198 Publications
2024 | Journal Article | LibreCat-ID: 51518
Aimiyekagbon, Osarenren Kennedy, et al. “Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions.” Electronics, vol. 13, no. 3, 521, MDPI AG, 2024, doi:10.3390/electronics13030521.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46813 | 
Wohlleben, Meike Claudia, et al. “Transferability of a Discrepancy Model for the Dynamics of Electromagnetic Oscillating Circuits.” Proceedings in Applied Mathematics and Mechanics, Wiley, 2023, doi:10.1002/pamm.202300039.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 47116 |
Aimiyekagbon, Osarenren Kennedy, et al. “Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System.” Proceedings of the Asia Pacific Conference of the PHM Society 2023 , vol. 4, no. 1, 2023, doi:10.36001/phmap.2023.v4i1.3596.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 51117
Scheidemann, Claus, et al. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51118
Scheidemann, Claus, et al. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51119
Scheidemann, Claus, et al. Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 51338
Schütte, Jan, and Walter Sextro. “Einfluss der Radhubkinematik auf den Reifenverschleiß.” 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, vol. 2425, VDI Verlag GmbH, 2023, pp. 165–80.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29934
Muth, Lars, et al. “Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data.” Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021, edited by Anna Orlova and David Cole, Springer, 2022, doi:10.1007/978-3-031-07305-2_92.
LibreCat
| DOI
| Download (ext.)
2022 | Book Chapter | LibreCat-ID: 29727
Wohlleben, Meike Claudia, et al. “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction.” Machine Learning, Optimization, and Data Science, Springer International Publishing, 2022, doi:10.1007/978-3-030-95470-3_8.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30371
Hagedorn, Oliver Ernst Caspar, et al. “Experimental Investigation of the Influence of Different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding.” CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, VDE VERLAG GMBH, 2022, pp. 138–43.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 47159
Aimiyekagbon, Osarenren Kennedy, et al. “On the Applicability of Time Series Features as Health Indicators for Technical Systems Operating under Varying Conditions.” Condition Monitor, no. 425, 2022, pp. 5–10.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34104
Scheidemann, Claus, et al. “Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding.” 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC), IEEE, 2022, doi:10.1109/estc55720.2022.9939478.
LibreCat
| DOI
2022 | Patent | LibreCat-ID: 9980
Reinke, Kai, et al. Patent DE 10 2017 000 926 B4: Gerät Mit Wenigstens Einem Elastisch Verformbaren Bauteil, Insbesondere Einem Gummi-Metall-Lager Und Mit Einer Einrichtung Zur Feststellung Des Beginns Einer Verschleißbedingten Bauteil-Restnutzungsdauer, Sowie Verfahren Zur Bestimmung Der Bauteil-Restnutzungsdauer. 2022.
LibreCat
| Files available
2022 | Report | LibreCat-ID: 52045
Scheidemann, Claus, et al. Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022, doi:10.2314/KXP:1879655276.
LibreCat
| Files available
| DOI
2021 | Conference Paper | LibreCat-ID: 27652
Aimiyekagbon, Osarenren Kennedy, et al. “Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten .” VDI-Berichte 2391, VDI Verlag GmbH, 2021, pp. 197–210.
LibreCat
2021 | Journal Article | LibreCat-ID: 21436
Schemmel, Reinhard, et al. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.” Microelectronics Reliability, vol. 119, 2021, p. 114077, doi:https://doi.org/10.1016/j.microrel.2021.114077.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 22724 |
Bender, Amelie, and Walter Sextro. “Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties.” Proceedings of the European Conference of the PHM Society 2021, edited by Phuc Do et al., vol. 6, no. 1, 2021, doi:https://doi.org/10.36001/phme.2021.v6i1.2843 .
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 22507 |
Aimiyekagbon, Osarenren Kennedy, et al. “On the Applicability of Time Series Features as Health Indicators for Technical Systems Operating under Varying Conditions.” Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat
| Files available
2021 | Conference Paper | LibreCat-ID: 27111 |
Aimiyekagbon, Osarenren Kennedy, et al. “Rule-Based Diagnostics of a Production Line.” Proceedings of the European Conference of the PHM Society 2021, edited by Phuc Do et al., vol. 6, no. 1, 2021, pp. 527–36, doi:10.36001/phme.2021.v6i1.3042.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 27508 |
Schütte, Jan, and Walter Sextro. “Tire Wear Reduction Based on an Extended Multibody Rear Axle Model.” Vehicles, 2021, pp. 233–56, doi:10.3390/vehicles3020015.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 29293 |
Martin, Sven, et al. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics, vol. 6, 100065, Elsevier BV, 2021, doi:10.1016/j.finmec.2021.100065.
LibreCat
| DOI
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 17355
Schemmel, Reinhard, et al. “Experimental Analysis and Modelling of Bond Formation in Ultrasonic Heavy Wire Bonding.” CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 2020, pp. 1–6.
LibreCat
2020 | Book | LibreCat-ID: 9857
Magnus, Kurt, et al. Schwingungen. Springer Vieweg Wiesbaden, 2020, doi:10.1007/978-3-658-31116-2.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 17706
Schemmel, Reinhard, et al. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.” 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2020, doi:10.1109/eurosime48426.2020.9152679.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 17810
Aimiyekagbon, Osarenren Kennedy, et al. “Evaluation of Time Series Forecasting Approaches for the Reliable Crack Length Prediction of Riveted Aluminium Plates given Insufficient Data.” PHM Society European Conference, vol. 5, no. 1, 2020.
LibreCat
2020 | Book Chapter | LibreCat-ID: 22007
Schütte, Jan, and Walter Sextro. “Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear.” Lecture Notes in Mechanical Engineering, 2020, doi:10.1007/978-3-030-38077-9_201.
LibreCat
| DOI
2020 | Patent | LibreCat-ID: 9981
Reinke, Kai, et al. Patent EP 3 358 332 B1: Verfahren Zur Bestimmung Des Beginns Einer Verschleißbedingten Bauteil-Restnutzungsdauer Eines Elastisch Verformbaren Bauteils, Als Strukturteil Und/Oder Lagerteil Eines Geräts. 2020.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 23716
Kaul, Thorben, et al. “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung.” Fachtagung Mechatronik 2019 Paderborn, edited by Torsten Bertram et al., 2019, pp. 19–24.
LibreCat
2019 | Conference Paper | LibreCat-ID: 15475
Schütte, Jan, et al. “Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen.” Fachtagung Mechatronik 2019, Universitätsbibliothek Paderborn, 2019, 2019, doi:10.17619/UNIPB/1-777.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 14852
Dunst, Paul, et al. “Atomization of Fluids with Ultrasound.” Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019), edited by Joost Lötters and Gerald Urban, 2019, pp. 140–43.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 15244
Hagedorn, Oliver Ernst Caspar, et al. “Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen.” 2. VDI-Fachtagung Schwingungen 2019, VDI Verlag GmbH · Düsseldorf 2019, 2019.
LibreCat
2019 | Book | LibreCat-ID: 10002
Sextro, Walter, and Michael Brökelmann. Intelligente Herstellung Zuverlässiger Kupferbondverbindungen. Vol. VIII, Springer Verlag, 2019, doi:10.1007/978-3-662-55146-2.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 10255
Bender, Amelie, et al. “Konstruktion Und Zustandsüberwachung Eines Gummi-Metall-Teils Mit Integriertem Thermoelement.” 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, vol. VDI-Berichte 2346, 2019, pp. 241–48.
