Thomas Tröster

thomas.troester@uni-paderborn.de
ID
553

217 Publications

Mark all

[217]
2023 | Journal Article | LibreCat-ID: 43464 | OA
Ostermann, Moritz, et al. “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures.” Energies, vol. 16, no. 8, 3371, MDPI AG, 2023, doi:10.3390/en16083371.
LibreCat | DOI | Download (ext.)
 
[216]
2023 | Conference Paper | LibreCat-ID: 44154
Lückenkötter, Julian, et al. “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector.” Materials Research Proceedings, vol. 28, Materials Research Forum LLC, 2023, pp. 249–58, doi:10.21741/9781644902479-27.
LibreCat | DOI
 
[215]
2023 | Conference Paper | LibreCat-ID: 44502
Ostermann, Moritz, et al. “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility.” Towards the New Normal in Mobility, edited by Heike Proff, Springer Fachmedien Wiesbaden, 2023, doi:10.1007/978-3-658-39438-7_25.
LibreCat | DOI
 
[214]
2023 | Journal Article | LibreCat-ID: 37200
Gnaase, Stefan, et al. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.” Crystals, vol. 13, no. 2, 157, MDPI AG, 2023, doi:10.3390/cryst13020157.
LibreCat | DOI
 
[213]
2023 | Journal Article | LibreCat-ID: 45782 | OA
Grenz, Julian, et al. “Integrating Prospective LCA in the Development of Automotive Components.” Sustainability, vol. 15, no. 13, 10041, MDPI AG, 2023, doi:10.3390/su151310041.
LibreCat | Files available | DOI | Download (ext.)
 
[212]
2023 | Journal Article | LibreCat-ID: 46486
Pfeifer, Florian, et al. “Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes.” Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 11, no. 3, SDEWES Centre, 2023, pp. 1–20, doi:10.13044/j.sdewes.d11.0450.
LibreCat | DOI
 
[211]
2023 | Conference Abstract | LibreCat-ID: 42459
Ostermann, Moritz, et al. “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen.” WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, 2023.
LibreCat
 
[210]
2023 | Journal Article | LibreCat-ID: 46495
Wu, Shuang, et al. “Adhesion Properties of the Hybrid System Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” The Journal of Adhesion, Informa UK Limited, 2023, pp. 1–29, doi:10.1080/00218464.2023.2245758.
LibreCat | DOI
 
[209]
2023 | Journal Article | LibreCat-ID: 46494
Freund, Jonathan, et al. “Relationship between Laser-Generated Micro- and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.” The Journal of Adhesion, Informa UK Limited, 2023, pp. 1–31, doi:10.1080/00218464.2023.2223475.
LibreCat | DOI
 
[208]
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business Media LLC, 2023, doi:10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[207]
2023 | Conference Paper | LibreCat-ID: 48597
Wu, Shuang, et al. Intrinsic Forming of Hybrid Parts Made of Laser-Structured Aluminium Sheet and CFRP-Prepreg. 2023.
LibreCat
 
[206]
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak, Emine Fulya, et al. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.” Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, 2023, doi:10.14361/9783839463772-006.
LibreCat | DOI
 
[205]
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter, Julian, et al. Analysis and Optimization of Joint Formation in Hybrid Compression Molding. 2023.
LibreCat
 
[204]
2023 | Conference Paper | LibreCat-ID: 49436
Kaiser, Maximilian Alexander, et al. “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.” Workshop Warmblechumformung, edited by Marion Merklein, vol. 18, Lehrstuhl für Fertigungstechnologie, 2023, pp. 99–118.
LibreCat
 
[203]
2023 | Conference Paper | LibreCat-ID: 50742 | OA
Bödger, Christian, et al. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.
LibreCat | Files available | Download (ext.)
 
[202]
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar, Deviprasad, et al. In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding. 2023.
LibreCat | Files available
 
[201]
2022 | Newspaper Article | LibreCat-ID: 33001
Linnig, Caterina, and Thomas Tröster. “Sauber Recyceln- Innovative Verfahrenskombination Mit Ultraschall Ermöglicht Sicheren Umgang Mit Recycelten Carbonfasern.” CU Reports, 2022.
LibreCat
 
[200]
2022 | Conference Abstract | LibreCat-ID: 37258
Haller, Sebastian, et al. “The Environmental Impact on the Strain Rate Dependent Energy Absorption Capability of a Hybrid Crash Absorber Element.” 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
 
[199]
2022 | Conference Paper | LibreCat-ID: 32819
Pfeifer, Florian, et al. “Investigation on Hot Sheet Metal Forming by Means of a Longitudinal Flux Inductor.” Proceedings of the 6th International Conference on Steels in Cars and Trucks, 2022.
LibreCat
 
[198]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[197]
2022 | Journal Article | LibreCat-ID: 31496
Wu, Tao, et al. “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects.” Journal of Composites Science, vol. 6, no. 5, 138, MDPI AG, 2022, doi:10.3390/jcs6050138.
LibreCat | DOI
 
[196]
2022 | Journal Article | LibreCat-ID: 34069
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.
LibreCat | DOI
 
[195]
2022 | Journal Article | LibreCat-ID: 32814
Wu, T., et al. “Characterization of Residual Stresses in Fiber Metal Laminate Interfaces - A Combined Approach Applying Hole-Drilling Method and Energy-Dispersive X-Ray Diffraction.” Composite Structures, 116071, Elsevier BV, 2022, doi:10.1016/j.compstruct.2022.116071.
LibreCat | DOI
 
[194]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[193]
2022 | Journal Article | LibreCat-ID: 32813 | OA
Martin, Sven, et al. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.” Key Engineering Materials, vol. 927, 2022, doi:  https://doi.org/10.4028/p-09md1c.
LibreCat | DOI | Download (ext.)
 
[192]
2022 | Journal Article | LibreCat-ID: 32869
Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1457–67, doi:10.4028/p-5fxp53.
LibreCat | DOI
 
[191]
2022 | Conference Abstract | LibreCat-ID: 32871
Triebus, Marcel, et al. “Advanced Automotive Components by Fiber-Metal-Laminates.” Materials in Car Body Engineering - Bad Nauheim, 2022.
LibreCat
 
[190]
2022 | Conference Abstract | LibreCat-ID: 32875
Ostermann, Moritz, et al. “Individualisierung Des ÖPNV - Integration Technischer Und Sozialer Dimensionen Nachhaltiger Mobilität.” 14. Wissenschaftsforum Mobilität, 2022.
LibreCat
 
[189]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus, Marcel, et al. “Forming Simulation of Tailored Press Hardened Parts.” 13th European LS-DYNA Conference 2021, 2021.
LibreCat | Download (ext.)
 
[188]
2021 | Book | LibreCat-ID: 28461
Tröster, Thomas, et al. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
 
[187]
2021 | Book (Editor) | LibreCat-ID: 26996
Koch, Rainer, et al., editors. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Shaker Verlag, 2021.
LibreCat
 
[186]
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh, Steffen Rainer, et al. Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis. 2021.
LibreCat
 
[185]
2021 | Conference Paper | LibreCat-ID: 20857
Camberg, Alan Adam, et al. Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing. Springer, 2021, doi:https://doi.org/10.1007/978-3-662-62924-6_28.
LibreCat | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 20858
Camberg, Alan Adam, et al. A New Numerical Method for Potential Anaylsis and Design of Hybrid Components from Full Vehicle Simulations: Implementation and Component Design. Springer, 2021, doi:https://doi.org/10.1007/978-3-662-62924-6_30.
LibreCat | DOI
 
[183]
2021 | Journal Article | LibreCat-ID: 22518 | OA
Triebus, Marcel, et al. “A New Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.” IOP Conference Series: Materials Science and Engineering, 012052, IOP Publishing Ltd, 2021, doi:10.1088/1757-899x/1157/1/012052.
LibreCat | DOI | Download (ext.)
 
[182]
2021 | Journal Article | LibreCat-ID: 22859
Grothe, Richard, et al. “Enhanced Corrosion Resistance of Adhesive/Galvanised Steel Interfaces by Nanocrystalline ZnO Thin Film Deposition and Molecular Adhesion Promoting Films.” The Journal of Adhesion, Taylor & Francis , 2021, doi:10.1080/00218464.2021.1957676.
LibreCat | DOI
 
[181]
2021 | Report | LibreCat-ID: 29807
Linnig, Caterina, and Thomas Tröster. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat
 
[180]
2021 | Journal Article | LibreCat-ID: 24131
Wu, Tao, et al. “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components.” Metals, 335, 2021, doi:10.3390/met11020335.
LibreCat | DOI
 
[179]
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh, Steffen Rainer, et al. “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis.” Metals, 156, 2021, doi:10.3390/met11010156.
LibreCat | DOI
 
[178]
2021 | Journal Article | LibreCat-ID: 24130
Magnier, A., et al. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.” Polymer Testing, 107146, 2021, doi:10.1016/j.polymertesting.2021.107146.
LibreCat | DOI
 
[177]
2021 | Conference Abstract | LibreCat-ID: 21726 | OA
Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development of Hybrid Materials.” 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
LibreCat | Download (ext.)
 
[176]
2021 | Journal Article | LibreCat-ID: 33895
Camberg, Alan Adam, et al. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials, vol. 14, no. 17, 5106, MDPI AG, 2021, doi:10.3390/ma14175106.
LibreCat | DOI
 
[175]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[174]
2021 | Journal Article | LibreCat-ID: 23431
Cheng, C., et al. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.” Composites Part B: Engineering, vol. 224, 109209, 2021, doi:10.1016/j.compositesb.2021.109209.
LibreCat | DOI
 
[173]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[172]
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister, Tim, et al. Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases. 2021.
LibreCat
 
[171]
2021 | Journal Article | LibreCat-ID: 24009
Camberg, Alan Adam, et al. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials, 5106, 2021, doi:10.3390/ma14175106.
LibreCat | DOI
 
[170]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[169]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[168]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin, Sven, et al. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics, vol. 6, 100065, Elsevier BV, 2021, doi:10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[167]
2020 | Conference Paper | LibreCat-ID: 20843
Wu, Tao, et al. “Residual Stress Measurement in GFRP/Steel Hybrid Components.” Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[166]
2020 | Conference Paper | LibreCat-ID: 20854 | OA
Camberg, Alan Adam, and Thomas Tröster. A Simplified Method for the Evaluation of the Layer Compression Test Using One 3D Digital Image Correlation System and Considering the Material Anisotropy by the Equibiaxial Lankford Parameter. 2020, doi:10.1088/1757-899X/967/1/012077.
LibreCat | DOI | Download (ext.)
 
[165]
2020 | Conference Paper | LibreCat-ID: 20856 | OA
Camberg, Alan Adam, et al. Predicting Fracture at Non-Isothermal Forming Conditions: A Temperature Dependent Extension of the LS-DYNA GISSMO Fracture Indicator Framework. 2020, doi:10.13140/RG.2.2.23924.17288.
LibreCat | DOI | Download (ext.)
 
[164]
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer, Swetlana, et al. Wood-Based Materials as a Sustainable Alternative for Future Car Body Construction. Automotive Circle, 2020.
LibreCat
 
[163]
2020 | Conference Paper | LibreCat-ID: 16939 | OA
Triebus, Marcel, and Thomas Tröster. “A Holistic Approach to Optimization-Based Design of Hybrid Materials.” Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
LibreCat | Download (ext.)
 
