443 Publications
2024 | Journal Article | LibreCat-ID: 51116
Uhe, Benedikt, et al. “Corrosion Behaviour of Self-Piercing Riveted Joints with Uncoated Rivets in High Nitrogen Steel.” Production Engineering, 2024, doi:10.1007/s11740-024-01262-6.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 52201
Han, Daxin, et al. “Single-Step Self-Punching Lockbolt Process for Aluminum Sheets without Pre-Hole.” Journal of Manufacturing Processes, vol. 116, Elsevier BV, 2024, pp. 92–108, doi:10.1016/j.jmapro.2024.02.043.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 52213
Beule, Felix, et al. “Methodenentwicklung Zur Rechnerischen Auslegung Geklebter Stahlverbindungen Unter Alterungsbeanspruchung Im Stahl- Und Anlagenbau.” 24. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52211
Beule, Felix, et al. “Klebstoffmodell - Parameteridentifikation, Verifikation Und Validierung Für Den Lastfall Crash.” DECHEMA-Workshop Für Klebstoffanwender: Simulation von Klebverbindungen, edited by DECHEMA, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52214
Beule, Felix, et al. Methodenentwicklung Zur Simulation von Hyperelastischen Klebverbindungen Unter Crashbelastung. Edited by DECHEMA, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52215
Carillo Beber, Vinicius, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52212
Tews, Karina, et al. “Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden.” 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52216
Tews, Karina, et al. Mechanisches Verhalten: Charakterisierung von Klebstoffen. 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52359
Chudalla, Nick, et al. “Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes.” 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 52403
Al Trjman, Mohamad, et al. Methodenentwicklung Zur Simulation Des Viscous Fingering in Klebverbindungen von Stahlintensiven Mischbaustrukturen. 2024.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 52537
Gröger, Benjamin, et al. “Experimentelle Und Numerische Analyse Des Fließverhaltens von Hochviskosen Wärmeleitstoffen Im Fertigungsprozess.” 24. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 50726
Schuster, Lilia, et al. “Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints.” Steel Research International, Wiley, 2024, doi:10.1002/srin.202300530.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 36839
Neumann, Stefan, et al. Mechanically Joined Extrusion Profiles for Battery Trays.
LibreCat
2023 | Journal Article | LibreCat-ID: 42636
Heyser, Per, et al. “Development of a Numerical Simulation Model for Self-Piercing Riveting of Additive Manufactured AlSi10Mg.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072311582, SAGE Publications, 2023, doi:10.1177/14644207231158213.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 42643
Chudalla, Nick, et al. Systematisierung Einer Rechnergestützten Auswertemethode Zur Versagensanalyse Geklebter Verbindungen. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 42666
Schmolke, Tobias, et al. Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 42667
Schmolke, Tobias, and Gerson Meschut. Leak Tightness of Bonded Joints in Battery Housings Under Mechanical and Corrosive Loads. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 42763
Nagel, Christof, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 42766
Tews, Karina, et al. Experimental Investigation of the Fatigue Behavior and Calculation of the Service Life of Adhesively Bonded Joints. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 42872
Göddecke, Johannes, et al. “Experimental and Numerical Investigation of the Damping Properties of Adhesively Bonded Tubular Steel Joints.” The Journal of Adhesion, Informa UK Limited, 2023, pp. 1–31, doi:10.1080/00218464.2023.2178909.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44182
Schmelzle, Lars, et al. “Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung.” 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 43130
Schmolke, Tobias, et al. “Investigation of the Leak Tightness of Structural Adhesive Joints for Use in Battery Housings Considering Mechanical and Corrosive Loads.” The Journal of Adhesion, Taylor & Francis, 2023, doi:10.1080/00218464.2023.2195556.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44181
Beule, Felix, et al. “Methodenentwicklung Zur Simulation von Hyperelastischen Klebverbindungen Unter Crashbelastung.” 23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44183
Kowatz, Jannik, et al. “Weiterentwicklung der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von serienrelevanten Einflussfaktoren.” 23. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 39057
Wippermann, Jan, et al. “Thermal Influence of Resistance Spot Welding on a Nearby Overmolded Thermoplastic–Metal Joint.” Welding in the World, Springer Science and Business Media LLC, 2023, doi:10.1007/s40194-023-01465-y.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44232
Wippermann, Jan, et al. “Influence of Plasma Coating Pretreatment on the Adhesion of Thermoplastics to Metals.” Tagungsband Münchener Leichtbauseminar 2022, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 35536
Kowatz, Jannik, et al. “Optimization of Inductive Fast-Curing of Epoxy Adhesive by Model-Based Kinetics.” International Journal of Adhesion and Adhesives, vol. 124, Elsevier, 2023, doi:https://doi.org/10.1016/j.ijadhadh.2023.103392.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44228
Salten, Alexander Heinrich Johannes, et al. Simulation Des „viscous Fingering“ Effektes in Klebverbindungen. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44227
Al Trjman, Mohamad, et al. Methodenentwicklung Zur Simulation Des Viscous Fingering in Klebverbindungen von Stahlintensiven Mischbaustrukturen. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 45557
Rossel, Moritz Sebastian, and Gerson Meschut. “Prozesskettensimulation für das Clinchen mit beweglicher Matrize.” BLECHE+ROHRE+PROFILE, vol. 02/2023, Meisenbach Verlag , 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 45663
Schmolke, Tobias, et al. “On Welding of High-Strength Steels Using Laser Beam Welding and Resistance Spot Weld Bonding with Emphasis on Seam Leak Tightness .” Journal of Manufacturing and Materials Processing, vol. 7, no. 3, MDPI, 2023, doi:10.3390/jmmp7030116.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 45877
Brunner-Schwer, Christian, et al. A Life Cycle Assessment of Joining Processes in the Automotive Industry, Illustrated by the Example of an EV Battery Case. 2023.
LibreCat
2023 | Book | LibreCat-ID: 46812
Rossel, Moritz Sebastian, and Gerson Meschut. Methodenentwicklung zur verbesserten Prognosegüte beim Clinchen mit beweglicher Matrize in der numerischen Fügeprozesssimulation. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46866
Troschitz, Juliane, et al. “Clinching and Resistance Spot Welding of Thermoplastic Composites with Metals Using Inserts as Joining Interfaces.” Proceedings of the 23rd International Conference on Composite Materials (ICCM23), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48585
Uhe, Benedikt, et al. “Controlled Rivet Deformation During Self-Piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material.” Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity., edited by Katia Mocellin et al., vol. 3, Springer, 2023, pp. 64–71, doi:10.1007/978-3-031-41341-4_8.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48584
Uhe, Benedikt, et al. “Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets.” Journal of Manufacturing and Materials Processing, vol. 7, no. 6, 193, MDPI AG, 2023, doi:10.3390/jmmp7060193.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46295
Bartley, Aurélie, et al. “Low Temperature Debonding of Toughened Structural Adhesive Joints: A New Approach to Repairs in the Automotive Industry.” International Journal of Adhesion and Adhesives, vol. 126, 2023, doi:https://doi.org/10.1016/j.ijadhadh.2023.103486.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 50178
Beule, Felix, et al. “Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, DVS Media GmbH, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50207
Tews, Karina, et al. “Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50275
Schmolke, Tobias, and Gerson Meschut. “Untersuchung Der Dichtheitseigenschaften Hybridgefügter Mischbauverbindungen Für Den Einsatz in Batterieghäusen Für Elektrofahrzeuge.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50276
Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung Der Dämpfungseigenschaften Geklebter Strukturen Unter Dynamischer Beanspruchung.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50274
Chudalla, Nick, and Gerson Meschut. “Effizientes Lösen von Klebverbindungen in Der Fahrzeuginstandsetzung.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 36840
Neumann, Stefan, et al. Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches. doi:10.1016/j.procir.2023.09.019.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 50727
Olfert, Viktoria, et al. Methodenentwicklung Zur Prognose Des Crashverhaltens von Widerstandspunktgeschweißten 3-Stahlblechverbindungen. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 50551
Haak, Viktor, et al. “Einfluss von Prozessparametern auf Dreiblech-Hybrid-Mischverbindungen beim zweistufigen Widerstandselementschweißen.” 13. Fügetechnisches Gemeinschaftskolloquium, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 50547
Haak, Viktor, et al. “Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise.” 25. DVS-Sondertagung Widerstandsschweißen, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 43090
Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in Clinching Process Chain Simulation.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-33.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching Process Simulations.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-34.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 52454
Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-17 .
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 50060
Gilich, Julian, et al. “Influences on the Flow Behavior of Highly Viscous Thermal Interface Materials in the Joining Process.” 14th European Adhesion Conference (EURADH) & 7th World Congress on Adhesion and Related Phenomena (WCARP), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48082 | 
Yang, Keke, et al. “The Identification of a New Liquid Metal Embrittlement (LME) Type in Resistance Spot Welding of Advanced High-Strength Steels on Reduced Flange Widths.” Metals (Special Issue Embrittlement Phenomena in Steel Metallurgy), vol. 13, no. 10, MDPI, 2023, doi:10.3390/met13101754.
LibreCat
| Files available
| DOI
2023 | Journal Article | LibreCat-ID: 47042
Göddecke, Johannes, et al. “Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau.” Stahlbau, vol. 92, no. 8, Wiley, 2023, pp. 508–19, doi:10.1002/stab.202300031.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46164
Chudalla, Nick, et al. “Rechnergestützte Versagensanalyse Geklebter Verbindungen.” Adhäsion KLEBEN & DICHTEN, no. 6, 2023, doi:https://doi.org/10.1007/s35145-023-1198-x .
