Optimization of Joint Formation in Hybrid Compression Molding,” presented at the 23nd International Conference on Composite Materials (ICCM23 2023), Belfast, 2023.
LibreCat
 
[204]
2023 | Conference Paper | LibreCat-ID: 49436
M. A. Kaiser, A. Reitz, S. Konrad, T. Meyer, T. Marten, and T. Tröster, “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess,” in Workshop Warmblechumformung, Fürth, 2023, vol. 18, pp. 99–118.
LibreCat
 
[203]
2023 | Conference Paper | LibreCat-ID: 50742 | OA
C. Bödger, S. Gnaase, D. Lehnert, and T. Tröster, “Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718,” presented at the Solid Freeform Fabrication, Austin, 2023.
LibreCat | Files available | Download (ext.)
 
[202]
2023 | Conference Abstract | LibreCat-ID: 45831
D. Chalicheemalapalli Jayasankar, T. Stallmeister, J. Lückenkötter, and T. Tröster, “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” presented at the 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway , 2023.
LibreCat | Files available
 
[201]
2022 | Newspaper Article | LibreCat-ID: 33001
C. Linnig and T. Tröster, “Sauber recyceln- Innovative Verfahrenskombination mit Ultraschall ermöglicht sicheren Umgang mit recycelten Carbonfasern,” CU reports, 2022.
LibreCat
 
[200]
2022 | Conference Abstract | LibreCat-ID: 37258
S. Haller, S. R. Tinkloh, T. Tröster, and R. Brandt, “The environmental impact on the strain rate dependent energy absorption capability of a hybrid crash absorber element,” presented at the 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
 
[199]
2022 | Conference Paper | LibreCat-ID: 32819
F. Pfeifer, T. Tröster, T. Marten, A. Dietrich, B. Nacke, and G. Grundmeier, “Investigation on hot sheet metal forming by means of a longitudinal flux inductor,” presented at the 6th International Conference on Steels in Cars and Trucks, Mailand, 2022.
LibreCat
 
[198]
2022 | Journal Article | LibreCat-ID: 34097
D. Voswinkel et al., “Co-bonding of carbon fibre-reinforced epoxy and galvanised steel with laser structured interface for automotive applications,” Advanced Composite Materials, pp. 1–16, 2022, doi: 10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[197]
2022 | Journal Article | LibreCat-ID: 31496
T. Wu et al., “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects,” Journal of Composites Science, vol. 6, no. 5, Art. no. 138, 2022, doi: 10.3390/jcs6050138.
LibreCat | DOI
 
[196]
2022 | Journal Article | LibreCat-ID: 34069
B. Schramm et al., “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase,” Journal of Advanced Joining Processes, vol. 6, Art. no. 100133, 2022, doi: 10.1016/j.jajp.2022.100133.
LibreCat | DOI
 
[195]
2022 | Journal Article | LibreCat-ID: 32814
T. Wu et al., “Characterization of residual stresses in fiber metal laminate interfaces - A combined approach applying hole-drilling method and energy-dispersive X-ray diffraction,” Composite Structures, Art. no. 116071, 2022, doi: 10.1016/j.compstruct.2022.116071.
LibreCat | DOI
 
[194]
2022 | Journal Article | LibreCat-ID: 29951 | OA
S. Martin, C. R. Bielak, M. Bobbert, T. Tröster, and G. Meschut, “Numerical investigation of the clinched joint loadings considering the initial pre-strain in the joining area,” Production Engineering, 2022, doi: 10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[193]
2022 | Journal Article | LibreCat-ID: 32813 | OA
S. Martin, K. Kurtusic, and T. Tröster, “Influence of the Surrounding Sheet Geometry on a Clinched Joint,” Key Engineering Materials, vol. 927, 2022, doi:   https://doi.org/10.4028/p-09md1c.
LibreCat | DOI | Download (ext.)
 
[192]
2022 | Journal Article | LibreCat-ID: 32869
T. Stallmeister and T. Tröster, “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding,” Key Engineering Materials, vol. 926, pp. 1457–1467, 2022, doi: 10.4028/p-5fxp53.
LibreCat | DOI
 
[191]
2022 | Conference Abstract | LibreCat-ID: 32871
M. Triebus, M. Ostermann, T. Tröster, and I. Horwath, “Advanced Automotive Components by Fiber-Metal-Laminates,” presented at the Materials in Car Body Engineering 2022, Bad Nauheim, 2022.
LibreCat
 
[190]
2022 | Conference Abstract | LibreCat-ID: 32875
M. Ostermann et al., “Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen nachhaltiger Mobilität,” presented at the 14. Wissenschaftsforum Mobilität, Duisburg, 2022.
LibreCat
 
[189]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
M. Triebus et al., “Forming Simulation of Tailored Press Hardened Parts,” presented at the 13th European LS-DYNA Conference 2021, Ulm, 2021.
LibreCat | Download (ext.)
 
[188]
2021 | Book | LibreCat-ID: 28461
T. Tröster, F. Pfeifer, B. Nacke, and A. Dietrich, Großserientaugliche induktive Platinenerwärmung für den Warmformprozess, vol. P1038. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
 
[187]
2021 | Book (Editor) | LibreCat-ID: 26996
R. Koch, I. Gräßler, D. Zimmer, and T. Tröster, Eds., Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix, vol. 25. Düren: Shaker Verlag, 2021.
LibreCat
 
[186]
2021 | Conference Abstract | LibreCat-ID: 21442
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Development of a submodel technique for FFT-based solvers in micromechanical analysis,” presented at the 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online), 2021.
LibreCat
 
[185]
2021 | Conference Paper | LibreCat-ID: 20857
A. A. Camberg, T. Tröster, and C. Latuske, “Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing,” presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg, 2021.
LibreCat | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 20858
A. A. Camberg, T. Tröster, N. Wingenbach, C. Hielscher, and J. Grenz, “A new numerical method for potential anaylsis and design of hybrid components from full vehicle simulations: Implementation and component design,” presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg, 2021.
LibreCat | DOI
 
[183]
2021 | Journal Article | LibreCat-ID: 22518 | OA
M. Triebus, J. Gierse, T. Marten, and T. Tröster, “A new Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions,” IOP Conference Series: Materials Science and Engineering, Art. no. 012052, 2021, doi: 10.1088/1757-899x/1157/1/012052.
LibreCat | DOI | Download (ext.)
 