[162]
2020 | Conference Paper | LibreCat-ID: 15490 | OA
Claes, Leander, et al. “Reduction of Systematic Measurement Deviation in Acoustic Absorption Measurement Systems.” Fortschritte Der Akustik - DAGA 2020, 2020, pp. 1077–80.
LibreCat | Files available
 
[161]
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh, Steffen Rainer, et al. “Numerical Investigation of the Hole-Drilling Method Applied to Intrinsic Manufactured Metal-CFRP Hybrids.” Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[160]
2020 | Journal Article | LibreCat-ID: 20842
Wu, Tao, et al. “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method.” Journal of Composites Science, 143, 2020, doi:10.3390/jcs4030143.
LibreCat | DOI
 
[159]
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh, Steffen Rainer, et al. “A Micromechanical-Based Finite Element Simulation of Process-Induced Residual Stresses in Metal-CFRP-Hybrid Structures.” Composite Structures, vol. 238, 111926, 2020, doi:10.1016/j.compstruct.2020.111926.
LibreCat | DOI
 
[158]
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar, Deviprasad, et al. “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED.” Hybrid 2020 Materials and Structures, edited by Joachim M Hausmann et al., 2020, pp. 167–72.
LibreCat | Files available
 
[157]
2019 | Report | LibreCat-ID: 21210
Ahlers, Dominik, and Thomas Tröster. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. Universität Paderborn, 2019, doi:https://doi.org/10.2314/KXP:1695591887.
LibreCat | DOI
 
[156]
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer, Florian, et al. “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process.” Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 2019, pp. 585–93.
LibreCat
 
[155]
2019 | Conference Paper | LibreCat-ID: 16794
Striewe, Jan André, et al. Energieabsorptions- Und Versagensverhalten Eines Automobilen Seitenschwellers Mit Lokaler Verstärkung Aus Kohlenstofffaserverstärktem Kunststoff Nach Alterung. DGM-Inventum GmbH , 2019.
LibreCat
 
[154]
2019 | Misc | LibreCat-ID: 16825
Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM, 2019.
LibreCat
 
[153]
2019 | Conference Paper | LibreCat-ID: 16827
Camberg, Alan Adam, and Thomas Tröster. “Challenges in Fracture Modeling under Non-Isothermal Forming Conditions Using the Example of a New Forming Process for Aluminum Blanks.” 26. Sächsische Fachtagung Umformtechnik, 2019.
LibreCat
 
[152]
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh, Steffen Rainer, et al. A Micromechanical Based Finite Element Simulation of Process Induced Residual Stresses in Metal-CFRP-Hybrid Structures. 2019.
LibreCat
 
[151]
2019 | Journal Article | LibreCat-ID: 15875
Camberg, Alan Adam, et al. “Predicting Plasticity and Fracture of Severe Pre-Strained EN AW-5182 by Yld2000 Yield Locus and Hosford-Coulomb Fracture Model in Sheet Forming Applications.” IOP Conference Series: Materials Science and Engineering, vol. 651, 2019, p. 012057, doi:10.1088/1757-899X/651/1/012057.
LibreCat | DOI
 
[150]
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak, Emine Fulya, and Thomas Tröster. “Fracture Prediction of Additively Manufactured AlSi10Mg Materials.” Procedia Structural Integrity, 2019, pp. 190–97, doi:10.1016/j.prostr.2019.12.101.
LibreCat | DOI
 
[149]
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak, Emine Fulya, et al. Modeling the Energy Absorption Characteristics of Wood Crash Elements. 2019.
LibreCat
 
[148]
2019 | Report | LibreCat-ID: 16029
Marten, Thorsten, and Thomas Tröster. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat
 
[147]
2019 | Conference Paper | LibreCat-ID: 16030
Triebus, Marcel, et al. Press Hardening Integrated Structuring for Hybrid Components. Verlag Wissenschaftliche Scripten, 2019.
LibreCat
 
[146]
2019 | Book Chapter | LibreCat-ID: 13436
Camberg, Alan Adam, et al. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” Technologies for Economical and Functional Lightweight Design, 2019, doi:10.1007/978-3-662-58206-0_12.
LibreCat | DOI
 
[145]
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister, Tim, et al. Self-Sealing Tool Concept for RTM-Processes. 2019.
LibreCat
 
[144]
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister, Tim, et al. Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. 2019.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 16027
Camberg, Alan Adam, et al. “Investigation of Ductility and Fracture Behavior of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” 5th MATFEM Conference, MATFEM, 2019.
LibreCat
 
[142]
2019 | Book | LibreCat-ID: 16795
Striewe, Jan André, et al. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat
 
[141]
2019 | Conference Paper | LibreCat-ID: 16028
Grothe, R., et al. Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. 2019.
LibreCat
 
[140]
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg, Alan Adam, et al. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” Materials Science and Engineering (MSE) Congress 2018, 2018.
LibreCat
 
[139]
2018 | Misc | LibreCat-ID: 6594
Claes, Leander, et al. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. 2018.
LibreCat
 
[138]
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski, Nathalie, et al. Forming Limit Curves of DP600 Determined in High-Speed Nakajima Tests and Predicted by Two Different Strain-Rate-Sensitive Models. 2018, doi:10.1063/1.5035024.
LibreCat | DOI
 
[137]
2018 | Conference Paper | LibreCat-ID: 16034
Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.” HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat
 
[136]
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, Dominik, and Thomas Tröster. Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. 2018.
LibreCat
 
[135]
2018 | Conference Paper | LibreCat-ID: 16040
Wang, Z., and Thomas Tröster. Influences of Interface on the Adhesion and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted Resin Transfer Moulding. 2018.
LibreCat
 
[134]
2018 | Conference Paper | LibreCat-ID: 16042 | OA
Triebus, Marcel, et al. “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.” 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[133]
2018 | Conference Paper | LibreCat-ID: 16043 | OA
Camberg, Alan Adam, et al. “The Influence of Damage Accumulation on Failure Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal Sheet Metal Forming.” 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[132]
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer, Swetlana, and Thomas Tröster. Holz als Werkstoff im Automobil. 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 16057
Wang, Z., and Thomas Tröster. Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. 2018.
LibreCat
 
[130]
2018 | Journal Article | LibreCat-ID: 13439
Camberg, Alan Adam, et al. “Formability Enhancement of EN AW-5182 H18 Aluminum Alloy Sheet Metal Parts in a Flash Forming Process: Testing, Calibration and Evaluation of Fracture Models.” IOP Conference Series: Materials Science and Engineering, 012018, 2018, doi:10.1088/1757-899x/418/1/012018.
LibreCat | DOI
 
[129]
2018 | Conference Paper | LibreCat-ID: 16052
Horwath, Ilona, et al. “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.” INTED2018 Proceedings, 2018, doi:10.21125/inted.2018.1651.
LibreCat | DOI
 
[128]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[127]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, et al. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” Contributed Papers from MS&T17, 2018, doi:10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[126]
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski, Nathalie, et al. “NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH.” INTED2018 Proceedings, 2018, doi:10.21125/inted.2018.1298.
LibreCat | DOI
 
[125]
2018 | Conference Paper | LibreCat-ID: 16035
Striewe, Jan André, et al. Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness. 2018.
LibreCat
 
[124]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, et al. LHYBS – Lightweight Design by Novel Hybrid Materials. 2018.
LibreCat
 
[123]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., et al. Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM. 2018.
LibreCat
 
[122]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[121]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, vol. 3, no. 4, Springer Science and Business Media LLC, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[120]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, et al. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, pp. 173–85, doi:10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[119]
2017 | Conference Paper | LibreCat-ID: 6559
Claes, Leander, et al. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic Measurement Applications.” Proceedings of Meetings on Acoustics, 2017, p. 030004, doi:10.1121/2.0000688.
LibreCat | DOI
 
[118]
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich, André, et al. Investigation of Geometrical Discontinuities in Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating. 2017.
LibreCat
 
[117]
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich, André, et al. Effects of Holes in Blanks for Press Hardening Process Due to Induction Heating. 2017.
LibreCat
 
[116]
2017 | Journal Article | LibreCat-ID: 15941
Reuter, Corin, et al. “Experimental and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.” Composite Structures, 2017, pp. 33–44, doi:10.1016/j.compstruct.2017.04.052.
LibreCat | DOI
 
[115]
2017 | Journal Article | LibreCat-ID: 15942
Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures, vol. 117, 2017, pp. 1–9, doi:10.1016/j.tws.2017.03.034.
LibreCat | DOI
 
[114]
2017 | Journal Article | LibreCat-ID: 15944
Striewe, Jan André, et al. “Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.” Thin-Walled Structures, 2017, pp. 501–08, doi:10.1016/j.tws.2017.11.011.
LibreCat | DOI
 
[113]
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski, Nathalie, et al. “Forming Limit Curves Determined in High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017, doi:10.1063/1.5007961.
LibreCat | DOI
 
[112]
2017 | Journal Article | LibreCat-ID: 16062
Schweizer, Swetlana, et al. “Separation of Hybrid Structures for the Reclaim of Their Single Components.” Key Engineering Materials, 2017, pp. 568–75, doi:10.4028/www.scientific.net/kem.742.568.
LibreCat | DOI
 
[111]
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, Dominik, and Thomas Tröster. Approve of Porostiy for Increasing Process Speed in the Laser Melting Process of Ti6Al4V. 2017.
LibreCat
 
[110]
2017 | Conference Paper | LibreCat-ID: 16065
Kutz, P., et al. Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. 2017.
LibreCat
 
[109]
2017 | Conference Paper | LibreCat-ID: 16071
Wang, Z., et al. Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. 2017.
LibreCat
 
[108]
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski, N., et al. Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation by CRACH. 2017.
LibreCat
 
[107]
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski, N., et al. Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. 2017.
LibreCat
 
[106]
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive Fertigung. 2017.
LibreCat
 
[105]
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der additiven Fertigung. 2017.
LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, et al. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[103]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[102]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, vol. 133, Elsevier BV, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[101]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2017, doi:10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[100]
2016 | Journal Article | LibreCat-ID: 15962
Tröster, Thomas, et al. “Manufacturing and Investigation of Steel-CFRP Hybrid Pillar Structures for Automotive Applications by Intrinsic Resin Transfer Moulding Technology.” International Journal of Automotive Composites, vol. 2, 2016, pp. 229–43, doi:10.1504/ijautoc.2016.10005304.
LibreCat | DOI
 
[99]
2016 | Journal Article | LibreCat-ID: 16139
Schweizer, Swetlana, and Thomas Tröster. “Recyclingkonzepte für hybride Strukturen.” Carbon Composites Magazin, no. 2, 2016, p. 23.
LibreCat
 
[98]
2016 | Journal Article | LibreCat-ID: 16146
Grienitz, Volker, et al. “Technikevaluation für die generative Fertigung eines Serien-Radträgers.” ATZ - Automobiltechnische Zeitschrift, 2016, pp. 36–41, doi:10.1007/s35148-016-0090-5.
LibreCat | DOI
 
[97]
2016 | Conference Paper | LibreCat-ID: 16264
Wang, Z., and Thomas Tröster. Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren. 2016.
LibreCat
 