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 52614
Bielak, Christian Roman, et al. “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_15.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 52688
Bähr, Philipp, et al. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau.” 13. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 52689
Striewe, Marius, et al. “Methode zur Simulation des temperaturabhängigen Crashverhaltens von strukturellen Klebverbindungen.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44220
Uhe, Benedikt, et al. Approach for a Sustainable Process Chain in Manufacturing of Fasteners for Mechanical Joining. Materials Research Proceedings, 2023, doi:10.21741/9781644902417-49.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52831 |
Butzhammer, Lorenz, et al. “Dynamic Conformity Assessment for Joining Force Monitoring Using Bayes Filters.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-48.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 52821 |
Wituschek, Simon, et al. “Combination of Versatile Self-Piercing Riveting Processes.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-16.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 29852
Beule, Felix, et al. “Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29855
Carillo Beber, Vinicius, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29344
Kowatz, Jannik, et al. “Weiterentwicklung der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von serienrelevanten Einflussfaktoren.” 22. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30003
Chudalla, Nick, et al. “Analyse Des Versagensverhaltens Geklebter Stahl-Verbindungen Beim Werkstoffschonenden Entfügen in Der Karosserieinstandsetzung.” 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.
LibreCat
2022 | Book | LibreCat-ID: 30102
Rossel, Moritz Sebastian, and Gerson Meschut. Methodenentwicklung für die Simulation mechanischer Fügeprozesse mit besonderer Berücksichtigung fügespezifischer Reibverhältnisse. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 30222
Striewe, Marius, et al. “Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 27186
Otroshi, Mortaza, and Gerson Meschut. “Influence of Cutting Clearance and Punch Geometry on the Stress State in Small Punch Test .” Engineering Failure Analysis, vol. 136, no. c, Elsevier, 2022, doi:10.1016/j.engfailanal.2022.106183.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30004
Chudalla, Nick, et al. “Systematisierung Einer Rechnergestützten Auswertemethode Zur Versagensanalyse Geklebter Verbindungen .” 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30911
Vorderbrüggen, Julian, et al. “Development of a Rivet Geometry for Solid Self-Piercing Riveting of Thermally Loaded CFRP-Metal Joints in Automotive Construction.” Composite Structures, vol. 291, 115583, Elsevier BV, 2022, doi:10.1016/j.compstruct.2022.115583.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30904
Heyser, Per, et al. “Consideration of the Manufacturing History of Sheet Metal Components for the Adaptation of a Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210775, SAGE Publications, 2022, doi:10.1177/14644207221077560.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30915
Chudalla, Nick, et al. “Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte.” adhäsion KLEBEN & DICHTEN, vol. 66, no. 4, Springer Science and Business Media LLC, 2022, pp. 34–37, doi:10.1007/s35145-022-0576-0.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 32155
Beule, Felix, et al. “Influence of Curing-Induced Pre-Deformations on the Mechanical Properties of Adhesively Bonded Joints in Steel-Intensive Mixed-Material Structures.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 32279
Schmolke, Tobias, and Gerson Meschut. “Investigation of Leak Tightness for Bonded Steel Joints Induced by Mechanical and Corrosive Load for Use in Battery Housings.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32329
Chudalla, Nick, et al. Disjoining and Repair Strategies of Structural Joints in Automotive Lightweight Structures. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32388
Rossel, Moritz Sebastian, and Gerson Meschut. “Method Development for Increasing the Prediction Quality of Mechanical Joining Process Simulations by Friction Modeling Based on Local Joining Process Parameters.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34152
Otroshi, Mortaza, and Gerson Meschut. Methodenentwicklung zur Verbesserung der Schädigungsmodellierung in der numerischen 3D-Belastungssimulation mechanischer Fügeverfahren unter Berücksichtigung der fügeinduzierten Vorbeanspruchung. Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 34153
Otroshi, Mortaza, and Gerson Meschut. Schädigungsmodellierung von Hilfsfügeelementen beim mechanischen Fügen von Stahlwerkstoffen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34213
Ewenz, L., et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 34811
Wippermann, Jan, et al. “Thermal Influence of Resistance Spot Welding on Nearby Overmoulded Plastic Metal Joints.” IIW2022, Annual Assembly, Commission III, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 34810
Wippermann, Jan, et al. “Flexible Teilautomatisierung Des Robotergestützten Mechanischen Fügens.” 12. Gemeinsames Kolloquium Zur Mechanischen Fügetechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 29296
Schmolke, Tobias, et al. “Weight-Optimized Battery Housings for Volume Vehicles.” ATZ Worldwide, vol. 124, no. 1, 2022, pp. 66–71, doi:https://doi.org/10.1007/s38311-021-0766-7.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 29342
Sander, Sascha, et al. “Methodenentwicklung zur rechnerischen Auslegung geklebter Stahlverbindungen unter Alterungsbeanspruchung im Stahl- und Anlagenbau .” 22. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
LibreCat
2022 | Journal Article | LibreCat-ID: 29295
Schmolke, Tobias, et al. “Gewichtsoptimierte Batteriegehäuse für Volumenfahrzeuge.” ATZ - Automobiltechnische Zeitschrift, vol. 124, no. 1, 2022, pp. 80–85, doi:https://doi.org/10.1007/s35148-021-0785-0.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 31150
Heyser, Per, et al. “Metamodellbasierte Prozesskette - Umformen-Schneiden-Spannen-Fügen.” Pressen, Systeme, Prozesse der Zukunft Effizienz + Digitalisierung, edited by Europäische Forschungsgesellschaft für Blechverarbeitung, vol. T 50, Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 31149
Meschut, Gerson, et al. Konzeption einer adaptiven Prozesskette für das mechanische Fügen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 31151
Heyser, Per, et al. “Smart Process Chain – Data Analysis in Sheet Metal Processing for Joinability Prediction.” SMART PRODUCTION 2022: DIGITALIZING AUTOMOTIVE MANUFACTURING, Automotive Circle, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 31540
Çavdar, Serkan, and Gerson Meschut. “Stress-Based Fatigue Lifetime Prediction of Adhesively Bonded Joints with Hyperelastic Deformation Behavior.” 45th Annual Meeting of The Adhesion Society, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 30123
Otroshi, Mortaza, and Gerson Meschut. Investigation of the Three-Dimensional Stress State during Loading of Self-Piercing Riveted Joints.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33561
Tews, Karina, et al. Experimentelle Untersuchung des Ermüdungsverhaltens und Berechnung der Lebensdauer von Stahlklebverbindungen bei multiaxialer Belastung. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 35531
Chudalla, Nick, et al. Efficient Debonding of Adhesively Bonded Joints in Car Body Repair. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 35947
Olfert, Viktoria, et al. Development of a Crash Behaviour Prediction Method for Resistance Spot Welded 3-Steel Sheet Joints. SCT, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32413
Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31330
Beule, Felix, et al. “Directional Dependence of the Mechanical Properties of Structural Adhesive Joints with Curing-Induced Pre-Deformations.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 095440702211001, SAGE Publications, 2022, doi:10.1177/09544070221100130.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33002
Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke, Max, et al. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_52.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34572
Böhnke, Max, et al. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Journals, 2022, doi:10.1177/14644207221145886.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34459
Schmelzle, Lars, et al. “Testing, Modelling, and Parameter Identification for Adhesively Bonded Joints under the Influence of Temperature.” Journal of Adhesion Science and Technology, 2022, doi:10.1080/01694243.2022.2125714.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 20446
Neumann, Stefan, et al. Robotergestütztes manuelles mechanisches Fügen – RoboterFügen.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29853
Tews, Karina, et al. “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze .” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32392
Duffe, Tobias, et al. “Global Energy Release Rate of Small Penny-Shaped Cracks in Hyperelastic Materials under General Stress Conditions.” Theoretical and Applied Fracture Mechanics, 2022, doi:10.1016/j.tafmec.2022.103461.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 33088
Duffe, Tobias, et al. “Fracture Mechanical Concept to Predict Crack Nucleation in Elastic Adhesive Joints.” ECF23, European Conference on Fracture 2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33495
Duffe, Tobias, et al. “Numerische Lebensdauerprognose von hyperelastischen Klebverbindungen mit einem bruchmechanischen Ansatz.” Fachzeitschrift für Schweißen und verwandte Verfahren, vol. 74, no. 9, DVS, 2022, pp. 570–76.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30153
Schmolke, Tobias, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 44199
Chudalla, Nick, et al. Analyse des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung. P 1396, Forschungsvereinigung Stahlanwendung e. V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 44209
Schmolke, Tobias, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur . P1399 ed., Forschungsvereinigung Stahlanwendung e. V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 44213
Göddecke, Johannes, et al. Experimentelle und numerische Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung. Forschungsvereinigung Stahlanwendung e.V., 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34216
Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 42874
Göddecke, Johannes, et al. Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34241
Kappe, Fabian, et al. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01151-w.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl, Christoph, et al. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01117-y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30884
Rossel, Moritz Sebastian, and Gerson Meschut. “Investigation of the Friction Conditions of Self-Pierce Rivets by Means of a Compression-Torsion Tribometer.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01126-x.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34275
Kappe, Fabian, et al. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.” Materials Design and Applications IV, Springer International Publishing, 2022, doi:10.1007/978-3-031-18130-6_10.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29858
Kappe, Fabian, et al. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi:10.1177/14644207211070992.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29857
Kappe, Fabian, et al. “Determining the Properties of Multi‑range Semi‑tubular Self‑piercing Riveted Joints.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01105-2.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34210
Bielak, Christian Roman, et al. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_15.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36838
Neumann, Stefan, et al. MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30736
Rossel, Moritz Sebastian, and Gerson Meschut. “Increasing the Accuracy of Clinching Process Simulations by Modeling the Friction as a Function of Local Joining Process Parameters.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210742, SAGE Publications, 2022, doi:10.1177/14644207221074290.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 28766
Sander, Sascha, et al. “Methodology for the Systematic Investigation of the Hygrothermal-Mechanical Behavior of a Structural Epoxy Adhesive.” International Journal of Adhesion and Adhesives, 103072, Elsevier, 2022, doi:10.1016/j.ijadhadh.2021.103072.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30847
Kuball, Clara-Maria, et al. “Process-Adapted Temperature Application within a Two-Stage Rivet Forming Process for High Nitrogen Steel.” Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2022, pp. 1–17, doi:10.1177/14644207211068693.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 44265
Uhe, Benedikt, and Gerson Meschut. Lösungsstrategien Für Das Halbhohlstanznieten von Höchstfesten Und Ultrahöchstfesten Stählen Mit Aluminiumwerkstoffen. Edited by FOSTA, EFB, DVS, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30962
Bielak, Christian Roman, et al. “Numerical Investigation of a Friction Test to Determine the Friction Coefficients for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30963
Ewenz, Lars, et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34069
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34068
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29951 |
Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 44269
Tittmann, Karsten, et al. “Service Strength Analysis Method for Adhesively Bonded Hybrid Structures under Multiaxial Loading.” Proceedings of the 20th European Conference on Composite Materials, edited by Ecole Polytechnique Fédérale de Lausanne (EPFL), vol. 2, 2022, pp. 730–39.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 29856
Jamei, Said, et al. “DigiBody - Digitale Prozesskette zur Abbildung und Optimierung der Fügetechnik im Rohbau .” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 42239
Klöppel, Thomas, et al. “A New Viscoelastic-Viscoplastic Constitutive Formulation in LS-DYNA to Model Adhesives during the Complete Manufacturing-Crashworthiness Process Chain.” 4a-Technologietage 2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30951
Schmolke, Tobias, et al. “Development of a Test Method for Investigating the Leak Tightness of Hybrid Joined Battery Housing Connections.” International Journal of Adhesion and Adhesives, vol. 117, 103171, Elsevier BV, 2022, doi:10.1016/j.ijadhadh.2022.103171.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30394
Hecht, Matthias, et al. “Fatigue Strength of Adhesively Butt-Bonded Hollow Cylinders under Multiaxial Loading with Constant and Variable Amplitudes.” Procedia Structural Integrity, vol. 38, Elsevier BV, 2022, pp. 251–59, doi:10.1016/j.prostr.2022.03.026.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 36332 |
Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52613
Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding Society, 2022, pp. 197–207, doi:10.29391/2022.101.015.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52615
Böhne, Christoph, and Gerson Meschut. “Reduction of Flange Widths in Resistance Spot Welding by Application of Eccentric Electrode Cap Geometries.” Welding and Cutting, vol. 3, 2022, pp. 208–12, doi:10.53192/WAC202203208 .