[182]
2021 | Journal Article | LibreCat-ID: 22859
R. Grothe, J. A. Striewe, D. Meinderink, T. Tröster, and G. Grundmeier, “Enhanced corrosion resistance of adhesive/galvanised steel interfaces by nanocrystalline ZnO thin film deposition and molecular adhesion promoting films,” The Journal of Adhesion, 2021.
LibreCat | DOI
 
[181]
2021 | Report | LibreCat-ID: 29807
C. Linnig and T. Tröster, Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Osnabrück: Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat
 
[180]
2021 | Journal Article | LibreCat-ID: 24131
T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components,” Metals, Art. no. 335, 2021, doi: 10.3390/met11020335.
LibreCat | DOI
 
[179]
2021 | Journal Article | LibreCat-ID: 21064
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis,” Metals, Art. no. 156, 2021, doi: 10.3390/met11010156.
LibreCat | DOI
 
[178]
2021 | Journal Article | LibreCat-ID: 24130
A. Magnier, T. Wu, S. R. Tinkloh, T. Tröster, B. Scholtes, and T. Niendorf, “On the reliability of residual stress measurements in unidirectional carbon fibre reinforced epoxy composites,” Polymer Testing, Art. no. 107146, 2021, doi: 10.1016/j.polymertesting.2021.107146.
LibreCat | DOI
 
[177]
2021 | Conference Abstract | LibreCat-ID: 21726 | OA
M. Triebus and T. Tröster, “HyOpt - Optimization-Based Development of Hybrid Materials,” presented at the 9th NRW Nano Conference - Innovations in Materials and Applications, Web, 2021.
LibreCat | Download (ext.)
 
[176]
2021 | Journal Article | LibreCat-ID: 33895
A. A. Camberg, T. Erhart, and T. Tröster, “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations,” Materials, vol. 14, no. 17, Art. no. 5106, 2021, doi: 10.3390/ma14175106.
LibreCat | DOI
 
[175]
2021 | Book Chapter | LibreCat-ID: 29086
W.-G. Drossel et al., “Hybridprofile für Trag- und Crashstrukturen,” in Intrinsische Hybridverbunde für Leichtbautragstrukturen, Berlin, Heidelberg, 2021.
LibreCat | DOI
 
[174]
2021 | Journal Article | LibreCat-ID: 23431
C. Cheng et al., “Non-linear mean-field modelling of UD composite laminates accounting for average asymmetric plasticity of the matrix, debonding and progressive failure,” Composites Part B: Engineering, vol. 224, Art. no. 109209, 2021, doi: 10.1016/j.compositesb.2021.109209.
LibreCat | DOI
 
[173]
2021 | Journal Article | LibreCat-ID: 41508
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, vol. 831, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[172]
2021 | Conference Paper | LibreCat-ID: 26994
T. Stallmeister, S. Martin, T. Marten, and T. Tröster, “Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases,” presented at the Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim, 2021.
LibreCat
 
[171]
2021 | Journal Article | LibreCat-ID: 24009
A. A. Camberg, T. Erhart, and T. Tröster, “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations,” Materials, Art. no. 5106, 2021, doi: 10.3390/ma14175106.
LibreCat | DOI
 
[170]
2021 | Journal Article | LibreCat-ID: 23898
A. Andreiev et al., “Soft-magnetic behavior of laser beam melted FeSi3 alloy with graded cross-section,” Journal of Materials Processing Technology, Art. no. 117183, 2021, doi: 10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[169]
2021 | Journal Article | LibreCat-ID: 27700
A. A. Camberg, A. Andreiev, S. Pramanik, K.-P. Hoyer, T. Tröster, and M. Schaper, “Strength enhancement of AlMg sheet metal parts by rapid heating and subsequent cold die stamping of severely cold-rolled blanks,” Materials Science and Engineering: A, Art. no. 142312, 2021, doi: 10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[168]
2021 | Journal Article | LibreCat-ID: 29293 | OA
S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,” Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi: 10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[167]
2020 | Conference Paper | LibreCat-ID: 20843
T. Wu, S. R. Tinkloh, T. Tröster, and W. Zinn, “Residual stress measurement in GFRP/steel hybrid components,” in Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany, 2020.
LibreCat
 
[166]
2020 | Conference Paper | LibreCat-ID: 20854 | OA
A. A. Camberg and T. Tröster, “A simplified method for the evaluation of the layer compression test using one 3D digital image correlation system and considering the material anisotropy by the equibiaxial Lankford parameter.” 2020.
LibreCat | DOI | Download (ext.)
 
[165]
2020 | Conference Paper | LibreCat-ID: 20856 | OA
A. A. Camberg, T. Erhart, and T. Tröster, “Predicting fracture at non-isothermal forming conditions: A temperature dependent extension of the LS-DYNA GISSMO fracture indicator framework,” presented at the International Deep-Drawing Research Group (IDDRG 2020) , Seoul, South Korea, 2020.
LibreCat | DOI | Download (ext.)
 
[164]
2020 | Conference Abstract | LibreCat-ID: 21712
S. Schweizer, E. F. Akbulut Irmak, and T. Tröster, “Wood-based materials as a sustainable alternative for future car body construction,” presented at the Future Materials, vitual, 2020.
LibreCat
 
[163]
2020 | Conference Paper | LibreCat-ID: 16939 | OA
M. Triebus and T. Tröster, “A Holistic Approach to Optimization-Based Design of Hybrid Materials,” in Proceedings 4th International Conference Hybrid Materials & Structures, Web-Conference, 2020.
LibreCat | Download (ext.)
 
