Walter Sextro

Lehrstuhl für Dynamik und Mechatronik (LDM)
walter.sextro@uni-paderborn.de
ID
21220

198 Publications

Mark all

[198]
2024 | Journal Article | LibreCat-ID: 51518
Aimiyekagbon OK, Bender A, Hemsel T, Sextro W. Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions. Electronics. 2024;13(3). doi:10.3390/electronics13030521
LibreCat | DOI
 
[197]
2023 | Conference Paper | LibreCat-ID: 46813 | OA
Wohlleben MC, Muth L, Peitz S, Sextro W. Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits. In: Proceedings in Applied Mathematics and Mechanics. Wiley; 2023. doi:10.1002/pamm.202300039
LibreCat | DOI | Download (ext.)
 
[196]
2023 | Conference Paper | LibreCat-ID: 47116 | OA
Aimiyekagbon OK, Löwen A, Bender A, Muth L, Sextro W. Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System. In: Proceedings of the Asia Pacific Conference of the PHM Society 2023 . Vol 4. ; 2023. doi:10.36001/phmap.2023.v4i1.3596
LibreCat | DOI | Download (ext.)
 
[195]
2023 | Conference Abstract | LibreCat-ID: 51117
Scheidemann C, Hemsel T, Friesen O, Claes L, Sextro W. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. In: ; 2023.
LibreCat
 
[194]
2023 | Conference Abstract | LibreCat-ID: 51118
Scheidemann C, Hemsel T, Friesen O, Claes L, Sextro W. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. In: ; 2023.
LibreCat
 
[193]
2023 | Conference Abstract | LibreCat-ID: 51119
Scheidemann C, Hagedorn OEC, Hemsel T, Sextro W. Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. In: ; 2023.
LibreCat
 
[192]
2023 | Book Chapter | LibreCat-ID: 51338
Schütte J, Sextro W. Einfluss der Radhubkinematik auf den Reifenverschleiß. In: 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn. Vol 2425. VDI-Berichte. VDI Verlag GmbH; 2023:165-180.
LibreCat
 
[191]
2022 | Conference Paper | LibreCat-ID: 29934
Muth L, Noll C, Sextro W. Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data. In: Orlova A, Cole D, eds. Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021. Lecture Notes in Mechanical Engineering. Springer; 2022. doi:10.1007/978-3-031-07305-2_92
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Book Chapter | LibreCat-ID: 29727
Wohlleben MC, Bender A, Peitz S, Sextro W. Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction. In: Machine Learning, Optimization, and Data Science. Springer International Publishing; 2022. doi:10.1007/978-3-030-95470-3_8
LibreCat | DOI | Download (ext.)
 
[189]
2022 | Conference Paper | LibreCat-ID: 30371
Hagedorn OEC, Broll M, Kirsch O, Hemsel T, Sextro W. Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding. In: CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems. VDE VERLAG GMBH; 2022:138-143.
LibreCat
 
[188]
2022 | Newspaper Article | LibreCat-ID: 47159
Aimiyekagbon OK, Bender A, Sextro W. On the applicability of time series features as health indicators for technical systems operating under varying conditions. Condition Monitor. 2022:5-10.
LibreCat
 
[187]
2022 | Conference Paper | LibreCat-ID: 34104
Scheidemann C, Kirsch O, Hemsel T, Sextro W. Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding. In: 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). IEEE; 2022. doi:10.1109/estc55720.2022.9939478
LibreCat | DOI
 
[186]
2022 | Patent | LibreCat-ID: 9980
Reinke K, Bender A, Meyer T, Sextro W, Kimotho JK. Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer. Published online 2022.
LibreCat | Files available
 
[185]
2022 | Report | LibreCat-ID: 52045
Scheidemann C, Hemsel T, Sextro W. Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University; 2022. doi:10.2314/KXP:1879655276
LibreCat | Files available | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 27652
Aimiyekagbon OK, Bender A, Sextro W. Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten . In: VDI-Berichte 2391. VDI Verlag GmbH; 2021:197-210.
LibreCat
 
[183]
2021 | Journal Article | LibreCat-ID: 21436
Schemmel R, Krieger V, Hemsel T, Sextro W. Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. Microelectronics Reliability. 2021;119:114077. doi:https://doi.org/10.1016/j.microrel.2021.114077
LibreCat | DOI
 
[182]
2021 | Conference Paper | LibreCat-ID: 22724 | OA
Bender A, Sextro W. Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties. In: Do P, King S, Fink Olga, eds. Proceedings of the European Conference of the PHM Society 2021. Vol 6. ; 2021. doi:https://doi.org/10.36001/phme.2021.v6i1.2843
LibreCat | DOI | Download (ext.)
 
[181]
2021 | Conference Paper | LibreCat-ID: 22507 | OA
Aimiyekagbon OK, Bender A, Sextro W. On the applicability of time series features as health indicators for technical systems operating under varying conditions. In: Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat | Files available
 
[180]
2021 | Conference Paper | LibreCat-ID: 27111 | OA
Aimiyekagbon OK, Muth L, Wohlleben MC, Bender A, Sextro W. Rule-based Diagnostics of a Production Line. In: Do P, King S, Fink O, eds. Proceedings of the European Conference of the PHM Society 2021. Vol 6. ; 2021:527-536. doi:10.36001/phme.2021.v6i1.3042
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 27508 | OA
Schütte J, Sextro W. Tire Wear Reduction Based on an Extended Multibody Rear Axle Model. Vehicles. Published online 2021:233-256. doi:10.3390/vehicles3020015
LibreCat | DOI | Download (ext.)
 
[178]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin S, Schütte J, Bäumler C, Sextro W, Tröster T. Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics. 2021;6. doi:10.1016/j.finmec.2021.100065
LibreCat | DOI | Download (ext.)
 
[177]
2020 | Conference Paper | LibreCat-ID: 17355
Schemmel R, Scheidemann C, Hemsel T, Kirsch O, Sextro W. Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding. In: CIPS 2020; 11th International Conference on Integrated Power Electronics Systems. ; 2020:1-6.
LibreCat
 
[176]
2020 | Book | LibreCat-ID: 9857
Magnus K, Popp K, Sextro W. Schwingungen. Springer Vieweg Wiesbaden; 2020. doi:10.1007/978-3-658-31116-2
LibreCat | DOI
 
[175]
2020 | Conference Paper | LibreCat-ID: 17706
Schemmel R, Krieger V, Hemsel T, Sextro W. Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. In: 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). ; 2020. doi:10.1109/eurosime48426.2020.9152679
LibreCat | DOI
 
[174]
2020 | Conference Paper | LibreCat-ID: 17810
Aimiyekagbon OK, Bender A, Sextro W. Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data. In: PHM Society European Conference. Vol 5. ; 2020.
LibreCat
 
[173]
2020 | Book Chapter | LibreCat-ID: 22007
Schütte J, Sextro W. Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear. In: Lecture Notes in Mechanical Engineering. ; 2020. doi:10.1007/978-3-030-38077-9_201
LibreCat | DOI
 
[172]
2020 | Patent | LibreCat-ID: 9981
Reinke K, Bender A, Meyer T, Sextro W, Kimotho JK. Patent EP 3 358 332 B1: Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts. Published online 2020.
LibreCat | Files available
 
[171]
2019 | Conference Paper | LibreCat-ID: 23716
Kaul T, Hentze J, Sextro W, Gräßler I. Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung. In: Bertram T, Corves B, Gräßler I, Janschek K, eds. Fachtagung Mechatronik 2019 Paderborn. ; 2019:19-24.
LibreCat
 
[170]
2019 | Conference Paper | LibreCat-ID: 15475
Schütte J, Sextro W, Kohl S. Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen. In: Fachtagung Mechatronik 2019. Paderborn: Universitätsbibliothek Paderborn, 2019; 2019. doi:10.17619/UNIPB/1-777
LibreCat | DOI
 
[169]
2019 | Conference Paper | LibreCat-ID: 14852
Dunst P, Bornmann P, Hemsel T, Littmann W, Sextro W. Atomization of Fluids with Ultrasound. In: Lötters J, Urban G, eds. Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019). Enschede, The Netherlands; 2019:140-143.
LibreCat | Files available
 
[168]
2019 | Conference Paper | LibreCat-ID: 15244
Hagedorn OEC, Pielsticker D, Hemsel T, Sextro W. Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen. In: 2. VDI-Fachtagung Schwingungen 2019. VDI Verlag GmbH · Düsseldorf 2019; 2019.
LibreCat
 
[167]
2019 | Book | LibreCat-ID: 10002
Sextro W, Brökelmann M. Intelligente Herstellung Zuverlässiger Kupferbondverbindungen. Vol VIII. Springer Verlag; 2019. doi:10.1007/978-3-662-55146-2
LibreCat | DOI
 
[166]
2019 | Conference Paper | LibreCat-ID: 10255
Bender A, Reinke K, Sextro W. Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement. In: 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019. Vol VDI-Berichte 2346. Bremen 2019; 2019:241-248.
LibreCat
 
[165]
2019 | Conference Paper | LibreCat-ID: 10257
Kaul T, Hentze J, Sextro W, Gräßler I. Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung. In: Fachtagung Mechatronik 2019 Paderborn. ; 2019.
LibreCat
 
[164]
2019 | Conference Paper | LibreCat-ID: 10258
Dunst P, Hemsel T, Bornmann P, Littmann W, Sextro W. Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten. In: DAGA 2019. ; 2019.
LibreCat
 
[163]
2019 | Journal Article | LibreCat-ID: 10334
Schemmel R, Hemsel T, Dymel C, Hunstig M, Brökelmann M, Sextro W. Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding. Sensors and Actuators A: Physical. 2019;295:653-662. doi:10.1016/j.sna.2019.04.025
LibreCat | DOI
 
[162]
2019 | Conference Paper | LibreCat-ID: 13460 | OA
Bender A, Schinke L, Sextro W. Remaining useful lifetime prediction based on adaptive failure thresholds. In: Beer M, Zio E, eds. Proceedings of the 29th European Safety and Reliability Conference (ESREL2019). ; 2019:1262-1269.
LibreCat | Download (ext.)
 
[161]
2019 | Conference Paper | LibreCat-ID: 13461 | OA
Kaul T, Bender A, Sextro W. Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems. In: Beer M, Zio E, eds. Proceedings of the 29th European Safety and Reliability Conference (ESREL2019). ; 2019:2340-2347.
LibreCat | Download (ext.)
 
[160]
2018 | Conference Paper | LibreCat-ID: 9987
Bender A, Sextro W. A particle filtering approach for temperature based prognostics. In: Safety and Reliability – Safe Societies in a Changing World. Trondheim, Norway; 2018:1025-1033.
LibreCat
 
[159]
2018 | Journal Article | LibreCat-ID: 9990
Dunst P, Bornmann P, Hemsel T, Littmann W, Sextro W. Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders. ACTUATOR 2018; 16th International Conference on New Actuators. 2018:142-145.
LibreCat
 
[158]
2018 | Journal Article | LibreCat-ID: 9991
Dunst P, Bornmann P, Hemsel T, Sextro W. Vibration-Assisted Handling of Dry Fine Powders. Actuators 2018, 7(2). 2018:1-11. doi:10.3390/act7020018
LibreCat | DOI
 
[157]
2018 | Conference Paper | LibreCat-ID: 9992
Dymel C, Eichwald P, Schemmel R, et al. Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process. In: (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany). ; 2018:1-6.
LibreCat
 
[156]
2018 | Conference Paper | LibreCat-ID: 9993
Dymel C, Schemmel R, Hemsel T, Sextro W, Brökelmann M, Hunstig M. Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding. In: (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan). ; 2018:41-44.
LibreCat
 
[155]
2018 | Book | LibreCat-ID: 9995
Meyer T, Kaul T, Kimotho JK, Sextro W. Steigerung Der Intelligenz Mechatronischer Systeme. Vol Steigerung der Verlässlichkeit technischer Systeme. Springer Nature Switzerland AG. Part of Springer Nature.; 2018:193-213.
LibreCat
 
[154]
2018 | Conference Paper | LibreCat-ID: 9997
Schemmel R, Althoff S, Sextro W, Unger A, Brökelmann M, Hunstig M. Effects of different working frequencies on the joint formation in copper wire bonding. In: CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018). Stuttgart, Germany; 2018:230-235.
LibreCat
 
[153]
2018 | Conference Paper | LibreCat-ID: 9998
Schemmel R, Hemsel T, Sextro W. Numerical and experimental investigations in ultrasonic heavy wire bonding. In: 6th European Conference on Computational Mechanics (ECCM 6). Glasgow, UK; 2018:1-12.
LibreCat
 
[152]
2018 | Conference Paper | LibreCat-ID: 9999
Unger A, Hunstig M, Meyer T, Brökelmann M, Sextro W. Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges. In: In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018. Vol Vol. 2018, No. 1, pp. 000572-000577. ; 2018. doi:10.4071/2380-4505-2018.1.000572
LibreCat | DOI
 
[151]
2017 | Conference Paper | LibreCat-ID: 23560
Hentze J, Kaul T, Gräßler I, Sextro W. Integrated modeling of behavior and reliability in system development. In: Maier A, Skec S, McKesson C, Van der Loos M, eds. ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB. Design Society; 2017:385-394.
LibreCat
 
[150]
2017 | Conference Paper | LibreCat-ID: 9969
Bender A, Kaul T, Sextro W. Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente. In: Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017; 2017:347-358.
LibreCat
 
[149]
2017 | Conference Paper | LibreCat-ID: 9970
Bender A, Kimotho JK, Kohl S, Sextro W, Reinke K. Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen. In: 15. Internationale Schienenfahrzeugtagung. ; 2017:123-125.
LibreCat
 