[96]
2016 | Conference Paper | LibreCat-ID: 16266
Striewe, Jan André, et al. Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe. 2016.
LibreCat
 
[95]
2016 | Conference Paper | LibreCat-ID: 16267
Striewe, Jan André, et al. Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites. 2016.
LibreCat
 
[94]
2016 | Conference Paper | LibreCat-ID: 16268
Striewe, Jan André, et al. Innovative Largescale Production Process for Multilayered Sheet-Metal-FRP-Structures. 2016.
LibreCat
 
[93]
2016 | Conference Paper | LibreCat-ID: 16269
Wang, Z., et al. CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications. 2016.
LibreCat
 
[92]
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., et al. “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten.” Der Stahlformenbauer , no. 5, Technischer Fachverlag Möller, 2016.
LibreCat
 
[91]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, vol. 2, 2016, pp. 272–98, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[90]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. 2016.
LibreCat
 
[89]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert, Mathias, et al. “Novel Process Approach for In-Situ Insertion of Functional Elements in RTM-Applications.” Journal of Materials Science Research, 15, 2016, doi:10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[87]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2016, doi:10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 272, 2016, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[85]
2016 | Journal Article | LibreCat-ID: 16137
Lauter, Christian, et al. “Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology.” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 10, no. 5, World Academy of Science, Engineering and Technology, 2016, pp. 875–80, doi:doi.org/10.5281/zenodo.1124481.
LibreCat | DOI
 
[84]
2015 | Journal Article | LibreCat-ID: 15964
Leuders, Stefan, et al. “Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting.” Metallurgical and Materials Transactions A, 2015, pp. 3816–23, doi:10.1007/s11661-015-2864-x.
LibreCat | DOI
 
[83]
2015 | Conference Paper | LibreCat-ID: 16131
Marten, Thorsten, et al. Partial Hardening of New Press Hardenable Steels. 2015.
LibreCat
 
[82]
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski, Nathalie, et al. Multi-Axial Material Testing at High Strain Rates in High Speed Cupping Tests. 2015.
LibreCat
 
[81]
2015 | Conference Paper | LibreCat-ID: 16135
Frantz, M., et al. Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK). Verlag Stahleisen GmbH, 2015, pp. 139–44.
LibreCat
 
[80]
2015 | Conference Paper | LibreCat-ID: 16136
Reuter, C., et al. Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna. Verlag Stahleisen GmbH, 2015, pp. 127–32.
LibreCat
 
[79]
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik, W., et al. Fatigue Life Prediction for Metals Processed by Selective Laser Melting Using Finite Element Analyses. 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16259
Wang, Z., et al. Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding. 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16260
Lauter, C., et al. Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design. 2015.
LibreCat
 
[76]
2015 | Conference Paper | LibreCat-ID: 16261
Leuders, S., et al. Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting. 2015.
LibreCat
 
[75]
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach, Nils, and Thomas Tröster. Material Follows Form Follows Function. 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16133
Lauter, C., et al. Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology. 2015.
LibreCat
 
[73]
2015 | Book Chapter | LibreCat-ID: 16134
Abel, P., et al. “Textile Composites in the Automotive Industry.” Fatigue of Textile Composites, 2015, doi:10.1016/b978-1-78242-281-5.00016-x.
LibreCat | DOI
 
[72]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. 2015.
LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 23061
Lauter, Christian, et al. “Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology.” 20th International Conference on Composite Materials, Copenhagen, 2015.
LibreCat
 
[70]
2014 | Journal Article | LibreCat-ID: 15966
Niendorf, Thomas, et al. “Functionally Graded Alloys Obtained by Additive Manufacturing.” Advanced Engineering Materials, 2014, pp. 857–61, doi:10.1002/adem.201300579.
LibreCat | DOI
 
[69]
2014 | Journal Article | LibreCat-ID: 15967
Riemer, A., et al. “On the Fatigue Crack Growth Behavior in 316L Stainless Steel Manufactured by Selective Laser Melting.” Engineering Fracture Mechanics, 2014, pp. 15–25, doi:10.1016/j.engfracmech.2014.03.008.
LibreCat | DOI
 
[68]
2014 | Conference Paper | LibreCat-ID: 16097
Klein, M., et al. Characterization of the Corrosion Influence on the Fatigue Behavior of Intrinsic CFRP-Steel-Hybrids. 2014, pp. 188–93.
LibreCat
 
[67]
2014 | Conference Paper | LibreCat-ID: 16099
Frantz, M., et al. Efficient Manufacturing of Hybrid Structures Consisting of Steel and CFRP with Using Residual Heat / Effiziente Herstellung von Hybridbauteilen Aus Stahl Und CFK Mithilfe von Restwärmeausnutzung. 2014.
LibreCat
 
[66]
2014 | Conference Paper | LibreCat-ID: 16120
Block, Holger, et al. Crash Simulation of High Strength Automotive Components Using Advanced Failure Models. 2014.
LibreCat
 
[65]
2014 | Journal Article | LibreCat-ID: 16122
Lauter, Christian, et al. “Quasistatic and Crash Tests of Steel-CFRP Hybrid Pillar Structures for Automotive Applications.” International Journal of Automotive Composites, 52, 2014, doi:10.1504/ijautoc.2014.064127.
LibreCat | DOI
 
[64]
2014 | Conference Paper | LibreCat-ID: 16128
Block, Holger, et al. Crash Performance of the New Press Hardenable Steel 15MnB6. 2014.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16129
Reuter, Corin, et al. Numerical Simulation of the Energy Absorption of Fiber-Reinforced Plastics. 2014.
LibreCat
 
[62]
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski, Nathalie, et al. Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. 2014.
LibreCat
 
[61]
2014 | Conference Paper | LibreCat-ID: 16255
Leuders, S., et al. Selective-Laser-Melting Materials under Cyclic Loading: Influence of Process-Inherent Defects on the Initiation and Propagation of Fatigue Cracks. 2014.
LibreCat
 
[60]
2014 | Conference Paper | LibreCat-ID: 16256
Leuders, S., et al. Evaluation of the Effect of Defects on the Mechanical Performance of Components Manufactured by Selective Laser Melting. 2014.
LibreCat
 
[59]
2014 | Conference Paper | LibreCat-ID: 16257
Leuders, S., et al. On the Mechanical Performance of Structures Manufactured by Selective Laser Melting: Damage Initiation and Propagation. 2014.
LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer, Elmar, et al. Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic. 2014, pp. 101–08.
LibreCat
 
[57]
2014 | Journal Article | LibreCat-ID: 16125
Moritzer, Elmar, et al. “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination.” Joining Plastics , vol. 8, no. 2, 2014, pp. 100–05.
LibreCat
 
[56]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
LibreCat | DOI
 
[55]
2013 | Journal Article | LibreCat-ID: 15968
Niendorf, Thomas, et al. “Highly Anisotropic Steel Processed by Selective Laser Melting.” Metallurgical and Materials Transactions B, 2013, pp. 794–96, doi:10.1007/s11663-013-9875-z.
LibreCat | DOI
 
[54]
2013 | Journal Article | LibreCat-ID: 16016
Riemer, Andre, et al. “Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗.” Materials Testing, 2013, pp. 537–43, doi:10.3139/120.110468.
LibreCat | DOI
 
[53]
2013 | Conference Paper | LibreCat-ID: 16017
Marten, Thorsten, et al. Graded Lightweight Structures Through Hot Forming. 2013.
LibreCat
 
[52]
2013 | Conference Paper | LibreCat-ID: 16018
Lauter, Christian, et al. Influences of Automotive Process Characteristics on Hybrid Structures. 2013.
LibreCat
 
[51]
2013 | Conference Paper | LibreCat-ID: 16019
Siewers, Bernd, et al. Curing of Fibre Reinforced Plastics by Resistance Heating of Sheet Metal in a Hybrid Structure. 2013.
LibreCat
 
[50]
2013 | Conference Paper | LibreCat-ID: 16020
Tröster, Thomas, et al. Crashworthiness of Hybrid Structures. 2013.
LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16021
Siewers, Bernd, et al. Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures. 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16022
Lauter, Christian, et al. Manufacturing of Hybrid Structures by Prepreg Press Technology. 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16023
Tröster, Thomas, et al. Leichtbau mit Hybridstrukturen im Automobil. 2013.
LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16024
Leuders, S., et al. On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects. 2013.
LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16025
Marten, Thorsten, et al. Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess. 2013.
LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16026
Riemer, A., et al. Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen. 2013.
LibreCat
 
[43]
2013 | Book Chapter | LibreCat-ID: 16096
Lauter, Christian, et al. “Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications.” Advanced Composite Materials for Automotive Applications, 2013, doi:10.1002/9781118535288.ch7.
LibreCat | DOI
 
[42]
2012 | Journal Article | LibreCat-ID: 15981
Tröster, Thomas, et al. “Automobilleichtbau mit innovativen Werkstoffen und Prozessen.” Forschungsforum Paderborn, vol. 15, no. 15/2012, Universität Paderborn, 2012, pp. 30–38.
LibreCat
 
[41]
2012 | Journal Article | LibreCat-ID: 15983
Lauter, Christian, et al. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.” Lightweight Design, 2012, pp. 53–58, doi:10.1365/s35725-012-0079-2.
LibreCat | DOI
 
[40]
2012 | Conference Paper | LibreCat-ID: 15985
Reuter, Corin, et al. Simulation and Testing of Hybrid Structures Consisting of Press-Hardened Steel and CFRP. 2012.
LibreCat
 
[39]
2012 | Conference Paper | LibreCat-ID: 15987
Lauter, Christian, et al. Crash Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements. 2012.
LibreCat
 
[38]
2012 | Conference Paper | LibreCat-ID: 15988
Lauter, Christian, et al. Joining Technologies for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics. 2012.
LibreCat
 
[37]
2012 | Journal Article | LibreCat-ID: 15989
Ickert, Leif, et al. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.” FAT-Schriftenreihe 244, no. 244, Forschungsvereinigung Automobiltechnik e.V., 2012.
LibreCat
 
[36]
2012 | Conference Paper | LibreCat-ID: 16004
Lauter, Christian, et al. Crash Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP Reinforcements. 2012.
LibreCat
 
[35]
2012 | Conference Paper | LibreCat-ID: 16007
Thöne, M., et al. Influence of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V. 2012.
LibreCat
 
[34]
2012 | Journal Article | LibreCat-ID: 16008
Riemer, A., et al. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, Deutscher Verband für Materialforschung und -prüfung e.V., 2012.
LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16009
Leuders, S., et al. Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. 2012.
LibreCat
 
[32]
2012 | Report | LibreCat-ID: 16012
Tröster, Thomas, et al. P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16015
Leuders, S., et al. “On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance.” International Journal of Fatigue, 2012, pp. 300–07, doi:10.1016/j.ijfatigue.2012.11.011.
LibreCat | DOI
 
[30]
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, Hans Christian, et al. “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.” Key Engineering Materials, 2012, pp. 295–300, doi:10.4028/www.scientific.net/kem.504-506.295.
LibreCat | DOI
 
[29]
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., et al. Simulation and Manufacturing of Deep Drawn Parts Reinforced by Carbon Fibre Prepregs. 2012.
LibreCat
 