[162]
2020 | Conference Paper | LibreCat-ID: 15490 | OA
L. Claes, E. Baumhögger, T. Rüther, J. Gierse, T. Tröster, and B. Henning, “Reduction of systematic measurement deviation in acoustic absorption measurement systems,” in Fortschritte der Akustik - DAGA 2020, 2020, pp. 1077–1080.
LibreCat | Files available
 
[161]
2020 | Conference Paper | LibreCat-ID: 16930
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Numerical investigation of the hole-drilling method applied to intrinsic manufactured metal-CFRP hybrids,” presented at the 4th International Conference Hybrid 2020 Materials and Structures, Web-Conference, Germany, 2020.
LibreCat
 
[160]
2020 | Journal Article | LibreCat-ID: 20842
T. Wu, S. R. Tinkloh, T. Tröster, W. Zinn, and T. Niendorf, “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method,” Journal of Composites Science, Art. no. 143, 2020, doi: 10.3390/jcs4030143.
LibreCat | DOI
 
[159]
2020 | Journal Article | LibreCat-ID: 15945
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “A micromechanical-based finite element simulation of process-induced residual stresses in metal-CFRP-hybrid structures,” Composite Structures, vol. 238, Art. no. 111926, 2020, doi: 10.1016/j.compstruct.2020.111926.
LibreCat | DOI
 
[158]
2020 | Conference Paper | LibreCat-ID: 27417
D. Chalicheemalapalli Jayasankar, T. Stallmeister, Z. Wang, and T. Tröster, “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED,” in Hybrid 2020 Materials and Structures, Digital, 2020, pp. 167–172.
LibreCat | Files available
 
[157]
2019 | Report | LibreCat-ID: 21210
D. Ahlers and T. Tröster, Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. TIB: Universität Paderborn, 2019.
LibreCat | DOI
 
[156]
2019 | Conference Paper | LibreCat-ID: 16793
F. Pfeifer, A. Dietrich, T. Marten, T. Tröster, and B. Nacke, “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process,” in Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Luleå, 2019, pp. 585–593.
LibreCat
 
[155]
2019 | Conference Paper | LibreCat-ID: 16794
J. A. Striewe, R. Thomas, F. Fischer, T. Wiens, and T. Tröster, “Energieabsorptions- und Versagensverhalten eines automobilen Seitenschwellers mit lokaler Verstärkung aus kohlenstofffaserverstärktem Kunststoff nach Alterung,” presented at the Tagung Werkstoffprüfung 2019, Neu-Ulm, 2019.
LibreCat
 
[154]
2019 | Misc | LibreCat-ID: 16825
D. Ahlers and T. Tröster, Performance Parameters and HIP Routes for additively manufactured titanium alloy Ti6Al4V. Maastricht: EuroPM, 2019.
LibreCat
 
[153]
2019 | Conference Paper | LibreCat-ID: 16827
A. A. Camberg and T. Tröster, “Challenges in fracture modeling under non-isothermal forming conditions using the example of a new forming process for aluminum blanks,” in 26. Sächsische Fachtagung Umformtechnik, Dresden, 2019.
LibreCat
 
[152]
2019 | Conference Paper | LibreCat-ID: 16831
S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “A micromechanical based finite element simulation of process induced residual stresses in metal-CFRP-hybrid structures,” presented at the 22nd International Conference on Composite Structures (ICCS22) and 1st Chinese Conference on Composite Structures (CCCS1), Wuhan, 2019.
LibreCat
 
[151]
2019 | Journal Article | LibreCat-ID: 15875
A. A. Camberg, T. Tröster, F. Bohner, and J. Tölle, “Predicting plasticity and fracture of severe pre-strained EN AW-5182 by Yld2000 yield locus and Hosford-Coulomb fracture model in sheet forming applications,” IOP Conference Series: Materials Science and Engineering, vol. 651, p. 012057, 2019.
LibreCat | DOI
 
[150]
2019 | Journal Article | LibreCat-ID: 15950
E. F. Akbulut Irmak and T. Tröster, “Fracture prediction of additively manufactured AlSi10Mg materials,” Procedia Structural Integrity, pp. 190–197, 2019.
LibreCat | DOI
 
[149]
2019 | Conference Paper | LibreCat-ID: 15976
E. F. Akbulut Irmak, J. Hanses, S. Schweizer, and T. Tröster, “Modeling the Energy Absorption Characteristics of Wood Crash Elements,” presented at the 12th European LS-DYNA Conference, Koblenz, 2019.
LibreCat
 
[148]
2019 | Report | LibreCat-ID: 16029
T. Marten and T. Tröster, Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Düsseldorf: Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat
 
[147]
2019 | Conference Paper | LibreCat-ID: 16030
M. Triebus, S. Bienia, T. Marten, T. Tröster, and K. Dröder, “Press Hardening Integrated Structuring for Hybrid Components,” presented at the 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden, 2019.
LibreCat
 
[146]
2019 | Book Chapter | LibreCat-ID: 13436
A. A. Camberg, I. Stratmann, and T. Tröster, “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES,” in Technologies for economical and functional lightweight design, Berlin, Heidelberg, 2019.
LibreCat | DOI
 
[145]
2019 | Conference Paper | LibreCat-ID: 16032
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, and T. Tröster, “Self-sealing tool concept for RTM-processes,” presented at the 22nd International Conference on Composite Materials (ICCM22 2019), Melbourne , 2019.
LibreCat
 
[144]
2019 | Conference Paper | LibreCat-ID: 16033
T. Stallmeister, D. Chalicheemalapalli Jayasankar, Z. Wang, and T. Tröster, “Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse,” presented at the Tagung Werkstoffprüfung 2019, Neu-Ulm, 2019.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 16027
A. A. Camberg, M. Striewe, T. Tröster, F. Bohner, and J. Tölle, “Investigation of ductility and fracture behavior of EN AW-5182 H18 at non-isothermal forming conditions,” presented at the 5th MATFEM Conference, Schloss Hohenkammer, 2019.
LibreCat
 
[142]
2019 | Book | LibreCat-ID: 16795
J. A. Striewe, T. Tröster, J. Kowatz, G. Meschut, R. Grothe, and G. Grundmeier, Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. Hannover: Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat
 