[148]
2017 | Conference Paper | LibreCat-ID: 9971
Bender A, Sextro W, Reinke K. Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen. In: VDI-Berichte 2301. ; 2017:49-60.
LibreCat
 
[147]
2017 | Journal Article | LibreCat-ID: 9972
Dunst P, Hemsel T, Sextro W. Analysis of pipe vibration in an ultrasonic powder transportationsystem. elsevier. 2017;Sensors and Actuators A 263:733-736.
LibreCat
 
[146]
2017 | Journal Article | LibreCat-ID: 9973
Eichwald P, Althoff S, Schemmel R, et al. Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design. IMAPSource. 2017;Vol. 2017, No. 1.
LibreCat
 
[145]
2017 | Conference Paper | LibreCat-ID: 9974
Hentze J, Kaul T, Grässler I, Sextro W. Integrated modeling og behavior and reliability in system development. In: ICED17, 21st International Conference on Enginieering Design. ; 2017:385-394.
LibreCat
 
[144]
2017 | Journal Article | LibreCat-ID: 9976
Kaul T, Meyer T, Sextro W. Formulation of reliability-related objective functions for design of intelligent mechatronic systems. SAGE Journals. 2017;Vol. 231(4):390-399. doi:10.1177/1748006X17709376
LibreCat | DOI
 
[143]
2017 | Conference Paper | LibreCat-ID: 9978
Kimotho JK, Sextro W, Hemsel T. Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing. In: IEEE Transactions on Reliability. ; 2017:1-10. doi:10.1109/TR.2017.2710260
LibreCat | DOI
 
[142]
2017 | Conference Paper | LibreCat-ID: 9982
Schemmel R, Hemsel T, Sextro W. MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall. In: 43. Deutsche Jahrestagung Für Akustik. Kiel 2017; 2017:611-614.
LibreCat
 
[141]
2017 | Conference Paper | LibreCat-ID: 9983
Schulze S, Sextro W, Kister K. Model based optimization of dynamics in adaptive headlamps. In: Proceedings of the 12th International Symposium on Automotive Lighting 2017. ; 2017.
LibreCat
 
[140]
2017 | Conference Paper | LibreCat-ID: 9985
Sextro W, Meyer T, Kaul T, Kimotho JK. Entwicklung verlässlicher, intelligenter Systeme. In: VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2017:17–30.
LibreCat
 
[139]
2016 | Conference Paper | LibreCat-ID: 9955
Althoff S, Meyer T, Unger A, Sextro W, Eacock F. Shape-Dependent Transmittable Tangential Force of Wire Bond Tools. In: IEEE 66th Electronic Components and Technology Conference. ; 2016:2103-2110. doi:10.1109/ECTC.2016.234
LibreCat | DOI
 
[138]
2016 | Journal Article | LibreCat-ID: 9957
Brökelmann M, Unger A, Meyer T, et al. Kupferbondverbindungen intelligent herstellen. wt-online. 2016;7/8:512-519.
LibreCat
 
[137]
2016 | Conference Paper | LibreCat-ID: 9958
Dunst P, Sextro W, Bornmann P, Hemsel T, Littmann W. Transportation of dry fine powders by coordinated friction manipulation. In: PAMM Proc. Appl. Math. Mech. 16. Braunschweig; 2016:635-636. doi:10.1002/pamm.201610306
LibreCat | DOI
 
[136]
2016 | Conference Paper | LibreCat-ID: 9960
Eichwald P, Unger A, Eacock F, et al. Micro Wear Modeling in Copper Wire Wedge Bonding. In: IEEE CPMT Symposium Japan, 2016. ; 2016.
LibreCat
 
[135]
2016 | Conference Paper | LibreCat-ID: 9961
Kaul T, Meyer T, Sextro W. Modeling of Complex Redundancy in Technical Systems with Bayesian Networks. In: Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016. ; 2016.
LibreCat
 
[134]
2016 | Conference Paper | LibreCat-ID: 9963
Kohl S, Sextro W, Schulze S. Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016. Cyberjaya, Malaysia, 2016; 2016:1-12.
LibreCat
 
[133]
2016 | Conference Paper | LibreCat-ID: 9964
Lessmeier C, Kimotho JK, Zimmer D, Sextro W. Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification. In: European Conference of the Prognostics and Health Management Society. ; 2016.
LibreCat
 
[132]
2016 | Conference Paper | LibreCat-ID: 9966
Meyer T, Unger A, Althoff S, et al. Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation. In: IEEE 66th Electronic Components and Technology Conference. ; 2016:622-628. doi:10.1109/ECTC.2016.215
LibreCat | DOI
 
[131]
2016 | Conference Paper | LibreCat-ID: 9967
Schulze S, Sextro W, Kohl S. Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016. ; 2016:1-11.
LibreCat
 
[130]
2016 | Conference Paper | LibreCat-ID: 9968
Unger A, Schemmel R, Meyer T, et al. Validated Simulation of the Ultrasonic Wire Bonding Process. In: Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016. IEEE CPMT Symposium Japan; 2016:251-254.
LibreCat
 
[129]
2015 | Conference Paper | LibreCat-ID: 9943
Althoff S, Unger A, Sextro W, Eacock F. Improving the cleaning process in copper wire bonding by adapting bonding parameters. In: 2015 17th Electronics Packaging Technology Conference. ; 2015:1-6. doi:10.1109/EPTC.2015.7412402
LibreCat | DOI
 
[128]
2015 | Journal Article | LibreCat-ID: 9944
Bornmann P, Hemsel T, Sextro W, Memoli G, Hodnett M, Zeqiri B. Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler. tm - Technisches Messen. 2015;82(2):73-84. doi:10.1515/teme-2015-0017
LibreCat | DOI
 
[127]
2015 | Conference Paper | LibreCat-ID: 9945
Kaul T, Meyer T, Sextro W. Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme. In: Gausemeier J, Dumitrescu R, Rammig F, Schäfer W, Trächtler A, eds. 10. Paderborner Workshop Entwurf Mechatronischer Systeme. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2015:101-112.
LibreCat
 
[126]
2015 | Conference Paper | LibreCat-ID: 9946
Kaul T, Meyer T, Sextro W. Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems. In: et al.} P, ed. European Safety and Reliability Conference (ESREL2015). London: Taylor and Francis; 2015. doi:10.1201/b19094-290
LibreCat | DOI
 
[125]
2015 | Conference Paper | LibreCat-ID: 9947
Kimotho JK, Sextro W. Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics. In: Annual Conference of the Prognostics and Health Management Society 2015. Vol 6. ; 2015.
LibreCat
 
[124]
2015 | Conference Paper | LibreCat-ID: 9949
Meyer T, Kaul T, Sextro W. Advantages of reliability-adaptive system operation for maintenance planning. In: Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes. ; 2015:940-945. doi:10.1016/j.ifacol.2015.09.647
LibreCat | DOI
 
[123]
2015 | Conference Paper | LibreCat-ID: 9950
Meyer T, Kimotho JK, Sextro W. Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme. In: 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2015:111-122.
LibreCat
 
[122]
2015 | Conference Paper | LibreCat-ID: 9951
Meyer T, Unger A, Althoff S, et al. Modeling and simulation of the ultrasonic wire bonding process. In: 2015 17th Electronics Packaging Technology Conference. ; 2015. doi:10.1109/EPTC.2015.7412377
LibreCat | DOI
 
[121]
2015 | Conference Paper | LibreCat-ID: 9952
Schulte F, Neuhaus J, Sextro W. A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties. In: Proceedings of ICoEV 2015 International Conference on Engineering Vibration. ; 2015:1109-1117.
LibreCat
 
[120]
2015 | Conference Paper | LibreCat-ID: 9954
Unger A, Sextro W, Meyer T, et al. Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear. In: 2015 17th Electronics Packaging Technology Conference. ; 2015. doi:10.1109/EPTC.2015.7412375
LibreCat | DOI
 
[119]
2014 | Book | LibreCat-ID: 25168
Gausemeier J, Rammig F-J, Schäfer W, Sextro W. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag; 2014.
LibreCat
 
[118]
2014 | Book Chapter | LibreCat-ID: 25173
Dellnitz M, Flaßkamp K, Hartmann P, et al. Self-optimizing Mechatronic Systems. In: Dependability of Self-Optimizing Mechatronic Systems, Kapitel: 1.1. Springer-Verlag; 2014:3-12.
LibreCat
 
[117]
2014 | Book Chapter | LibreCat-ID: 28394
Dorociak R, Gausemeier J, Iwanek P, Meyer T, Sextro W, Sondermann-W{\"o}lke C. Development of the Active Guidance Module. In: Dependability of Self-Optimizing Mechatronic Systems. AACE Press; 2014:178-182.
LibreCat
 
[116]
2014 | Book | LibreCat-ID: 28396
Gausemeier J, Rammig F-J, Sch{\"a}fer Wilhelm, Sextro W. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2014.
LibreCat
 
[115]
2014 | Book Chapter | LibreCat-ID: 28399
Dorociak R, Gausemeier J{\"u}rgen, Iwanek Peter, Meyer T, Sextro W. Selecting Suitable Methods Using the Methodology. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag Berlin Heidelberg; 2014:174-178.
LibreCat
 
[114]
2014 | Book Chapter | LibreCat-ID: 28400
Dorociak R, Gausemeier J, Iwanek P, Meyer T, Sextro W. Selecting Suitable Methods Using the Methodology. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag Berlin Heidelberg; 2014:174-178.
LibreCat
 
[113]
2014 | Book Chapter | LibreCat-ID: 28410
Iwanek P, Meyer T, Priesterjahn C, Sextro W, Va{\ss}holz M. Challenges. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2014:12-15.
LibreCat
 
[112]
2014 | Conference Paper | LibreCat-ID: 9868
Althoff S, Neuhaus J, Hemsel T, Sextro W. Improving the bond quality of copper wire bonds using a friction model approach. In: Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th. ; 2014:1549-1555. doi:10.1109/ECTC.2014.6897500
LibreCat | DOI
 
[111]
2014 | Conference Paper | LibreCat-ID: 9869
Bornmann P, Hemsel T, Sextro W, Memoli G, Hodnett M, Zeqiri B. Self-Sensing Ultrasound Transducer for Cavitation Detection. In: 2014 IEEE International Ultrasonics Symposium Proceedings. ; 2014:663-666. doi:10.1109/ULTSYM.2014.0163
LibreCat | DOI
 
[110]
2014 | Conference Paper | LibreCat-ID: 9871
Eichwald P, Sextro W, Althof S, et al. Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding. In: Proceedings of the 47th International Symposium on Microelectronics. ; 2014:856-861. doi:10.4071/isom-THP34
LibreCat | DOI
 
[109]
2014 | Book | LibreCat-ID: 9873
Gausemeier J, Josef Rammig F, Schäfer W, Sextro W. Dependability of Self-Optimizing Mechatronic Systems. Vol Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg; 2014.
LibreCat
 
[108]
2014 | Journal Article | LibreCat-ID: 9874
Hemsel T, Bornmann P, Morita T, Sondermann-Wölke C, Sextro W. Reliability analysis of ultrasonic power transducers. Archive of Applied Mechanics. 2014:1-7. doi:10.1007/s00419-014-0965-4
LibreCat | DOI
 
[107]
2014 | Journal Article | LibreCat-ID: 9876
Hunstig M, Hemsel T, Sextro W. High-velocity operation of piezoelectric inertia motors: experimental validation. Archive of Applied Mechanics. 2014:1-9. doi:10.1007/s00419-014-0940-0
LibreCat | DOI
 
[106]
2014 | Conference Paper | LibreCat-ID: 9879
Kimotho JK, Meyer T, Sextro W. PEM fuel cell prognostics using particle filter with model parameter adaptation. In: Prognostics and Health Management (PHM), 2014 IEEE Conference On. ; 2014:1-6. doi:10.1109/ICPHM.2014.7036406
LibreCat | DOI
 
[105]
2014 | Conference Paper | LibreCat-ID: 9880
Kimotho JK, Sextro W. An approach for feature extraction and selection from non-trending data for machinery prognosis. In: Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014. Vol 5. ; 2014.
LibreCat
 
[104]
2014 | Journal Article | LibreCat-ID: 9881
Kimotho JK, Sextro W. Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation. PAMM. 2014;14(1):815-816. doi:10.1002/pamm.201410388
LibreCat | DOI
 
[103]
2014 | Journal Article | LibreCat-ID: 9882
Kohl S, Sextro W, Zuber A. Tire footprint analysis depending on the elastokinematics of a multi-link suspension system using multi-body dynamics simulation. PAMM. 2014;14(1):65-66. doi:10.1002/pamm.201410020
LibreCat | DOI
 
[102]
2014 | Book Chapter | LibreCat-ID: 9883
Meyer T, Priesterjahn C, Sextro W. Conclusion and Outlook. In: Gausemeier J, Josef Rammig F, Schäfer W, Sextro W, eds. Dependability of Self-Optimizing Mechatronic Systems. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg; 2014:189-190. doi:10.1007/978-3-642-53742-4_5
LibreCat | DOI
 
[101]
2014 | Journal Article | LibreCat-ID: 9885
Meyer T, Sondermann-Wölke C, Sextro W. Method to Identify Dependability Objectives in Multiobjective Optimization Problem. Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence. 2014;15:46-53. doi:10.1016/j.protcy.2014.09.033
LibreCat | DOI
 
[100]
2014 | Conference Paper | LibreCat-ID: 9887
Neuhaus J, Sextro W. Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements. In: Liu GR, Guan ZW, eds. Proceedings of the 5th International Conference on Computational Methods. ScienTech Publisher; 2014.
LibreCat
 