LibreCat
2019 | Conference Paper | LibreCat-ID: 10257
Kaul, Thorben, et al. “Integration von Verlässlichkeitsmodellen Der Entwicklung in Einen Digitalen Zwilling Zur Umsetzung Einer Vorausschauenden Instandhaltung.” Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 10258
Dunst, Paul, et al. “Modellbasierte Und Experimentelle Charakterisierung von Intensiven Ultraschall-Stehwellenfeldern Für Die Zerstäubung Hochviskoser Flüssigkeiten.” DAGA 2019, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 10334
Schemmel, Reinhard, et al. “Using Complex Multi-Dimensional Vibration Trajectories in Ultrasonic Bonding and Welding.” Sensors and Actuators A: Physical, vol. 295, 2019, pp. 653–62, doi:10.1016/j.sna.2019.04.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 13460 |
Bender, Amelie, et al. “Remaining Useful Lifetime Prediction Based on Adaptive Failure Thresholds.” Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), edited by Michael Beer and Enrico Zio, no. 29, 2019, pp. 1262–69.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 13461 |
Kaul, Thorben, et al. “Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems.” Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), edited by Michael Beer and Enrico Zio, no. 29, 2019, pp. 2340–47.
LibreCat
| Download (ext.)
2018 | Conference Paper | LibreCat-ID: 9987
Bender, Amelie, and Walter Sextro. “A Particle Filtering Approach for Temperature Based Prognostics.” Safety and Reliability – Safe Societies in a Changing World, 2018, pp. 1025–33.
LibreCat
2018 | Journal Article | LibreCat-ID: 9990
Dunst, Paul, et al. “Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders.” ACTUATOR 2018; 16th International Conference on New Actuators, 2018, pp. 142–45.
LibreCat
2018 | Journal Article | LibreCat-ID: 9991
Dunst, Paul, et al. “Vibration-Assisted Handling of Dry Fine Powders.” Actuators 2018, 7(2)., 2018, pp. 1–11, doi:10.3390/act7020018.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 9992
Dymel, Collin, et al. “Numerical and Statistical Investigation of Weld Formation in a Novel Two-Dimensional Copper-Copper Bonding Process.” (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1–6.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9993
Dymel, Collin, et al. “Experimental Investigations on the Impact of Bond Process Parameters in Two-Dimensional Ultrasonic Copper Bonding.” (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.
LibreCat
2018 | Book | LibreCat-ID: 9995
Meyer, Tobias, et al. Steigerung Der Intelligenz Mechatronischer Systeme. Vol. Steigerung der Verlässlichkeit technischer Systeme, Springer Nature Switzerland AG. Part of Springer Nature., 2018, pp. 193–213.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9997
Schemmel, Reinhard, et al. “Effects of Different Working Frequencies on the Joint Formation in Copper Wire Bonding.” CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018), 2018, pp. 230–35.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9998
Schemmel, Reinhard, et al. “Numerical and Experimental Investigations in Ultrasonic Heavy Wire Bonding.” 6th European Conference on Computational Mechanics (ECCM 6), 2018, pp. 1–12.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9999
Unger, Andreas, et al. “Intelligent Production of Wire Bonds Using Multi-Objective Optimization – Insights, Opportunities and Challenges.” In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, vol. Vol. 2018, No. 1, pp. 000572-000577., 2018, doi:10.4071/2380-4505-2018.1.000572.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 23560
Hentze, Julian, et al. “Integrated Modeling of Behavior and Reliability in System Development.” ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB, edited by Anja Maier et al., Design Society, 2017, pp. 385–94.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9969
Bender, Amelie, et al. “Entwicklung Eines Condition Monitoring Systems Für Gummi-Metall-Elemente.” Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, 2017, pp. 347–58.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9970
Bender, Amelie, et al. “Modellbasierte Prognose Der Nutzbaren Restlebensdauer von Gummi-Metall-Elementen.” 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123–25.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9971
Bender, Amelie, et al. “Neuartiges Konzept Zur Lebensdauerprognose von Gummi-Metall-Elementen.” VDI-Berichte 2301, 2017, pp. 49–60.
LibreCat
2017 | Journal Article | LibreCat-ID: 9972
Dunst, Paul, et al. “Analysis of Pipe Vibration in an Ultrasonic Powder Transportationsystem.” Elsevier, vol. Sensors and Actuators A 263, 2017, pp. 733–36.
LibreCat
2017 | Journal Article | LibreCat-ID: 9973
Eichwald, Paul, et al. “Multi-Dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design.” IMAPSource, vol. Vol. 2017, No. 1, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9974
Hentze, Julian, et al. “Integrated Modeling Og Behavior and Reliability in System Development.” ICED17, 21st International Conference on Enginieering Design, 2017, pp. 385–94.
LibreCat
2017 | Journal Article | LibreCat-ID: 9976
Kaul, Thorben, et al. “Formulation of Reliability-Related Objective Functions for Design of Intelligent Mechatronic Systems.” SAGE Journals, vol. Vol. 231(4), 2017, pp. 390–99, doi:10.1177/1748006X17709376.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 9978
Kimotho, James Kuria, et al. “Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing.” IEEE Transactions on Reliability, 2017, pp. 1–10, doi:10.1109/TR.2017.2710260.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 9982
Schemmel, Reinhard, et al. “MoRFUS: Mobile Reinigungseinheit Für Förderketten Basierend Auf Ultraschall.” 43. Deutsche Jahrestagung Für Akustik, 2017, pp. 611–14.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9983
Schulze, Sebastian, et al. “Model Based Optimization of Dynamics in Adaptive Headlamps.” Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9985
Sextro, Walter, et al. “Entwicklung Verlässlicher, Intelligenter Systeme.” VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte., 2017, pp. 17–30.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9955
Althoff, Simon, et al. “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools.” IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–10, doi:10.1109/ECTC.2016.234.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 9957
Brökelmann, Michael, et al. “Kupferbondverbindungen Intelligent Herstellen.” Wt-Online, vol. 7/8, 2016, pp. 512–19.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9958
Dunst, Paul, et al. “Transportation of Dry Fine Powders by Coordinated Friction Manipulation.” PAMM Proc. Appl. Math. Mech. 16, 2016, pp. 635–36, doi:10.1002/pamm.201610306.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 9960
Eichwald, Paul, et al. “Micro Wear Modeling in Copper Wire Wedge Bonding.” IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9961
Kaul, Thorben, et al. “Modeling of Complex Redundancy in Technical Systems with Bayesian Networks.” Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9963
Kohl, Sergej, et al. “Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis Using ADAMS.” The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 2016, pp. 1–12.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9964
Lessmeier, Christian, et al. “Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification.” European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9966
Meyer , Tobias, et al. “Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation.” IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622–28, doi:10.1109/ECTC.2016.215.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 9967
Schulze, Sebastian, et al. “Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems.” 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1–11.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9968
Unger, Andreas, et al. “Validated Simulation of the Ultrasonic Wire Bonding Process.” Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 2016, pp. 251–54.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9943
Althoff, Simon, et al. “Improving the Cleaning Process in Copper Wire Bonding by Adapting Bonding Parameters.” 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6, doi:10.1109/EPTC.2015.7412402.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 9944
Bornmann, Peter, et al. “Kavitationsdetektion Mittels Self-Sensing-Ultraschallwandler.” Tm - Technisches Messen, vol. 82, no. 2, 2015, pp. 73–84, doi:10.1515/teme-2015-0017.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9945
Kaul, Thorben, et al. “Integrierte Modellierung Der Dynamik Und Der Verlässlichkeit Komplexer Mechatronischer Systeme.” 10. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, Universität Paderborn, 2015, pp. 101–12.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9946
Kaul, Thorben, et al. “Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems.” European Safety and Reliability Conference (ESREL2015), edited by Podofillini et al.}, Taylor and Francis, 2015, doi:10.1201/b19094-290.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9947
Kimotho, James Kuria, and Walter Sextro. “Comparison and Ensemble of Temperature-Based and Vibration-Based Methods for Machinery Prognostics.” Annual Conference of the Prognostics and Health Management Society 2015, vol. 6, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9949
Meyer, Tobias, et al. “Advantages of Reliability-Adaptive System Operation for Maintenance Planning.” Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 2015, pp. 940–45, doi:10.1016/j.ifacol.2015.09.647.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9950
Meyer, Tobias, et al. “Anforderungen an Condition-Monitoring-Verfahren Zur Nutzung Im Zuverläsigkeitsgeregelten Betrieb Adaptiver Systeme.” 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverlässiger Produkte, no. 2260, 2015, pp. 111–22.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9951
Meyer, Tobias, et al. “Modeling and Simulation of the Ultrasonic Wire Bonding Process.” 2015 17th Electronics Packaging Technology Conference, 2015, doi:10.1109/EPTC.2015.7412377.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9952
Schulte, Frank, et al. “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties.” Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–17.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9954
Unger, Andreas, et al. “Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear.” 2015 17th Electronics Packaging Technology Conference, 2015, doi:10.1109/EPTC.2015.7412375.