[28]
2012 | Journal Article | LibreCat-ID: 16010
Lauter, Christian, et al. “Methodik für die Produktentstehung hybrider Leichtbaustrukturen.” Lightweight Design, vol. 5, 2012, pp. 50–56, doi:10.1365/s35725-013-0137-4.
LibreCat | DOI
 
[27]
2011 | Journal Article | LibreCat-ID: 15969
Lauter, Christian, et al. “Multimaterialsysteme höchstfest verbunden.” Adhäsion – Kleben und Dichten, vol. 3/2011, Springer Vieweg, 2011, pp. 39–43.
LibreCat
 
[26]
2011 | Conference Paper | LibreCat-ID: 15971
Frantz, Meike, et al. Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. 2011.
LibreCat
 
[25]
2011 | Conference Paper | LibreCat-ID: 15972
Thomas, D., et al. Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. 2011.
LibreCat
 
[24]
2011 | Journal Article | LibreCat-ID: 15974
Marten, Thorsten, et al. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.” Ingenieurspiegel, vol. 2/2011, Public Verlagsgesellschaft und Anzeigenagentur, 2011, pp. 67–69.
LibreCat
 
[23]
2011 | Journal Article | LibreCat-ID: 15975
Lauter, Christian, et al. “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen.” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, vol. 2, HW-Verlag, 2011, pp. 6–7.
LibreCat
 
[22]
2011 | Journal Article | LibreCat-ID: 15980
Lauter, Christian, et al. “Hybrid Structures for Tailored Structural Automotive Components.” JEC Composites Magazine, vol. 69, JEC Composites, 2011, pp. 35–37.
LibreCat
 
[21]
2011 | Conference Paper | LibreCat-ID: 15990
Thomas, D., et al. Production of Load-Adapted Lightweight Designs by Partial Hardening. 2011.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 15992
Gorny, B., et al. “In Situ Characterization of the Deformation and Failure Behavior of Non-Stochastic Porous Structures Processed by Selective Laser Melting.” Materials Science and Engineering: A, vol. 528, no. 27, 2011, pp. 7962–67, doi:10.1016/j.msea.2011.07.026.
LibreCat | DOI
 
[19]
2011 | Journal Article | LibreCat-ID: 15993
Lauter, Christian, et al. “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen.” Lightweight Design, vol. 4, 2011, pp. 48–54.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15996
Frantz, Meike, et al. Advanced Manufacturing Technologies for Automotive Structures in Multi-Material Design Consisting of High-Strength Steels and CFRP. 2011.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed

217 Publications

Mark all

[217]
2023 | Journal Article | LibreCat-ID: 43464 | OA
Ostermann, Moritz, et al. “Integrating Prospective Scenarios in Life Cycle Engineering: Case Study of Lightweight Structures.” Energies, vol. 16, no. 8, 3371, MDPI AG, 2023, doi:10.3390/en16083371.
LibreCat | DOI | Download (ext.)
 
[216]
2023 | Conference Paper | LibreCat-ID: 44154
Lückenkötter, Julian, et al. “Feasibility Study of Compression Molding for Large Reinforcement Structures in the Commercial Vehicle Sector.” Materials Research Proceedings, vol. 28, Materials Research Forum LLC, 2023, pp. 249–58, doi:10.21741/9781644902479-27.
LibreCat | DOI
 
[215]
2023 | Conference Paper | LibreCat-ID: 44502
Ostermann, Moritz, et al. “Individualization of Public Transport – Integration of Technical and Social Dimensions of Sustainable Mobility.” Towards the New Normal in Mobility, edited by Heike Proff, Springer Fachmedien Wiesbaden, 2023, doi:10.1007/978-3-658-39438-7_25.
LibreCat | DOI
 
[214]
2023 | Journal Article | LibreCat-ID: 37200
Gnaase, Stefan, et al. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.” Crystals, vol. 13, no. 2, 157, MDPI AG, 2023, doi:10.3390/cryst13020157.
LibreCat | DOI
 
[213]
2023 | Journal Article | LibreCat-ID: 45782 | OA
Grenz, Julian, et al. “Integrating Prospective LCA in the Development of Automotive Components.” Sustainability, vol. 15, no. 13, 10041, MDPI AG, 2023, doi:10.3390/su151310041.
LibreCat | Files available | DOI | Download (ext.)
 
[212]
2023 | Journal Article | LibreCat-ID: 46486
Pfeifer, Florian, et al. “Ecological and Economic Feasibility of Inductive Heating for Sustainable Press Hardening Processes.” Journal of Sustainable Development of Energy, Water and Environment Systems, vol. 11, no. 3, SDEWES Centre, 2023, pp. 1–20, doi:10.13044/j.sdewes.d11.0450.
LibreCat | DOI
 
[211]
2023 | Conference Abstract | LibreCat-ID: 42459
Ostermann, Moritz, et al. “NeMo.bil - Dekarbonisierung des Verkehrs mithilfe von Leichtbau-Fahrzeugschwärmen.” WerkstoffPlus Auto 13. Fachtagung für neue Fahrzeug- und Werkstoffkonzepte, 2023.
LibreCat
 
[210]
2023 | Journal Article | LibreCat-ID: 46495
Wu, Shuang, et al. “Adhesion Properties of the Hybrid System Made of Laser-Structured Aluminium EN AW 6082 and CFRP by Co-Bonding-Pressing Process.” The Journal of Adhesion, Informa UK Limited, 2023, pp. 1–29, doi:10.1080/00218464.2023.2245758.
LibreCat | DOI
 
[209]
2023 | Journal Article | LibreCat-ID: 46494
Freund, Jonathan, et al. “Relationship between Laser-Generated Micro- and Nanostructures and the Long-Term Stability of Bonded Epoxy-Aluminum Joints.” The Journal of Adhesion, Informa UK Limited, 2023, pp. 1–31, doi:10.1080/00218464.2023.2223475.
LibreCat | DOI
 
[208]
2023 | Journal Article | LibreCat-ID: 47536
Borgert, Thomas, et al. “Potentials of a Friction-Induced Recycling Process to Improve Resource and Energy Efficiency in Manufacturing Technology.” International Journal of Material Forming, vol. 16, no. 6, 59, Springer Science and Business Media LLC, 2023, doi:10.1007/s12289-023-01785-w.
LibreCat | DOI
 
[207]
2023 | Conference Paper | LibreCat-ID: 48597
Wu, Shuang, et al. Intrinsic Forming of Hybrid Parts Made of Laser-Structured Aluminium Sheet and CFRP-Prepreg. 2023.
LibreCat
 
[206]
2023 | Book Chapter | LibreCat-ID: 48643
Akbulut Irmak, Emine Fulya, et al. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.” Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, 2023, doi:10.14361/9783839463772-006.
LibreCat | DOI
 
[205]
2023 | Conference Paper | LibreCat-ID: 48586
Lückenkötter, Julian, et al. Analysis and Optimization of Joint Formation in Hybrid Compression Molding. 2023.
LibreCat
 
[204]
2023 | Conference Paper | LibreCat-ID: 49436
Kaiser, Maximilian Alexander, et al. “Untersuchung energieeffizienter und serientauglicher Erwärmungsstrategien mittels resistiver Erwärmung für den Presshärteprozess.” Workshop Warmblechumformung, edited by Marion Merklein, vol. 18, Lehrstuhl für Fertigungstechnologie, 2023, pp. 99–118.
LibreCat
 
[203]
2023 | Conference Paper | LibreCat-ID: 50742 | OA
Bödger, Christian, et al. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.
LibreCat | Files available | Download (ext.)
 
[202]
2023 | Conference Abstract | LibreCat-ID: 45831
Chalicheemalapalli Jayasankar, Deviprasad, et al. In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding. 2023.
LibreCat | Files available
 
[201]
2022 | Newspaper Article | LibreCat-ID: 33001
Linnig, Caterina, and Thomas Tröster. “Sauber Recyceln- Innovative Verfahrenskombination Mit Ultraschall Ermöglicht Sicheren Umgang Mit Recycelten Carbonfasern.” CU Reports, 2022.
LibreCat
 
[200]
2022 | Conference Abstract | LibreCat-ID: 37258
Haller, Sebastian, et al. “The Environmental Impact on the Strain Rate Dependent Energy Absorption Capability of a Hybrid Crash Absorber Element.” 5th International Conference Hybrid 2022 Material & Structures, 2022.
LibreCat
 
[199]
2022 | Conference Paper | LibreCat-ID: 32819
Pfeifer, Florian, et al. “Investigation on Hot Sheet Metal Forming by Means of a Longitudinal Flux Inductor.” Proceedings of the 6th International Conference on Steels in Cars and Trucks, 2022.
LibreCat
 
[198]
2022 | Journal Article | LibreCat-ID: 34097
Voswinkel, Dietrich, et al. “Co-Bonding of Carbon Fibre-Reinforced Epoxy and Galvanised Steel with Laser Structured Interface for Automotive Applications.” Advanced Composite Materials, Informa UK Limited, 2022, pp. 1–16, doi:10.1080/09243046.2022.2143746.
LibreCat | DOI
 
[197]
2022 | Journal Article | LibreCat-ID: 31496
Wu, Tao, et al. “Experimental Analysis of Residual Stresses in CFRPs through Hole-Drilling Method: The Role of Stacking Sequence, Thickness, and Defects.” Journal of Composites Science, vol. 6, no. 5, 138, MDPI AG, 2022, doi:10.3390/jcs6050138.
LibreCat | DOI
 
[196]
2022 | Journal Article | LibreCat-ID: 34069
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.
LibreCat | DOI
 
[195]
2022 | Journal Article | LibreCat-ID: 32814
Wu, T., et al. “Characterization of Residual Stresses in Fiber Metal Laminate Interfaces - A Combined Approach Applying Hole-Drilling Method and Energy-Dispersive X-Ray Diffraction.” Composite Structures, 116071, Elsevier BV, 2022, doi:10.1016/j.compstruct.2022.116071.
LibreCat | DOI
 
[194]
2022 | Journal Article | LibreCat-ID: 29951 | OA
Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
LibreCat | DOI | Download (ext.)
 
[193]
2022 | Journal Article | LibreCat-ID: 32813 | OA
Martin, Sven, et al. “Influence of the Surrounding Sheet Geometry on a Clinched Joint.” Key Engineering Materials, vol. 927, 2022, doi:  https://doi.org/10.4028/p-09md1c.
LibreCat | DOI | Download (ext.)
 
[192]
2022 | Journal Article | LibreCat-ID: 32869
Stallmeister, Tim, and Thomas Tröster. “In-Mold-Assembly of Hybrid Bending Structures by Compression Molding.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1457–67, doi:10.4028/p-5fxp53.
LibreCat | DOI
 
[191]
2022 | Conference Abstract | LibreCat-ID: 32871
Triebus, Marcel, et al. “Advanced Automotive Components by Fiber-Metal-Laminates.” Materials in Car Body Engineering - Bad Nauheim, 2022.
LibreCat
 
[190]
2022 | Conference Abstract | LibreCat-ID: 32875
Ostermann, Moritz, et al. “Individualisierung Des ÖPNV - Integration Technischer Und Sozialer Dimensionen Nachhaltiger Mobilität.” 14. Wissenschaftsforum Mobilität, 2022.
LibreCat
 
[189]
2021 | Conference Paper | LibreCat-ID: 28440 | OA
Triebus, Marcel, et al. “Forming Simulation of Tailored Press Hardened Parts.” 13th European LS-DYNA Conference 2021, 2021.
LibreCat | Download (ext.)
 