[141]
2019 | Conference Paper | LibreCat-ID: 16028
R. Grothe, J. A. Striewe, J. Kowatz, G. Grundmeier, T. Tröster, and G. Meschut, “Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK,” presented at the 39. EFB-Kolloquium, Bad Boll , 2019.
LibreCat
 
[140]
2018 | Conference Abstract | LibreCat-ID: 19868
A. A. Camberg, T. Tröster, N. Sotirov, J. Tölle, and F. Bohner, “Investigation of ductility and damage characteristics of EN AW-5182 H18 at non-isothermal forming conditions,” in Materials Science and Engineering (MSE) Congress 2018, Darmstadt, 2018.
LibreCat
 
[139]
2018 | Misc | LibreCat-ID: 6594
L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, Additiv gefertigte, akustische Diffusor-Strukturen für Ultraschallanwendungen. Workshop “Messtechnische Anwendungen von Ultraschall”, Drübeck, 2018.
LibreCat
 
[138]
2018 | Conference Paper | LibreCat-ID: 15960
N. Weiß-Borkowski et al., “Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models,” 2018.
LibreCat | DOI
 
[137]
2018 | Conference Paper | LibreCat-ID: 16034
A. A. Camberg and T. Tröster, “Optimization-based material design of tailored stacked hybrids for further improvement in lightweight car body structures,” in HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, Bremen, 2018.
LibreCat
 
[136]
2018 | Conference Paper | LibreCat-ID: 16039
D. Ahlers and T. Tröster, “Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V,” presented at the Rapid.Tech 2018 – Fachforum Luftfahrt, Erfurt, 2018.
LibreCat
 
[135]
2018 | Conference Paper | LibreCat-ID: 16040
Z. Wang and T. Tröster, “Influences of interface on the adhesion and corrosion properties of steel-CFRP hybrid structures manufactured by vacuum assisted resin transfer moulding,” presented at the 21th International Conference on Composite Structures (ICCS21), Bologna, Italy, 2018.
LibreCat
 
[134]
2018 | Conference Paper | LibreCat-ID: 16042 | OA
M. Triebus, T. Tröster, A. A. Camberg, S. Bienia, and K. Dröder, “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures,” in 15. Deutsches LS-Dyna Forum, Bamberg, 2018.
LibreCat | Download (ext.)
 
[133]
2018 | Conference Paper | LibreCat-ID: 16043 | OA
A. A. Camberg, T. Tröster, A. Schneidt , N. Sotirov , and J. Tölle, “The influence of damage accumulation on failure prediction: a comparative assessment of *MAT_224 and *MAT_024 + GISSMO for the application in non-isothermal sheet metal forming,” in 15. Deutsches LS-Dyna Forum, Bamberg, 2018.
LibreCat | Download (ext.)
 
[132]
2018 | Conference Abstract | LibreCat-ID: 16056
S. Schweizer and T. Tröster, “Holz als Werkstoff im Automobil,” presented at the 2. Siegener Leichtbaukolloquium, Siegen, 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 16057
Z. Wang and T. Tröster, “Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess,” presented at the 2. Siegener Leichtbaukolloquium, Siegen, 2018.
LibreCat
 
[130]
2018 | Journal Article | LibreCat-ID: 13439
A. A. Camberg, F. Bohner, J. Tölle, A. Schneidt, S. Meiners, and T. Tröster, “Formability enhancement of EN AW-5182 H18 aluminum alloy sheet metal parts in a flash forming process: testing, calibration and evaluation of fracture models,” IOP Conference Series: Materials Science and Engineering, 2018.
LibreCat | DOI
 
[129]
2018 | Conference Paper | LibreCat-ID: 16052
I. Horwath, S. Dohmeier-Fischer, N. Weiß-Borkowski, and T. Tröster, “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING,” presented at the 12th International Technology, Education and Development Conference, Valencia, 2018, doi: 10.21125/inted.2018.1651.
LibreCat | DOI
 
[128]
2018 | Journal Article | LibreCat-ID: 15957
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[127]
2018 | Conference Paper | LibreCat-ID: 16048
D. Ahlers et al., “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing,” 2018, doi: 10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[126]
2018 | Conference Paper | LibreCat-ID: 16054
N. Weiß-Borkowski, I. Horwath, A. Berscheid, S. Dohmeier-Fischer, and T. Tröster, “NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH,” 2018, doi: 10.21125/inted.2018.1298.
LibreCat | DOI
 
[125]
2018 | Conference Paper | LibreCat-ID: 16035
J. A. Striewe, R. Grothe, J. Kowatz, T. Tröster, G. Grundmeier, and G. Meschut, “Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness,” presented at the 18th European Conference on Composite Materials, Athen, 2018.
LibreCat
 
[124]
2018 | Conference Paper | LibreCat-ID: 16050
A. A. Camberg et al., “LHYBS – Lightweight Design by Novel Hybrid Materials,” presented at the 8th NRW Nano Conference, Innovations in Materials and Applications, Dortmund, 2018.
LibreCat
 
[123]
2018 | Conference Paper | LibreCat-ID: 16055
C. Zinn, Z. Wang, T. Tröster, and M. Schaper, “Forming and corrosion stability of a laser pre-treated metal surface-influence on the properties of metal-CFRP hybrid structures made by VARTM,” presented at the 3rd Int Conf on Hybrid Materials and Structures, Bremen, 2018.
LibreCat
 
[122]
2018 | Journal Article | LibreCat-ID: 24104
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[121]
2018 | Journal Article | LibreCat-ID: 41525
F. Hengsbach et al., “Inline additively manufactured functionally graded multi-materials: microstructural and mechanical characterization of 316L parts with H13 layers,” Progress in Additive Manufacturing, vol. 3, no. 4, pp. 221–231, 2018, doi: 10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[120]
2018 | Journal Article | LibreCat-ID: 15958
C. Zinn et al., “Shear strength and failure behaviour of laser nano-structured and conventionally pre-treated interfaces in intrinsically manufactured CFRP-steel hybrids,” Composites Part B: Engineering, pp. 173–185, 2018, doi: 10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[119]
2017 | Conference Paper | LibreCat-ID: 6559
L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, “Additively manufactured acoustic diffuser structures for ultrasonic measurement applications,” in Proceedings of Meetings on Acoustics, 2017, p. 030004.
LibreCat | DOI
 