LibreCat
| DOI
2014 | Book | LibreCat-ID: 25168
Gausemeier, Jürgen, et al. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, 2014.
LibreCat
2014 | Book Chapter | LibreCat-ID: 25173
Dellnitz, Michael, et al. “Self-Optimizing Mechatronic Systems.” Dependability of Self-Optimizing Mechatronic Systems, Kapitel: 1.1, Springer-Verlag, 2014, pp. 3–12.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28394
Dorociak, Rafal, et al. “Development of the Active Guidance Module.” Dependability of Self-Optimizing Mechatronic Systems, AACE Press, 2014, pp. 178–82.
LibreCat
2014 | Book | LibreCat-ID: 28396
Gausemeier, J{\"u}rgen, et al. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany, 2014.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28399
Dorociak, Rafal, et al. “Selecting Suitable Methods Using the Methodology.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–78.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28400
Dorociak, Rafal, et al. “Selecting Suitable Methods Using the Methodology.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–78.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28410
Iwanek, Peter, et al. “Challenges.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2014, pp. 12–15.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9868
Althoff, Simon, et al. “Improving the Bond Quality of Copper Wire Bonds Using a Friction Model Approach.” Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–55, doi:10.1109/ECTC.2014.6897500.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9869
Bornmann, Peter, et al. “Self-Sensing Ultrasound Transducer for Cavitation Detection.” 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663–66, doi:10.1109/ULTSYM.2014.0163.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9871
Eichwald, Paul, et al. “Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding.” Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856–61, doi:10.4071/isom-THP34.
LibreCat
| DOI
2014 | Book | LibreCat-ID: 9873
Gausemeier, Jürgen, et al. Dependability of Self-Optimizing Mechatronic Systems. Vol. Lecture Notes in Mechanical Engineering, Springer Berlin Heidelberg, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 9874
Hemsel, Tobias, et al. “Reliability Analysis of Ultrasonic Power Transducers.” Archive of Applied Mechanics, Springer Berlin Heidelberg, 2014, pp. 1–7, doi:10.1007/s00419-014-0965-4.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9876
Hunstig, Matthias, et al. “High-Velocity Operation of Piezoelectric Inertia Motors: Experimental Validation.” Archive of Applied Mechanics, Springer Berlin Heidelberg, 2014, pp. 1–9, doi:10.1007/s00419-014-0940-0.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9879
Kimotho, James Kuria, et al. “PEM Fuel Cell Prognostics Using Particle Filter with Model Parameter Adaptation.” Prognostics and Health Management (PHM), 2014 IEEE Conference On, 2014, pp. 1–6, doi:10.1109/ICPHM.2014.7036406.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9880
Kimotho, James Kuria, and Walter Sextro. “An Approach for Feature Extraction and Selection from Non-Trending Data for Machinery Prognosis.” Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, vol. 5, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 9881
Kimotho, James Kuria, and Walter Sextro. “Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation.” PAMM, vol. 14, no. 1, WILEY-VCH Verlag, 2014, pp. 815–16, doi:10.1002/pamm.201410388.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9882
Kohl, Sergej, et al. “Tire Footprint Analysis Depending on the Elastokinematics of a Multi-Link Suspension System Using Multi-Body Dynamics Simulation.” PAMM, vol. 14, no. 1, WILEY-VCH Verlag, 2014, pp. 65–66, doi:10.1002/pamm.201410020.
LibreCat
| DOI
2014 | Book Chapter | LibreCat-ID: 9883
Meyer, Tobias, et al. “Conclusion and Outlook.” Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier et al., Springer Berlin Heidelberg, 2014, pp. 189–90, doi:10.1007/978-3-642-53742-4_5.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9885
Meyer , Tobias, et al. “Method to Identify Dependability Objectives in Multiobjective Optimization Problem.” Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence, vol. 15, 2014, pp. 46–53, doi:10.1016/j.protcy.2014.09.033.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9887
Neuhaus, Jan, and Walter Sextro. “Thermo-Mechanical Model for Wheel Rail Contact Using Coupled Point Contact Elements.” Proceedings of the 5th International Conference on Computational Methods, edited by G.R. Liu and Z.W. Guan, ScienTech Publisher, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 9888
Schulze, Sebastian, et al. “Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications.” PAMM, vol. 14, no. 1, WILEY-VCH Verlag, 2014, pp. 39–40, doi:10.1002/pamm.201410012.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9889
Sprock, Christian, and Walter Sextro. “Time-Efficient Dynamic Analysis of Structures Exhibiting Nonlinear Peak Bending.” Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 2014, pp. 320–24, doi:10.1109/I2MTC.2014.6860760.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9890
Sprock, Christian, and Walter Sextro. “Time-Efficient Analysis of Nonlinear Dynamic Behavior.” Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, 2014, pp. 293–94.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9891
Sprock, Christian, and Walter Sextro. “Time-Efficient Analysis of Nonlinear Peak Bending Behavior.” Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 2014, pp. 1–8.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9892
Sprock, Christian, and Walter Sextro. “Vibration Analysis of Mechanical Structures Using Multisine Excitation Techniques.” Proceedings of 31st Danubia-Adria Symposium. 2014, 2014.
LibreCat
2014 | Book Chapter | LibreCat-ID: 9893
Trächtler, Ansgar, et al. “Introduction to Self-Optimization and Dependability.” Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier et al., Springer Berlin Heidelberg, 2014, pp. 1–24, doi:10.1007/978-3-642-53742-4_1.