[99]
2014 | Journal Article | LibreCat-ID: 9888
Schulze S, Sextro W, Grüter F. Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications. PAMM. 2014;14(1):39-40. doi:10.1002/pamm.201410012
LibreCat | DOI
 
[98]
2014 | Conference Paper | LibreCat-ID: 9889
Sprock C, Sextro W. Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending. In: Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International. ; 2014:320-324. doi:10.1109/I2MTC.2014.6860760
LibreCat | DOI
 
[97]
2014 | Conference Paper | LibreCat-ID: 9890
Sprock C, Sextro W. Time-efficient analysis of nonlinear dynamic behavior. In: Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1,. ; 2014:293-294.
LibreCat
 
[96]
2014 | Conference Paper | LibreCat-ID: 9891
Sprock C, Sextro W. Time-efficient analysis of nonlinear peak bending behavior. In: Proceedings of ISMA - International Conference of Noise and Vibration. 2014. ; 2014:1-8.
LibreCat
 
[95]
2014 | Conference Paper | LibreCat-ID: 9892
Sprock C, Sextro W. Vibration Analysis of Mechanical Structures using Multisine Excitation Techniques. In: Proceedings of 31st Danubia-Adria Symposium. 2014. ; 2014.
LibreCat
 
[94]
2014 | Book Chapter | LibreCat-ID: 9893
Trächtler A, Hölscher C, Rasche C, et al. Introduction to Self-optimization and Dependability. In: Gausemeier J, Josef Rammig F, Schäfer W, Sextro W, eds. Dependability of Self-Optimizing Mechatronic Systems. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg; 2014:1-24. doi:10.1007/978-3-642-53742-4_1
LibreCat | DOI
 
[93]
2014 | Book Chapter | LibreCat-ID: 9894
Trächtler A, Kleinjohann B, Heinzemann C, et al. Case Study. In: Gausemeier J, Josef Rammig F, Schäfer W, Sextro W, eds. Dependability of Self-Optimizing Mechatronic Systems. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg; 2014:173-188. doi:10.1007/978-3-642-53742-4_4
LibreCat | DOI
 
[92]
2014 | Conference Paper | LibreCat-ID: 9895
Unger A, Sextro W, Althoff S, et al. Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds. In: Proceedings of the 47th International Symposium on Microelectronics (IMAPS). San Diego, CA, US; 2014:289-294.
LibreCat
 
[91]
2014 | Conference Paper | LibreCat-ID: 9896
Unger A, Sextro W, Althoff S, et al. Data-driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding. In: Proceedings of 8th International Conference on Integrated Power Electronic Systems. Vol 141. ; 2014:175-180.
LibreCat
 
[90]
2013 | Conference Paper | LibreCat-ID: 26973
Meyer T, Kessler JH, Sextro W, Trächtler A. Increasing Intelligent Systems’ Reliability by using Reconfiguration. In: The Annual Reliability and Maintainability Symposium (RAMS). ; 2013.
LibreCat
 
[89]
2013 | Book Chapter | LibreCat-ID: 23139
Kessler JH, Meyer T, Sextro W, Sondermann-Wölke C, Trächtler A. Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2013:55-62.
LibreCat
 
[88]
2013 | Conference Paper | LibreCat-ID: 23140
Meyer T, Kessler JH, Sextro W, Trächtler A. Increasing Intelligent Systems’ Reliability by using Reconfiguration. In: The Annual Reliability and Maintainability Symposium (RAMS). ; 2013.
LibreCat
 
[87]
2013 | Book Chapter | LibreCat-ID: 23149
Hölscher C, Kessler JH, Meyer T, et al. Applications of Self-Optimizing Systems. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2013:16-22.
LibreCat
 
[86]
2013 | Journal Article | LibreCat-ID: 9794
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Increasing the power of piezoelectric energy harvesters by magnetic stiffening. Journal of Intelligent Material Systems and Structures. 2013;24(11):1332-1342. doi:10.1177/1045389X13483021
LibreCat | DOI
 
[85]
2013 | Journal Article | LibreCat-ID: 9795
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments. Sensors and Actuators A: Physical. 2013;200:138-146. doi:10.1016/j.sna.2013.01.008
LibreCat | DOI
 
[84]
2013 | Conference Paper | LibreCat-ID: 9796
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems. In: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013. Berichte aus dem IDS. Hannover, Germany; 2013:159-161.
LibreCat
 
[83]
2013 | Conference Paper | LibreCat-ID: 9797
Althoff S, Neuhaus J, Hemsel T, Sextro W. A friction based approach for modeling wire bonding. In: IMAPS 2013, 46th International Symposium on Microelectronics. Orlando (Florida), USA; 2013. doi:10.4071/isom-2013-TA67
LibreCat | DOI
 
[82]
2013 | Conference Paper | LibreCat-ID: 9799
Eichwald P, Sextro W, Althoff S, et al. Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding. In: 15th Electronics Packaging Technology Conference. ; 2013. doi:10.1109/EPTC.2013.6745803
LibreCat | DOI
 
[81]
2013 | Conference Paper | LibreCat-ID: 9801
Hunstig M, Al-Ashtari W, Hemsel T, Sextro W. Leistungs- und Bandbreitensteigerung von Energy-Harvesting-Generatoren für Energieautarke Systeme. In: Gausemeier J, Dumitrescu R, Rammig F, Schäfer W, Trächtler A, eds. 9. Paderborner Workshop Entwurf Mechatronischer Systeme. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2013:359-372.
LibreCat
 
[80]
2013 | Conference Paper | LibreCat-ID: 9802
Hunstig M, Hemsel T, Sextro W. High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation. In: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop. Hannover, Germany; 2013:16-18.
LibreCat
 
[79]
2013 | Journal Article | LibreCat-ID: 9803
Hunstig M, Hemsel T, Sextro W. Modelling the friction contact in an inertia motor. Journal of Intelligent Material Systems and Structures. 2013;24(11):1380-1391. doi:10.1177/1045389X12474354
LibreCat | DOI
 
[78]
2013 | Journal Article | LibreCat-ID: 9804
Hunstig M, Hemsel T, Sextro W. Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation. Sensors and Actuators A: Physical. 2013;200:79-89. doi:10.1016/j.sna.2012.11.043
LibreCat | DOI
 
[77]
2013 | Journal Article | LibreCat-ID: 9805
Hunstig M, Hemsel T, Sextro W. Stick-slip and slip-slip operation of piezoelectric inertia drives - Part I: Ideal Excitation. Sensors and Actuators A: Physical. 2013;200:90-100. doi:10.1016/j.sna.2012.11.012
LibreCat | DOI
 
[76]
2013 | Journal Article | LibreCat-ID: 9807
Kimotho JK, Sondermann-Wölke C, Meyer T, Sextro W. Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization. Chemical Engineering Transactions. 2013;33:619-624. doi:10.3303/CET1333104
LibreCat | DOI
 
[75]
2013 | Journal Article | LibreCat-ID: 9808
Kimotho JK, Sondermann-Wölke C, Meyer T, Sextro W. Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation. International Journal of Prognostics and Health Management. 2013;4(2).
LibreCat
 
[74]
2013 | Conference Paper | LibreCat-ID: 9855
Kohl S, Zuber A, Sextro W. Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems. In: Proc. Appl. Math. Mech. Vol 13. ; 2013:23-24. doi:10.1002/pamm.201310007
LibreCat | DOI
 
[73]
2013 | Conference Paper | LibreCat-ID: 9858
Meyer T, Hölscher C, Menke M, Sextro W, Zimmer D. Multiobjective Optimization including Safety of Operation Applied to a Linear Drive System. In: Proc. Appl. Math. Mech. Vol 13. ; 2013:483-484. doi:10.1002/pamm.201310234
LibreCat | DOI
 
[72]
2013 | Conference Paper | LibreCat-ID: 9859
Meyer T, Henning Keßler J, Sextro W, Trächtler A. Increasing Intelligent Systems’ Reliability by Using Reconfiguration. In: Proceedings of the Annual Reliability and Maintainability Symposium (RAMS). Orlando, FL; 2013. doi:10.1109/RAMS.2013.6517636
LibreCat | DOI
 
[71]
2013 | Journal Article | LibreCat-ID: 9860
Meyer T, Sondermann-Wölke C, Kimotho JK, Sextro W. Controlling the Remaining Useful Lifetime using Self-Optimization. Chemical Engineering Transactions. 2013;33:625-630. doi:10.3303/CET1333105
LibreCat | DOI
 
[70]
2013 | Conference Paper | LibreCat-ID: 9861
Meyer T, Sondermann-Wölke C, Sextro W, Riedl M, Gouberman A, Siegle M. Bewertung der Zuverlässigkeit selbstoptimierender Systeme mit dem LARES-Framework. In: Gausemeier J, Dumitrescu R, Rammig F, Schäfer W, Trächtler A, eds. 9. Paderborner Workshop Entwurf Mechatronischer Systeme. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2013:161-174.
LibreCat
 
[69]
2012 | Journal Article | LibreCat-ID: 9781
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Frequency tuning of piezoelectric energy harvesters by magnetic force. Smart Materials and Structures. 2012;21(3):035019.
LibreCat
 
[68]
2012 | Journal Article | LibreCat-ID: 9782
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Analytical determination of characteristic frequencies and equivalent circuit parameters of a piezoelectric bimorph. Journal of Intelligent Material Systems and Structures. 2012;23(1):15-23. doi:10.1177/1045389X11430742
LibreCat | DOI
 
[67]
2012 | Conference Paper | LibreCat-ID: 9783
Bornmann P, Hemsel T, Sextro W, Maeda T, Morita T. Non-perturbing cavitation detection / monitoring in sonochemical reactors. In: Ultrasonics Symposium (IUS), 2012 IEEE International. ; 2012:1141-1144. doi:10.1109/ULTSYM.2012.0284
LibreCat | DOI
 
[66]
2012 | Conference Paper | LibreCat-ID: 9787
Kohl S, Sextro W, Zuber A. Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie. In: 8. Tag Des Fahrwerks, Aachen, 2012. Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen; 2012:38-60.
LibreCat
 
[65]
2012 | Conference Paper | LibreCat-ID: 9791
Sondermann-Wölke C, Meyer T, Dorociak R, Gausemeier J, Sextro W. Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution. In: Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012). Helsinki, Finland; 2012.
LibreCat
 
[64]
2012 | Journal Article | LibreCat-ID: 9806
Hunstig M, Hemsel T, Sextro W. Analysis of different operation modes for inertia motors. ACTUATOR 2012 Conference Proceedings. 2012:761-764.
LibreCat
 
[63]
2011 | Conference Paper | LibreCat-ID: 26981
Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: Technische Zuverlässigkeit –TTZ. ; 2011.
LibreCat
 
[62]
2011 | Conference Paper | LibreCat-ID: 23184
Lurye O, Sondermann-Wölke C, Kromov I, Sextro W, Trächtler A. Verlässlichkeitsanalyse des Degradationsverhaltens mechatronischer Systeme mit mehreren Betriebsstrategien. In: VDI Bericht Zur Tagung Technische Zuverlässigkeit. Leonberg: VDI-Verlag; 2011.
LibreCat
 
[61]
2011 | Conference Paper | LibreCat-ID: 23194
Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: Technische Zuverlässigkeit TTZ. ; 2011.
LibreCat
 
[60]
2011 | Conference Paper | LibreCat-ID: 9768
Lurie O, Kromov I, Trächtler A, Sondermann-Wölke C, Sextro W. Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies. In: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2011:99-110.
LibreCat
 
[59]
2011 | Conference Paper | LibreCat-ID: 9771
Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2011:291-302.
LibreCat
 
[58]
2011 | Journal Article | LibreCat-ID: 9772
Tomberger C, Dietmaier P, Sextro W, Six K. Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature. Wear. 2011;271:2-12. doi:10.1016/j.wear.2010.10.025
LibreCat | DOI
 
[57]
2011 | Patent | LibreCat-ID: 9790
Sextro W, Hunstig M, Bornmann P, Hemsel T. Patent DE10201003395: Anordnung und Verfahren zur mehrdimensionalen Messung von Schwingungen eines Objekts. . Published online 2011.
LibreCat
 
[56]
2010 | Journal Article | LibreCat-ID: 9747
Hölzl JS, Sextro W. Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen. PAMM. 2010;10(1):247-248. doi:10.1002/pamm.201010116
LibreCat | DOI
 
[55]
2010 | Journal Article | LibreCat-ID: 9748
Hölzl JS, Sextro W. Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces. SAE International Journal of Passenger Cars- Mechanical Systems. 2010:929-935. doi:10.4271/2010-01-1422
LibreCat | DOI
 
[54]
2010 | Conference Paper | LibreCat-ID: 9753
Hunstig M, Hemsel T, Sextro W. Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren. In: Gausemeier J, Rammig F, Schäfer W, Trächtler A, eds. 7. Paderborner Workshop Entwurf Mechatronischer Systeme. Vol 272. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2010:129-141.
LibreCat
 
[53]
2010 | Conference Paper | LibreCat-ID: 9754
Hunstig M, Hemsel T, Sextro W. Improving the Performance of Piezoelectric Inertia Motors. In: ACTUATOR 2010 Conference Proceedings. ; 2010:657-661.
LibreCat
 
[52]
2010 | Conference Paper | LibreCat-ID: 9760
Sondermann-Wölke C, Hemsel T, Sextro W, Gausemeier J, Pook S. Guideline for the dependability-oriented design of self-optimizing systems. In: Industrial Informatics (INDIN), 2010 8th IEEE International Conference On. ; 2010:739-744. doi:10.1109/INDIN.2010.5549490
LibreCat | DOI
 
