Walter Sextro

Lehrstuhl für Dynamik und Mechatronik (LDM)
walter.sextro@uni-paderborn.de
ID
21220

198 Publications

Mark all

[198]
2024 | Journal Article | LibreCat-ID: 51518
O. K. Aimiyekagbon, A. Bender, T. Hemsel, and W. Sextro, “Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions,” Electronics, vol. 13, no. 3, Art. no. 521, 2024, doi: 10.3390/electronics13030521.
LibreCat | DOI
 
[197]
2023 | Conference Paper | LibreCat-ID: 46813 | OA
M. C. Wohlleben, L. Muth, S. Peitz, and W. Sextro, “Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits,” 2023, doi: 10.1002/pamm.202300039.
LibreCat | DOI | Download (ext.)
 
[196]
2023 | Conference Paper | LibreCat-ID: 47116 | OA
O. K. Aimiyekagbon, A. Löwen, A. Bender, L. Muth, and W. Sextro, “Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System,” in Proceedings of the Asia Pacific Conference of the PHM Society 2023 , 2023, vol. 4, no. 1, doi: 10.36001/phmap.2023.v4i1.3596.
LibreCat | DOI | Download (ext.)
 
[195]
2023 | Conference Abstract | LibreCat-ID: 51117
C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” presented at the 7th International Conference on Advanced Electromaterials (ICAE 2023), Jeju, Korea, 2023.
LibreCat
 
[194]
2023 | Conference Abstract | LibreCat-ID: 51118
C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” presented at the International Conference on Functional Materials & Devices 2023 (ICFMD 2023), Incheon, Korea, 2023.
LibreCat
 
[193]
2023 | Conference Abstract | LibreCat-ID: 51119
C. Scheidemann, O. E. C. Hagedorn, T. Hemsel, and W. Sextro, “Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process,” presented at the International Conference on Functional Materials & Devices 2023 (ICFMD 2023), Jeju, Korea, 2023.
LibreCat
 
[192]
2023 | Book Chapter | LibreCat-ID: 51338
J. Schütte and W. Sextro, “Einfluss der Radhubkinematik auf den Reifenverschleiß,” in 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, vol. 2425, VDI Verlag GmbH, 2023, pp. 165–180.
LibreCat
 
[191]
2022 | Conference Paper | LibreCat-ID: 29934
L. Muth, C. Noll, and W. Sextro, “Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data,” in Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021, Saint Petersburg, Russia, 2022, doi: 10.1007/978-3-031-07305-2_92.
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Book Chapter | LibreCat-ID: 29727
M. C. Wohlleben, A. Bender, S. Peitz, and W. Sextro, “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction,” in Machine Learning, Optimization, and Data Science, Cham: Springer International Publishing, 2022.
LibreCat | DOI | Download (ext.)
 
[189]
2022 | Conference Paper | LibreCat-ID: 30371
O. E. C. Hagedorn, M. Broll, O. Kirsch, T. Hemsel, and W. Sextro, “Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding,” in CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, Berlin, 2022, pp. 138–143.
LibreCat
 
[188]
2022 | Newspaper Article | LibreCat-ID: 47159
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “On the applicability of time series features as health indicators for technical systems operating under varying conditions,” Condition Monitor, no. 425, pp. 5–10, 2022.
LibreCat
 
[187]
2022 | Conference Paper | LibreCat-ID: 34104
C. Scheidemann, O. Kirsch, T. Hemsel, and W. Sextro, “Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding,” 2022, doi: 10.1109/estc55720.2022.9939478.
LibreCat | DOI
 
[186]
2022 | Patent | LibreCat-ID: 9980
K. Reinke, A. Bender, T. Meyer, W. Sextro, and J. K. Kimotho, “Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.” 2022.
LibreCat | Files available
 
[185]
2022 | Report | LibreCat-ID: 52045
C. Scheidemann, T. Hemsel, and W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022.
LibreCat | Files available | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 27652
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten ,” in VDI-Berichte 2391, Würzburg, 2021, pp. 197–210.
LibreCat
 
[183]
2021 | Journal Article | LibreCat-ID: 21436
R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,” Microelectronics Reliability, vol. 119, p. 114077, 2021, doi: https://doi.org/10.1016/j.microrel.2021.114077.
LibreCat | DOI
 
[182]
2021 | Conference Paper | LibreCat-ID: 22724 | OA
A. Bender and W. Sextro, “Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties,” in Proceedings of the European Conference of the PHM Society 2021, 2021, vol. 6, no. 1, doi: https://doi.org/10.36001/phme.2021.v6i1.2843 .
LibreCat | DOI | Download (ext.)
 
[181]
2021 | Conference Paper | LibreCat-ID: 22507 | OA
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “On the applicability of time series features as health indicators for technical systems operating under varying conditions,” presented at the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat | Files available
 
[180]
2021 | Conference Paper | LibreCat-ID: 27111 | OA
O. K. Aimiyekagbon, L. Muth, M. C. Wohlleben, A. Bender, and W. Sextro, “Rule-based Diagnostics of a Production Line,” in Proceedings of the European Conference of the PHM Society 2021, 2021, vol. 6, no. 1, pp. 527–536, doi: 10.36001/phme.2021.v6i1.3042.
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 27508 | OA
J. Schütte and W. Sextro, “Tire Wear Reduction Based on an Extended Multibody Rear Axle Model,” Vehicles, pp. 233–256, 2021, doi: 10.3390/vehicles3020015.
LibreCat | DOI | Download (ext.)
 
[178]
2021 | Journal Article | LibreCat-ID: 29293 | OA
S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,” Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi: 10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[177]
2020 | Conference Paper | LibreCat-ID: 17355
R. Schemmel, C. Scheidemann, T. Hemsel, O. Kirsch, and W. Sextro, “Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding,” in CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 2020, pp. 1–6.
LibreCat
 
[176]
2020 | Book | LibreCat-ID: 9857
K. Magnus, K. Popp, and W. Sextro, Schwingungen. Springer Vieweg Wiesbaden, 2020.
LibreCat | DOI
 
[175]
2020 | Conference Paper | LibreCat-ID: 17706
R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,” 2020, doi: 10.1109/eurosime48426.2020.9152679.
LibreCat | DOI
 
[174]
2020 | Conference Paper | LibreCat-ID: 17810
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data,” in PHM Society European Conference, 2020, vol. 5, no. 1.
LibreCat
 
[173]
2020 | Book Chapter | LibreCat-ID: 22007
J. Schütte and W. Sextro, “Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear,” in Lecture Notes in Mechanical Engineering, Cham, 2020.
LibreCat | DOI
 
[172]
2020 | Patent | LibreCat-ID: 9981
K. Reinke, A. Bender, T. Meyer, W. Sextro, and J. K. Kimotho, “Patent EP 3 358 332 B1: Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts.” 2020.
LibreCat | Files available
 
[171]
2019 | Conference Paper | LibreCat-ID: 23716
T. Kaul, J. Hentze, W. Sextro, and I. Gräßler, “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung,” in Fachtagung Mechatronik 2019 Paderborn, 2019, pp. 19–24.
LibreCat
 
[170]
2019 | Conference Paper | LibreCat-ID: 15475
J. Schütte, W. Sextro, and S. Kohl, “Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen,” in Fachtagung Mechatronik 2019, Paderborn, 2019.
LibreCat | DOI
 
[169]
2019 | Conference Paper | LibreCat-ID: 14852
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, and W. Sextro, “Atomization of Fluids with Ultrasound,” in Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019), Enschede, The Netherlands, 2019, pp. 140–143.
LibreCat | Files available
 
[168]
2019 | Conference Paper | LibreCat-ID: 15244
O. E. C. Hagedorn, D. Pielsticker, T. Hemsel, and W. Sextro, “Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen,” in 2. VDI-Fachtagung Schwingungen 2019, 2019.
LibreCat
 
[167]
2019 | Book | LibreCat-ID: 10002
W. Sextro and M. Brökelmann, Intelligente Herstellung zuverlässiger Kupferbondverbindungen, vol. VIII. Springer Verlag, 2019.
LibreCat | DOI
 
[166]
2019 | Conference Paper | LibreCat-ID: 10255
A. Bender, K. Reinke, and W. Sextro, “Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement,” in 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, 2019, vol. VDI-Berichte 2346, pp. 241–248.
LibreCat
 
[165]
2019 | Conference Paper | LibreCat-ID: 10257
T. Kaul, J. Hentze, W. Sextro, and I. Gräßler, “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung,” in Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
 
[164]
2019 | Conference Paper | LibreCat-ID: 10258
P. Dunst, T. Hemsel, P. Bornmann, W. Littmann, and W. Sextro, “Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten,” in DAGA 2019, Rostock, 2019.
LibreCat
 
[163]
2019 | Journal Article | LibreCat-ID: 10334
R. Schemmel, T. Hemsel, C. Dymel, M. Hunstig, M. Brökelmann, and W. Sextro, “Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding,” Sensors and Actuators A: Physical, vol. 295, pp. 653–662, 2019, doi: 10.1016/j.sna.2019.04.025.
LibreCat | DOI
 
[162]
2019 | Conference Paper | LibreCat-ID: 13460 | OA
A. Bender, L. Schinke, and W. Sextro, “Remaining useful lifetime prediction based on adaptive failure thresholds,” in Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), Hannover, 2019, no. 29, pp. 1262–1269.
LibreCat | Download (ext.)
 
[161]
2019 | Conference Paper | LibreCat-ID: 13461 | OA
T. Kaul, A. Bender, and W. Sextro, “Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems,” in Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), Hannover, 2019, no. 29, pp. 2340–2347.
LibreCat | Download (ext.)
 
[160]
2018 | Conference Paper | LibreCat-ID: 9987
A. Bender and W. Sextro, “A particle filtering approach for temperature based prognostics,” in Safety and Reliability – Safe Societies in a Changing World, 2018, pp. 1025–1033.
LibreCat
 
[159]
2018 | Journal Article | LibreCat-ID: 9990
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, and W. Sextro, “Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders,” ACTUATOR 2018; 16th International Conference on New Actuators, pp. 142–145, 2018.
LibreCat
 
[158]
2018 | Journal Article | LibreCat-ID: 9991
P. Dunst, P. Bornmann, T. Hemsel, and W. Sextro, “Vibration-Assisted Handling of Dry Fine Powders,” Actuators 2018, 7(2)., pp. 1–11, 2018.
LibreCat | DOI
 
[157]
2018 | Conference Paper | LibreCat-ID: 9992
C. Dymel et al., “Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process,” in (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1–6.
LibreCat
 
[156]
2018 | Conference Paper | LibreCat-ID: 9993
C. Dymel, R. Schemmel, T. Hemsel, W. Sextro, M. Brökelmann, and M. Hunstig, “Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding,” in (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.
LibreCat
 
[155]
2018 | Book | LibreCat-ID: 9995
T. Meyer, T. Kaul, J. K. Kimotho, and W. Sextro, Steigerung der Intelligenz mechatronischer Systeme, vol. Steigerung der Verlässlichkeit technischer Systeme. Springer Nature Switzerland AG. Part of Springer Nature., 2018, pp. 193–213.
LibreCat
 
[154]
2018 | Conference Paper | LibreCat-ID: 9997
R. Schemmel, S. Althoff, W. Sextro, A. Unger, M. Brökelmann, and M. Hunstig, “Effects of different working frequencies on the joint formation in copper wire bonding,” in CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018), 2018, pp. 230–235.
LibreCat
 
[153]
2018 | Conference Paper | LibreCat-ID: 9998
R. Schemmel, T. Hemsel, and W. Sextro, “Numerical and experimental investigations in ultrasonic heavy wire bonding,” in 6th European Conference on Computational Mechanics (ECCM 6), 2018, pp. 1–12.
LibreCat
 
[152]
2018 | Conference Paper | LibreCat-ID: 9999
A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, and W. Sextro, “Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges,” in In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018, vol. Vol. 2018, No. 1, pp. 000572-000577.
LibreCat | DOI
 
[151]
2017 | Conference Paper | LibreCat-ID: 23560
J. Hentze, T. Kaul, I. Gräßler, and W. Sextro, “Integrated modeling of behavior and reliability in system development,” in ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB, Vancouver, Kanada, 21. - 25. Aug. 2017, 2017, pp. 385–394.
LibreCat
 
[150]
2017 | Conference Paper | LibreCat-ID: 9969
A. Bender, T. Kaul, and W. Sextro, “Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente,” in Verlagsschriftenreihe des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, 2017, pp. 347–358.
LibreCat
 
[149]
2017 | Conference Paper | LibreCat-ID: 9970
A. Bender, J. K. Kimotho, S. Kohl, W. Sextro, and K. Reinke, “Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen,” in 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123–125.
LibreCat
 
[148]
2017 | Conference Paper | LibreCat-ID: 9971
A. Bender, W. Sextro, and K. Reinke, “Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen,” in VDI-Berichte 2301, 2017, pp. 49–60.
LibreCat
 
[147]
2017 | Journal Article | LibreCat-ID: 9972
P. Dunst, T. Hemsel, and W. Sextro, “Analysis of pipe vibration in an ultrasonic powder transportationsystem,” elsevier, vol. Sensors and Actuators A 263, pp. 733–736, 2017.
LibreCat
 
[146]
2017 | Journal Article | LibreCat-ID: 9973
P. Eichwald et al., “Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design,” IMAPSource, vol. Vol. 2017, No. 1, 2017.
LibreCat
 
[145]
2017 | Conference Paper | LibreCat-ID: 9974
J. Hentze, T. Kaul, I. Grässler, and W. Sextro, “Integrated modeling og behavior and reliability in system development,” in ICED17, 21st International conference on enginieering design, 2017, pp. 385–394.
LibreCat
 
[144]
2017 | Journal Article | LibreCat-ID: 9976
T. Kaul, T. Meyer, and W. Sextro, “Formulation of reliability-related objective functions for design of intelligent mechatronic systems,” SAGE Journals, vol. Vol. 231(4), pp. 390–399, 2017.
LibreCat | DOI
 
[143]
2017 | Conference Paper | LibreCat-ID: 9978
J. K. Kimotho, W. Sextro, and T. Hemsel, “Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing,” in IEEE Transactions on Reliability, 2017, pp. 1–10.
LibreCat | DOI
 
[142]
2017 | Conference Paper | LibreCat-ID: 9982
R. Schemmel, T. Hemsel, and W. Sextro, “MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall,” in 43. Deutsche Jahrestagung für Akustik, 2017, pp. 611–614.
LibreCat
 
[141]
2017 | Conference Paper | LibreCat-ID: 9983
S. Schulze, W. Sextro, and K. Kister, “Model based optimization of dynamics in adaptive headlamps,” in Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
 
[140]
2017 | Conference Paper | LibreCat-ID: 9985
W. Sextro, T. Meyer, T. Kaul, and J. K. Kimotho, “Entwicklung verlässlicher, intelligenter Systeme,” in VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung und Betrieb zuverlässiger Produkte., 2017, pp. 17–30.
LibreCat
 
[139]
2016 | Conference Paper | LibreCat-ID: 9955
S. Althoff, T. Meyer, A. Unger, W. Sextro, and F. Eacock, “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools,” in IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110.
LibreCat | DOI
 
[138]
2016 | Journal Article | LibreCat-ID: 9957
M. Brökelmann et al., “Kupferbondverbindungen intelligent herstellen,” wt-online, vol. 7/8, pp. 512–519, 2016.
LibreCat
 
[137]
2016 | Conference Paper | LibreCat-ID: 9958
P. Dunst, W. Sextro, P. Bornmann, T. Hemsel, and W. Littmann, “Transportation of dry fine powders by coordinated friction manipulation,” in PAMM Proc. Appl. Math. Mech. 16, 2016, pp. 635–636.
LibreCat | DOI
 
[136]
2016 | Conference Paper | LibreCat-ID: 9960
P. Eichwald et al., “Micro Wear Modeling in Copper Wire Wedge Bonding,” in IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
 
[135]
2016 | Conference Paper | LibreCat-ID: 9961
T. Kaul, T. Meyer, and W. Sextro, “Modeling of Complex Redundancy in Technical Systems with Bayesian Networks,” in Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
 
[134]
2016 | Conference Paper | LibreCat-ID: 9963
S. Kohl, W. Sextro, and S. Schulze, “Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS,” in The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 2016, pp. 1–12.
LibreCat
 
[133]
2016 | Conference Paper | LibreCat-ID: 9964
C. Lessmeier, J. K. Kimotho, D. Zimmer, and W. Sextro, “Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification,” in European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
 
[132]
2016 | Conference Paper | LibreCat-ID: 9966
T. Meyer et al., “Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation,” in IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622–628.
LibreCat | DOI
 
[131]
2016 | Conference Paper | LibreCat-ID: 9967
S. Schulze, W. Sextro, and S. Kohl, “Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems,” in 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1–11.
LibreCat
 
[130]
2016 | Conference Paper | LibreCat-ID: 9968
A. Unger et al., “Validated Simulation of the Ultrasonic Wire Bonding Process,” in Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 2016, pp. 251–254.
LibreCat
 
[129]
2015 | Conference Paper | LibreCat-ID: 9943
S. Althoff, A. Unger, W. Sextro, and F. Eacock, “Improving the cleaning process in copper wire bonding by adapting bonding parameters,” in 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6.
LibreCat | DOI
 
[128]
2015 | Journal Article | LibreCat-ID: 9944
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, and B. Zeqiri, “Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler,” tm - Technisches Messen, vol. 82, no. 2, pp. 73–84, 2015.
LibreCat | DOI
 
[127]
2015 | Conference Paper | LibreCat-ID: 9945
T. Kaul, T. Meyer, and W. Sextro, “Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme,” in 10. Paderborner Workshop Entwurf mechatronischer Systeme, 2015, pp. 101–112.
LibreCat
 
[126]
2015 | Conference Paper | LibreCat-ID: 9946
T. Kaul, T. Meyer, and W. Sextro, “Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems,” in European Safety and Reliability Conference (ESREL2015), 2015.
LibreCat | DOI
 
[125]
2015 | Conference Paper | LibreCat-ID: 9947
J. K. Kimotho and W. Sextro, “Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics,” in Annual Conference of the Prognostics and Health Management Society 2015, 2015, vol. 6.
LibreCat
 
[124]
2015 | Conference Paper | LibreCat-ID: 9949
T. Meyer, T. Kaul, and W. Sextro, “Advantages of reliability-adaptive system operation for maintenance planning,” in Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 2015, pp. 940–945.
LibreCat | DOI
 
[123]
2015 | Conference Paper | LibreCat-ID: 9950
T. Meyer, J. K. Kimotho, and W. Sextro, “Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme,” in 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung und Betrieb zuverlässiger Produkte, 2015, no. 2260, pp. 111–122.
LibreCat
 
[122]
2015 | Conference Paper | LibreCat-ID: 9951
T. Meyer et al., “Modeling and simulation of the ultrasonic wire bonding process,” in 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat | DOI
 
[121]
2015 | Conference Paper | LibreCat-ID: 9952
F. Schulte, J. Neuhaus, and W. Sextro, “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties,” in Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–1117.
LibreCat
 
[120]
2015 | Conference Paper | LibreCat-ID: 9954
A. Unger et al., “Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear,” in 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat | DOI
 
[119]
2014 | Book | LibreCat-ID: 25168
J. Gausemeier, F.-J. Rammig, W. Schäfer, and W. Sextro, Dependability of Self-Optimizing Mechatronic Systems. Heidelberg, Germany: Springer-Verlag, 2014.
LibreCat
 
[118]
2014 | Book Chapter | LibreCat-ID: 25173
M. Dellnitz et al., “Self-optimizing Mechatronic Systems,” in Dependability of Self-optimizing Mechatronic Systems, Kapitel: 1.1, Heidelberg, Germany: Springer-Verlag, 2014, pp. 3–12.
LibreCat
 
[117]
2014 | Book Chapter | LibreCat-ID: 28394
R. Dorociak, J. Gausemeier, P. Iwanek, T. Meyer, W. Sextro, and C. Sondermann-W{\"o}lke, “Development of the Active Guidance Module,” in Dependability of Self-optimizing Mechatronic Systems, AACE Press, 2014, pp. 178–182.
LibreCat
 
[116]
2014 | Book | LibreCat-ID: 28396
J. Gausemeier, F.-J. Rammig, Wilhelm Sch{\"a}fer, and W. Sextro, Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany, 2014.
LibreCat
 
[115]
2014 | Book Chapter | LibreCat-ID: 28399
R. Dorociak, J{\"u}rgen Gausemeier, Peter Iwanek, T. Meyer, and W. Sextro, “Selecting Suitable Methods Using the Methodology,” in Dependability of Self-optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–178.
LibreCat
 
[114]
2014 | Book Chapter | LibreCat-ID: 28400
R. Dorociak, J. Gausemeier, P. Iwanek, T. Meyer, and W. Sextro, “Selecting Suitable Methods Using the Methodology,” in Dependability of Self-optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–178.
LibreCat
 
[113]
2014 | Book Chapter | LibreCat-ID: 28410
P. Iwanek, T. Meyer, C. Priesterjahn, W. Sextro, and M. Va{\ss}holz, “Challenges,” in Dependability of Self-optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2014, pp. 12–15.
LibreCat
 
[112]
2014 | Conference Paper | LibreCat-ID: 9868
S. Althoff, J. Neuhaus, T. Hemsel, and W. Sextro, “Improving the bond quality of copper wire bonds using a friction model approach,” in Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–1555.
LibreCat | DOI
 
[111]
2014 | Conference Paper | LibreCat-ID: 9869
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, and B. Zeqiri, “Self-Sensing Ultrasound Transducer for Cavitation Detection,” in 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663–666.
LibreCat | DOI
 
[110]
2014 | Conference Paper | LibreCat-ID: 9871
P. Eichwald et al., “Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding,” in Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856–861.
LibreCat | DOI
 
[109]
2014 | Book | LibreCat-ID: 9873
J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Dependability of Self-Optimizing Mechatronic Systems, vol. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014.
LibreCat
 
[108]
2014 | Journal Article | LibreCat-ID: 9874
T. Hemsel, P. Bornmann, T. Morita, C. Sondermann-Wölke, and W. Sextro, “Reliability analysis of ultrasonic power transducers,” Archive of Applied Mechanics, pp. 1–7, 2014.
LibreCat | DOI
 
[107]
2014 | Journal Article | LibreCat-ID: 9876
M. Hunstig, T. Hemsel, and W. Sextro, “High-velocity operation of piezoelectric inertia motors: experimental validation,” Archive of Applied Mechanics, pp. 1–9, 2014.
LibreCat | DOI
 
[106]
2014 | Conference Paper | LibreCat-ID: 9879
J. K. Kimotho, T. Meyer, and W. Sextro, “PEM fuel cell prognostics using particle filter with model parameter adaptation,” in Prognostics and Health Management (PHM), 2014 IEEE Conference on, 2014, pp. 1–6.
LibreCat | DOI
 
[105]
2014 | Conference Paper | LibreCat-ID: 9880
J. K. Kimotho and W. Sextro, “An approach for feature extraction and selection from non-trending data for machinery prognosis,” in Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, 2014, vol. 5.
LibreCat
 
[104]
2014 | Journal Article | LibreCat-ID: 9881
J. K. Kimotho and W. Sextro, “Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation,” PAMM, vol. 14, no. 1, pp. 815–816, 2014.
LibreCat | DOI
 
[103]
2014 | Journal Article | LibreCat-ID: 9882
S. Kohl, W. Sextro, and A. Zuber, “Tire footprint analysis depending on the elastokinematics of a multi-link suspension system using multi-body dynamics simulation,” PAMM, vol. 14, no. 1, pp. 65–66, 2014.
LibreCat | DOI
 
[102]
2014 | Book Chapter | LibreCat-ID: 9883
T. Meyer, C. Priesterjahn, and W. Sextro, “Conclusion and Outlook,” in Dependability of Self-Optimizing Mechatronic Systems, J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Eds. Springer Berlin Heidelberg, 2014, pp. 189–190.
LibreCat | DOI
 
[101]
2014 | Journal Article | LibreCat-ID: 9885
T. Meyer , C. Sondermann-Wölke, and W. Sextro, “Method to Identify Dependability Objectives in Multiobjective Optimization Problem,” Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence, vol. 15, pp. 46–53, 2014.
LibreCat | DOI
 
[100]
2014 | Conference Paper | LibreCat-ID: 9887
J. Neuhaus and W. Sextro, “Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements,” in Proceedings of the 5th International Conference on Computational Methods, 2014.
LibreCat
 
[99]
2014 | Journal Article | LibreCat-ID: 9888
S. Schulze, W. Sextro, and F. Grüter, “Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications,” PAMM, vol. 14, no. 1, pp. 39–40, 2014.
LibreCat | DOI
 
[98]
2014 | Conference Paper | LibreCat-ID: 9889
C. Sprock and W. Sextro, “Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending,” in Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 2014, pp. 320–324.
LibreCat | DOI
 
[97]
2014 | Conference Paper | LibreCat-ID: 9890
C. Sprock and W. Sextro, “Time-efficient analysis of nonlinear dynamic behavior.,” in Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, 2014, pp. 293–294.
LibreCat
 
[96]
2014 | Conference Paper | LibreCat-ID: 9891
C. Sprock and W. Sextro, “Time-efficient analysis of nonlinear peak bending behavior.,” in Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 2014, pp. 1–8.
LibreCat
 
[95]
2014 | Conference Paper | LibreCat-ID: 9892
C. Sprock and W. Sextro, “Vibration Analysis of Mechanical Structures using Multisine Excitation Techniques,” in Proceedings of 31st Danubia-Adria Symposium. 2014, 2014.
LibreCat
 
[94]
2014 | Book Chapter | LibreCat-ID: 9893
A. Trächtler et al., “Introduction to Self-optimization and Dependability,” in Dependability of Self-Optimizing Mechatronic Systems, J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Eds. Springer Berlin Heidelberg, 2014, pp. 1–24.
LibreCat | DOI
 
[93]
2014 | Book Chapter | LibreCat-ID: 9894
A. Trächtler et al., “Case Study,” in Dependability of Self-Optimizing Mechatronic Systems, J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Eds. Springer Berlin Heidelberg, 2014, pp. 173–188.
LibreCat | DOI
 
[92]
2014 | Conference Paper | LibreCat-ID: 9895
A. Unger et al., “Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds,” in Proceedings of the 47th International Symposium on Microelectronics (IMAPS), 2014, pp. 289–294.
LibreCat
 
[91]
2014 | Conference Paper | LibreCat-ID: 9896
A. Unger et al., “Data-driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding,” in Proceedings of 8th International Conference on Integrated Power Electronic Systems, 2014, vol. 141, pp. 175–180.
LibreCat
 
[90]
2013 | Conference Paper | LibreCat-ID: 26973
T. Meyer, J. H. Kessler, W. Sextro, and A. Trächtler, “Increasing Intelligent Systems’ Reliability by using Reconfiguration,” 2013.
LibreCat
 
[89]
2013 | Book Chapter | LibreCat-ID: 23139
J. H. Kessler, T. Meyer, W. Sextro, C. Sondermann-Wölke, and A. Trächtler, “Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept,” in Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 55–62.
LibreCat
 
[88]
2013 | Conference Paper | LibreCat-ID: 23140
T. Meyer, J. H. Kessler, W. Sextro, and A. Trächtler, “Increasing Intelligent Systems’ Reliability by using Reconfiguration,” in The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
 
[87]
2013 | Book Chapter | LibreCat-ID: 23149
C. Hölscher et al., “Applications of Self-Optimizing Systems,” in Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 16–22.
LibreCat
 
[86]
2013 | Journal Article | LibreCat-ID: 9794
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Increasing the power of piezoelectric energy harvesters by magnetic stiffening,” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, pp. 1332–1342, 2013.
LibreCat | DOI
 
[85]
2013 | Journal Article | LibreCat-ID: 9795
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments,” Sensors and Actuators A: Physical, vol. 200, pp. 138–146, 2013.
LibreCat | DOI
 
[84]
2013 | Conference Paper | LibreCat-ID: 9796
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems,” in Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, 2013, no. 05/2013, pp. 159–161.
LibreCat
 
[83]
2013 | Conference Paper | LibreCat-ID: 9797
S. Althoff, J. Neuhaus, T. Hemsel, and W. Sextro, “A friction based approach for modeling wire bonding,” in IMAPS 2013, 46th International Symposium on Microelectronics, 2013.
LibreCat | DOI
 
[82]
2013 | Conference Paper | LibreCat-ID: 9799
P. Eichwald et al., “Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding,” in 15th Electronics Packaging Technology Conference, 2013.
LibreCat | DOI
 
[81]
2013 | Conference Paper | LibreCat-ID: 9801
M. Hunstig, W. Al-Ashtari, T. Hemsel, and W. Sextro, “Leistungs- und Bandbreitensteigerung von Energy-Harvesting-Generatoren für Energieautarke Systeme,” in 9. Paderborner Workshop Entwurf mechatronischer Systeme, 2013, pp. 359–372.
LibreCat
 
[80]
2013 | Conference Paper | LibreCat-ID: 9802
M. Hunstig, T. Hemsel, and W. Sextro, “High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation,” in Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, 2013, pp. 16–18.
LibreCat
 
[79]
2013 | Journal Article | LibreCat-ID: 9803
M. Hunstig, T. Hemsel, and W. Sextro, “Modelling the friction contact in an inertia motor,” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, pp. 1380–1391, 2013.
LibreCat | DOI
 
[78]
2013 | Journal Article | LibreCat-ID: 9804
M. Hunstig, T. Hemsel, and W. Sextro, “Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation,” Sensors and Actuators A: Physical, vol. 200, pp. 79–89, 2013.
LibreCat | DOI
 
[77]
2013 | Journal Article | LibreCat-ID: 9805
M. Hunstig, T. Hemsel, and W. Sextro, “Stick-slip and slip-slip operation of piezoelectric inertia drives - Part I: Ideal Excitation.,” Sensors and Actuators A: Physical, vol. 200, pp. 90–100, 2013.
LibreCat | DOI
 
[76]
2013 | Journal Article | LibreCat-ID: 9807
J. K. Kimotho, C. Sondermann-Wölke, T. Meyer, and W. Sextro, “Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization,” Chemical Engineering Transactions, vol. 33, pp. 619–624, 2013.
LibreCat | DOI
 
[75]
2013 | Journal Article | LibreCat-ID: 9808
J. K. Kimotho, C. Sondermann-Wölke, T. Meyer, and W. Sextro, “Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation,” International Journal of Prognostics and Health Management, vol. 4, no. 2, 2013.
LibreCat
 
[74]
2013 | Conference Paper | LibreCat-ID: 9855
S. Kohl, A. Zuber, and W. Sextro, “Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems,” in Proc. Appl. Math. Mech., 2013, vol. 13, pp. 23–24.
LibreCat | DOI
 
[73]
2013 | Conference Paper | LibreCat-ID: 9858
T. Meyer, C. Hölscher, M. Menke, W. Sextro, and D. Zimmer, “Multiobjective Optimization including Safety of Operation Applied to a Linear Drive System,” in Proc. Appl. Math. Mech., 2013, vol. 13, pp. 483–484.
LibreCat | DOI
 
[72]
2013 | Conference Paper | LibreCat-ID: 9859
T. Meyer , J. Henning Keßler, W. Sextro, and A. Trächtler, “Increasing Intelligent Systems’ Reliability by Using Reconfiguration,” in Proceedings of the Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat | DOI
 
[71]
2013 | Journal Article | LibreCat-ID: 9860
T. Meyer, C. Sondermann-Wölke, J. K. Kimotho, and W. Sextro, “Controlling the Remaining Useful Lifetime using Self-Optimization,” Chemical Engineering Transactions, vol. 33, pp. 625–630, 2013.
LibreCat | DOI
 
[70]
2013 | Conference Paper | LibreCat-ID: 9861
T. Meyer, C. Sondermann-Wölke, W. Sextro, M. Riedl, A. Gouberman, and M. Siegle, “Bewertung der Zuverlässigkeit selbstoptimierender Systeme mit dem LARES-Framework,” in 9. Paderborner Workshop Entwurf mechatronischer Systeme, 2013, pp. 161–174.
LibreCat
 
[69]
2012 | Journal Article | LibreCat-ID: 9781
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Frequency tuning of piezoelectric energy harvesters by magnetic force,” Smart Materials and Structures, vol. 21, no. 3, p. 035019, 2012.
LibreCat
 
[68]
2012 | Journal Article | LibreCat-ID: 9782
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Analytical determination of characteristic frequencies and equivalent circuit parameters of a piezoelectric bimorph,” Journal of Intelligent Material Systems and Structures, vol. 23, no. 1, pp. 15–23, 2012.
LibreCat | DOI
 
[67]
2012 | Conference Paper | LibreCat-ID: 9783
P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, and T. Morita, “Non-perturbing cavitation detection / monitoring in sonochemical reactors,” in Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–1144.
LibreCat | DOI
 
[66]
2012 | Conference Paper | LibreCat-ID: 9787
S. Kohl, W. Sextro, and A. Zuber, “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie,” in 8. Tag des Fahrwerks, Aachen, 2012, 2012, pp. 38–60.
LibreCat
 
[65]
2012 | Conference Paper | LibreCat-ID: 9791
C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, and W. Sextro, “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution,” in Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012), 2012.
LibreCat
 
[64]
2012 | Journal Article | LibreCat-ID: 9806
M. Hunstig, T. Hemsel, and W. Sextro, “Analysis of different operation modes for inertia motors,” ACTUATOR 2012 Conference Proceedings, pp. 761–764, 2012.
LibreCat
 
[63]
2011 | Conference Paper | LibreCat-ID: 26981
C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” 2011.
LibreCat
 
[62]
2011 | Conference Paper | LibreCat-ID: 23184
O. Lurye, C. Sondermann-Wölke, I. Kromov, W. Sextro, and A. Trächtler, “Verlässlichkeitsanalyse des Degradationsverhaltens mechatronischer Systeme mit mehreren Betriebsstrategien,” in VDI Bericht zur Tagung Technische Zuverlässigkeit, 2011.
LibreCat
 
[61]
2011 | Conference Paper | LibreCat-ID: 23194
C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” in Technische Zuverlässigkeit TTZ, 2011.
LibreCat
 
[60]
2011 | Conference Paper | LibreCat-ID: 9768
O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, and W. Sextro, “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies,” in 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte, 2011, pp. 99–110.
LibreCat
 
[59]
2011 | Conference Paper | LibreCat-ID: 9771
C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” in 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte, 2011, pp. 291–302.
LibreCat
 
[58]
2011 | Journal Article | LibreCat-ID: 9772
C. Tomberger, P. Dietmaier, W. Sextro, and K. Six, “Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature,” Wear, vol. 271, pp. 2–12, 2011.
LibreCat | DOI
 
[57]
2011 | Patent | LibreCat-ID: 9790
W. Sextro, M. Hunstig, P. Bornmann, and T. Hemsel, “Patent DE10201003395: Anordnung und Verfahren zur mehrdimensionalen Messung von Schwingungen eines Objekts. .” 2011.
LibreCat
 
[56]
2010 | Journal Article | LibreCat-ID: 9747
J. S. Hölzl and W. Sextro, “Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen,” PAMM, vol. 10, no. 1, pp. 247–248, 2010.
LibreCat | DOI
 
[55]
2010 | Journal Article | LibreCat-ID: 9748
J. S. Hölzl and W. Sextro, “Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces,” SAE International Journal of Passenger Cars- Mechanical Systems, pp. 929–935, 2010.
LibreCat | DOI
 
[54]
2010 | Conference Paper | LibreCat-ID: 9753
M. Hunstig, T. Hemsel, and W. Sextro, “Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren,” in 7. Paderborner Workshop Entwurf mechatronischer Systeme, 2010, vol. 272, pp. 129–141.
LibreCat
 
[53]
2010 | Conference Paper | LibreCat-ID: 9754
M. Hunstig, T. Hemsel, and W. Sextro, “Improving the Performance of Piezoelectric Inertia Motors,” in ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–661.
LibreCat
 
[52]
2010 | Conference Paper | LibreCat-ID: 9760
C. Sondermann-Wölke, T. Hemsel, W. Sextro, J. Gausemeier, and S. Pook, “Guideline for the dependability-oriented design of self-optimizing systems,” in Industrial Informatics (INDIN), 2010 8th IEEE International Conference on, 2010, pp. 739–744.
LibreCat | DOI
 
[51]
2010 | Journal Article | LibreCat-ID: 9761
C. Sondermann-Wölke and W. Sextro, “Integration of Condition Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance Module,” International Journal On Advances in Intelligent Systems, vol. 3, no. 1–3, pp. 65–74, 2010.
LibreCat
 
[50]
2010 | Conference Paper | LibreCat-ID: 9762
C. Sondermann-Wölke, W. Sextro, J. Geisler, and A. Trächtler, “Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls,” in Entwurf mechatronischer Systeme, 2010, vol. 272, pp. 411–420.
LibreCat
 
[49]
2010 | Conference Paper | LibreCat-ID: 9763
C. Sondermann-Wölke, J. Geisler, and W. Sextro, “Increasing the reliability of a self-optimizing railway guidance system,” in Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6.
LibreCat | DOI
 
[48]
2010 | Journal Article | LibreCat-ID: 9764
C. Tomberger, P. Dietmaier, R. Martin, W. Sextro, and K. Six, “Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den Kraftschluss zwischen Rad und Schiene,” ZEVrail, vol. 134, pp. 127–135, 2010.
LibreCat
 
[47]
2009 | Conference Paper | LibreCat-ID: 9742
C. Sondermann-Wölke and W. Sextro, “Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules,” in Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:, 2009, pp. 15–20.
LibreCat | DOI
 
[46]
2007 | Conference Paper | LibreCat-ID: 9560
A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, and J. Neges, “Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe,” in 27. Internationales Mju-Symposium/Bremsen-Fachtagung, 2007, no. 657, pp. 29–49.
LibreCat
 
[45]
2007 | Conference Paper | LibreCat-ID: 9561
A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, and J. Neges, “Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc,” in 27. Internationales Mju-Symposium/Bremsen-Fachtagung, 2007, no. 657, pp. 144–163.
LibreCat
 
[44]
2007 | Conference Paper | LibreCat-ID: 9563
A. Genzo, W. Sextro, and L. Panning, “Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten,” in VDI-Berichte, 2007, vol. 2022, pp. 147–161.
LibreCat
 
[43]
2007 | Journal Article | LibreCat-ID: 9567
J. Szwedowicz, R. Visser, W. Sextro, and P. A. Masserey, “On Nonlinear Forced Vibration of Shrouded Turbine Blades,” Journal of Turbomachinery, vol. 130, no. 1, pp. 011002–011002, 2007.
LibreCat
 
[42]
2006 | Conference Paper | LibreCat-ID: 9535
A. Genzo and W. Sextro, “Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts,” in Proceedings of ISMA - International conference on noise and vibration engineering, 2006, pp. 51–52.
LibreCat
 
[41]
2006 | Book Chapter | LibreCat-ID: 9536
F. Gutzeit, W. Sextro, and M. Kröger, “Unsteady rolling contact of rubber wheels,” in Analysis and Simulation of Contact Problems, vol. 27, P. Wriggers and U. Nackenhorst, Eds. Springer Berlin Heidelberg, 2006, pp. 261–270.
LibreCat | DOI
 
[40]
2006 | Conference Paper | LibreCat-ID: 9542
A. Hofmeisterro, W. Sextro, and O. Röschel, “Error-Workspace Analysis of Plane Mechanisms,” in Proceedings of EUCOMES, the first European Conference on Mechanism Science, 2006, pp. 1–12.
LibreCat
 
[39]
2006 | Book Chapter | LibreCat-ID: 9551
W. Sextro, P. Moldenhauer, M. Wangenheim, M. Lindner, and M. Kröger, “Contact behaviour of a sliding rubber element,” in Analysis and Simulation of Contact Problems, vol. 27, P. Wriggers and U. Nackenhorst, Eds. Springer Berlin Heidelberg, 2006, pp. 243–252.
LibreCat | DOI
 
[38]
2005 | Journal Article | LibreCat-ID: 9266
A. Genzo, W. Sextro, and K. Popp, “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts,” PAMM, vol. 5, no. 1, pp. 91–92, 2005.
LibreCat | DOI
 
[37]
2005 | Journal Article | LibreCat-ID: 9526
A. Genzo, W. Sextro, and K. Popp, “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts,” PAMM, vol. 5, no. 1, pp. 91–92, 2005.
LibreCat | DOI
 
[36]
2005 | Journal Article | LibreCat-ID: 9529
A. Hofmeister, W. Sextro, and O. Röschel, “Unkontrollierbare Bewegungen ebener Mechanismen mit Gelenkspiel,” PAMM, vol. 5, no. 1, pp. 201–202, 2005.
LibreCat | DOI
 
[35]
2004 | Conference Paper | LibreCat-ID: 8952
F. Götting, W. Sextro, L. Panning, and K. Popp, “Systematic mistuning of bladed disk assemblies with friction contacts,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2004, vol. 6, no. GT2004-53310, pp. 257–267.
LibreCat
 
[34]
2004 | Journal Article | LibreCat-ID: 9520
M. Lindner, W. Sextro, and K. Popp, “Hysteretic Friction of a Sliding Rubber Element,” PAMM, vol. 4, no. 1, pp. 101–102, 2004.
LibreCat | DOI
 
[33]
2004 | Conference Paper | LibreCat-ID: 9523
L. Panning, K. Popp, W. Sextro, and F. Götting, “Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2004, vol. 6, no. GT2004-53316, pp. 269–280.
LibreCat | DOI
 
[32]
2003 | Conference Paper | LibreCat-ID: 8933
F. Götting, W. Sextro, L. Panning, and K. Popp, “Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen,” in Schwingungen in rotierenden Maschinen VI SIRM, Referate der Tagung in Darmstadt, 2003, pp. 201–210.
LibreCat
 
[31]
2003 | Journal Article | LibreCat-ID: 8934
A. Genzo, W. Sextro, and K. Popp, “Erzwungene Schwingungen von elastischen Mehrkörpersystemen mit Reibkontakten,” PAMM, vol. 2, no. 1, pp. 120–121, 2003.
LibreCat | DOI
 
[30]
2003 | Journal Article | LibreCat-ID: 8937
L. Panning, W. Sextro, and K. Popp, “Design of Friction Dampers for Mistuned Bladed Disks,” PAMM, vol. 3, no. 1, pp. 118–119, 2003.
LibreCat | DOI
 
[29]
2003 | Journal Article | LibreCat-ID: 8938
L. Panning, W. Sextro, and K. Popp, “Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers,” International Journal of Rotating Machinery, vol. 9, no. 3, pp. 219–228, 2003.
LibreCat
 
[28]
2003 | Journal Article | LibreCat-ID: 8939
K. Popp, L. Panning, and W. Sextro, “Vibration Damping by Friction Forces -Theory and Applications,” Journal of Vibration and Control, vol. 9, pp. 419–448, 2003.
LibreCat
 
[27]
2003 | Conference Paper | LibreCat-ID: 8940
W. Sextro and K. Popp, “Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen am Beispiel von Turbomaschinenschaufeln,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW), 2003, no. 753, p. 40.
LibreCat
 
[26]
2003 | Conference Paper | LibreCat-ID: 8941
J. Szwedowicz, W. Sextro, R. Visser, and P. . Masserey, “On forced vibration of shrouded turbine blades,” in ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference, 2003, no. GT2003-38808.
LibreCat | DOI
 
[25]
2002 | Conference Paper | LibreCat-ID: 8928
L. Panning, W. Sextro, and K. Popp, “Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with respect to Friction Damping,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2002, no. GT-2002-30429.
LibreCat
 
[24]
2002 | Conference Paper | LibreCat-ID: 8929
L. Panning, W. Sextro, and K. Popp, “Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers,” in Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC, 2002.
LibreCat
 
[23]
2002 | Conference Paper | LibreCat-ID: 8931
W. Sextro, L. Panning, and F. Götting, “Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2002, no. GT-2002-30427.
LibreCat
 
[22]
2002 | Conference Paper | LibreCat-ID: 8932
W. Sextro and K. Popp, “Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW) - lnformationstagung Turbinen, 2002, no. 518, pp. 157–183.
LibreCat
 
[21]
2001 | Conference Paper | LibreCat-ID: 8921
L. Panning, W. Sextro, and K. Popp, “Schwingungsanalyse verstimmter Schaufelkränze mit Reibelementen,” in Schwingungen in rotierenden Maschinen VI SIRM, Referate der Tagung in Wien, 2001, pp. 297–306.
LibreCat
 
[20]
2001 | Journal Article | LibreCat-ID: 8922
W. Sextro, “Heat and Wear Generation for Rolling Contacts,” Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), vol. 81, pp. 225–226, 2001.
LibreCat
 
[19]
2001 | Conference Paper | LibreCat-ID: 8923
W. Sextro, “Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction,” in ASME Design Engineering Technical Conferences, 2001, no. DETC2001/VIB-21512, pp. 1–12.
LibreCat
 
[18]
2001 | Journal Article | LibreCat-ID: 8924
W. Sextro, K. Popp, and T. Krzyzynski, “Localization in Nonlinear Mistuned Systems with Cyclic Symmetry,” Nonlinear Dynamics, vol. 25, no. 1–3, pp. 207–220, 2001.
LibreCat | DOI
 
[17]
2000 | Journal Article | LibreCat-ID: 8918
T. Krzyzynski, K. Popp, and W. Sextro, “On some regularities in dynamic response of cyclic periodic structures,” Chaos, Solitons \& Fractals, vol. 11, no. 10, pp. 1597–1609, 2000.
LibreCat | DOI
 
[16]
2000 | Conference Paper | LibreCat-ID: 8919
L. Panning, W. Sextro, and K. Popp, “Optimization of Interblade Friction Damper,” in International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 2000, pp. 1–8.
LibreCat
 
[15]
2000 | Conference Paper | LibreCat-ID: 8920
W. Sextro, “The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification,” in International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 2000, pp. 1–8.
LibreCat
 
[14]
1999 | Conference Paper | LibreCat-ID: 8909
K. Popp and W. Sextro, “Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW) -lnformationstagung Turbinen, 1999, no. 504, pp. 21–38.
LibreCat
 
[13]
1999 | Conference Paper | LibreCat-ID: 8910
W. Sextro, “Experimental verification of a non-Hertzian contact model,” in International conference on computational methods in contact mechanics, 1999, pp. 181–190.
LibreCat
 
[12]
1999 | Conference Paper | LibreCat-ID: 8911
W. Sextro, “Forced Vibration of Elastic Structures with Friction Contacts,” in ASME Design Engineering Technical Conferences, 1999, no. DETC99/VIB-8180, pp. 1–10.
LibreCat
 
[11]
1999 | Journal Article | LibreCat-ID: 8912
W. Sextro and K. Popp, “Ein ebenes Reibkontaktmodell zur Berechnung von Schaufelschwingungen mit Reibelementen,” Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), vol. 79, pp. 311–312, 1999.
LibreCat
 
[10]
1999 | Conference Paper | LibreCat-ID: 8913
W. Sextro and K. Popp, “Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW), 1999, no. 686, p. 56.
LibreCat
 
[9]
1998 | Conference Paper | LibreCat-ID: 8907
W. Sextro, K. Popp, and I. Wolter, “Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers,” in International Congress on Combustion Engines, Proceedings of the 22nd CIMAC, 1998, vol. 1, pp. 257–270.
LibreCat
 
[8]
1998 | Conference Paper | LibreCat-ID: 8908
W. Sextro, K. Popp, and I. Wolter, “Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers,” in The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7, 1998, vol. B, pp. 621–630.
LibreCat
 
[7]
1997 | Conference Paper | LibreCat-ID: 8902
K. Popp and W. Sextro, “Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW) -lnformationstagung Turbinen, 1997, no. 496, pp. 131–142.
LibreCat
 
[6]
1997 | Conference Paper | LibreCat-ID: 8903
W. Sextro, “Schwingungsverhalten von Schaufelkränzen mit Reibelementen bei Frequenzverstimmung,” in VDI-Reihe, 1997, vol. 11, no. 245.
LibreCat
 
[5]
1997 | Conference Paper | LibreCat-ID: 8904
W. Sextro, K. Popp, and I. Wolter, “Improved reliability of bladed disks due to friction dampers,” in The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition, 1997.
LibreCat
 
[4]
1996 | Conference Paper | LibreCat-ID: 8896
K. Popp and W. Sextro, “Schwingungsverhalten eines Schaufelkranzes mit Reibelementen bei Frequenzverstimmung,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW) - lnformationstagung Turbinen, 1996, no. 490, pp. 53–76.
LibreCat
 
[3]
1996 | Conference Paper | LibreCat-ID: 8897
K. Popp and W. Sextro, “Dynamical Behaviour of a Bladed Disk with Friction Dampers,” in The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH, 1996, vol. 1, no. 518, pp. 157–183.
LibreCat
 
[2]
1993 | Journal Article | LibreCat-ID: 8895
W. Sextro and B. Schmalhorst, “Static Behaviour of Drill Strings in Curved Boreholes,” Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), vol. 73, pp. 255–257, 1993.
LibreCat
 
[1]
1991 | Book Chapter | LibreCat-ID: 8894
P. Stelter and W. Sextro, “Bifurcations in Dynamic Systems with Dry Friction,” in Bifurcation and Chaos: Analysis, Algorithms, Applications, vol. 97, R. Seydel, F. W. Schneider, T. Küpper, and H. Troger, Eds. Birkhäuser Basel, 1991, pp. 343–347.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed

198 Publications

Mark all

[198]
2024 | Journal Article | LibreCat-ID: 51518
O. K. Aimiyekagbon, A. Bender, T. Hemsel, and W. Sextro, “Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions,” Electronics, vol. 13, no. 3, Art. no. 521, 2024, doi: 10.3390/electronics13030521.
LibreCat | DOI
 
[197]
2023 | Conference Paper | LibreCat-ID: 46813 | OA
M. C. Wohlleben, L. Muth, S. Peitz, and W. Sextro, “Transferability of a discrepancy model for the dynamics of electromagnetic oscillating circuits,” 2023, doi: 10.1002/pamm.202300039.
LibreCat | DOI | Download (ext.)
 
[196]
2023 | Conference Paper | LibreCat-ID: 47116 | OA
O. K. Aimiyekagbon, A. Löwen, A. Bender, L. Muth, and W. Sextro, “Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System,” in Proceedings of the Asia Pacific Conference of the PHM Society 2023 , 2023, vol. 4, no. 1, doi: 10.36001/phmap.2023.v4i1.3596.
LibreCat | DOI | Download (ext.)
 
[195]
2023 | Conference Abstract | LibreCat-ID: 51117
C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” presented at the 7th International Conference on Advanced Electromaterials (ICAE 2023), Jeju, Korea, 2023.
LibreCat
 
[194]
2023 | Conference Abstract | LibreCat-ID: 51118
C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” presented at the International Conference on Functional Materials & Devices 2023 (ICFMD 2023), Incheon, Korea, 2023.
LibreCat
 
[193]
2023 | Conference Abstract | LibreCat-ID: 51119
C. Scheidemann, O. E. C. Hagedorn, T. Hemsel, and W. Sextro, “Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process,” presented at the International Conference on Functional Materials & Devices 2023 (ICFMD 2023), Jeju, Korea, 2023.
LibreCat
 
[192]
2023 | Book Chapter | LibreCat-ID: 51338
J. Schütte and W. Sextro, “Einfluss der Radhubkinematik auf den Reifenverschleiß,” in 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, vol. 2425, VDI Verlag GmbH, 2023, pp. 165–180.
LibreCat
 
[191]
2022 | Conference Paper | LibreCat-ID: 29934
L. Muth, C. Noll, and W. Sextro, “Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data,” in Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021, Saint Petersburg, Russia, 2022, doi: 10.1007/978-3-031-07305-2_92.
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Book Chapter | LibreCat-ID: 29727
M. C. Wohlleben, A. Bender, S. Peitz, and W. Sextro, “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction,” in Machine Learning, Optimization, and Data Science, Cham: Springer International Publishing, 2022.
LibreCat | DOI | Download (ext.)
 
[189]
2022 | Conference Paper | LibreCat-ID: 30371
O. E. C. Hagedorn, M. Broll, O. Kirsch, T. Hemsel, and W. Sextro, “Experimental Investigation of the Influence of different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding,” in CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, Berlin, 2022, pp. 138–143.
LibreCat
 
[188]
2022 | Newspaper Article | LibreCat-ID: 47159
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “On the applicability of time series features as health indicators for technical systems operating under varying conditions,” Condition Monitor, no. 425, pp. 5–10, 2022.
LibreCat
 
[187]
2022 | Conference Paper | LibreCat-ID: 34104
C. Scheidemann, O. Kirsch, T. Hemsel, and W. Sextro, “Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding,” 2022, doi: 10.1109/estc55720.2022.9939478.
LibreCat | DOI
 
[186]
2022 | Patent | LibreCat-ID: 9980
K. Reinke, A. Bender, T. Meyer, W. Sextro, and J. K. Kimotho, “Patent DE 10 2017 000 926 B4: Gerät mit wenigstens einem elastisch verformbaren Bauteil, insbesondere einem Gummi-Metall-Lager und mit einer Einrichtung zur Feststellung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer, sowie Verfahren zur Bestimmung der Bauteil-Restnutzungsdauer.” 2022.
LibreCat | Files available
 
[185]
2022 | Report | LibreCat-ID: 52045
C. Scheidemann, T. Hemsel, and W. Sextro, Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022.
LibreCat | Files available | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 27652
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten ,” in VDI-Berichte 2391, Würzburg, 2021, pp. 197–210.
LibreCat
 
[183]
2021 | Journal Article | LibreCat-ID: 21436
R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,” Microelectronics Reliability, vol. 119, p. 114077, 2021, doi: https://doi.org/10.1016/j.microrel.2021.114077.
LibreCat | DOI
 
[182]
2021 | Conference Paper | LibreCat-ID: 22724 | OA
A. Bender and W. Sextro, “Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties,” in Proceedings of the European Conference of the PHM Society 2021, 2021, vol. 6, no. 1, doi: https://doi.org/10.36001/phme.2021.v6i1.2843 .
LibreCat | DOI | Download (ext.)
 
[181]
2021 | Conference Paper | LibreCat-ID: 22507 | OA
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “On the applicability of time series features as health indicators for technical systems operating under varying conditions,” presented at the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat | Files available
 
[180]
2021 | Conference Paper | LibreCat-ID: 27111 | OA
O. K. Aimiyekagbon, L. Muth, M. C. Wohlleben, A. Bender, and W. Sextro, “Rule-based Diagnostics of a Production Line,” in Proceedings of the European Conference of the PHM Society 2021, 2021, vol. 6, no. 1, pp. 527–536, doi: 10.36001/phme.2021.v6i1.3042.
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 27508 | OA
J. Schütte and W. Sextro, “Tire Wear Reduction Based on an Extended Multibody Rear Axle Model,” Vehicles, pp. 233–256, 2021, doi: 10.3390/vehicles3020015.
LibreCat | DOI | Download (ext.)
 
[178]
2021 | Journal Article | LibreCat-ID: 29293 | OA
S. Martin, J. Schütte, C. Bäumler, W. Sextro, and T. Tröster, “Identification of joints for a load-adapted shape in a body in white using steady state vehicle simulations,” Forces in Mechanics, vol. 6, Art. no. 100065, 2021, doi: 10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[177]
2020 | Conference Paper | LibreCat-ID: 17355
R. Schemmel, C. Scheidemann, T. Hemsel, O. Kirsch, and W. Sextro, “Experimental analysis and modelling of bond formation in ultrasonic heavy wire bonding,” in CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 2020, pp. 1–6.
LibreCat
 
[176]
2020 | Book | LibreCat-ID: 9857
K. Magnus, K. Popp, and W. Sextro, Schwingungen. Springer Vieweg Wiesbaden, 2020.
LibreCat | DOI
 
[175]
2020 | Conference Paper | LibreCat-ID: 17706
R. Schemmel, V. Krieger, T. Hemsel, and W. Sextro, “Co-simulation of MATLAB and ANSYS for ultrasonic wire bonding process optimization,” 2020, doi: 10.1109/eurosime48426.2020.9152679.
LibreCat | DOI
 
[174]
2020 | Conference Paper | LibreCat-ID: 17810
O. K. Aimiyekagbon, A. Bender, and W. Sextro, “Evaluation of time series forecasting approaches for the reliable crack length prediction of riveted aluminium plates given insufficient data,” in PHM Society European Conference, 2020, vol. 5, no. 1.
LibreCat
 
[173]
2020 | Book Chapter | LibreCat-ID: 22007
J. Schütte and W. Sextro, “Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear,” in Lecture Notes in Mechanical Engineering, Cham, 2020.
LibreCat | DOI
 
[172]
2020 | Patent | LibreCat-ID: 9981
K. Reinke, A. Bender, T. Meyer, W. Sextro, and J. K. Kimotho, “Patent EP 3 358 332 B1: Verfahren zur Bestimmung des Beginns einer verschleißbedingten Bauteil-Restnutzungsdauer eines elastisch verformbaren Bauteils, als Strukturteil und/oder Lagerteil eines Geräts.” 2020.
LibreCat | Files available
 
[171]
2019 | Conference Paper | LibreCat-ID: 23716
T. Kaul, J. Hentze, W. Sextro, and I. Gräßler, “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung,” in Fachtagung Mechatronik 2019 Paderborn, 2019, pp. 19–24.
LibreCat
 
[170]
2019 | Conference Paper | LibreCat-ID: 15475
J. Schütte, W. Sextro, and S. Kohl, “Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen,” in Fachtagung Mechatronik 2019, Paderborn, 2019.
LibreCat | DOI
 
[169]
2019 | Conference Paper | LibreCat-ID: 14852
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, and W. Sextro, “Atomization of Fluids with Ultrasound,” in Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019), Enschede, The Netherlands, 2019, pp. 140–143.
LibreCat | Files available
 
[168]
2019 | Conference Paper | LibreCat-ID: 15244
O. E. C. Hagedorn, D. Pielsticker, T. Hemsel, and W. Sextro, “Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen,” in 2. VDI-Fachtagung Schwingungen 2019, 2019.
LibreCat
 
[167]
2019 | Book | LibreCat-ID: 10002
W. Sextro and M. Brökelmann, Intelligente Herstellung zuverlässiger Kupferbondverbindungen, vol. VIII. Springer Verlag, 2019.
LibreCat | DOI
 
[166]
2019 | Conference Paper | LibreCat-ID: 10255
A. Bender, K. Reinke, and W. Sextro, “Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement,” in 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, 2019, vol. VDI-Berichte 2346, pp. 241–248.
LibreCat
 
[165]
2019 | Conference Paper | LibreCat-ID: 10257
T. Kaul, J. Hentze, W. Sextro, and I. Gräßler, “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung,” in Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
 
[164]
2019 | Conference Paper | LibreCat-ID: 10258
P. Dunst, T. Hemsel, P. Bornmann, W. Littmann, and W. Sextro, “Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung hochviskoser Flüssigkeiten,” in DAGA 2019, Rostock, 2019.
LibreCat
 
[163]
2019 | Journal Article | LibreCat-ID: 10334
R. Schemmel, T. Hemsel, C. Dymel, M. Hunstig, M. Brökelmann, and W. Sextro, “Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding,” Sensors and Actuators A: Physical, vol. 295, pp. 653–662, 2019, doi: 10.1016/j.sna.2019.04.025.
LibreCat | DOI
 
[162]
2019 | Conference Paper | LibreCat-ID: 13460 | OA
A. Bender, L. Schinke, and W. Sextro, “Remaining useful lifetime prediction based on adaptive failure thresholds,” in Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), Hannover, 2019, no. 29, pp. 1262–1269.
LibreCat | Download (ext.)
 
[161]
2019 | Conference Paper | LibreCat-ID: 13461 | OA
T. Kaul, A. Bender, and W. Sextro, “Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems,” in Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), Hannover, 2019, no. 29, pp. 2340–2347.
LibreCat | Download (ext.)
 
[160]
2018 | Conference Paper | LibreCat-ID: 9987
A. Bender and W. Sextro, “A particle filtering approach for temperature based prognostics,” in Safety and Reliability – Safe Societies in a Changing World, 2018, pp. 1025–1033.
LibreCat
 
[159]
2018 | Journal Article | LibreCat-ID: 9990
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, and W. Sextro, “Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders,” ACTUATOR 2018; 16th International Conference on New Actuators, pp. 142–145, 2018.
LibreCat
 
[158]
2018 | Journal Article | LibreCat-ID: 9991
P. Dunst, P. Bornmann, T. Hemsel, and W. Sextro, “Vibration-Assisted Handling of Dry Fine Powders,” Actuators 2018, 7(2)., pp. 1–11, 2018.
LibreCat | DOI
 
[157]
2018 | Conference Paper | LibreCat-ID: 9992
C. Dymel et al., “Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process,” in (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1–6.
LibreCat
 
[156]
2018 | Conference Paper | LibreCat-ID: 9993
C. Dymel, R. Schemmel, T. Hemsel, W. Sextro, M. Brökelmann, and M. Hunstig, “Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding,” in (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.
LibreCat
 
[155]
2018 | Book | LibreCat-ID: 9995
T. Meyer, T. Kaul, J. K. Kimotho, and W. Sextro, Steigerung der Intelligenz mechatronischer Systeme, vol. Steigerung der Verlässlichkeit technischer Systeme. Springer Nature Switzerland AG. Part of Springer Nature., 2018, pp. 193–213.
LibreCat
 
[154]
2018 | Conference Paper | LibreCat-ID: 9997
R. Schemmel, S. Althoff, W. Sextro, A. Unger, M. Brökelmann, and M. Hunstig, “Effects of different working frequencies on the joint formation in copper wire bonding,” in CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018), 2018, pp. 230–235.
LibreCat
 
[153]
2018 | Conference Paper | LibreCat-ID: 9998
R. Schemmel, T. Hemsel, and W. Sextro, “Numerical and experimental investigations in ultrasonic heavy wire bonding,” in 6th European Conference on Computational Mechanics (ECCM 6), 2018, pp. 1–12.
LibreCat
 
[152]
2018 | Conference Paper | LibreCat-ID: 9999
A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, and W. Sextro, “Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges,” in In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018, vol. Vol. 2018, No. 1, pp. 000572-000577.
LibreCat | DOI
 
[151]
2017 | Conference Paper | LibreCat-ID: 23560
J. Hentze, T. Kaul, I. Gräßler, and W. Sextro, “Integrated modeling of behavior and reliability in system development,” in ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB, Vancouver, Kanada, 21. - 25. Aug. 2017, 2017, pp. 385–394.
LibreCat
 
[150]
2017 | Conference Paper | LibreCat-ID: 9969
A. Bender, T. Kaul, and W. Sextro, “Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente,” in Verlagsschriftenreihe des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, 2017, pp. 347–358.
LibreCat
 
[149]
2017 | Conference Paper | LibreCat-ID: 9970
A. Bender, J. K. Kimotho, S. Kohl, W. Sextro, and K. Reinke, “Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen,” in 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123–125.
LibreCat
 
[148]
2017 | Conference Paper | LibreCat-ID: 9971
A. Bender, W. Sextro, and K. Reinke, “Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen,” in VDI-Berichte 2301, 2017, pp. 49–60.
LibreCat
 
[147]
2017 | Journal Article | LibreCat-ID: 9972
P. Dunst, T. Hemsel, and W. Sextro, “Analysis of pipe vibration in an ultrasonic powder transportationsystem,” elsevier, vol. Sensors and Actuators A 263, pp. 733–736, 2017.
LibreCat
 
[146]
2017 | Journal Article | LibreCat-ID: 9973
P. Eichwald et al., “Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design,” IMAPSource, vol. Vol. 2017, No. 1, 2017.
LibreCat
 
[145]
2017 | Conference Paper | LibreCat-ID: 9974
J. Hentze, T. Kaul, I. Grässler, and W. Sextro, “Integrated modeling og behavior and reliability in system development,” in ICED17, 21st International conference on enginieering design, 2017, pp. 385–394.
LibreCat
 
[144]
2017 | Journal Article | LibreCat-ID: 9976
T. Kaul, T. Meyer, and W. Sextro, “Formulation of reliability-related objective functions for design of intelligent mechatronic systems,” SAGE Journals, vol. Vol. 231(4), pp. 390–399, 2017.
LibreCat | DOI
 
[143]
2017 | Conference Paper | LibreCat-ID: 9978
J. K. Kimotho, W. Sextro, and T. Hemsel, “Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing,” in IEEE Transactions on Reliability, 2017, pp. 1–10.
LibreCat | DOI
 
[142]
2017 | Conference Paper | LibreCat-ID: 9982
R. Schemmel, T. Hemsel, and W. Sextro, “MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall,” in 43. Deutsche Jahrestagung für Akustik, 2017, pp. 611–614.
LibreCat
 
[141]
2017 | Conference Paper | LibreCat-ID: 9983
S. Schulze, W. Sextro, and K. Kister, “Model based optimization of dynamics in adaptive headlamps,” in Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
 
[140]
2017 | Conference Paper | LibreCat-ID: 9985
W. Sextro, T. Meyer, T. Kaul, and J. K. Kimotho, “Entwicklung verlässlicher, intelligenter Systeme,” in VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung und Betrieb zuverlässiger Produkte., 2017, pp. 17–30.
LibreCat
 
[139]
2016 | Conference Paper | LibreCat-ID: 9955
S. Althoff, T. Meyer, A. Unger, W. Sextro, and F. Eacock, “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools,” in IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110.
LibreCat | DOI
 
[138]
2016 | Journal Article | LibreCat-ID: 9957
M. Brökelmann et al., “Kupferbondverbindungen intelligent herstellen,” wt-online, vol. 7/8, pp. 512–519, 2016.
LibreCat
 
[137]
2016 | Conference Paper | LibreCat-ID: 9958
P. Dunst, W. Sextro, P. Bornmann, T. Hemsel, and W. Littmann, “Transportation of dry fine powders by coordinated friction manipulation,” in PAMM Proc. Appl. Math. Mech. 16, 2016, pp. 635–636.
LibreCat | DOI
 
[136]
2016 | Conference Paper | LibreCat-ID: 9960
P. Eichwald et al., “Micro Wear Modeling in Copper Wire Wedge Bonding,” in IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
 
[135]
2016 | Conference Paper | LibreCat-ID: 9961
T. Kaul, T. Meyer, and W. Sextro, “Modeling of Complex Redundancy in Technical Systems with Bayesian Networks,” in Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
 
[134]
2016 | Conference Paper | LibreCat-ID: 9963
S. Kohl, W. Sextro, and S. Schulze, “Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS,” in The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 2016, pp. 1–12.
LibreCat
 
[133]
2016 | Conference Paper | LibreCat-ID: 9964
C. Lessmeier, J. K. Kimotho, D. Zimmer, and W. Sextro, “Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification,” in European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
 
[132]
2016 | Conference Paper | LibreCat-ID: 9966
T. Meyer et al., “Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation,” in IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622–628.
LibreCat | DOI
 
[131]
2016 | Conference Paper | LibreCat-ID: 9967
S. Schulze, W. Sextro, and S. Kohl, “Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems,” in 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1–11.
LibreCat
 
[130]
2016 | Conference Paper | LibreCat-ID: 9968
A. Unger et al., “Validated Simulation of the Ultrasonic Wire Bonding Process,” in Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 2016, pp. 251–254.
LibreCat
 
[129]
2015 | Conference Paper | LibreCat-ID: 9943
S. Althoff, A. Unger, W. Sextro, and F. Eacock, “Improving the cleaning process in copper wire bonding by adapting bonding parameters,” in 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6.
LibreCat | DOI
 
[128]
2015 | Journal Article | LibreCat-ID: 9944
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, and B. Zeqiri, “Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler,” tm - Technisches Messen, vol. 82, no. 2, pp. 73–84, 2015.
LibreCat | DOI
 
[127]
2015 | Conference Paper | LibreCat-ID: 9945
T. Kaul, T. Meyer, and W. Sextro, “Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme,” in 10. Paderborner Workshop Entwurf mechatronischer Systeme, 2015, pp. 101–112.
LibreCat
 
[126]
2015 | Conference Paper | LibreCat-ID: 9946
T. Kaul, T. Meyer, and W. Sextro, “Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems,” in European Safety and Reliability Conference (ESREL2015), 2015.
LibreCat | DOI
 
[125]
2015 | Conference Paper | LibreCat-ID: 9947
J. K. Kimotho and W. Sextro, “Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics,” in Annual Conference of the Prognostics and Health Management Society 2015, 2015, vol. 6.
LibreCat
 
[124]
2015 | Conference Paper | LibreCat-ID: 9949
T. Meyer, T. Kaul, and W. Sextro, “Advantages of reliability-adaptive system operation for maintenance planning,” in Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 2015, pp. 940–945.
LibreCat | DOI
 
[123]
2015 | Conference Paper | LibreCat-ID: 9950
T. Meyer, J. K. Kimotho, and W. Sextro, “Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme,” in 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung und Betrieb zuverlässiger Produkte, 2015, no. 2260, pp. 111–122.
LibreCat
 
[122]
2015 | Conference Paper | LibreCat-ID: 9951
T. Meyer et al., “Modeling and simulation of the ultrasonic wire bonding process,” in 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat | DOI
 
[121]
2015 | Conference Paper | LibreCat-ID: 9952
F. Schulte, J. Neuhaus, and W. Sextro, “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties,” in Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–1117.
LibreCat
 
[120]
2015 | Conference Paper | LibreCat-ID: 9954
A. Unger et al., “Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear,” in 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat | DOI
 
[119]
2014 | Book | LibreCat-ID: 25168
J. Gausemeier, F.-J. Rammig, W. Schäfer, and W. Sextro, Dependability of Self-Optimizing Mechatronic Systems. Heidelberg, Germany: Springer-Verlag, 2014.
LibreCat
 
[118]
2014 | Book Chapter | LibreCat-ID: 25173
M. Dellnitz et al., “Self-optimizing Mechatronic Systems,” in Dependability of Self-optimizing Mechatronic Systems, Kapitel: 1.1, Heidelberg, Germany: Springer-Verlag, 2014, pp. 3–12.
LibreCat
 
[117]
2014 | Book Chapter | LibreCat-ID: 28394
R. Dorociak, J. Gausemeier, P. Iwanek, T. Meyer, W. Sextro, and C. Sondermann-W{\"o}lke, “Development of the Active Guidance Module,” in Dependability of Self-optimizing Mechatronic Systems, AACE Press, 2014, pp. 178–182.
LibreCat
 
[116]
2014 | Book | LibreCat-ID: 28396
J. Gausemeier, F.-J. Rammig, Wilhelm Sch{\"a}fer, and W. Sextro, Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany, 2014.
LibreCat
 
[115]
2014 | Book Chapter | LibreCat-ID: 28399
R. Dorociak, J{\"u}rgen Gausemeier, Peter Iwanek, T. Meyer, and W. Sextro, “Selecting Suitable Methods Using the Methodology,” in Dependability of Self-optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–178.
LibreCat
 
[114]
2014 | Book Chapter | LibreCat-ID: 28400
R. Dorociak, J. Gausemeier, P. Iwanek, T. Meyer, and W. Sextro, “Selecting Suitable Methods Using the Methodology,” in Dependability of Self-optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–178.
LibreCat
 
[113]
2014 | Book Chapter | LibreCat-ID: 28410
P. Iwanek, T. Meyer, C. Priesterjahn, W. Sextro, and M. Va{\ss}holz, “Challenges,” in Dependability of Self-optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2014, pp. 12–15.
LibreCat
 
[112]
2014 | Conference Paper | LibreCat-ID: 9868
S. Althoff, J. Neuhaus, T. Hemsel, and W. Sextro, “Improving the bond quality of copper wire bonds using a friction model approach,” in Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–1555.
LibreCat | DOI
 
[111]
2014 | Conference Paper | LibreCat-ID: 9869
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, and B. Zeqiri, “Self-Sensing Ultrasound Transducer for Cavitation Detection,” in 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663–666.
LibreCat | DOI
 
[110]
2014 | Conference Paper | LibreCat-ID: 9871
P. Eichwald et al., “Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding,” in Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856–861.
LibreCat | DOI
 
[109]
2014 | Book | LibreCat-ID: 9873
J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Dependability of Self-Optimizing Mechatronic Systems, vol. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014.
LibreCat
 
[108]
2014 | Journal Article | LibreCat-ID: 9874
T. Hemsel, P. Bornmann, T. Morita, C. Sondermann-Wölke, and W. Sextro, “Reliability analysis of ultrasonic power transducers,” Archive of Applied Mechanics, pp. 1–7, 2014.
LibreCat | DOI
 
[107]
2014 | Journal Article | LibreCat-ID: 9876
M. Hunstig, T. Hemsel, and W. Sextro, “High-velocity operation of piezoelectric inertia motors: experimental validation,” Archive of Applied Mechanics, pp. 1–9, 2014.
LibreCat | DOI
 
[106]
2014 | Conference Paper | LibreCat-ID: 9879
J. K. Kimotho, T. Meyer, and W. Sextro, “PEM fuel cell prognostics using particle filter with model parameter adaptation,” in Prognostics and Health Management (PHM), 2014 IEEE Conference on, 2014, pp. 1–6.
LibreCat | DOI
 
[105]
2014 | Conference Paper | LibreCat-ID: 9880
J. K. Kimotho and W. Sextro, “An approach for feature extraction and selection from non-trending data for machinery prognosis,” in Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, 2014, vol. 5.
LibreCat
 
[104]
2014 | Journal Article | LibreCat-ID: 9881
J. K. Kimotho and W. Sextro, “Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation,” PAMM, vol. 14, no. 1, pp. 815–816, 2014.
LibreCat | DOI
 
[103]
2014 | Journal Article | LibreCat-ID: 9882
S. Kohl, W. Sextro, and A. Zuber, “Tire footprint analysis depending on the elastokinematics of a multi-link suspension system using multi-body dynamics simulation,” PAMM, vol. 14, no. 1, pp. 65–66, 2014.
LibreCat | DOI
 
[102]
2014 | Book Chapter | LibreCat-ID: 9883
T. Meyer, C. Priesterjahn, and W. Sextro, “Conclusion and Outlook,” in Dependability of Self-Optimizing Mechatronic Systems, J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Eds. Springer Berlin Heidelberg, 2014, pp. 189–190.
LibreCat | DOI
 
[101]
2014 | Journal Article | LibreCat-ID: 9885
T. Meyer , C. Sondermann-Wölke, and W. Sextro, “Method to Identify Dependability Objectives in Multiobjective Optimization Problem,” Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence, vol. 15, pp. 46–53, 2014.
LibreCat | DOI
 
[100]
2014 | Conference Paper | LibreCat-ID: 9887
J. Neuhaus and W. Sextro, “Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements,” in Proceedings of the 5th International Conference on Computational Methods, 2014.
LibreCat
 
[99]
2014 | Journal Article | LibreCat-ID: 9888
S. Schulze, W. Sextro, and F. Grüter, “Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications,” PAMM, vol. 14, no. 1, pp. 39–40, 2014.
LibreCat | DOI
 
[98]
2014 | Conference Paper | LibreCat-ID: 9889
C. Sprock and W. Sextro, “Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending,” in Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 2014, pp. 320–324.
LibreCat | DOI
 
[97]
2014 | Conference Paper | LibreCat-ID: 9890
C. Sprock and W. Sextro, “Time-efficient analysis of nonlinear dynamic behavior.,” in Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, 2014, pp. 293–294.
LibreCat
 
[96]
2014 | Conference Paper | LibreCat-ID: 9891
C. Sprock and W. Sextro, “Time-efficient analysis of nonlinear peak bending behavior.,” in Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 2014, pp. 1–8.
LibreCat
 
[95]
2014 | Conference Paper | LibreCat-ID: 9892
C. Sprock and W. Sextro, “Vibration Analysis of Mechanical Structures using Multisine Excitation Techniques,” in Proceedings of 31st Danubia-Adria Symposium. 2014, 2014.
LibreCat
 
[94]
2014 | Book Chapter | LibreCat-ID: 9893
A. Trächtler et al., “Introduction to Self-optimization and Dependability,” in Dependability of Self-Optimizing Mechatronic Systems, J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Eds. Springer Berlin Heidelberg, 2014, pp. 1–24.
LibreCat | DOI
 
[93]
2014 | Book Chapter | LibreCat-ID: 9894
A. Trächtler et al., “Case Study,” in Dependability of Self-Optimizing Mechatronic Systems, J. Gausemeier, F. Josef Rammig, W. Schäfer, and W. Sextro, Eds. Springer Berlin Heidelberg, 2014, pp. 173–188.
LibreCat | DOI
 
[92]
2014 | Conference Paper | LibreCat-ID: 9895
A. Unger et al., “Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds,” in Proceedings of the 47th International Symposium on Microelectronics (IMAPS), 2014, pp. 289–294.
LibreCat
 
[91]
2014 | Conference Paper | LibreCat-ID: 9896
A. Unger et al., “Data-driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding,” in Proceedings of 8th International Conference on Integrated Power Electronic Systems, 2014, vol. 141, pp. 175–180.
LibreCat
 
[90]
2013 | Conference Paper | LibreCat-ID: 26973
T. Meyer, J. H. Kessler, W. Sextro, and A. Trächtler, “Increasing Intelligent Systems’ Reliability by using Reconfiguration,” 2013.
LibreCat
 
[89]
2013 | Book Chapter | LibreCat-ID: 23139
J. H. Kessler, T. Meyer, W. Sextro, C. Sondermann-Wölke, and A. Trächtler, “Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept,” in Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 55–62.
LibreCat
 
[88]
2013 | Conference Paper | LibreCat-ID: 23140
T. Meyer, J. H. Kessler, W. Sextro, and A. Trächtler, “Increasing Intelligent Systems’ Reliability by using Reconfiguration,” in The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
 
[87]
2013 | Book Chapter | LibreCat-ID: 23149
C. Hölscher et al., “Applications of Self-Optimizing Systems,” in Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 16–22.
LibreCat
 
[86]
2013 | Journal Article | LibreCat-ID: 9794
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Increasing the power of piezoelectric energy harvesters by magnetic stiffening,” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, pp. 1332–1342, 2013.
LibreCat | DOI
 
[85]
2013 | Journal Article | LibreCat-ID: 9795
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments,” Sensors and Actuators A: Physical, vol. 200, pp. 138–146, 2013.
LibreCat | DOI
 
[84]
2013 | Conference Paper | LibreCat-ID: 9796
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems,” in Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, 2013, no. 05/2013, pp. 159–161.
LibreCat
 
[83]
2013 | Conference Paper | LibreCat-ID: 9797
S. Althoff, J. Neuhaus, T. Hemsel, and W. Sextro, “A friction based approach for modeling wire bonding,” in IMAPS 2013, 46th International Symposium on Microelectronics, 2013.
LibreCat | DOI
 
[82]
2013 | Conference Paper | LibreCat-ID: 9799
P. Eichwald et al., “Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding,” in 15th Electronics Packaging Technology Conference, 2013.
LibreCat | DOI
 
[81]
2013 | Conference Paper | LibreCat-ID: 9801
M. Hunstig, W. Al-Ashtari, T. Hemsel, and W. Sextro, “Leistungs- und Bandbreitensteigerung von Energy-Harvesting-Generatoren für Energieautarke Systeme,” in 9. Paderborner Workshop Entwurf mechatronischer Systeme, 2013, pp. 359–372.
LibreCat
 
[80]
2013 | Conference Paper | LibreCat-ID: 9802
M. Hunstig, T. Hemsel, and W. Sextro, “High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation,” in Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, 2013, pp. 16–18.
LibreCat
 
[79]
2013 | Journal Article | LibreCat-ID: 9803
M. Hunstig, T. Hemsel, and W. Sextro, “Modelling the friction contact in an inertia motor,” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, pp. 1380–1391, 2013.
LibreCat | DOI
 
[78]
2013 | Journal Article | LibreCat-ID: 9804
M. Hunstig, T. Hemsel, and W. Sextro, “Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation,” Sensors and Actuators A: Physical, vol. 200, pp. 79–89, 2013.
LibreCat | DOI
 
[77]
2013 | Journal Article | LibreCat-ID: 9805
M. Hunstig, T. Hemsel, and W. Sextro, “Stick-slip and slip-slip operation of piezoelectric inertia drives - Part I: Ideal Excitation.,” Sensors and Actuators A: Physical, vol. 200, pp. 90–100, 2013.
LibreCat | DOI
 
[76]
2013 | Journal Article | LibreCat-ID: 9807
J. K. Kimotho, C. Sondermann-Wölke, T. Meyer, and W. Sextro, “Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization,” Chemical Engineering Transactions, vol. 33, pp. 619–624, 2013.
LibreCat | DOI
 
[75]
2013 | Journal Article | LibreCat-ID: 9808
J. K. Kimotho, C. Sondermann-Wölke, T. Meyer, and W. Sextro, “Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation,” International Journal of Prognostics and Health Management, vol. 4, no. 2, 2013.
LibreCat
 
[74]
2013 | Conference Paper | LibreCat-ID: 9855
S. Kohl, A. Zuber, and W. Sextro, “Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems,” in Proc. Appl. Math. Mech., 2013, vol. 13, pp. 23–24.
LibreCat | DOI
 
[73]
2013 | Conference Paper | LibreCat-ID: 9858
T. Meyer, C. Hölscher, M. Menke, W. Sextro, and D. Zimmer, “Multiobjective Optimization including Safety of Operation Applied to a Linear Drive System,” in Proc. Appl. Math. Mech., 2013, vol. 13, pp. 483–484.
LibreCat | DOI
 
[72]
2013 | Conference Paper | LibreCat-ID: 9859
T. Meyer , J. Henning Keßler, W. Sextro, and A. Trächtler, “Increasing Intelligent Systems’ Reliability by Using Reconfiguration,” in Proceedings of the Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat | DOI
 
[71]
2013 | Journal Article | LibreCat-ID: 9860
T. Meyer, C. Sondermann-Wölke, J. K. Kimotho, and W. Sextro, “Controlling the Remaining Useful Lifetime using Self-Optimization,” Chemical Engineering Transactions, vol. 33, pp. 625–630, 2013.
LibreCat | DOI
 
[70]
2013 | Conference Paper | LibreCat-ID: 9861
T. Meyer, C. Sondermann-Wölke, W. Sextro, M. Riedl, A. Gouberman, and M. Siegle, “Bewertung der Zuverlässigkeit selbstoptimierender Systeme mit dem LARES-Framework,” in 9. Paderborner Workshop Entwurf mechatronischer Systeme, 2013, pp. 161–174.
LibreCat
 
[69]
2012 | Journal Article | LibreCat-ID: 9781
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Frequency tuning of piezoelectric energy harvesters by magnetic force,” Smart Materials and Structures, vol. 21, no. 3, p. 035019, 2012.
LibreCat
 
[68]
2012 | Journal Article | LibreCat-ID: 9782
W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Analytical determination of characteristic frequencies and equivalent circuit parameters of a piezoelectric bimorph,” Journal of Intelligent Material Systems and Structures, vol. 23, no. 1, pp. 15–23, 2012.
LibreCat | DOI
 
[67]
2012 | Conference Paper | LibreCat-ID: 9783
P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, and T. Morita, “Non-perturbing cavitation detection / monitoring in sonochemical reactors,” in Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–1144.
LibreCat | DOI
 
[66]
2012 | Conference Paper | LibreCat-ID: 9787
S. Kohl, W. Sextro, and A. Zuber, “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie,” in 8. Tag des Fahrwerks, Aachen, 2012, 2012, pp. 38–60.
LibreCat
 
[65]
2012 | Conference Paper | LibreCat-ID: 9791
C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, and W. Sextro, “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution,” in Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012), 2012.
LibreCat
 
[64]
2012 | Journal Article | LibreCat-ID: 9806
M. Hunstig, T. Hemsel, and W. Sextro, “Analysis of different operation modes for inertia motors,” ACTUATOR 2012 Conference Proceedings, pp. 761–764, 2012.
LibreCat
 
[63]
2011 | Conference Paper | LibreCat-ID: 26981
C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” 2011.
LibreCat
 
[62]
2011 | Conference Paper | LibreCat-ID: 23184
O. Lurye, C. Sondermann-Wölke, I. Kromov, W. Sextro, and A. Trächtler, “Verlässlichkeitsanalyse des Degradationsverhaltens mechatronischer Systeme mit mehreren Betriebsstrategien,” in VDI Bericht zur Tagung Technische Zuverlässigkeit, 2011.
LibreCat
 
[61]
2011 | Conference Paper | LibreCat-ID: 23194
C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” in Technische Zuverlässigkeit TTZ, 2011.
LibreCat
 
[60]
2011 | Conference Paper | LibreCat-ID: 9768
O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, and W. Sextro, “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies,” in 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte, 2011, pp. 99–110.
LibreCat
 
[59]
2011 | Conference Paper | LibreCat-ID: 9771
C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” in 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte, 2011, pp. 291–302.
LibreCat
 
[58]
2011 | Journal Article | LibreCat-ID: 9772
C. Tomberger, P. Dietmaier, W. Sextro, and K. Six, “Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature,” Wear, vol. 271, pp. 2–12, 2011.
LibreCat | DOI
 
[57]
2011 | Patent | LibreCat-ID: 9790
W. Sextro, M. Hunstig, P. Bornmann, and T. Hemsel, “Patent DE10201003395: Anordnung und Verfahren zur mehrdimensionalen Messung von Schwingungen eines Objekts. .” 2011.
LibreCat
 
[56]
2010 | Journal Article | LibreCat-ID: 9747
J. S. Hölzl and W. Sextro, “Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen,” PAMM, vol. 10, no. 1, pp. 247–248, 2010.
LibreCat | DOI
 
[55]
2010 | Journal Article | LibreCat-ID: 9748
J. S. Hölzl and W. Sextro, “Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces,” SAE International Journal of Passenger Cars- Mechanical Systems, pp. 929–935, 2010.
LibreCat | DOI
 
[54]
2010 | Conference Paper | LibreCat-ID: 9753
M. Hunstig, T. Hemsel, and W. Sextro, “Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren,” in 7. Paderborner Workshop Entwurf mechatronischer Systeme, 2010, vol. 272, pp. 129–141.
LibreCat
 
[53]
2010 | Conference Paper | LibreCat-ID: 9754
M. Hunstig, T. Hemsel, and W. Sextro, “Improving the Performance of Piezoelectric Inertia Motors,” in ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–661.
LibreCat
 
[52]
2010 | Conference Paper | LibreCat-ID: 9760
C. Sondermann-Wölke, T. Hemsel, W. Sextro, J. Gausemeier, and S. Pook, “Guideline for the dependability-oriented design of self-optimizing systems,” in Industrial Informatics (INDIN), 2010 8th IEEE International Conference on, 2010, pp. 739–744.
LibreCat | DOI
 
[51]
2010 | Journal Article | LibreCat-ID: 9761
C. Sondermann-Wölke and W. Sextro, “Integration of Condition Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance Module,” International Journal On Advances in Intelligent Systems, vol. 3, no. 1–3, pp. 65–74, 2010.
LibreCat
 
[50]
2010 | Conference Paper | LibreCat-ID: 9762
C. Sondermann-Wölke, W. Sextro, J. Geisler, and A. Trächtler, “Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls,” in Entwurf mechatronischer Systeme, 2010, vol. 272, pp. 411–420.
LibreCat
 
[49]
2010 | Conference Paper | LibreCat-ID: 9763
C. Sondermann-Wölke, J. Geisler, and W. Sextro, “Increasing the reliability of a self-optimizing railway guidance system,” in Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6.
LibreCat | DOI
 
[48]
2010 | Journal Article | LibreCat-ID: 9764
C. Tomberger, P. Dietmaier, R. Martin, W. Sextro, and K. Six, “Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den Kraftschluss zwischen Rad und Schiene,” ZEVrail, vol. 134, pp. 127–135, 2010.
LibreCat
 
[47]
2009 | Conference Paper | LibreCat-ID: 9742
C. Sondermann-Wölke and W. Sextro, “Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules,” in Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:, 2009, pp. 15–20.
LibreCat | DOI
 
[46]
2007 | Conference Paper | LibreCat-ID: 9560
A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, and J. Neges, “Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe,” in 27. Internationales Mju-Symposium/Bremsen-Fachtagung, 2007, no. 657, pp. 29–49.
LibreCat
 
[45]
2007 | Conference Paper | LibreCat-ID: 9561
A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, and J. Neges, “Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc,” in 27. Internationales Mju-Symposium/Bremsen-Fachtagung, 2007, no. 657, pp. 144–163.
LibreCat
 
[44]
2007 | Conference Paper | LibreCat-ID: 9563
A. Genzo, W. Sextro, and L. Panning, “Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten,” in VDI-Berichte, 2007, vol. 2022, pp. 147–161.
LibreCat
 
[43]
2007 | Journal Article | LibreCat-ID: 9567
J. Szwedowicz, R. Visser, W. Sextro, and P. A. Masserey, “On Nonlinear Forced Vibration of Shrouded Turbine Blades,” Journal of Turbomachinery, vol. 130, no. 1, pp. 011002–011002, 2007.
LibreCat
 
[42]
2006 | Conference Paper | LibreCat-ID: 9535
A. Genzo and W. Sextro, “Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts,” in Proceedings of ISMA - International conference on noise and vibration engineering, 2006, pp. 51–52.
LibreCat
 
[41]
2006 | Book Chapter | LibreCat-ID: 9536
F. Gutzeit, W. Sextro, and M. Kröger, “Unsteady rolling contact of rubber wheels,” in Analysis and Simulation of Contact Problems, vol. 27, P. Wriggers and U. Nackenhorst, Eds. Springer Berlin Heidelberg, 2006, pp. 261–270.
LibreCat | DOI
 
[40]
2006 | Conference Paper | LibreCat-ID: 9542
A. Hofmeisterro, W. Sextro, and O. Röschel, “Error-Workspace Analysis of Plane Mechanisms,” in Proceedings of EUCOMES, the first European Conference on Mechanism Science, 2006, pp. 1–12.
LibreCat
 
[39]
2006 | Book Chapter | LibreCat-ID: 9551
W. Sextro, P. Moldenhauer, M. Wangenheim, M. Lindner, and M. Kröger, “Contact behaviour of a sliding rubber element,” in Analysis and Simulation of Contact Problems, vol. 27, P. Wriggers and U. Nackenhorst, Eds. Springer Berlin Heidelberg, 2006, pp. 243–252.
LibreCat | DOI
 
[38]
2005 | Journal Article | LibreCat-ID: 9266
A. Genzo, W. Sextro, and K. Popp, “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts,” PAMM, vol. 5, no. 1, pp. 91–92, 2005.
LibreCat | DOI
 
[37]
2005 | Journal Article | LibreCat-ID: 9526
A. Genzo, W. Sextro, and K. Popp, “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts,” PAMM, vol. 5, no. 1, pp. 91–92, 2005.
LibreCat | DOI
 
[36]
2005 | Journal Article | LibreCat-ID: 9529
A. Hofmeister, W. Sextro, and O. Röschel, “Unkontrollierbare Bewegungen ebener Mechanismen mit Gelenkspiel,” PAMM, vol. 5, no. 1, pp. 201–202, 2005.
LibreCat | DOI
 
[35]
2004 | Conference Paper | LibreCat-ID: 8952
F. Götting, W. Sextro, L. Panning, and K. Popp, “Systematic mistuning of bladed disk assemblies with friction contacts,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2004, vol. 6, no. GT2004-53310, pp. 257–267.
LibreCat
 
[34]
2004 | Journal Article | LibreCat-ID: 9520
M. Lindner, W. Sextro, and K. Popp, “Hysteretic Friction of a Sliding Rubber Element,” PAMM, vol. 4, no. 1, pp. 101–102, 2004.
LibreCat | DOI
 
[33]
2004 | Conference Paper | LibreCat-ID: 9523
L. Panning, K. Popp, W. Sextro, and F. Götting, “Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2004, vol. 6, no. GT2004-53316, pp. 269–280.
LibreCat | DOI
 
[32]
2003 | Conference Paper | LibreCat-ID: 8933
F. Götting, W. Sextro, L. Panning, and K. Popp, “Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen,” in Schwingungen in rotierenden Maschinen VI SIRM, Referate der Tagung in Darmstadt, 2003, pp. 201–210.
LibreCat
 
[31]
2003 | Journal Article | LibreCat-ID: 8934
A. Genzo, W. Sextro, and K. Popp, “Erzwungene Schwingungen von elastischen Mehrkörpersystemen mit Reibkontakten,” PAMM, vol. 2, no. 1, pp. 120–121, 2003.
LibreCat | DOI
 
[30]
2003 | Journal Article | LibreCat-ID: 8937
L. Panning, W. Sextro, and K. Popp, “Design of Friction Dampers for Mistuned Bladed Disks,” PAMM, vol. 3, no. 1, pp. 118–119, 2003.
LibreCat | DOI
 
[29]
2003 | Journal Article | LibreCat-ID: 8938
L. Panning, W. Sextro, and K. Popp, “Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers,” International Journal of Rotating Machinery, vol. 9, no. 3, pp. 219–228, 2003.
LibreCat
 
[28]
2003 | Journal Article | LibreCat-ID: 8939
K. Popp, L. Panning, and W. Sextro, “Vibration Damping by Friction Forces -Theory and Applications,” Journal of Vibration and Control, vol. 9, pp. 419–448, 2003.
LibreCat
 
[27]
2003 | Conference Paper | LibreCat-ID: 8940
W. Sextro and K. Popp, “Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen am Beispiel von Turbomaschinenschaufeln,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW), 2003, no. 753, p. 40.
LibreCat
 
[26]
2003 | Conference Paper | LibreCat-ID: 8941
J. Szwedowicz, W. Sextro, R. Visser, and P. . Masserey, “On forced vibration of shrouded turbine blades,” in ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference, 2003, no. GT2003-38808.
LibreCat | DOI
 
[25]
2002 | Conference Paper | LibreCat-ID: 8928
L. Panning, W. Sextro, and K. Popp, “Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with respect to Friction Damping,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2002, no. GT-2002-30429.
LibreCat
 
[24]
2002 | Conference Paper | LibreCat-ID: 8929
L. Panning, W. Sextro, and K. Popp, “Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers,” in Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC, 2002.
LibreCat
 
[23]
2002 | Conference Paper | LibreCat-ID: 8931
W. Sextro, L. Panning, and F. Götting, “Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts,” in Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2002, no. GT-2002-30427.
LibreCat
 
[22]
2002 | Conference Paper | LibreCat-ID: 8932
W. Sextro and K. Popp, “Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW) - lnformationstagung Turbinen, 2002, no. 518, pp. 157–183.
LibreCat
 
[21]
2001 | Conference Paper | LibreCat-ID: 8921
L. Panning, W. Sextro, and K. Popp, “Schwingungsanalyse verstimmter Schaufelkränze mit Reibelementen,” in Schwingungen in rotierenden Maschinen VI SIRM, Referate der Tagung in Wien, 2001, pp. 297–306.
LibreCat
 
[20]
2001 | Journal Article | LibreCat-ID: 8922
W. Sextro, “Heat and Wear Generation for Rolling Contacts,” Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), vol. 81, pp. 225–226, 2001.
LibreCat
 
[19]
2001 | Conference Paper | LibreCat-ID: 8923
W. Sextro, “Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction,” in ASME Design Engineering Technical Conferences, 2001, no. DETC2001/VIB-21512, pp. 1–12.
LibreCat
 
[18]
2001 | Journal Article | LibreCat-ID: 8924
W. Sextro, K. Popp, and T. Krzyzynski, “Localization in Nonlinear Mistuned Systems with Cyclic Symmetry,” Nonlinear Dynamics, vol. 25, no. 1–3, pp. 207–220, 2001.
LibreCat | DOI
 
[17]
2000 | Journal Article | LibreCat-ID: 8918
T. Krzyzynski, K. Popp, and W. Sextro, “On some regularities in dynamic response of cyclic periodic structures,” Chaos, Solitons \& Fractals, vol. 11, no. 10, pp. 1597–1609, 2000.
LibreCat | DOI
 
[16]
2000 | Conference Paper | LibreCat-ID: 8919
L. Panning, W. Sextro, and K. Popp, “Optimization of Interblade Friction Damper,” in International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 2000, pp. 1–8.
LibreCat
 
[15]
2000 | Conference Paper | LibreCat-ID: 8920
W. Sextro, “The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification,” in International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 2000, pp. 1–8.
LibreCat
 
[14]
1999 | Conference Paper | LibreCat-ID: 8909
K. Popp and W. Sextro, “Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW) -lnformationstagung Turbinen, 1999, no. 504, pp. 21–38.
LibreCat
 
[13]
1999 | Conference Paper | LibreCat-ID: 8910
W. Sextro, “Experimental verification of a non-Hertzian contact model,” in International conference on computational methods in contact mechanics, 1999, pp. 181–190.
LibreCat
 
[12]
1999 | Conference Paper | LibreCat-ID: 8911
W. Sextro, “Forced Vibration of Elastic Structures with Friction Contacts,” in ASME Design Engineering Technical Conferences, 1999, no. DETC99/VIB-8180, pp. 1–10.
LibreCat
 
[11]
1999 | Journal Article | LibreCat-ID: 8912
W. Sextro and K. Popp, “Ein ebenes Reibkontaktmodell zur Berechnung von Schaufelschwingungen mit Reibelementen,” Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), vol. 79, pp. 311–312, 1999.
LibreCat
 
[10]
1999 | Conference Paper | LibreCat-ID: 8913
W. Sextro and K. Popp, “Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW), 1999, no. 686, p. 56.
LibreCat
 
[9]
1998 | Conference Paper | LibreCat-ID: 8907
W. Sextro, K. Popp, and I. Wolter, “Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers,” in International Congress on Combustion Engines, Proceedings of the 22nd CIMAC, 1998, vol. 1, pp. 257–270.
LibreCat
 
[8]
1998 | Conference Paper | LibreCat-ID: 8908
W. Sextro, K. Popp, and I. Wolter, “Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers,” in The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7, 1998, vol. B, pp. 621–630.
LibreCat
 
[7]
1997 | Conference Paper | LibreCat-ID: 8902
K. Popp and W. Sextro, “Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW) -lnformationstagung Turbinen, 1997, no. 496, pp. 131–142.
LibreCat
 
[6]
1997 | Conference Paper | LibreCat-ID: 8903
W. Sextro, “Schwingungsverhalten von Schaufelkränzen mit Reibelementen bei Frequenzverstimmung,” in VDI-Reihe, 1997, vol. 11, no. 245.
LibreCat
 
[5]
1997 | Conference Paper | LibreCat-ID: 8904
W. Sextro, K. Popp, and I. Wolter, “Improved reliability of bladed disks due to friction dampers,” in The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition, 1997.
LibreCat
 
[4]
1996 | Conference Paper | LibreCat-ID: 8896
K. Popp and W. Sextro, “Schwingungsverhalten eines Schaufelkranzes mit Reibelementen bei Frequenzverstimmung,” in Forschungsvereinigung Verbrennungskraftmaschinen (FW) - lnformationstagung Turbinen, 1996, no. 490, pp. 53–76.
LibreCat
 
[3]
1996 | Conference Paper | LibreCat-ID: 8897
K. Popp and W. Sextro, “Dynamical Behaviour of a Bladed Disk with Friction Dampers,” in The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH, 1996, vol. 1, no. 518, pp. 157–183.
LibreCat
 
[2]
1993 | Journal Article | LibreCat-ID: 8895
W. Sextro and B. Schmalhorst, “Static Behaviour of Drill Strings in Curved Boreholes,” Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), vol. 73, pp. 255–257, 1993.
LibreCat
 
[1]
1991 | Book Chapter | LibreCat-ID: 8894
P. Stelter and W. Sextro, “Bifurcations in Dynamic Systems with Dry Friction,” in Bifurcation and Chaos: Analysis, Algorithms, Applications, vol. 97, R. Seydel, F. W. Schneider, T. Küpper, and H. Troger, Eds. Birkhäuser Basel, 1991, pp. 343–347.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: IEEE

Export / Embed