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32283
Schmolke, Tobias, et al. “Untersuchung von Klebverbindungen für Batteriegehäuse.” adhäsion KLEBEN & DICHTEN , vol. 66, Springer Nature, 2022, pp. 40–43, doi:https://doi.org/10.1007/s35145-022-0596-9.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 52687
Bähr, Philipp, et al. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau.” 12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.
LibreCat
2021 | Journal Article | LibreCat-ID: 25104
Göddecke, Johannes, et al. “Dämpfungseigenschaften geklebter Verbindungen - Potenzialanalyse und Klebstoffcharakterisierung.” adhäsion KLEBEN & DICHTEN, Springer Nature, 2021, pp. 14–23, doi:https://doi.org/10.1007/s35145-021-0520-8.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 28443
Rossel, Moritz Sebastian, and Gerson Meschut. “Steigerung der Prognosegüte mechanischer Fügeprozesssimulationen durch den Einsatz einer fügespezifischen Reibmodellierung basierend auf einer experimentellen Parametrisierung.” 11. Fügetechnisches Gemeinschaftskolloquium, edited by FOSTA, EFB, DVS, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 28448 |
Droß, M., et al. “Fiber Response to Pin Penetration in Dry Woven Fabric Using Numerical Analysis.” Journal of Advanced Joining Processes, 100083, 2021, doi:10.1016/j.jajp.2021.100083.
LibreCat
| DOI
| Download (ext.)
2021 | Book | LibreCat-ID: 26649
Han, Daxin, and Gerson Meschut. Mechanisches Fügen von FKV-FKV-Verbindungen. 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 27199
Aßmuth, Verena, and Gerson Meschut. “Effect of Low-Profile Additives on the Durability of Adhesively Bonded Sheet Moulding Compound (SMC).” International Journal of Adhesion and Adhesives, vol. 112, 103036, Elsevier, 2021, doi:10.1016/j.ijadhadh.2021.103036.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 27490
Schmolke, Tobias, and Gerson Meschut. “Konzeptentwicklung für ein Stahlbatteriegehäuse.” stahl., vol. 3-4 / 2021, Vulkan-Verlag GmbH, 2021, pp. 37–39.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 27702
Helbig, Martin, et al. “Modeling of Adhesives in Crash Simulation under Consideration of Manufacturing Processes.” Vortrag in: Automotive CAE Grand Challange, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 27703
Helbig, Martin, et al. “DigiBody - Optimizing of Joining Technology.” Vortrag in: 13th European LS-DYNA Conference, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21280
Masendorf, Lukas, et al. Simulationsbasierte Lebensdauerabschätzung einer stanzgenieteten Fügeverbindung unter zyklischer Belastung. 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21431
Chudalla, Nick, et al. “Analyse Des Versagensverhaltens Geklebter Stahl Verbindungen Beim Werkstoffschonenden Entfügen in Der Karosserieinstandsetzung.” 21. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 20302
Günter, Heinrich, and Gerson Meschut. “Joining of Ultra-High-Strength Steels Using Resistance Element Welding on Conventional Resistance Spot Welding Guns.” Welding in the World, 2021, doi:https://doi.org/10.1007/s40194-021-01122-2.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20303
Günter, Heinrich, et al. “Joining of Press-Hardened Profiles for the Mixed-Intensive Lightweight Structural Design in Electric Vehicles.” Joining in Car Body Engineering 2021, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 20641
Aßmuth, Verena, et al. “Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile.” 10. Doktorandenseminar Klebtechnik, vol. 369, DVS Media GmbH.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22225
Ivanjko, Martin, et al. Development of an Adaptive, Sensor-Based FDS-Robot-System. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22260
Schmolke, Tobias, and Gerson Meschut. Untersuchung der Dichtheitseigenschaften hybridgefügter Mischbauverbindungen für den Einsatz in Batteriegehäusen für Elektrofahrzeuge. Edited by DVS.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 22275
Böhne, Christoph, et al. “Reduzierung der Flanschbreiten beim Widerstandspunktschweißen durch Einsatz exzentrischer Elektrodenkappengeometrien.” Schweißen und Schneiden, vol. 73, no. 1–2, 2021, pp. 26–31.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22276
Böhne, Christoph, et al. Practical Methods for Avoidance of Liquid Metal Embrittlement in Resistance Spot Welds of Advanced High Strength Steels. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22277
Böhne, Christoph, et al. Application-Oriented Avoidance of Liquid Metal Embrittlement during Resistance Spot Welding of Zinc-Coated Advanced High Strenght Steels. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22281
Rotzsche, Dirk, et al. “Joining of Press-Hardened Profiles for the Mixed-Intensive Lightweight Structural Design in Electric Vehicles.” Joining in Car Body Engineering 2021, 2021.
LibreCat
2021 | Report | LibreCat-ID: 22774
Schmolke, Tobias, et al. Entwicklung einer gewichtsoptimierten Batteriegehäusestruktur für Volumenfahrzeuge. Forschungsvereinigung Automobiltechnik (FAT) , 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21679
Han, Daxin, et al. “A Method for Three-Dimensional Modelling of the Shear-Clinching Process.” ESAFORM 2021, 2021, doi:10.25518/esaform21.1948.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 21716
Schmolke, Tobias, et al. Development of a Leak Test Method for the Joining Technology of Functionally Integrated Lightweight Battery Housings for Electric Vehicles. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21717
Schmolke, Tobias, et al. Entwicklung Einer Methode Zur Bewertung Einer Stahlintensiven Mischbau-Klebverbindung Eines Batteriegehäuses Gegenüber Mechanischer Und Medialer Belastung Und Berücksichtigung Der Interphasenstruktur. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21718
Fischer, Elena, et al. Auslegungsmethode Für Klebverbindungen Mit KTL-Beschichteten Fügeteilen Und Polymeren, Faserverstärkten Werkstoffen – Kleben Auf KTL. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V, 2021.
LibreCat
2021 | Book | LibreCat-ID: 21800
Sander, Sascha, et al. Intrinsische Hybridverbunde für Leichtbautragstrukturen. Springer Vieweg, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21823
Han, Daxin, et al. “Mechanical Joining of Glass Fibre Reinforced Polymer (GFRP) through an Innovative Solid Self-Piercing Rivet.” Journal of Materials Processing Technology, 117182, 2021, doi:10.1016/j.jmatprotec.2021.117182.
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 21560
Beule, Felix, et al. “Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen.” 21. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 20807 |
Bielak, Christian Roman, et al. Further Development of a Numerical Method for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains. doi:10.25518/esaform21.4298.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 25476 |
Otroshi, Mortaza, et al. “The Influence of Manufacturing Processes and Optical Measurement Methods on the Damage Behavior of HX340LAD Micro-Alloyed Steels.” Journal of Manufacturing Engineering, vol. 16, no. 3, 2021, pp. 70–76, doi:https://doi.org/10.37255/jme.v16i3pp070-076.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 21810
Otroshi, Mortaza, et al. “Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components.” Key Engineering Materials, vol. 883, Trans Tech Publications Ltd, 2021, pp. 35–40, doi:https://doi.org/10.4028/www.scientific.net/KEM.883.35.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 26821
Wibbeke, Tim Michael, et al. “Fügen Und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise.” Fahrzeug + Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie- Und Schadenstagen 22./23. Oktober 2021, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21814
Gröger, Benjamin, et al. “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies.” Materials, MDPI, 2021, doi:https://doi.org/ 10.3390/ma14092286.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 28568
Gröger, Benjamin, et al. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” Production Engineering, 2021, doi:10.1007/s11740-021-01091-x.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 21802
Sander, Sascha, et al. “Methodenentwicklung zur Langzeitprognose von Klebverbindungen bei kombinierter Temperatur- und Medieneinwirkung.” 21. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 31499
Olfert, Viktoria, et al. Einfluss fertigungsbedingter Toleranzen auf das Versagens- und Verformungsverhalten mechanisch gefügter Verbindungen unter Crashbelastung. 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 35512
Haak, Viktor, et al. “Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise (eWES).” 11. Fügetechnisches Gemeinschaftskolloquium, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21549
Kowatz, Jannik, et al. “Experimental Failure Analysis of Adhesively Bonded Steel/CFRP Joints under Quasi-Static and Cyclic Tensile-Shear and Peel Loading.” International Journal of Adhesion and Adhesives, vol. 107, 102851, Elsevier, 2021, doi:10.1016/j.ijadhadh.2021.102851.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 25556 |
Böhnke, Max, et al. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” The International Journal of Advanced Manufacturing Technology, 2021, doi:10.1007/s00170-021-07986-4.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Abstract | LibreCat-ID: 36837
Neumann, Stefan, et al. Longitudinal Mechanical Joining of Extruded Aluminium Profiles with Increased Tightness Requirements. 2021.
