152 Publications

Mark all

[152]
2019 | Book | LibreCat-ID: 10002
Intelligente Herstellung zuverlässiger Kupferbondverbindungen
W. Sextro, M. Brökelmann, Intelligente Herstellung Zuverlässiger Kupferbondverbindungen, Springer Verlag, 2019.
LibreCat | DOI
 
[151]
2019 | Conference Paper | LibreCat-ID: 10255
Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement
A. Bender, K. Reinke, W. Sextro, in: 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, Bremen 2019, 2019, pp. 241–248.
LibreCat
 
[150]
2019 | Conference Paper | LibreCat-ID: 10257
Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung
T. Kaul, J. Hentze, W. Sextro, I. Gräßler, in: Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
 
[149]
2019 | Journal Article | LibreCat-ID: 10334
Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding
R. Schemmel, T. Hemsel, C. Dymel, M. Hunstig, M. Brökelmann, W. Sextro, Sensors and Actuators A: Physical 295 (2019) 653–662.
LibreCat | DOI
 
[148]
2019 | Conference Paper | LibreCat-ID: 10258 LibreCat
 
[147]
2018 | Conference Paper | LibreCat-ID: 9987
A particle filtering approach for temperature based prognostics
A. Bender, W. Sextro, in: Safety and Reliability – Safe Societies in a Changing World, Trondheim, Norway, 2018, pp. 1025–1033.
LibreCat
 
[146]
2018 | Conference Paper | LibreCat-ID: 9999
Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges
A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, W. Sextro, in: In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018.
LibreCat | DOI
 
[145]
2018 | Book | LibreCat-ID: 9995
Steigerung der Intelligenz mechatronischer Systeme
T. Meyer, T. Kaul, J.K. Kimotho, W. Sextro, Steigerung Der Intelligenz Mechatronischer Systeme, Springer Nature Switzerland AG. Part of Springer Nature., 2018.
LibreCat
 
[144]
2018 | Journal Article | LibreCat-ID: 9990
Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, W. Sextro, ACTUATOR 2018; 16th International Conference on New Actuators (2018) 142–145.
LibreCat
 
[143]
2018 | Journal Article | LibreCat-ID: 9991
Vibration-Assisted Handling of Dry Fine Powders
P. Dunst, P. Bornmann, T. Hemsel, W. Sextro, Actuators 2018, 7(2). (2018) 1–11.
LibreCat | DOI
 
[142]
2018 | Conference Paper | LibreCat-ID: 9992
Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process
C. Dymel, P. Eichwald, R. Schemmel, T. Hemsel, M. Brökelmann, M. Hunstig, W. Sextro, in: (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1–6.
LibreCat
 
[141]
2018 | Conference Paper | LibreCat-ID: 9998
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS IN ULTRASONIC HEAVY WIRE BONDING
R. Schemmel, T. Hemsel, W. Sextro, in: 6th European Conference on Computational Mechanics (ECCM 6), Glasgow, UK, 2018, pp. 1–12.
LibreCat
 
[140]
2018 | Conference Paper | LibreCat-ID: 9993
Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding
C. Dymel, R. Schemmel, T. Hemsel, W. Sextro, M. Brökelmann, M. Hunstig, in: (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.
LibreCat
 
[139]
2017 | Conference Paper | LibreCat-ID: 9982
MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall
R. Schemmel, T. Hemsel, W. Sextro, in: 43. Deutsche Jahrestagung Für Akustik, Kiel 2017, 2017, pp. 611–614.
LibreCat
 
[138]
2017 | Conference Paper | LibreCat-ID: 9970
Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen
A. Bender, J.K. Kimotho, S. Kohl, W. Sextro, K. Reinke, in: 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123–125.
LibreCat
 
[137]
2017 | Conference Paper | LibreCat-ID: 9969
Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente
A. Bender, T. Kaul, W. Sextro, in: Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, 2017, pp. 347–358.
LibreCat
 
[136]
2017 | Conference Paper | LibreCat-ID: 9971
Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen
A. Bender, W. Sextro, K. Reinke, in: VDI-Berichte 2301, 2017, pp. 49–60.
LibreCat
 
[135]
2017 | Conference Paper | LibreCat-ID: 9983
Model based optimization of dynamics in adaptive headlamps
S. Schulze, W. Sextro, K. Kister, in: Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
 
[134]
2017 | Journal Article | LibreCat-ID: 9976
Formulation of reliability-related objective functions for design of intelligent mechatronic systems
T. Kaul, T. Meyer, W. Sextro, SAGE Journals Vol. 231(4) (2017) 390–399.
LibreCat | DOI
 
[133]
2017 | Journal Article | LibreCat-ID: 9972
Analysis of pipe vibration in an ultrasonic powder transportationsystem
P. Dunst, T. Hemsel, W. Sextro, Elsevier Sensors and Actuators A 263 (2017) 733–736.
LibreCat
 
[132]
2017 | Conference Paper | LibreCat-ID: 9985
Entwicklung verlässlicher, intelligenter Systeme
W. Sextro, T. Meyer, T. Kaul, J.K. Kimotho, in: VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte., Leonberg 2017, 2017, pp. 17–30.
LibreCat
 
[131]
2017 | Journal Article | LibreCat-ID: 9973
Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design
P. Eichwald, S. Althoff, R. Schemmel, W. Sextro, A. Unger, M. Brökelmann, M. Hunstig, IMAPSource Vol. 2017, No. 1 (2017).
LibreCat
 
[130]
2017 | Conference Paper | LibreCat-ID: 9978
Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing
J.K. Kimotho, W. Sextro, T. Hemsel, in: IEEE Transactions on Reliability, 2017, pp. 1–10.
LibreCat | DOI
 
 
[128]
2017 | Conference Paper | LibreCat-ID: 9974
INTEGRATED MODELING OF BEHAVIOR AND RELIABILITY IN SYSTEM DEVELOPMENT
J. Hentze, T. Kaul, I. Grässler, W. Sextro, in: ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, 2017, pp. 385–394.
LibreCat
 
 
[126]
2016 | Conference Paper | LibreCat-ID: 9963
Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS
S. Kohl, W. Sextro, S. Schulze, in: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., Cyberjaya, Malaysia, 2016, 2016, pp. 1–12.
LibreCat
 
[125]
2016 | Conference Paper | LibreCat-ID: 9968
Validated Simulation of the Ultrasonic Wire Bonding Process
A. Unger, R. Schemmel, T. Meyer, F. Eacock, P. Eichwald, S. Althoff, W. Sextro, M. Brökelmann, M. Hunstig, K. Guth, in: Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, IEEE CPMT Symposium Japan, 2016, pp. 251–254.
LibreCat
 
[124]
2016 | Journal Article | LibreCat-ID: 9957
Kupferbondverbindungen intelligent herstellen
M. Brökelmann, A. Unger, T. Meyer, S. Althoff, W. Sextro, M. Hunstig, F. Biermann, K. Guth, Wt-Online 7/8 (2016) 512–519.
LibreCat
 
[123]
2016 | Conference Paper | LibreCat-ID: 9964
Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification
C. Lessmeier, J.K. Kimotho, D. Zimmer, W. Sextro, in: European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
 
[122]
2016 | Conference Paper | LibreCat-ID: 9958
Transportation of dry fine powders by coordinated friction manipulation
P. Dunst, W. Sextro, P. Bornmann, T. Hemsel, W. Littmann, in: PAMM Proc. Appl. Math. Mech. 16, Braunschweig, 2016, pp. 635–636.
LibreCat | DOI
 
[121]
2016 | Conference Paper | LibreCat-ID: 9960
Micro Wear Modeling in Copper Wire Wedge Bonding
P. Eichwald, A. Unger, F. Eacock, S. Althoff, W. Sextro, K. Guth, M. Brökelmann, in: IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
 
[120]
2016 | Conference Paper | LibreCat-ID: 9961
Modeling of Complex Redundancy in Technical Systems with Bayesian Networks
T. Kaul, T. Meyer, W. Sextro, in: Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
 
[119]
2016 | Conference Paper | LibreCat-ID: 9966
Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation
T. Meyer , A. Unger, S. Althoff, W. Sextro, M. Brökelmann, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622–628.
LibreCat | DOI
 
[118]
2016 | Conference Paper | LibreCat-ID: 9967
Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems
S. Schulze, W. Sextro, S. Kohl, in: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1–11.
LibreCat
 
[117]
2016 | Conference Paper | LibreCat-ID: 9955
Shape-Dependent Transmittable Tangential Force of Wire Bond Tools
S. Althoff, T. Meyer, A. Unger, W. Sextro, F. Eacock, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110.
LibreCat | DOI
 
[116]
2015 | Conference Paper | LibreCat-ID: 9949
Advantages of reliability-adaptive system operation for maintenance planning
T. Meyer, T. Kaul, W. Sextro, in: Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 2015, pp. 940–945.
LibreCat | DOI
 
[115]
2015 | Journal Article | LibreCat-ID: 9944
Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, B. Zeqiri, Tm - Technisches Messen 82 (2015) 73–84.
LibreCat | DOI
 
[114]
2015 | Conference Paper | LibreCat-ID: 9951
Modeling and simulation of the ultrasonic wire bonding process
T. Meyer, A. Unger, S. Althoff, W. Sextro, M. Brökelmann, in: 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat | DOI
 
[113]
2015 | Conference Paper | LibreCat-ID: 9945
Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme
T. Kaul, T. Meyer, W. Sextro, in: J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 10. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2015, pp. 101–112.
LibreCat
 
[112]
2015 | Conference Paper | LibreCat-ID: 9952
A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties
F. Schulte, J. Neuhaus, W. Sextro, in: Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–1117.
LibreCat
 
[111]
2015 | Conference Paper | LibreCat-ID: 9946
Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems
T. Kaul, T. Meyer, W. Sextro, in: P. et al.} (Ed.), European Safety and Reliability Conference (ESREL2015), Taylor and Francis, London, 2015.
LibreCat | DOI
 
[110]
2015 | Conference Paper | LibreCat-ID: 9947
Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics
J.K. Kimotho, W. Sextro, in: Annual Conference of the Prognostics and Health Management Society 2015, 2015.
LibreCat
 
[109]
2015 | Conference Paper | LibreCat-ID: 9954
Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear
A. Unger, W. Sextro, T. Meyer, P. Eichwald, S. Althoff, F. Eacock, M. Brökelmann, in: 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat | DOI
 
[108]
2015 | Conference Paper | LibreCat-ID: 9950
Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme
T. Meyer, J.K. Kimotho, W. Sextro, in: 27. Tagung Technische Zuverl{\"a}ssigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverl{\"a}ssiger Produkte, Leonberg, 2015, pp. 111–122.
LibreCat
 
[107]
2015 | Conference Paper | LibreCat-ID: 9943
Improving the cleaning process in copper wire bonding by adapting bonding parameters
S. Althoff, A. Unger, W. Sextro, F. Eacock, in: 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6.
LibreCat | DOI
 
[106]
2014 | Book Chapter | LibreCat-ID: 9893
Introduction to Self-optimization and Dependability
A. Trächtler, C. Hölscher, C. Rasche, C. Priesterjahn, D. Zimmer, J. Henning Keßler, K. Stahl, K. Flaßkamp, M. Vaßholz, M. Krüger, M. Dellnitz, P. Iwanek, P. Reinold, P. Hartmann, T. Meyer, W. Sextro, in: J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 1–24.
LibreCat | DOI
 
[105]
2014 | Conference Paper | LibreCat-ID: 9879
PEM fuel cell prognostics using particle filter with model parameter adaptation
J.K. Kimotho, T. Meyer, W. Sextro, in: Prognostics and Health Management (PHM), 2014 IEEE Conference On, 2014, pp. 1–6.
LibreCat | DOI
 
[104]
2014 | Journal Article | LibreCat-ID: 9881 LibreCat | DOI
 
[103]
2014 | Journal Article | LibreCat-ID: 9874
Reliability analysis of ultrasonic power transducers
T. Hemsel, P. Bornmann, T. Morita, C. Sondermann-Wölke, W. Sextro, Archive of Applied Mechanics (2014) 1–7.
LibreCat | DOI
 
[102]
2014 | Book Chapter | LibreCat-ID: 9894
Case Study
A. Trächtler, B. Kleinjohann, C. Heinzemann, C. Rasche, C. Priesterjahn, D. Steenken, H. Wehrheim, J. Gausemeier, K. Flaßkamp, L. Kleinjohann, M. Krüger, P. Iwanek, P. Hartmann, R. Dorociak, S. Groesbrink, S. Ziegert, T. Meyer, W. Sextro, W. Schäfer, in: J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 173–188.
LibreCat | DOI
 
[101]
2014 | Journal Article | LibreCat-ID: 9882 LibreCat | DOI
 
[100]
2014 | Conference Paper | LibreCat-ID: 9868
Improving the bond quality of copper wire bonds using a friction model approach
S. Althoff, J. Neuhaus, T. Hemsel, W. Sextro, in: Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–1555.
LibreCat | DOI
 
[99]
2014 | Conference Paper | LibreCat-ID: 9887
Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements
J. Neuhaus, W. Sextro, in: G.R. Liu, Z.W. Guan (Eds.), Proceedings of the 5th International Conference on Computational Methods, ScienTech Publisher, 2014.
LibreCat
 
[98]
2014 | Conference Paper | LibreCat-ID: 9871
Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding
P. Eichwald, W. Sextro, S. Althof, F. Eacock, A. Unger, T. Meyer, K. Guth, in: Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856–861.
LibreCat | DOI
 
[97]
2014 | Conference Paper | LibreCat-ID: 9869
Self-Sensing Ultrasound Transducer for Cavitation Detection
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, B. Zeqiri, in: 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663–666.
LibreCat | DOI
 
[96]
2014 | Journal Article | LibreCat-ID: 9876
High-velocity operation of piezoelectric inertia motors: experimental validation
M. Hunstig, T. Hemsel, W. Sextro, Archive of Applied Mechanics (2014) 1–9.
LibreCat | DOI
 
[95]
2014 | Book Chapter | LibreCat-ID: 9883
Conclusion and Outlook
T. Meyer, C. Priesterjahn, W. Sextro, in: J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 189–190.
LibreCat | DOI
 
[94]
2014 | Journal Article | LibreCat-ID: 9888
Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications
S. Schulze, W. Sextro, F. Grüter, PAMM 14 (2014) 39–40.
LibreCat | DOI
 
[93]
2014 | Conference Paper | LibreCat-ID: 9890
Time-efficient analysis of nonlinear dynamic behavior.
C. Sprock, W. Sextro, in: Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, 2014, pp. 293–294.
LibreCat
 
[92]
2014 | Conference Paper | LibreCat-ID: 9895
Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds
A. Unger, W. Sextro, S. Althoff, P. Eichwald, T. Meyer, F. Eacock, M. Brökelmann, in: Proceedings of the 47th International Symposium on Microelectronics (IMAPS), San Diego, CA, US, 2014, pp. 289–294.
LibreCat
 
[91]
2014 | Conference Paper | LibreCat-ID: 9889
Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending
C. Sprock, W. Sextro, in: Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 2014, pp. 320–324.
LibreCat | DOI
 
[90]
2014 | Conference Paper | LibreCat-ID: 9891
Time-efficient analysis of nonlinear peak bending behavior.
C. Sprock, W. Sextro, in: Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 2014, pp. 1–8.
LibreCat
 
[89]
2014 | Conference Paper | LibreCat-ID: 9896
Data-driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding
A. Unger, W. Sextro, S. Althoff, T. Meyer, M. Brökelmann, in: Proceedings of 8th International Conference on Integrated Power Electronic Systems, 2014, pp. 175–180.
LibreCat
 
[88]
2014 | Book | LibreCat-ID: 9873
Dependability of Self-Optimizing Mechatronic Systems
J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro, Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014.
LibreCat
 
[87]
2014 | Journal Article | LibreCat-ID: 9885
Method to Identify Dependability Objectives in Multiobjective Optimization Problem
T. Meyer , C. Sondermann-Wölke, W. Sextro, Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence 15 (2014) 46–53.
LibreCat | DOI
 
[86]
2014 | Conference Paper | LibreCat-ID: 9880
An approach for feature extraction and selection from non-trending data for machinery prognosis
J.K. Kimotho, W. Sextro, in: Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, 2014.
LibreCat
 
[85]
2014 | Conference Paper | LibreCat-ID: 9892
Vibration Analysis of Mechanical Structures using Multisine Excitation Techniques
C. Sprock, W. Sextro, in: Proceedings of 31st Danubia-Adria Symposium. 2014, 2014.
LibreCat
 
[84]
2013 | Conference Paper | LibreCat-ID: 9797
A friction based approach for modeling wire bonding
S. Althoff, J. Neuhaus, T. Hemsel, W. Sextro, in: IMAPS 2013, 46th International Symposium on Microelectronics, Orlando (Florida), USA, 2013.
LibreCat | DOI
 
[83]
2013 | Conference Paper | LibreCat-ID: 9855
Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems
S. Kohl, A. Zuber, W. Sextro, in: Proc. Appl. Math. Mech., 2013, pp. 23–24.
LibreCat | DOI
 
[82]
2013 | Journal Article | LibreCat-ID: 9805
Stick-slip and slip-slip operation of piezoelectric inertia drives - Part I: Ideal Excitation.
M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical 200 (2013) 90–100.
LibreCat | DOI
 
[81]
2013 | Conference Paper | LibreCat-ID: 9801
Leistungs- und Bandbreitensteigerung von Energy-Harvesting-Generatoren für Energieautarke Systeme
M. Hunstig, W. Al-Ashtari, T. Hemsel, W. Sextro, in: J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 9. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2013, pp. 359–372.
LibreCat
 
[80]
2013 | Conference Paper | LibreCat-ID: 9799
Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding
P. Eichwald, W. Sextro, S. Althoff, F. Eacock, M. Schnietz, K. Guth, M. Brökelmann, in: 15th Electronics Packaging Technology Conference, 2013.
LibreCat | DOI
 
[79]
2013 | Journal Article | LibreCat-ID: 9794
Increasing the power of piezoelectric energy harvesters by magnetic stiffening
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures 24 (2013) 1332–1342.
LibreCat | DOI
 
[78]
2013 | Journal Article | LibreCat-ID: 9807
Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization
J.K. Kimotho, C. Sondermann-Wölke, T. Meyer, W. Sextro, Chemical Engineering Transactions 33 (2013) 619–624.
LibreCat | DOI
 
[77]
2013 | Conference Paper | LibreCat-ID: 9802
High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation
M. Hunstig, T. Hemsel, W. Sextro, in: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 2013, pp. 16–18.
LibreCat
 
[76]
2013 | Book | LibreCat-ID: 9857
Schwingungen
K. Magnus, K. Popp, W. Sextro, Schwingungen, Springer Verlag, 2013.
LibreCat
 
[75]
2013 | Journal Article | LibreCat-ID: 9795
Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical 200 (2013) 138–146.
LibreCat | DOI
 
[74]
2013 | Journal Article | LibreCat-ID: 9803
Modelling the friction contact in an inertia motor
M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures 24 (2013) 1380–1391.
LibreCat | DOI
 
[73]
2013 | Conference Paper | LibreCat-ID: 9858
Multiobjective Optimization including Safety of Operation Applied to a Linear Drive System
T. Meyer, C. Hölscher, M. Menke, W. Sextro, D. Zimmer, in: Proc. Appl. Math. Mech., 2013, pp. 483–484.
LibreCat | DOI
 
[72]
2013 | Journal Article | LibreCat-ID: 9808
Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation
J.K. Kimotho, C. Sondermann-Wölke, T. Meyer, W. Sextro, International Journal of Prognostics and Health Management 4 (2013).
LibreCat
 
[71]
2013 | Journal Article | LibreCat-ID: 9860
Controlling the Remaining Useful Lifetime using Self-Optimization
T. Meyer, C. Sondermann-Wölke, J.K. Kimotho, W. Sextro, Chemical Engineering Transactions 33 (2013) 625–630.
LibreCat | DOI
 
[70]
2013 | Conference Paper | LibreCat-ID: 9861
Bewertung der Zuverlässigkeit selbstoptimierender Systeme mit dem LARES-Framework
T. Meyer, C. Sondermann-Wölke, W. Sextro, M. Riedl, A. Gouberman, M. Siegle, in: J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 9. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2013, pp. 161–174.
LibreCat
 
[69]
2013 | Journal Article | LibreCat-ID: 9804
Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation
M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical 200 (2013) 79–89.
LibreCat | DOI
 
[68]
2013 | Conference Paper | LibreCat-ID: 9796
Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, in: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, Hannover, Germany, 2013, pp. 159–161.
LibreCat
 
[67]
2013 | Conference Paper | LibreCat-ID: 9859
Increasing Intelligent Systems' Reliability by Using Reconfiguration
T. Meyer , J. Henning Keßler, W. Sextro, A. Trächtler, in: Proceedings of the Annual Reliability and Maintainability Symposium (RAMS), Orlando, FL, 2013.
LibreCat | DOI
 
[66]
2012 | Journal Article | LibreCat-ID: 9806
Analysis of different operation modes for inertia motors
M. Hunstig, T. Hemsel, W. Sextro, ACTUATOR 2012 Conference Proceedings (2012) 761–764.
LibreCat
 
[65]
2012 | Journal Article | LibreCat-ID: 9781
Frequency tuning of piezoelectric energy harvesters by magnetic force
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Smart Materials and Structures 21 (2012) 035019.
LibreCat
 
[64]
2012 | Journal Article | LibreCat-ID: 9782
Analytical determination of characteristic frequencies and equivalent circuit parameters of a piezoelectric bimorph
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures 23 (2012) 15–23.
LibreCat | DOI
 
[63]
2012 | Conference Paper | LibreCat-ID: 9787
Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie
S. Kohl, W. Sextro, A. Zuber, in: 8. Tag Des Fahrwerks, Aachen, 2012, Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen, 2012, pp. 38–60.
LibreCat
 
[62]
2012 | Conference Paper | LibreCat-ID: 9783
Non-perturbing cavitation detection / monitoring in sonochemical reactors
P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, T. Morita, in: Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–1144.
LibreCat | DOI
 
 
[60]
2012 | Conference Paper | LibreCat-ID: 9791
Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution
C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, W. Sextro, in: Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012), Helsinki, Finland, 2012.
LibreCat
 
[59]
2011 | Conference Paper | LibreCat-ID: 9768
Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies
O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, W. Sextro, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2011, pp. 99–110.
LibreCat
 
[58]
2011 | Conference Paper | LibreCat-ID: 9771
Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs
C. Sondermann-Wölke, W. Sextro, P. Reinold, A. Trächtler, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2011, pp. 291–302.
LibreCat
 
[57]
2011 | Journal Article | LibreCat-ID: 9772
Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature
C. Tomberger, P. Dietmaier, W. Sextro, K. Six, Wear 271 (2011) 2–12.
LibreCat | DOI
 
[56]
2010 | Journal Article | LibreCat-ID: 9747
Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen
J.S. Hölzl, W. Sextro, PAMM 10 (2010) 247–248.
LibreCat | DOI
 
[55]
2010 | Conference Paper | LibreCat-ID: 9754
Improving the Performance of Piezoelectric Inertia Motors
M. Hunstig, T. Hemsel, W. Sextro, in: ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–661.
LibreCat
 
[54]
2010 | Journal Article | LibreCat-ID: 9761
Integration of Condition Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance Module
C. Sondermann-Wölke, W. Sextro, International Journal On Advances in Intelligent Systems 3 (2010) 65–74.
LibreCat
 
[53]
2010 | Conference Paper | LibreCat-ID: 9762
Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls
C. Sondermann-Wölke, W. Sextro, J. Geisler, A. Trächtler, in: J. Gausemeier, F.J. Rammig, A. Trächtler (Eds.), Entwurf Mechatronischer Systeme, Paderborn, 2010, pp. 411–420.
LibreCat
 
[52]
2010 | Journal Article | LibreCat-ID: 9748
Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces
J.S. Hölzl, W. Sextro, SAE International Journal of Passenger Cars- Mechanical Systems (2010) 929–935.
LibreCat | DOI
 
[51]
2010 | Conference Paper | LibreCat-ID: 9763
Increasing the reliability of a self-optimizing railway guidance system
C. Sondermann-Wölke, J. Geisler, W. Sextro, in: Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6.
LibreCat | DOI
 
[50]
2010 | Journal Article | LibreCat-ID: 9764
Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den Kraftschluss zwischen Rad und Schiene
C. Tomberger, P. Dietmaier, R. Martin, W. Sextro, K. Six, ZEVrail 134 (2010) 127–135.
LibreCat
 
[49]
2010 | Conference Paper | LibreCat-ID: 9753
Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren
M. Hunstig, T. Hemsel, W. Sextro, in: J. Gausemeier, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 7. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2010, pp. 129–141.
LibreCat
 
[48]
2010 | Conference Paper | LibreCat-ID: 9760
Guideline for the dependability-oriented design of self-optimizing systems
C. Sondermann-Wölke, T. Hemsel, W. Sextro, J. Gausemeier, S. Pook, in: Industrial Informatics (INDIN), 2010 8th IEEE International Conference On, 2010, pp. 739–744.
LibreCat | DOI
 
[47]
2009 | Conference Paper | LibreCat-ID: 9742
Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules
C. Sondermann-Wölke, W. Sextro, in: Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:, 2009, pp. 15–20.
LibreCat | DOI
 
[46]
2007 | Conference Paper | LibreCat-ID: 9560
Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe
A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, J. Neges, in: 27. Internationales Mju-Symposium/Bremsen-Fachtagung, VDI Verlag GmbH, Bad Neuenahr, 2007, pp. 29–49.
LibreCat
 
[45]
2007 | Conference Paper | LibreCat-ID: 9561
Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc
A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, J. Neges, in: 27. Internationales Mju-Symposium/Bremsen-Fachtagung, VDI Verlag GmbH, Bad Neuenahr, 2007, pp. 144–163.
LibreCat
 
[44]
2007 | Journal Article | LibreCat-ID: 9567
On Nonlinear Forced Vibration of Shrouded Turbine Blades
J. Szwedowicz, R. Visser, W. Sextro, P.A. Masserey, Journal of Turbomachinery 130 (2007) 011002–011002.
LibreCat
 
[43]
2007 | Conference Paper | LibreCat-ID: 9563
Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten
A. Genzo, W. Sextro, L. Panning, in: VDI-Berichte, VDI Verlag GmbH, D{\"u}sseldorf, 2007, pp. 147–161.
LibreCat
 
[42]
2006 | Conference Paper | LibreCat-ID: 9542
Error-Workspace Analysis of Plane Mechanisms
A. Hofmeisterro, W. Sextro, O. Röschel, in: Proceedings of EUCOMES, the First European Conference on Mechanism Science, Obergurgl, {\"O}sterreich, 2006, pp. 1–12.
LibreCat
 
[41]
2006 | Conference Paper | LibreCat-ID: 9535
Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts
A. Genzo, W. Sextro, in: Proceedings of ISMA - International Conference on Noise and Vibration Engineering, 2006, pp. 51–52.
LibreCat
 
[40]
2006 | Book Chapter | LibreCat-ID: 9536
Unsteady rolling contact of rubber wheels
F. Gutzeit, W. Sextro, M. Kröger, in: P. Wriggers, U. Nackenhorst (Eds.), Analysis and Simulation of Contact Problems, Springer Berlin Heidelberg, 2006, pp. 261–270.
LibreCat | DOI
 
[39]
2006 | Book Chapter | LibreCat-ID: 9551
Contact behaviour of a sliding rubber element
W. Sextro, P. Moldenhauer, M. Wangenheim, M. Lindner, M. Kröger, in: P. Wriggers, U. Nackenhorst (Eds.), Analysis and Simulation of Contact Problems, Springer Berlin Heidelberg, 2006, pp. 243–252.
LibreCat | DOI
 
[38]
2005 | Journal Article | LibreCat-ID: 9526 LibreCat | DOI
 
[37]
2005 | Journal Article | LibreCat-ID: 9266 LibreCat | DOI
 
[36]
2005 | Journal Article | LibreCat-ID: 9529
Unkontrollierbare Bewegungen ebener Mechanismen mit Gelenkspiel
A. Hofmeister, W. Sextro, O. Röschel, PAMM 5 (2005) 201–202.
LibreCat | DOI
 
[35]
2004 | Conference Paper | LibreCat-ID: 9523
Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application
L. Panning, K. Popp, W. Sextro, F. Götting, in: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, Vienna, Austria, 2004, pp. 269–280.
LibreCat | DOI
 
[34]
2004 | Journal Article | LibreCat-ID: 9520
Hysteretic Friction of a Sliding Rubber Element
M. Lindner, W. Sextro, K. Popp, PAMM 4 (2004) 101–102.
LibreCat | DOI
 
[33]
2004 | Conference Paper | LibreCat-ID: 8952
Systematic mistuning of bladed disk assemblies with friction contacts
F. Götting, W. Sextro, L. Panning, K. Popp, in: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2004, pp. 257–267.
LibreCat
 
[32]
2003 | Conference Paper | LibreCat-ID: 8941
On forced vibration of shrouded turbine blades
J. Szwedowicz, W. Sextro, R. Visser, P.. Masserey, in: ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference, Atlanta, Georgia, USA, 2003.
LibreCat | DOI
 
[31]
2003 | Journal Article | LibreCat-ID: 8939
Vibration Damping by Friction Forces -Theory and Applications
K. Popp, L. Panning, W. Sextro, Journal of Vibration and Control 9 (2003) 419–448.
LibreCat
 
[30]
2003 | Journal Article | LibreCat-ID: 8934
Erzwungene Schwingungen von elastischen Mehrkörpersystemen mit Reibkontakten
A. Genzo, W. Sextro, K. Popp, PAMM 2 (2003) 120–121.
LibreCat | DOI
 
[29]
2003 | Journal Article | LibreCat-ID: 8937
Design of Friction Dampers for Mistuned Bladed Disks
L. Panning, W. Sextro, K. Popp, PAMM 3 (2003) 118–119.
LibreCat | DOI
 
[28]
2003 | Conference Paper | LibreCat-ID: 8933
Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen
F. Götting, W. Sextro, L. Panning, K. Popp, in: H. Irretier , R. Nordmann, H. Springer (Eds.), Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Darmstadt, Vieweg-Verlag, 2003, pp. 201–210.
LibreCat
 
[27]
2003 | Journal Article | LibreCat-ID: 8938
Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers
L. Panning, W. Sextro, K. Popp, International Journal of Rotating Machinery 9 (2003) 219–228.
LibreCat
 
[26]
2003 | Conference Paper | LibreCat-ID: 8940
Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen am Beispiel von Turbomaschinenschaufeln
W. Sextro, K. Popp, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW), Frankfurt am Main, Germany, 2003, p. 40.
LibreCat
 
[25]
2002 | Conference Paper | LibreCat-ID: 8928
Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with respect to Friction Damping
L. Panning, W. Sextro, K. Popp, in: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, Amsterdam, Niederlande, 2002.
LibreCat
 
[24]
2002 | Conference Paper | LibreCat-ID: 8929
Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers
L. Panning, W. Sextro, K. Popp, in: Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC, Honolulu, Hawaii, USA, 2002.
LibreCat
 
[23]
2002 | Conference Paper | LibreCat-ID: 8931
Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts
W. Sextro, L. Panning, F. Götting, in: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, Amsterdam, Niederlande, 2002.
LibreCat
 
[22]
2002 | Conference Paper | LibreCat-ID: 8932
Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen
W. Sextro, K. Popp, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, Frankfurt am Main, Germany, 2002, pp. 157–183.
LibreCat
 
[21]
2001 | Journal Article | LibreCat-ID: 8922
Heat and Wear Generation for Rolling Contacts
W. Sextro, Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 81 (2001) 225–226.
LibreCat
 
[20]
2001 | Conference Paper | LibreCat-ID: 8923
Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction
W. Sextro, in: ASME Design Engineering Technical Conferences, Pittsburgh, Pennsylvania, USA, 2001, pp. 1–12.
LibreCat
 
[19]
2001 | Journal Article | LibreCat-ID: 8924
Localization in Nonlinear Mistuned Systems with Cyclic Symmetry
W. Sextro, K. Popp, T. Krzyzynski, Nonlinear Dynamics 25 (2001) 207–220.
LibreCat | DOI
 
[18]
2001 | Conference Paper | LibreCat-ID: 8921
Schwingungsanalyse verstimmter Schaufelkränze mit Reibelementen
L. Panning, W. Sextro, K. Popp, in: H. Irretier, R. Nordmann, H. Springer (Eds.), Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Wien, Vieweg-Verlag, 2001, pp. 297–306.
LibreCat
 
[17]
2000 | Conference Paper | LibreCat-ID: 8920
The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification
W. Sextro, in: International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, Munich, Germany, 2000, pp. 1–8.
LibreCat
 
[16]
2000 | Journal Article | LibreCat-ID: 8918
On some regularities in dynamic response of cyclic periodic structures
T. Krzyzynski, K. Popp, W. Sextro, Chaos, Solitons \& Fractals 11 (2000) 1597–1609.
LibreCat | DOI
 
[15]
2000 | Conference Paper | LibreCat-ID: 8919
Optimization of Interblade Friction Damper
L. Panning, W. Sextro, K. Popp, in: International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, Munich, Germany, 2000, pp. 1–8.
LibreCat
 
[14]
1999 | Conference Paper | LibreCat-ID: 8910
Experimental verification of a non-Hertzian contact model
W. Sextro, in: International Conference on Computational Methods in Contact Mechanics, 1999, pp. 181–190.
LibreCat
 
[13]
1999 | Conference Paper | LibreCat-ID: 8911
Forced Vibration of Elastic Structures with Friction Contacts
W. Sextro, in: ASME Design Engineering Technical Conferences, Las Vegas, Nevada, USA, 1999, pp. 1–10.
LibreCat
 
[12]
1999 | Conference Paper | LibreCat-ID: 8909
Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz
K. Popp, W. Sextro, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, Heidelberg, 1999, pp. 21–38.
LibreCat
 
[11]
1999 | Journal Article | LibreCat-ID: 8912
Ein ebenes Reibkontaktmodell zur Berechnung von Schaufelschwingungen mit Reibelementen
W. Sextro, K. Popp, Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 79 (1999) 311–312.
LibreCat
 
[10]
1999 | Conference Paper | LibreCat-ID: 8913
Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz
W. Sextro, K. Popp, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW), Frankfurt am Main, Germany, 1999, p. 56.
LibreCat
 
[9]
1998 | Conference Paper | LibreCat-ID: 8908
Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers
W. Sextro, K. Popp, I. Wolter, in: The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7, Honolulu, Hawaii, USA, 1998, pp. 621–630.
LibreCat
 
[8]
1998 | Conference Paper | LibreCat-ID: 8907
Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers
W. Sextro, K. Popp, I. Wolter, in: International Congress on Combustion Engines, Proceedings of the 22nd CIMAC, Kopenhagen, D{\"a}nemark, 1998, pp. 257–270.
LibreCat
 
[7]
1997 | Conference Paper | LibreCat-ID: 8903
Schwingungsverhalten von Schaufelkränzen mit Reibelementen bei Frequenzverstimmung
W. Sextro, in: VDI-Reihe, VDI-Verlag, Düsseldorf, 1997.
LibreCat
 
[6]
1997 | Conference Paper | LibreCat-ID: 8904
Improved reliability of bladed disks due to friction dampers
W. Sextro, K. Popp, I. Wolter, in: The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition, 1997.
LibreCat
 
[5]
1997 | Conference Paper | LibreCat-ID: 8902
Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen
K. Popp, W. Sextro, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, Frankfurt am Main, Germany, 1997, pp. 131–142.
LibreCat
 
[4]
1996 | Conference Paper | LibreCat-ID: 8896
Schwingungsverhalten eines Schaufelkranzes mit Reibelementen bei Frequenzverstimmung
K. Popp, W. Sextro, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, Frankfurt am Main, Germany, 1996, pp. 53–76.
LibreCat
 
[3]
1996 | Conference Paper | LibreCat-ID: 8897
Dynamical Behaviour of a Bladed Disk with Friction Dampers
K. Popp, W. Sextro, in: The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH, Prag, 1996, pp. 157–183.
LibreCat
 
[2]
1993 | Journal Article | LibreCat-ID: 8895
Static Behaviour of Drill Strings in Curved Boreholes
W. Sextro, B. Schmalhorst, Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 73 (1993) 255–257.
LibreCat
 
[1]
1991 | Book Chapter | LibreCat-ID: 8894
Bifurcations in Dynamic Systems with Dry Friction
P. Stelter, W. Sextro, in: R. Seydel, F.W. Schneider, T. Küpper, H. Troger (Eds.), Bifurcation and Chaos: Analysis, Algorithms, Applications, Birkhäuser Basel, 1991, pp. 343–347.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Export / Embed

152 Publications

Mark all

[152]
2019 | Book | LibreCat-ID: 10002
Intelligente Herstellung zuverlässiger Kupferbondverbindungen
W. Sextro, M. Brökelmann, Intelligente Herstellung Zuverlässiger Kupferbondverbindungen, Springer Verlag, 2019.
LibreCat | DOI
 
[151]
2019 | Conference Paper | LibreCat-ID: 10255
Konstruktion und Zustandsüberwachung eines Gummi-Metall-Teils mit integriertem Thermoelement
A. Bender, K. Reinke, W. Sextro, in: 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, Bremen 2019, 2019, pp. 241–248.
LibreCat
 
[150]
2019 | Conference Paper | LibreCat-ID: 10257
Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung
T. Kaul, J. Hentze, W. Sextro, I. Gräßler, in: Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
 
[149]
2019 | Journal Article | LibreCat-ID: 10334
Using complex multi-dimensional vibration trajectories in ultrasonic bonding and welding
R. Schemmel, T. Hemsel, C. Dymel, M. Hunstig, M. Brökelmann, W. Sextro, Sensors and Actuators A: Physical 295 (2019) 653–662.
LibreCat | DOI
 
[148]
2019 | Conference Paper | LibreCat-ID: 10258 LibreCat
 
[147]
2018 | Conference Paper | LibreCat-ID: 9987
A particle filtering approach for temperature based prognostics
A. Bender, W. Sextro, in: Safety and Reliability – Safe Societies in a Changing World, Trondheim, Norway, 2018, pp. 1025–1033.
LibreCat
 
[146]
2018 | Conference Paper | LibreCat-ID: 9999
Intelligent Production of Wire Bonds using Multi-Objective Optimization – Insights, Opportunities and Challenges
A. Unger, M. Hunstig, T. Meyer, M. Brökelmann, W. Sextro, in: In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, 2018.
LibreCat | DOI
 
[145]
2018 | Book | LibreCat-ID: 9995
Steigerung der Intelligenz mechatronischer Systeme
T. Meyer, T. Kaul, J.K. Kimotho, W. Sextro, Steigerung Der Intelligenz Mechatronischer Systeme, Springer Nature Switzerland AG. Part of Springer Nature., 2018.
LibreCat
 
[144]
2018 | Journal Article | LibreCat-ID: 9990
Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders
P. Dunst, P. Bornmann, T. Hemsel, W. Littmann, W. Sextro, ACTUATOR 2018; 16th International Conference on New Actuators (2018) 142–145.
LibreCat
 
[143]
2018 | Journal Article | LibreCat-ID: 9991
Vibration-Assisted Handling of Dry Fine Powders
P. Dunst, P. Bornmann, T. Hemsel, W. Sextro, Actuators 2018, 7(2). (2018) 1–11.
LibreCat | DOI
 
[142]
2018 | Conference Paper | LibreCat-ID: 9992
Numerical and statistical investigation of weld formation in a novel two-dimensional copper-copper bonding process
C. Dymel, P. Eichwald, R. Schemmel, T. Hemsel, M. Brökelmann, M. Hunstig, W. Sextro, in: (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1–6.
LibreCat
 
[141]
2018 | Conference Paper | LibreCat-ID: 9998
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS IN ULTRASONIC HEAVY WIRE BONDING
R. Schemmel, T. Hemsel, W. Sextro, in: 6th European Conference on Computational Mechanics (ECCM 6), Glasgow, UK, 2018, pp. 1–12.
LibreCat
 
[140]
2018 | Conference Paper | LibreCat-ID: 9993
Experimental investigations on the impact of bond process parameters in two-dimensional ultrasonic copper bonding
C. Dymel, R. Schemmel, T. Hemsel, W. Sextro, M. Brökelmann, M. Hunstig, in: (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.
LibreCat
 
[139]
2017 | Conference Paper | LibreCat-ID: 9982
MoRFUS: Mobile Reinigungseinheit für Förderketten basierend auf Ultraschall
R. Schemmel, T. Hemsel, W. Sextro, in: 43. Deutsche Jahrestagung Für Akustik, Kiel 2017, 2017, pp. 611–614.
LibreCat
 
[138]
2017 | Conference Paper | LibreCat-ID: 9970
Modellbasierte Prognose der nutzbaren Restlebensdauer von Gummi-Metall-Elementen
A. Bender, J.K. Kimotho, S. Kohl, W. Sextro, K. Reinke, in: 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123–125.
LibreCat
 
[137]
2017 | Conference Paper | LibreCat-ID: 9969
Entwicklung eines Condition Monitoring Systems für Gummi-Metall-Elemente
A. Bender, T. Kaul, W. Sextro, in: Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, Wissenschaftsforum Intelligente Technische Systeme (WInTeSys) 2017, 2017, pp. 347–358.
LibreCat
 
[136]
2017 | Conference Paper | LibreCat-ID: 9971
Neuartiges Konzept zur Lebensdauerprognose von Gummi-Metall-Elementen
A. Bender, W. Sextro, K. Reinke, in: VDI-Berichte 2301, 2017, pp. 49–60.
LibreCat
 
[135]
2017 | Conference Paper | LibreCat-ID: 9983
Model based optimization of dynamics in adaptive headlamps
S. Schulze, W. Sextro, K. Kister, in: Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
 
[134]
2017 | Journal Article | LibreCat-ID: 9976
Formulation of reliability-related objective functions for design of intelligent mechatronic systems
T. Kaul, T. Meyer, W. Sextro, SAGE Journals Vol. 231(4) (2017) 390–399.
LibreCat | DOI
 
[133]
2017 | Journal Article | LibreCat-ID: 9972
Analysis of pipe vibration in an ultrasonic powder transportationsystem
P. Dunst, T. Hemsel, W. Sextro, Elsevier Sensors and Actuators A 263 (2017) 733–736.
LibreCat
 
[132]
2017 | Conference Paper | LibreCat-ID: 9985
Entwicklung verlässlicher, intelligenter Systeme
W. Sextro, T. Meyer, T. Kaul, J.K. Kimotho, in: VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte., Leonberg 2017, 2017, pp. 17–30.
LibreCat
 
[131]
2017 | Journal Article | LibreCat-ID: 9973
Multi-dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design
P. Eichwald, S. Althoff, R. Schemmel, W. Sextro, A. Unger, M. Brökelmann, M. Hunstig, IMAPSource Vol. 2017, No. 1 (2017).
LibreCat
 
[130]
2017 | Conference Paper | LibreCat-ID: 9978
Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing
J.K. Kimotho, W. Sextro, T. Hemsel, in: IEEE Transactions on Reliability, 2017, pp. 1–10.
LibreCat | DOI
 
 
[128]
2017 | Conference Paper | LibreCat-ID: 9974
INTEGRATED MODELING OF BEHAVIOR AND RELIABILITY IN SYSTEM DEVELOPMENT
J. Hentze, T. Kaul, I. Grässler, W. Sextro, in: ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, 2017, pp. 385–394.
LibreCat
 
 
[126]
2016 | Conference Paper | LibreCat-ID: 9963
Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis using ADAMS
S. Kohl, W. Sextro, S. Schulze, in: The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., Cyberjaya, Malaysia, 2016, 2016, pp. 1–12.
LibreCat
 
[125]
2016 | Conference Paper | LibreCat-ID: 9968
Validated Simulation of the Ultrasonic Wire Bonding Process
A. Unger, R. Schemmel, T. Meyer, F. Eacock, P. Eichwald, S. Althoff, W. Sextro, M. Brökelmann, M. Hunstig, K. Guth, in: Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, IEEE CPMT Symposium Japan, 2016, pp. 251–254.
LibreCat
 
[124]
2016 | Journal Article | LibreCat-ID: 9957
Kupferbondverbindungen intelligent herstellen
M. Brökelmann, A. Unger, T. Meyer, S. Althoff, W. Sextro, M. Hunstig, F. Biermann, K. Guth, Wt-Online 7/8 (2016) 512–519.
LibreCat
 
[123]
2016 | Conference Paper | LibreCat-ID: 9964
Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification
C. Lessmeier, J.K. Kimotho, D. Zimmer, W. Sextro, in: European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
 
[122]
2016 | Conference Paper | LibreCat-ID: 9958
Transportation of dry fine powders by coordinated friction manipulation
P. Dunst, W. Sextro, P. Bornmann, T. Hemsel, W. Littmann, in: PAMM Proc. Appl. Math. Mech. 16, Braunschweig, 2016, pp. 635–636.
LibreCat | DOI
 
[121]
2016 | Conference Paper | LibreCat-ID: 9960
Micro Wear Modeling in Copper Wire Wedge Bonding
P. Eichwald, A. Unger, F. Eacock, S. Althoff, W. Sextro, K. Guth, M. Brökelmann, in: IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
 
[120]
2016 | Conference Paper | LibreCat-ID: 9961
Modeling of Complex Redundancy in Technical Systems with Bayesian Networks
T. Kaul, T. Meyer, W. Sextro, in: Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
 
[119]
2016 | Conference Paper | LibreCat-ID: 9966
Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation
T. Meyer , A. Unger, S. Althoff, W. Sextro, M. Brökelmann, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622–628.
LibreCat | DOI
 
[118]
2016 | Conference Paper | LibreCat-ID: 9967
Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems
S. Schulze, W. Sextro, S. Kohl, in: 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1–11.
LibreCat
 
[117]
2016 | Conference Paper | LibreCat-ID: 9955
Shape-Dependent Transmittable Tangential Force of Wire Bond Tools
S. Althoff, T. Meyer, A. Unger, W. Sextro, F. Eacock, in: IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–2110.
LibreCat | DOI
 
[116]
2015 | Conference Paper | LibreCat-ID: 9949
Advantages of reliability-adaptive system operation for maintenance planning
T. Meyer, T. Kaul, W. Sextro, in: Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 2015, pp. 940–945.
LibreCat | DOI
 
[115]
2015 | Journal Article | LibreCat-ID: 9944
Kavitationsdetektion mittels Self-Sensing-Ultraschallwandler
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, B. Zeqiri, Tm - Technisches Messen 82 (2015) 73–84.
LibreCat | DOI
 
[114]
2015 | Conference Paper | LibreCat-ID: 9951
Modeling and simulation of the ultrasonic wire bonding process
T. Meyer, A. Unger, S. Althoff, W. Sextro, M. Brökelmann, in: 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat | DOI
 
[113]
2015 | Conference Paper | LibreCat-ID: 9945
Integrierte Modellierung der Dynamik und der Verlässlichkeit komplexer mechatronischer Systeme
T. Kaul, T. Meyer, W. Sextro, in: J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 10. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2015, pp. 101–112.
LibreCat
 
[112]
2015 | Conference Paper | LibreCat-ID: 9952
A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties
F. Schulte, J. Neuhaus, W. Sextro, in: Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–1117.
LibreCat
 
[111]
2015 | Conference Paper | LibreCat-ID: 9946
Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems
T. Kaul, T. Meyer, W. Sextro, in: P. et al.} (Ed.), European Safety and Reliability Conference (ESREL2015), Taylor and Francis, London, 2015.
LibreCat | DOI
 
[110]
2015 | Conference Paper | LibreCat-ID: 9947
Comparison and ensemble of temperature-based and vibration-based methods for machinery prognostics
J.K. Kimotho, W. Sextro, in: Annual Conference of the Prognostics and Health Management Society 2015, 2015.
LibreCat
 
[109]
2015 | Conference Paper | LibreCat-ID: 9954
Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear
A. Unger, W. Sextro, T. Meyer, P. Eichwald, S. Althoff, F. Eacock, M. Brökelmann, in: 2015 17th Electronics Packaging Technology Conference, 2015.
LibreCat | DOI
 
[108]
2015 | Conference Paper | LibreCat-ID: 9950
Anforderungen an Condition-Monitoring-Verfahren zur Nutzung im zuverläsigkeitsgeregelten Betrieb adaptiver Systeme
T. Meyer, J.K. Kimotho, W. Sextro, in: 27. Tagung Technische Zuverl{\"a}ssigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverl{\"a}ssiger Produkte, Leonberg, 2015, pp. 111–122.
LibreCat
 
[107]
2015 | Conference Paper | LibreCat-ID: 9943
Improving the cleaning process in copper wire bonding by adapting bonding parameters
S. Althoff, A. Unger, W. Sextro, F. Eacock, in: 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6.
LibreCat | DOI
 
[106]
2014 | Book Chapter | LibreCat-ID: 9893
Introduction to Self-optimization and Dependability
A. Trächtler, C. Hölscher, C. Rasche, C. Priesterjahn, D. Zimmer, J. Henning Keßler, K. Stahl, K. Flaßkamp, M. Vaßholz, M. Krüger, M. Dellnitz, P. Iwanek, P. Reinold, P. Hartmann, T. Meyer, W. Sextro, in: J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 1–24.
LibreCat | DOI
 
[105]
2014 | Conference Paper | LibreCat-ID: 9879
PEM fuel cell prognostics using particle filter with model parameter adaptation
J.K. Kimotho, T. Meyer, W. Sextro, in: Prognostics and Health Management (PHM), 2014 IEEE Conference On, 2014, pp. 1–6.
LibreCat | DOI
 
[104]
2014 | Journal Article | LibreCat-ID: 9881 LibreCat | DOI
 
[103]
2014 | Journal Article | LibreCat-ID: 9874
Reliability analysis of ultrasonic power transducers
T. Hemsel, P. Bornmann, T. Morita, C. Sondermann-Wölke, W. Sextro, Archive of Applied Mechanics (2014) 1–7.
LibreCat | DOI
 
[102]
2014 | Book Chapter | LibreCat-ID: 9894
Case Study
A. Trächtler, B. Kleinjohann, C. Heinzemann, C. Rasche, C. Priesterjahn, D. Steenken, H. Wehrheim, J. Gausemeier, K. Flaßkamp, L. Kleinjohann, M. Krüger, P. Iwanek, P. Hartmann, R. Dorociak, S. Groesbrink, S. Ziegert, T. Meyer, W. Sextro, W. Schäfer, in: J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 173–188.
LibreCat | DOI
 
[101]
2014 | Journal Article | LibreCat-ID: 9882 LibreCat | DOI
 
[100]
2014 | Conference Paper | LibreCat-ID: 9868
Improving the bond quality of copper wire bonds using a friction model approach
S. Althoff, J. Neuhaus, T. Hemsel, W. Sextro, in: Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–1555.
LibreCat | DOI
 
[99]
2014 | Conference Paper | LibreCat-ID: 9887
Thermo-Mechanical Model for Wheel Rail Contact using Coupled Point Contact Elements
J. Neuhaus, W. Sextro, in: G.R. Liu, Z.W. Guan (Eds.), Proceedings of the 5th International Conference on Computational Methods, ScienTech Publisher, 2014.
LibreCat
 
[98]
2014 | Conference Paper | LibreCat-ID: 9871
Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding
P. Eichwald, W. Sextro, S. Althof, F. Eacock, A. Unger, T. Meyer, K. Guth, in: Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856–861.
LibreCat | DOI
 
[97]
2014 | Conference Paper | LibreCat-ID: 9869
Self-Sensing Ultrasound Transducer for Cavitation Detection
P. Bornmann, T. Hemsel, W. Sextro, G. Memoli, M. Hodnett, B. Zeqiri, in: 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663–666.
LibreCat | DOI
 
[96]
2014 | Journal Article | LibreCat-ID: 9876
High-velocity operation of piezoelectric inertia motors: experimental validation
M. Hunstig, T. Hemsel, W. Sextro, Archive of Applied Mechanics (2014) 1–9.
LibreCat | DOI
 
[95]
2014 | Book Chapter | LibreCat-ID: 9883
Conclusion and Outlook
T. Meyer, C. Priesterjahn, W. Sextro, in: J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro (Eds.), Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014, pp. 189–190.
LibreCat | DOI
 
[94]
2014 | Journal Article | LibreCat-ID: 9888
Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications
S. Schulze, W. Sextro, F. Grüter, PAMM 14 (2014) 39–40.
LibreCat | DOI
 
[93]
2014 | Conference Paper | LibreCat-ID: 9890
Time-efficient analysis of nonlinear dynamic behavior.
C. Sprock, W. Sextro, in: Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, 2014, pp. 293–294.
LibreCat
 
[92]
2014 | Conference Paper | LibreCat-ID: 9895
Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds
A. Unger, W. Sextro, S. Althoff, P. Eichwald, T. Meyer, F. Eacock, M. Brökelmann, in: Proceedings of the 47th International Symposium on Microelectronics (IMAPS), San Diego, CA, US, 2014, pp. 289–294.
LibreCat
 
[91]
2014 | Conference Paper | LibreCat-ID: 9889
Time-efficient dynamic analysis of structures exhibiting nonlinear peak bending
C. Sprock, W. Sextro, in: Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 2014, pp. 320–324.
LibreCat | DOI
 
[90]
2014 | Conference Paper | LibreCat-ID: 9891
Time-efficient analysis of nonlinear peak bending behavior.
C. Sprock, W. Sextro, in: Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 2014, pp. 1–8.
LibreCat
 
[89]
2014 | Conference Paper | LibreCat-ID: 9896
Data-driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding
A. Unger, W. Sextro, S. Althoff, T. Meyer, M. Brökelmann, in: Proceedings of 8th International Conference on Integrated Power Electronic Systems, 2014, pp. 175–180.
LibreCat
 
[88]
2014 | Book | LibreCat-ID: 9873
Dependability of Self-Optimizing Mechatronic Systems
J. Gausemeier, F. Josef Rammig, W. Schäfer, W. Sextro, Dependability of Self-Optimizing Mechatronic Systems, Springer Berlin Heidelberg, 2014.
LibreCat
 
[87]
2014 | Journal Article | LibreCat-ID: 9885
Method to Identify Dependability Objectives in Multiobjective Optimization Problem
T. Meyer , C. Sondermann-Wölke, W. Sextro, Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence 15 (2014) 46–53.
LibreCat | DOI
 
[86]
2014 | Conference Paper | LibreCat-ID: 9880
An approach for feature extraction and selection from non-trending data for machinery prognosis
J.K. Kimotho, W. Sextro, in: Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, 2014.
LibreCat
 
[85]
2014 | Conference Paper | LibreCat-ID: 9892
Vibration Analysis of Mechanical Structures using Multisine Excitation Techniques
C. Sprock, W. Sextro, in: Proceedings of 31st Danubia-Adria Symposium. 2014, 2014.
LibreCat
 
[84]
2013 | Conference Paper | LibreCat-ID: 9797
A friction based approach for modeling wire bonding
S. Althoff, J. Neuhaus, T. Hemsel, W. Sextro, in: IMAPS 2013, 46th International Symposium on Microelectronics, Orlando (Florida), USA, 2013.
LibreCat | DOI
 
[83]
2013 | Conference Paper | LibreCat-ID: 9855
Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems
S. Kohl, A. Zuber, W. Sextro, in: Proc. Appl. Math. Mech., 2013, pp. 23–24.
LibreCat | DOI
 
[82]
2013 | Journal Article | LibreCat-ID: 9805
Stick-slip and slip-slip operation of piezoelectric inertia drives - Part I: Ideal Excitation.
M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical 200 (2013) 90–100.
LibreCat | DOI
 
[81]
2013 | Conference Paper | LibreCat-ID: 9801
Leistungs- und Bandbreitensteigerung von Energy-Harvesting-Generatoren für Energieautarke Systeme
M. Hunstig, W. Al-Ashtari, T. Hemsel, W. Sextro, in: J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 9. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2013, pp. 359–372.
LibreCat
 
[80]
2013 | Conference Paper | LibreCat-ID: 9799
Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding
P. Eichwald, W. Sextro, S. Althoff, F. Eacock, M. Schnietz, K. Guth, M. Brökelmann, in: 15th Electronics Packaging Technology Conference, 2013.
LibreCat | DOI
 
[79]
2013 | Journal Article | LibreCat-ID: 9794
Increasing the power of piezoelectric energy harvesters by magnetic stiffening
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures 24 (2013) 1332–1342.
LibreCat | DOI
 
[78]
2013 | Journal Article | LibreCat-ID: 9807
Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization
J.K. Kimotho, C. Sondermann-Wölke, T. Meyer, W. Sextro, Chemical Engineering Transactions 33 (2013) 619–624.
LibreCat | DOI
 
[77]
2013 | Conference Paper | LibreCat-ID: 9802
High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation
M. Hunstig, T. Hemsel, W. Sextro, in: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 2013, pp. 16–18.
LibreCat
 
[76]
2013 | Book | LibreCat-ID: 9857
Schwingungen
K. Magnus, K. Popp, W. Sextro, Schwingungen, Springer Verlag, 2013.
LibreCat
 
[75]
2013 | Journal Article | LibreCat-ID: 9795
Enhanced energy harvesting using multiple piezoelectric elements: Theory and experiments
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical 200 (2013) 138–146.
LibreCat | DOI
 
[74]
2013 | Journal Article | LibreCat-ID: 9803
Modelling the friction contact in an inertia motor
M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures 24 (2013) 1380–1391.
LibreCat | DOI
 
[73]
2013 | Conference Paper | LibreCat-ID: 9858
Multiobjective Optimization including Safety of Operation Applied to a Linear Drive System
T. Meyer, C. Hölscher, M. Menke, W. Sextro, D. Zimmer, in: Proc. Appl. Math. Mech., 2013, pp. 483–484.
LibreCat | DOI
 
[72]
2013 | Journal Article | LibreCat-ID: 9808
Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation
J.K. Kimotho, C. Sondermann-Wölke, T. Meyer, W. Sextro, International Journal of Prognostics and Health Management 4 (2013).
LibreCat
 
[71]
2013 | Journal Article | LibreCat-ID: 9860
Controlling the Remaining Useful Lifetime using Self-Optimization
T. Meyer, C. Sondermann-Wölke, J.K. Kimotho, W. Sextro, Chemical Engineering Transactions 33 (2013) 625–630.
LibreCat | DOI
 
[70]
2013 | Conference Paper | LibreCat-ID: 9861
Bewertung der Zuverlässigkeit selbstoptimierender Systeme mit dem LARES-Framework
T. Meyer, C. Sondermann-Wölke, W. Sextro, M. Riedl, A. Gouberman, M. Siegle, in: J. Gausemeier, R. Dumitrescu, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 9. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2013, pp. 161–174.
LibreCat
 
[69]
2013 | Journal Article | LibreCat-ID: 9804
Stick-slip and slip-slip operation of piezoelectric inertia drives - Part II: Frequency-limited excitation
M. Hunstig, T. Hemsel, W. Sextro, Sensors and Actuators A: Physical 200 (2013) 79–89.
LibreCat | DOI
 
[68]
2013 | Conference Paper | LibreCat-ID: 9796
Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, in: Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, Hannover, Germany, 2013, pp. 159–161.
LibreCat
 
[67]
2013 | Conference Paper | LibreCat-ID: 9859
Increasing Intelligent Systems' Reliability by Using Reconfiguration
T. Meyer , J. Henning Keßler, W. Sextro, A. Trächtler, in: Proceedings of the Annual Reliability and Maintainability Symposium (RAMS), Orlando, FL, 2013.
LibreCat | DOI
 
[66]
2012 | Journal Article | LibreCat-ID: 9806
Analysis of different operation modes for inertia motors
M. Hunstig, T. Hemsel, W. Sextro, ACTUATOR 2012 Conference Proceedings (2012) 761–764.
LibreCat
 
[65]
2012 | Journal Article | LibreCat-ID: 9781
Frequency tuning of piezoelectric energy harvesters by magnetic force
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Smart Materials and Structures 21 (2012) 035019.
LibreCat
 
[64]
2012 | Journal Article | LibreCat-ID: 9782
Analytical determination of characteristic frequencies and equivalent circuit parameters of a piezoelectric bimorph
W. Al-Ashtari, M. Hunstig, T. Hemsel, W. Sextro, Journal of Intelligent Material Systems and Structures 23 (2012) 15–23.
LibreCat | DOI
 
[63]
2012 | Conference Paper | LibreCat-ID: 9787
Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie
S. Kohl, W. Sextro, A. Zuber, in: 8. Tag Des Fahrwerks, Aachen, 2012, Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen, 2012, pp. 38–60.
LibreCat
 
[62]
2012 | Conference Paper | LibreCat-ID: 9783
Non-perturbing cavitation detection / monitoring in sonochemical reactors
P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, T. Morita, in: Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–1144.
LibreCat | DOI
 
 
[60]
2012 | Conference Paper | LibreCat-ID: 9791
Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution
C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, W. Sextro, in: Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012), Helsinki, Finland, 2012.
LibreCat
 
[59]
2011 | Conference Paper | LibreCat-ID: 9768
Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies
O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, W. Sextro, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2011, pp. 99–110.
LibreCat
 
[58]
2011 | Conference Paper | LibreCat-ID: 9771
Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs
C. Sondermann-Wölke, W. Sextro, P. Reinold, A. Trächtler, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2011, pp. 291–302.
LibreCat
 
[57]
2011 | Journal Article | LibreCat-ID: 9772
Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature
C. Tomberger, P. Dietmaier, W. Sextro, K. Six, Wear 271 (2011) 2–12.
LibreCat | DOI
 
[56]
2010 | Journal Article | LibreCat-ID: 9747
Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen
J.S. Hölzl, W. Sextro, PAMM 10 (2010) 247–248.
LibreCat | DOI
 
[55]
2010 | Conference Paper | LibreCat-ID: 9754
Improving the Performance of Piezoelectric Inertia Motors
M. Hunstig, T. Hemsel, W. Sextro, in: ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–661.
LibreCat
 
[54]
2010 | Journal Article | LibreCat-ID: 9761
Integration of Condition Monitoring in Self-optimizing Function Modules Applied to the Active Railway Guidance Module
C. Sondermann-Wölke, W. Sextro, International Journal On Advances in Intelligent Systems 3 (2010) 65–74.
LibreCat
 
[53]
2010 | Conference Paper | LibreCat-ID: 9762
Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls
C. Sondermann-Wölke, W. Sextro, J. Geisler, A. Trächtler, in: J. Gausemeier, F.J. Rammig, A. Trächtler (Eds.), Entwurf Mechatronischer Systeme, Paderborn, 2010, pp. 411–420.
LibreCat
 
[52]
2010 | Journal Article | LibreCat-ID: 9748
Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces
J.S. Hölzl, W. Sextro, SAE International Journal of Passenger Cars- Mechanical Systems (2010) 929–935.
LibreCat | DOI
 
[51]
2010 | Conference Paper | LibreCat-ID: 9763
Increasing the reliability of a self-optimizing railway guidance system
C. Sondermann-Wölke, J. Geisler, W. Sextro, in: Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6.
LibreCat | DOI
 
[50]
2010 | Journal Article | LibreCat-ID: 9764
Einfluss von Oberflächenrauheit, fluiden Zwischenschichten und Kontakttemperaturen auf den Kraftschluss zwischen Rad und Schiene
C. Tomberger, P. Dietmaier, R. Martin, W. Sextro, K. Six, ZEVrail 134 (2010) 127–135.
LibreCat
 
[49]
2010 | Conference Paper | LibreCat-ID: 9753
Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren
M. Hunstig, T. Hemsel, W. Sextro, in: J. Gausemeier, F. Rammig, W. Schäfer, A. Trächtler (Eds.), 7. Paderborner Workshop Entwurf Mechatronischer Systeme, Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2010, pp. 129–141.
LibreCat
 
[48]
2010 | Conference Paper | LibreCat-ID: 9760
Guideline for the dependability-oriented design of self-optimizing systems
C. Sondermann-Wölke, T. Hemsel, W. Sextro, J. Gausemeier, S. Pook, in: Industrial Informatics (INDIN), 2010 8th IEEE International Conference On, 2010, pp. 739–744.
LibreCat | DOI
 
[47]
2009 | Conference Paper | LibreCat-ID: 9742
Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules
C. Sondermann-Wölke, W. Sextro, in: Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:, 2009, pp. 15–20.
LibreCat | DOI
 
[46]
2007 | Conference Paper | LibreCat-ID: 9560
Modellierung der Hysterese- und Adhäsionseffekte zwischen Bremsbelag und Bremsscheibe
A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, J. Neges, in: 27. Internationales Mju-Symposium/Bremsen-Fachtagung, VDI Verlag GmbH, Bad Neuenahr, 2007, pp. 29–49.
LibreCat
 
[45]
2007 | Conference Paper | LibreCat-ID: 9561
Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc
A. Tonchev, W. Hirschberg, W. Sextro, Z. Major, J. Neges, in: 27. Internationales Mju-Symposium/Bremsen-Fachtagung, VDI Verlag GmbH, Bad Neuenahr, 2007, pp. 144–163.
LibreCat
 
[44]
2007 | Journal Article | LibreCat-ID: 9567
On Nonlinear Forced Vibration of Shrouded Turbine Blades
J. Szwedowicz, R. Visser, W. Sextro, P.A. Masserey, Journal of Turbomachinery 130 (2007) 011002–011002.
LibreCat
 
[43]
2007 | Conference Paper | LibreCat-ID: 9563
Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten
A. Genzo, W. Sextro, L. Panning, in: VDI-Berichte, VDI Verlag GmbH, D{\"u}sseldorf, 2007, pp. 147–161.
LibreCat
 
[42]
2006 | Conference Paper | LibreCat-ID: 9542
Error-Workspace Analysis of Plane Mechanisms
A. Hofmeisterro, W. Sextro, O. Röschel, in: Proceedings of EUCOMES, the First European Conference on Mechanism Science, Obergurgl, {\"O}sterreich, 2006, pp. 1–12.
LibreCat
 
[41]
2006 | Conference Paper | LibreCat-ID: 9535
Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts
A. Genzo, W. Sextro, in: Proceedings of ISMA - International Conference on Noise and Vibration Engineering, 2006, pp. 51–52.
LibreCat
 
[40]
2006 | Book Chapter | LibreCat-ID: 9536
Unsteady rolling contact of rubber wheels
F. Gutzeit, W. Sextro, M. Kröger, in: P. Wriggers, U. Nackenhorst (Eds.), Analysis and Simulation of Contact Problems, Springer Berlin Heidelberg, 2006, pp. 261–270.
LibreCat | DOI
 