[118]
2017 | Conference Paper | LibreCat-ID: 16791
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating,” presented at the 5th International Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam, 2017.
LibreCat
 
[117]
2017 | Conference Paper | LibreCat-ID: 16792
A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Effects of Holes in Blanks for Press Hardening Process due to Induction Heating,” presented at the XVIII International UIE-Congress Electrotechnologies for Material Processing, Hannover, 2017.
LibreCat
 
[116]
2017 | Journal Article | LibreCat-ID: 15941
C. Reuter, K.-H. Sauerland, and T. Tröster, “Experimental and numerical crushing analysis of circular CFRP tubes under axial impact loading,” Composite Structures, pp. 33–44, 2017.
LibreCat | DOI
 
[115]
2017 | Journal Article | LibreCat-ID: 15942
C. Reuter and T. Tröster, “Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under axial impact,” Thin-Walled Structures, vol. 117, pp. 1–9, 2017.
LibreCat | DOI
 
[114]
2017 | Journal Article | LibreCat-ID: 15944
J. A. Striewe, C. Reuter, K.-H. Sauerland, and T. Tröster, “Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites,” Thin-Walled Structures, pp. 501–508, 2017.
LibreCat | DOI
 
[113]
2017 | Conference Paper | LibreCat-ID: 16059
N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, and W. Bleck, “Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model,” in Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.
LibreCat | DOI
 
[112]
2017 | Journal Article | LibreCat-ID: 16062
S. Schweizer, A. Becker-Staines, and T. Tröster, “Separation of Hybrid Structures for the Reclaim of their Single Components,” Key Engineering Materials, pp. 568–575, 2017.
LibreCat | DOI
 
[111]
2017 | Conference Paper | LibreCat-ID: 16063
D. Ahlers and T. Tröster, “Approve of porostiy for increasing process speed in the laser melting process of Ti6Al4V,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 
[110]
2017 | Conference Paper | LibreCat-ID: 16065
P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, and T. Tröster, “Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,” presented at the 2nd Conference & Exhibition on Light Materials, Bremen, 2017.
LibreCat
 
[109]
2017 | Conference Paper | LibreCat-ID: 16071
Z. Wang, P. Kutz, and T. Tröster, “Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,” presented at the 15. Bielefelder Werkstofftag, Bielefeld, 2017.
LibreCat
 
[108]
2017 | Conference Paper | LibreCat-ID: 16072
N. Weiß Borkowski, A. A. Camberg, T. Tröster, and T. Marten, “Influence of strain rate on the instability in high speed cupping tests – Investigation on dual phase steel and numerical validation by CRACH,” presented at the 4th MATFEM Conference, Schloss Hohenkammer, 2017.
LibreCat
 
[107]
2017 | Conference Paper | LibreCat-ID: 16073
N. Weiß Borkowski, T. Marten, T. Tröster, and A. Schulz Beenken, “Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates,” presented at the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA, 2017.
LibreCat
 
[106]
2017 | Conference Paper | LibreCat-ID: 16074
D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,” presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
LibreCat
 
[105]
2017 | Conference Paper | LibreCat-ID: 16075
D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil, Nördlingen, 2017.
LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16066
D. Ahlers et al., “Increasing process speed in the laser melting process of Ti6Al4V and the reduction of pores during hot isostatic pressing,” presented at the 28th Annual International Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
LibreCat
 
[103]
2017 | Journal Article | LibreCat-ID: 24108
F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[102]
2017 | Journal Article | LibreCat-ID: 41530
F. Hengsbach et al., “Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties,” Materials & Design, vol. 133, pp. 136–142, 2017, doi: 10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[101]
2017 | Journal Article | LibreCat-ID: 15961
K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2017, doi: 10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[100]
2016 | Journal Article | LibreCat-ID: 15962
T. Tröster, A. A. Camberg, B. Sanitther, Z. Wang, and C. Lauter, “Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive applications by intrinsic resin transfer moulding technology,” International Journal of Automotive Composites, vol. 2, pp. 229–243, 2016.
LibreCat | DOI
 
[99]
2016 | Journal Article | LibreCat-ID: 16139
S. Schweizer and T. Tröster, “Recyclingkonzepte für hybride Strukturen,” Carbon Composites Magazin, no. 2, p. 23, 2016.
LibreCat
 
[98]
2016 | Journal Article | LibreCat-ID: 16146
V. Grienitz, T. Tröster, and S. Meiners, “Technikevaluation für die generative Fertigung eines Serien-Radträgers,” ATZ - Automobiltechnische Zeitschrift, pp. 36–41, 2016.
LibreCat | DOI
 
[97]
2016 | Conference Paper | LibreCat-ID: 16264
Z. Wang and T. Tröster, “Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren,” presented at the EuroHybrid, Kaiserslautern, 2016.
LibreCat
 
[96]
2016 | Conference Paper | LibreCat-ID: 16266
J. A. Striewe, C. Reuter, C. Oberkönig, C. Lauter, and T. Tröster, “Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe,” presented at the Polymertec16, Merseburg, 2016.
LibreCat
 
[95]
2016 | Conference Paper | LibreCat-ID: 16267
J. A. Striewe, C. Lauter, C. Reuter, and T. Tröster, “Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites,” presented at the 19th International Conference on Composite Structures, Porto, 2016.
LibreCat
 
[94]
2016 | Conference Paper | LibreCat-ID: 16268
J. A. Striewe, C. Reuter, C. Lauter, and T. Tröster, “Innovative largescale Production Process for multilayered Sheet-Metal-FRP-Structures,” presented at the 19th International Conference on Composite Structures, Porto, 2016.
LibreCat
 
[93]
2016 | Conference Paper | LibreCat-ID: 16269
Z. Wang, C. Lauter, J. Löseke, and T. Tröster, “CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications,” presented at the International Conference on Automotive Composites, ICAutoC 2016, Lisbon, Portugal, 2016.
LibreCat
 