[51]
2010 | Journal Article | LibreCat-ID: 9761
Sondermann-Wölke C, Sextro W. Integration of Condition Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance Module. International Journal On Advances in Intelligent Systems. 2010;3(1-3):65-74.
LibreCat
 
[50]
2010 | Conference Paper | LibreCat-ID: 9762
Sondermann-Wölke C, Sextro W, Geisler J, Trächtler A. Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls. In: Gausemeier J, Rammig FJ, Trächtler A, eds. Entwurf Mechatronischer Systeme. Vol 272. HNI-Verlagsschriftenreihe. Paderborn; 2010:411-420.
LibreCat
 
[49]
2010 | Conference Paper | LibreCat-ID: 9763
Sondermann-Wölke C, Geisler J, Sextro W. Increasing the reliability of a self-optimizing railway guidance system. In: Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual. ; 2010:1-6. doi:10.1109/RAMS.2010.5448080
LibreCat | DOI
 
[48]
2010 | Journal Article | LibreCat-ID: 9764
Tomberger C, Dietmaier P, Martin R, Sextro W, Six K. Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den Kraftschluss zwischen Rad und Schiene. ZEVrail. 2010;134:127-135.
LibreCat
 
[47]
2009 | Conference Paper | LibreCat-ID: 9742
Sondermann-Wölke C, Sextro W. Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules. In: Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World: ; 2009:15-20. doi:10.1109/ComputationWorld.2009.47
LibreCat | DOI
 
[46]
2007 | Conference Paper | LibreCat-ID: 9560
Tonchev A, Hirschberg W, Sextro W, Major Z, Neges J. Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe. In: 27. Internationales Mju-Symposium/Bremsen-Fachtagung. 12. Bad Neuenahr: VDI Verlag GmbH; 2007:29-49.
LibreCat
 
[45]
2007 | Conference Paper | LibreCat-ID: 9561
Tonchev A, Hirschberg W, Sextro W, Major Z, Neges J. Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc. In: 27. Internationales Mju-Symposium/Bremsen-Fachtagung. 12. Bad Neuenahr: VDI Verlag GmbH; 2007:144-163.
LibreCat
 
[44]
2007 | Conference Paper | LibreCat-ID: 9563
Genzo A, Sextro W, Panning L. Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten. In: VDI-Berichte. Vol 2022. Düsseldorf: VDI Verlag GmbH; 2007:147-161.
LibreCat
 
[43]
2007 | Journal Article | LibreCat-ID: 9567
Szwedowicz J, Visser R, Sextro W, Masserey PA. On Nonlinear Forced Vibration of Shrouded Turbine Blades. Journal of Turbomachinery. 2007;130(1):011002-011002.
LibreCat
 
[42]
2006 | Conference Paper | LibreCat-ID: 9535
Genzo A, Sextro W. Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts. In: Proceedings of ISMA - International Conference on Noise and Vibration Engineering. ; 2006:51-52.
LibreCat
 
[41]
2006 | Book Chapter | LibreCat-ID: 9536
Gutzeit F, Sextro W, Kröger M. Unsteady rolling contact of rubber wheels. In: Wriggers P, Nackenhorst U, eds. Analysis and Simulation of Contact Problems. Vol 27. Lecture Notes in Applied and Computational Mechanics. Springer Berlin Heidelberg; 2006:261-270. doi:10.1007/3-540-31761-9_29
LibreCat | DOI
 
[40]
2006 | Conference Paper | LibreCat-ID: 9542
Hofmeisterro A, Sextro W, Röschel O. Error-Workspace Analysis of Plane Mechanisms. In: Proceedings of EUCOMES, the First European Conference on Mechanism Science. Obergurgl, {\"O}sterreich; 2006:1-12.
LibreCat
 
[39]
2006 | Book Chapter | LibreCat-ID: 9551
Sextro W, Moldenhauer P, Wangenheim M, Lindner M, Kröger M. Contact behaviour of a sliding rubber element. In: Wriggers P, Nackenhorst U, eds. Analysis and Simulation of Contact Problems. Vol 27. Lecture Notes in Applied and Computational Mechanics. Springer Berlin Heidelberg; 2006:243-252. doi:10.1007/3-540-31761-9_27
LibreCat | DOI
 
[38]
2005 | Journal Article | LibreCat-ID: 9266
Genzo A, Sextro W, Popp K. Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts. PAMM. 2005;5(1):91-92. doi:10.1002/pamm.200510026
LibreCat | DOI
 
[37]
2005 | Journal Article | LibreCat-ID: 9526
Genzo A, Sextro W, Popp K. Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts. PAMM. 2005;5(1):91-92. doi:10.1002/pamm.200510026
LibreCat | DOI
 
[36]
2005 | Journal Article | LibreCat-ID: 9529
Hofmeister A, Sextro W, Röschel O. Unkontrollierbare Bewegungen ebener Mechanismen mit Gelenkspiel. PAMM. 2005;5(1):201-202. doi:10.1002/pamm.200510078
LibreCat | DOI
 
[35]
2004 | Conference Paper | LibreCat-ID: 8952
Götting F, Sextro W, Panning L, Popp K. Systematic mistuning of bladed disk assemblies with friction contacts. In: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Vol 6. ; 2004:257-267.
LibreCat
 
[34]
2004 | Journal Article | LibreCat-ID: 9520
Lindner M, Sextro W, Popp K. Hysteretic Friction of a Sliding Rubber Element. PAMM. 2004;4(1):101-102. doi:10.1002/pamm.200410032
LibreCat | DOI
 
[33]
2004 | Conference Paper | LibreCat-ID: 9523
Panning L, Popp K, Sextro W, Götting F. Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application. In: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Vol 6. Vienna, Austria; 2004:269-280. doi:10.1115/GT2004-53316
LibreCat | DOI
 
[32]
2003 | Conference Paper | LibreCat-ID: 8933
Götting F, Sextro W, Panning L, Popp K. Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen. In: Irretier H, Nordmann R, Springer H, eds. Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Darmstadt. Vieweg-Verlag; 2003:201-210.
LibreCat
 
[31]
2003 | Journal Article | LibreCat-ID: 8934
Genzo A, Sextro W, Popp K. Erzwungene Schwingungen von elastischen Mehrkörpersystemen mit Reibkontakten. PAMM. 2003;2(1):120-121. doi:10.1002/pamm.200310046
LibreCat | DOI
 
[30]
2003 | Journal Article | LibreCat-ID: 8937
Panning L, Sextro W, Popp K. Design of Friction Dampers for Mistuned Bladed Disks. PAMM. 2003;3(1):118-119. doi:10.1002/pamm.200310336
LibreCat | DOI
 
[29]
2003 | Journal Article | LibreCat-ID: 8938
Panning L, Sextro W, Popp K. Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers. International Journal of Rotating Machinery. 2003;9(3):219-228.
LibreCat
 
[28]
2003 | Journal Article | LibreCat-ID: 8939
Popp K, Panning L, Sextro W. Vibration Damping by Friction Forces -Theory and Applications. Journal of Vibration and Control. 2003;9:419-448.
LibreCat
 
[27]
2003 | Conference Paper | LibreCat-ID: 8940
Sextro W, Popp K. Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen am Beispiel von Turbomaschinenschaufeln. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW). Frankfurt am Main, Germany; 2003:40.
LibreCat
 
[26]
2003 | Conference Paper | LibreCat-ID: 8941
Szwedowicz J, Sextro W, Visser R, Masserey P. On forced vibration of shrouded turbine blades. In: ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference. Atlanta, Georgia, USA; 2003. doi:doi:10.1115/GT2003-38808
LibreCat | DOI
 
[25]
2002 | Conference Paper | LibreCat-ID: 8928
Panning L, Sextro W, Popp K. Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with respect to Friction Damping. In: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande; 2002.
LibreCat
 
[24]
2002 | Conference Paper | LibreCat-ID: 8929
Panning L, Sextro W, Popp K. Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers. In: Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC. Honolulu, Hawaii, USA; 2002.
LibreCat
 
[23]
2002 | Conference Paper | LibreCat-ID: 8931
Sextro W, Panning L, Götting F. Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts. In: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande; 2002.
LibreCat
 
[22]
2002 | Conference Paper | LibreCat-ID: 8932
Sextro W, Popp K. Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen. Frankfurt am Main, Germany; 2002:157-183.
LibreCat
 
[21]
2001 | Conference Paper | LibreCat-ID: 8921
Panning L, Sextro W, Popp K. Schwingungsanalyse verstimmter Schaufelkränze mit Reibelementen. In: Irretier H, Nordmann R, Springer H, eds. Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Wien. Vieweg-Verlag; 2001:297-306.
LibreCat
 
[20]
2001 | Journal Article | LibreCat-ID: 8922
Sextro W. Heat and Wear Generation for Rolling Contacts. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM). 2001;81:225-226.
LibreCat
 
[19]
2001 | Conference Paper | LibreCat-ID: 8923
Sextro W. Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction. In: ASME Design Engineering Technical Conferences. Pittsburgh, Pennsylvania, USA; 2001:1-12.
LibreCat
 
[18]
2001 | Journal Article | LibreCat-ID: 8924
Sextro W, Popp K, Krzyzynski T. Localization in Nonlinear Mistuned Systems with Cyclic Symmetry. Nonlinear Dynamics. 2001;25(1-3):207-220. doi:10.1023/A:1012915002568
LibreCat | DOI
 
[17]
2000 | Journal Article | LibreCat-ID: 8918
Krzyzynski T, Popp K, Sextro W. On some regularities in dynamic response of cyclic periodic structures. Chaos, Solitons \& Fractals. 2000;11(10):1597-1609. doi:10.1016/S0960-0779(99)00080-6
LibreCat | DOI
 
[16]
2000 | Conference Paper | LibreCat-ID: 8919
Panning L, Sextro W, Popp K. Optimization of Interblade Friction Damper. In: International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME. Munich, Germany; 2000:1-8.
LibreCat
 
[15]
2000 | Conference Paper | LibreCat-ID: 8920
Sextro W. The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification. In: International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME. Munich, Germany; 2000:1-8.
LibreCat
 
[14]
1999 | Conference Paper | LibreCat-ID: 8909
Popp K, Sextro W. Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen. Heidelberg; 1999:21-38.
LibreCat
 
[13]
1999 | Conference Paper | LibreCat-ID: 8910
Sextro W. Experimental verification of a non-Hertzian contact model. In: International Conference on Computational Methods in Contact Mechanics. ; 1999:181-190.
LibreCat
 
[12]
1999 | Conference Paper | LibreCat-ID: 8911
Sextro W. Forced Vibration of Elastic Structures with Friction Contacts. In: ASME Design Engineering Technical Conferences. Las Vegas, Nevada, USA; 1999:1-10.
LibreCat
 
[11]
1999 | Journal Article | LibreCat-ID: 8912
Sextro W, Popp K. Ein ebenes Reibkontaktmodell zur Berechnung von Schaufelschwingungen mit Reibelementen. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM). 1999;79:311-312.
LibreCat
 
[10]
1999 | Conference Paper | LibreCat-ID: 8913
Sextro W, Popp K. Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW). Frankfurt am Main, Germany; 1999:56.
LibreCat
 
[9]
1998 | Conference Paper | LibreCat-ID: 8907
Sextro W, Popp K, Wolter I. Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers. In: International Congress on Combustion Engines, Proceedings of the 22nd CIMAC. Vol 1. Kopenhagen, D{\"a}nemark; 1998:257-270.
LibreCat
 
[8]
1998 | Conference Paper | LibreCat-ID: 8908
Sextro W, Popp K, Wolter I. Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers. In: The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7. Vol B. Honolulu, Hawaii, USA; 1998:621-630.
LibreCat
 
[7]
1997 | Conference Paper | LibreCat-ID: 8902
Popp K, Sextro W. Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen. Frankfurt am Main, Germany; 1997:131-142.
LibreCat
 
[6]
1997 | Conference Paper | LibreCat-ID: 8903
Sextro W. Schwingungsverhalten von Schaufelkränzen mit Reibelementen bei Frequenzverstimmung. In: VDI-Reihe. Vol 11. VDI-Verlag, Düsseldorf; 1997.
LibreCat
 
[5]
1997 | Conference Paper | LibreCat-ID: 8904
Sextro W, Popp K, Wolter I. Improved reliability of bladed disks due to friction dampers. In: The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition. ; 1997.
LibreCat
 
[4]
1996 | Conference Paper | LibreCat-ID: 8896
Popp K, Sextro W. Schwingungsverhalten eines Schaufelkranzes mit Reibelementen bei Frequenzverstimmung. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen. Frankfurt am Main, Germany; 1996:53-76.
LibreCat
 
[3]
1996 | Conference Paper | LibreCat-ID: 8897
Popp K, Sextro W. Dynamical Behaviour of a Bladed Disk with Friction Dampers. In: The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH. Vol 1. Prag; 1996:157-183.
LibreCat
 
[2]
1993 | Journal Article | LibreCat-ID: 8895
Sextro W, Schmalhorst B. Static Behaviour of Drill Strings in Curved Boreholes. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM). 1993;73:255-257.
LibreCat
 
[1]
1991 | Book Chapter | LibreCat-ID: 8894
Stelter P, Sextro W. Bifurcations in Dynamic Systems with Dry Friction. In: Seydel R, Schneider FW, Küpper T, Troger H, eds. Bifurcation and Chaos: Analysis, Algorithms, Applications. Vol 97. International Series of Numerical Mathematics / Internationale Schriftenreihe zur Numerischen Mathematik / S{\’e}rie Internationale d’Analyse Num{\’e}rique. Birkhäuser Basel; 1991:343-347. doi:10.1007/978-3-0348-7004-7_44
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed

198 Publications

Mark all

[198]
2024 | Journal Article | LibreCat-ID: 51518
Aimiyekagbon OK, Bender A, Hemsel T, Sextro W. Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions. Electronics. 2024;13(3). doi:10.3390/electronics13030521
LibreCat | DOI
 
[197]
2023 | Conference Paper | LibreCat-ID: 46813 | OA
Wohlleben MC, Muth L, Peitz S, Sextro W. Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits. In: Proceedings in Applied Mathematics and Mechanics. Wiley; 2023. doi:10.1002/pamm.202300039
LibreCat | DOI | Download (ext.)
 