LibreCat
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 21803
Tews, Karina, et al. “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze.” DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), 21. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 29499
Duffe, Tobias, et al. “Bruchmechanische Lebensdauervorhersage für hyperelastische Klebverbindungen.” 51. DVM-Tagung, Arbeitskreis Bruchmechanik und Bauteilsicherung, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 34227
Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 81–88, doi:10.4028/www.scientific.net/kem.883.81.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34222
Kappe, Fabian, et al. “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters.” ESAFORM 2021, University of Liege, 2021, doi:10.25518/esaform21.4277.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22798
Böhnke, Max, et al. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.” Materials Testing, vol. 63, no. 6, De Gruyter, 2021, pp. 493–500, doi:10.1515/mt-2020-0082.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34226
Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 22264
Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.” 11. Doktorandenseminar Klebtechnik, DVS Media GmbH.
LibreCat
2021 | Book Chapter | LibreCat-ID: 22930
Uhe, Benedikt, et al. “Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening.” Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series., edited by Glenn Daehn et al., Springer, 2021, pp. 1495–506, doi:10.1007/978-3-030-75381-8_124.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 22274
Uhe, Benedikt, et al. Strength of Self-Piercing Riveted Joints with Conventional Rivets and Rivets Made of High Nitrogen Steel. 2021, doi:10.25518/esaform21.1911.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22272
Uhe, Benedikt, et al. “Influence of the Rivet Coating on the Friction during Self-Piercing Riveting.” Key Engineering Materials, vol. 883, 2021, pp. 11–18, doi:10.4028/www.scientific.net/KEM.883.11.
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 30845
Kuball, Clara-Maria, et al. Selective Application of Different Forming Temperatures for Individual Process Stages in a Rivet Manufacturing Process with High Nitrogen Steel. 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21545 |
Masendorf, Lukas, et al. “Service Life Estimation of Self‐piercing Riveted Joints by Linear Damage Accumulation.” Fatigue & Fracture of Engineering Materials & Structures, 2021, p. 15, doi:10.1111/ffe.13446.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 37822
Han, Daxin, et al. “Mechanical Joining of Glass Fibre Reinforced Polymer (GFRP) through an Innovative Solid Self-Piercing Rivet.” Journal of Materials Processing Technology, vol. 296, 117182, Elsevier BV, 2021, doi:10.1016/j.jmatprotec.2021.117182.
LibreCat
| DOI
2021 | Report | LibreCat-ID: 50457
Tews, Karina, et al. Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze. DVS Media, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 50598
Beule, Felix, et al. Untersuchung Des Einflusses von Relativverschiebungen Während Der Aushärtung Auf Die Mechanischen Eigenschaften von Klebverbindungen. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21811
Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Sheet Metal 2021, vol. 883, Trans Tech Publications Ltd, 2021, pp. 81–88, doi:10.4028/www.scientific.net/KEM.883.81.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 19753
Ditter, Jan, et al. “Simple Determination of Fast Curing Parameters for Bonded Structures.” Adhesion ADHESIVES + SEALANTS, no. 1, 2020.
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 19976
Kuball, Clara-Maria, et al., editors. Process Design for the Forming of Semi-Tubular Self-Piercing Rivets Made of High Nitrogen Steel. Vol. 50, 2020, pp. 280–85, doi:10.1016/j.promfg.2020.08.052.
LibreCat
| DOI
2020 | Report | LibreCat-ID: 20145
Otroshi, Mortaza, and Gerson Meschut. Methodenentwicklung zur Schädigungsmodellierung für die numerische Prozesssimulation mechanischer Fügeverfahren. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2020.
LibreCat
| Files available
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 20146
Masendorf, Lukas, et al. Linear Damage Accumulation of Self-Pierce Riveted Joints. Deutscher Verband für Materialforschung und -prüfung e.V., 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 20170 |
Otroshi, Mortaza, and Gerson Meschut. “Spannungszustandsabhängige Schädigungsmodellierung zum Halbhohlstanznieten.” Umformtechnik Blech Rohre Profile, no. 7/20, 2020, pp. 48–50.
LibreCat
| Files available
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 20235
Heyser, Per, et al. “Increased Load Bearing Capacity of Mechanically Joined FRP/Metal Joints Using a Pin Structured Auxiliary Joining Element.” Materials Testing, 2020, pp. 55–60, doi:10.3139/120.111453.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 20269
Böhne, Christoph, et al. “Avoidance of Liquid Metal Embrittlement during Resistance Spot Welding by Heat Input Dependent Hold Time Adaption.” Science and Technology of Welding and Joining, vol. 25, no. 7, Taylor & Francis, 2020, pp. 617–24, doi:10.1080/13621718.2019.1693731.
LibreCat
| DOI
443 Publications
2024 | Journal Article | LibreCat-ID: 51116
Uhe, Benedikt, et al. “Corrosion Behaviour of Self-Piercing Riveted Joints with Uncoated Rivets in High Nitrogen Steel.” Production Engineering, 2024, doi:10.1007/s11740-024-01262-6.
LibreCat
| DOI
2024 | Journal Article | LibreCat-ID: 52201
Han, Daxin, et al. “Single-Step Self-Punching Lockbolt Process for Aluminum Sheets without Pre-Hole.” Journal of Manufacturing Processes, vol. 116, Elsevier BV, 2024, pp. 92–108, doi:10.1016/j.jmapro.2024.02.043.
LibreCat
| DOI
2024 | Conference Paper | LibreCat-ID: 52213
Beule, Felix, et al. “Methodenentwicklung Zur Rechnerischen Auslegung Geklebter Stahlverbindungen Unter Alterungsbeanspruchung Im Stahl- Und Anlagenbau.” 24. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52211
Beule, Felix, et al. “Klebstoffmodell - Parameteridentifikation, Verifikation Und Validierung Für Den Lastfall Crash.” DECHEMA-Workshop Für Klebstoffanwender: Simulation von Klebverbindungen, edited by DECHEMA, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52214
Beule, Felix, et al. Methodenentwicklung Zur Simulation von Hyperelastischen Klebverbindungen Unter Crashbelastung. Edited by DECHEMA, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52215
Carillo Beber, Vinicius, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52212
Tews, Karina, et al. “Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden.” 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52216
Tews, Karina, et al. Mechanisches Verhalten: Charakterisierung von Klebstoffen. 2024.
LibreCat
2024 | Conference Paper | LibreCat-ID: 52359
Chudalla, Nick, et al. “Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes.” 24. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2024.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 52403
Al Trjman, Mohamad, et al. Methodenentwicklung Zur Simulation Des Viscous Fingering in Klebverbindungen von Stahlintensiven Mischbaustrukturen. 2024.
LibreCat
2024 | Conference Abstract | LibreCat-ID: 52537
Gröger, Benjamin, et al. “Experimentelle Und Numerische Analyse Des Fließverhaltens von Hochviskosen Wärmeleitstoffen Im Fertigungsprozess.” 24. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2024.
LibreCat
2024 | Journal Article | LibreCat-ID: 50726
Schuster, Lilia, et al. “Influences of Weld Nugget Shape and Material Gradient on the Shear Strength of Resistance Spot‐Welded Joints.” Steel Research International, Wiley, 2024, doi:10.1002/srin.202300530.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 36839
Neumann, Stefan, et al. Mechanically Joined Extrusion Profiles for Battery Trays.