[188]
2021 | Book | LibreCat-ID: 28461
Tröster, Thomas, et al. Großserientaugliche induktive Platinenerwärmung für den Warmformprozess. Forschungsvereinigung Stahlanwendung e.V., 2021.
LibreCat
 
[187]
2021 | Book (Editor) | LibreCat-ID: 26996
Koch, Rainer, et al., editors. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess - Ergebnisbericht des BMBF Verbundprojektes OptiAMix. Shaker Verlag, 2021.
LibreCat
 
[186]
2021 | Conference Abstract | LibreCat-ID: 21442
Tinkloh, Steffen Rainer, et al. Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis. 2021.
LibreCat
 
[185]
2021 | Conference Paper | LibreCat-ID: 20857
Camberg, Alan Adam, et al. Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing. Springer, 2021, doi:https://doi.org/10.1007/978-3-662-62924-6_28.
LibreCat | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 20858
Camberg, Alan Adam, et al. A New Numerical Method for Potential Anaylsis and Design of Hybrid Components from Full Vehicle Simulations: Implementation and Component Design. Springer, 2021, doi:https://doi.org/10.1007/978-3-662-62924-6_30.
LibreCat | DOI
 
[183]
2021 | Journal Article | LibreCat-ID: 22518 | OA
Triebus, Marcel, et al. “A New Device for Determination of Forming-Limit-Curves under Hot-Forming Conditions.” IOP Conference Series: Materials Science and Engineering, 012052, IOP Publishing Ltd, 2021, doi:10.1088/1757-899x/1157/1/012052.
LibreCat | DOI | Download (ext.)
 
[182]
2021 | Journal Article | LibreCat-ID: 22859
Grothe, Richard, et al. “Enhanced Corrosion Resistance of Adhesive/Galvanised Steel Interfaces by Nanocrystalline ZnO Thin Film Deposition and Molecular Adhesion Promoting Films.” The Journal of Adhesion, Taylor & Francis , 2021, doi:10.1080/00218464.2021.1957676.
LibreCat | DOI
 
[181]
2021 | Report | LibreCat-ID: 29807
Linnig, Caterina, and Thomas Tröster. Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern. Deutsche Bundesstiftung Umwelt (DBU), 2021.
LibreCat
 
[180]
2021 | Journal Article | LibreCat-ID: 24131
Wu, Tao, et al. “Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components.” Metals, 335, 2021, doi:10.3390/met11020335.
LibreCat | DOI
 
[179]
2021 | Journal Article | LibreCat-ID: 21064
Tinkloh, Steffen Rainer, et al. “The Effect of Fiber Waviness on the Residual Stress State and Its Prediction by the Hole Drilling Method in Fiber Metal Laminates: A Global-Local Finite Element Analysis.” Metals, 156, 2021, doi:10.3390/met11010156.
LibreCat | DOI
 
[178]
2021 | Journal Article | LibreCat-ID: 24130
Magnier, A., et al. “On the Reliability of Residual Stress Measurements in Unidirectional Carbon Fibre Reinforced Epoxy Composites.” Polymer Testing, 107146, 2021, doi:10.1016/j.polymertesting.2021.107146.
LibreCat | DOI
 
[177]
2021 | Conference Abstract | LibreCat-ID: 21726 | OA
Triebus, Marcel, and Thomas Tröster. “HyOpt - Optimization-Based Development of Hybrid Materials.” 9th NRW Nano Conference - Innovations in Materials and Applications, 2021.
LibreCat | Download (ext.)
 
[176]
2021 | Journal Article | LibreCat-ID: 33895
Camberg, Alan Adam, et al. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials, vol. 14, no. 17, 5106, MDPI AG, 2021, doi:10.3390/ma14175106.
LibreCat | DOI
 
[175]
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat | DOI
 
[174]
2021 | Journal Article | LibreCat-ID: 23431
Cheng, C., et al. “Non-Linear Mean-Field Modelling of UD Composite Laminates Accounting for Average Asymmetric Plasticity of the Matrix, Debonding and Progressive Failure.” Composites Part B: Engineering, vol. 224, 109209, 2021, doi:10.1016/j.compositesb.2021.109209.
LibreCat | DOI
 
[173]
2021 | Journal Article | LibreCat-ID: 41508
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, vol. 831, 142312, Elsevier BV, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[172]
2021 | Conference Paper | LibreCat-ID: 26994
Stallmeister, Tim, et al. Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases. 2021.
LibreCat
 
[171]
2021 | Journal Article | LibreCat-ID: 24009
Camberg, Alan Adam, et al. “A Generalized Stress State and Temperature Dependent Damage Indicator Framework for Ductile Failure Prediction in Heat-Assisted Forming Operations.” Materials, 5106, 2021, doi:10.3390/ma14175106.
LibreCat | DOI
 
[170]
2021 | Journal Article | LibreCat-ID: 23898
Andreiev, Anatolii, et al. “Soft-Magnetic Behavior of Laser Beam Melted FeSi3 Alloy with Graded Cross-Section.” Journal of Materials Processing Technology, 117183, 2021, doi:10.1016/j.jmatprotec.2021.117183.
LibreCat | DOI
 
[169]
2021 | Journal Article | LibreCat-ID: 27700
Camberg, Alan Adam, et al. “Strength Enhancement of AlMg Sheet Metal Parts by Rapid Heating and Subsequent Cold Die Stamping of Severely Cold-Rolled Blanks.” Materials Science and Engineering: A, 142312, Elsevier, 2021, doi:10.1016/j.msea.2021.142312.
LibreCat | DOI
 
[168]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin, Sven, et al. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics, vol. 6, 100065, Elsevier BV, 2021, doi:10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[167]
2020 | Conference Paper | LibreCat-ID: 20843
Wu, Tao, et al. “Residual Stress Measurement in GFRP/Steel Hybrid Components.” Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[166]
2020 | Conference Paper | LibreCat-ID: 20854 | OA
Camberg, Alan Adam, and Thomas Tröster. A Simplified Method for the Evaluation of the Layer Compression Test Using One 3D Digital Image Correlation System and Considering the Material Anisotropy by the Equibiaxial Lankford Parameter. 2020, doi:10.1088/1757-899X/967/1/012077.
LibreCat | DOI | Download (ext.)
 
[165]
2020 | Conference Paper | LibreCat-ID: 20856 | OA
Camberg, Alan Adam, et al. Predicting Fracture at Non-Isothermal Forming Conditions: A Temperature Dependent Extension of the LS-DYNA GISSMO Fracture Indicator Framework. 2020, doi:10.13140/RG.2.2.23924.17288.
LibreCat | DOI | Download (ext.)
 
[164]
2020 | Conference Abstract | LibreCat-ID: 21712
Schweizer, Swetlana, et al. Wood-Based Materials as a Sustainable Alternative for Future Car Body Construction. Automotive Circle, 2020.
LibreCat
 
[163]
2020 | Conference Paper | LibreCat-ID: 16939 | OA
Triebus, Marcel, and Thomas Tröster. “A Holistic Approach to Optimization-Based Design of Hybrid Materials.” Proceedings 4th International Conference Hybrid Materials & Structures, 2020.
LibreCat | Download (ext.)
 
[162]
2020 | Conference Paper | LibreCat-ID: 15490 | OA
Claes, Leander, et al. “Reduction of Systematic Measurement Deviation in Acoustic Absorption Measurement Systems.” Fortschritte Der Akustik - DAGA 2020, 2020, pp. 1077–80.
LibreCat | Files available
 
[161]
2020 | Conference Paper | LibreCat-ID: 16930
Tinkloh, Steffen Rainer, et al. “Numerical Investigation of the Hole-Drilling Method Applied to Intrinsic Manufactured Metal-CFRP Hybrids.” Proceedings of the 4th International Conference Hybrid 2020 Materials and Structures, 2020.
LibreCat
 
[160]
2020 | Journal Article | LibreCat-ID: 20842
Wu, Tao, et al. “Determination and Validation of Residual Stresses in CFRP/Metal Hybrid Components Using the Incremental Hole Drilling Method.” Journal of Composites Science, 143, 2020, doi:10.3390/jcs4030143.
LibreCat | DOI
 
[159]
2020 | Journal Article | LibreCat-ID: 15945
Tinkloh, Steffen Rainer, et al. “A Micromechanical-Based Finite Element Simulation of Process-Induced Residual Stresses in Metal-CFRP-Hybrid Structures.” Composite Structures, vol. 238, 111926, 2020, doi:10.1016/j.compstruct.2020.111926.
LibreCat | DOI
 
[158]
2020 | Conference Paper | LibreCat-ID: 27417
Chalicheemalapalli Jayasankar, Deviprasad, et al. “MANUFACTURING OF HYBRID COMPONENTS BY VARTM-PROCESS USING NEW SEALING TECHNIQUE DEVELOPED.” Hybrid 2020 Materials and Structures, edited by Joachim M Hausmann et al., 2020, pp. 167–72.
LibreCat | Files available
 
[157]
2019 | Report | LibreCat-ID: 21210
Ahlers, Dominik, and Thomas Tröster. Schlussbericht zum Vorhaben “Additive Leichtbaustrukturen für Flugzeugkomponenten” : Verbund: KOBFS - Kostenoptimierter Baukasten für Flügelsysteme. Universität Paderborn, 2019, doi:https://doi.org/10.2314/KXP:1695591887.
LibreCat | DOI
 
[156]
2019 | Conference Paper | LibreCat-ID: 16793
Pfeifer, Florian, et al. “Investigation on Inductive Heating of Sheet Metal for an Industrial Hot Stamping Process.” Proceedings of 7th International Conference on Hot Sheet Metal Forming of High-Performance Steel, 2019, pp. 585–93.
LibreCat
 
[155]
2019 | Conference Paper | LibreCat-ID: 16794
Striewe, Jan André, et al. Energieabsorptions- Und Versagensverhalten Eines Automobilen Seitenschwellers Mit Lokaler Verstärkung Aus Kohlenstofffaserverstärktem Kunststoff Nach Alterung. DGM-Inventum GmbH , 2019.
LibreCat
 
[154]
2019 | Misc | LibreCat-ID: 16825
Ahlers, Dominik, and Thomas Tröster. Performance Parameters and HIP Routes for Additively Manufactured Titanium Alloy Ti6Al4V. EuroPM, 2019.
LibreCat
 
[153]
2019 | Conference Paper | LibreCat-ID: 16827
Camberg, Alan Adam, and Thomas Tröster. “Challenges in Fracture Modeling under Non-Isothermal Forming Conditions Using the Example of a New Forming Process for Aluminum Blanks.” 26. Sächsische Fachtagung Umformtechnik, 2019.
LibreCat
 
[152]
2019 | Conference Paper | LibreCat-ID: 16831
Tinkloh, Steffen Rainer, et al. A Micromechanical Based Finite Element Simulation of Process Induced Residual Stresses in Metal-CFRP-Hybrid Structures. 2019.
LibreCat
 