LibreCat
| DOI
2014 | Book Chapter | LibreCat-ID: 9894
Trächtler, Ansgar, et al. “Case Study.” Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier et al., Springer Berlin Heidelberg, 2014, pp. 173–88, doi:10.1007/978-3-642-53742-4_4.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9895
Unger, Andreas, et al. “Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds.” Proceedings of the 47th International Symposium on Microelectronics (IMAPS), 2014, pp. 289–94.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9896
Unger, Andreas, et al. “Data-Driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding.” Proceedings of 8th International Conference on Integrated Power Electronic Systems, vol. 141, 2014, pp. 175–80.
LibreCat
2013 | Conference Paper | LibreCat-ID: 26973
Meyer, Tobias, et al. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
2013 | Book Chapter | LibreCat-ID: 23139
Kessler, Jan Henning, et al. “Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 55–62.
LibreCat
2013 | Conference Paper | LibreCat-ID: 23140
Meyer, Tobias, et al. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
2013 | Book Chapter | LibreCat-ID: 23149
Hölscher, Christian, et al. “Applications of Self-Optimizing Systems.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 16–22.
LibreCat
2013 | Journal Article | LibreCat-ID: 9794
Al-Ashtari, Waleed, et al. “Increasing the Power of Piezoelectric Energy Harvesters by Magnetic Stiffening.” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, 2013, pp. 1332–42, doi:10.1177/1045389X13483021.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9795
Al-Ashtari, Waleed, et al. “Enhanced Energy Harvesting Using Multiple Piezoelectric Elements: Theory and Experiments.” Sensors and Actuators A: Physical, vol. 200, 2013, pp. 138–46, doi:10.1016/j.sna.2013.01.008.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9796
Al-Ashtari, Waleed, et al. “Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems.” Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, no. 05/2013, 2013, pp. 159–61.
LibreCat
2013 | Conference Paper | LibreCat-ID: 9797
Althoff, Simon, et al. “A Friction Based Approach for Modeling Wire Bonding.” IMAPS 2013, 46th International Symposium on Microelectronics, 2013, doi:10.4071/isom-2013-TA67.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9799
Eichwald, Paul, et al. “Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding.” 15th Electronics Packaging Technology Conference, 2013, doi:10.1109/EPTC.2013.6745803.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9801
Hunstig, Matthias, et al. “Leistungs- Und Bandbreitensteigerung von Energy-Harvesting-Generatoren Für Energieautarke Systeme.” 9. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, Universität Paderborn, 2013, pp. 359–72.
LibreCat
2013 | Conference Paper | LibreCat-ID: 9802
Hunstig, Matthias, et al. “High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation.” Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, 2013, pp. 16–18.
LibreCat
2013 | Journal Article | LibreCat-ID: 9803
Hunstig, Matthias, et al. “Modelling the Friction Contact in an Inertia Motor.” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, 2013, pp. 1380–91, doi:10.1177/1045389X12474354.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9804
Hunstig, Matthias, et al. “Stick-Slip and Slip-Slip Operation of Piezoelectric Inertia Drives - Part II: Frequency-Limited Excitation.” Sensors and Actuators A: Physical, vol. 200, 2013, pp. 79–89, doi:10.1016/j.sna.2012.11.043.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9805
Hunstig, Matthias, et al. “Stick-Slip and Slip-Slip Operation of Piezoelectric Inertia Drives - Part I: Ideal Excitation.” Sensors and Actuators A: Physical, vol. 200, 2013, pp. 90–100, doi:10.1016/j.sna.2012.11.012.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9807
Kimotho, James Kuria, et al. “Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization.” Chemical Engineering Transactions, vol. 33, 2013, pp. 619–24, doi:10.3303/CET1333104.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9808
Kimotho, James Kuria, et al. “Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation.” International Journal of Prognostics and Health Management, vol. 4, no. 2, 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 9855
Kohl, Sergej, et al. “Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems.” Proc. Appl. Math. Mech., vol. 13, 2013, pp. 23–24, doi:10.1002/pamm.201310007.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9858
Meyer, Tobias, et al. “Multiobjective Optimization Including Safety of Operation Applied to a Linear Drive System.” Proc. Appl. Math. Mech., vol. 13, 2013, pp. 483–84, doi:10.1002/pamm.201310234.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9859
Meyer , Tobias, et al. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” Proceedings of the Annual Reliability and Maintainability Symposium (RAMS), 2013, doi:10.1109/RAMS.2013.6517636.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9860
Meyer, Tobias, et al. “Controlling the Remaining Useful Lifetime Using Self-Optimization.” Chemical Engineering Transactions, vol. 33, 2013, pp. 625–30, doi:10.3303/CET1333105.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9861
Meyer, Tobias, et al. “Bewertung Der Zuverlässigkeit Selbstoptimierender Systeme Mit Dem LARES-Framework.” 9. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, Universität Paderborn, 2013, pp. 161–74.
LibreCat
2012 | Journal Article | LibreCat-ID: 9781
Al-Ashtari, Waleed, et al. “Frequency Tuning of Piezoelectric Energy Harvesters by Magnetic Force.” Smart Materials and Structures, vol. 21, no. 3, 2012, p. 035019.
LibreCat
2012 | Journal Article | LibreCat-ID: 9782
Al-Ashtari, Waleed, et al. “Analytical Determination of Characteristic Frequencies and Equivalent Circuit Parameters of a Piezoelectric Bimorph.” Journal of Intelligent Material Systems and Structures, vol. 23, no. 1, 2012, pp. 15–23, doi:10.1177/1045389X11430742.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 9783
Bornmann, Peter, et al. “Non-Perturbing Cavitation Detection / Monitoring in Sonochemical Reactors.” Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–44, doi:10.1109/ULTSYM.2012.0284.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 9787
Kohl, Sergej, et al. “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung Basierend Auf Einer Neuen Auslegungstheorie.” 8. Tag Des Fahrwerks, Aachen, 2012, 2012, pp. 38–60.
LibreCat
2012 | Conference Paper | LibreCat-ID: 9791
Sondermann-Wölke , Christoph, et al. “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System Based on Its Principle Solution.” Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012), 2012.
LibreCat
2012 | Journal Article | LibreCat-ID: 9806
Hunstig, Matthias, et al. “Analysis of Different Operation Modes for Inertia Motors.” ACTUATOR 2012 Conference Proceedings, 2012, pp. 761–64.
LibreCat
2011 | Conference Paper | LibreCat-ID: 26981
Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” Technische Zuverlässigkeit TTZ, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 23184
Lurye, Oleg, et al. “Verlässlichkeitsanalyse Des Degradationsverhaltens Mechatronischer Systeme Mit Mehreren Betriebsstrategien.” VDI Bericht Zur Tagung Technische Zuverlässigkeit, VDI-Verlag, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 23194
Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” Technische Zuverlässigkeit TTZ, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 9768
Lurie, Oleg, et al. “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies.” 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 2011, pp. 99–110.
LibreCat
2011 | Conference Paper | LibreCat-ID: 9771
Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 2011, pp. 291–302.
LibreCat
2011 | Journal Article | LibreCat-ID: 9772
Tomberger, Christoph, et al. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.” Wear, vol. 271, 2011, pp. 2–12, doi:10.1016/j.wear.2010.10.025.
LibreCat
| DOI
2011 | Patent | LibreCat-ID: 9790
Sextro, Walter, et al. Patent DE10201003395: Anordnung Und Verfahren Zur Mehrdimensionalen Messung von Schwingungen Eines Objekts. . 2011.