LibreCat
2023 | Journal Article | LibreCat-ID: 42636
Heyser, Per, et al. “Development of a Numerical Simulation Model for Self-Piercing Riveting of Additive Manufactured AlSi10Mg.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072311582, SAGE Publications, 2023, doi:10.1177/14644207231158213.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 42643
Chudalla, Nick, et al. Systematisierung Einer Rechnergestützten Auswertemethode Zur Versagensanalyse Geklebter Verbindungen. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 42666
Schmolke, Tobias, et al. Konzeptentwicklung für ein Stahlbatteriegehäuse unter besonderer Berücksichtigung der Fügetechnik und des Korrosionsschutzes. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 42667
Schmolke, Tobias, and Gerson Meschut. Leak Tightness of Bonded Joints in Battery Housings Under Mechanical and Corrosive Loads. 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 42763
Nagel, Christof, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 42766
Tews, Karina, et al. Experimental Investigation of the Fatigue Behavior and Calculation of the Service Life of Adhesively Bonded Joints. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 42872
Göddecke, Johannes, et al. “Experimental and Numerical Investigation of the Damping Properties of Adhesively Bonded Tubular Steel Joints.” The Journal of Adhesion, Informa UK Limited, 2023, pp. 1–31, doi:10.1080/00218464.2023.2178909.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44182
Schmelzle, Lars, et al. “Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung.” 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 43130
Schmolke, Tobias, et al. “Investigation of the Leak Tightness of Structural Adhesive Joints for Use in Battery Housings Considering Mechanical and Corrosive Loads.” The Journal of Adhesion, Taylor & Francis, 2023, doi:10.1080/00218464.2023.2195556.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44181
Beule, Felix, et al. “Methodenentwicklung Zur Simulation von Hyperelastischen Klebverbindungen Unter Crashbelastung.” 23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44183
Kowatz, Jannik, et al. “Weiterentwicklung der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von serienrelevanten Einflussfaktoren.” 23. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 39057
Wippermann, Jan, et al. “Thermal Influence of Resistance Spot Welding on a Nearby Overmolded Thermoplastic–Metal Joint.” Welding in the World, Springer Science and Business Media LLC, 2023, doi:10.1007/s40194-023-01465-y.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 44232
Wippermann, Jan, et al. “Influence of Plasma Coating Pretreatment on the Adhesion of Thermoplastics to Metals.” Tagungsband Münchener Leichtbauseminar 2022, 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 35536
Kowatz, Jannik, et al. “Optimization of Inductive Fast-Curing of Epoxy Adhesive by Model-Based Kinetics.” International Journal of Adhesion and Adhesives, vol. 124, Elsevier, 2023, doi:https://doi.org/10.1016/j.ijadhadh.2023.103392.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 44228
Salten, Alexander Heinrich Johannes, et al. Simulation Des „viscous Fingering“ Effektes in Klebverbindungen. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 44227
Al Trjman, Mohamad, et al. Methodenentwicklung Zur Simulation Des Viscous Fingering in Klebverbindungen von Stahlintensiven Mischbaustrukturen. 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 45557
Rossel, Moritz Sebastian, and Gerson Meschut. “Prozesskettensimulation für das Clinchen mit beweglicher Matrize.” BLECHE+ROHRE+PROFILE, vol. 02/2023, Meisenbach Verlag , 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 45663
Schmolke, Tobias, et al. “On Welding of High-Strength Steels Using Laser Beam Welding and Resistance Spot Weld Bonding with Emphasis on Seam Leak Tightness .” Journal of Manufacturing and Materials Processing, vol. 7, no. 3, MDPI, 2023, doi:10.3390/jmmp7030116.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 45877
Brunner-Schwer, Christian, et al. A Life Cycle Assessment of Joining Processes in the Automotive Industry, Illustrated by the Example of an EV Battery Case. 2023.
LibreCat
2023 | Book | LibreCat-ID: 46812
Rossel, Moritz Sebastian, and Gerson Meschut. Methodenentwicklung zur verbesserten Prognosegüte beim Clinchen mit beweglicher Matrize in der numerischen Fügeprozesssimulation. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 46866
Troschitz, Juliane, et al. “Clinching and Resistance Spot Welding of Thermoplastic Composites with Metals Using Inserts as Joining Interfaces.” Proceedings of the 23rd International Conference on Composite Materials (ICCM23), 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 48585
Uhe, Benedikt, et al. “Controlled Rivet Deformation During Self-Piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material.” Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity., edited by Katia Mocellin et al., vol. 3, Springer, 2023, pp. 64–71, doi:10.1007/978-3-031-41341-4_8.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 48584
Uhe, Benedikt, et al. “Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets.” Journal of Manufacturing and Materials Processing, vol. 7, no. 6, 193, MDPI AG, 2023, doi:10.3390/jmmp7060193.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46295
Bartley, Aurélie, et al. “Low Temperature Debonding of Toughened Structural Adhesive Joints: A New Approach to Repairs in the Automotive Industry.” International Journal of Adhesion and Adhesives, vol. 126, 2023, doi:https://doi.org/10.1016/j.ijadhadh.2023.103486.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 50178
Beule, Felix, et al. “Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, DVS Media GmbH, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50207
Tews, Karina, et al. “Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50275
Schmolke, Tobias, and Gerson Meschut. “Untersuchung Der Dichtheitseigenschaften Hybridgefügter Mischbauverbindungen Für Den Einsatz in Batterieghäusen Für Elektrofahrzeuge.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50276
Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung Der Dämpfungseigenschaften Geklebter Strukturen Unter Dynamischer Beanspruchung.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 50274
Chudalla, Nick, and Gerson Meschut. “Effizientes Lösen von Klebverbindungen in Der Fahrzeuginstandsetzung.” 11. - 13- Doktorandenseminar Klebtechnik, edited by DVS Media GmbH, vol. Band 369, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 36840
Neumann, Stefan, et al. Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches. doi:10.1016/j.procir.2023.09.019.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 50727
Olfert, Viktoria, et al. Methodenentwicklung Zur Prognose Des Crashverhaltens von Widerstandspunktgeschweißten 3-Stahlblechverbindungen. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 50551
Haak, Viktor, et al. “Einfluss von Prozessparametern auf Dreiblech-Hybrid-Mischverbindungen beim zweistufigen Widerstandselementschweißen.” 13. Fügetechnisches Gemeinschaftskolloquium, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 50547
Haak, Viktor, et al. “Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise.” 25. DVS-Sondertagung Widerstandsschweißen, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 43090
Bielak, Christian Roman, et al. “Numerical Analysis of Failure Modeling in Clinching Process Chain Simulation.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-33.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43462
Böhnke, Max, et al. “A Calibration Method for Failure Modeling in Clinching Process Simulations.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-34.
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 52454
Böhnke, Max, et al. “Experimental and Numerical Investigation of Clinched Joints Under Shear Tensile Loading at High Strain Rates.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_12.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 43463
Friedlein, Johannes, et al. “Influence of Plastic Orthotropy on Clinching of Sheet Metal.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-17 .
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 50060
Gilich, Julian, et al. “Influences on the Flow Behavior of Highly Viscous Thermal Interface Materials in the Joining Process.” 14th European Adhesion Conference (EURADH) & 7th World Congress on Adhesion and Related Phenomena (WCARP), 2023.
LibreCat
2023 | Journal Article | LibreCat-ID: 48082 |
Yang, Keke, et al. “The Identification of a New Liquid Metal Embrittlement (LME) Type in Resistance Spot Welding of Advanced High-Strength Steels on Reduced Flange Widths.” Metals (Special Issue Embrittlement Phenomena in Steel Metallurgy), vol. 13, no. 10, MDPI, 2023, doi:10.3390/met13101754.
LibreCat
| Files available
| DOI
2023 | Journal Article | LibreCat-ID: 47042
Göddecke, Johannes, et al. “Auslegungsmethode zum Kleben höchstfester Stahlwerkstoffe im Landmaschinenbau.” Stahlbau, vol. 92, no. 8, Wiley, 2023, pp. 508–19, doi:10.1002/stab.202300031.
LibreCat
| DOI
2023 | Journal Article | LibreCat-ID: 46164
Chudalla, Nick, et al. “Rechnergestützte Versagensanalyse Geklebter Verbindungen.” Adhäsion KLEBEN & DICHTEN, no. 6, 2023, doi:https://doi.org/10.1007/s35145-023-1198-x .
LibreCat
| DOI
2023 | Book Chapter | LibreCat-ID: 52614
Bielak, Christian Roman, et al. “Numerical Investigation of the Coupled Friction Behavior in the Clinching Process Chain.” Lecture Notes in Mechanical Engineering, Springer Nature Switzerland, 2023, doi:10.1007/978-3-031-41341-4_15.
LibreCat
| DOI
2023 | Conference Abstract | LibreCat-ID: 52688
Bähr, Philipp, et al. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau.” 13. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 52689
Striewe, Marius, et al. “Methode zur Simulation des temperaturabhängigen Crashverhaltens von strukturellen Klebverbindungen.” Klebtechnische Doktorandenseminare 2020 - 2022, edited by DVS Media GmbH, vol. 369, 2023.
LibreCat
2023 | Conference Paper | LibreCat-ID: 44220
Uhe, Benedikt, et al. Approach for a Sustainable Process Chain in Manufacturing of Fasteners for Mechanical Joining. Materials Research Proceedings, 2023, doi:10.21741/9781644902417-49.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 52831 |
Butzhammer, Lorenz, et al. “Dynamic Conformity Assessment for Joining Force Monitoring Using Bayes Filters.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-48.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 52821 |
Wituschek, Simon, et al. “Combination of Versatile Self-Piercing Riveting Processes.” Materials Research Proceedings, Materials Research Forum LLC, 2023, doi:10.21741/9781644902417-16.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 29852
Beule, Felix, et al. “Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29855
Carillo Beber, Vinicius, et al. “Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29344
Kowatz, Jannik, et al. “Weiterentwicklung der induktiven Schnellhärtung von Klebverbindungen für robuste Fertigungsprozesse unter Berücksichtigung von serienrelevanten Einflussfaktoren.” 22. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30003
Chudalla, Nick, et al. “Analyse Des Versagensverhaltens Geklebter Stahl-Verbindungen Beim Werkstoffschonenden Entfügen in Der Karosserieinstandsetzung.” 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.
LibreCat
2022 | Book | LibreCat-ID: 30102
Rossel, Moritz Sebastian, and Gerson Meschut. Methodenentwicklung für die Simulation mechanischer Fügeprozesse mit besonderer Berücksichtigung fügespezifischer Reibverhältnisse. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
| Download (ext.)