[151]
2019 | Journal Article | LibreCat-ID: 15875
Camberg, Alan Adam, et al. “Predicting Plasticity and Fracture of Severe Pre-Strained EN AW-5182 by Yld2000 Yield Locus and Hosford-Coulomb Fracture Model in Sheet Forming Applications.” IOP Conference Series: Materials Science and Engineering, vol. 651, 2019, p. 012057, doi:10.1088/1757-899X/651/1/012057.
LibreCat | DOI
 
[150]
2019 | Journal Article | LibreCat-ID: 15950
Akbulut Irmak, Emine Fulya, and Thomas Tröster. “Fracture Prediction of Additively Manufactured AlSi10Mg Materials.” Procedia Structural Integrity, 2019, pp. 190–97, doi:10.1016/j.prostr.2019.12.101.
LibreCat | DOI
 
[149]
2019 | Conference Paper | LibreCat-ID: 15976
Akbulut Irmak, Emine Fulya, et al. Modeling the Energy Absorption Characteristics of Wood Crash Elements. 2019.
LibreCat
 
[148]
2019 | Report | LibreCat-ID: 16029
Marten, Thorsten, and Thomas Tröster. Einsatz neuartiger Stähle und Generierung gradierter Leichtbaustrukturen im Presshärteprozess. Forschungsvereinigung Stahlanwendung e.V. im Stahl Zentrum, P920, Verlag und Vertriebsgesellschaft mbH, 2019.
LibreCat
 
[147]
2019 | Conference Paper | LibreCat-ID: 16030
Triebus, Marcel, et al. Press Hardening Integrated Structuring for Hybrid Components. Verlag Wissenschaftliche Scripten, 2019.
LibreCat
 
[146]
2019 | Book Chapter | LibreCat-ID: 13436
Camberg, Alan Adam, et al. “TAILORED STACKED HYBRIDS – AN OPTIMIZATION-BASED APPROACH IN MATERIAL DESIGN FOR FURTHER IMPROVEMENT IN LIGHTWEIGHT CAR BODY STRUCTURES.” Technologies for Economical and Functional Lightweight Design, 2019, doi:10.1007/978-3-662-58206-0_12.
LibreCat | DOI
 
[145]
2019 | Conference Paper | LibreCat-ID: 16032
Stallmeister, Tim, et al. Self-Sealing Tool Concept for RTM-Processes. 2019.
LibreCat
 
[144]
2019 | Conference Paper | LibreCat-ID: 16033
Stallmeister, Tim, et al. Selbstabdichtendes Werkzeugkonzept für RTM-Prozesse. 2019.
LibreCat
 
[143]
2019 | Conference Paper | LibreCat-ID: 16027
Camberg, Alan Adam, et al. “Investigation of Ductility and Fracture Behavior of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” 5th MATFEM Conference, MATFEM, 2019.
LibreCat
 
[142]
2019 | Book | LibreCat-ID: 16795
Striewe, Jan André, et al. Analyse Und Optimierung Des Korrosions- Und Alterungsverhaltens von Hybriden Strukturen Aus Metallen Und CFK. Europäische Forschungsgesellschaft für Blechverarbeitung, 2019.
LibreCat
 
[141]
2019 | Conference Paper | LibreCat-ID: 16028
Grothe, R., et al. Analyse und Optimierung des Korrosions- und Alterungsverhaltens von hybriden Strukturen aus Metallen und CFK. 2019.
LibreCat
 
[140]
2018 | Conference Abstract | LibreCat-ID: 19868
Camberg, Alan Adam, et al. “Investigation of Ductility and Damage Characteristics of EN AW-5182 H18 at Non-Isothermal Forming Conditions.” Materials Science and Engineering (MSE) Congress 2018, 2018.
LibreCat
 
[139]
2018 | Misc | LibreCat-ID: 6594
Claes, Leander, et al. Additiv Gefertigte, Akustische Diffusor-Strukturen Für Ultraschallanwendungen. 2018.
LibreCat
 
[138]
2018 | Conference Paper | LibreCat-ID: 15960
Weiß-Borkowski, Nathalie, et al. Forming Limit Curves of DP600 Determined in High-Speed Nakajima Tests and Predicted by Two Different Strain-Rate-Sensitive Models. 2018, doi:10.1063/1.5035024.
LibreCat | DOI
 
[137]
2018 | Conference Paper | LibreCat-ID: 16034
Camberg, Alan Adam, and Thomas Tröster. “Optimization-Based Material Design of Tailored Stacked Hybrids for Further Improvement in Lightweight Car Body Structures.” HYBRID - MATERIALS AND STRUCTURES 2018 - PROCEEDINGS, DGM - Deutsche Gesellschaft für Materialkunde e.V., 2018.
LibreCat
 
[136]
2018 | Conference Paper | LibreCat-ID: 16039
Ahlers, Dominik, and Thomas Tröster. Entwicklung einer Prozessroute für die Luftfahrtindustrie mit erhöhter Aufbaurate im Laserstrahlschmelzprozess von Ti6Al4V. 2018.
LibreCat
 
[135]
2018 | Conference Paper | LibreCat-ID: 16040
Wang, Z., and Thomas Tröster. Influences of Interface on the Adhesion and Corrosion Properties of Steel-CFRP Hybrid Structures Manufactured by Vacuum Assisted Resin Transfer Moulding. 2018.
LibreCat
 
[134]
2018 | Conference Paper | LibreCat-ID: 16042 | OA
Triebus, Marcel, et al. “Modelling the Interface of Hybrid Metal-FRP Components Joint by Form Closures.” 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[133]
2018 | Conference Paper | LibreCat-ID: 16043 | OA
Camberg, Alan Adam, et al. “The Influence of Damage Accumulation on Failure Prediction: A Comparative Assessment of *MAT_224 and *MAT_024 + GISSMO for the Application in Non-Isothermal Sheet Metal Forming.” 15. Deutsches LS-Dyna Forum, 2018.
LibreCat | Download (ext.)
 
[132]
2018 | Conference Abstract | LibreCat-ID: 16056
Schweizer, Swetlana, and Thomas Tröster. Holz als Werkstoff im Automobil. 2018.
LibreCat
 
[131]
2018 | Conference Paper | LibreCat-ID: 16057
Wang, Z., and Thomas Tröster. Herstellung hybrider Strukturkomponenten in einem modifizierten VARTM-Prozess. 2018.
LibreCat
 
[130]
2018 | Journal Article | LibreCat-ID: 13439
Camberg, Alan Adam, et al. “Formability Enhancement of EN AW-5182 H18 Aluminum Alloy Sheet Metal Parts in a Flash Forming Process: Testing, Calibration and Evaluation of Fracture Models.” IOP Conference Series: Materials Science and Engineering, 012018, 2018, doi:10.1088/1757-899x/418/1/012018.
LibreCat | DOI
 
[129]
2018 | Conference Paper | LibreCat-ID: 16052
Horwath, Ilona, et al. “FROM EMPOWERMENT TO INNOVATION: INTER- AND TRANSDISCIPLINARY RESEARCH METHODS IN LIGHTWEIGHT ENGINEERING.” INTED2018 Proceedings, 2018, doi:10.21125/inted.2018.1651.
LibreCat | DOI
 
[128]
2018 | Journal Article | LibreCat-ID: 15957
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[127]
2018 | Conference Paper | LibreCat-ID: 16048
Ahlers, Dominik, et al. “Selective Laser Melting of Ti6Al4V with High Build Rates and Following Hot Isostatic Pressing.” Contributed Papers from MS&T17, 2018, doi:10.7449/2018mst/2018/mst_2018_117_124.
LibreCat | DOI
 
[126]
2018 | Conference Paper | LibreCat-ID: 16054
Weiß-Borkowski, Nathalie, et al. “NEW APPROACHES IN LIGHTWEIGHT DESIGN: V-MODEL OF LIGHTWEIGHT DESIGN BY COMPOSITES AS AN APPROACH OF INTER- AND TRANSDISCIPLINARY RESEARCH.” INTED2018 Proceedings, 2018, doi:10.21125/inted.2018.1298.
LibreCat | DOI
 
[125]
2018 | Conference Paper | LibreCat-ID: 16035
Striewe, Jan André, et al. Design and Testing of Co-Cured Bonded CFRP-Steel Hybrids with Nanostructured Interfaces for Interlaminar Fracture Toughness. 2018.
LibreCat
 
[124]
2018 | Conference Paper | LibreCat-ID: 16050
Camberg, Alan Adam, et al. LHYBS – Lightweight Design by Novel Hybrid Materials. 2018.
LibreCat
 
[123]
2018 | Conference Paper | LibreCat-ID: 16055
Zinn, C., et al. Forming and Corrosion Stability of a Laser Pre-Treated Metal Surface-Influence on the Properties of Metal-CFRP Hybrid Structures Made by VARTM. 2018.
LibreCat
 
[122]
2018 | Journal Article | LibreCat-ID: 24104
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[121]
2018 | Journal Article | LibreCat-ID: 41525
Hengsbach, Florian, et al. “Inline Additively Manufactured Functionally Graded Multi-Materials: Microstructural and Mechanical Characterization of 316L Parts with H13 Layers.” Progress in Additive Manufacturing, vol. 3, no. 4, Springer Science and Business Media LLC, 2018, pp. 221–31, doi:10.1007/s40964-018-0044-4.
LibreCat | DOI
 
[120]
2018 | Journal Article | LibreCat-ID: 15958
Zinn, Carolin, et al. “Shear Strength and Failure Behaviour of Laser Nano-Structured and Conventionally Pre-Treated Interfaces in Intrinsically Manufactured CFRP-Steel Hybrids.” Composites Part B: Engineering, 2018, pp. 173–85, doi:10.1016/j.compositesb.2018.05.030.
LibreCat | DOI
 
[119]
2017 | Conference Paper | LibreCat-ID: 6559
Claes, Leander, et al. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic Measurement Applications.” Proceedings of Meetings on Acoustics, 2017, p. 030004, doi:10.1121/2.0000688.
LibreCat | DOI
 
[118]
2017 | Conference Paper | LibreCat-ID: 16791
Dietrich, André, et al. Investigation of Geometrical Discontinuities in Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating. 2017.
LibreCat
 
[117]
2017 | Conference Paper | LibreCat-ID: 16792
Dietrich, André, et al. Effects of Holes in Blanks for Press Hardening Process Due to Induction Heating. 2017.
LibreCat
 
[116]
2017 | Journal Article | LibreCat-ID: 15941
Reuter, Corin, et al. “Experimental and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.” Composite Structures, 2017, pp. 33–44, doi:10.1016/j.compstruct.2017.04.052.
LibreCat | DOI
 
[115]
2017 | Journal Article | LibreCat-ID: 15942
Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures, vol. 117, 2017, pp. 1–9, doi:10.1016/j.tws.2017.03.034.
LibreCat | DOI
 
[114]
2017 | Journal Article | LibreCat-ID: 15944
Striewe, Jan André, et al. “Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.” Thin-Walled Structures, 2017, pp. 501–08, doi:10.1016/j.tws.2017.11.011.
LibreCat | DOI
 
[113]
2017 | Conference Paper | LibreCat-ID: 16059
Weiß-Borkowski, Nathalie, et al. “Forming Limit Curves Determined in High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” Proceedings of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 2017, doi:10.1063/1.5007961.
LibreCat | DOI
 