[39]
2006 | Book Chapter | LibreCat-ID: 9551
Contact behaviour of a sliding rubber element
W. Sextro, P. Moldenhauer, M. Wangenheim, M. Lindner, M. Kröger, in: P. Wriggers, U. Nackenhorst (Eds.), Analysis and Simulation of Contact Problems, Springer Berlin Heidelberg, 2006, pp. 243–252.
LibreCat | DOI
 
[38]
2005 | Journal Article | LibreCat-ID: 9526 LibreCat | DOI
 
[37]
2005 | Journal Article | LibreCat-ID: 9266 LibreCat | DOI
 
[36]
2005 | Journal Article | LibreCat-ID: 9529
Unkontrollierbare Bewegungen ebener Mechanismen mit Gelenkspiel
A. Hofmeister, W. Sextro, O. Röschel, PAMM 5 (2005) 201–202.
LibreCat | DOI
 
[35]
2004 | Conference Paper | LibreCat-ID: 9523
Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application
L. Panning, K. Popp, W. Sextro, F. Götting, in: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, Vienna, Austria, 2004, pp. 269–280.
LibreCat | DOI
 
[34]
2004 | Journal Article | LibreCat-ID: 9520
Hysteretic Friction of a Sliding Rubber Element
M. Lindner, W. Sextro, K. Popp, PAMM 4 (2004) 101–102.
LibreCat | DOI
 
[33]
2004 | Conference Paper | LibreCat-ID: 8952
Systematic mistuning of bladed disk assemblies with friction contacts
F. Götting, W. Sextro, L. Panning, K. Popp, in: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, 2004, pp. 257–267.
LibreCat
 
[32]
2003 | Conference Paper | LibreCat-ID: 8941
On forced vibration of shrouded turbine blades
J. Szwedowicz, W. Sextro, R. Visser, P.. Masserey, in: ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference, Atlanta, Georgia, USA, 2003.
LibreCat | DOI
 
[31]
2003 | Journal Article | LibreCat-ID: 8939
Vibration Damping by Friction Forces -Theory and Applications
K. Popp, L. Panning, W. Sextro, Journal of Vibration and Control 9 (2003) 419–448.
LibreCat
 
[30]
2003 | Journal Article | LibreCat-ID: 8934
Erzwungene Schwingungen von elastischen Mehrkörpersystemen mit Reibkontakten
A. Genzo, W. Sextro, K. Popp, PAMM 2 (2003) 120–121.
LibreCat | DOI
 
[29]
2003 | Journal Article | LibreCat-ID: 8937
Design of Friction Dampers for Mistuned Bladed Disks
L. Panning, W. Sextro, K. Popp, PAMM 3 (2003) 118–119.
LibreCat | DOI
 
[28]
2003 | Conference Paper | LibreCat-ID: 8933
Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen
F. Götting, W. Sextro, L. Panning, K. Popp, in: H. Irretier , R. Nordmann, H. Springer (Eds.), Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Darmstadt, Vieweg-Verlag, 2003, pp. 201–210.
LibreCat
 
[27]
2003 | Journal Article | LibreCat-ID: 8938
Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers
L. Panning, W. Sextro, K. Popp, International Journal of Rotating Machinery 9 (2003) 219–228.
LibreCat
 
[26]
2003 | Conference Paper | LibreCat-ID: 8940
Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen am Beispiel von Turbomaschinenschaufeln
W. Sextro, K. Popp, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW), Frankfurt am Main, Germany, 2003, p. 40.
LibreCat
 
[25]
2002 | Conference Paper | LibreCat-ID: 8928
Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with respect to Friction Damping
L. Panning, W. Sextro, K. Popp, in: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, Amsterdam, Niederlande, 2002.
LibreCat
 
[24]
2002 | Conference Paper | LibreCat-ID: 8929
Spatial dynamics of tuned and mistuned bladed disks with cylindrical and wedge-shaped friction dampers
L. Panning, W. Sextro, K. Popp, in: Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC, Honolulu, Hawaii, USA, 2002.
LibreCat
 
[23]
2002 | Conference Paper | LibreCat-ID: 8931
Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts
W. Sextro, L. Panning, F. Götting, in: Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, Amsterdam, Niederlande, 2002.
LibreCat
 
[22]
2002 | Conference Paper | LibreCat-ID: 8932
Optimierung des Schwingungsverhaltens elastischer Strukturen mit Reibfugen
W. Sextro, K. Popp, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, Frankfurt am Main, Germany, 2002, pp. 157–183.
LibreCat
 
[21]
2001 | Journal Article | LibreCat-ID: 8922
Heat and Wear Generation for Rolling Contacts
W. Sextro, Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 81 (2001) 225–226.
LibreCat
 
[20]
2001 | Conference Paper | LibreCat-ID: 8923
Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction
W. Sextro, in: ASME Design Engineering Technical Conferences, Pittsburgh, Pennsylvania, USA, 2001, pp. 1–12.
LibreCat
 
[19]
2001 | Journal Article | LibreCat-ID: 8924
Localization in Nonlinear Mistuned Systems with Cyclic Symmetry
W. Sextro, K. Popp, T. Krzyzynski, Nonlinear Dynamics 25 (2001) 207–220.
LibreCat | DOI
 
[18]
2001 | Conference Paper | LibreCat-ID: 8921
Schwingungsanalyse verstimmter Schaufelkränze mit Reibelementen
L. Panning, W. Sextro, K. Popp, in: H. Irretier, R. Nordmann, H. Springer (Eds.), Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Wien, Vieweg-Verlag, 2001, pp. 297–306.
LibreCat
 
[17]
2000 | Conference Paper | LibreCat-ID: 8920
The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification
W. Sextro, in: International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, Munich, Germany, 2000, pp. 1–8.
LibreCat
 
[16]
2000 | Journal Article | LibreCat-ID: 8918
On some regularities in dynamic response of cyclic periodic structures
T. Krzyzynski, K. Popp, W. Sextro, Chaos, Solitons \& Fractals 11 (2000) 1597–1609.
LibreCat | DOI
 
[15]
2000 | Conference Paper | LibreCat-ID: 8919
Optimization of Interblade Friction Damper
L. Panning, W. Sextro, K. Popp, in: International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, Munich, Germany, 2000, pp. 1–8.
LibreCat
 
[14]
1999 | Conference Paper | LibreCat-ID: 8910
Experimental verification of a non-Hertzian contact model
W. Sextro, in: International Conference on Computational Methods in Contact Mechanics, 1999, pp. 181–190.
LibreCat
 
[13]
1999 | Conference Paper | LibreCat-ID: 8911
Forced Vibration of Elastic Structures with Friction Contacts
W. Sextro, in: ASME Design Engineering Technical Conferences, Las Vegas, Nevada, USA, 1999, pp. 1–10.
LibreCat
 
[12]
1999 | Conference Paper | LibreCat-ID: 8909
Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz
K. Popp, W. Sextro, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, Heidelberg, 1999, pp. 21–38.
LibreCat
 
[11]
1999 | Journal Article | LibreCat-ID: 8912
Ein ebenes Reibkontaktmodell zur Berechnung von Schaufelschwingungen mit Reibelementen
W. Sextro, K. Popp, Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 79 (1999) 311–312.
LibreCat
 
[10]
1999 | Conference Paper | LibreCat-ID: 8913
Schwingungsanalyse von vorgespannten Schaufeln mit Deckplatten im Schaufelkranz
W. Sextro, K. Popp, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW), Frankfurt am Main, Germany, 1999, p. 56.
LibreCat
 
[9]
1998 | Conference Paper | LibreCat-ID: 8908
Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers
W. Sextro, K. Popp, I. Wolter, in: The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7, Honolulu, Hawaii, USA, 1998, pp. 621–630.
LibreCat
 
[8]
1998 | Conference Paper | LibreCat-ID: 8907
Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers
W. Sextro, K. Popp, I. Wolter, in: International Congress on Combustion Engines, Proceedings of the 22nd CIMAC, Kopenhagen, D{\"a}nemark, 1998, pp. 257–270.
LibreCat
 
[7]
1997 | Conference Paper | LibreCat-ID: 8903
Schwingungsverhalten von Schaufelkränzen mit Reibelementen bei Frequenzverstimmung
W. Sextro, in: VDI-Reihe, VDI-Verlag, Düsseldorf, 1997.
LibreCat
 
[6]
1997 | Conference Paper | LibreCat-ID: 8904
Improved reliability of bladed disks due to friction dampers
W. Sextro, K. Popp, I. Wolter, in: The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition, 1997.
LibreCat
 
[5]
1997 | Conference Paper | LibreCat-ID: 8902
Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen
K. Popp, W. Sextro, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, Frankfurt am Main, Germany, 1997, pp. 131–142.
LibreCat
 
[4]
1996 | Conference Paper | LibreCat-ID: 8896
Schwingungsverhalten eines Schaufelkranzes mit Reibelementen bei Frequenzverstimmung
K. Popp, W. Sextro, in: Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, Frankfurt am Main, Germany, 1996, pp. 53–76.
LibreCat
 
[3]
1996 | Conference Paper | LibreCat-ID: 8897
Dynamical Behaviour of a Bladed Disk with Friction Dampers
K. Popp, W. Sextro, in: The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH, Prag, 1996, pp. 157–183.
LibreCat
 
[2]
1993 | Journal Article | LibreCat-ID: 8895
Static Behaviour of Drill Strings in Curved Boreholes
W. Sextro, B. Schmalhorst, Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM) 73 (1993) 255–257.
LibreCat
 
[1]
1991 | Book Chapter | LibreCat-ID: 8894
Bifurcations in Dynamic Systems with Dry Friction
P. Stelter, W. Sextro, in: R. Seydel, F.W. Schneider, T. Küpper, H. Troger (Eds.), Bifurcation and Chaos: Analysis, Algorithms, Applications, Birkhäuser Basel, 1991, pp. 343–347.
LibreCat | DOI
 

Search

Filter Publications

Display / Sort

Export / Embed