2022 | Conference Abstract | LibreCat-ID: 30222
Striewe, Marius, et al. “Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung.” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 27186
Otroshi, Mortaza, and Gerson Meschut. “Influence of Cutting Clearance and Punch Geometry on the Stress State in Small Punch Test .” Engineering Failure Analysis, vol. 136, no. c, Elsevier, 2022, doi:10.1016/j.engfailanal.2022.106183.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 30004
Chudalla, Nick, et al. “Systematisierung Einer Rechnergestützten Auswertemethode Zur Versagensanalyse Geklebter Verbindungen .” 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30911
Vorderbrüggen, Julian, et al. “Development of a Rivet Geometry for Solid Self-Piercing Riveting of Thermally Loaded CFRP-Metal Joints in Automotive Construction.” Composite Structures, vol. 291, 115583, Elsevier BV, 2022, doi:10.1016/j.compstruct.2022.115583.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30904
Heyser, Per, et al. “Consideration of the Manufacturing History of Sheet Metal Components for the Adaptation of a Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210775, SAGE Publications, 2022, doi:10.1177/14644207221077560.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30915
Chudalla, Nick, et al. “Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte.” adhäsion KLEBEN & DICHTEN, vol. 66, no. 4, Springer Science and Business Media LLC, 2022, pp. 34–37, doi:10.1007/s35145-022-0576-0.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 32155
Beule, Felix, et al. “Influence of Curing-Induced Pre-Deformations on the Mechanical Properties of Adhesively Bonded Joints in Steel-Intensive Mixed-Material Structures.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 32279
Schmolke, Tobias, and Gerson Meschut. “Investigation of Leak Tightness for Bonded Steel Joints Induced by Mechanical and Corrosive Load for Use in Battery Housings.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32329
Chudalla, Nick, et al. Disjoining and Repair Strategies of Structural Joints in Automotive Lightweight Structures. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 32388
Rossel, Moritz Sebastian, and Gerson Meschut. “Method Development for Increasing the Prediction Quality of Mechanical Joining Process Simulations by Friction Modeling Based on Local Joining Process Parameters.” Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34152
Otroshi, Mortaza, and Gerson Meschut. Methodenentwicklung zur Verbesserung der Schädigungsmodellierung in der numerischen 3D-Belastungssimulation mechanischer Fügeverfahren unter Berücksichtigung der fügeinduzierten Vorbeanspruchung. Europäische Forschungsgesellschaft für Blechverarbeitung e.V. , 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 34153
Otroshi, Mortaza, and Gerson Meschut. Schädigungsmodellierung von Hilfsfügeelementen beim mechanischen Fügen von Stahlwerkstoffen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34213
Ewenz, L., et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 34811
Wippermann, Jan, et al. “Thermal Influence of Resistance Spot Welding on Nearby Overmoulded Plastic Metal Joints.” IIW2022, Annual Assembly, Commission III, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 34810
Wippermann, Jan, et al. “Flexible Teilautomatisierung Des Robotergestützten Mechanischen Fügens.” 12. Gemeinsames Kolloquium Zur Mechanischen Fügetechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 29296
Schmolke, Tobias, et al. “Weight-Optimized Battery Housings for Volume Vehicles.” ATZ Worldwide, vol. 124, no. 1, 2022, pp. 66–71, doi:https://doi.org/10.1007/s38311-021-0766-7.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 29342
Sander, Sascha, et al. “Methodenentwicklung zur rechnerischen Auslegung geklebter Stahlverbindungen unter Alterungsbeanspruchung im Stahl- und Anlagenbau .” 22. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
LibreCat
2022 | Journal Article | LibreCat-ID: 29295
Schmolke, Tobias, et al. “Gewichtsoptimierte Batteriegehäuse für Volumenfahrzeuge.” ATZ - Automobiltechnische Zeitschrift, vol. 124, no. 1, 2022, pp. 80–85, doi:https://doi.org/10.1007/s35148-021-0785-0.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 31150
Heyser, Per, et al. “Metamodellbasierte Prozesskette - Umformen-Schneiden-Spannen-Fügen.” Pressen, Systeme, Prozesse der Zukunft Effizienz + Digitalisierung, edited by Europäische Forschungsgesellschaft für Blechverarbeitung, vol. T 50, Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 31149
Meschut, Gerson, et al. Konzeption einer adaptiven Prozesskette für das mechanische Fügen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 31151
Heyser, Per, et al. “Smart Process Chain – Data Analysis in Sheet Metal Processing for Joinability Prediction.” SMART PRODUCTION 2022: DIGITALIZING AUTOMOTIVE MANUFACTURING, Automotive Circle, 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 31540
Çavdar, Serkan, and Gerson Meschut. “Stress-Based Fatigue Lifetime Prediction of Adhesively Bonded Joints with Hyperelastic Deformation Behavior.” 45th Annual Meeting of The Adhesion Society, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 30123
Otroshi, Mortaza, and Gerson Meschut. Investigation of the Three-Dimensional Stress State during Loading of Self-Piercing Riveted Joints.
LibreCat
2022 | Conference Paper | LibreCat-ID: 33561
Tews, Karina, et al. Experimentelle Untersuchung des Ermüdungsverhaltens und Berechnung der Lebensdauer von Stahlklebverbindungen bei multiaxialer Belastung. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 35531
Chudalla, Nick, et al. Efficient Debonding of Adhesively Bonded Joints in Car Body Repair. 2022.
LibreCat
2022 | Conference Paper | LibreCat-ID: 35947
Olfert, Viktoria, et al. Development of a Crash Behaviour Prediction Method for Resistance Spot Welded 3-Steel Sheet Joints. SCT, 2022.
LibreCat
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 32413
Bielak, Christian Roman, et al. “Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1516–26, doi:10.4028/p-5d009y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 31330
Beule, Felix, et al. “Directional Dependence of the Mechanical Properties of Structural Adhesive Joints with Curing-Induced Pre-Deformations.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 095440702211001, SAGE Publications, 2022, doi:10.1177/09544070221100130.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 33002
Böhnke, Max, et al. “Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests.” Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022, pp. 1564–72, doi:10.4028/p-wpuzyw.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 33003
Böhnke, Max, et al. “Development of a Modified Punch Test for Investigating the Failure Behavior in Sheet Metal Materials.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_52.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34572
Böhnke, Max, et al. “Experimental and Numerical Investigation of the Influence of Multiaxial Loading Conditions on the Failure Behavior of Clinched Joints.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Journals, 2022, doi:10.1177/14644207221145886.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34459
Schmelzle, Lars, et al. “Testing, Modelling, and Parameter Identification for Adhesively Bonded Joints under the Influence of Temperature.” Journal of Adhesion Science and Technology, 2022, doi:10.1080/01694243.2022.2125714.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 20446
Neumann, Stefan, et al. Robotergestütztes manuelles mechanisches Fügen – RoboterFügen.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29853
Tews, Karina, et al. “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze .” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 32392
Duffe, Tobias, et al. “Global Energy Release Rate of Small Penny-Shaped Cracks in Hyperelastic Materials under General Stress Conditions.” Theoretical and Applied Fracture Mechanics, 2022, doi:10.1016/j.tafmec.2022.103461.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 33088
Duffe, Tobias, et al. “Fracture Mechanical Concept to Predict Crack Nucleation in Elastic Adhesive Joints.” ECF23, European Conference on Fracture 2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 33495
Duffe, Tobias, et al. “Numerische Lebensdauerprognose von hyperelastischen Klebverbindungen mit einem bruchmechanischen Ansatz.” Fachzeitschrift für Schweißen und verwandte Verfahren, vol. 74, no. 9, DVS, 2022, pp. 570–76.
LibreCat
2022 | Conference Paper | LibreCat-ID: 30153
Schmolke, Tobias, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 44199
Chudalla, Nick, et al. Analyse des Versagensverhaltens geklebter Stahl- Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung. P 1396, Forschungsvereinigung Stahlanwendung e. V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 44209
Schmolke, Tobias, et al. Entwicklung einer Methode zur Bewertung einer stahlintensiven Mischbau-Klebverbindung eines Batteriegehäuses gegenüber mechanischer und medialer Belastung unter Berücksichtigung der Interphasenstruktur . P1399 ed., Forschungsvereinigung Stahlanwendung e. V., 2022.
LibreCat
2022 | Book | LibreCat-ID: 44213
Göddecke, Johannes, et al. Experimentelle und numerische Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung. Forschungsvereinigung Stahlanwendung e.V., 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34216
Meschut, Gerson, et al. “Review on Mechanical Joining by Plastic Deformation.” Journal of Advanced Joining Processes, vol. 5, 100113, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100113.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 42874
Göddecke, Johannes, et al. Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 34241
Kappe, Fabian, et al. “Joining of Multi-Material Structures Using a Versatile Self-Piercing Riveting Process.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01151-w.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30100
Zirngibl, Christoph, et al. “Provision of Cross-Domain Knowledge in Mechanical Joining Using Ontologies.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-022-01117-y.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30884
Rossel, Moritz Sebastian, and Gerson Meschut. “Investigation of the Friction Conditions of Self-Pierce Rivets by Means of a Compression-Torsion Tribometer.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01126-x.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34275
Kappe, Fabian, et al. “Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-Tubular Self-Piercing Riveting.” Materials Design and Applications IV, Springer International Publishing, 2022, doi:10.1007/978-3-031-18130-6_10.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29858
Kappe, Fabian, et al. “Increasing Flexibility of Self-Piercing Riveting by Reducing Tool–Geometry Combinations Using Cluster Analysis in the Application of Multi-Material Design.” Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2022, doi:10.1177/14644207211070992.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29857
Kappe, Fabian, et al. “Determining the Properties of Multi‑range Semi‑tubular Self‑piercing Riveted Joints.” Production Engineering, 2022, doi:https://doi.org/10.1007/s11740-022-01105-2.
LibreCat
| DOI
2022 | Book Chapter | LibreCat-ID: 34210
Bielak, Christian Roman, et al. “Development of a Numerical 3D Model for Analyzing Clinched Joints in Versatile Process Chains.” The Minerals, Metals & Materials Series, Springer International Publishing, 2022, doi:10.1007/978-3-031-06212-4_15.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 36838
Neumann, Stefan, et al. MECHANICALLY JOINED EXTRUSION PROFILES FOR BATTERY TRAYS. 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30736
Rossel, Moritz Sebastian, and Gerson Meschut. “Increasing the Accuracy of Clinching Process Simulations by Modeling the Friction as a Function of Local Joining Process Parameters.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210742, SAGE Publications, 2022, doi:10.1177/14644207221074290.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 28766
Sander, Sascha, et al. “Methodology for the Systematic Investigation of the Hygrothermal-Mechanical Behavior of a Structural Epoxy Adhesive.” International Journal of Adhesion and Adhesives, 103072, Elsevier, 2022, doi:10.1016/j.ijadhadh.2021.103072.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30847
Kuball, Clara-Maria, et al. “Process-Adapted Temperature Application within a Two-Stage Rivet Forming Process for High Nitrogen Steel.” Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 2022, pp. 1–17, doi:10.1177/14644207211068693.