[92]
2016 | Journal Article | LibreCat-ID: 16270
T. Hickmann, D. Ahlers, and T. Tröster, “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten,” Der Stahlformenbauer , no. 5, 2016.
LibreCat
 
[91]
2016 | Journal Article | LibreCat-ID: 15963
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, vol. 2, pp. 272–298, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[90]
2016 | Conference Paper | LibreCat-ID: 16138
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess,” presented at the Faszination hybrider Leichtbau 2016, Wolfsburg, 2016.
LibreCat
 
[89]
2016 | Conference Paper | LibreCat-ID: 16265
C. Zinn et al., “Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften,” presented at the EuroHybrid, Kaiserslautern, 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16140
M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, and G. Meschut, “Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications,” Journal of Materials Science Research, Art. no. 15, 2016, doi: 10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[87]
2016 | Journal Article | LibreCat-ID: 16143
K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating the influence of different surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive Composites, Art. no. 244, 2016, doi: 10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 16141
T. Tröster et al., “Influences of interface and surface pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured by resin transfer moulding,” International Journal of Automotive Composites, Art. no. 272, 2016, doi: 10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[85]
2016 | Journal Article | LibreCat-ID: 16137
C. Lauter, C. Reuter, S. Wu, and T. Tröster, “Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology,” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 10, no. 5, pp. 875–880, 2016, doi: doi.org/10.5281/zenodo.1124481.
LibreCat | DOI
 
[84]
2015 | Journal Article | LibreCat-ID: 15964
S. Leuders, M. Vollmer, F. Brenne, T. Tröster, and T. Niendorf, “Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting,” Metallurgical and Materials Transactions A, pp. 3816–3823, 2015.
LibreCat | DOI
 
[83]
2015 | Conference Paper | LibreCat-ID: 16131
T. Marten, H. Block, and T. Tröster, “Partial hardening of new press hardenable steels,” presented at the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2015, Toronto, Canada, 2015.
LibreCat
 
[82]
2015 | Conference Paper | LibreCat-ID: 16132
N. Weiß Borkowski, T. Marten, H. Block, and T. Tröster, “Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests,” presented at the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, CHS2 2015, Toronto, Canada, 2015.
LibreCat
 
[81]
2015 | Conference Paper | LibreCat-ID: 16135
M. Frantz, C. Lauter, Z. Wang, and T. Tröster, “Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK),” presented at the Tagung Werkstoffprüfung 2015, Bad Neuenahr, 2015, pp. 139–144.
LibreCat
 
[80]
2015 | Conference Paper | LibreCat-ID: 16136
C. Reuter, T. Tröster, and C. Lauter, “Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna,” presented at the Tagung Werkstoffprüfung 2015, Tagung Werkstoffprüfung 2015, Bad Neuenahr, 2015, pp. 127–132.
LibreCat
 
[79]
2015 | Conference Paper | LibreCat-ID: 16258
W. Reschetnik, S. Leuders, A. Riemer, T. Tröster, H. A. Richard, and T. Niendorf, “Fatigue life prediction for metals processed by Selective Laser Melting using finite element analyses,” presented at the TMS Annual Meeting & Exhibition, Orlando, Florida, USA, 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16259
Z. Wang, C. Lauter, B. Sanitther, M. Frantz, and T. Tröster, “Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding,” presented at the 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal, 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16260
C. Lauter, Z. Wang, T. Tröster, R. Brandis, and D. Köchling, “Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design,” presented at the 18th International Conference on Composite Structures (ICCS18), Lisbon, Portugal, 2015.
LibreCat
 
[76]
2015 | Conference Paper | LibreCat-ID: 16261
S. Leuders, S. Meiners, A. Taube, T. Tröster, and T. Niendorf, “Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting,” presented at the 13th World Conference on Titanium, San Diego, USA, 2015.
LibreCat
 
[75]
2015 | Conference Paper | LibreCat-ID: 16263
N. Wingenbach and T. Tröster, “Material follows form follows function,” presented at the Hybrid-Expo, Stuttgart, 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16133
C. Lauter, Z. Wang, I. Koke, and T. Tröster, “Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology,” presented at the 20th International Conference on Composite Materials, ICCM20, Copenhagen, Denmark, 2015.
LibreCat
 
[73]
2015 | Book Chapter | LibreCat-ID: 16134
P. Abel, C. Lauter, T. Gries, and T. Tröster, “Textile composites in the automotive industry,” in Fatigue of Textile Composites, 2015.
LibreCat | DOI
 
[72]
2015 | Conference Paper | LibreCat-ID: 16262
M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess,” presented at the Hybrid-Expo, Stuttgart, 2015.
LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 23061
C. Lauter, Z. Wang, I. Koke, and T. Tröster, “Influences of process parameters on the mechanical properties of hybrid sheet metal-FRP-composites manufactured by prepreg press technology,” 2015.
LibreCat
 
[70]
2014 | Journal Article | LibreCat-ID: 15966
T. Niendorf et al., “Functionally Graded Alloys Obtained by Additive Manufacturing,” Advanced Engineering Materials, pp. 857–861, 2014.
LibreCat | DOI
 
[69]
2014 | Journal Article | LibreCat-ID: 15967
A. Riemer, S. Leuders, M. Thöne, H. A. Richard, T. Tröster, and T. Niendorf, “On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting,” Engineering Fracture Mechanics, pp. 15–25, 2014.
LibreCat | DOI
 
[68]
2014 | Conference Paper | LibreCat-ID: 16097
M. Klein et al., “Characterization of the corrosion influence on the fatigue behavior of intrinsic CFRP-steel-hybrids,” presented at the International Conference: Euro Hybrid Materials and Structures, Stade, 2014, pp. 188–193.
LibreCat
 
[67]
2014 | Conference Paper | LibreCat-ID: 16099
M. Frantz et al., “Efficient manufacturing of hybrid structures consisting of steel and CFRP with using residual heat / Effiziente Herstellung von Hybridbauteilen aus Stahl und CFK mithilfe von Restwärmeausnutzung,” presented at the New Developments in Sheet Metal Forming (Neuere Entwicklungen in der Blechumformung), Stuttgart, 2014.
LibreCat
 