[112]
2017 | Journal Article | LibreCat-ID: 16062
Schweizer, Swetlana, et al. “Separation of Hybrid Structures for the Reclaim of Their Single Components.” Key Engineering Materials, 2017, pp. 568–75, doi:10.4028/www.scientific.net/kem.742.568.
LibreCat | DOI
 
[111]
2017 | Conference Paper | LibreCat-ID: 16063
Ahlers, Dominik, and Thomas Tröster. Approve of Porostiy for Increasing Process Speed in the Laser Melting Process of Ti6Al4V. 2017.
LibreCat
 
[110]
2017 | Conference Paper | LibreCat-ID: 16065
Kutz, P., et al. Computed Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test. 2017.
LibreCat
 
[109]
2017 | Conference Paper | LibreCat-ID: 16071
Wang, Z., et al. Herstellung und computertomographische Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen. 2017.
LibreCat
 
[108]
2017 | Conference Paper | LibreCat-ID: 16072
Weiß Borkowski, N., et al. Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation by CRACH. 2017.
LibreCat
 
[107]
2017 | Conference Paper | LibreCat-ID: 16073
Weiß Borkowski, N., et al. Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates. 2017.
LibreCat
 
[106]
2017 | Conference Paper | LibreCat-ID: 16074
Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive Fertigung. 2017.
LibreCat
 
[105]
2017 | Conference Paper | LibreCat-ID: 16075
Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der additiven Fertigung. 2017.
LibreCat
 
[104]
2017 | Conference Paper | LibreCat-ID: 16066
Ahlers, Dominik, et al. “Increasing Process Speed in the Laser Melting Process of Ti6Al4V and the Reduction of Pores during Hot Isostatic Pressing.” Proceedings of the 28th Annual InternationalSolid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2017.
LibreCat
 
[103]
2017 | Journal Article | LibreCat-ID: 24108
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[102]
2017 | Journal Article | LibreCat-ID: 41530
Hengsbach, Florian, et al. “Duplex Stainless Steel Fabricated by Selective Laser Melting - Microstructural and Mechanical Properties.” Materials & Design, vol. 133, Elsevier BV, 2017, pp. 136–42, doi:10.1016/j.matdes.2017.07.046.
LibreCat | DOI
 
[101]
2017 | Journal Article | LibreCat-ID: 15961
Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2017, doi:10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[100]
2016 | Journal Article | LibreCat-ID: 15962
Tröster, Thomas, et al. “Manufacturing and Investigation of Steel-CFRP Hybrid Pillar Structures for Automotive Applications by Intrinsic Resin Transfer Moulding Technology.” International Journal of Automotive Composites, vol. 2, 2016, pp. 229–43, doi:10.1504/ijautoc.2016.10005304.
LibreCat | DOI
 
[99]
2016 | Journal Article | LibreCat-ID: 16139
Schweizer, Swetlana, and Thomas Tröster. “Recyclingkonzepte für hybride Strukturen.” Carbon Composites Magazin, no. 2, 2016, p. 23.
LibreCat
 
[98]
2016 | Journal Article | LibreCat-ID: 16146
Grienitz, Volker, et al. “Technikevaluation für die generative Fertigung eines Serien-Radträgers.” ATZ - Automobiltechnische Zeitschrift, 2016, pp. 36–41, doi:10.1007/s35148-016-0090-5.
LibreCat | DOI
 
[97]
2016 | Conference Paper | LibreCat-ID: 16264
Wang, Z., and Thomas Tröster. Parameterstudien an intrinsisch hergestellten Metall-FVK-Hybridstrukturen mittels RTM-Verfahren. 2016.
LibreCat
 
[96]
2016 | Conference Paper | LibreCat-ID: 16266
Striewe, Jan André, et al. Experimentelle Untersuchung und Analyse des Energieabsorptionsverhaltens axial belasteter Faserverbundkunststoffe. 2016.
LibreCat
 
[95]
2016 | Conference Paper | LibreCat-ID: 16267
Striewe, Jan André, et al. Manufacturing and Crashworthiness of Fabric Reinforced Thermoplastic Composites. 2016.
LibreCat
 
[94]
2016 | Conference Paper | LibreCat-ID: 16268
Striewe, Jan André, et al. Innovative Largescale Production Process for Multilayered Sheet-Metal-FRP-Structures. 2016.
LibreCat
 
[93]
2016 | Conference Paper | LibreCat-ID: 16269
Wang, Z., et al. CarS: Carbon Fiber Reinforced Steel for Structural Automotive Applications. 2016.
LibreCat
 
[92]
2016 | Journal Article | LibreCat-ID: 16270
Hickmann, T., et al. “Neue Prototypen-Werkzeugtechnologie für Bipolarplatten und Batteriekomponenten.” Der Stahlformenbauer , no. 5, Technischer Fachverlag Möller, 2016.
LibreCat
 
[91]
2016 | Journal Article | LibreCat-ID: 15963
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, vol. 2, 2016, pp. 272–98, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[90]
2016 | Conference Paper | LibreCat-ID: 16138
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte RTM-Prozess. 2016.
LibreCat
 
[89]
2016 | Conference Paper | LibreCat-ID: 16265
Zinn, C., et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische und korrosive Eigenschaften. 2016.
LibreCat
 
[88]
2016 | Journal Article | LibreCat-ID: 16140
Bobbert, Mathias, et al. “Novel Process Approach for In-Situ Insertion of Functional Elements in RTM-Applications.” Journal of Materials Science Research, 15, 2016, doi:10.5539/jmsr.v6n1p15.
LibreCat | DOI
 
[87]
2016 | Journal Article | LibreCat-ID: 16143
Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive Composites, 244, 2016, doi:10.1504/ijautoc.2016.10005303.
LibreCat | DOI
 
[86]
2016 | Journal Article | LibreCat-ID: 16141
Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal of Automotive Composites, 272, 2016, doi:10.1504/ijautoc.2016.10005305.
LibreCat | DOI
 
[85]
2016 | Journal Article | LibreCat-ID: 16137
Lauter, Christian, et al. “Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology.” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 10, no. 5, World Academy of Science, Engineering and Technology, 2016, pp. 875–80, doi:doi.org/10.5281/zenodo.1124481.
LibreCat | DOI
 
[84]
2015 | Journal Article | LibreCat-ID: 15964
Leuders, Stefan, et al. “Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting.” Metallurgical and Materials Transactions A, 2015, pp. 3816–23, doi:10.1007/s11661-015-2864-x.
LibreCat | DOI
 
[83]
2015 | Conference Paper | LibreCat-ID: 16131
Marten, Thorsten, et al. Partial Hardening of New Press Hardenable Steels. 2015.
LibreCat
 
[82]
2015 | Conference Paper | LibreCat-ID: 16132
Weiß Borkowski, Nathalie, et al. Multi-Axial Material Testing at High Strain Rates in High Speed Cupping Tests. 2015.
LibreCat
 
[81]
2015 | Conference Paper | LibreCat-ID: 16135
Frantz, M., et al. Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK). Verlag Stahleisen GmbH, 2015, pp. 139–44.
LibreCat
 
[80]
2015 | Conference Paper | LibreCat-ID: 16136
Reuter, C., et al. Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna. Verlag Stahleisen GmbH, 2015, pp. 127–32.
LibreCat
 
[79]
2015 | Conference Paper | LibreCat-ID: 16258
Reschetnik, W., et al. Fatigue Life Prediction for Metals Processed by Selective Laser Melting Using Finite Element Analyses. 2015.
LibreCat
 
[78]
2015 | Conference Paper | LibreCat-ID: 16259
Wang, Z., et al. Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding. 2015.
LibreCat
 
[77]
2015 | Conference Paper | LibreCat-ID: 16260
Lauter, C., et al. Methodology for the Product Engineering of Lightweight Structures in Multi-Material Design. 2015.
LibreCat
 
[76]
2015 | Conference Paper | LibreCat-ID: 16261
Leuders, S., et al. Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting and Investment Casting. 2015.
LibreCat
 
[75]
2015 | Conference Paper | LibreCat-ID: 16263
Wingenbach, Nils, and Thomas Tröster. Material Follows Form Follows Function. 2015.
LibreCat
 
[74]
2015 | Conference Paper | LibreCat-ID: 16133
Lauter, C., et al. Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology. 2015.
LibreCat
 
[73]
2015 | Book Chapter | LibreCat-ID: 16134
Abel, P., et al. “Textile Composites in the Automotive Industry.” Fatigue of Textile Composites, 2015, doi:10.1016/b978-1-78242-281-5.00016-x.
LibreCat | DOI
 
[72]
2015 | Conference Paper | LibreCat-ID: 16262
Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten in einem modifizierten RTM-Prozess. 2015.
LibreCat
 
[71]
2015 | Conference Paper | LibreCat-ID: 23061
Lauter, Christian, et al. “Influences of Process Parameters on the Mechanical Properties of Hybrid Sheet Metal-FRP-Composites Manufactured by Prepreg Press Technology.” 20th International Conference on Composite Materials, Copenhagen, 2015.
LibreCat
 
[70]
2014 | Journal Article | LibreCat-ID: 15966
Niendorf, Thomas, et al. “Functionally Graded Alloys Obtained by Additive Manufacturing.” Advanced Engineering Materials, 2014, pp. 857–61, doi:10.1002/adem.201300579.
LibreCat | DOI
 
[69]
2014 | Journal Article | LibreCat-ID: 15967
Riemer, A., et al. “On the Fatigue Crack Growth Behavior in 316L Stainless Steel Manufactured by Selective Laser Melting.” Engineering Fracture Mechanics, 2014, pp. 15–25, doi:10.1016/j.engfracmech.2014.03.008.
LibreCat | DOI
 
[68]
2014 | Conference Paper | LibreCat-ID: 16097
Klein, M., et al. Characterization of the Corrosion Influence on the Fatigue Behavior of Intrinsic CFRP-Steel-Hybrids. 2014, pp. 188–93.
LibreCat
 
[67]
2014 | Conference Paper | LibreCat-ID: 16099
Frantz, M., et al. Efficient Manufacturing of Hybrid Structures Consisting of Steel and CFRP with Using Residual Heat / Effiziente Herstellung von Hybridbauteilen Aus Stahl Und CFK Mithilfe von Restwärmeausnutzung. 2014.
LibreCat
 
[66]
2014 | Conference Paper | LibreCat-ID: 16120
Block, Holger, et al. Crash Simulation of High Strength Automotive Components Using Advanced Failure Models. 2014.
LibreCat
 
[65]
2014 | Journal Article | LibreCat-ID: 16122
Lauter, Christian, et al. “Quasistatic and Crash Tests of Steel-CFRP Hybrid Pillar Structures for Automotive Applications.” International Journal of Automotive Composites, 52, 2014, doi:10.1504/ijautoc.2014.064127.
LibreCat | DOI
 
[64]
2014 | Conference Paper | LibreCat-ID: 16128
Block, Holger, et al. Crash Performance of the New Press Hardenable Steel 15MnB6. 2014.
LibreCat
 
[63]
2014 | Conference Paper | LibreCat-ID: 16129
Reuter, Corin, et al. Numerical Simulation of the Energy Absorption of Fiber-Reinforced Plastics. 2014.
LibreCat
 