LibreCat
2010 | Journal Article | LibreCat-ID: 9747
Hölzl, Johannes Sebastian, and Walter Sextro. “Reibungsdämpfung in Ausgedehnten, Verschraubten Fügestellen.” PAMM, vol. 10, no. 1, WILEY-VCH Verlag, 2010, pp. 247–48, doi:10.1002/pamm.201010116.
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9748
Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.” SAE International Journal of Passenger Cars- Mechanical Systems, 2010, pp. 929–35, doi:10.4271/2010-01-1422.
LibreCat
| DOI
2010 | Conference Paper | LibreCat-ID: 9753
Hunstig, Matthias, et al. “Anregungskonzepte Und Modellierung Piezoelektrischer Trägheitsmotoren.” 7. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., vol. 272, Heinz Nixdorf Institut, Universität Paderborn, 2010, pp. 129–41.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9754
Hunstig, Matthias, et al. “Improving the Performance of Piezoelectric Inertia Motors.” ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–61.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9760
Sondermann-Wölke, Christoph, et al. “Guideline for the Dependability-Oriented Design of Self-Optimizing Systems.” Industrial Informatics (INDIN), 2010 8th IEEE International Conference On, 2010, pp. 739–44, doi:10.1109/INDIN.2010.5549490.
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9761
Sondermann-Wölke, Christoph, and Walter Sextro. “Integration of Condition Monitoring in Self-Optimizing Function Modules Applied to the Active Railway Guidance Module.” International Journal On Advances in Intelligent Systems, vol. 3, no. 1–3, 2010, pp. 65–74.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9762
Sondermann-Wölke, Christoph, et al. “Experimentelle Untersuchung Der Selbstoptimierung Innerhalb Des RailCab-Spurführungsmoduls.” Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., vol. 272, 2010, pp. 411–20.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9763
Sondermann-Wölke, Christoph, et al. “Increasing the Reliability of a Self-Optimizing Railway Guidance System.” Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6, doi:10.1109/RAMS.2010.5448080.
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9764
Tomberger, Christoph, et al. “Einfluss von Oberflächenrauheit, Fluiden Zwischenschichten Und Kontakttemperaturen Auf Den Kraftschluss Zwischen Rad Und Schiene.” ZEVrail, vol. 134, 2010, pp. 127–35.
LibreCat
2009 | Conference Paper | LibreCat-ID: 9742
Sondermann-Wölke, Christoph, and Walter Sextro. “Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules.” Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:, 2009, pp. 15–20, doi:10.1109/ComputationWorld.2009.47.
LibreCat
| DOI
2007 | Conference Paper | LibreCat-ID: 9560
Tonchev, Anton, et al. “Modellierung Der Hysterese- Und Adhäsionseffekte Zwischen Bremsbelag Und Bremsscheibe.” 27. Internationales Mju-Symposium/Bremsen-Fachtagung, no. 657, VDI Verlag GmbH, 2007, pp. 29–49.
LibreCat
2007 | Conference Paper | LibreCat-ID: 9561
Tonchev, Anton, et al. “Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc.” 27. Internationales Mju-Symposium/Bremsen-Fachtagung, no. 657, VDI Verlag GmbH, 2007, pp. 144–63.
LibreCat
2007 | Conference Paper | LibreCat-ID: 9563
Genzo, Alexander, et al. “Schwingungsverhalten Elastischer Körper Mit Nichtlinearen Kopplungen in Ausgedehnten Reibkontakten.” VDI-Berichte, vol. 2022, VDI Verlag GmbH, 2007, pp. 147–61.
LibreCat
2007 | Journal Article | LibreCat-ID: 9567
Szwedowicz, J., et al. “On Nonlinear Forced Vibration of Shrouded Turbine Blades.” Journal of Turbomachinery, vol. 130, no. 1, 2007, pp. 011002–011002.
LibreCat
2006 | Conference Paper | LibreCat-ID: 9535
Genzo, Alexander, and Walter Sextro. “Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts.” Proceedings of ISMA - International Conference on Noise and Vibration Engineering, 2006, pp. 51–52.
LibreCat
2006 | Book Chapter | LibreCat-ID: 9536
Gutzeit, F., et al. “Unsteady Rolling Contact of Rubber Wheels.” Analysis and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst, vol. 27, Springer Berlin Heidelberg, 2006, pp. 261–70, doi:10.1007/3-540-31761-9_29.
LibreCat
| DOI
2006 | Conference Paper | LibreCat-ID: 9542
Hofmeisterro, Adolf, et al. “Error-Workspace Analysis of Plane Mechanisms.” Proceedings of EUCOMES, the First European Conference on Mechanism Science, 2006, pp. 1–12.
LibreCat
2006 | Book Chapter | LibreCat-ID: 9551
Sextro, Walter, et al. “Contact Behaviour of a Sliding Rubber Element.” Analysis and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst, vol. 27, Springer Berlin Heidelberg, 2006, pp. 243–52, doi:10.1007/3-540-31761-9_27.
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9266
Genzo, Alexander, et al. “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM, vol. 5, no. 1, WILEY-VCH Verlag, 2005, pp. 91–92, doi:10.1002/pamm.200510026.
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9526
Genzo, Alexander, et al. “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM, vol. 5, no. 1, WILEY-VCH Verlag, 2005, pp. 91–92, doi:10.1002/pamm.200510026.
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9529
Hofmeister, Adolf, et al. “Unkontrollierbare Bewegungen Ebener Mechanismen Mit Gelenkspiel.” PAMM, vol. 5, no. 1, WILEY-VCH Verlag, 2005, pp. 201–02, doi:10.1002/pamm.200510078.
LibreCat
| DOI
2004 | Conference Paper | LibreCat-ID: 8952
Götting, Florian, et al. “Systematic Mistuning of Bladed Disk Assemblies with Friction Contacts.” Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, vol. 6, no. GT2004-53310, 2004, pp. 257–67.
LibreCat
2004 | Journal Article | LibreCat-ID: 9520
Lindner, Markus, et al. “Hysteretic Friction of a Sliding Rubber Element.” PAMM, vol. 4, no. 1, WILEY-VCH Verlag, 2004, pp. 101–02, doi:10.1002/pamm.200410032.
LibreCat
| DOI
2004 | Conference Paper | LibreCat-ID: 9523
Panning, Lars, et al. “Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application.” Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, vol. 6, no. GT2004-53316, 2004, pp. 269–80, doi:10.1115/GT2004-53316.
LibreCat
| DOI
2003 | Conference Paper | LibreCat-ID: 8933
Götting, Florian, et al. “Schwingungsverhalten von Verstimmten Beschaufelungen Mit Reibelementen.” Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Darmstadt, edited by H Irretier et al., Vieweg-Verlag, 2003, pp. 201–10.
LibreCat
2003 | Journal Article | LibreCat-ID: 8934
Genzo, Alexander, et al. “Erzwungene Schwingungen von Elastischen Mehrkörpersystemen Mit Reibkontakten.” PAMM, vol. 2, no. 1, WILEY-VCH Verlag, 2003, pp. 120–21, doi:10.1002/pamm.200310046.
LibreCat
| DOI
2003 | Journal Article | LibreCat-ID: 8937
Panning, Lars, et al. “Design of Friction Dampers for Mistuned Bladed Disks.” PAMM, vol. 3, no. 1, WILEY-VCH Verlag, 2003, pp. 118–19, doi:10.1002/pamm.200310336.