[66]
2014 | Conference Paper | LibreCat-ID: 16120
H. Block, T. Marten, and T. Tröster, “Crash simulation of high strength automotive components using advanced failure models,” presented at the 4th international conference on steels in cars and trucks, Braunschweig, 2014.
LibreCat
 
[65]
2014 | Journal Article | LibreCat-ID: 16122
C. Lauter, J. Niewel, and T. Tröster, “Quasistatic and crash tests of steel-CFRP hybrid pillar structures for automotive applications,” International Journal of Automotive Composites, 2014.
LibreCat | DOI
 
[64]
2014 | Conference Paper | LibreCat-ID: 16128
H. Block, T. Marten, N. Weiß Borkowski, and T. Tröster, “Crash performance of the new press hardenable steel 15MnB6,” presented at the 3rd MATFEM conference, Hohenkammer, 2014.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16129
C. Reuter, D. Flore, S. Pöhler, K. H. Sauerland, and T. Tröster, “Numerical simulation of the energy absorption of fiber-reinforced plastics,” presented at the Tagungsband NAFEMS Seminar: Simulation of Composites – A Closed Process Chain, Leipzig, 2014.
LibreCat
 
[62]
2014 | Conference Paper | LibreCat-ID: 16130
N. Weiß Borkowski, T. Marten, and T. Tröster, “Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch,” presented at the Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband Werkstoffprüfung 2014, Berlin, 2014.
LibreCat
 
[61]
2014 | Conference Paper | LibreCat-ID: 16255
S. Leuders, A. Riemer, H. A. Richard, T. Tröster, and T. Niendorf, “Selective-Laser-Melting materials under cyclic loading: Influence of process-inherent defects on the initiation and propagation of fatigue cracks,” presented at the 25th Colloquium on Fatigue Mechanisms, Erlangen, Germany, 2014.
LibreCat
 
[60]
2014 | Conference Paper | LibreCat-ID: 16256
S. Leuders, T. Tröster, F. Brenne, A. Riemer, H. A. Richard, and T. Niendorf, “Evaluation of the effect of defects on the mechanical performance of components manufactured by selective laser melting,” presented at the American Society for Precision Engineering 2014 Spring Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, San Francisco, California, USA, 2014.
LibreCat
 
[59]
2014 | Conference Paper | LibreCat-ID: 16257
S. Leuders, T. Tröster, A. Riemer, H. A. Richard, and T. Niendorf, “On the mechanical performance of structures manufactured by selective laser melting: Damage initiation and propagation,” presented at the Additive Manufacturing with Powder Metallurgy Conference, Orlando, Florida, USA, 2014.
LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16098
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic,” Stade, 2014, pp. 101–108.
LibreCat
 
[57]
2014 | Journal Article | LibreCat-ID: 16125
E. Moritzer, C. Budde, T. Tröster, and S. Pöhler, “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination,” Joining Plastics , vol. 8, no. 2, pp. 100–105, 2014.
LibreCat
 
[56]
2014 | Journal Article | LibreCat-ID: 15965
S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, “On the fatigue properties of metals manufactured by selective laser melting – The role of ductility,” Journal of Materials Research, pp. 1911–1919, 2014, doi: 10.1557/jmr.2014.157.
LibreCat | DOI
 
[55]
2013 | Journal Article | LibreCat-ID: 15968
T. Niendorf, S. Leuders, A. Riemer, H. A. Richard, T. Tröster, and D. Schwarze, “Highly Anisotropic Steel Processed by Selective Laser Melting,” Metallurgical and Materials Transactions B, pp. 794–796, 2013.
LibreCat | DOI
 
[54]
2013 | Journal Article | LibreCat-ID: 16016
A. Riemer, S. Leuders, H. A. Richard, and T. Tröster, “Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗,” Materials Testing, pp. 537–543, 2013.
LibreCat | DOI
 
[53]
2013 | Conference Paper | LibreCat-ID: 16017
T. Marten, H. Block, T. Tröster, T. Gerber, S. Sikora, and F.-J. Lenze, “Graded Lightweight Structures Through Hot Forming,” presented at the 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel (CHS2 2013), Lulea, 2013.
LibreCat
 
[52]
2013 | Conference Paper | LibreCat-ID: 16018
C. Lauter, T. Hochschulz, M. Frantz, and T. Tröster, “Influences of Automotive Process Characteristics on Hybrid Structures,” presented at the 17th International Conference on Composite Structures (ICCS17), Porto , 2013.
LibreCat
 
[51]
2013 | Conference Paper | LibreCat-ID: 16019
B. Siewers, C. Lauter, and T. Tröster, “Curing of fibre reinforced plastics by resistance heating of sheet metal in a hybrid structure,” presented at the 17th International Conference on Composite Structures (ICCS17), Porto, 2013.
LibreCat
 
[50]
2013 | Conference Paper | LibreCat-ID: 16020
T. Tröster, C. Lauter, and C. Reuter, “Crashworthiness of Hybrid Structures,” presented at the 4th International Conference on Integrity, Reliability and Failure (IRF2013), Funchal, Portugal, 2013.
LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16021
B. Siewers, C. Lauter, and T. Tröster, “Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures,” presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada, 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16022
C. Lauter, T. Krooß, and T. Tröster, “Manufacturing of Hybrid Structures by Prepreg Press Technology,” presented at the 19th International Conference on Composite Materials (ICCM19), Montreal, Canada, 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16023
T. Tröster, C. Lauter, and C. Reuter, “Leichtbau mit Hybridstrukturen im Automobil,” presented at the Siegener Kolloquium “Leichtbau in Karosserie- und Fahrwerksstrukturen,” Siegen, 2013.
LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16024
S. Leuders, A. Riemer, T. Niendorf, H. A. Richard, and T. Tröster, “On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects,” presented at the Materials Science & Technology, Montreal, Canada, 2013.
LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16025
T. Marten, H. Block, and T. Tröster, “Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess,” presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2013.
LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16026
A. Riemer, S. Leuders, H. A. Richard, and T. Tröster, “Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen,” presented at the Herbstsitzung 2013 des DGM/DVM Arbeitskreises Materialermüdung, Dortmund, 2013.
LibreCat
 