[62]
2014 | Conference Paper | LibreCat-ID: 16130
Weiß Borkowski, Nathalie, et al. Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. 2014.
LibreCat
 
[61]
2014 | Conference Paper | LibreCat-ID: 16255
Leuders, S., et al. Selective-Laser-Melting Materials under Cyclic Loading: Influence of Process-Inherent Defects on the Initiation and Propagation of Fatigue Cracks. 2014.
LibreCat
 
[60]
2014 | Conference Paper | LibreCat-ID: 16256
Leuders, S., et al. Evaluation of the Effect of Defects on the Mechanical Performance of Components Manufactured by Selective Laser Melting. 2014.
LibreCat
 
[59]
2014 | Conference Paper | LibreCat-ID: 16257
Leuders, S., et al. On the Mechanical Performance of Structures Manufactured by Selective Laser Melting: Damage Initiation and Propagation. 2014.
LibreCat
 
[58]
2014 | Conference Paper | LibreCat-ID: 16098
Moritzer, Elmar, et al. Study of the Bond Strength of a Combination Consisting of Composite Sheet and Short-Fiber Thermoplastic. 2014, pp. 101–08.
LibreCat
 
[57]
2014 | Journal Article | LibreCat-ID: 16125
Moritzer, Elmar, et al. “Parametereinfluss auf die Verbundfestigkeit einer Organoblech-Kurzfaserthermoplast-Werkstoffkombination.” Joining Plastics , vol. 8, no. 2, 2014, pp. 100–05.
LibreCat
 
[56]
2014 | Journal Article | LibreCat-ID: 15965
Leuders, Stefan, et al. “On the Fatigue Properties of Metals Manufactured by Selective Laser Melting – The Role of Ductility.” Journal of Materials Research, 2014, pp. 1911–19, doi:10.1557/jmr.2014.157.
LibreCat | DOI
 
[55]
2013 | Journal Article | LibreCat-ID: 15968
Niendorf, Thomas, et al. “Highly Anisotropic Steel Processed by Selective Laser Melting.” Metallurgical and Materials Transactions B, 2013, pp. 794–96, doi:10.1007/s11663-013-9875-z.
LibreCat | DOI
 
[54]
2013 | Journal Article | LibreCat-ID: 16016
Riemer, Andre, et al. “Verhalten von lasergeschmolzenen Bauteilen aus der Titan-Aluminium-Legierung TiAl6V4 unter zyklischer Beanspruchung∗.” Materials Testing, 2013, pp. 537–43, doi:10.3139/120.110468.
LibreCat | DOI
 
[53]
2013 | Conference Paper | LibreCat-ID: 16017
Marten, Thorsten, et al. Graded Lightweight Structures Through Hot Forming. 2013.
LibreCat
 
[52]
2013 | Conference Paper | LibreCat-ID: 16018
Lauter, Christian, et al. Influences of Automotive Process Characteristics on Hybrid Structures. 2013.
LibreCat
 
[51]
2013 | Conference Paper | LibreCat-ID: 16019
Siewers, Bernd, et al. Curing of Fibre Reinforced Plastics by Resistance Heating of Sheet Metal in a Hybrid Structure. 2013.
LibreCat
 
[50]
2013 | Conference Paper | LibreCat-ID: 16020
Tröster, Thomas, et al. Crashworthiness of Hybrid Structures. 2013.
LibreCat
 
[49]
2013 | Conference Paper | LibreCat-ID: 16021
Siewers, Bernd, et al. Recycling of Automotive Sheet Metal-Fibre Reinforced Plastic-Hybrid Structures. 2013.
LibreCat
 
[48]
2013 | Conference Paper | LibreCat-ID: 16022
Lauter, Christian, et al. Manufacturing of Hybrid Structures by Prepreg Press Technology. 2013.
LibreCat
 
[47]
2013 | Conference Paper | LibreCat-ID: 16023
Tröster, Thomas, et al. Leichtbau mit Hybridstrukturen im Automobil. 2013.
LibreCat
 
[46]
2013 | Conference Paper | LibreCat-ID: 16024
Leuders, S., et al. On the Fatigue Behavior of TiAl6V4 Manufactured by Selective Laser Melting– Influence of Process Induced Defects. 2013.
LibreCat
 
[45]
2013 | Conference Paper | LibreCat-ID: 16025
Marten, Thorsten, et al. Effizienter Leichtbau durch gradierte Eigenschaften im Presshärteprozess. 2013.
LibreCat
 
[44]
2013 | Conference Paper | LibreCat-ID: 16026
Riemer, A., et al. Bewertung des Einflusses korrosiver Schädigung auf das Ermüdungsverhalten von CFK/Stahl-Hybridverbindungen. 2013.
LibreCat
 
[43]
2013 | Book Chapter | LibreCat-ID: 16096
Lauter, Christian, et al. “Hybrid Structures Consisting of Sheet Metal and Fibre Reinforced Plastics for Structural Automotive Applications.” Advanced Composite Materials for Automotive Applications, 2013, doi:10.1002/9781118535288.ch7.
LibreCat | DOI
 
[42]
2012 | Journal Article | LibreCat-ID: 15981
Tröster, Thomas, et al. “Automobilleichtbau mit innovativen Werkstoffen und Prozessen.” Forschungsforum Paderborn, vol. 15, no. 15/2012, Universität Paderborn, 2012, pp. 30–38.
LibreCat
 
[41]
2012 | Journal Article | LibreCat-ID: 15983
Lauter, Christian, et al. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.” Lightweight Design, 2012, pp. 53–58, doi:10.1365/s35725-012-0079-2.
LibreCat | DOI
 
[40]
2012 | Conference Paper | LibreCat-ID: 15985
Reuter, Corin, et al. Simulation and Testing of Hybrid Structures Consisting of Press-Hardened Steel and CFRP. 2012.
LibreCat
 
[39]
2012 | Conference Paper | LibreCat-ID: 15987
Lauter, Christian, et al. Crash Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements. 2012.
LibreCat
 
[38]
2012 | Conference Paper | LibreCat-ID: 15988
Lauter, Christian, et al. Joining Technologies for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics. 2012.
LibreCat
 
[37]
2012 | Journal Article | LibreCat-ID: 15989
Ickert, Leif, et al. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.” FAT-Schriftenreihe 244, no. 244, Forschungsvereinigung Automobiltechnik e.V., 2012.
LibreCat
 
[36]
2012 | Conference Paper | LibreCat-ID: 16004
Lauter, Christian, et al. Crash Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP Reinforcements. 2012.
LibreCat
 
[35]
2012 | Conference Paper | LibreCat-ID: 16007
Thöne, M., et al. Influence of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V. 2012.
LibreCat
 
[34]
2012 | Journal Article | LibreCat-ID: 16008
Riemer, A., et al. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, Deutscher Verband für Materialforschung und -prüfung e.V., 2012.
LibreCat
 
[33]
2012 | Conference Paper | LibreCat-ID: 16009
Leuders, S., et al. Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. 2012.
LibreCat
 
[32]
2012 | Report | LibreCat-ID: 16012
Tröster, Thomas, et al. P 850 – Wirbelbetterwärmung von Platinen für das Presshärten. Abschlussberichte Forschungsvereinigung Stahlanwendung e.V., Verlag und Vertriebsgesellschaft mbH, 2012.
LibreCat
 
[31]
2012 | Journal Article | LibreCat-ID: 16015
Leuders, S., et al. “On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance.” International Journal of Fatigue, 2012, pp. 300–07, doi:10.1016/j.ijfatigue.2012.11.011.
LibreCat | DOI
 
[30]
2012 | Journal Article | LibreCat-ID: 15984
Schmidt, Hans Christian, et al. “Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements.” Key Engineering Materials, 2012, pp. 295–300, doi:10.4028/www.scientific.net/kem.504-506.295.
LibreCat | DOI
 
[29]
2012 | Conference Paper | LibreCat-ID: 15986
Gorny, B., et al. Simulation and Manufacturing of Deep Drawn Parts Reinforced by Carbon Fibre Prepregs. 2012.
LibreCat
 
[28]
2012 | Journal Article | LibreCat-ID: 16010
Lauter, Christian, et al. “Methodik für die Produktentstehung hybrider Leichtbaustrukturen.” Lightweight Design, vol. 5, 2012, pp. 50–56, doi:10.1365/s35725-013-0137-4.
LibreCat | DOI
 
[27]
2011 | Journal Article | LibreCat-ID: 15969
Lauter, Christian, et al. “Multimaterialsysteme höchstfest verbunden.” Adhäsion – Kleben und Dichten, vol. 3/2011, Springer Vieweg, 2011, pp. 39–43.
LibreCat
 
[26]
2011 | Conference Paper | LibreCat-ID: 15971
Frantz, Meike, et al. Mechatronisches System zur Bestimmung der Restlebensdauer von Faserverbund-Leichtbaustrukturen am Beispiel einer Lauffeder. 2011.
LibreCat
 
[25]
2011 | Conference Paper | LibreCat-ID: 15972
Thomas, D., et al. Herstellung von belastungsgerechten Strukturbauteilen mittels partieller induktiver Härtung. 2011.
LibreCat
 
[24]
2011 | Journal Article | LibreCat-ID: 15974
Marten, Thorsten, et al. “Automobilleichtbau durch höchstfeste Multimaterialsysteme.” Ingenieurspiegel, vol. 2/2011, Public Verlagsgesellschaft und Anzeigenagentur, 2011, pp. 67–69.
LibreCat
 
[23]
2011 | Journal Article | LibreCat-ID: 15975
Lauter, Christian, et al. “Belastungsangepasste Strukturbauteile für Automobile aus höchstfesten Werkstoffen und Hybridwerkstoffen.” Werkstoffe in der Fertigung – Die Fachzeitschrift für technische Führungskräfte, vol. 2, HW-Verlag, 2011, pp. 6–7.
LibreCat
 
[22]
2011 | Journal Article | LibreCat-ID: 15980
Lauter, Christian, et al. “Hybrid Structures for Tailored Structural Automotive Components.” JEC Composites Magazine, vol. 69, JEC Composites, 2011, pp. 35–37.
LibreCat
 
[21]
2011 | Conference Paper | LibreCat-ID: 15990
Thomas, D., et al. Production of Load-Adapted Lightweight Designs by Partial Hardening. 2011.
LibreCat
 
[20]
2011 | Journal Article | LibreCat-ID: 15992
Gorny, B., et al. “In Situ Characterization of the Deformation and Failure Behavior of Non-Stochastic Porous Structures Processed by Selective Laser Melting.” Materials Science and Engineering: A, vol. 528, no. 27, 2011, pp. 7962–67, doi:10.1016/j.msea.2011.07.026.
LibreCat | DOI
 
[19]
2011 | Journal Article | LibreCat-ID: 15993
Lauter, Christian, et al. “Großserientaugliche Herstellung höchstfester Hybridwerkstoffe durch Prepregpressen.” Lightweight Design, vol. 4, 2011, pp. 48–54.
LibreCat
 
[18]
2011 | Conference Paper | LibreCat-ID: 15996
Frantz, Meike, et al. Advanced Manufacturing Technologies for Automotive Structures in Multi-Material Design Consisting of High-Strength Steels and CFRP. 2011.
LibreCat
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: MLA

Export / Embed