LibreCat
| DOI
2003 | Journal Article | LibreCat-ID: 8938
Panning, Lars, et al. “Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers.” International Journal of Rotating Machinery, vol. 9, no. 3, Hindawi Publishing Corporation, 2003, pp. 219–28.
LibreCat
2003 | Journal Article | LibreCat-ID: 8939
Popp, Karl, et al. “Vibration Damping by Friction Forces -Theory and Applications.” Journal of Vibration and Control, vol. 9, 2003, pp. 419–48.
LibreCat
2003 | Conference Paper | LibreCat-ID: 8940
Sextro, Walter, and Karl Popp. “Optimierung Des Schwingungsverhaltens Elastischer Strukturen Mit Reibfugen Am Beispiel von Turbomaschinenschaufeln.” Forschungsvereinigung Verbrennungskraftmaschinen (FW), no. 753, 2003, p. 40.
LibreCat
2003 | Conference Paper | LibreCat-ID: 8941
Szwedowicz, J., et al. “On Forced Vibration of Shrouded Turbine Blades.” ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference, no. GT2003-38808, 2003, doi:doi:10.1115/GT2003-38808.
LibreCat
| DOI
2002 | Conference Paper | LibreCat-ID: 8928
Panning, Lars, et al. “Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction Damping.” Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, no. GT-2002-30429, 2002.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8929
Panning, Lars, et al. “Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers.” Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC, 2002.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8931
Sextro, Walter, et al. “Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts.” Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, no. GT-2002-30427, 2002.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8932
Sextro, Walter, and Karl Popp. “Optimierung Des Schwingungsverhaltens Elastischer Strukturen Mit Reibfugen.” Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, no. 518, 2002, pp. 157–83.
LibreCat
2001 | Conference Paper | LibreCat-ID: 8921
Panning, Lars, et al. “Schwingungsanalyse Verstimmter Schaufelkränze Mit Reibelementen.” Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Wien, edited by H Irretier et al., Vieweg-Verlag, 2001, pp. 297–306.
LibreCat
2001 | Journal Article | LibreCat-ID: 8922
Sextro, Walter. “Heat and Wear Generation for Rolling Contacts.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), vol. 81, 2001, pp. 225–26.
LibreCat
2001 | Conference Paper | LibreCat-ID: 8923
Sextro, Walter. “Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction.” ASME Design Engineering Technical Conferences, no. DETC2001/VIB-21512, 2001, pp. 1–12.
LibreCat
2001 | Journal Article | LibreCat-ID: 8924
Sextro, Walter, et al. “Localization in Nonlinear Mistuned Systems with Cyclic Symmetry.” Nonlinear Dynamics, vol. 25, no. 1–3, Kluwer Academic Publishers, 2001, pp. 207–20, doi:10.1023/A:1012915002568.
LibreCat
| DOI
2000 | Journal Article | LibreCat-ID: 8918
Krzyzynski, Tomasz, et al. “On Some Regularities in Dynamic Response of Cyclic Periodic Structures.” Chaos, Solitons \& Fractals, vol. 11, no. 10, 2000, pp. 1597–609, doi:10.1016/S0960-0779(99)00080-6.
LibreCat
| DOI
2000 | Conference Paper | LibreCat-ID: 8919
Panning, Lars, et al. “Optimization of Interblade Friction Damper.” International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 2000, pp. 1–8.
LibreCat
2000 | Conference Paper | LibreCat-ID: 8920
Sextro, Walter. “The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification.” International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 2000, pp. 1–8.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8909
Popp, Karl, and Walter Sextro. “Schwingungsanalyse von Vorgespannten Schaufeln Mit Deckplatten Im Schaufelkranz.” Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, no. 504, 1999, pp. 21–38.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8910
Sextro, Walter. “Experimental Verification of a Non-Hertzian Contact Model.” International Conference on Computational Methods in Contact Mechanics, 1999, pp. 181–90.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8911
Sextro, Walter. “Forced Vibration of Elastic Structures with Friction Contacts.” ASME Design Engineering Technical Conferences, no. DETC99/VIB-8180, 1999, pp. 1–10.
LibreCat
1999 | Journal Article | LibreCat-ID: 8912
Sextro, Walter, and Karl Popp. “Ein Ebenes Reibkontaktmodell Zur Berechnung von Schaufelschwingungen Mit Reibelementen.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), vol. 79, 1999, pp. 311–12.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8913
Sextro, Walter, and Karl Popp. “Schwingungsanalyse von Vorgespannten Schaufeln Mit Deckplatten Im Schaufelkranz.” Forschungsvereinigung Verbrennungskraftmaschinen (FW), no. 686, 1999, p. 56.
LibreCat
1998 | Conference Paper | LibreCat-ID: 8907
Sextro, Walter, et al. “Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers.” International Congress on Combustion Engines, Proceedings of the 22nd CIMAC, vol. 1, 1998, pp. 257–70.
LibreCat
1998 | Conference Paper | LibreCat-ID: 8908
Sextro, Walter, et al. “Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers.” The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7, vol. B, 1998, pp. 621–30.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8902
Popp, Karl, and Walter Sextro. “Schwingungsverhalten von Verstimmten Beschaufelungen Mit Reibelementen.” Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, no. 496, 1997, pp. 131–42.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8903
Sextro, Walter. “Schwingungsverhalten von Schaufelkränzen Mit Reibelementen Bei Frequenzverstimmung.” VDI-Reihe, vol. 11, no. 245, VDI-Verlag, Düsseldorf, 1997.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8904
Sextro, Walter, et al. “Improved Reliability of Bladed Disks Due to Friction Dampers.” The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition, 1997.
LibreCat
1996 | Conference Paper | LibreCat-ID: 8896
Popp, Karl, and Walter Sextro. “Schwingungsverhalten Eines Schaufelkranzes Mit Reibelementen Bei Frequenzverstimmung.” Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, no. 490, 1996, pp. 53–76.
LibreCat
1996 | Conference Paper | LibreCat-ID: 8897
Popp, Karl, and Walter Sextro. “Dynamical Behaviour of a Bladed Disk with Friction Dampers.” The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH, vol. 1, no. 518, 1996, pp. 157–83.
LibreCat
1993 | Journal Article | LibreCat-ID: 8895
Sextro, Walter, and B. Schmalhorst. “Static Behaviour of Drill Strings in Curved Boreholes.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), vol. 73, 1993, pp. 255–57.
LibreCat
1991 | Book Chapter | LibreCat-ID: 8894
Stelter, Peter, and Walter Sextro. “Bifurcations in Dynamic Systems with Dry Friction.” Bifurcation and Chaos: Analysis, Algorithms, Applications, edited by R. Seydel et al., vol. 97, Birkhäuser Basel, 1991, pp. 343–47, doi:10.1007/978-3-0348-7004-7_44.
LibreCat
| DOI
198 Publications
2024 | Journal Article | LibreCat-ID: 51518
Aimiyekagbon, Osarenren Kennedy, et al. “Diagnostics of Piezoelectric Bending Actuators Subjected to Varying Operating Conditions.” Electronics, vol. 13, no. 3, 521, MDPI AG, 2024, doi:10.3390/electronics13030521.
LibreCat
| DOI
2023 | Conference Paper | LibreCat-ID: 46813 |
Wohlleben, Meike Claudia, et al. “Transferability of a Discrepancy Model for the Dynamics of Electromagnetic Oscillating Circuits.” Proceedings in Applied Mathematics and Mechanics, Wiley, 2023, doi:10.1002/pamm.202300039.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Paper | LibreCat-ID: 47116 |
Aimiyekagbon, Osarenren Kennedy, et al. “Expert-Informed Hierarchical Diagnostics of Multiple Fault Modes of a Spacecraft Propulsion System.” Proceedings of the Asia Pacific Conference of the PHM Society 2023 , vol. 4, no. 1, 2023, doi:10.36001/phmap.2023.v4i1.3596.
LibreCat
| DOI
| Download (ext.)
2023 | Conference Abstract | LibreCat-ID: 51117
Scheidemann, Claus, et al. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51118
Scheidemann, Claus, et al. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. 2023.
LibreCat
2023 | Conference Abstract | LibreCat-ID: 51119
Scheidemann, Claus, et al. Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. 2023.
LibreCat
2023 | Book Chapter | LibreCat-ID: 51338
Schütte, Jan, and Walter Sextro. “Einfluss der Radhubkinematik auf den Reifenverschleiß.” 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, vol. 2425, VDI Verlag GmbH, 2023, pp. 165–80.
LibreCat
2022 | Conference Paper | LibreCat-ID: 29934
Muth, Lars, et al. “Generation of a Reduced, Representative, Virtual Test Drive for Fast Evaluation of Tire Wear by Clustering of Driving Data.” Advances in Dynamics of Vehicles on Roads and Tracks II - Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021, edited by Anna Orlova and David Cole, Springer, 2022, doi:10.1007/978-3-031-07305-2_92.
LibreCat
| DOI
| Download (ext.)
2022 | Book Chapter | LibreCat-ID: 29727
Wohlleben, Meike Claudia, et al. “Development of a Hybrid Modeling Methodology for Oscillating Systems with Friction.” Machine Learning, Optimization, and Data Science, Springer International Publishing, 2022, doi:10.1007/978-3-030-95470-3_8.
LibreCat
| DOI
| Download (ext.)
2022 | Conference Paper | LibreCat-ID: 30371
Hagedorn, Oliver Ernst Caspar, et al. “Experimental Investigation of the Influence of Different Bond Tool Grooves on the Bond Quality for Ultrasonic Thick Wire Bonding.” CIPS 2022 - 12th International Conference on Integrated Power Electronics Systems, VDE VERLAG GMBH, 2022, pp. 138–43.
LibreCat
2022 | Newspaper Article | LibreCat-ID: 47159
Aimiyekagbon, Osarenren Kennedy, et al. “On the Applicability of Time Series Features as Health Indicators for Technical Systems Operating under Varying Conditions.” Condition Monitor, no. 425, 2022, pp. 5–10.
LibreCat
2022 | Conference Paper | LibreCat-ID: 34104
Scheidemann, Claus, et al. “Experimental Investigation of Multidimensional Ultrasonic Heavy Wire Bonding.” 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC), IEEE, 2022, doi:10.1109/estc55720.2022.9939478.
LibreCat
| DOI
2022 | Patent | LibreCat-ID: 9980
Reinke, Kai, et al. Patent DE 10 2017 000 926 B4: Gerät Mit Wenigstens Einem Elastisch Verformbaren Bauteil, Insbesondere Einem Gummi-Metall-Lager Und Mit Einer Einrichtung Zur Feststellung Des Beginns Einer Verschleißbedingten Bauteil-Restnutzungsdauer, Sowie Verfahren Zur Bestimmung Der Bauteil-Restnutzungsdauer. 2022.
LibreCat
| Files available
2022 | Report | LibreCat-ID: 52045
Scheidemann, Claus, et al. Modellbasierte Ermittlung optimaler Prozessparameter für neuartige Ultraschallbondverbindungen. LibreCat University, 2022, doi:10.2314/KXP:1879655276.
LibreCat
| Files available
| DOI
2021 | Conference Paper | LibreCat-ID: 27652
Aimiyekagbon, Osarenren Kennedy, et al. “Extraktion und Selektion geeigneter Merkmale für die Restlebensdauerprognose von technischen Systemen trotz aleatorischen Unsicherheiten .” VDI-Berichte 2391, VDI Verlag GmbH, 2021, pp. 197–210.
LibreCat
2021 | Journal Article | LibreCat-ID: 21436
Schemmel, Reinhard, et al. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.” Microelectronics Reliability, vol. 119, 2021, p. 114077, doi:https://doi.org/10.1016/j.microrel.2021.114077.
LibreCat
| DOI
2021 | Conference Paper | LibreCat-ID: 22724 |
Bender, Amelie, and Walter Sextro. “Hybrid Prediction Method for Remaining Useful Lifetime Estimation Considering Uncertainties.” Proceedings of the European Conference of the PHM Society 2021, edited by Phuc Do et al., vol. 6, no. 1, 2021, doi:https://doi.org/10.36001/phme.2021.v6i1.2843 .
LibreCat
| DOI
| Download (ext.)
2021 | Conference Paper | LibreCat-ID: 22507 |
Aimiyekagbon, Osarenren Kennedy, et al. “On the Applicability of Time Series Features as Health Indicators for Technical Systems Operating under Varying Conditions.” Proceedings of the Seventeenth International Conference on Condition Monitoring and Asset Management (CM 2021).
LibreCat
| Files available
2021 | Conference Paper | LibreCat-ID: 27111 |
Aimiyekagbon, Osarenren Kennedy, et al. “Rule-Based Diagnostics of a Production Line.” Proceedings of the European Conference of the PHM Society 2021, edited by Phuc Do et al., vol. 6, no. 1, 2021, pp. 527–36, doi:10.36001/phme.2021.v6i1.3042.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 27508 |
Schütte, Jan, and Walter Sextro. “Tire Wear Reduction Based on an Extended Multibody Rear Axle Model.” Vehicles, 2021, pp. 233–56, doi:10.3390/vehicles3020015.
LibreCat
| DOI
| Download (ext.)
2021 | Journal Article | LibreCat-ID: 29293 |
Martin, Sven, et al. “Identification of Joints for a Load-Adapted Shape in a Body in White Using Steady State Vehicle Simulations.” Forces in Mechanics, vol. 6, 100065, Elsevier BV, 2021, doi:10.1016/j.finmec.2021.100065.
LibreCat
| DOI
| Download (ext.)
2020 | Conference Paper | LibreCat-ID: 17355
Schemmel, Reinhard, et al. “Experimental Analysis and Modelling of Bond Formation in Ultrasonic Heavy Wire Bonding.” CIPS 2020; 11th International Conference on Integrated Power Electronics Systems, 2020, pp. 1–6.
LibreCat
2020 | Book | LibreCat-ID: 9857
Magnus, Kurt, et al. Schwingungen. Springer Vieweg Wiesbaden, 2020, doi:10.1007/978-3-658-31116-2.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 17706
Schemmel, Reinhard, et al. “Co-Simulation of MATLAB and ANSYS for Ultrasonic Wire Bonding Process Optimization.” 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2020, doi:10.1109/eurosime48426.2020.9152679.