LibreCat
| DOI
2022 | Conference Paper | LibreCat-ID: 44265
Uhe, Benedikt, and Gerson Meschut. Lösungsstrategien Für Das Halbhohlstanznieten von Höchstfesten Und Ultrahöchstfesten Stählen Mit Aluminiumwerkstoffen. Edited by FOSTA, EFB, DVS, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30962
Bielak, Christian Roman, et al. “Numerical Investigation of a Friction Test to Determine the Friction Coefficients for the Clinching Process.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210934, SAGE Publications, 2022, doi:10.1177/14644207221093468.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30963
Ewenz, Lars, et al. “Numerical and Experimental Identification of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34069
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol. 6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 34068
Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process Chain - Part II: Joining Process.” Journal of Advanced Joining Processes, 100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 29951 |
Martin, Sven, et al. “Numerical Investigation of the Clinched Joint Loadings Considering the Initial Pre-Strain in the Joining Area.” Production Engineering, Springer Science and Business Media LLC, 2022, doi:10.1007/s11740-021-01103-w.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 44269
Tittmann, Karsten, et al. “Service Strength Analysis Method for Adhesively Bonded Hybrid Structures under Multiaxial Loading.” Proceedings of the 20th European Conference on Composite Materials, edited by Ecole Polytechnique Fédérale de Lausanne (EPFL), vol. 2, 2022, pp. 730–39.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 29856
Jamei, Said, et al. “DigiBody - Digitale Prozesskette zur Abbildung und Optimierung der Fügetechnik im Rohbau .” 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.
LibreCat
2022 | Conference Abstract | LibreCat-ID: 42239
Klöppel, Thomas, et al. “A New Viscoelastic-Viscoplastic Constitutive Formulation in LS-DYNA to Model Adhesives during the Complete Manufacturing-Crashworthiness Process Chain.” 4a-Technologietage 2022, 2022.
LibreCat
2022 | Journal Article | LibreCat-ID: 30951
Schmolke, Tobias, et al. “Development of a Test Method for Investigating the Leak Tightness of Hybrid Joined Battery Housing Connections.” International Journal of Adhesion and Adhesives, vol. 117, 103171, Elsevier BV, 2022, doi:10.1016/j.ijadhadh.2022.103171.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 30394
Hecht, Matthias, et al. “Fatigue Strength of Adhesively Butt-Bonded Hollow Cylinders under Multiaxial Loading with Constant and Variable Amplitudes.” Procedia Structural Integrity, vol. 38, Elsevier BV, 2022, pp. 251–59, doi:10.1016/j.prostr.2022.03.026.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 36332 |
Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol. 24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
LibreCat
| DOI
| Download (ext.)
2022 | Journal Article | LibreCat-ID: 29724
Neuser, Moritz, et al. “Influence of Heat Treatment on the Suitability for Clinching of the Aluminium Casting Alloy AlSi9.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442072210758, SAGE Publications, 2022, doi:10.1177/14644207221075838.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52613
Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding Society, 2022, pp. 197–207, doi:10.29391/2022.101.015.
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 52615
Böhne, Christoph, and Gerson Meschut. “Reduction of Flange Widths in Resistance Spot Welding by Application of Eccentric Electrode Cap Geometries.” Welding and Cutting, vol. 3, 2022, pp. 208–12, doi:10.53192/WAC202203208 .
LibreCat
| DOI
2022 | Journal Article | LibreCat-ID: 32283
Schmolke, Tobias, et al. “Untersuchung von Klebverbindungen für Batteriegehäuse.” adhäsion KLEBEN & DICHTEN , vol. 66, Springer Nature, 2022, pp. 40–43, doi:https://doi.org/10.1007/s35145-022-0596-9.
LibreCat
| DOI
2022 | Conference Abstract | LibreCat-ID: 52687
Bähr, Philipp, et al. “Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven Karosseriebau.” 12. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2022.
LibreCat
2021 | Journal Article | LibreCat-ID: 25104
Göddecke, Johannes, et al. “Dämpfungseigenschaften geklebter Verbindungen - Potenzialanalyse und Klebstoffcharakterisierung.” adhäsion KLEBEN & DICHTEN, Springer Nature, 2021, pp. 14–23, doi:https://doi.org/10.1007/s35145-021-0520-8.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 28443
Rossel, Moritz Sebastian, and Gerson Meschut. “Steigerung der Prognosegüte mechanischer Fügeprozesssimulationen durch den Einsatz einer fügespezifischen Reibmodellierung basierend auf einer experimentellen Parametrisierung.” 11. Fügetechnisches Gemeinschaftskolloquium, edited by FOSTA, EFB, DVS, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 28448 |
Droß, M., et al. “Fiber Response to Pin Penetration in Dry Woven Fabric Using Numerical Analysis.” Journal of Advanced Joining Processes, 100083, 2021, doi:10.1016/j.jajp.2021.100083.
LibreCat
| DOI
| Download (ext.)
2021 | Book | LibreCat-ID: 26649
Han, Daxin, and Gerson Meschut. Mechanisches Fügen von FKV-FKV-Verbindungen. 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 27199
Aßmuth, Verena, and Gerson Meschut. “Effect of Low-Profile Additives on the Durability of Adhesively Bonded Sheet Moulding Compound (SMC).” International Journal of Adhesion and Adhesives, vol. 112, 103036, Elsevier, 2021, doi:10.1016/j.ijadhadh.2021.103036.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 27490
Schmolke, Tobias, and Gerson Meschut. “Konzeptentwicklung für ein Stahlbatteriegehäuse.” stahl., vol. 3-4 / 2021, Vulkan-Verlag GmbH, 2021, pp. 37–39.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 27702
Helbig, Martin, et al. “Modeling of Adhesives in Crash Simulation under Consideration of Manufacturing Processes.” Vortrag in: Automotive CAE Grand Challange, 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 27703
Helbig, Martin, et al. “DigiBody - Optimizing of Joining Technology.” Vortrag in: 13th European LS-DYNA Conference, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21280
Masendorf, Lukas, et al. Simulationsbasierte Lebensdauerabschätzung einer stanzgenieteten Fügeverbindung unter zyklischer Belastung. 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 21431
Chudalla, Nick, et al. “Analyse Des Versagensverhaltens Geklebter Stahl Verbindungen Beim Werkstoffschonenden Entfügen in Der Karosserieinstandsetzung.” 21. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 20302
Günter, Heinrich, and Gerson Meschut. “Joining of Ultra-High-Strength Steels Using Resistance Element Welding on Conventional Resistance Spot Welding Guns.” Welding in the World, 2021, doi:https://doi.org/10.1007/s40194-021-01122-2.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 20303
Günter, Heinrich, et al. “Joining of Press-Hardened Profiles for the Mixed-Intensive Lightweight Structural Design in Electric Vehicles.” Joining in Car Body Engineering 2021, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 20641
Aßmuth, Verena, et al. “Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile.” 10. Doktorandenseminar Klebtechnik, vol. 369, DVS Media GmbH.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22225
Ivanjko, Martin, et al. Development of an Adaptive, Sensor-Based FDS-Robot-System. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22260
Schmolke, Tobias, and Gerson Meschut. Untersuchung der Dichtheitseigenschaften hybridgefügter Mischbauverbindungen für den Einsatz in Batteriegehäusen für Elektrofahrzeuge. Edited by DVS.
LibreCat
2021 | Newspaper Article | LibreCat-ID: 22275
Böhne, Christoph, et al. “Reduzierung der Flanschbreiten beim Widerstandspunktschweißen durch Einsatz exzentrischer Elektrodenkappengeometrien.” Schweißen und Schneiden, vol. 73, no. 1–2, 2021, pp. 26–31.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22276
Böhne, Christoph, et al. Practical Methods for Avoidance of Liquid Metal Embrittlement in Resistance Spot Welds of Advanced High Strength Steels. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22277
Böhne, Christoph, et al. Application-Oriented Avoidance of Liquid Metal Embrittlement during Resistance Spot Welding of Zinc-Coated Advanced High Strenght Steels. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 22281
Rotzsche, Dirk, et al. “Joining of Press-Hardened Profiles for the Mixed-Intensive Lightweight Structural Design in Electric Vehicles.” Joining in Car Body Engineering 2021, 2021.
LibreCat
2021 | Report | LibreCat-ID: 22774
Schmolke, Tobias, et al. Entwicklung einer gewichtsoptimierten Batteriegehäusestruktur für Volumenfahrzeuge. Forschungsvereinigung Automobiltechnik (FAT) , 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21679
Han, Daxin, et al. “A Method for Three-Dimensional Modelling of the Shear-Clinching Process.” ESAFORM 2021, 2021, doi:10.25518/esaform21.1948.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 21716
Schmolke, Tobias, et al. Development of a Leak Test Method for the Joining Technology of Functionally Integrated Lightweight Battery Housings for Electric Vehicles. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21717
Schmolke, Tobias, et al. Entwicklung Einer Methode Zur Bewertung Einer Stahlintensiven Mischbau-Klebverbindung Eines Batteriegehäuses Gegenüber Mechanischer Und Medialer Belastung Und Berücksichtigung Der Interphasenstruktur. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21718
Fischer, Elena, et al. Auslegungsmethode Für Klebverbindungen Mit KTL-Beschichteten Fügeteilen Und Polymeren, Faserverstärkten Werkstoffen – Kleben Auf KTL. Edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V, 2021.
LibreCat
2021 | Book | LibreCat-ID: 21800
Sander, Sascha, et al. Intrinsische Hybridverbunde für Leichtbautragstrukturen. Springer Vieweg, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21823
Han, Daxin, et al. “Mechanical Joining of Glass Fibre Reinforced Polymer (GFRP) through an Innovative Solid Self-Piercing Rivet.” Journal of Materials Processing Technology, 117182, 2021, doi:10.1016/j.jmatprotec.2021.117182.
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 21560
Beule, Felix, et al. “Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen.” 21. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 20807 |
Bielak, Christian Roman, et al. Further Development of a Numerical Method for Analyzing the Load Capacity of Clinched Joints in Versatile Process Chains. doi:10.25518/esaform21.4298.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 25476 |
Otroshi, Mortaza, et al. “The Influence of Manufacturing Processes and Optical Measurement Methods on the Damage Behavior of HX340LAD Micro-Alloyed Steels.” Journal of Manufacturing Engineering, vol. 16, no. 3, 2021, pp. 70–76, doi:https://doi.org/10.37255/jme.v16i3pp070-076.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 21810
Otroshi, Mortaza, et al. “Modeling of Stiffness Anisotropy in Simulation of Self-Piercing Riveted Components.” Key Engineering Materials, vol. 883, Trans Tech Publications Ltd, 2021, pp. 35–40, doi:https://doi.org/10.4028/www.scientific.net/KEM.883.35.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 26821
Wibbeke, Tim Michael, et al. “Fügen Und Trennen von Kfz-Karosseriestrukturen in Leichtbauweise.” Fahrzeug + Karosserie Und Kfz-Betrieb (Hrsg,); Tagungsband Zu Den Würzburger Karosserie- Und Schadenstagen 22./23. Oktober 2021, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21814
Gröger, Benjamin, et al. “Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies.” Materials, MDPI, 2021, doi:https://doi.org/ 10.3390/ma14092286.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 28568
Gröger, Benjamin, et al. “Computed Tomography Investigation of the Material Structure in Clinch Joints in Aluminium Fibre-Reinforced Thermoplastic Sheets.” Production Engineering, 2021, doi:10.1007/s11740-021-01091-x.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 21802
Sander, Sascha, et al. “Methodenentwicklung zur Langzeitprognose von Klebverbindungen bei kombinierter Temperatur- und Medieneinwirkung.” 21. Kolloquium Gemeinsame Forschung in der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 31499
Olfert, Viktoria, et al. Einfluss fertigungsbedingter Toleranzen auf das Versagens- und Verformungsverhalten mechanisch gefügter Verbindungen unter Crashbelastung. 2021.
LibreCat
2021 | Conference Abstract | LibreCat-ID: 35512
Haak, Viktor, et al. “Einseitiges Widerstandselementschweißen für die stahlintensive Mischbauweise (eWES).” 11. Fügetechnisches Gemeinschaftskolloquium, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21549
Kowatz, Jannik, et al. “Experimental Failure Analysis of Adhesively Bonded Steel/CFRP Joints under Quasi-Static and Cyclic Tensile-Shear and Peel Loading.” International Journal of Adhesion and Adhesives, vol. 107, 102851, Elsevier, 2021, doi:10.1016/j.ijadhadh.2021.102851.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 25556 |
Böhnke, Max, et al. “Concept Development of a Method for Identifying Friction Coefficients for the Numerical Simulation of Clinching Processes.” The International Journal of Advanced Manufacturing Technology, 2021, doi:10.1007/s00170-021-07986-4.
LibreCat
| DOI
| Download (ext.)
2021 | Conference Abstract | LibreCat-ID: 36837
Neumann, Stefan, et al. Longitudinal Mechanical Joining of Extruded Aluminium Profiles with Increased Tightness Requirements. 2021.
LibreCat
2021 | Book Chapter | LibreCat-ID: 29086
Drossel, Welf-G., et al. “Hybridprofile Für Trag- Und Crashstrukturen.” Intrinsische Hybridverbunde Für Leichtbautragstrukturen, 2021, doi:10.1007/978-3-662-62833-1_3.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 21803
Tews, Karina, et al. “Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze.” DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), 21. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 29499
Duffe, Tobias, et al. “Bruchmechanische Lebensdauervorhersage für hyperelastische Klebverbindungen.” 51. DVM-Tagung, Arbeitskreis Bruchmechanik und Bauteilsicherung, 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 34227
Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 81–88, doi:10.4028/www.scientific.net/kem.883.81.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 34222
Kappe, Fabian, et al. “Influence of rivet length on joint formation on self-piercing riveting process considering further process parameters.” ESAFORM 2021, University of Liege, 2021, doi:10.25518/esaform21.4277.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22798
Böhnke, Max, et al. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.” Materials Testing, vol. 63, no. 6, De Gruyter, 2021, pp. 493–500, doi:10.1515/mt-2020-0082.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 34226
Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” Key Engineering Materials, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:10.4028/www.scientific.net/kem.883.3.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 22264
Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.” 11. Doktorandenseminar Klebtechnik, DVS Media GmbH.
LibreCat
2021 | Book Chapter | LibreCat-ID: 22930
Uhe, Benedikt, et al. “Self-Piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening.” Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. The Minerals, Metals & Materials Series., edited by Glenn Daehn et al., Springer, 2021, pp. 1495–506, doi:10.1007/978-3-030-75381-8_124.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 22274
Uhe, Benedikt, et al. Strength of Self-Piercing Riveted Joints with Conventional Rivets and Rivets Made of High Nitrogen Steel. 2021, doi:10.25518/esaform21.1911.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 22272
Uhe, Benedikt, et al. “Influence of the Rivet Coating on the Friction during Self-Piercing Riveting.” Key Engineering Materials, vol. 883, 2021, pp. 11–18, doi:10.4028/www.scientific.net/KEM.883.11.
LibreCat
| DOI
2021 | Conference Abstract | LibreCat-ID: 30845
Kuball, Clara-Maria, et al. Selective Application of Different Forming Temperatures for Individual Process Stages in a Rivet Manufacturing Process with High Nitrogen Steel. 2021.
LibreCat
2021 | Journal Article | LibreCat-ID: 21545 |
Masendorf, Lukas, et al. “Service Life Estimation of Self‐piercing Riveted Joints by Linear Damage Accumulation.” Fatigue & Fracture of Engineering Materials & Structures, 2021, p. 15, doi:10.1111/ffe.13446.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 37822
Han, Daxin, et al. “Mechanical Joining of Glass Fibre Reinforced Polymer (GFRP) through an Innovative Solid Self-Piercing Rivet.” Journal of Materials Processing Technology, vol. 296, 117182, Elsevier BV, 2021, doi:10.1016/j.jmatprotec.2021.117182.
LibreCat
| DOI
2021 | Report | LibreCat-ID: 50457
Tews, Karina, et al. Methodenentwicklung zur numerischen Lebensdauerprognose von hyperelastischen Klebverbindungen infolge zyklischer Beanspruchung mittels bruchmechanischer Ansätze. DVS Media, 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 50598
Beule, Felix, et al. Untersuchung Des Einflusses von Relativverschiebungen Während Der Aushärtung Auf Die Mechanischen Eigenschaften von Klebverbindungen. 2021.
LibreCat
2021 | Conference Paper | LibreCat-ID: 21811
Rossel, Moritz Sebastian, et al. “Development of a Method for the Identification of Friction Coefficients in Sheet Metal Materials for the Numerical Simulation of Clinching Processes.” Sheet Metal 2021, vol. 883, Trans Tech Publications Ltd, 2021, pp. 81–88, doi:10.4028/www.scientific.net/KEM.883.81.
LibreCat
| DOI
2021 | Journal Article | LibreCat-ID: 24537
Neuser, Moritz, et al. “Joining Suitability of Cast Aluminium for Self-Piercing Riveting.” IOP Conference Series: Materials Science and Engineering, 012005, 2021, doi:10.1088/1757-899x/1157/1/012005.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 19753
Ditter, Jan, et al. “Simple Determination of Fast Curing Parameters for Bonded Structures.” Adhesion ADHESIVES + SEALANTS, no. 1, 2020.
LibreCat
2020 | Conference (Editor) | LibreCat-ID: 19976
Kuball, Clara-Maria, et al., editors. Process Design for the Forming of Semi-Tubular Self-Piercing Rivets Made of High Nitrogen Steel. Vol. 50, 2020, pp. 280–85, doi:10.1016/j.promfg.2020.08.052.
LibreCat
| DOI
2020 | Report | LibreCat-ID: 20145
Otroshi, Mortaza, and Gerson Meschut. Methodenentwicklung zur Schädigungsmodellierung für die numerische Prozesssimulation mechanischer Fügeverfahren. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2020.
LibreCat
| Files available
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 20146
Masendorf, Lukas, et al. Linear Damage Accumulation of Self-Pierce Riveted Joints. Deutscher Verband für Materialforschung und -prüfung e.V., 2020.
LibreCat
2020 | Journal Article | LibreCat-ID: 20170 |
Otroshi, Mortaza, and Gerson Meschut. “Spannungszustandsabhängige Schädigungsmodellierung zum Halbhohlstanznieten.” Umformtechnik Blech Rohre Profile, no. 7/20, 2020, pp. 48–50.
LibreCat
| Files available
| Download (ext.)
2020 | Journal Article | LibreCat-ID: 20235
Heyser, Per, et al. “Increased Load Bearing Capacity of Mechanically Joined FRP/Metal Joints Using a Pin Structured Auxiliary Joining Element.” Materials Testing, 2020, pp. 55–60, doi:10.3139/120.111453.
LibreCat
| DOI
2020 | Journal Article | LibreCat-ID: 20269
Böhne, Christoph, et al. “Avoidance of Liquid Metal Embrittlement during Resistance Spot Welding by Heat Input Dependent Hold Time Adaption.” Science and Technology of Welding and Joining, vol. 25, no. 7, Taylor & Francis, 2020, pp. 617–24, doi:10.1080/13621718.2019.1693731.
LibreCat
| DOI