[196]
2023 | Conference Paper | LibreCat-ID: 47116 | OA
Aimiyekagbon OK, Löwen A, Bender A, Muth L, Sextro W. Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System. In: Proceedings of the Asia Pacific Conference of the PHM Society 2023 . Vol 4. ; 2023. doi:10.36001/phmap.2023.v4i1.3596
LibreCat | DOI | Download (ext.)
 
[195]
2023 | Conference Abstract | LibreCat-ID: 51117
Scheidemann C, Hemsel T, Friesen O, Claes L, Sextro W. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. In: ; 2023.
LibreCat
 
[194]
2023 | Conference Abstract | LibreCat-ID: 51118
Scheidemann C, Hemsel T, Friesen O, Claes L, Sextro W. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. In: ; 2023.
LibreCat
 
[193]
2023 | Conference Abstract | LibreCat-ID: 51119
Scheidemann C, Hagedorn OEC, Hemsel T, Sextro W. Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. In: ; 2023.
LibreCat
 
[192]
2023 | Book Chapter | LibreCat-ID: 51338
Schütte J, Sextro W. Einfluss der Radhubkinematik auf den Reifenverschleiß. In: 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn. Vol 2425. VDI-Berichte. VDI Verlag GmbH; 2023:165-180.
LibreCat
 
[191]
2022 | Conference Paper | LibreCat-ID: 29934
Muth L, Noll C, Sextro W. Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data. In: Orlova A, Cole D, eds. Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021. Lecture Notes in Mechanical Engineering. Springer; 2022. doi:10.1007/978-3-031-07305-2_92
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Book Chapter | LibreCat-ID: 29727
Wohlleben MC, Bender A, Peitz S, Sextro W. Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction. In: Machine Learning, Optimization, and Data Science. Springer International Publishing; 2022. doi:10.1007/978-3-030-95470-3_8
LibreCat | DOI | Download (ext.)
 
[189]
2022 | Conference Paper | LibreCat-ID: 30371
Hagedorn OEC, Broll M, Kirsch O, Hemsel T, Sextro W. Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding. In: CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems. VDE VERLAG GMBH; 2022:138-143.
LibreCat
 
[188]
2022 | Newspaper Article | LibreCat-ID: 47159
Aimiyekagbon OK, Bender A, Sextro W. On the applicability of time series features as health indicators for technical systems operating under varying conditions. Condition Monitor. 2022:5-10.
LibreCat
 
[187]
2022 | Conference Paper | LibreCat-ID: 34104
Scheidemann C, Kirsch O, Hemsel T, Sextro W. Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding. In: 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). IEEE; 2022. doi:10.1109/estc55720.2022.9939478
LibreCat | DOI
 
[186]
2022 | Patent | LibreCat-ID: 9980
Reinke K, Bender A, Meyer T, Sextro W, Kimotho JK. Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer. Published online 2022.
LibreCat | Files available
 
[185]
2022 | Report | LibreCat-ID: 52045
Scheidemann C, Hemsel T, Sextro W. Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University; 2022. doi:10.2314/KXP:1879655276
LibreCat | Files available | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 27652
Aimiyekagbon OK, Bender A, Sextro W. Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten . In: VDI-Berichte 2391. VDI Verlag GmbH; 2021:197-210.
LibreCat
 
[183]
2021 | Journal Article | LibreCat-ID: 21436
Schemmel R, Krieger V, Hemsel T, Sextro W. Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. Microelectronics Reliability. 2021;119:114077. doi:https://doi.org/10.1016/j.microrel.2021.114077
LibreCat | DOI
 
[182]
2021 | Conference Paper | LibreCat-ID: 22724 | OA
Bender A, Sextro W. Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties. In: Do P, King S, Fink Olga, eds. Proceedings of the European Conference of the PHM Society 2021. Vol 6. ; 2021. doi:https://doi.org/10.36001/phme.2021.v6i1.2843
LibreCat | DOI | Download (ext.)
 
[181]
2021 | Conference Paper | LibreCat-ID: 22507 | OA
Aimiyekagbon OK, Bender A, Sextro W. On the applicability of time series features as health indicators for technical systems operating under varying conditions. In: Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat | Files available
 
[180]
2021 | Conference Paper | LibreCat-ID: 27111 | OA
Aimiyekagbon OK, Muth L, Wohlleben MC, Bender A, Sextro W. Rule-based Diagnostics of a Production Line. In: Do P, King S, Fink O, eds. Proceedings of the European Conference of the PHM Society 2021. Vol 6. ; 2021:527-536. doi:10.36001/phme.2021.v6i1.3042
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 27508 | OA
Schütte J, Sextro W. Tire Wear Reduction Based on an Extended Multibody Rear Axle Model. Vehicles. Published online 2021:233-256. doi:10.3390/vehicles3020015
LibreCat | DOI | Download (ext.)
 
[178]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin S, Schütte J, Bäumler C, Sextro W, Tröster T. Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations. Forces in Mechanics. 2021;6. doi:10.1016/j.finmec.2021.100065
LibreCat | DOI | Download (ext.)
 
[177]
2020 | Conference Paper | LibreCat-ID: 17355
Schemmel R, Scheidemann C, Hemsel T, Kirsch O, Sextro W. Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding. In: CIPS 2020; 11th International Conference on Integrated Power Electronics Systems. ; 2020:1-6.
LibreCat
 
[176]
2020 | Book | LibreCat-ID: 9857
Magnus K, Popp K, Sextro W. Schwingungen. Springer Vieweg Wiesbaden; 2020. doi:10.1007/978-3-658-31116-2
LibreCat | DOI
 
[175]
2020 | Conference Paper | LibreCat-ID: 17706
Schemmel R, Krieger V, Hemsel T, Sextro W. Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization. In: 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). ; 2020. doi:10.1109/eurosime48426.2020.9152679
LibreCat | DOI
 
[174]
2020 | Conference Paper | LibreCat-ID: 17810
Aimiyekagbon OK, Bender A, Sextro W. Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data. In: PHM Society European Conference. Vol 5. ; 2020.
LibreCat
 
[173]
2020 | Book Chapter | LibreCat-ID: 22007
Schütte J, Sextro W. Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear. In: Lecture Notes in Mechanical Engineering. ; 2020. doi:10.1007/978-3-030-38077-9_201
LibreCat | DOI
 
[172]
2020 | Patent | LibreCat-ID: 9981
Reinke K, Bender A, Meyer T, Sextro W, Kimotho JK. Patent EP 3 358 332 B1: Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts. Published online 2020.
LibreCat | Files available
 
[171]
2019 | Conference Paper | LibreCat-ID: 23716
Kaul T, Hentze J, Sextro W, Gräßler I. Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung. In: Bertram T, Corves B, Gräßler I, Janschek K, eds. Fachtagung Mechatronik 2019 Paderborn. ; 2019:19-24.
LibreCat
 
[170]
2019 | Conference Paper | LibreCat-ID: 15475
Schütte J, Sextro W, Kohl S. Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen. In: Fachtagung Mechatronik 2019. Paderborn: Universitätsbibliothek Paderborn, 2019; 2019. doi:10.17619/UNIPB/1-777
LibreCat | DOI
 
[169]
2019 | Conference Paper | LibreCat-ID: 14852
Dunst P, Bornmann P, Hemsel T, Littmann W, Sextro W. Atomization of Fluids with Ultrasound. In: Lötters J, Urban G, eds. Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019). Enschede, The Netherlands; 2019:140-143.
LibreCat | Files available
 
[168]
2019 | Conference Paper | LibreCat-ID: 15244
Hagedorn OEC, Pielsticker D, Hemsel T, Sextro W. Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen. In: 2. VDI-Fachtagung Schwingungen 2019. VDI Verlag GmbH · Düsseldorf 2019; 2019.
LibreCat
 
[167]
2019 | Book | LibreCat-ID: 10002
Sextro W, Brökelmann M. Intelligente Herstellung Zuverlässiger Kupferbondverbindungen. Vol VIII. Springer Verlag; 2019. doi:10.1007/978-3-662-55146-2
LibreCat | DOI
 
[166]
2019 | Conference Paper | LibreCat-ID: 10255
Bender A, Reinke K, Sextro W. Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement. In: 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019. Vol VDI-Berichte 2346. Bremen 2019; 2019:241-248.
LibreCat
 
[165]
2019 | Conference Paper | LibreCat-ID: 10257
Kaul T, Hentze J, Sextro W, Gräßler I. Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung. In: Fachtagung Mechatronik 2019 Paderborn. ; 2019.
LibreCat
 
[164]
2019 | Conference Paper | LibreCat-ID: 10258
Dunst P, Hemsel T, Bornmann P, Littmann W, Sextro W. Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten. In: DAGA 2019. ; 2019.
LibreCat
 
[163]
2019 | Journal Article | LibreCat-ID: 10334
Schemmel R, Hemsel T, Dymel C, Hunstig M, Brökelmann M, Sextro W. Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding. Sensors and Actuators A: Physical. 2019;295:653-662. doi:10.1016/j.sna.2019.04.025
LibreCat | DOI
 
[162]
2019 | Conference Paper | LibreCat-ID: 13460 | OA
Bender A, Schinke L, Sextro W. Remaining useful lifetime prediction based on adaptive failure thresholds. In: Beer M, Zio E, eds. Proceedings of the 29th European Safety and Reliability Conference (ESREL2019). ; 2019:1262-1269.
LibreCat | Download (ext.)
 
[161]
2019 | Conference Paper | LibreCat-ID: 13461 | OA
Kaul T, Bender A, Sextro W. Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems. In: Beer M, Zio E, eds. Proceedings of the 29th European Safety and Reliability Conference (ESREL2019). ; 2019:2340-2347.
LibreCat | Download (ext.)
 
[160]
2018 | Conference Paper | LibreCat-ID: 9987
Bender A, Sextro W. A particle filtering approach for temperature based prognostics. In: Safety and Reliability – Safe Societies in a Changing World. Trondheim, Norway; 2018:1025-1033.
LibreCat
 
[159]
2018 | Journal Article | LibreCat-ID: 9990
Dunst P, Bornmann P, Hemsel T, Littmann W, Sextro W. Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders. ACTUATOR 2018; 16th International Conference on New Actuators. 2018:142-145.
LibreCat
 
[158]
2018 | Journal Article | LibreCat-ID: 9991
Dunst P, Bornmann P, Hemsel T, Sextro W. Vibration-Assisted Handling of Dry Fine Powders. Actuators 2018, 7(2). 2018:1-11. doi:10.3390/act7020018
LibreCat | DOI
 
[157]
2018 | Conference Paper | LibreCat-ID: 9992
Dymel C, Eichwald P, Schemmel R, et al. Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process. In: (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany). ; 2018:1-6.
LibreCat
 
[156]
2018 | Conference Paper | LibreCat-ID: 9993
Dymel C, Schemmel R, Hemsel T, Sextro W, Brökelmann M, Hunstig M. Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding. In: (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan). ; 2018:41-44.
LibreCat
 
[155]
2018 | Book | LibreCat-ID: 9995
Meyer T, Kaul T, Kimotho JK, Sextro W. Steigerung Der Intelligenz Mechatronischer Systeme. Vol Steigerung der Verlässlichkeit technischer Systeme. Springer Nature Switzerland AG. Part of Springer Nature.; 2018:193-213.
LibreCat
 
[154]
2018 | Conference Paper | LibreCat-ID: 9997
Schemmel R, Althoff S, Sextro W, Unger A, Brökelmann M, Hunstig M. Effects of different working frequencies on the joint formation in copper wire bonding. In: CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018). Stuttgart, Germany; 2018:230-235.
LibreCat
 
[153]
2018 | Conference Paper | LibreCat-ID: 9998
Schemmel R, Hemsel T, Sextro W. Numerical and experimental investigations in ultrasonic heavy wire bonding. In: 6th European Conference on Computational Mechanics (ECCM 6). Glasgow, UK; 2018:1-12.
LibreCat
 
[152]
2018 | Conference Paper | LibreCat-ID: 9999
Unger A, Hunstig M, Meyer T, Brökelmann M, Sextro W. Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges. In: In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018. Vol Vol. 2018, No. 1, pp. 000572-000577. ; 2018. doi:10.4071/2380-4505-2018.1.000572
LibreCat | DOI
 
[151]
2017 | Conference Paper | LibreCat-ID: 23560
Hentze J, Kaul T, Gräßler I, Sextro W. Integrated modeling of behavior and reliability in system development. In: Maier A, Skec S, McKesson C, Van der Loos M, eds. ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB. Design Society; 2017:385-394.
LibreCat
 
[150]
2017 | Conference Paper | LibreCat-ID: 9969
Bender A, Kaul T, Sextro W. Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente. In: Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017; 2017:347-358.
LibreCat
 
[149]
2017 | Conference Paper | LibreCat-ID: 9970
Bender A, Kimotho JK, Kohl S, Sextro W, Reinke K. Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen. In: 15. Internationale Schienenfahrzeugtagung. ; 2017:123-125.
LibreCat
 
[148]
2017 | Conference Paper | LibreCat-ID: 9971
Bender A, Sextro W, Reinke K. Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen. In: VDI-Berichte 2301. ; 2017:49-60.
LibreCat
 
[147]
2017 | Journal Article | LibreCat-ID: 9972
Dunst P, Hemsel T, Sextro W. Analysis of pipe vibration in an ultrasonic powder transportationsystem. elsevier. 2017;Sensors and Actuators A 263:733-736.
LibreCat
 
[146]
2017 | Journal Article | LibreCat-ID: 9973
Eichwald P, Althoff S, Schemmel R, et al. Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design. IMAPSource. 2017;Vol. 2017, No. 1.
LibreCat
 
[145]
2017 | Conference Paper | LibreCat-ID: 9974
Hentze J, Kaul T, Grässler I, Sextro W. Integrated modeling og behavior and reliability in system development. In: ICED17, 21st International Conference on Enginieering Design. ; 2017:385-394.
LibreCat
 
[144]
2017 | Journal Article | LibreCat-ID: 9976
Kaul T, Meyer T, Sextro W. Formulation of reliability-related objective functions for design of intelligent mechatronic systems. SAGE Journals. 2017;Vol. 231(4):390-399. doi:10.1177/1748006X17709376
LibreCat | DOI
 
[143]
2017 | Conference Paper | LibreCat-ID: 9978
Kimotho JK, Sextro W, Hemsel T. Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing. In: IEEE Transactions on Reliability. ; 2017:1-10. doi:10.1109/TR.2017.2710260
LibreCat | DOI
 
[142]
2017 | Conference Paper | LibreCat-ID: 9982
Schemmel R, Hemsel T, Sextro W. MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall. In: 43. Deutsche Jahrestagung Für Akustik. Kiel 2017; 2017:611-614.
LibreCat
 
[141]
2017 | Conference Paper | LibreCat-ID: 9983
Schulze S, Sextro W, Kister K. Model based optimization of dynamics in adaptive headlamps. In: Proceedings of the 12th International Symposium on Automotive Lighting 2017. ; 2017.
LibreCat
 
[140]
2017 | Conference Paper | LibreCat-ID: 9985
Sextro W, Meyer T, Kaul T, Kimotho JK. Entwicklung verlässlicher, intelligenter Systeme. In: VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2017:17–30.
LibreCat
 
[139]
2016 | Conference Paper | LibreCat-ID: 9955
Althoff S, Meyer T, Unger A, Sextro W, Eacock F. Shape-Dependent Transmittable Tangential Force of Wire Bond Tools. In: IEEE 66th Electronic Components and Technology Conference. ; 2016:2103-2110. doi:10.1109/ECTC.2016.234
LibreCat | DOI
 
[138]
2016 | Journal Article | LibreCat-ID: 9957
Brökelmann M, Unger A, Meyer T, et al. Kupferbondverbindungen intelligent herstellen. wt-online. 2016;7/8:512-519.
LibreCat
 
[137]
2016 | Conference Paper | LibreCat-ID: 9958
Dunst P, Sextro W, Bornmann P, Hemsel T, Littmann W. Transportation of dry fine powders by coordinated friction manipulation. In: PAMM Proc. Appl. Math. Mech. 16. Braunschweig; 2016:635-636. doi:10.1002/pamm.201610306
LibreCat | DOI
 
[136]
2016 | Conference Paper | LibreCat-ID: 9960
Eichwald P, Unger A, Eacock F, et al. Micro Wear Modeling in Copper Wire Wedge Bonding. In: IEEE CPMT Symposium Japan, 2016. ; 2016.
LibreCat
 
[135]
2016 | Conference Paper | LibreCat-ID: 9961
Kaul T, Meyer T, Sextro W. Modeling of Complex Redundancy in Technical Systems with Bayesian Networks. In: Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016. ; 2016.
LibreCat
 
[134]
2016 | Conference Paper | LibreCat-ID: 9963
Kohl S, Sextro W, Schulze S. Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS. In: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016. Cyberjaya, Malaysia, 2016; 2016:1-12.
LibreCat
 
[133]
2016 | Conference Paper | LibreCat-ID: 9964
Lessmeier C, Kimotho JK, Zimmer D, Sextro W. Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification. In: European Conference of the Prognostics and Health Management Society. ; 2016.
LibreCat
 
[132]
2016 | Conference Paper | LibreCat-ID: 9966
Meyer T, Unger A, Althoff S, et al. Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation. In: IEEE 66th Electronic Components and Technology Conference. ; 2016:622-628. doi:10.1109/ECTC.2016.215
LibreCat | DOI
 
[131]
2016 | Conference Paper | LibreCat-ID: 9967
Schulze S, Sextro W, Kohl S. Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems. In: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016. ; 2016:1-11.
LibreCat
 
[130]
2016 | Conference Paper | LibreCat-ID: 9968
Unger A, Schemmel R, Meyer T, et al. Validated Simulation of the Ultrasonic Wire Bonding Process. In: Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016. IEEE CPMT Symposium Japan; 2016:251-254.
LibreCat
 
[129]
2015 | Conference Paper | LibreCat-ID: 9943
Althoff S, Unger A, Sextro W, Eacock F. Improving the cleaning process in copper wire bonding by adapting bonding parameters. In: 2015 17th Electronics Packaging Technology Conference. ; 2015:1-6. doi:10.1109/EPTC.2015.7412402
LibreCat | DOI
 
[128]
2015 | Journal Article | LibreCat-ID: 9944
Bornmann P, Hemsel T, Sextro W, Memoli G, Hodnett M, Zeqiri B. Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler. tm - Technisches Messen. 2015;82(2):73-84. doi:10.1515/teme-2015-0017
LibreCat | DOI
 
[127]
2015 | Conference Paper | LibreCat-ID: 9945
Kaul T, Meyer T, Sextro W. Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme. In: Gausemeier J, Dumitrescu R, Rammig F, Schäfer W, Trächtler A, eds. 10. Paderborner Workshop Entwurf Mechatronischer Systeme. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2015:101-112.
LibreCat
 
[126]
2015 | Conference Paper | LibreCat-ID: 9946
Kaul T, Meyer T, Sextro W. Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems. In: et al.} P, ed. European Safety and Reliability Conference (ESREL2015). London: Taylor and Francis; 2015. doi:10.1201/b19094-290
LibreCat | DOI
 
[125]
2015 | Conference Paper | LibreCat-ID: 9947
Kimotho JK, Sextro W. Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics. In: Annual Conference of the Prognostics and Health Management Society 2015. Vol 6. ; 2015.
LibreCat
 
[124]
2015 | Conference Paper | LibreCat-ID: 9949
Meyer T, Kaul T, Sextro W. Advantages of reliability-adaptive system operation for maintenance planning. In: Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes. ; 2015:940-945. doi:10.1016/j.ifacol.2015.09.647
LibreCat | DOI
 
[123]
2015 | Conference Paper | LibreCat-ID: 9950
Meyer T, Kimotho JK, Sextro W. Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme. In: 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2015:111-122.
LibreCat
 
[122]
2015 | Conference Paper | LibreCat-ID: 9951
Meyer T, Unger A, Althoff S, et al. Modeling and simulation of the ultrasonic wire bonding process. In: 2015 17th Electronics Packaging Technology Conference. ; 2015. doi:10.1109/EPTC.2015.7412377
LibreCat | DOI
 
[121]
2015 | Conference Paper | LibreCat-ID: 9952
Schulte F, Neuhaus J, Sextro W. A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties. In: Proceedings of ICoEV 2015 International Conference on Engineering Vibration. ; 2015:1109-1117.
LibreCat
 
[120]
2015 | Conference Paper | LibreCat-ID: 9954
Unger A, Sextro W, Meyer T, et al. Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear. In: 2015 17th Electronics Packaging Technology Conference. ; 2015. doi:10.1109/EPTC.2015.7412375
LibreCat | DOI
 
[119]
2014 | Book | LibreCat-ID: 25168
Gausemeier J, Rammig F-J, Schäfer W, Sextro W. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag; 2014.
LibreCat
 
[118]
2014 | Book Chapter | LibreCat-ID: 25173
Dellnitz M, Flaßkamp K, Hartmann P, et al. Self-optimizing Mechatronic Systems. In: Dependability of Self-Optimizing Mechatronic Systems, Kapitel: 1.1. Springer-Verlag; 2014:3-12.
LibreCat
 
[117]
2014 | Book Chapter | LibreCat-ID: 28394
Dorociak R, Gausemeier J, Iwanek P, Meyer T, Sextro W, Sondermann-W{\"o}lke C. Development of the Active Guidance Module. In: Dependability of Self-Optimizing Mechatronic Systems. AACE Press; 2014:178-182.
LibreCat
 
[116]
2014 | Book | LibreCat-ID: 28396
Gausemeier J, Rammig F-J, Sch{\"a}fer Wilhelm, Sextro W. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2014.
LibreCat
 
[115]
2014 | Book Chapter | LibreCat-ID: 28399
Dorociak R, Gausemeier J{\"u}rgen, Iwanek Peter, Meyer T, Sextro W. Selecting Suitable Methods Using the Methodology. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag Berlin Heidelberg; 2014:174-178.
LibreCat
 
[114]
2014 | Book Chapter | LibreCat-ID: 28400
Dorociak R, Gausemeier J, Iwanek P, Meyer T, Sextro W. Selecting Suitable Methods Using the Methodology. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag Berlin Heidelberg; 2014:174-178.
LibreCat
 
[113]
2014 | Book Chapter | LibreCat-ID: 28410
Iwanek P, Meyer T, Priesterjahn C, Sextro W, Va{\ss}holz M. Challenges. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2014:12-15.
LibreCat
 
[112]
2014 | Conference Paper | LibreCat-ID: 9868
Althoff S, Neuhaus J, Hemsel T, Sextro W. Improving the bond quality of copper wire bonds using a friction model approach. In: Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th. ; 2014:1549-1555. doi:10.1109/ECTC.2014.6897500
LibreCat | DOI
 
[111]
2014 | Conference Paper | LibreCat-ID: 9869
Bornmann P, Hemsel T, Sextro W, Memoli G, Hodnett M, Zeqiri B. Self-Sensing Ultrasound Transducer for Cavitation Detection. In: 2014 IEEE International Ultrasonics Symposium Proceedings. ; 2014:663-666. doi:10.1109/ULTSYM.2014.0163
LibreCat | DOI
 
[110]
2014 | Conference Paper | LibreCat-ID: 9871
Eichwald P, Sextro W, Althof S, et al. Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding. In: Proceedings of the 47th International Symposium on Microelectronics. ; 2014:856-861. doi:10.4071/isom-THP34
LibreCat | DOI
 
[109]
2014 | Book | LibreCat-ID: 9873
Gausemeier J, Josef Rammig F, Schäfer W, Sextro W. Dependability of Self-Optimizing Mechatronic Systems. Vol Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg; 2014.
LibreCat
 
[108]
2014 | Journal Article | LibreCat-ID: 9874
Hemsel T, Bornmann P, Morita T, Sondermann-Wölke C, Sextro W. Reliability analysis of ultrasonic power transducers. Archive of Applied Mechanics. 2014:1-7. doi:10.1007/s00419-014-0965-4
LibreCat | DOI
 
[107]
2014 | Journal Article | LibreCat-ID: 9876
Hunstig M, Hemsel T, Sextro W. High-velocity operation of piezoelectric inertia motors: experimental validation. Archive of Applied Mechanics. 2014:1-9. doi:10.1007/s00419-014-0940-0
LibreCat | DOI
 
[106]
2014 | Conference Paper | LibreCat-ID: 9879
Kimotho JK, Meyer T, Sextro W. PEM fuel cell prognostics using particle filter with model parameter adaptation. In: Prognostics and Health Management (PHM), 2014 IEEE Conference On. ; 2014:1-6. doi:10.1109/ICPHM.2014.7036406
LibreCat | DOI
 
[105]
2014 | Conference Paper | LibreCat-ID: 9880
Kimotho JK, Sextro W. An approach for feature extraction and selection from non-trending data for machinery prognosis. In: Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014. Vol 5. ; 2014.
LibreCat
 
[104]
2014 | Journal Article | LibreCat-ID: 9881
Kimotho JK, Sextro W. Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation. PAMM. 2014;14(1):815-816. doi:10.1002/pamm.201410388
LibreCat | DOI
 
[103]
2014 | Journal Article | LibreCat-ID: 9882
Kohl S, Sextro W, Zuber A. Tire footprint analysis depending on the elastokinematics of a multi-link suspension system using multi-body dynamics simulation. PAMM. 2014;14(1):65-66. doi:10.1002/pamm.201410020
LibreCat | DOI
 
[102]
2014 | Book Chapter | LibreCat-ID: 9883
Meyer T, Priesterjahn C, Sextro W. Conclusion and Outlook. In: Gausemeier J, Josef Rammig F, Schäfer W, Sextro W, eds. Dependability of Self-Optimizing Mechatronic Systems. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg; 2014:189-190. doi:10.1007/978-3-642-53742-4_5
LibreCat | DOI
 
[101]
2014 | Journal Article | LibreCat-ID: 9885
Meyer T, Sondermann-Wölke C, Sextro W. Method to Identify Dependability Objectives in Multiobjective Optimization Problem. Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence. 2014;15:46-53. doi:10.1016/j.protcy.2014.09.033
LibreCat | DOI
 
[100]
2014 | Conference Paper | LibreCat-ID: 9887
Neuhaus J, Sextro W. Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements. In: Liu GR, Guan ZW, eds. Proceedings of the 5th International Conference on Computational Methods. ScienTech Publisher; 2014.
LibreCat
 
[99]
2014 | Journal Article | LibreCat-ID: 9888
Schulze S, Sextro W, Grüter F. Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications. PAMM. 2014;14(1):39-40. doi:10.1002/pamm.201410012
LibreCat | DOI
 
[98]
2014 | Conference Paper | LibreCat-ID: 9889
Sprock C, Sextro W. Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending. In: Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International. ; 2014:320-324. doi:10.1109/I2MTC.2014.6860760
LibreCat | DOI
 
[97]
2014 | Conference Paper | LibreCat-ID: 9890
Sprock C, Sextro W. Time-efficient analysis of nonlinear dynamic behavior. In: Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1,. ; 2014:293-294.
LibreCat
 
[96]
2014 | Conference Paper | LibreCat-ID: 9891
Sprock C, Sextro W. Time-efficient analysis of nonlinear peak bending behavior. In: Proceedings of ISMA - International Conference of Noise and Vibration. 2014. ; 2014:1-8.
LibreCat
 
[95]
2014 | Conference Paper | LibreCat-ID: 9892
Sprock C, Sextro W. Vibration Analysis of Mechanical Structures using Multisine Excitation Techniques. In: Proceedings of 31st Danubia-Adria Symposium. 2014. ; 2014.
LibreCat
 
[94]
2014 | Book Chapter | LibreCat-ID: 9893
Trächtler A, Hölscher C, Rasche C, et al. Introduction to Self-optimization and Dependability. In: Gausemeier J, Josef Rammig F, Schäfer W, Sextro W, eds. Dependability of Self-Optimizing Mechatronic Systems. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg; 2014:1-24. doi:10.1007/978-3-642-53742-4_1
LibreCat | DOI
 
[93]
2014 | Book Chapter | LibreCat-ID: 9894
Trächtler A, Kleinjohann B, Heinzemann C, et al. Case Study. In: Gausemeier J, Josef Rammig F, Schäfer W, Sextro W, eds. Dependability of Self-Optimizing Mechatronic Systems. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg; 2014:173-188. doi:10.1007/978-3-642-53742-4_4
LibreCat | DOI
 
[92]
2014 | Conference Paper | LibreCat-ID: 9895
Unger A, Sextro W, Althoff S, et al. Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds. In: Proceedings of the 47th International Symposium on Microelectronics (IMAPS). San Diego, CA, US; 2014:289-294.
LibreCat
 
[91]
2014 | Conference Paper | LibreCat-ID: 9896
Unger A, Sextro W, Althoff S, et al. Data-driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding. In: Proceedings of 8th International Conference on Integrated Power Electronic Systems. Vol 141. ; 2014:175-180.
LibreCat
 
[90]
2013 | Conference Paper | LibreCat-ID: 26973
Meyer T, Kessler JH, Sextro W, Trächtler A. Increasing Intelligent Systems’ Reliability by using Reconfiguration. In: The Annual Reliability and Maintainability Symposium (RAMS). ; 2013.
LibreCat
 
[89]
2013 | Book Chapter | LibreCat-ID: 23139
Kessler JH, Meyer T, Sextro W, Sondermann-Wölke C, Trächtler A. Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2013:55-62.
LibreCat
 
[88]
2013 | Conference Paper | LibreCat-ID: 23140
Meyer T, Kessler JH, Sextro W, Trächtler A. Increasing Intelligent Systems’ Reliability by using Reconfiguration. In: The Annual Reliability and Maintainability Symposium (RAMS). ; 2013.
LibreCat
 
[87]
2013 | Book Chapter | LibreCat-ID: 23149
Hölscher C, Kessler JH, Meyer T, et al. Applications of Self-Optimizing Systems. In: Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany; 2013:16-22.
LibreCat
 
[86]
2013 | Journal Article | LibreCat-ID: 9794
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Increasing the power of piezoelectric energy harvesters by magnetic stiffening. Journal of Intelligent Material Systems and Structures. 2013;24(11):1332-1342. doi:10.1177/1045389X13483021
LibreCat | DOI
 
[85]
2013 | Journal Article | LibreCat-ID: 9795
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments. Sensors and Actuators A: Physical. 2013;200:138-146. doi:10.1016/j.sna.2013.01.008
LibreCat | DOI
 
[84]
2013 | Conference Paper | LibreCat-ID: 9796
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems. In: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013. Berichte aus dem IDS. Hannover, Germany; 2013:159-161.
LibreCat
 
[83]
2013 | Conference Paper | LibreCat-ID: 9797
Althoff S, Neuhaus J, Hemsel T, Sextro W. A friction based approach for modeling wire bonding. In: IMAPS 2013, 46th International Symposium on Microelectronics. Orlando (Florida), USA; 2013. doi:10.4071/isom-2013-TA67
LibreCat | DOI
 
[82]
2013 | Conference Paper | LibreCat-ID: 9799
Eichwald P, Sextro W, Althoff S, et al. Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding. In: 15th Electronics Packaging Technology Conference. ; 2013. doi:10.1109/EPTC.2013.6745803
LibreCat | DOI
 
[81]
2013 | Conference Paper | LibreCat-ID: 9801
Hunstig M, Al-Ashtari W, Hemsel T, Sextro W. Leistungs- und Bandbreitensteigerung von Energy-Harvesting-Generatoren für Energieautarke Systeme. In: Gausemeier J, Dumitrescu R, Rammig F, Schäfer W, Trächtler A, eds. 9. Paderborner Workshop Entwurf Mechatronischer Systeme. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2013:359-372.
LibreCat
 
[80]
2013 | Conference Paper | LibreCat-ID: 9802
Hunstig M, Hemsel T, Sextro W. High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation. In: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop. Hannover, Germany; 2013:16-18.
LibreCat
 
[79]
2013 | Journal Article | LibreCat-ID: 9803
Hunstig M, Hemsel T, Sextro W. Modelling the friction contact in an inertia motor. Journal of Intelligent Material Systems and Structures. 2013;24(11):1380-1391. doi:10.1177/1045389X12474354
LibreCat | DOI
 
[78]
2013 | Journal Article | LibreCat-ID: 9804
Hunstig M, Hemsel T, Sextro W. Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation. Sensors and Actuators A: Physical. 2013;200:79-89. doi:10.1016/j.sna.2012.11.043
LibreCat | DOI
 
[77]
2013 | Journal Article | LibreCat-ID: 9805
Hunstig M, Hemsel T, Sextro W. Stick-slip and slip-slip operation of piezoelectric inertia drives - Part I: Ideal Excitation. Sensors and Actuators A: Physical. 2013;200:90-100. doi:10.1016/j.sna.2012.11.012
LibreCat | DOI
 
[76]
2013 | Journal Article | LibreCat-ID: 9807
Kimotho JK, Sondermann-Wölke C, Meyer T, Sextro W. Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization. Chemical Engineering Transactions. 2013;33:619-624. doi:10.3303/CET1333104
LibreCat | DOI
 
[75]
2013 | Journal Article | LibreCat-ID: 9808
Kimotho JK, Sondermann-Wölke C, Meyer T, Sextro W. Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation. International Journal of Prognostics and Health Management. 2013;4(2).
LibreCat
 
[74]
2013 | Conference Paper | LibreCat-ID: 9855
Kohl S, Zuber A, Sextro W. Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems. In: Proc. Appl. Math. Mech. Vol 13. ; 2013:23-24. doi:10.1002/pamm.201310007
LibreCat | DOI
 
[73]
2013 | Conference Paper | LibreCat-ID: 9858
Meyer T, Hölscher C, Menke M, Sextro W, Zimmer D. Multiobjective Optimization including Safety of Operation Applied to a Linear Drive System. In: Proc. Appl. Math. Mech. Vol 13. ; 2013:483-484. doi:10.1002/pamm.201310234
LibreCat | DOI
 
[72]
2013 | Conference Paper | LibreCat-ID: 9859
Meyer T, Henning Keßler J, Sextro W, Trächtler A. Increasing Intelligent Systems’ Reliability by Using Reconfiguration. In: Proceedings of the Annual Reliability and Maintainability Symposium (RAMS). Orlando, FL; 2013. doi:10.1109/RAMS.2013.6517636
LibreCat | DOI
 
[71]
2013 | Journal Article | LibreCat-ID: 9860
Meyer T, Sondermann-Wölke C, Kimotho JK, Sextro W. Controlling the Remaining Useful Lifetime using Self-Optimization. Chemical Engineering Transactions. 2013;33:625-630. doi:10.3303/CET1333105
LibreCat | DOI
 
[70]
2013 | Conference Paper | LibreCat-ID: 9861
Meyer T, Sondermann-Wölke C, Sextro W, Riedl M, Gouberman A, Siegle M. Bewertung der Zuverlässigkeit selbstoptimierender Systeme mit dem LARES-Framework. In: Gausemeier J, Dumitrescu R, Rammig F, Schäfer W, Trächtler A, eds. 9. Paderborner Workshop Entwurf Mechatronischer Systeme. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2013:161-174.
LibreCat
 
[69]
2012 | Journal Article | LibreCat-ID: 9781
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Frequency tuning of piezoelectric energy harvesters by magnetic force. Smart Materials and Structures. 2012;21(3):035019.
LibreCat
 
[68]
2012 | Journal Article | LibreCat-ID: 9782
Al-Ashtari W, Hunstig M, Hemsel T, Sextro W. Analytical determination of characteristic frequencies and equivalent circuit parameters of a piezoelectric bimorph. Journal of Intelligent Material Systems and Structures. 2012;23(1):15-23. doi:10.1177/1045389X11430742
LibreCat | DOI
 
[67]
2012 | Conference Paper | LibreCat-ID: 9783
Bornmann P, Hemsel T, Sextro W, Maeda T, Morita T. Non-perturbing cavitation detection / monitoring in sonochemical reactors. In: Ultrasonics Symposium (IUS), 2012 IEEE International. ; 2012:1141-1144. doi:10.1109/ULTSYM.2012.0284
LibreCat | DOI
 
[66]
2012 | Conference Paper | LibreCat-ID: 9787
Kohl S, Sextro W, Zuber A. Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie. In: 8. Tag Des Fahrwerks, Aachen, 2012. Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen; 2012:38-60.
LibreCat
 
[65]
2012 | Conference Paper | LibreCat-ID: 9791
Sondermann-Wölke C, Meyer T, Dorociak R, Gausemeier J, Sextro W. Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution. In: Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012). Helsinki, Finland; 2012.
LibreCat
 
[64]
2012 | Journal Article | LibreCat-ID: 9806
Hunstig M, Hemsel T, Sextro W. Analysis of different operation modes for inertia motors. ACTUATOR 2012 Conference Proceedings. 2012:761-764.
LibreCat
 
[63]
2011 | Conference Paper | LibreCat-ID: 26981
Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: Technische Zuverlässigkeit –TTZ. ; 2011.
LibreCat
 
[62]
2011 | Conference Paper | LibreCat-ID: 23184
Lurye O, Sondermann-Wölke C, Kromov I, Sextro W, Trächtler A. Verlässlichkeitsanalyse des Degradationsverhaltens mechatronischer Systeme mit mehreren Betriebsstrategien. In: VDI Bericht Zur Tagung Technische Zuverlässigkeit. Leonberg: VDI-Verlag; 2011.
LibreCat
 
[61]
2011 | Conference Paper | LibreCat-ID: 23194
Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: Technische Zuverlässigkeit TTZ. ; 2011.
LibreCat
 
[60]
2011 | Conference Paper | LibreCat-ID: 9768
Lurie O, Kromov I, Trächtler A, Sondermann-Wölke C, Sextro W. Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies. In: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2011:99-110.
LibreCat
 
[59]
2011 | Conference Paper | LibreCat-ID: 9771
Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2011:291-302.
LibreCat
 
[58]
2011 | Journal Article | LibreCat-ID: 9772
Tomberger C, Dietmaier P, Sextro W, Six K. Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature. Wear. 2011;271:2-12. doi:10.1016/j.wear.2010.10.025
LibreCat | DOI
 
[57]
2011 | Patent | LibreCat-ID: 9790
Sextro W, Hunstig M, Bornmann P, Hemsel T. Patent DE10201003395: Anordnung und Verfahren zur mehrdimensionalen Messung von Schwingungen eines Objekts. . Published online 2011.
LibreCat
 
[56]
2010 | Journal Article | LibreCat-ID: 9747
Hölzl JS, Sextro W. Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen. PAMM. 2010;10(1):247-248. doi:10.1002/pamm.201010116
LibreCat | DOI
 
[55]
2010 | Journal Article | LibreCat-ID: 9748
Hölzl JS, Sextro W. Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces. SAE International Journal of Passenger Cars- Mechanical Systems. 2010:929-935. doi:10.4271/2010-01-1422
LibreCat | DOI
 
[54]
2010 | Conference Paper | LibreCat-ID: 9753
Hunstig M, Hemsel T, Sextro W. Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren. In: Gausemeier J, Rammig F, Schäfer W, Trächtler A, eds. 7. Paderborner Workshop Entwurf Mechatronischer Systeme. Vol 272. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2010:129-141.
LibreCat
 
[53]
2010 | Conference Paper | LibreCat-ID: 9754
Hunstig M, Hemsel T, Sextro W. Improving the Performance of Piezoelectric Inertia Motors. In: ACTUATOR 2010 Conference Proceedings. ; 2010:657-661.
LibreCat
 
[52]
2010 | Conference Paper | LibreCat-ID: 9760
Sondermann-Wölke C, Hemsel T, Sextro W, Gausemeier J, Pook S. Guideline for the dependability-oriented design of self-optimizing systems. In: Industrial Informatics (INDIN), 2010 8th IEEE International Conference On. ; 2010:739-744. doi:10.1109/INDIN.2010.5549490
LibreCat | DOI
 
[51]
2010 | Journal Article | LibreCat-ID: 9761
Sondermann-Wölke C, Sextro W. Integration of Condition Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance Module. International Journal On Advances in Intelligent Systems. 2010;3(1-3):65-74.
LibreCat
 
[50]
2010 | Conference Paper | LibreCat-ID: 9762
Sondermann-Wölke C, Sextro W, Geisler J, Trächtler A. Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls. In: Gausemeier J, Rammig FJ, Trächtler A, eds. Entwurf Mechatronischer Systeme. Vol 272. HNI-Verlagsschriftenreihe. Paderborn; 2010:411-420.
LibreCat
 
[49]
2010 | Conference Paper | LibreCat-ID: 9763
Sondermann-Wölke C, Geisler J, Sextro W. Increasing the reliability of a self-optimizing railway guidance system. In: Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual. ; 2010:1-6. doi:10.1109/RAMS.2010.5448080
LibreCat | DOI
 
[48]
2010 | Journal Article | LibreCat-ID: 9764
Tomberger C, Dietmaier P, Martin R, Sextro W, Six K. Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den Kraftschluss zwischen Rad und Schiene. ZEVrail. 2010;134:127-135.
LibreCat
 
[47]
2009 | Conference Paper | LibreCat-ID: 9742
Sondermann-Wölke C, Sextro W. Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules. In: Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World: ; 2009:15-20. doi:10.1109/ComputationWorld.2009.47
LibreCat | DOI
 
[46]
2007 | Conference Paper | LibreCat-ID: 9560
Tonchev A, Hirschberg W, Sextro W, Major Z, Neges J. Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe. In: 27. Internationales Mju-Symposium/Bremsen-Fachtagung. 12. Bad Neuenahr: VDI Verlag GmbH; 2007:29-49.
LibreCat
 
[45]
2007 | Conference Paper | LibreCat-ID: 9561
Tonchev A, Hirschberg W, Sextro W, Major Z, Neges J. Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc. In: 27. Internationales Mju-Symposium/Bremsen-Fachtagung. 12. Bad Neuenahr: VDI Verlag GmbH; 2007:144-163.
LibreCat
 
[44]
2007 | Conference Paper | LibreCat-ID: 9563
Genzo A, Sextro W, Panning L. Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten. In: VDI-Berichte. Vol 2022. Düsseldorf: VDI Verlag GmbH; 2007:147-161.
LibreCat
 
[43]
2007 | Journal Article | LibreCat-ID: 9567
Szwedowicz J, Visser R, Sextro W, Masserey PA. On Nonlinear Forced Vibration of Shrouded Turbine Blades. Journal of Turbomachinery. 2007;130(1):011002-011002.
LibreCat
 
[42]
2006 | Conference Paper | LibreCat-ID: 9535
Genzo A, Sextro W. Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts. In: Proceedings of ISMA - International Conference on Noise and Vibration Engineering. ; 2006:51-52.
LibreCat
 
[41]
2006 | Book Chapter | LibreCat-ID: 9536
Gutzeit F, Sextro W, Kröger M. Unsteady rolling contact of rubber wheels. In: Wriggers P, Nackenhorst U, eds. Analysis and Simulation of Contact Problems. Vol 27. Lecture Notes in Applied and Computational Mechanics. Springer Berlin Heidelberg; 2006:261-270. doi:10.1007/3-540-31761-9_29
LibreCat | DOI
 
[40]
2006 | Conference Paper | LibreCat-ID: 9542
Hofmeisterro A, Sextro W, Röschel O. Error-Workspace Analysis of Plane Mechanisms. In: Proceedings of EUCOMES, the First European Conference on Mechanism Science. Obergurgl, {\"O}sterreich; 2006:1-12.
LibreCat
 
[39]
2006 | Book Chapter | LibreCat-ID: 9551
Sextro W, Moldenhauer P, Wangenheim M, Lindner M, Kröger M. Contact behaviour of a sliding rubber element. In: Wriggers P, Nackenhorst U, eds. Analysis and Simulation of Contact Problems. Vol 27. Lecture Notes in Applied and Computational Mechanics. Springer Berlin Heidelberg; 2006:243-252. doi:10.1007/3-540-31761-9_27
LibreCat | DOI
 
[38]
2005 | Journal Article | LibreCat-ID: 9266
Genzo A, Sextro W, Popp K. Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts. PAMM. 2005;5(1):91-92. doi:10.1002/pamm.200510026
LibreCat | DOI
 
[37]
2005 | Journal Article | LibreCat-ID: 9526
Genzo A, Sextro W, Popp K. Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts. PAMM. 2005;5(1):91-92. doi:10.1002/pamm.200510026
LibreCat | DOI
 
[36]
2005 | Journal Article | LibreCat-ID: 9529
Hofmeister A, Sextro W, Röschel O. Unkontrollierbare Bewegungen ebener Mechanismen mit Gelenkspiel. PAMM. 2005;5(1):201-202. doi:10.1002/pamm.200510078
LibreCat | DOI
 
[35]
2004 | Conference Paper | LibreCat-ID: 8952
Götting F, Sextro W, Panning L, Popp K. Systematic mistuning of bladed disk assemblies with friction contacts. In: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Vol 6. ; 2004:257-267.
LibreCat
 
[34]
2004 | Journal Article | LibreCat-ID: 9520
Lindner M, Sextro W, Popp K. Hysteretic Friction of a Sliding Rubber Element. PAMM. 2004;4(1):101-102. doi:10.1002/pamm.200410032
LibreCat | DOI
 
[33]
2004 | Conference Paper | LibreCat-ID: 9523
Panning L, Popp K, Sextro W, Götting F. Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application. In: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Vol 6. Vienna, Austria; 2004:269-280. doi:10.1115/GT2004-53316
LibreCat | DOI
 
[32]
2003 | Conference Paper | LibreCat-ID: 8933
Götting F, Sextro W, Panning L, Popp K. Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen. In: Irretier H, Nordmann R, Springer H, eds. Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Darmstadt. Vieweg-Verlag; 2003:201-210.
LibreCat
 
[31]
2003 | Journal Article | LibreCat-ID: 8934
Genzo A, Sextro W, Popp K. Erzwungene Schwingungen von elastischen Mehrkörpersystemen mit Reibkontakten. PAMM. 2003;2(1):120-121. doi:10.1002/pamm.200310046
LibreCat | DOI
 
[30]
2003 | Journal Article | LibreCat-ID: 8937
Panning L, Sextro W, Popp K. Design of Friction Dampers for Mistuned Bladed Disks. PAMM. 2003;3(1):118-119. doi:10.1002/pamm.200310336
LibreCat | DOI
 
[29]
2003 | Journal Article | LibreCat-ID: 8938
Panning L, Sextro W, Popp K. Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers. International Journal of Rotating Machinery. 2003;9(3):219-228.
LibreCat
 
[28]
2003 | Journal Article | LibreCat-ID: 8939
Popp K, Panning L, Sextro W. Vibration Damping by Friction Forces -Theory and Applications. Journal of Vibration and Control. 2003;9:419-448.
LibreCat
 
[27]
2003 | Conference Paper | LibreCat-ID: 8940
Sextro W, Popp K. Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen am Beispiel von Turbomaschinenschaufeln. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW). Frankfurt am Main, Germany; 2003:40.
LibreCat
 
[26]
2003 | Conference Paper | LibreCat-ID: 8941
Szwedowicz J, Sextro W, Visser R, Masserey P. On forced vibration of shrouded turbine blades. In: ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference. Atlanta, Georgia, USA; 2003. doi:doi:10.1115/GT2003-38808
LibreCat | DOI
 
[25]
2002 | Conference Paper | LibreCat-ID: 8928
Panning L, Sextro W, Popp K. Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with respect to Friction Damping. In: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande; 2002.
LibreCat
 
[24]
2002 | Conference Paper | LibreCat-ID: 8929
Panning L, Sextro W, Popp K. Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers. In: Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC. Honolulu, Hawaii, USA; 2002.
LibreCat
 
[23]
2002 | Conference Paper | LibreCat-ID: 8931
Sextro W, Panning L, Götting F. Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts. In: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande; 2002.
LibreCat
 
[22]
2002 | Conference Paper | LibreCat-ID: 8932
Sextro W, Popp K. Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen. Frankfurt am Main, Germany; 2002:157-183.
LibreCat
 
[21]
2001 | Conference Paper | LibreCat-ID: 8921
Panning L, Sextro W, Popp K. Schwingungsanalyse verstimmter Schaufelkränze mit Reibelementen. In: Irretier H, Nordmann R, Springer H, eds. Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Wien. Vieweg-Verlag; 2001:297-306.
LibreCat
 
[20]
2001 | Journal Article | LibreCat-ID: 8922
Sextro W. Heat and Wear Generation for Rolling Contacts. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM). 2001;81:225-226.
LibreCat
 
[19]
2001 | Conference Paper | LibreCat-ID: 8923
Sextro W. Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction. In: ASME Design Engineering Technical Conferences. Pittsburgh, Pennsylvania, USA; 2001:1-12.
LibreCat
 
[18]
2001 | Journal Article | LibreCat-ID: 8924
Sextro W, Popp K, Krzyzynski T. Localization in Nonlinear Mistuned Systems with Cyclic Symmetry. Nonlinear Dynamics. 2001;25(1-3):207-220. doi:10.1023/A:1012915002568
LibreCat | DOI
 
[17]
2000 | Journal Article | LibreCat-ID: 8918
Krzyzynski T, Popp K, Sextro W. On some regularities in dynamic response of cyclic periodic structures. Chaos, Solitons \& Fractals. 2000;11(10):1597-1609. doi:10.1016/S0960-0779(99)00080-6
LibreCat | DOI
 
[16]
2000 | Conference Paper | LibreCat-ID: 8919
Panning L, Sextro W, Popp K. Optimization of Interblade Friction Damper. In: International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME. Munich, Germany; 2000:1-8.
LibreCat
 
[15]
2000 | Conference Paper | LibreCat-ID: 8920
Sextro W. The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification. In: International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME. Munich, Germany; 2000:1-8.
LibreCat
 
[14]
1999 | Conference Paper | LibreCat-ID: 8909
Popp K, Sextro W. Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen. Heidelberg; 1999:21-38.
LibreCat
 
[13]
1999 | Conference Paper | LibreCat-ID: 8910
Sextro W. Experimental verification of a non-Hertzian contact model. In: International Conference on Computational Methods in Contact Mechanics. ; 1999:181-190.
LibreCat
 
[12]
1999 | Conference Paper | LibreCat-ID: 8911
Sextro W. Forced Vibration of Elastic Structures with Friction Contacts. In: ASME Design Engineering Technical Conferences. Las Vegas, Nevada, USA; 1999:1-10.
LibreCat
 
[11]
1999 | Journal Article | LibreCat-ID: 8912
Sextro W, Popp K. Ein ebenes Reibkontaktmodell zur Berechnung von Schaufelschwingungen mit Reibelementen. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM). 1999;79:311-312.
LibreCat
 
[10]
1999 | Conference Paper | LibreCat-ID: 8913
Sextro W, Popp K. Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW). Frankfurt am Main, Germany; 1999:56.
LibreCat
 
[9]
1998 | Conference Paper | LibreCat-ID: 8907
Sextro W, Popp K, Wolter I. Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers. In: International Congress on Combustion Engines, Proceedings of the 22nd CIMAC. Vol 1. Kopenhagen, D{\"a}nemark; 1998:257-270.
LibreCat
 
[8]
1998 | Conference Paper | LibreCat-ID: 8908
Sextro W, Popp K, Wolter I. Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers. In: The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7. Vol B. Honolulu, Hawaii, USA; 1998:621-630.
LibreCat
 
[7]
1997 | Conference Paper | LibreCat-ID: 8902
Popp K, Sextro W. Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen. Frankfurt am Main, Germany; 1997:131-142.
LibreCat
 
[6]
1997 | Conference Paper | LibreCat-ID: 8903
Sextro W. Schwingungsverhalten von Schaufelkränzen mit Reibelementen bei Frequenzverstimmung. In: VDI-Reihe. Vol 11. VDI-Verlag, Düsseldorf; 1997.
LibreCat
 
[5]
1997 | Conference Paper | LibreCat-ID: 8904
Sextro W, Popp K, Wolter I. Improved reliability of bladed disks due to friction dampers. In: The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition. ; 1997.
LibreCat
 
[4]
1996 | Conference Paper | LibreCat-ID: 8896
Popp K, Sextro W. Schwingungsverhalten eines Schaufelkranzes mit Reibelementen bei Frequenzverstimmung. In: Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen. Frankfurt am Main, Germany; 1996:53-76.
LibreCat
 
[3]
1996 | Conference Paper | LibreCat-ID: 8897
Popp K, Sextro W. Dynamical Behaviour of a Bladed Disk with Friction Dampers. In: The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH. Vol 1. Prag; 1996:157-183.
LibreCat
 
[2]
1993 | Journal Article | LibreCat-ID: 8895
Sextro W, Schmalhorst B. Static Behaviour of Drill Strings in Curved Boreholes. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM). 1993;73:255-257.
LibreCat
 
[1]
1991 | Book Chapter | LibreCat-ID: 8894
Stelter P, Sextro W. Bifurcations in Dynamic Systems with Dry Friction. In: Seydel R, Schneider FW, Küpper T, Troger H, eds. Bifurcation and Chaos: Analysis, Algorithms, Applications. Vol 97. International Series of Numerical Mathematics / Internationale Schriftenreihe zur Numerischen Mathematik / S{\’e}rie Internationale d’Analyse Num{\’e}rique. Birkhäuser Basel; 1991:343-347. doi:10.1007/978-3-0348-7004-7_44
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: AMA

Export / Embed