[43]
2013 | Book Chapter | LibreCat-ID: 16096
C. Lauter, T. Tröster, and C. Reuter, “Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications,” in Advanced Composite Materials for Automotive Applications, Chichester, UK, 2013.
LibreCat | DOI
 
[42]
2012 | Journal Article | LibreCat-ID: 15981
T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, and M. Thöne, “Automobilleichtbau mit innovativen Werkstoffen und Prozessen,” Forschungsforum Paderborn, vol. 15, no. 15/2012, pp. 30–38, 2012.
LibreCat
 
[41]
2012 | Journal Article | LibreCat-ID: 15983
C. Lauter, S. Werneke, B. Siewers, and T. Tröster, “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen,” Lightweight Design, pp. 53–58, 2012.
LibreCat | DOI
 
[40]
2012 | Conference Paper | LibreCat-ID: 15985
C. Reuter, M. Frantz, C. Lauter, H. Block, and T. Tröster, “Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP,” presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy, 2012.
LibreCat
 
[39]
2012 | Conference Paper | LibreCat-ID: 15987
C. Lauter, M. Frantz, J. P. Kohler, and T. Tröster, “Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements,” presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy, 2012.
LibreCat
 
[38]
2012 | Conference Paper | LibreCat-ID: 15988
C. Lauter, M. Sarrazin, and T. Tröster, “Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics,” presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal, 2012.
LibreCat
 
[37]
2012 | Journal Article | LibreCat-ID: 15989
L. Ickert, D. Thomas, T. Tröster, and L. Eckstein, “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise,” FAT-Schriftenreihe 244, no. 244, 2012.
LibreCat
 
[36]
2012 | Conference Paper | LibreCat-ID: 16004
C. Lauter, B. Siewers, B. Zanft, and T. Tröster, “Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements,” presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto , 2012.
LibreCat
 
[35]
2012 | Conference Paper | LibreCat-ID: 16007
M. Thöne, S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V,” presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA, 2012.
LibreCat
 
[34]
2012 | Journal Article | LibreCat-ID: 16008
A. Riemer, S. Leuders, T. Tröster, and H. A. Richard, “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4,” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, 2012.
LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16009
S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement,” presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel, 2012.
LibreCat
 
[32]
2012 | Report | LibreCat-ID: 16012
T. Tröster, T. Marten, S. Adelbert, and A. Kadim, P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Düsseldorf: Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16015
S. Leuders et al., “On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance,” International Journal of Fatigue, pp. 300–307, 2012.
LibreCat | DOI
 
[30]
2012 | Journal Article | LibreCat-ID: 15984
H. C. Schmidt et al., “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” Key Engineering Materials, pp. 295–300, 2012, doi: 10.4028/www.scientific.net/kem.504-506.295.
LibreCat | DOI
 
[29]
2012 | Conference Paper | LibreCat-ID: 15986
B. Gorny et al., “Simulation and manufacturing of deep drawn parts reinforced by carbon fibre prepregs,” presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy, 2012.
LibreCat
 
[28]
2012 | Journal Article | LibreCat-ID: 16010
C. Lauter, T. Tröster, R. Brandis, and J. Gausemeier, “Methodik für die Produktentstehung hybrider Leichtbaustrukturen,” Lightweight Design, vol. 5, pp. 50–56, 2012, doi: 10.1365/s35725-013-0137-4.
LibreCat | DOI
 
[27]
2011 | Journal Article | LibreCat-ID: 15969
C. Lauter, M. Sarrazin, and T. Tröster, “Multimaterialsysteme höchstfest verbunden,” Adhäsion – Kleben und Dichten, vol. 3/2011, pp. 39–43, 2011.
LibreCat
 
[26]
2011 | Conference Paper | LibreCat-ID: 15971
M. Frantz, O. Stübbe, C. Lauter, J. Schrange, and T. Tröster, “Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder,” presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011.
LibreCat
 
[25]
2011 | Conference Paper | LibreCat-ID: 15972
D. Thomas, H. Block, T. Tröster, and J. Krogmeier, “Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung,” presented at the InnoMateria – Interdisziplinäre Kongressmesse für innovative Werkstoffe, Köln, 2011.
LibreCat
 
[24]
2011 | Journal Article | LibreCat-ID: 15974
T. Marten, C. Lauter, and T. Tröster, “Automobilleichtbau durch höchstfeste Multimaterialsysteme,” Ingenieurspiegel, vol. 2/2011, pp. 67–69, 2011.
LibreCat
 
[23]
2011 | Journal Article | LibreCat-ID: 15975
C. Lauter, D. Thomas, M. Frantz, J. Niewel, and T. Tröster, “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen,” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, vol. 2, pp. 6–7, 2011.
LibreCat
 
[22]
2011 | Journal Article | LibreCat-ID: 15980
C. Lauter, M. Frantz, B. Siewers, and T. Tröster, “Hybrid structures for tailored structural automotive components,” JEC Composites Magazine, vol. 69, pp. 35–37, 2011.
LibreCat
 
[21]
2011 | Conference Paper | LibreCat-ID: 15990
D. Thomas, H. Block, and T. Tröster, “Production of load-adapted lightweight designs by partial hardening,” presented at the 3rd International Conference on Steels in Cars and Trucks (SCT), Salzburg, 2011.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 15992
B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Tröster, and H. J. Maier, “In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting,” Materials Science and Engineering: A, vol. 528, no. 27, pp. 7962–7967, 2011.
LibreCat | DOI
 
[19]
2011 | Journal Article | LibreCat-ID: 15993
C. Lauter, M. Frantz, and T. Tröster, “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen,” Lightweight Design, vol. 4, pp. 48–54, 2011.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15996
M. Frantz, C. Lauter, and T. Tröster, “Advanced manufacturing technologies for automotive structures in multi-material design consisting of high-strength steels and CFRP,” presented at the 56th International Scientific Colloquium (56th IWK), Ilmenau, 2011.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed