Walter Sextro

Lehrstuhl für Dynamik und Mechatronik (LDM)
walter.sextro@uni-paderborn.de
ID
21220

198 Publications

Mark all

[198]
2024 | Journal Article | LibreCat-ID: 51518
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, Tobias Hemsel, and Walter Sextro. “Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions.” Electronics 13, no. 3 (2024). https://doi.org/10.3390/electronics13030521.
LibreCat | DOI
 
[197]
2023 | Conference Paper | LibreCat-ID: 46813 | OA
Wohlleben, Meike Claudia, Lars Muth, Sebastian Peitz, and Walter Sextro. “Transferability of a Discrepancy Model for the Dynamics of Electromagnetic Oscillating Circuits.” In Proceedings in Applied Mathematics and Mechanics. Wiley, 2023. https://doi.org/10.1002/pamm.202300039.
LibreCat | DOI | Download (ext.)
 
[196]
2023 | Conference Paper | LibreCat-ID: 47116 | OA
Aimiyekagbon, Osarenren Kennedy, Alexander Löwen, Amelie Bender, Lars Muth, and Walter Sextro. “Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System.” In Proceedings of the Asia Pacific Conference of the PHM Society 2023 , Vol. 4, 2023. https://doi.org/10.36001/phmap.2023.v4i1.3596.
LibreCat | DOI | Download (ext.)
 
[195]
2023 | Conference Abstract | LibreCat-ID: 51117
Scheidemann, Claus, Tobias Hemsel, Olga Friesen, Leander Claes, and Walter Sextro. “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” 2023.
LibreCat
 
[194]
2023 | Conference Abstract | LibreCat-ID: 51118
Scheidemann, Claus, Tobias Hemsel, Olga Friesen, Leander Claes, and Walter Sextro. “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” 2023.
LibreCat
 
[193]
2023 | Conference Abstract | LibreCat-ID: 51119
Scheidemann, Claus, Oliver Ernst Caspar Hagedorn, Tobias Hemsel, and Walter Sextro. “Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process,” 2023.
LibreCat
 
[192]
2023 | Book Chapter | LibreCat-ID: 51338
Schütte, Jan, and Walter Sextro. “Einfluss der Radhubkinematik auf den Reifenverschleiß.” In 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, 2425:165–80. VDI-Berichte. VDI Verlag GmbH, 2023.
LibreCat
 
[191]
2022 | Conference Paper | LibreCat-ID: 29934
Muth, Lars, Christian Noll, and Walter Sextro. “Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data.” In Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021, edited by Anna Orlova and David Cole. Lecture Notes in Mechanical Engineering. Cham: Springer, 2022. https://doi.org/10.1007/978-3-031-07305-2_92.
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Book Chapter | LibreCat-ID: 29727
Wohlleben, Meike Claudia, Amelie Bender, Sebastian Peitz, and Walter Sextro. “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction.” In Machine Learning, Optimization, and Data Science. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-030-95470-3_8.
LibreCat | DOI | Download (ext.)
 
[189]
2022 | Conference Paper | LibreCat-ID: 30371
Hagedorn, Oliver Ernst Caspar, Marian Broll, Olaf Kirsch, Tobias Hemsel, and Walter Sextro. “Experimental Investigation of the Influence of Different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding.” In CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, 138–43. Berlin: VDE VERLAG GMBH, 2022.
LibreCat
 
[188]
2022 | Newspaper Article | LibreCat-ID: 47159
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, and Walter Sextro. “On the Applicability of Time Series Features as Health Indicators for Technical Systems Operating under Varying Conditions.” Condition Monitor, 2022.
LibreCat
 
[187]
2022 | Conference Paper | LibreCat-ID: 34104
Scheidemann, Claus, Olaf Kirsch, Tobias Hemsel, and Walter Sextro. “Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding.” In 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). IEEE, 2022. https://doi.org/10.1109/estc55720.2022.9939478.
LibreCat | DOI
 
[186]
2022 | Patent | LibreCat-ID: 9980
Reinke, Kai, Amelie Bender, Tobias Meyer, Walter Sextro, and James Kuria Kimotho. “Patent DE 10 2017 000 926 B4: Gerät Mit Wenigstens Einem Elastisch Verformbaren Bauteil, Insbesondere Einem Gummi-Metall-Lager Und Mit Einer Einrichtung Zur Feststellung Des Beginns Einer Verschleißbedingten Bauteil-Restnutzungsdauer, Sowie Verfahren Zur Bestimmung Der Bauteil-Restnutzungsdauer.,” 2022.
LibreCat | Files available
 
[185]
2022 | Report | LibreCat-ID: 52045
Scheidemann, Claus, Tobias Hemsel, and Walter Sextro. Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022. https://doi.org/10.2314/KXP:1879655276.
LibreCat | Files available | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 27652
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, and Walter Sextro. “Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten .” In VDI-Berichte 2391, 197–210. Düsseldorf: VDI Verlag GmbH, 2021.
LibreCat
 
[183]
2021 | Journal Article | LibreCat-ID: 21436
Schemmel, Reinhard, Viktor Krieger, Tobias Hemsel, and Walter Sextro. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.” Microelectronics Reliability 119 (2021): 114077. https://doi.org/10.1016/j.microrel.2021.114077.
LibreCat | DOI
 
[182]
2021 | Conference Paper | LibreCat-ID: 22724 | OA
Bender, Amelie, and Walter Sextro. “Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties.” In Proceedings of the European Conference of the PHM Society 2021, edited by Phuc Do, Steve King, and Olga Fink, Vol. 6, 2021. https://doi.org/10.36001/phme.2021.v6i1.2843 .
LibreCat | DOI | Download (ext.)
 
[181]
2021 | Conference Paper | LibreCat-ID: 22507 | OA
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, and Walter Sextro. “On the Applicability of Time Series Features as Health Indicators for Technical Systems Operating under Varying Conditions.” In Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021), n.d.
LibreCat | Files available
 
[180]
2021 | Conference Paper | LibreCat-ID: 27111 | OA
Aimiyekagbon, Osarenren Kennedy, Lars Muth, Meike Claudia Wohlleben, Amelie Bender, and Walter Sextro. “Rule-Based Diagnostics of a Production Line.” In Proceedings of the European Conference of the PHM Society 2021, edited by Phuc Do, Steve King, and Olga Fink, 6:527–36, 2021. https://doi.org/10.36001/phme.2021.v6i1.3042.
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 27508 | OA
Schütte, Jan, and Walter Sextro. “Tire Wear Reduction Based on an Extended Multibody Rear Axle Model.” Vehicles, 2021, 233–56. https://doi.org/10.3390/vehicles3020015.
LibreCat | DOI | Download (ext.)
 
[178]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin, Sven, Jan Schütte, C. Bäumler, Walter Sextro, and Thomas Tröster. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics 6 (2021). https://doi.org/10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[177]
2020 | Conference Paper | LibreCat-ID: 17355
Schemmel, Reinhard, Claus Scheidemann, Tobias Hemsel, Olaf Kirsch, and Walter Sextro. “Experimental Analysis and Modelling of Bond Formation in Ultrasonic Heavy Wire Bonding.” In CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 1–6, 2020.
LibreCat
 
[176]
2020 | Book | LibreCat-ID: 9857
Magnus, Kurt, Karl Popp, and Walter Sextro. Schwingungen. Springer Vieweg Wiesbaden, 2020. https://doi.org/10.1007/978-3-658-31116-2.
LibreCat | DOI
 
[175]
2020 | Conference Paper | LibreCat-ID: 17706
Schemmel, Reinhard, Viktor Krieger, Tobias Hemsel, and Walter Sextro. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.” In 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2020. https://doi.org/10.1109/eurosime48426.2020.9152679.
LibreCat | DOI
 
[174]
2020 | Conference Paper | LibreCat-ID: 17810
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, and Walter Sextro. “Evaluation of Time Series Forecasting Approaches for the Reliable Crack Length Prediction of Riveted Aluminium Plates given Insufficient Data.” In PHM Society European Conference, Vol. 5, 2020.
LibreCat
 
[173]
2020 | Book Chapter | LibreCat-ID: 22007
Schütte, Jan, and Walter Sextro. “Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear.” In Lecture Notes in Mechanical Engineering. Cham, 2020. https://doi.org/10.1007/978-3-030-38077-9_201.
LibreCat | DOI
 
[172]
2020 | Patent | LibreCat-ID: 9981
Reinke, Kai, Amelie Bender, Tobias Meyer, Walter Sextro, and James Kuria Kimotho. “Patent EP 3 358 332 B1: Verfahren Zur Bestimmung Des Beginns Einer Verschleißbedingten Bauteil-Restnutzungsdauer Eines Elastisch Verformbaren Bauteils, Als Strukturteil Und/Oder Lagerteil Eines Geräts.,” 2020.
LibreCat | Files available
 
[171]
2019 | Conference Paper | LibreCat-ID: 23716
Kaul, Thorben, Julian Hentze, Walter Sextro, and Iris Gräßler. “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung.” In Fachtagung Mechatronik 2019 Paderborn, edited by Torsten Bertram, Burkhard Corves, Iris Gräßler, and Klaus Janschek, 19–24, 2019.
LibreCat
 
[170]
2019 | Conference Paper | LibreCat-ID: 15475
Schütte, Jan, Walter Sextro, and Sergej Kohl. “Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen.” In Fachtagung Mechatronik 2019. Paderborn: Universitätsbibliothek Paderborn, 2019, 2019. https://doi.org/10.17619/UNIPB/1-777.
LibreCat | DOI
 
[169]
2019 | Conference Paper | LibreCat-ID: 14852
Dunst, Paul, Peter Bornmann, Tobias Hemsel, Walter Littmann, and Walter Sextro. “Atomization of Fluids with Ultrasound.” In Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019), edited by Joost Lötters and Gerald Urban, 140–43. Enschede, The Netherlands, 2019.
LibreCat | Files available
 
[168]
2019 | Conference Paper | LibreCat-ID: 15244
Hagedorn, Oliver Ernst Caspar, Daniel Pielsticker, Tobias Hemsel, and Walter Sextro. “Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen.” In 2. VDI-Fachtagung Schwingungen 2019. VDI Verlag GmbH · Düsseldorf 2019, 2019.
LibreCat
 
[167]
2019 | Book | LibreCat-ID: 10002
Sextro, Walter, and Michael Brökelmann. Intelligente Herstellung Zuverlässiger Kupferbondverbindungen. Vol. VIII. Springer Verlag, 2019. https://doi.org/10.1007/978-3-662-55146-2.
LibreCat | DOI
 
[166]
2019 | Conference Paper | LibreCat-ID: 10255
Bender, Amelie, Kai Reinke, and Walter Sextro. “Konstruktion Und Zustandsüberwachung Eines Gummi-Metall-Teils Mit Integriertem Thermoelement.” In 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, VDI-Berichte 2346:241–48. Bremen 2019, 2019.
LibreCat
 
[165]
2019 | Conference Paper | LibreCat-ID: 10257
Kaul, Thorben, Julian Hentze, Walter Sextro, and Iris Gräßler. “Integration von Verlässlichkeitsmodellen Der Entwicklung in Einen Digitalen Zwilling Zur Umsetzung Einer Vorausschauenden Instandhaltung.” In Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
 
[164]
2019 | Conference Paper | LibreCat-ID: 10258
Dunst, Paul, Tobias Hemsel, Peter Bornmann, Walter Littmann, and Walter Sextro. “Modellbasierte Und Experimentelle Charakterisierung von Intensiven Ultraschall-Stehwellenfeldern Für Die Zerstäubung Hochviskoser Flüssigkeiten.” In DAGA 2019, 2019.
LibreCat
 
[163]
2019 | Journal Article | LibreCat-ID: 10334
Schemmel, Reinhard, Tobias Hemsel, Collin Dymel, Matthias Hunstig, Michael Brökelmann, and Walter Sextro. “Using Complex Multi-Dimensional Vibration Trajectories in Ultrasonic Bonding and Welding.” Sensors and Actuators A: Physical 295 (2019): 653–62. https://doi.org/10.1016/j.sna.2019.04.025.
LibreCat | DOI
 
[162]
2019 | Conference Paper | LibreCat-ID: 13460 | OA
Bender, Amelie, Lennart Schinke, and Walter Sextro. “Remaining Useful Lifetime Prediction Based on Adaptive Failure Thresholds.” In Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), edited by Michael Beer and Enrico Zio, 1262–69, 2019.
LibreCat | Download (ext.)
 
[161]
2019 | Conference Paper | LibreCat-ID: 13461 | OA
Kaul, Thorben, Amelie Bender, and Walter Sextro. “Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems.” In Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), edited by Michael Beer and Enrico Zio, 2340–47, 2019.
LibreCat | Download (ext.)
 
[160]
2018 | Conference Paper | LibreCat-ID: 9987
Bender, Amelie, and Walter Sextro. “A Particle Filtering Approach for Temperature Based Prognostics.” In Safety and Reliability – Safe Societies in a Changing World, 1025–33. Trondheim, Norway, 2018.
LibreCat
 
[159]
2018 | Journal Article | LibreCat-ID: 9990
Dunst, Paul, Peter Bornmann, Tobias Hemsel, Walter. Littmann, and Walter Sextro. “Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders.” ACTUATOR 2018; 16th International Conference on New Actuators, 2018, 142–45.
LibreCat
 
[158]
2018 | Journal Article | LibreCat-ID: 9991
Dunst, Paul, Peter Bornmann, Tobias Hemsel, and Walter Sextro. “Vibration-Assisted Handling of Dry Fine Powders.” Actuators 2018, 7(2)., 2018, 1–11. https://doi.org/10.3390/act7020018.
LibreCat | DOI
 
[157]
2018 | Conference Paper | LibreCat-ID: 9992
Dymel, Collin, Paul Eichwald, Reinhard Schemmel, Tobias Hemsel, Michael Brökelmann, Matthias Hunstig, and Walter Sextro. “Numerical and Statistical Investigation of Weld Formation in a Novel Two-Dimensional Copper-Copper Bonding Process.” In (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 1–6, 2018.
LibreCat
 
[156]
2018 | Conference Paper | LibreCat-ID: 9993
Dymel, Collin, Reinhard Schemmel, Tobias Hemsel, Walter Sextro, Michael Brökelmann, and Matthias Hunstig. “Experimental Investigations on the Impact of Bond Process Parameters in Two-Dimensional Ultrasonic Copper Bonding.” In (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 41–44, 2018.
LibreCat
 
[155]
2018 | Book | LibreCat-ID: 9995
Meyer, Tobias, Thorben Kaul, James Kuria Kimotho, and Walter Sextro. Steigerung Der Intelligenz Mechatronischer Systeme. Vol. Steigerung der Verlässlichkeit technischer Systeme. Springer Nature Switzerland AG. Part of Springer Nature., 2018.
LibreCat
 
[154]
2018 | Conference Paper | LibreCat-ID: 9997
Schemmel, Reinhard, Simon Althoff, Walter Sextro, Andreas Unger, Michael Brökelmann, and Matthias Hunstig. “Effects of Different Working Frequencies on the Joint Formation in Copper Wire Bonding.” In CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018), 230–35. Stuttgart, Germany, 2018.
LibreCat
 
[153]
2018 | Conference Paper | LibreCat-ID: 9998
Schemmel, Reinhard, Tobias Hemsel, and Walter Sextro. “Numerical and Experimental Investigations in Ultrasonic Heavy Wire Bonding.” In 6th European Conference on Computational Mechanics (ECCM 6), 1–12. Glasgow, UK, 2018.
LibreCat
 
[152]
2018 | Conference Paper | LibreCat-ID: 9999
Unger, Andreas, Matthias Hunstig, Tobias Meyer, Michael Brökelmann, and Walter Sextro. “Intelligent Production of Wire Bonds Using Multi-Objective Optimization – Insights, Opportunities and Challenges.” In In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, Vol. Vol. 2018, No. 1, pp. 000572-000577., 2018. https://doi.org/10.4071/2380-4505-2018.1.000572.
LibreCat | DOI
 
[151]
2017 | Conference Paper | LibreCat-ID: 23560
Hentze, Julian, Thorben Kaul, Iris Gräßler, and Walter Sextro. “Integrated Modeling of Behavior and Reliability in System Development.” In ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB, edited by Anja Maier, Stanko Skec, Chris McKesson, and Mike Van der Loos, 385–94. Design Society, 2017.
LibreCat
 
[150]
2017 | Conference Paper | LibreCat-ID: 9969
Bender, Amelie, Thorben Kaul, and Walter Sextro. “Entwicklung Eines Condition Monitoring Systems Für Gummi-Metall-Elemente.” In Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, 347–58. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, 2017.
LibreCat
 
[149]
2017 | Conference Paper | LibreCat-ID: 9970
Bender, Amelie, James Kuria Kimotho, Sergej Kohl, Walter Sextro, and Kai Reinke. “Modellbasierte Prognose Der Nutzbaren Restlebensdauer von Gummi-Metall-Elementen.” In 15. Internationale Schienenfahrzeugtagung, 123–25, 2017.
LibreCat
 
[148]
2017 | Conference Paper | LibreCat-ID: 9971
Bender, Amelie, Walter Sextro, and Kai Reinke. “Neuartiges Konzept Zur Lebensdauerprognose von Gummi-Metall-Elementen.” In VDI-Berichte 2301, 49–60, 2017.
LibreCat
 
[147]
2017 | Journal Article | LibreCat-ID: 9972
Dunst, Paul, Tobias Hemsel, and Walter Sextro. “Analysis of Pipe Vibration in an Ultrasonic Powder Transportationsystem.” Elsevier Sensors and Actuators A 263 (2017): 733–36.
LibreCat
 
[146]
2017 | Journal Article | LibreCat-ID: 9973
Eichwald, Paul, Simon Althoff, Reinhard Schemmel, Walter Sextro, Andreas Unger, Michael Brökelmann, and Matthias Hunstig. “Multi-Dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design.” IMAPSource Vol. 2017, No. 1 (2017).
LibreCat
 
[145]
2017 | Conference Paper | LibreCat-ID: 9974
Hentze, Julian, Thorben Kaul, Iris Grässler, and Walter Sextro. “Integrated Modeling Og Behavior and Reliability in System Development.” In ICED17, 21st International Conference on Enginieering Design, 385–94, 2017.
LibreCat
 
[144]
2017 | Journal Article | LibreCat-ID: 9976
Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Formulation of Reliability-Related Objective Functions for Design of Intelligent Mechatronic Systems.” SAGE Journals Vol. 231(4) (2017): 390–99. https://doi.org/10.1177/1748006X17709376.
LibreCat | DOI
 
[143]
2017 | Conference Paper | LibreCat-ID: 9978
Kimotho, James Kuria, Walter Sextro, and Tobias Hemsel. “Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing.” In IEEE Transactions on Reliability, 1–10, 2017. https://doi.org/10.1109/TR.2017.2710260.
LibreCat | DOI
 
[142]
2017 | Conference Paper | LibreCat-ID: 9982
Schemmel, Reinhard, Tobias Hemsel, and Walter Sextro. “MoRFUS: Mobile Reinigungseinheit Für Förderketten Basierend Auf Ultraschall.” In 43. Deutsche Jahrestagung Für Akustik, 611–14. Kiel 2017, 2017.
LibreCat
 
[141]
2017 | Conference Paper | LibreCat-ID: 9983
Schulze, Sebastian, Walter Sextro, and K. Kister. “Model Based Optimization of Dynamics in Adaptive Headlamps.” In Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
 
[140]
2017 | Conference Paper | LibreCat-ID: 9985
Sextro, Walter, Tobias Meyer, Thorben Kaul, and James Kuria Kimotho. “Entwicklung Verlässlicher, Intelligenter Systeme.” In VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte., 17–30. Leonberg, 2017.
LibreCat
 
[139]
2016 | Conference Paper | LibreCat-ID: 9955
Althoff, Simon, Tobias Meyer, Andreas Unger, Walter Sextro, and Florian Eacock. “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools.” In IEEE 66th Electronic Components and Technology Conference, 2103–10, 2016. https://doi.org/10.1109/ECTC.2016.234.
LibreCat | DOI
 
[138]
2016 | Journal Article | LibreCat-ID: 9957
Brökelmann, Michael, Andreas Unger, Tobias Meyer, Simon Althoff, Walter Sextro, Matthias Hunstig, Florian Biermann, and Karsten Guth. “Kupferbondverbindungen Intelligent Herstellen.” Wt-Online 7/8 (2016): 512–19.
LibreCat
 
[137]
2016 | Conference Paper | LibreCat-ID: 9958
Dunst, Paul, Walter Sextro, Peter Bornmann, Tobias Hemsel, and Walter Littmann. “Transportation of Dry Fine Powders by Coordinated Friction Manipulation.” In PAMM Proc. Appl. Math. Mech. 16, 635–36. Braunschweig, 2016. https://doi.org/10.1002/pamm.201610306.
LibreCat | DOI
 
[136]
2016 | Conference Paper | LibreCat-ID: 9960
Eichwald, Paul, Andreas Unger, Florian Eacock, Simon Althoff, Walter Sextro, Karsten Guth, and Michael Brökelmann. “Micro Wear Modeling in Copper Wire Wedge Bonding.” In IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
 
[135]
2016 | Conference Paper | LibreCat-ID: 9961
Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Modeling of Complex Redundancy in Technical Systems with Bayesian Networks.” In Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
 
[134]
2016 | Conference Paper | LibreCat-ID: 9963
Kohl, Sergej, Walter Sextro, and Sebastian Schulze. “Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis Using ADAMS.” In The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 1–12. Cyberjaya, Malaysia, 2016, 2016.
LibreCat
 
[133]
2016 | Conference Paper | LibreCat-ID: 9964
Lessmeier, Christian, James Kuria Kimotho, Detmar Zimmer, and Walter Sextro. “Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification.” In European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
 
[132]
2016 | Conference Paper | LibreCat-ID: 9966
Meyer , Tobias, Andreas Unger, Simon Althoff, Walter Sextro, Michael Brökelmann, Matthias Hunstig, and Karsten Guth. “Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation.” In IEEE 66th Electronic Components and Technology Conference, 622–28, 2016. https://doi.org/10.1109/ECTC.2016.215.
LibreCat | DOI
 
[131]
2016 | Conference Paper | LibreCat-ID: 9967
Schulze, Sebastian, Walter Sextro, and Sergej Kohl. “Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems.” In 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 1–11, 2016.
LibreCat
 
[130]
2016 | Conference Paper | LibreCat-ID: 9968
Unger, Andreas, Reinhard Schemmel, Tobias Meyer, Florian Eacock, Paul Eichwald, Simon Althoff, Walter Sextro, Michael Brökelmann, Matthias Hunstig, and Karsten Guth. “Validated Simulation of the Ultrasonic Wire Bonding Process.” In Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 251–54. IEEE CPMT Symposium Japan, 2016.
LibreCat
 
[129]
2015 | Conference Paper | LibreCat-ID: 9943
Althoff, Simon, Andreas Unger, Walter Sextro, and Florian Eacock. “Improving the Cleaning Process in Copper Wire Bonding by Adapting Bonding Parameters.” In 2015 17th Electronics Packaging Technology Conference, 1–6, 2015. https://doi.org/10.1109/EPTC.2015.7412402.
LibreCat | DOI
 
[128]
2015 | Journal Article | LibreCat-ID: 9944
Bornmann, Peter, Tobias Hemsel, Walter Sextro, Gianluca Memoli, Mark Hodnett, and Bajram Zeqiri. “Kavitationsdetektion Mittels Self-Sensing-Ultraschallwandler.” Tm - Technisches Messen 82, no. 2 (2015): 73–84. https://doi.org/10.1515/teme-2015-0017.
LibreCat | DOI
 
[127]
2015 | Conference Paper | LibreCat-ID: 9945
Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Integrierte Modellierung Der Dynamik Und Der Verlässlichkeit Komplexer Mechatronischer Systeme.” In 10. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Roman Dumitrescu, Franz Rammig, Wilhelm Schäfer, and Ansgar Trächtler, 101–12. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2015.
LibreCat
 
[126]
2015 | Conference Paper | LibreCat-ID: 9946
Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems.” In European Safety and Reliability Conference (ESREL2015), edited by Podofillini et al.}. London: Taylor and Francis, 2015. https://doi.org/10.1201/b19094-290.
LibreCat | DOI
 
[125]
2015 | Conference Paper | LibreCat-ID: 9947
Kimotho, James Kuria, and Walter Sextro. “Comparison and Ensemble of Temperature-Based and Vibration-Based Methods for Machinery Prognostics.” In Annual Conference of the Prognostics and Health Management Society 2015, Vol. 6, 2015.
LibreCat
 
[124]
2015 | Conference Paper | LibreCat-ID: 9949
Meyer, Tobias, Thorben Kaul, and Walter Sextro. “Advantages of Reliability-Adaptive System Operation for Maintenance Planning.” In Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 940–45, 2015. https://doi.org/10.1016/j.ifacol.2015.09.647.
LibreCat | DOI
 
[123]
2015 | Conference Paper | LibreCat-ID: 9950
Meyer, Tobias, James Kuria Kimotho, and Walter Sextro. “Anforderungen an Condition-Monitoring-Verfahren Zur Nutzung Im Zuverläsigkeitsgeregelten Betrieb Adaptiver Systeme.” In 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverlässiger Produkte, 111–22. Leonberg, 2015.
LibreCat
 
[122]
2015 | Conference Paper | LibreCat-ID: 9951
Meyer, Tobias, Andreas Unger, Simon Althoff, Walter Sextro, Michael Brökelmann, Matthias Hunstig, and Karsten Guth. “Modeling and Simulation of the Ultrasonic Wire Bonding Process.” In 2015 17th Electronics Packaging Technology Conference, 2015. https://doi.org/10.1109/EPTC.2015.7412377.
LibreCat | DOI
 
[121]
2015 | Conference Paper | LibreCat-ID: 9952
Schulte, Frank, Jan Neuhaus, and Walter Sextro. “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties.” In Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 1109–17, 2015.
LibreCat
 
[120]
2015 | Conference Paper | LibreCat-ID: 9954
Unger, Andreas, Walter Sextro, Tobias Meyer, Paul Eichwald, Simon Althoff, Florian Eacock, and Michael Brökelmann. “Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear.” In 2015 17th Electronics Packaging Technology Conference, 2015. https://doi.org/10.1109/EPTC.2015.7412375.
LibreCat | DOI
 
[119]
2014 | Book | LibreCat-ID: 25168
Gausemeier, Jürgen, Franz-Josef Rammig, Wilhelm Schäfer, and Walter Sextro. Dependability of Self-Optimizing Mechatronic Systems. Heidelberg, Germany: Springer-Verlag, 2014.
LibreCat
 
[118]
2014 | Book Chapter | LibreCat-ID: 25173
Dellnitz, Michael, Kathrin Flaßkamp, Philip Hartmann, Martin Krüger, Tobias Meyer, Claudia Priesterjahn, Sina Ober-Blöbaum, et al. “Self-Optimizing Mechatronic Systems.” In Dependability of Self-Optimizing Mechatronic Systems, Kapitel: 1.1, 3–12. Heidelberg, Germany: Springer-Verlag, 2014.
LibreCat
 
[117]
2014 | Book Chapter | LibreCat-ID: 28394
Dorociak, Rafal , J{\"u}rgen Gausemeier, Peter Iwanek, Tobias Meyer, Walter Sextro, and Christoph Sondermann-W{\"o}lke. “Development of the Active Guidance Module.” In Dependability of Self-Optimizing Mechatronic Systems, 178–82. AACE Press, 2014.
LibreCat
 
[116]
2014 | Book | LibreCat-ID: 28396
Gausemeier, J{\"u}rgen, Franz-Josef Rammig, Wilhelm Sch{\"a}fer, and Walter Sextro. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany, 2014.
LibreCat
 
[115]
2014 | Book Chapter | LibreCat-ID: 28399
Dorociak, Rafal, J{\"u}rgen Gausemeier, Peter Iwanek, Tobias Meyer, and Walter Sextro. “Selecting Suitable Methods Using the Methodology.” In Dependability of Self-Optimizing Mechatronic Systems, 174–78. Springer-Verlag Berlin Heidelberg, 2014.
LibreCat
 
[114]
2014 | Book Chapter | LibreCat-ID: 28400
Dorociak, Rafal, J{\"u}rgen Gausemeier, Peter Iwanek, Tobias Meyer, and Walter Sextro. “Selecting Suitable Methods Using the Methodology.” In Dependability of Self-Optimizing Mechatronic Systems, 174–78. Springer-Verlag Berlin Heidelberg, 2014.
LibreCat
 
[113]
2014 | Book Chapter | LibreCat-ID: 28410
Iwanek, Peter , Tobias Meyer, Claudia Priesterjahn, Walter Sextro, and Mareen Va{\ss}holz. “Challenges.” In Dependability of Self-Optimizing Mechatronic Systems, 12–15. Springer-Verlag, Heidelberg, Germany, 2014.
LibreCat
 
[112]
2014 | Conference Paper | LibreCat-ID: 9868
Althoff, Simon, Jan Neuhaus, Tobias Hemsel, and Walter Sextro. “Improving the Bond Quality of Copper Wire Bonds Using a Friction Model Approach.” In Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 1549–55, 2014. https://doi.org/10.1109/ECTC.2014.6897500.
LibreCat | DOI
 
[111]
2014 | Conference Paper | LibreCat-ID: 9869
Bornmann, Peter, Tobias Hemsel, Walter Sextro, Gianluca Memoli, Mark Hodnett, and Bajram Zeqiri. “Self-Sensing Ultrasound Transducer for Cavitation Detection.” In 2014 IEEE International Ultrasonics Symposium Proceedings, 663–66, 2014. https://doi.org/10.1109/ULTSYM.2014.0163.
LibreCat | DOI
 
[110]
2014 | Conference Paper | LibreCat-ID: 9871
Eichwald, Paul, Walter Sextro, Simon Althof, Florian Eacock, Andreas Unger, Tobias Meyer, and Karsten Guth. “Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding.” In Proceedings of the 47th International Symposium on Microelectronics, 856–61, 2014. https://doi.org/10.4071/isom-THP34.
LibreCat | DOI
 
[109]
2014 | Book | LibreCat-ID: 9873
Gausemeier, Jürgen, Franz Josef Rammig, Wilhelm Schäfer, and Walter Sextro. Dependability of Self-Optimizing Mechatronic Systems. Vol. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014.
LibreCat
 
[108]
2014 | Journal Article | LibreCat-ID: 9874
Hemsel, Tobias, Peter Bornmann, Takeshi Morita, Christoph Sondermann-Wölke, and Walter Sextro. “Reliability Analysis of Ultrasonic Power Transducers.” Archive of Applied Mechanics, 2014, 1–7. https://doi.org/10.1007/s00419-014-0965-4.
LibreCat | DOI
 
[107]
2014 | Journal Article | LibreCat-ID: 9876
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “High-Velocity Operation of Piezoelectric Inertia Motors: Experimental Validation.” Archive of Applied Mechanics, 2014, 1–9. https://doi.org/10.1007/s00419-014-0940-0.
LibreCat | DOI
 
[106]
2014 | Conference Paper | LibreCat-ID: 9879
Kimotho, James Kuria , Tobias Meyer, and Walter Sextro. “PEM Fuel Cell Prognostics Using Particle Filter with Model Parameter Adaptation.” In Prognostics and Health Management (PHM), 2014 IEEE Conference On, 1–6, 2014. https://doi.org/10.1109/ICPHM.2014.7036406.
LibreCat | DOI
 
[105]
2014 | Conference Paper | LibreCat-ID: 9880
Kimotho, James Kuria, and Walter Sextro. “An Approach for Feature Extraction and Selection from Non-Trending Data for Machinery Prognosis.” In Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, Vol. 5, 2014.
LibreCat
 
[104]
2014 | Journal Article | LibreCat-ID: 9881
Kimotho, James Kuria, and Walter Sextro. “Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation.” PAMM 14, no. 1 (2014): 815–16. https://doi.org/10.1002/pamm.201410388.
LibreCat | DOI
 
[103]
2014 | Journal Article | LibreCat-ID: 9882
Kohl, Sergej, Walter Sextro, and Armin Zuber. “Tire Footprint Analysis Depending on the Elastokinematics of a Multi-Link Suspension System Using Multi-Body Dynamics Simulation.” PAMM 14, no. 1 (2014): 65–66. https://doi.org/10.1002/pamm.201410020.
LibreCat | DOI
 
[102]
2014 | Book Chapter | LibreCat-ID: 9883
Meyer, Tobias, Claudia Priesterjahn, and Walter Sextro. “Conclusion and Outlook.” In Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier, Franz Josef Rammig, Wilhelm Schäfer, and Walter Sextro, 189–90. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014. https://doi.org/10.1007/978-3-642-53742-4_5.
LibreCat | DOI
 
[101]
2014 | Journal Article | LibreCat-ID: 9885
Meyer , Tobias, Christoph Sondermann-Wölke, and Walter Sextro. “Method to Identify Dependability Objectives in Multiobjective Optimization Problem.” Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence 15 (2014): 46–53. https://doi.org/10.1016/j.protcy.2014.09.033.
LibreCat | DOI
 
[100]
2014 | Conference Paper | LibreCat-ID: 9887
Neuhaus, Jan, and Walter Sextro. “Thermo-Mechanical Model for Wheel Rail Contact Using Coupled Point Contact Elements.” In Proceedings of the 5th International Conference on Computational Methods, edited by G.R. Liu and Z.W. Guan. ScienTech Publisher, 2014.
LibreCat
 
[99]
2014 | Journal Article | LibreCat-ID: 9888
Schulze, Sebastian, Walter Sextro, and Frank Grüter. “Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications.” PAMM 14, no. 1 (2014): 39–40. https://doi.org/10.1002/pamm.201410012.
LibreCat | DOI
 
[98]
2014 | Conference Paper | LibreCat-ID: 9889
Sprock, Christian, and Walter Sextro. “Time-Efficient Dynamic Analysis of Structures Exhibiting Nonlinear Peak Bending.” In Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 320–24, 2014. https://doi.org/10.1109/I2MTC.2014.6860760.
LibreCat | DOI
 
[97]
2014 | Conference Paper | LibreCat-ID: 9890
Sprock, Christian, and Walter Sextro. “Time-Efficient Analysis of Nonlinear Dynamic Behavior.” In Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, 293–94, 2014.
LibreCat
 
[96]
2014 | Conference Paper | LibreCat-ID: 9891
Sprock, Christian, and Walter Sextro. “Time-Efficient Analysis of Nonlinear Peak Bending Behavior.” In Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 1–8, 2014.
LibreCat
 
[95]
2014 | Conference Paper | LibreCat-ID: 9892
Sprock, Christian, and Walter Sextro. “Vibration Analysis of Mechanical Structures Using Multisine Excitation Techniques.” In Proceedings of 31st Danubia-Adria Symposium. 2014, 2014.
LibreCat
 
[94]
2014 | Book Chapter | LibreCat-ID: 9893
Trächtler, Ansgar, Christian Hölscher, Christoph Rasche, Claudia Priesterjahn, Detmar Zimmer, Jan Henning Keßler, Katharin Stahl, et al. “Introduction to Self-Optimization and Dependability.” In Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier, Franz Josef Rammig, Wilhelm Schäfer, and Walter Sextro, 1–24. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014. https://doi.org/10.1007/978-3-642-53742-4_1.
LibreCat | DOI
 
[93]
2014 | Book Chapter | LibreCat-ID: 9894
Trächtler, Ansgar, Bernd Kleinjohann, Christian Heinzemann, Christoph Rasche, Claudia Priesterjahn, Dominik Steenken, Heike Wehrheim, et al. “Case Study.” In Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier, Franz Josef Rammig, Wilhelm Schäfer, and Walter Sextro, 173–88. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014. https://doi.org/10.1007/978-3-642-53742-4_4.
LibreCat | DOI
 
[92]
2014 | Conference Paper | LibreCat-ID: 9895
Unger, Andreas, Walter Sextro, Simon Althoff, Paul Eichwald, Tobias Meyer, Florian Eacock, and Michael Brökelmann. “Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds.” In Proceedings of the 47th International Symposium on Microelectronics (IMAPS), 289–94. San Diego, CA, US, 2014.
LibreCat
 
[91]
2014 | Conference Paper | LibreCat-ID: 9896
Unger, Andreas, Walter Sextro, Simon Althoff, Tobias Meyer, Michael Brökelmann, Klaus Neumann, René Felix Reimann, Karsten Guth, and Daniel Bolowski. “Data-Driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding.” In Proceedings of 8th International Conference on Integrated Power Electronic Systems, 141:175–80, 2014.
LibreCat
 
[90]
2013 | Conference Paper | LibreCat-ID: 26973
Meyer, Tobias, Jan Henning Kessler, Walter Sextro, and Ansgar Trächtler. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” In The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
 
[89]
2013 | Book Chapter | LibreCat-ID: 23139
Kessler, Jan Henning, Tobias Meyer, Walter Sextro, Christoph Sondermann-Wölke, and Ansgar Trächtler. “Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept.” In Dependability of Self-Optimizing Mechatronic Systems, 55–62. Springer-Verlag, Heidelberg, Germany, 2013.
LibreCat
 
[88]
2013 | Conference Paper | LibreCat-ID: 23140
Meyer, Tobias, Jan Henning Kessler, Walter Sextro, and Ansgar Trächtler. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” In The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
 
[87]
2013 | Book Chapter | LibreCat-ID: 23149
Hölscher, Christian, Jan Henning Kessler, Tobias Meyer, Christoph Rasche, Peter Reinold, Walter Sextro, Christoph Sondermann-Wölke, and Detmar Zimmer. “Applications of Self-Optimizing Systems.” In Dependability of Self-Optimizing Mechatronic Systems, 16–22. Springer-Verlag, Heidelberg, Germany, 2013.
LibreCat
 
[86]
2013 | Journal Article | LibreCat-ID: 9794
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Increasing the Power of Piezoelectric Energy Harvesters by Magnetic Stiffening.” Journal of Intelligent Material Systems and Structures 24, no. 11 (2013): 1332–42. https://doi.org/10.1177/1045389X13483021.
LibreCat | DOI
 
[85]
2013 | Journal Article | LibreCat-ID: 9795
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Enhanced Energy Harvesting Using Multiple Piezoelectric Elements: Theory and Experiments.” Sensors and Actuators A: Physical 200 (2013): 138–46. https://doi.org/10.1016/j.sna.2013.01.008.
LibreCat | DOI
 
[84]
2013 | Conference Paper | LibreCat-ID: 9796
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems.” In Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, 159–61. Berichte Aus Dem IDS. Hannover, Germany, 2013.
LibreCat
 
[83]
2013 | Conference Paper | LibreCat-ID: 9797
Althoff, Simon, Jan Neuhaus, Tobias Hemsel, and Walter Sextro. “A Friction Based Approach for Modeling Wire Bonding.” In IMAPS 2013, 46th International Symposium on Microelectronics. Orlando (Florida), USA, 2013. https://doi.org/10.4071/isom-2013-TA67.
LibreCat | DOI
 
[82]
2013 | Conference Paper | LibreCat-ID: 9799
Eichwald, Paul, Walter Sextro, Simon Althoff, Florian Eacock, Mark Schnietz, Karsten Guth, and Michael Brökelmann. “Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding.” In 15th Electronics Packaging Technology Conference, 2013. https://doi.org/10.1109/EPTC.2013.6745803.
LibreCat | DOI
 
[81]
2013 | Conference Paper | LibreCat-ID: 9801
Hunstig, Matthias, Waleed Al-Ashtari, Tobias Hemsel, and Walter Sextro. “Leistungs- Und Bandbreitensteigerung von Energy-Harvesting-Generatoren Für Energieautarke Systeme.” In 9. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Roman Dumitrescu, Franz Rammig, Wilhelm Schäfer, and Ansgar Trächtler, 359–72. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2013.
LibreCat
 
[80]
2013 | Conference Paper | LibreCat-ID: 9802
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation.” In Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, 16–18. Hannover, Germany, 2013.
LibreCat
 
[79]
2013 | Journal Article | LibreCat-ID: 9803
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Modelling the Friction Contact in an Inertia Motor.” Journal of Intelligent Material Systems and Structures 24, no. 11 (2013): 1380–91. https://doi.org/10.1177/1045389X12474354.
LibreCat | DOI
 
[78]
2013 | Journal Article | LibreCat-ID: 9804
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Stick-Slip and Slip-Slip Operation of Piezoelectric Inertia Drives - Part II: Frequency-Limited Excitation.” Sensors and Actuators A: Physical 200 (2013): 79–89. https://doi.org/10.1016/j.sna.2012.11.043.
LibreCat | DOI
 
[77]
2013 | Journal Article | LibreCat-ID: 9805
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Stick-Slip and Slip-Slip Operation of Piezoelectric Inertia Drives - Part I: Ideal Excitation.” Sensors and Actuators A: Physical 200 (2013): 90–100. https://doi.org/10.1016/j.sna.2012.11.012.
LibreCat | DOI
 
[76]
2013 | Journal Article | LibreCat-ID: 9807
Kimotho, James Kuria, Christopher Sondermann-Wölke, Tobias Meyer, and Walter Sextro. “Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization.” Chemical Engineering Transactions 33 (2013): 619–24. https://doi.org/10.3303/CET1333104.
LibreCat | DOI
 
[75]
2013 | Journal Article | LibreCat-ID: 9808
Kimotho, James Kuria, Chritoph Sondermann-Wölke, Tobias Meyer, and Walter Sextro. “Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation.” International Journal of Prognostics and Health Management 4, no. 2 (2013).
LibreCat
 
[74]
2013 | Conference Paper | LibreCat-ID: 9855
Kohl, Sergej, Armin Zuber, and Walter Sextro. “Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems.” In Proc. Appl. Math. Mech., 13:23–24, 2013. https://doi.org/10.1002/pamm.201310007.
LibreCat | DOI
 
[73]
2013 | Conference Paper | LibreCat-ID: 9858
Meyer, Tobias, Christina Hölscher, Michael Menke, Walter Sextro, and Detmar Zimmer. “Multiobjective Optimization Including Safety of Operation Applied to a Linear Drive System.” In Proc. Appl. Math. Mech., 13:483–84, 2013. https://doi.org/10.1002/pamm.201310234.
LibreCat | DOI
 
[72]
2013 | Conference Paper | LibreCat-ID: 9859
Meyer , Tobias, Jan Henning Keßler, Walter Sextro, and Ansgar Trächtler. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” In Proceedings of the Annual Reliability and Maintainability Symposium (RAMS). Orlando, FL, 2013. https://doi.org/10.1109/RAMS.2013.6517636.
LibreCat | DOI
 
[71]
2013 | Journal Article | LibreCat-ID: 9860
Meyer, Tobias, Christoph Sondermann-Wölke, James Kuria Kimotho, and Walter Sextro. “Controlling the Remaining Useful Lifetime Using Self-Optimization.” Chemical Engineering Transactions 33 (2013): 625–30. https://doi.org/10.3303/CET1333105.
LibreCat | DOI
 
[70]
2013 | Conference Paper | LibreCat-ID: 9861
Meyer, Tobias, Christoph Sondermann-Wölke, Walter Sextro, Martin Riedl, Alexander Gouberman, and Markus Siegle. “Bewertung Der Zuverlässigkeit Selbstoptimierender Systeme Mit Dem LARES-Framework.” In 9. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Roman Dumitrescu, Franz Rammig, Wilhelm Schäfer, and Ansgar Trächtler, 161–74. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2013.
LibreCat
 
[69]
2012 | Journal Article | LibreCat-ID: 9781
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Frequency Tuning of Piezoelectric Energy Harvesters by Magnetic Force.” Smart Materials and Structures 21, no. 3 (2012): 035019.
LibreCat
 
[68]
2012 | Journal Article | LibreCat-ID: 9782
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Analytical Determination of Characteristic Frequencies and Equivalent Circuit Parameters of a Piezoelectric Bimorph.” Journal of Intelligent Material Systems and Structures 23, no. 1 (2012): 15–23. https://doi.org/10.1177/1045389X11430742.
LibreCat | DOI
 
[67]
2012 | Conference Paper | LibreCat-ID: 9783
Bornmann, Peter, Tobias Hemsel, Walter Sextro, Takafumi Maeda, and Takeshi Morita. “Non-Perturbing Cavitation Detection / Monitoring in Sonochemical Reactors.” In Ultrasonics Symposium (IUS), 2012 IEEE International, 1141–44, 2012. https://doi.org/10.1109/ULTSYM.2012.0284.
LibreCat | DOI
 
[66]
2012 | Conference Paper | LibreCat-ID: 9787
Kohl, Sergej, Walter Sextro, and Armin Zuber. “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung Basierend Auf Einer Neuen Auslegungstheorie.” In 8. Tag Des Fahrwerks, Aachen, 2012, 38–60. Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen, 2012.
LibreCat
 
[65]
2012 | Conference Paper | LibreCat-ID: 9791
Sondermann-Wölke , Christoph, Tobias Meyer, Rafal Dorociak, Jürgen Gausemeier, and Walter Sextro. “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System Based on Its Principle Solution.” In Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012). Helsinki, Finland, 2012.
LibreCat
 
[64]
2012 | Journal Article | LibreCat-ID: 9806
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Analysis of Different Operation Modes for Inertia Motors.” ACTUATOR 2012 Conference Proceedings, 2012, 761–64.
LibreCat
 
[63]
2011 | Conference Paper | LibreCat-ID: 26981
Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In Technische Zuverlässigkeit –TTZ, 2011.
LibreCat
 
[62]
2011 | Conference Paper | LibreCat-ID: 23184
Lurye, Oleg, Christoph Sondermann-Wölke, Ivan Kromov, Walter Sextro, and Ansgar Trächtler. “Verlässlichkeitsanalyse Des Degradationsverhaltens Mechatronischer Systeme Mit Mehreren Betriebsstrategien.” In VDI Bericht Zur Tagung Technische Zuverlässigkeit. Leonberg: VDI-Verlag, 2011.
LibreCat
 
[61]
2011 | Conference Paper | LibreCat-ID: 23194
Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In Technische Zuverlässigkeit TTZ, 2011.
LibreCat
 
[60]
2011 | Conference Paper | LibreCat-ID: 9768
Lurie, Oleg, Ivan Kromov, Ansgar Trächtler, Christoph Sondermann-Wölke, and Walter Sextro. “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies.” In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 99–110. Leonberg, 2011.
LibreCat
 
[59]
2011 | Conference Paper | LibreCat-ID: 9771
Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 291–302. Leonberg, 2011.
LibreCat
 
[58]
2011 | Journal Article | LibreCat-ID: 9772
Tomberger, Christoph, Peter Dietmaier, Walter Sextro, and Klaus Six. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.” Wear 271 (2011): 2–12. https://doi.org/10.1016/j.wear.2010.10.025.
LibreCat | DOI
 
[57]
2011 | Patent | LibreCat-ID: 9790
Sextro, Walter, Matthias Hunstig, Peter Bornmann, and Tobias Hemsel. “Patent DE10201003395: Anordnung Und Verfahren Zur Mehrdimensionalen Messung von Schwingungen Eines Objekts. ,” 2011.
LibreCat
 
[56]
2010 | Journal Article | LibreCat-ID: 9747
Hölzl, Johannes Sebastian, and Walter Sextro. “Reibungsdämpfung in Ausgedehnten, Verschraubten Fügestellen.” PAMM 10, no. 1 (2010): 247–48. https://doi.org/10.1002/pamm.201010116.
LibreCat | DOI
 
[55]
2010 | Journal Article | LibreCat-ID: 9748
Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.” SAE International Journal of Passenger Cars- Mechanical Systems, 2010, 929–35. https://doi.org/10.4271/2010-01-1422.
LibreCat | DOI
 
[54]
2010 | Conference Paper | LibreCat-ID: 9753
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Anregungskonzepte Und Modellierung Piezoelektrischer Trägheitsmotoren.” In 7. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Franz Rammig, Wilhelm Schäfer, and Ansgar Trächtler, 272:129–41. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2010.
LibreCat
 
[53]
2010 | Conference Paper | LibreCat-ID: 9754
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Improving the Performance of Piezoelectric Inertia Motors.” In ACTUATOR 2010 Conference Proceedings, 657–61, 2010.
LibreCat
 
[52]
2010 | Conference Paper | LibreCat-ID: 9760
Sondermann-Wölke, Christoph, Tobias Hemsel, Walter Sextro, Jürgen Gausemeier, and Sebastian Pook. “Guideline for the Dependability-Oriented Design of Self-Optimizing Systems.” In Industrial Informatics (INDIN), 2010 8th IEEE International Conference On, 739–44, 2010. https://doi.org/10.1109/INDIN.2010.5549490.
LibreCat | DOI
 
[51]
2010 | Journal Article | LibreCat-ID: 9761
Sondermann-Wölke, Christoph, and Walter Sextro. “Integration of Condition Monitoring in Self-Optimizing Function Modules Applied to the Active Railway Guidance Module.” International Journal On Advances in Intelligent Systems 3, no. 1–3 (2010): 65–74.
LibreCat
 
[50]
2010 | Conference Paper | LibreCat-ID: 9762
Sondermann-Wölke, Christoph, Walter Sextro, Jens Geisler, and Ansgar Trächtler. “Experimentelle Untersuchung Der Selbstoptimierung Innerhalb Des RailCab-Spurführungsmoduls.” In Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Frans Josef Rammig, and Ansgar Trächtler, 272:411–20. HNI-Verlagsschriftenreihe. Paderborn, 2010.
LibreCat
 
[49]
2010 | Conference Paper | LibreCat-ID: 9763
Sondermann-Wölke, Christoph, Jens Geisler, and Walter Sextro. “Increasing the Reliability of a Self-Optimizing Railway Guidance System.” In Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 1–6, 2010. https://doi.org/10.1109/RAMS.2010.5448080.
LibreCat | DOI
 
[48]
2010 | Journal Article | LibreCat-ID: 9764
Tomberger, Christoph, Peter Dietmaier, Rosenberger Martin, Walter Sextro, and Klaus Six. “Einfluss von Oberflächenrauheit, Fluiden Zwischenschichten Und Kontakttemperaturen Auf Den Kraftschluss Zwischen Rad Und Schiene.” ZEVrail 134 (2010): 127–35.
LibreCat
 
[47]
2009 | Conference Paper | LibreCat-ID: 9742
Sondermann-Wölke, Christoph, and Walter Sextro. “Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules.” In Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:, 15–20, 2009. https://doi.org/10.1109/ComputationWorld.2009.47.
LibreCat | DOI
 
[46]
2007 | Conference Paper | LibreCat-ID: 9560
Tonchev, Anton, Wolfgang Hirschberg, Walter Sextro, Zoltan Major, and Josef Neges. “Modellierung Der Hysterese- Und Adhäsionseffekte Zwischen Bremsbelag Und Bremsscheibe.” In 27. Internationales Mju-Symposium/Bremsen-Fachtagung, 29–49. 12. Bad Neuenahr: VDI Verlag GmbH, 2007.
LibreCat
 
[45]
2007 | Conference Paper | LibreCat-ID: 9561
Tonchev, Anton, Wolfgang Hirschberg, Walter Sextro, Zoltan Major, and Josef Neges. “Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc.” In 27. Internationales Mju-Symposium/Bremsen-Fachtagung, 144–63. 12. Bad Neuenahr: VDI Verlag GmbH, 2007.
LibreCat
 
[44]
2007 | Conference Paper | LibreCat-ID: 9563
Genzo, Alexander, Walter Sextro, and Lars Panning. “Schwingungsverhalten Elastischer Körper Mit Nichtlinearen Kopplungen in Ausgedehnten Reibkontakten.” In VDI-Berichte, 2022:147–61. Düsseldorf: VDI Verlag GmbH, 2007.
LibreCat
 
[43]
2007 | Journal Article | LibreCat-ID: 9567
Szwedowicz, J, R Visser, Walter Sextro, and P. A Masserey. “On Nonlinear Forced Vibration of Shrouded Turbine Blades.” Journal of Turbomachinery 130, no. 1 (2007): 011002–011002.
LibreCat
 
[42]
2006 | Conference Paper | LibreCat-ID: 9535
Genzo, Alexander, and Walter Sextro. “Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts.” In Proceedings of ISMA - International Conference on Noise and Vibration Engineering, 51–52, 2006.
LibreCat
 
[41]
2006 | Book Chapter | LibreCat-ID: 9536
Gutzeit, F, Walter Sextro, and Matthias Kröger. “Unsteady Rolling Contact of Rubber Wheels.” In Analysis and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst, 27:261–70. Lecture Notes in Applied and Computational Mechanics. Springer Berlin Heidelberg, 2006. https://doi.org/10.1007/3-540-31761-9_29.
LibreCat | DOI
 
[40]
2006 | Conference Paper | LibreCat-ID: 9542
Hofmeisterro, Adolf, Walter Sextro, and Otto Röschel. “Error-Workspace Analysis of Plane Mechanisms.” In Proceedings of EUCOMES, the First European Conference on Mechanism Science, 1–12. Obergurgl, {\"O}sterreich, 2006.
LibreCat
 
[39]
2006 | Book Chapter | LibreCat-ID: 9551
Sextro, Walter, Patrick Moldenhauer, M Wangenheim, Markus Lindner, and Matthias Kröger. “Contact Behaviour of a Sliding Rubber Element.” In Analysis and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst, 27:243–52. Lecture Notes in Applied and Computational Mechanics. Springer Berlin Heidelberg, 2006. https://doi.org/10.1007/3-540-31761-9_27.
LibreCat | DOI
 
[38]
2005 | Journal Article | LibreCat-ID: 9266
Genzo, Alexander, Walter Sextro, and Karl Popp. “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM 5, no. 1 (2005): 91–92. https://doi.org/10.1002/pamm.200510026.
LibreCat | DOI
 
[37]
2005 | Journal Article | LibreCat-ID: 9526
Genzo, Alexander, Walter Sextro, and Karl Popp. “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM 5, no. 1 (2005): 91–92. https://doi.org/10.1002/pamm.200510026.
LibreCat | DOI
 
[36]
2005 | Journal Article | LibreCat-ID: 9529
Hofmeister, Adolf, Walter Sextro, and Otto Röschel. “Unkontrollierbare Bewegungen Ebener Mechanismen Mit Gelenkspiel.” PAMM 5, no. 1 (2005): 201–2. https://doi.org/10.1002/pamm.200510078.
LibreCat | DOI
 
[35]
2004 | Conference Paper | LibreCat-ID: 8952
Götting, Florian, Walter Sextro, Lars Panning, and Karl Popp. “Systematic Mistuning of Bladed Disk Assemblies with Friction Contacts.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 6:257–67, 2004.
LibreCat
 
[34]
2004 | Journal Article | LibreCat-ID: 9520
Lindner, Markus, Walter Sextro, and Karl Popp. “Hysteretic Friction of a Sliding Rubber Element.” PAMM 4, no. 1 (2004): 101–2. https://doi.org/10.1002/pamm.200410032.
LibreCat | DOI
 
[33]
2004 | Conference Paper | LibreCat-ID: 9523
Panning, Lars, Karl Popp, Walter Sextro, and Florian Götting. “Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 6:269–80. Vienna, Austria, 2004. https://doi.org/10.1115/GT2004-53316.
LibreCat | DOI
 
[32]
2003 | Conference Paper | LibreCat-ID: 8933
Götting, Florian, Walter Sextro, Lars Panning, and Karl Popp. “Schwingungsverhalten von Verstimmten Beschaufelungen Mit Reibelementen.” In Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Darmstadt, edited by H Irretier , R Nordmann, and H Springer, 201–10. Vieweg-Verlag, 2003.
LibreCat
 
[31]
2003 | Journal Article | LibreCat-ID: 8934
Genzo, Alexander, Walter Sextro, and Karl Popp. “Erzwungene Schwingungen von Elastischen Mehrkörpersystemen Mit Reibkontakten.” PAMM 2, no. 1 (2003): 120–21. https://doi.org/10.1002/pamm.200310046.
LibreCat | DOI
 
[30]
2003 | Journal Article | LibreCat-ID: 8937
Panning, Lars, Walter Sextro, and Karl Popp. “Design of Friction Dampers for Mistuned Bladed Disks.” PAMM 3, no. 1 (2003): 118–19. https://doi.org/10.1002/pamm.200310336.
LibreCat | DOI
 
[29]
2003 | Journal Article | LibreCat-ID: 8938
Panning, Lars, Walter Sextro, and Karl Popp. “Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers.” International Journal of Rotating Machinery 9, no. 3 (2003): 219–28.
LibreCat
 
[28]
2003 | Journal Article | LibreCat-ID: 8939
Popp, Karl, Lars Panning, and Walter Sextro. “Vibration Damping by Friction Forces -Theory and Applications.” Journal of Vibration and Control 9 (2003): 419–48.
LibreCat
 
[27]
2003 | Conference Paper | LibreCat-ID: 8940
Sextro, Walter, and Karl Popp. “Optimierung Des Schwingungsverhaltens Elastischer Strukturen Mit Reibfugen Am Beispiel von Turbomaschinenschaufeln.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW), 40. Frankfurt am Main, Germany, 2003.
LibreCat
 
[26]
2003 | Conference Paper | LibreCat-ID: 8941
Szwedowicz, J, Walter Sextro, R Visser, and P.A Masserey. “On Forced Vibration of Shrouded Turbine Blades.” In ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference. Atlanta, Georgia, USA, 2003. https://doi.org/doi:10.1115/GT2003-38808.
LibreCat | DOI
 
[25]
2002 | Conference Paper | LibreCat-ID: 8928
Panning, Lars, Walter Sextro, and Karl Popp. “Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction Damping.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande, 2002.
LibreCat
 
[24]
2002 | Conference Paper | LibreCat-ID: 8929
Panning, Lars, Walter Sextro, and Karl Popp. “Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers.” In Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC. Honolulu, Hawaii, USA, 2002.
LibreCat
 
[23]
2002 | Conference Paper | LibreCat-ID: 8931
Sextro, Walter, Lars Panning, and Florian Götting. “Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande, 2002.
LibreCat
 
[22]
2002 | Conference Paper | LibreCat-ID: 8932
Sextro, Walter, and Karl Popp. “Optimierung Des Schwingungsverhaltens Elastischer Strukturen Mit Reibfugen.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, 157–83. Frankfurt am Main, Germany, 2002.
LibreCat
 
[21]
2001 | Conference Paper | LibreCat-ID: 8921
Panning, Lars, Walter Sextro, and Karl Popp. “Schwingungsanalyse Verstimmter Schaufelkränze Mit Reibelementen.” In Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Wien, edited by H Irretier, R Nordmann, and H Springer, 297–306. Vieweg-Verlag, 2001.
LibreCat
 
[20]
2001 | Journal Article | LibreCat-ID: 8922
Sextro, Walter. “Heat and Wear Generation for Rolling Contacts.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 81 (2001): 225–26.
LibreCat
 
[19]
2001 | Conference Paper | LibreCat-ID: 8923
Sextro, Walter. “Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction.” In ASME Design Engineering Technical Conferences, 1–12. Pittsburgh, Pennsylvania, USA, 2001.
LibreCat
 
[18]
2001 | Journal Article | LibreCat-ID: 8924
Sextro, Walter, Karl Popp, and Tomasz Krzyzynski. “Localization in Nonlinear Mistuned Systems with Cyclic Symmetry.” Nonlinear Dynamics 25, no. 1–3 (2001): 207–20. https://doi.org/10.1023/A:1012915002568.
LibreCat | DOI
 
[17]
2000 | Journal Article | LibreCat-ID: 8918
Krzyzynski, Tomasz, Karl Popp, and Walter Sextro. “On Some Regularities in Dynamic Response of Cyclic Periodic Structures.” Chaos, Solitons \& Fractals 11, no. 10 (2000): 1597–1609. https://doi.org/10.1016/S0960-0779(99)00080-6.
LibreCat | DOI
 
[16]
2000 | Conference Paper | LibreCat-ID: 8919
Panning, Lars, Walter Sextro, and Karl Popp. “Optimization of Interblade Friction Damper.” In International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 1–8. Munich, Germany, 2000.
LibreCat
 
[15]
2000 | Conference Paper | LibreCat-ID: 8920
Sextro, Walter. “The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification.” In International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 1–8. Munich, Germany, 2000.
LibreCat
 
[14]
1999 | Conference Paper | LibreCat-ID: 8909
Popp, Karl, and Walter Sextro. “Schwingungsanalyse von Vorgespannten Schaufeln Mit Deckplatten Im Schaufelkranz.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, 21–38. Heidelberg, 1999.
LibreCat
 
[13]
1999 | Conference Paper | LibreCat-ID: 8910
Sextro, Walter. “Experimental Verification of a Non-Hertzian Contact Model.” In International Conference on Computational Methods in Contact Mechanics, 181–90, 1999.
LibreCat
 
[12]
1999 | Conference Paper | LibreCat-ID: 8911
Sextro, Walter. “Forced Vibration of Elastic Structures with Friction Contacts.” In ASME Design Engineering Technical Conferences, 1–10. Las Vegas, Nevada, USA, 1999.
LibreCat
 
[11]
1999 | Journal Article | LibreCat-ID: 8912
Sextro, Walter, and Karl Popp. “Ein Ebenes Reibkontaktmodell Zur Berechnung von Schaufelschwingungen Mit Reibelementen.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 79 (1999): 311–12.
LibreCat
 
[10]
1999 | Conference Paper | LibreCat-ID: 8913
Sextro, Walter, and Karl Popp. “Schwingungsanalyse von Vorgespannten Schaufeln Mit Deckplatten Im Schaufelkranz.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW), 56. Frankfurt am Main, Germany, 1999.
LibreCat
 
[9]
1998 | Conference Paper | LibreCat-ID: 8907
Sextro, Walter, Karl Popp, and I Wolter. “Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers.” In International Congress on Combustion Engines, Proceedings of the 22nd CIMAC, 1:257–70. Kopenhagen, D{\"a}nemark, 1998.
LibreCat
 
[8]
1998 | Conference Paper | LibreCat-ID: 8908
Sextro, Walter, Karl Popp, and I Wolter. “Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers.” In The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7, B:621–30. Honolulu, Hawaii, USA, 1998.
LibreCat
 
[7]
1997 | Conference Paper | LibreCat-ID: 8902
Popp, Karl, and Walter Sextro. “Schwingungsverhalten von Verstimmten Beschaufelungen Mit Reibelementen.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, 131–42. Frankfurt am Main, Germany, 1997.
LibreCat
 
[6]
1997 | Conference Paper | LibreCat-ID: 8903
Sextro, Walter. “Schwingungsverhalten von Schaufelkränzen Mit Reibelementen Bei Frequenzverstimmung.” In VDI-Reihe, Vol. 11. VDI-Verlag, Düsseldorf, 1997.
LibreCat
 
[5]
1997 | Conference Paper | LibreCat-ID: 8904
Sextro, Walter, Karl Popp, and Ivo Wolter. “Improved Reliability of Bladed Disks Due to Friction Dampers.” In The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition, 1997.
LibreCat
 
[4]
1996 | Conference Paper | LibreCat-ID: 8896
Popp, Karl, and Walter Sextro. “Schwingungsverhalten Eines Schaufelkranzes Mit Reibelementen Bei Frequenzverstimmung.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, 53–76. Frankfurt am Main, Germany, 1996.
LibreCat
 
[3]
1996 | Conference Paper | LibreCat-ID: 8897
Popp, Karl, and Walter Sextro. “Dynamical Behaviour of a Bladed Disk with Friction Dampers.” In The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH, 1:157–83. Prag, 1996.
LibreCat
 
[2]
1993 | Journal Article | LibreCat-ID: 8895
Sextro, Walter, and B Schmalhorst. “Static Behaviour of Drill Strings in Curved Boreholes.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 73 (1993): 255–57.
LibreCat
 
[1]
1991 | Book Chapter | LibreCat-ID: 8894
Stelter, Peter, and Walter Sextro. “Bifurcations in Dynamic Systems with Dry Friction.” In Bifurcation and Chaos: Analysis, Algorithms, Applications, edited by R. Seydel, F.W. Schneider, T. Küpper, and H. Troger, 97:343–47. International Series of Numerical Mathematics / Internationale Schriftenreihe Zur Numerischen Mathematik / S{\’e}rie Internationale d’Analyse Num{\’e}rique. Birkhäuser Basel, 1991. https://doi.org/10.1007/978-3-0348-7004-7_44.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: Chicago

Export / Embed

198 Publications

Mark all

[198]
2024 | Journal Article | LibreCat-ID: 51518
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, Tobias Hemsel, and Walter Sextro. “Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions.” Electronics 13, no. 3 (2024). https://doi.org/10.3390/electronics13030521.
LibreCat | DOI
 
[197]
2023 | Conference Paper | LibreCat-ID: 46813 | OA
Wohlleben, Meike Claudia, Lars Muth, Sebastian Peitz, and Walter Sextro. “Transferability of a Discrepancy Model for the Dynamics of Electromagnetic Oscillating Circuits.” In Proceedings in Applied Mathematics and Mechanics. Wiley, 2023. https://doi.org/10.1002/pamm.202300039.
LibreCat | DOI | Download (ext.)
 
[196]
2023 | Conference Paper | LibreCat-ID: 47116 | OA
Aimiyekagbon, Osarenren Kennedy, Alexander Löwen, Amelie Bender, Lars Muth, and Walter Sextro. “Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System.” In Proceedings of the Asia Pacific Conference of the PHM Society 2023 , Vol. 4, 2023. https://doi.org/10.36001/phmap.2023.v4i1.3596.
LibreCat | DOI | Download (ext.)
 
[195]
2023 | Conference Abstract | LibreCat-ID: 51117
Scheidemann, Claus, Tobias Hemsel, Olga Friesen, Leander Claes, and Walter Sextro. “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” 2023.
LibreCat
 
[194]
2023 | Conference Abstract | LibreCat-ID: 51118
Scheidemann, Claus, Tobias Hemsel, Olga Friesen, Leander Claes, and Walter Sextro. “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” 2023.
LibreCat
 
[193]
2023 | Conference Abstract | LibreCat-ID: 51119
Scheidemann, Claus, Oliver Ernst Caspar Hagedorn, Tobias Hemsel, and Walter Sextro. “Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process,” 2023.
LibreCat
 
[192]
2023 | Book Chapter | LibreCat-ID: 51338
Schütte, Jan, and Walter Sextro. “Einfluss der Radhubkinematik auf den Reifenverschleiß.” In 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, 2425:165–80. VDI-Berichte. VDI Verlag GmbH, 2023.
LibreCat
 
[191]
2022 | Conference Paper | LibreCat-ID: 29934
Muth, Lars, Christian Noll, and Walter Sextro. “Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data.” In Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021, edited by Anna Orlova and David Cole. Lecture Notes in Mechanical Engineering. Cham: Springer, 2022. https://doi.org/10.1007/978-3-031-07305-2_92.
LibreCat | DOI | Download (ext.)
 
[190]
2022 | Book Chapter | LibreCat-ID: 29727
Wohlleben, Meike Claudia, Amelie Bender, Sebastian Peitz, and Walter Sextro. “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction.” In Machine Learning, Optimization, and Data Science. Cham: Springer International Publishing, 2022. https://doi.org/10.1007/978-3-030-95470-3_8.
LibreCat | DOI | Download (ext.)
 
[189]
2022 | Conference Paper | LibreCat-ID: 30371
Hagedorn, Oliver Ernst Caspar, Marian Broll, Olaf Kirsch, Tobias Hemsel, and Walter Sextro. “Experimental Investigation of the Influence of Different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding.” In CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, 138–43. Berlin: VDE VERLAG GMBH, 2022.
LibreCat
 
[188]
2022 | Newspaper Article | LibreCat-ID: 47159
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, and Walter Sextro. “On the Applicability of Time Series Features as Health Indicators for Technical Systems Operating under Varying Conditions.” Condition Monitor, 2022.
LibreCat
 
[187]
2022 | Conference Paper | LibreCat-ID: 34104
Scheidemann, Claus, Olaf Kirsch, Tobias Hemsel, and Walter Sextro. “Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding.” In 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). IEEE, 2022. https://doi.org/10.1109/estc55720.2022.9939478.
LibreCat | DOI
 
[186]
2022 | Patent | LibreCat-ID: 9980
Reinke, Kai, Amelie Bender, Tobias Meyer, Walter Sextro, and James Kuria Kimotho. “Patent DE 10 2017 000 926 B4: Gerät Mit Wenigstens Einem Elastisch Verformbaren Bauteil, Insbesondere Einem Gummi-Metall-Lager Und Mit Einer Einrichtung Zur Feststellung Des Beginns Einer Verschleißbedingten Bauteil-Restnutzungsdauer, Sowie Verfahren Zur Bestimmung Der Bauteil-Restnutzungsdauer.,” 2022.
LibreCat | Files available
 
[185]
2022 | Report | LibreCat-ID: 52045
Scheidemann, Claus, Tobias Hemsel, and Walter Sextro. Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022. https://doi.org/10.2314/KXP:1879655276.
LibreCat | Files available | DOI
 
[184]
2021 | Conference Paper | LibreCat-ID: 27652
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, and Walter Sextro. “Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten .” In VDI-Berichte 2391, 197–210. Düsseldorf: VDI Verlag GmbH, 2021.
LibreCat
 
[183]
2021 | Journal Article | LibreCat-ID: 21436
Schemmel, Reinhard, Viktor Krieger, Tobias Hemsel, and Walter Sextro. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.” Microelectronics Reliability 119 (2021): 114077. https://doi.org/10.1016/j.microrel.2021.114077.
LibreCat | DOI
 
[182]
2021 | Conference Paper | LibreCat-ID: 22724 | OA
Bender, Amelie, and Walter Sextro. “Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties.” In Proceedings of the European Conference of the PHM Society 2021, edited by Phuc Do, Steve King, and Olga Fink, Vol. 6, 2021. https://doi.org/10.36001/phme.2021.v6i1.2843 .
LibreCat | DOI | Download (ext.)
 
[181]
2021 | Conference Paper | LibreCat-ID: 22507 | OA
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, and Walter Sextro. “On the Applicability of Time Series Features as Health Indicators for Technical Systems Operating under Varying Conditions.” In Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021), n.d.
LibreCat | Files available
 
[180]
2021 | Conference Paper | LibreCat-ID: 27111 | OA
Aimiyekagbon, Osarenren Kennedy, Lars Muth, Meike Claudia Wohlleben, Amelie Bender, and Walter Sextro. “Rule-Based Diagnostics of a Production Line.” In Proceedings of the European Conference of the PHM Society 2021, edited by Phuc Do, Steve King, and Olga Fink, 6:527–36, 2021. https://doi.org/10.36001/phme.2021.v6i1.3042.
LibreCat | DOI | Download (ext.)
 
[179]
2021 | Journal Article | LibreCat-ID: 27508 | OA
Schütte, Jan, and Walter Sextro. “Tire Wear Reduction Based on an Extended Multibody Rear Axle Model.” Vehicles, 2021, 233–56. https://doi.org/10.3390/vehicles3020015.
LibreCat | DOI | Download (ext.)
 
[178]
2021 | Journal Article | LibreCat-ID: 29293 | OA
Martin, Sven, Jan Schütte, C. Bäumler, Walter Sextro, and Thomas Tröster. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics 6 (2021). https://doi.org/10.1016/j.finmec.2021.100065.
LibreCat | DOI | Download (ext.)
 
[177]
2020 | Conference Paper | LibreCat-ID: 17355
Schemmel, Reinhard, Claus Scheidemann, Tobias Hemsel, Olaf Kirsch, and Walter Sextro. “Experimental Analysis and Modelling of Bond Formation in Ultrasonic Heavy Wire Bonding.” In CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 1–6, 2020.
LibreCat
 
[176]
2020 | Book | LibreCat-ID: 9857
Magnus, Kurt, Karl Popp, and Walter Sextro. Schwingungen. Springer Vieweg Wiesbaden, 2020. https://doi.org/10.1007/978-3-658-31116-2.
LibreCat | DOI
 
[175]
2020 | Conference Paper | LibreCat-ID: 17706
Schemmel, Reinhard, Viktor Krieger, Tobias Hemsel, and Walter Sextro. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.” In 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2020. https://doi.org/10.1109/eurosime48426.2020.9152679.
LibreCat | DOI
 
[174]
2020 | Conference Paper | LibreCat-ID: 17810
Aimiyekagbon, Osarenren Kennedy, Amelie Bender, and Walter Sextro. “Evaluation of Time Series Forecasting Approaches for the Reliable Crack Length Prediction of Riveted Aluminium Plates given Insufficient Data.” In PHM Society European Conference, Vol. 5, 2020.
LibreCat
 
[173]
2020 | Book Chapter | LibreCat-ID: 22007
Schütte, Jan, and Walter Sextro. “Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear.” In Lecture Notes in Mechanical Engineering. Cham, 2020. https://doi.org/10.1007/978-3-030-38077-9_201.
LibreCat | DOI
 
[172]
2020 | Patent | LibreCat-ID: 9981
Reinke, Kai, Amelie Bender, Tobias Meyer, Walter Sextro, and James Kuria Kimotho. “Patent EP 3 358 332 B1: Verfahren Zur Bestimmung Des Beginns Einer Verschleißbedingten Bauteil-Restnutzungsdauer Eines Elastisch Verformbaren Bauteils, Als Strukturteil Und/Oder Lagerteil Eines Geräts.,” 2020.
LibreCat | Files available
 
[171]
2019 | Conference Paper | LibreCat-ID: 23716
Kaul, Thorben, Julian Hentze, Walter Sextro, and Iris Gräßler. “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung.” In Fachtagung Mechatronik 2019 Paderborn, edited by Torsten Bertram, Burkhard Corves, Iris Gräßler, and Klaus Janschek, 19–24, 2019.
LibreCat
 
[170]
2019 | Conference Paper | LibreCat-ID: 15475
Schütte, Jan, Walter Sextro, and Sergej Kohl. “Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen.” In Fachtagung Mechatronik 2019. Paderborn: Universitätsbibliothek Paderborn, 2019, 2019. https://doi.org/10.17619/UNIPB/1-777.
LibreCat | DOI
 
[169]
2019 | Conference Paper | LibreCat-ID: 14852
Dunst, Paul, Peter Bornmann, Tobias Hemsel, Walter Littmann, and Walter Sextro. “Atomization of Fluids with Ultrasound.” In Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019), edited by Joost Lötters and Gerald Urban, 140–43. Enschede, The Netherlands, 2019.
LibreCat | Files available
 
[168]
2019 | Conference Paper | LibreCat-ID: 15244
Hagedorn, Oliver Ernst Caspar, Daniel Pielsticker, Tobias Hemsel, and Walter Sextro. “Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen.” In 2. VDI-Fachtagung Schwingungen 2019. VDI Verlag GmbH · Düsseldorf 2019, 2019.
LibreCat
 
[167]
2019 | Book | LibreCat-ID: 10002
Sextro, Walter, and Michael Brökelmann. Intelligente Herstellung Zuverlässiger Kupferbondverbindungen. Vol. VIII. Springer Verlag, 2019. https://doi.org/10.1007/978-3-662-55146-2.
LibreCat | DOI
 
[166]
2019 | Conference Paper | LibreCat-ID: 10255
Bender, Amelie, Kai Reinke, and Walter Sextro. “Konstruktion Und Zustandsüberwachung Eines Gummi-Metall-Teils Mit Integriertem Thermoelement.” In 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, VDI-Berichte 2346:241–48. Bremen 2019, 2019.
LibreCat
 
[165]
2019 | Conference Paper | LibreCat-ID: 10257
Kaul, Thorben, Julian Hentze, Walter Sextro, and Iris Gräßler. “Integration von Verlässlichkeitsmodellen Der Entwicklung in Einen Digitalen Zwilling Zur Umsetzung Einer Vorausschauenden Instandhaltung.” In Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
 
[164]
2019 | Conference Paper | LibreCat-ID: 10258
Dunst, Paul, Tobias Hemsel, Peter Bornmann, Walter Littmann, and Walter Sextro. “Modellbasierte Und Experimentelle Charakterisierung von Intensiven Ultraschall-Stehwellenfeldern Für Die Zerstäubung Hochviskoser Flüssigkeiten.” In DAGA 2019, 2019.
LibreCat
 
[163]
2019 | Journal Article | LibreCat-ID: 10334
Schemmel, Reinhard, Tobias Hemsel, Collin Dymel, Matthias Hunstig, Michael Brökelmann, and Walter Sextro. “Using Complex Multi-Dimensional Vibration Trajectories in Ultrasonic Bonding and Welding.” Sensors and Actuators A: Physical 295 (2019): 653–62. https://doi.org/10.1016/j.sna.2019.04.025.
LibreCat | DOI
 
[162]
2019 | Conference Paper | LibreCat-ID: 13460 | OA
Bender, Amelie, Lennart Schinke, and Walter Sextro. “Remaining Useful Lifetime Prediction Based on Adaptive Failure Thresholds.” In Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), edited by Michael Beer and Enrico Zio, 1262–69, 2019.
LibreCat | Download (ext.)
 
[161]
2019 | Conference Paper | LibreCat-ID: 13461 | OA
Kaul, Thorben, Amelie Bender, and Walter Sextro. “Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems.” In Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), edited by Michael Beer and Enrico Zio, 2340–47, 2019.
LibreCat | Download (ext.)
 
[160]
2018 | Conference Paper | LibreCat-ID: 9987
Bender, Amelie, and Walter Sextro. “A Particle Filtering Approach for Temperature Based Prognostics.” In Safety and Reliability – Safe Societies in a Changing World, 1025–33. Trondheim, Norway, 2018.
LibreCat
 
[159]
2018 | Journal Article | LibreCat-ID: 9990
Dunst, Paul, Peter Bornmann, Tobias Hemsel, Walter. Littmann, and Walter Sextro. “Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders.” ACTUATOR 2018; 16th International Conference on New Actuators, 2018, 142–45.
LibreCat
 
[158]
2018 | Journal Article | LibreCat-ID: 9991
Dunst, Paul, Peter Bornmann, Tobias Hemsel, and Walter Sextro. “Vibration-Assisted Handling of Dry Fine Powders.” Actuators 2018, 7(2)., 2018, 1–11. https://doi.org/10.3390/act7020018.
LibreCat | DOI
 
[157]
2018 | Conference Paper | LibreCat-ID: 9992
Dymel, Collin, Paul Eichwald, Reinhard Schemmel, Tobias Hemsel, Michael Brökelmann, Matthias Hunstig, and Walter Sextro. “Numerical and Statistical Investigation of Weld Formation in a Novel Two-Dimensional Copper-Copper Bonding Process.” In (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 1–6, 2018.
LibreCat
 
[156]
2018 | Conference Paper | LibreCat-ID: 9993
Dymel, Collin, Reinhard Schemmel, Tobias Hemsel, Walter Sextro, Michael Brökelmann, and Matthias Hunstig. “Experimental Investigations on the Impact of Bond Process Parameters in Two-Dimensional Ultrasonic Copper Bonding.” In (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 41–44, 2018.
LibreCat
 
[155]
2018 | Book | LibreCat-ID: 9995
Meyer, Tobias, Thorben Kaul, James Kuria Kimotho, and Walter Sextro. Steigerung Der Intelligenz Mechatronischer Systeme. Vol. Steigerung der Verlässlichkeit technischer Systeme. Springer Nature Switzerland AG. Part of Springer Nature., 2018.
LibreCat
 
[154]
2018 | Conference Paper | LibreCat-ID: 9997
Schemmel, Reinhard, Simon Althoff, Walter Sextro, Andreas Unger, Michael Brökelmann, and Matthias Hunstig. “Effects of Different Working Frequencies on the Joint Formation in Copper Wire Bonding.” In CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018), 230–35. Stuttgart, Germany, 2018.
LibreCat
 
[153]
2018 | Conference Paper | LibreCat-ID: 9998
Schemmel, Reinhard, Tobias Hemsel, and Walter Sextro. “Numerical and Experimental Investigations in Ultrasonic Heavy Wire Bonding.” In 6th European Conference on Computational Mechanics (ECCM 6), 1–12. Glasgow, UK, 2018.
LibreCat
 
[152]
2018 | Conference Paper | LibreCat-ID: 9999
Unger, Andreas, Matthias Hunstig, Tobias Meyer, Michael Brökelmann, and Walter Sextro. “Intelligent Production of Wire Bonds Using Multi-Objective Optimization – Insights, Opportunities and Challenges.” In In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, Vol. Vol. 2018, No. 1, pp. 000572-000577., 2018. https://doi.org/10.4071/2380-4505-2018.1.000572.
LibreCat | DOI
 
[151]
2017 | Conference Paper | LibreCat-ID: 23560
Hentze, Julian, Thorben Kaul, Iris Gräßler, and Walter Sextro. “Integrated Modeling of Behavior and Reliability in System Development.” In ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB, edited by Anja Maier, Stanko Skec, Chris McKesson, and Mike Van der Loos, 385–94. Design Society, 2017.
LibreCat
 
[150]
2017 | Conference Paper | LibreCat-ID: 9969
Bender, Amelie, Thorben Kaul, and Walter Sextro. “Entwicklung Eines Condition Monitoring Systems Für Gummi-Metall-Elemente.” In Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, 347–58. Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, 2017.
LibreCat
 
[149]
2017 | Conference Paper | LibreCat-ID: 9970
Bender, Amelie, James Kuria Kimotho, Sergej Kohl, Walter Sextro, and Kai Reinke. “Modellbasierte Prognose Der Nutzbaren Restlebensdauer von Gummi-Metall-Elementen.” In 15. Internationale Schienenfahrzeugtagung, 123–25, 2017.
LibreCat
 
[148]
2017 | Conference Paper | LibreCat-ID: 9971
Bender, Amelie, Walter Sextro, and Kai Reinke. “Neuartiges Konzept Zur Lebensdauerprognose von Gummi-Metall-Elementen.” In VDI-Berichte 2301, 49–60, 2017.
LibreCat
 
[147]
2017 | Journal Article | LibreCat-ID: 9972
Dunst, Paul, Tobias Hemsel, and Walter Sextro. “Analysis of Pipe Vibration in an Ultrasonic Powder Transportationsystem.” Elsevier Sensors and Actuators A 263 (2017): 733–36.
LibreCat
 
[146]
2017 | Journal Article | LibreCat-ID: 9973
Eichwald, Paul, Simon Althoff, Reinhard Schemmel, Walter Sextro, Andreas Unger, Michael Brökelmann, and Matthias Hunstig. “Multi-Dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design.” IMAPSource Vol. 2017, No. 1 (2017).
LibreCat
 
[145]
2017 | Conference Paper | LibreCat-ID: 9974
Hentze, Julian, Thorben Kaul, Iris Grässler, and Walter Sextro. “Integrated Modeling Og Behavior and Reliability in System Development.” In ICED17, 21st International Conference on Enginieering Design, 385–94, 2017.
LibreCat
 
[144]
2017 | Journal Article | LibreCat-ID: 9976
Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Formulation of Reliability-Related Objective Functions for Design of Intelligent Mechatronic Systems.” SAGE Journals Vol. 231(4) (2017): 390–99. https://doi.org/10.1177/1748006X17709376.
LibreCat | DOI
 
[143]
2017 | Conference Paper | LibreCat-ID: 9978
Kimotho, James Kuria, Walter Sextro, and Tobias Hemsel. “Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing.” In IEEE Transactions on Reliability, 1–10, 2017. https://doi.org/10.1109/TR.2017.2710260.
LibreCat | DOI
 
[142]
2017 | Conference Paper | LibreCat-ID: 9982
Schemmel, Reinhard, Tobias Hemsel, and Walter Sextro. “MoRFUS: Mobile Reinigungseinheit Für Förderketten Basierend Auf Ultraschall.” In 43. Deutsche Jahrestagung Für Akustik, 611–14. Kiel 2017, 2017.
LibreCat
 
[141]
2017 | Conference Paper | LibreCat-ID: 9983
Schulze, Sebastian, Walter Sextro, and K. Kister. “Model Based Optimization of Dynamics in Adaptive Headlamps.” In Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
 
[140]
2017 | Conference Paper | LibreCat-ID: 9985
Sextro, Walter, Tobias Meyer, Thorben Kaul, and James Kuria Kimotho. “Entwicklung Verlässlicher, Intelligenter Systeme.” In VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte., 17–30. Leonberg, 2017.
LibreCat
 
[139]
2016 | Conference Paper | LibreCat-ID: 9955
Althoff, Simon, Tobias Meyer, Andreas Unger, Walter Sextro, and Florian Eacock. “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools.” In IEEE 66th Electronic Components and Technology Conference, 2103–10, 2016. https://doi.org/10.1109/ECTC.2016.234.
LibreCat | DOI
 
[138]
2016 | Journal Article | LibreCat-ID: 9957
Brökelmann, Michael, Andreas Unger, Tobias Meyer, Simon Althoff, Walter Sextro, Matthias Hunstig, Florian Biermann, and Karsten Guth. “Kupferbondverbindungen Intelligent Herstellen.” Wt-Online 7/8 (2016): 512–19.
LibreCat
 
[137]
2016 | Conference Paper | LibreCat-ID: 9958
Dunst, Paul, Walter Sextro, Peter Bornmann, Tobias Hemsel, and Walter Littmann. “Transportation of Dry Fine Powders by Coordinated Friction Manipulation.” In PAMM Proc. Appl. Math. Mech. 16, 635–36. Braunschweig, 2016. https://doi.org/10.1002/pamm.201610306.
LibreCat | DOI
 
[136]
2016 | Conference Paper | LibreCat-ID: 9960
Eichwald, Paul, Andreas Unger, Florian Eacock, Simon Althoff, Walter Sextro, Karsten Guth, and Michael Brökelmann. “Micro Wear Modeling in Copper Wire Wedge Bonding.” In IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
 
[135]
2016 | Conference Paper | LibreCat-ID: 9961
Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Modeling of Complex Redundancy in Technical Systems with Bayesian Networks.” In Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
 
[134]
2016 | Conference Paper | LibreCat-ID: 9963
Kohl, Sergej, Walter Sextro, and Sebastian Schulze. “Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis Using ADAMS.” In The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 1–12. Cyberjaya, Malaysia, 2016, 2016.
LibreCat
 
[133]
2016 | Conference Paper | LibreCat-ID: 9964
Lessmeier, Christian, James Kuria Kimotho, Detmar Zimmer, and Walter Sextro. “Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification.” In European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
 
[132]
2016 | Conference Paper | LibreCat-ID: 9966
Meyer , Tobias, Andreas Unger, Simon Althoff, Walter Sextro, Michael Brökelmann, Matthias Hunstig, and Karsten Guth. “Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation.” In IEEE 66th Electronic Components and Technology Conference, 622–28, 2016. https://doi.org/10.1109/ECTC.2016.215.
LibreCat | DOI
 
[131]
2016 | Conference Paper | LibreCat-ID: 9967
Schulze, Sebastian, Walter Sextro, and Sergej Kohl. “Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems.” In 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 1–11, 2016.
LibreCat
 
[130]
2016 | Conference Paper | LibreCat-ID: 9968
Unger, Andreas, Reinhard Schemmel, Tobias Meyer, Florian Eacock, Paul Eichwald, Simon Althoff, Walter Sextro, Michael Brökelmann, Matthias Hunstig, and Karsten Guth. “Validated Simulation of the Ultrasonic Wire Bonding Process.” In Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 251–54. IEEE CPMT Symposium Japan, 2016.
LibreCat
 
[129]
2015 | Conference Paper | LibreCat-ID: 9943
Althoff, Simon, Andreas Unger, Walter Sextro, and Florian Eacock. “Improving the Cleaning Process in Copper Wire Bonding by Adapting Bonding Parameters.” In 2015 17th Electronics Packaging Technology Conference, 1–6, 2015. https://doi.org/10.1109/EPTC.2015.7412402.
LibreCat | DOI
 
[128]
2015 | Journal Article | LibreCat-ID: 9944
Bornmann, Peter, Tobias Hemsel, Walter Sextro, Gianluca Memoli, Mark Hodnett, and Bajram Zeqiri. “Kavitationsdetektion Mittels Self-Sensing-Ultraschallwandler.” Tm - Technisches Messen 82, no. 2 (2015): 73–84. https://doi.org/10.1515/teme-2015-0017.
LibreCat | DOI
 
[127]
2015 | Conference Paper | LibreCat-ID: 9945
Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Integrierte Modellierung Der Dynamik Und Der Verlässlichkeit Komplexer Mechatronischer Systeme.” In 10. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Roman Dumitrescu, Franz Rammig, Wilhelm Schäfer, and Ansgar Trächtler, 101–12. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2015.
LibreCat
 
[126]
2015 | Conference Paper | LibreCat-ID: 9946
Kaul, Thorben, Tobias Meyer, and Walter Sextro. “Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems.” In European Safety and Reliability Conference (ESREL2015), edited by Podofillini et al.}. London: Taylor and Francis, 2015. https://doi.org/10.1201/b19094-290.
LibreCat | DOI
 
[125]
2015 | Conference Paper | LibreCat-ID: 9947
Kimotho, James Kuria, and Walter Sextro. “Comparison and Ensemble of Temperature-Based and Vibration-Based Methods for Machinery Prognostics.” In Annual Conference of the Prognostics and Health Management Society 2015, Vol. 6, 2015.
LibreCat
 
[124]
2015 | Conference Paper | LibreCat-ID: 9949
Meyer, Tobias, Thorben Kaul, and Walter Sextro. “Advantages of Reliability-Adaptive System Operation for Maintenance Planning.” In Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 940–45, 2015. https://doi.org/10.1016/j.ifacol.2015.09.647.
LibreCat | DOI
 
[123]
2015 | Conference Paper | LibreCat-ID: 9950
Meyer, Tobias, James Kuria Kimotho, and Walter Sextro. “Anforderungen an Condition-Monitoring-Verfahren Zur Nutzung Im Zuverläsigkeitsgeregelten Betrieb Adaptiver Systeme.” In 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverlässiger Produkte, 111–22. Leonberg, 2015.
LibreCat
 
[122]
2015 | Conference Paper | LibreCat-ID: 9951
Meyer, Tobias, Andreas Unger, Simon Althoff, Walter Sextro, Michael Brökelmann, Matthias Hunstig, and Karsten Guth. “Modeling and Simulation of the Ultrasonic Wire Bonding Process.” In 2015 17th Electronics Packaging Technology Conference, 2015. https://doi.org/10.1109/EPTC.2015.7412377.
LibreCat | DOI
 
[121]
2015 | Conference Paper | LibreCat-ID: 9952
Schulte, Frank, Jan Neuhaus, and Walter Sextro. “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties.” In Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 1109–17, 2015.
LibreCat
 
[120]
2015 | Conference Paper | LibreCat-ID: 9954
Unger, Andreas, Walter Sextro, Tobias Meyer, Paul Eichwald, Simon Althoff, Florian Eacock, and Michael Brökelmann. “Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear.” In 2015 17th Electronics Packaging Technology Conference, 2015. https://doi.org/10.1109/EPTC.2015.7412375.
LibreCat | DOI
 
[119]
2014 | Book | LibreCat-ID: 25168
Gausemeier, Jürgen, Franz-Josef Rammig, Wilhelm Schäfer, and Walter Sextro. Dependability of Self-Optimizing Mechatronic Systems. Heidelberg, Germany: Springer-Verlag, 2014.
LibreCat
 
[118]
2014 | Book Chapter | LibreCat-ID: 25173
Dellnitz, Michael, Kathrin Flaßkamp, Philip Hartmann, Martin Krüger, Tobias Meyer, Claudia Priesterjahn, Sina Ober-Blöbaum, et al. “Self-Optimizing Mechatronic Systems.” In Dependability of Self-Optimizing Mechatronic Systems, Kapitel: 1.1, 3–12. Heidelberg, Germany: Springer-Verlag, 2014.
LibreCat
 
[117]
2014 | Book Chapter | LibreCat-ID: 28394
Dorociak, Rafal , J{\"u}rgen Gausemeier, Peter Iwanek, Tobias Meyer, Walter Sextro, and Christoph Sondermann-W{\"o}lke. “Development of the Active Guidance Module.” In Dependability of Self-Optimizing Mechatronic Systems, 178–82. AACE Press, 2014.
LibreCat
 
[116]
2014 | Book | LibreCat-ID: 28396
Gausemeier, J{\"u}rgen, Franz-Josef Rammig, Wilhelm Sch{\"a}fer, and Walter Sextro. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany, 2014.
LibreCat
 
[115]
2014 | Book Chapter | LibreCat-ID: 28399
Dorociak, Rafal, J{\"u}rgen Gausemeier, Peter Iwanek, Tobias Meyer, and Walter Sextro. “Selecting Suitable Methods Using the Methodology.” In Dependability of Self-Optimizing Mechatronic Systems, 174–78. Springer-Verlag Berlin Heidelberg, 2014.
LibreCat
 
[114]
2014 | Book Chapter | LibreCat-ID: 28400
Dorociak, Rafal, J{\"u}rgen Gausemeier, Peter Iwanek, Tobias Meyer, and Walter Sextro. “Selecting Suitable Methods Using the Methodology.” In Dependability of Self-Optimizing Mechatronic Systems, 174–78. Springer-Verlag Berlin Heidelberg, 2014.
LibreCat
 
[113]
2014 | Book Chapter | LibreCat-ID: 28410
Iwanek, Peter , Tobias Meyer, Claudia Priesterjahn, Walter Sextro, and Mareen Va{\ss}holz. “Challenges.” In Dependability of Self-Optimizing Mechatronic Systems, 12–15. Springer-Verlag, Heidelberg, Germany, 2014.
LibreCat
 
[112]
2014 | Conference Paper | LibreCat-ID: 9868
Althoff, Simon, Jan Neuhaus, Tobias Hemsel, and Walter Sextro. “Improving the Bond Quality of Copper Wire Bonds Using a Friction Model Approach.” In Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 1549–55, 2014. https://doi.org/10.1109/ECTC.2014.6897500.
LibreCat | DOI
 
[111]
2014 | Conference Paper | LibreCat-ID: 9869
Bornmann, Peter, Tobias Hemsel, Walter Sextro, Gianluca Memoli, Mark Hodnett, and Bajram Zeqiri. “Self-Sensing Ultrasound Transducer for Cavitation Detection.” In 2014 IEEE International Ultrasonics Symposium Proceedings, 663–66, 2014. https://doi.org/10.1109/ULTSYM.2014.0163.
LibreCat | DOI
 
[110]
2014 | Conference Paper | LibreCat-ID: 9871
Eichwald, Paul, Walter Sextro, Simon Althof, Florian Eacock, Andreas Unger, Tobias Meyer, and Karsten Guth. “Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding.” In Proceedings of the 47th International Symposium on Microelectronics, 856–61, 2014. https://doi.org/10.4071/isom-THP34.
LibreCat | DOI
 
[109]
2014 | Book | LibreCat-ID: 9873
Gausemeier, Jürgen, Franz Josef Rammig, Wilhelm Schäfer, and Walter Sextro. Dependability of Self-Optimizing Mechatronic Systems. Vol. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014.
LibreCat
 
[108]
2014 | Journal Article | LibreCat-ID: 9874
Hemsel, Tobias, Peter Bornmann, Takeshi Morita, Christoph Sondermann-Wölke, and Walter Sextro. “Reliability Analysis of Ultrasonic Power Transducers.” Archive of Applied Mechanics, 2014, 1–7. https://doi.org/10.1007/s00419-014-0965-4.
LibreCat | DOI
 
[107]
2014 | Journal Article | LibreCat-ID: 9876
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “High-Velocity Operation of Piezoelectric Inertia Motors: Experimental Validation.” Archive of Applied Mechanics, 2014, 1–9. https://doi.org/10.1007/s00419-014-0940-0.
LibreCat | DOI
 
[106]
2014 | Conference Paper | LibreCat-ID: 9879
Kimotho, James Kuria , Tobias Meyer, and Walter Sextro. “PEM Fuel Cell Prognostics Using Particle Filter with Model Parameter Adaptation.” In Prognostics and Health Management (PHM), 2014 IEEE Conference On, 1–6, 2014. https://doi.org/10.1109/ICPHM.2014.7036406.
LibreCat | DOI
 
[105]
2014 | Conference Paper | LibreCat-ID: 9880
Kimotho, James Kuria, and Walter Sextro. “An Approach for Feature Extraction and Selection from Non-Trending Data for Machinery Prognosis.” In Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, Vol. 5, 2014.
LibreCat
 
[104]
2014 | Journal Article | LibreCat-ID: 9881
Kimotho, James Kuria, and Walter Sextro. “Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation.” PAMM 14, no. 1 (2014): 815–16. https://doi.org/10.1002/pamm.201410388.
LibreCat | DOI
 
[103]
2014 | Journal Article | LibreCat-ID: 9882
Kohl, Sergej, Walter Sextro, and Armin Zuber. “Tire Footprint Analysis Depending on the Elastokinematics of a Multi-Link Suspension System Using Multi-Body Dynamics Simulation.” PAMM 14, no. 1 (2014): 65–66. https://doi.org/10.1002/pamm.201410020.
LibreCat | DOI
 
[102]
2014 | Book Chapter | LibreCat-ID: 9883
Meyer, Tobias, Claudia Priesterjahn, and Walter Sextro. “Conclusion and Outlook.” In Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier, Franz Josef Rammig, Wilhelm Schäfer, and Walter Sextro, 189–90. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014. https://doi.org/10.1007/978-3-642-53742-4_5.
LibreCat | DOI
 
[101]
2014 | Journal Article | LibreCat-ID: 9885
Meyer , Tobias, Christoph Sondermann-Wölke, and Walter Sextro. “Method to Identify Dependability Objectives in Multiobjective Optimization Problem.” Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence 15 (2014): 46–53. https://doi.org/10.1016/j.protcy.2014.09.033.
LibreCat | DOI
 
[100]
2014 | Conference Paper | LibreCat-ID: 9887
Neuhaus, Jan, and Walter Sextro. “Thermo-Mechanical Model for Wheel Rail Contact Using Coupled Point Contact Elements.” In Proceedings of the 5th International Conference on Computational Methods, edited by G.R. Liu and Z.W. Guan. ScienTech Publisher, 2014.
LibreCat
 
[99]
2014 | Journal Article | LibreCat-ID: 9888
Schulze, Sebastian, Walter Sextro, and Frank Grüter. “Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications.” PAMM 14, no. 1 (2014): 39–40. https://doi.org/10.1002/pamm.201410012.
LibreCat | DOI
 
[98]
2014 | Conference Paper | LibreCat-ID: 9889
Sprock, Christian, and Walter Sextro. “Time-Efficient Dynamic Analysis of Structures Exhibiting Nonlinear Peak Bending.” In Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 320–24, 2014. https://doi.org/10.1109/I2MTC.2014.6860760.
LibreCat | DOI
 
[97]
2014 | Conference Paper | LibreCat-ID: 9890
Sprock, Christian, and Walter Sextro. “Time-Efficient Analysis of Nonlinear Dynamic Behavior.” In Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, 293–94, 2014.
LibreCat
 
[96]
2014 | Conference Paper | LibreCat-ID: 9891
Sprock, Christian, and Walter Sextro. “Time-Efficient Analysis of Nonlinear Peak Bending Behavior.” In Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 1–8, 2014.
LibreCat
 
[95]
2014 | Conference Paper | LibreCat-ID: 9892
Sprock, Christian, and Walter Sextro. “Vibration Analysis of Mechanical Structures Using Multisine Excitation Techniques.” In Proceedings of 31st Danubia-Adria Symposium. 2014, 2014.
LibreCat
 
[94]
2014 | Book Chapter | LibreCat-ID: 9893
Trächtler, Ansgar, Christian Hölscher, Christoph Rasche, Claudia Priesterjahn, Detmar Zimmer, Jan Henning Keßler, Katharin Stahl, et al. “Introduction to Self-Optimization and Dependability.” In Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier, Franz Josef Rammig, Wilhelm Schäfer, and Walter Sextro, 1–24. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014. https://doi.org/10.1007/978-3-642-53742-4_1.
LibreCat | DOI
 
[93]
2014 | Book Chapter | LibreCat-ID: 9894
Trächtler, Ansgar, Bernd Kleinjohann, Christian Heinzemann, Christoph Rasche, Claudia Priesterjahn, Dominik Steenken, Heike Wehrheim, et al. “Case Study.” In Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier, Franz Josef Rammig, Wilhelm Schäfer, and Walter Sextro, 173–88. Lecture Notes in Mechanical Engineering. Springer Berlin Heidelberg, 2014. https://doi.org/10.1007/978-3-642-53742-4_4.
LibreCat | DOI
 
[92]
2014 | Conference Paper | LibreCat-ID: 9895
Unger, Andreas, Walter Sextro, Simon Althoff, Paul Eichwald, Tobias Meyer, Florian Eacock, and Michael Brökelmann. “Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds.” In Proceedings of the 47th International Symposium on Microelectronics (IMAPS), 289–94. San Diego, CA, US, 2014.
LibreCat
 
[91]
2014 | Conference Paper | LibreCat-ID: 9896
Unger, Andreas, Walter Sextro, Simon Althoff, Tobias Meyer, Michael Brökelmann, Klaus Neumann, René Felix Reimann, Karsten Guth, and Daniel Bolowski. “Data-Driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding.” In Proceedings of 8th International Conference on Integrated Power Electronic Systems, 141:175–80, 2014.
LibreCat
 
[90]
2013 | Conference Paper | LibreCat-ID: 26973
Meyer, Tobias, Jan Henning Kessler, Walter Sextro, and Ansgar Trächtler. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” In The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
 
[89]
2013 | Book Chapter | LibreCat-ID: 23139
Kessler, Jan Henning, Tobias Meyer, Walter Sextro, Christoph Sondermann-Wölke, and Ansgar Trächtler. “Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept.” In Dependability of Self-Optimizing Mechatronic Systems, 55–62. Springer-Verlag, Heidelberg, Germany, 2013.
LibreCat
 
[88]
2013 | Conference Paper | LibreCat-ID: 23140
Meyer, Tobias, Jan Henning Kessler, Walter Sextro, and Ansgar Trächtler. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” In The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
 
[87]
2013 | Book Chapter | LibreCat-ID: 23149
Hölscher, Christian, Jan Henning Kessler, Tobias Meyer, Christoph Rasche, Peter Reinold, Walter Sextro, Christoph Sondermann-Wölke, and Detmar Zimmer. “Applications of Self-Optimizing Systems.” In Dependability of Self-Optimizing Mechatronic Systems, 16–22. Springer-Verlag, Heidelberg, Germany, 2013.
LibreCat
 
[86]
2013 | Journal Article | LibreCat-ID: 9794
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Increasing the Power of Piezoelectric Energy Harvesters by Magnetic Stiffening.” Journal of Intelligent Material Systems and Structures 24, no. 11 (2013): 1332–42. https://doi.org/10.1177/1045389X13483021.
LibreCat | DOI
 
[85]
2013 | Journal Article | LibreCat-ID: 9795
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Enhanced Energy Harvesting Using Multiple Piezoelectric Elements: Theory and Experiments.” Sensors and Actuators A: Physical 200 (2013): 138–46. https://doi.org/10.1016/j.sna.2013.01.008.
LibreCat | DOI
 
[84]
2013 | Conference Paper | LibreCat-ID: 9796
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems.” In Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, 159–61. Berichte Aus Dem IDS. Hannover, Germany, 2013.
LibreCat
 
[83]
2013 | Conference Paper | LibreCat-ID: 9797
Althoff, Simon, Jan Neuhaus, Tobias Hemsel, and Walter Sextro. “A Friction Based Approach for Modeling Wire Bonding.” In IMAPS 2013, 46th International Symposium on Microelectronics. Orlando (Florida), USA, 2013. https://doi.org/10.4071/isom-2013-TA67.
LibreCat | DOI
 
[82]
2013 | Conference Paper | LibreCat-ID: 9799
Eichwald, Paul, Walter Sextro, Simon Althoff, Florian Eacock, Mark Schnietz, Karsten Guth, and Michael Brökelmann. “Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding.” In 15th Electronics Packaging Technology Conference, 2013. https://doi.org/10.1109/EPTC.2013.6745803.
LibreCat | DOI
 
[81]
2013 | Conference Paper | LibreCat-ID: 9801
Hunstig, Matthias, Waleed Al-Ashtari, Tobias Hemsel, and Walter Sextro. “Leistungs- Und Bandbreitensteigerung von Energy-Harvesting-Generatoren Für Energieautarke Systeme.” In 9. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Roman Dumitrescu, Franz Rammig, Wilhelm Schäfer, and Ansgar Trächtler, 359–72. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2013.
LibreCat
 
[80]
2013 | Conference Paper | LibreCat-ID: 9802
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation.” In Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, 16–18. Hannover, Germany, 2013.
LibreCat
 
[79]
2013 | Journal Article | LibreCat-ID: 9803
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Modelling the Friction Contact in an Inertia Motor.” Journal of Intelligent Material Systems and Structures 24, no. 11 (2013): 1380–91. https://doi.org/10.1177/1045389X12474354.
LibreCat | DOI
 
[78]
2013 | Journal Article | LibreCat-ID: 9804
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Stick-Slip and Slip-Slip Operation of Piezoelectric Inertia Drives - Part II: Frequency-Limited Excitation.” Sensors and Actuators A: Physical 200 (2013): 79–89. https://doi.org/10.1016/j.sna.2012.11.043.
LibreCat | DOI
 
[77]
2013 | Journal Article | LibreCat-ID: 9805
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Stick-Slip and Slip-Slip Operation of Piezoelectric Inertia Drives - Part I: Ideal Excitation.” Sensors and Actuators A: Physical 200 (2013): 90–100. https://doi.org/10.1016/j.sna.2012.11.012.
LibreCat | DOI
 
[76]
2013 | Journal Article | LibreCat-ID: 9807
Kimotho, James Kuria, Christopher Sondermann-Wölke, Tobias Meyer, and Walter Sextro. “Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization.” Chemical Engineering Transactions 33 (2013): 619–24. https://doi.org/10.3303/CET1333104.
LibreCat | DOI
 
[75]
2013 | Journal Article | LibreCat-ID: 9808
Kimotho, James Kuria, Chritoph Sondermann-Wölke, Tobias Meyer, and Walter Sextro. “Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation.” International Journal of Prognostics and Health Management 4, no. 2 (2013).
LibreCat
 
[74]
2013 | Conference Paper | LibreCat-ID: 9855
Kohl, Sergej, Armin Zuber, and Walter Sextro. “Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems.” In Proc. Appl. Math. Mech., 13:23–24, 2013. https://doi.org/10.1002/pamm.201310007.
LibreCat | DOI
 
[73]
2013 | Conference Paper | LibreCat-ID: 9858
Meyer, Tobias, Christina Hölscher, Michael Menke, Walter Sextro, and Detmar Zimmer. “Multiobjective Optimization Including Safety of Operation Applied to a Linear Drive System.” In Proc. Appl. Math. Mech., 13:483–84, 2013. https://doi.org/10.1002/pamm.201310234.
LibreCat | DOI
 
[72]
2013 | Conference Paper | LibreCat-ID: 9859
Meyer , Tobias, Jan Henning Keßler, Walter Sextro, and Ansgar Trächtler. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” In Proceedings of the Annual Reliability and Maintainability Symposium (RAMS). Orlando, FL, 2013. https://doi.org/10.1109/RAMS.2013.6517636.
LibreCat | DOI
 
[71]
2013 | Journal Article | LibreCat-ID: 9860
Meyer, Tobias, Christoph Sondermann-Wölke, James Kuria Kimotho, and Walter Sextro. “Controlling the Remaining Useful Lifetime Using Self-Optimization.” Chemical Engineering Transactions 33 (2013): 625–30. https://doi.org/10.3303/CET1333105.
LibreCat | DOI
 
[70]
2013 | Conference Paper | LibreCat-ID: 9861
Meyer, Tobias, Christoph Sondermann-Wölke, Walter Sextro, Martin Riedl, Alexander Gouberman, and Markus Siegle. “Bewertung Der Zuverlässigkeit Selbstoptimierender Systeme Mit Dem LARES-Framework.” In 9. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Roman Dumitrescu, Franz Rammig, Wilhelm Schäfer, and Ansgar Trächtler, 161–74. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2013.
LibreCat
 
[69]
2012 | Journal Article | LibreCat-ID: 9781
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Frequency Tuning of Piezoelectric Energy Harvesters by Magnetic Force.” Smart Materials and Structures 21, no. 3 (2012): 035019.
LibreCat
 
[68]
2012 | Journal Article | LibreCat-ID: 9782
Al-Ashtari, Waleed, Matthias Hunstig, Tobias Hemsel, and Walter Sextro. “Analytical Determination of Characteristic Frequencies and Equivalent Circuit Parameters of a Piezoelectric Bimorph.” Journal of Intelligent Material Systems and Structures 23, no. 1 (2012): 15–23. https://doi.org/10.1177/1045389X11430742.
LibreCat | DOI
 
[67]
2012 | Conference Paper | LibreCat-ID: 9783
Bornmann, Peter, Tobias Hemsel, Walter Sextro, Takafumi Maeda, and Takeshi Morita. “Non-Perturbing Cavitation Detection / Monitoring in Sonochemical Reactors.” In Ultrasonics Symposium (IUS), 2012 IEEE International, 1141–44, 2012. https://doi.org/10.1109/ULTSYM.2012.0284.
LibreCat | DOI
 
[66]
2012 | Conference Paper | LibreCat-ID: 9787
Kohl, Sergej, Walter Sextro, and Armin Zuber. “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung Basierend Auf Einer Neuen Auslegungstheorie.” In 8. Tag Des Fahrwerks, Aachen, 2012, 38–60. Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen, 2012.
LibreCat
 
[65]
2012 | Conference Paper | LibreCat-ID: 9791
Sondermann-Wölke , Christoph, Tobias Meyer, Rafal Dorociak, Jürgen Gausemeier, and Walter Sextro. “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System Based on Its Principle Solution.” In Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012). Helsinki, Finland, 2012.
LibreCat
 
[64]
2012 | Journal Article | LibreCat-ID: 9806
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Analysis of Different Operation Modes for Inertia Motors.” ACTUATOR 2012 Conference Proceedings, 2012, 761–64.
LibreCat
 
[63]
2011 | Conference Paper | LibreCat-ID: 26981
Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In Technische Zuverlässigkeit –TTZ, 2011.
LibreCat
 
[62]
2011 | Conference Paper | LibreCat-ID: 23184
Lurye, Oleg, Christoph Sondermann-Wölke, Ivan Kromov, Walter Sextro, and Ansgar Trächtler. “Verlässlichkeitsanalyse Des Degradationsverhaltens Mechatronischer Systeme Mit Mehreren Betriebsstrategien.” In VDI Bericht Zur Tagung Technische Zuverlässigkeit. Leonberg: VDI-Verlag, 2011.
LibreCat
 
[61]
2011 | Conference Paper | LibreCat-ID: 23194
Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In Technische Zuverlässigkeit TTZ, 2011.
LibreCat
 
[60]
2011 | Conference Paper | LibreCat-ID: 9768
Lurie, Oleg, Ivan Kromov, Ansgar Trächtler, Christoph Sondermann-Wölke, and Walter Sextro. “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies.” In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 99–110. Leonberg, 2011.
LibreCat
 
[59]
2011 | Conference Paper | LibreCat-ID: 9771
Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 291–302. Leonberg, 2011.
LibreCat
 
[58]
2011 | Journal Article | LibreCat-ID: 9772
Tomberger, Christoph, Peter Dietmaier, Walter Sextro, and Klaus Six. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.” Wear 271 (2011): 2–12. https://doi.org/10.1016/j.wear.2010.10.025.
LibreCat | DOI
 
[57]
2011 | Patent | LibreCat-ID: 9790
Sextro, Walter, Matthias Hunstig, Peter Bornmann, and Tobias Hemsel. “Patent DE10201003395: Anordnung Und Verfahren Zur Mehrdimensionalen Messung von Schwingungen Eines Objekts. ,” 2011.
LibreCat
 
[56]
2010 | Journal Article | LibreCat-ID: 9747
Hölzl, Johannes Sebastian, and Walter Sextro. “Reibungsdämpfung in Ausgedehnten, Verschraubten Fügestellen.” PAMM 10, no. 1 (2010): 247–48. https://doi.org/10.1002/pamm.201010116.
LibreCat | DOI
 
[55]
2010 | Journal Article | LibreCat-ID: 9748
Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.” SAE International Journal of Passenger Cars- Mechanical Systems, 2010, 929–35. https://doi.org/10.4271/2010-01-1422.
LibreCat | DOI
 
[54]
2010 | Conference Paper | LibreCat-ID: 9753
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Anregungskonzepte Und Modellierung Piezoelektrischer Trägheitsmotoren.” In 7. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Franz Rammig, Wilhelm Schäfer, and Ansgar Trächtler, 272:129–41. HNI-Verlagsschriftenreihe. Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2010.
LibreCat
 
[53]
2010 | Conference Paper | LibreCat-ID: 9754
Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Improving the Performance of Piezoelectric Inertia Motors.” In ACTUATOR 2010 Conference Proceedings, 657–61, 2010.
LibreCat
 
[52]
2010 | Conference Paper | LibreCat-ID: 9760
Sondermann-Wölke, Christoph, Tobias Hemsel, Walter Sextro, Jürgen Gausemeier, and Sebastian Pook. “Guideline for the Dependability-Oriented Design of Self-Optimizing Systems.” In Industrial Informatics (INDIN), 2010 8th IEEE International Conference On, 739–44, 2010. https://doi.org/10.1109/INDIN.2010.5549490.
LibreCat | DOI
 
[51]
2010 | Journal Article | LibreCat-ID: 9761
Sondermann-Wölke, Christoph, and Walter Sextro. “Integration of Condition Monitoring in Self-Optimizing Function Modules Applied to the Active Railway Guidance Module.” International Journal On Advances in Intelligent Systems 3, no. 1–3 (2010): 65–74.
LibreCat
 
[50]
2010 | Conference Paper | LibreCat-ID: 9762
Sondermann-Wölke, Christoph, Walter Sextro, Jens Geisler, and Ansgar Trächtler. “Experimentelle Untersuchung Der Selbstoptimierung Innerhalb Des RailCab-Spurführungsmoduls.” In Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Frans Josef Rammig, and Ansgar Trächtler, 272:411–20. HNI-Verlagsschriftenreihe. Paderborn, 2010.
LibreCat
 
[49]
2010 | Conference Paper | LibreCat-ID: 9763
Sondermann-Wölke, Christoph, Jens Geisler, and Walter Sextro. “Increasing the Reliability of a Self-Optimizing Railway Guidance System.” In Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 1–6, 2010. https://doi.org/10.1109/RAMS.2010.5448080.
LibreCat | DOI
 
[48]
2010 | Journal Article | LibreCat-ID: 9764
Tomberger, Christoph, Peter Dietmaier, Rosenberger Martin, Walter Sextro, and Klaus Six. “Einfluss von Oberflächenrauheit, Fluiden Zwischenschichten Und Kontakttemperaturen Auf Den Kraftschluss Zwischen Rad Und Schiene.” ZEVrail 134 (2010): 127–35.
LibreCat
 
[47]
2009 | Conference Paper | LibreCat-ID: 9742
Sondermann-Wölke, Christoph, and Walter Sextro. “Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules.” In Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:, 15–20, 2009. https://doi.org/10.1109/ComputationWorld.2009.47.
LibreCat | DOI
 
[46]
2007 | Conference Paper | LibreCat-ID: 9560
Tonchev, Anton, Wolfgang Hirschberg, Walter Sextro, Zoltan Major, and Josef Neges. “Modellierung Der Hysterese- Und Adhäsionseffekte Zwischen Bremsbelag Und Bremsscheibe.” In 27. Internationales Mju-Symposium/Bremsen-Fachtagung, 29–49. 12. Bad Neuenahr: VDI Verlag GmbH, 2007.
LibreCat
 
[45]
2007 | Conference Paper | LibreCat-ID: 9561
Tonchev, Anton, Wolfgang Hirschberg, Walter Sextro, Zoltan Major, and Josef Neges. “Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc.” In 27. Internationales Mju-Symposium/Bremsen-Fachtagung, 144–63. 12. Bad Neuenahr: VDI Verlag GmbH, 2007.
LibreCat
 
[44]
2007 | Conference Paper | LibreCat-ID: 9563
Genzo, Alexander, Walter Sextro, and Lars Panning. “Schwingungsverhalten Elastischer Körper Mit Nichtlinearen Kopplungen in Ausgedehnten Reibkontakten.” In VDI-Berichte, 2022:147–61. Düsseldorf: VDI Verlag GmbH, 2007.
LibreCat
 
[43]
2007 | Journal Article | LibreCat-ID: 9567
Szwedowicz, J, R Visser, Walter Sextro, and P. A Masserey. “On Nonlinear Forced Vibration of Shrouded Turbine Blades.” Journal of Turbomachinery 130, no. 1 (2007): 011002–011002.
LibreCat
 
[42]
2006 | Conference Paper | LibreCat-ID: 9535
Genzo, Alexander, and Walter Sextro. “Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts.” In Proceedings of ISMA - International Conference on Noise and Vibration Engineering, 51–52, 2006.
LibreCat
 
[41]
2006 | Book Chapter | LibreCat-ID: 9536
Gutzeit, F, Walter Sextro, and Matthias Kröger. “Unsteady Rolling Contact of Rubber Wheels.” In Analysis and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst, 27:261–70. Lecture Notes in Applied and Computational Mechanics. Springer Berlin Heidelberg, 2006. https://doi.org/10.1007/3-540-31761-9_29.
LibreCat | DOI
 
[40]
2006 | Conference Paper | LibreCat-ID: 9542
Hofmeisterro, Adolf, Walter Sextro, and Otto Röschel. “Error-Workspace Analysis of Plane Mechanisms.” In Proceedings of EUCOMES, the First European Conference on Mechanism Science, 1–12. Obergurgl, {\"O}sterreich, 2006.
LibreCat
 
[39]
2006 | Book Chapter | LibreCat-ID: 9551
Sextro, Walter, Patrick Moldenhauer, M Wangenheim, Markus Lindner, and Matthias Kröger. “Contact Behaviour of a Sliding Rubber Element.” In Analysis and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst, 27:243–52. Lecture Notes in Applied and Computational Mechanics. Springer Berlin Heidelberg, 2006. https://doi.org/10.1007/3-540-31761-9_27.
LibreCat | DOI
 
[38]
2005 | Journal Article | LibreCat-ID: 9266
Genzo, Alexander, Walter Sextro, and Karl Popp. “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM 5, no. 1 (2005): 91–92. https://doi.org/10.1002/pamm.200510026.
LibreCat | DOI
 
[37]
2005 | Journal Article | LibreCat-ID: 9526
Genzo, Alexander, Walter Sextro, and Karl Popp. “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM 5, no. 1 (2005): 91–92. https://doi.org/10.1002/pamm.200510026.
LibreCat | DOI
 
[36]
2005 | Journal Article | LibreCat-ID: 9529
Hofmeister, Adolf, Walter Sextro, and Otto Röschel. “Unkontrollierbare Bewegungen Ebener Mechanismen Mit Gelenkspiel.” PAMM 5, no. 1 (2005): 201–2. https://doi.org/10.1002/pamm.200510078.
LibreCat | DOI
 
[35]
2004 | Conference Paper | LibreCat-ID: 8952
Götting, Florian, Walter Sextro, Lars Panning, and Karl Popp. “Systematic Mistuning of Bladed Disk Assemblies with Friction Contacts.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 6:257–67, 2004.
LibreCat
 
[34]
2004 | Journal Article | LibreCat-ID: 9520
Lindner, Markus, Walter Sextro, and Karl Popp. “Hysteretic Friction of a Sliding Rubber Element.” PAMM 4, no. 1 (2004): 101–2. https://doi.org/10.1002/pamm.200410032.
LibreCat | DOI
 
[33]
2004 | Conference Paper | LibreCat-ID: 9523
Panning, Lars, Karl Popp, Walter Sextro, and Florian Götting. “Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 6:269–80. Vienna, Austria, 2004. https://doi.org/10.1115/GT2004-53316.
LibreCat | DOI
 
[32]
2003 | Conference Paper | LibreCat-ID: 8933
Götting, Florian, Walter Sextro, Lars Panning, and Karl Popp. “Schwingungsverhalten von Verstimmten Beschaufelungen Mit Reibelementen.” In Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Darmstadt, edited by H Irretier , R Nordmann, and H Springer, 201–10. Vieweg-Verlag, 2003.
LibreCat
 
[31]
2003 | Journal Article | LibreCat-ID: 8934
Genzo, Alexander, Walter Sextro, and Karl Popp. “Erzwungene Schwingungen von Elastischen Mehrkörpersystemen Mit Reibkontakten.” PAMM 2, no. 1 (2003): 120–21. https://doi.org/10.1002/pamm.200310046.
LibreCat | DOI
 
[30]
2003 | Journal Article | LibreCat-ID: 8937
Panning, Lars, Walter Sextro, and Karl Popp. “Design of Friction Dampers for Mistuned Bladed Disks.” PAMM 3, no. 1 (2003): 118–19. https://doi.org/10.1002/pamm.200310336.
LibreCat | DOI
 
[29]
2003 | Journal Article | LibreCat-ID: 8938
Panning, Lars, Walter Sextro, and Karl Popp. “Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers.” International Journal of Rotating Machinery 9, no. 3 (2003): 219–28.
LibreCat
 
[28]
2003 | Journal Article | LibreCat-ID: 8939
Popp, Karl, Lars Panning, and Walter Sextro. “Vibration Damping by Friction Forces -Theory and Applications.” Journal of Vibration and Control 9 (2003): 419–48.
LibreCat
 
[27]
2003 | Conference Paper | LibreCat-ID: 8940
Sextro, Walter, and Karl Popp. “Optimierung Des Schwingungsverhaltens Elastischer Strukturen Mit Reibfugen Am Beispiel von Turbomaschinenschaufeln.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW), 40. Frankfurt am Main, Germany, 2003.
LibreCat
 
[26]
2003 | Conference Paper | LibreCat-ID: 8941
Szwedowicz, J, Walter Sextro, R Visser, and P.A Masserey. “On Forced Vibration of Shrouded Turbine Blades.” In ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference. Atlanta, Georgia, USA, 2003. https://doi.org/doi:10.1115/GT2003-38808.
LibreCat | DOI
 
[25]
2002 | Conference Paper | LibreCat-ID: 8928
Panning, Lars, Walter Sextro, and Karl Popp. “Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction Damping.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande, 2002.
LibreCat
 
[24]
2002 | Conference Paper | LibreCat-ID: 8929
Panning, Lars, Walter Sextro, and Karl Popp. “Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers.” In Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC. Honolulu, Hawaii, USA, 2002.
LibreCat
 
[23]
2002 | Conference Paper | LibreCat-ID: 8931
Sextro, Walter, Lars Panning, and Florian Götting. “Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts.” In Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air. Amsterdam, Niederlande, 2002.
LibreCat
 
[22]
2002 | Conference Paper | LibreCat-ID: 8932
Sextro, Walter, and Karl Popp. “Optimierung Des Schwingungsverhaltens Elastischer Strukturen Mit Reibfugen.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, 157–83. Frankfurt am Main, Germany, 2002.
LibreCat
 
[21]
2001 | Conference Paper | LibreCat-ID: 8921
Panning, Lars, Walter Sextro, and Karl Popp. “Schwingungsanalyse Verstimmter Schaufelkränze Mit Reibelementen.” In Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Wien, edited by H Irretier, R Nordmann, and H Springer, 297–306. Vieweg-Verlag, 2001.
LibreCat
 
[20]
2001 | Journal Article | LibreCat-ID: 8922
Sextro, Walter. “Heat and Wear Generation for Rolling Contacts.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 81 (2001): 225–26.
LibreCat
 
[19]
2001 | Conference Paper | LibreCat-ID: 8923
Sextro, Walter. “Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction.” In ASME Design Engineering Technical Conferences, 1–12. Pittsburgh, Pennsylvania, USA, 2001.
LibreCat
 
[18]
2001 | Journal Article | LibreCat-ID: 8924
Sextro, Walter, Karl Popp, and Tomasz Krzyzynski. “Localization in Nonlinear Mistuned Systems with Cyclic Symmetry.” Nonlinear Dynamics 25, no. 1–3 (2001): 207–20. https://doi.org/10.1023/A:1012915002568.
LibreCat | DOI
 
[17]
2000 | Journal Article | LibreCat-ID: 8918
Krzyzynski, Tomasz, Karl Popp, and Walter Sextro. “On Some Regularities in Dynamic Response of Cyclic Periodic Structures.” Chaos, Solitons \& Fractals 11, no. 10 (2000): 1597–1609. https://doi.org/10.1016/S0960-0779(99)00080-6.
LibreCat | DOI
 
[16]
2000 | Conference Paper | LibreCat-ID: 8919
Panning, Lars, Walter Sextro, and Karl Popp. “Optimization of Interblade Friction Damper.” In International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 1–8. Munich, Germany, 2000.
LibreCat
 
[15]
2000 | Conference Paper | LibreCat-ID: 8920
Sextro, Walter. “The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification.” In International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 1–8. Munich, Germany, 2000.
LibreCat
 
[14]
1999 | Conference Paper | LibreCat-ID: 8909
Popp, Karl, and Walter Sextro. “Schwingungsanalyse von Vorgespannten Schaufeln Mit Deckplatten Im Schaufelkranz.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, 21–38. Heidelberg, 1999.
LibreCat
 
[13]
1999 | Conference Paper | LibreCat-ID: 8910
Sextro, Walter. “Experimental Verification of a Non-Hertzian Contact Model.” In International Conference on Computational Methods in Contact Mechanics, 181–90, 1999.
LibreCat
 
[12]
1999 | Conference Paper | LibreCat-ID: 8911
Sextro, Walter. “Forced Vibration of Elastic Structures with Friction Contacts.” In ASME Design Engineering Technical Conferences, 1–10. Las Vegas, Nevada, USA, 1999.
LibreCat
 
[11]
1999 | Journal Article | LibreCat-ID: 8912
Sextro, Walter, and Karl Popp. “Ein Ebenes Reibkontaktmodell Zur Berechnung von Schaufelschwingungen Mit Reibelementen.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 79 (1999): 311–12.
LibreCat
 
[10]
1999 | Conference Paper | LibreCat-ID: 8913
Sextro, Walter, and Karl Popp. “Schwingungsanalyse von Vorgespannten Schaufeln Mit Deckplatten Im Schaufelkranz.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW), 56. Frankfurt am Main, Germany, 1999.
LibreCat
 
[9]
1998 | Conference Paper | LibreCat-ID: 8907
Sextro, Walter, Karl Popp, and I Wolter. “Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers.” In International Congress on Combustion Engines, Proceedings of the 22nd CIMAC, 1:257–70. Kopenhagen, D{\"a}nemark, 1998.
LibreCat
 
[8]
1998 | Conference Paper | LibreCat-ID: 8908
Sextro, Walter, Karl Popp, and I Wolter. “Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers.” In The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7, B:621–30. Honolulu, Hawaii, USA, 1998.
LibreCat
 
[7]
1997 | Conference Paper | LibreCat-ID: 8902
Popp, Karl, and Walter Sextro. “Schwingungsverhalten von Verstimmten Beschaufelungen Mit Reibelementen.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, 131–42. Frankfurt am Main, Germany, 1997.
LibreCat
 
[6]
1997 | Conference Paper | LibreCat-ID: 8903
Sextro, Walter. “Schwingungsverhalten von Schaufelkränzen Mit Reibelementen Bei Frequenzverstimmung.” In VDI-Reihe, Vol. 11. VDI-Verlag, Düsseldorf, 1997.
LibreCat
 
[5]
1997 | Conference Paper | LibreCat-ID: 8904
Sextro, Walter, Karl Popp, and Ivo Wolter. “Improved Reliability of Bladed Disks Due to Friction Dampers.” In The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition, 1997.
LibreCat
 
[4]
1996 | Conference Paper | LibreCat-ID: 8896
Popp, Karl, and Walter Sextro. “Schwingungsverhalten Eines Schaufelkranzes Mit Reibelementen Bei Frequenzverstimmung.” In Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, 53–76. Frankfurt am Main, Germany, 1996.
LibreCat
 
[3]
1996 | Conference Paper | LibreCat-ID: 8897
Popp, Karl, and Walter Sextro. “Dynamical Behaviour of a Bladed Disk with Friction Dampers.” In The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH, 1:157–83. Prag, 1996.
LibreCat
 
[2]
1993 | Journal Article | LibreCat-ID: 8895
Sextro, Walter, and B Schmalhorst. “Static Behaviour of Drill Strings in Curved Boreholes.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 73 (1993): 255–57.
LibreCat
 
[1]
1991 | Book Chapter | LibreCat-ID: 8894
Stelter, Peter, and Walter Sextro. “Bifurcations in Dynamic Systems with Dry Friction.” In Bifurcation and Chaos: Analysis, Algorithms, Applications, edited by R. Seydel, F.W. Schneider, T. Küpper, and H. Troger, 97:343–47. International Series of Numerical Mathematics / Internationale Schriftenreihe Zur Numerischen Mathematik / S{\’e}rie Internationale d’Analyse Num{\’e}rique. Birkhäuser Basel, 1991. https://doi.org/10.1007/978-3-0348-7004-7_44.
LibreCat | DOI
 
Marked Publication(s)

Search

Filter Publications

Display / Sort

Citation Style: Chicago

Export / Embed