LibreCat
| DOI
2020 | Conference Paper | LibreCat-ID: 17810
Aimiyekagbon, Osarenren Kennedy, et al. “Evaluation of Time Series Forecasting Approaches for the Reliable Crack Length Prediction of Riveted Aluminium Plates given Insufficient Data.” PHM Society European Conference, vol. 5, no. 1, 2020.
LibreCat
2020 | Book Chapter | LibreCat-ID: 22007
Schütte, Jan, and Walter Sextro. “Model-Based Investigation of the Influence of Wheel Suspension Characteristics on Tire Wear.” Lecture Notes in Mechanical Engineering, 2020, doi:10.1007/978-3-030-38077-9_201.
LibreCat
| DOI
2020 | Patent | LibreCat-ID: 9981
Reinke, Kai, et al. Patent EP 3 358 332 B1: Verfahren Zur Bestimmung Des Beginns Einer Verschleißbedingten Bauteil-Restnutzungsdauer Eines Elastisch Verformbaren Bauteils, Als Strukturteil Und/Oder Lagerteil Eines Geräts. 2020.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 23716
Kaul, Thorben, et al. “Integration von Verlässlichkeitsmodellen der Entwicklung in einen Digitalen Zwilling zur Umsetzung einer vorausschauenden Instandhaltung.” Fachtagung Mechatronik 2019 Paderborn, edited by Torsten Bertram et al., 2019, pp. 19–24.
LibreCat
2019 | Conference Paper | LibreCat-ID: 15475
Schütte, Jan, et al. “Halbachsprüfstand zur kinematischen, elastokinematischen und dynamischen Charakterisierung von Radaufhängungen.” Fachtagung Mechatronik 2019, Universitätsbibliothek Paderborn, 2019, 2019, doi:10.17619/UNIPB/1-777.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 14852
Dunst, Paul, et al. “Atomization of Fluids with Ultrasound.” Conference Proceedings - The 4th Conference on MicroFluidic Handling Systems (MFHS2019), edited by Joost Lötters and Gerald Urban, 2019, pp. 140–43.
LibreCat
| Files available
2019 | Conference Paper | LibreCat-ID: 15244
Hagedorn, Oliver Ernst Caspar, et al. “Messung hochfrequenter In-Plane-Schwingungen mittels Laservibrometrie in räumlich eingeschränkten Umgebungen.” 2. VDI-Fachtagung Schwingungen 2019, VDI Verlag GmbH · Düsseldorf 2019, 2019.
LibreCat
2019 | Book | LibreCat-ID: 10002
Sextro, Walter, and Michael Brökelmann. Intelligente Herstellung Zuverlässiger Kupferbondverbindungen. Vol. VIII, Springer Verlag, 2019, doi:10.1007/978-3-662-55146-2.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 10255
Bender, Amelie, et al. “Konstruktion Und Zustandsüberwachung Eines Gummi-Metall-Teils Mit Integriertem Thermoelement.” 10. VDI-Fachtagung Schwingungen von Windenergieanlagen 2019, vol. VDI-Berichte 2346, 2019, pp. 241–48.
LibreCat
2019 | Conference Paper | LibreCat-ID: 10257
Kaul, Thorben, et al. “Integration von Verlässlichkeitsmodellen Der Entwicklung in Einen Digitalen Zwilling Zur Umsetzung Einer Vorausschauenden Instandhaltung.” Fachtagung Mechatronik 2019 Paderborn, 2019.
LibreCat
2019 | Conference Paper | LibreCat-ID: 10258
Dunst, Paul, et al. “Modellbasierte Und Experimentelle Charakterisierung von Intensiven Ultraschall-Stehwellenfeldern Für Die Zerstäubung Hochviskoser Flüssigkeiten.” DAGA 2019, 2019.
LibreCat
2019 | Journal Article | LibreCat-ID: 10334
Schemmel, Reinhard, et al. “Using Complex Multi-Dimensional Vibration Trajectories in Ultrasonic Bonding and Welding.” Sensors and Actuators A: Physical, vol. 295, 2019, pp. 653–62, doi:10.1016/j.sna.2019.04.025.
LibreCat
| DOI
2019 | Conference Paper | LibreCat-ID: 13460 |
Bender, Amelie, et al. “Remaining Useful Lifetime Prediction Based on Adaptive Failure Thresholds.” Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), edited by Michael Beer and Enrico Zio, no. 29, 2019, pp. 1262–69.
LibreCat
| Download (ext.)
2019 | Conference Paper | LibreCat-ID: 13461 |
Kaul, Thorben, et al. “Digital Twin for Reliability Analysis During Design and Operation of Mechatronic Systems.” Proceedings of the 29th European Safety and Reliability Conference (ESREL2019), edited by Michael Beer and Enrico Zio, no. 29, 2019, pp. 2340–47.
LibreCat
| Download (ext.)
2018 | Conference Paper | LibreCat-ID: 9987
Bender, Amelie, and Walter Sextro. “A Particle Filtering Approach for Temperature Based Prognostics.” Safety and Reliability – Safe Societies in a Changing World, 2018, pp. 1025–33.
LibreCat
2018 | Journal Article | LibreCat-ID: 9990
Dunst, Paul, et al. “Vibration Assisted Dosing, Mixing and Transport of Dry Fine Powders.” ACTUATOR 2018; 16th International Conference on New Actuators, 2018, pp. 142–45.
LibreCat
2018 | Journal Article | LibreCat-ID: 9991
Dunst, Paul, et al. “Vibration-Assisted Handling of Dry Fine Powders.” Actuators 2018, 7(2)., 2018, pp. 1–11, doi:10.3390/act7020018.
LibreCat
| DOI
2018 | Conference Paper | LibreCat-ID: 9992
Dymel, Collin, et al. “Numerical and Statistical Investigation of Weld Formation in a Novel Two-Dimensional Copper-Copper Bonding Process.” (Proceedings of 7th Electronics System-Integration Technology Conference, Dresden, Germany), 2018, pp. 1–6.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9993
Dymel, Collin, et al. “Experimental Investigations on the Impact of Bond Process Parameters in Two-Dimensional Ultrasonic Copper Bonding.” (Proceedings of 8th Electronics IEEE CPMT Symposium Japan (ICSJ 2018), Kyoto, Japan), 2018, pp. 41–44.
LibreCat
2018 | Book | LibreCat-ID: 9995
Meyer, Tobias, et al. Steigerung Der Intelligenz Mechatronischer Systeme. Vol. Steigerung der Verlässlichkeit technischer Systeme, Springer Nature Switzerland AG. Part of Springer Nature., 2018, pp. 193–213.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9997
Schemmel, Reinhard, et al. “Effects of Different Working Frequencies on the Joint Formation in Copper Wire Bonding.” CIPS 2018 - 10th International Conference on Integrated Power Electronics Systems (CIPS 2018), 2018, pp. 230–35.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9998
Schemmel, Reinhard, et al. “Numerical and Experimental Investigations in Ultrasonic Heavy Wire Bonding.” 6th European Conference on Computational Mechanics (ECCM 6), 2018, pp. 1–12.
LibreCat
2018 | Conference Paper | LibreCat-ID: 9999
Unger, Andreas, et al. “Intelligent Production of Wire Bonds Using Multi-Objective Optimization – Insights, Opportunities and Challenges.” In Proceedings of IMAPS 2018 – 51st Symposium on Microelectronics, Pasadena, CA, 2018, vol. Vol. 2018, No. 1, pp. 000572-000577., 2018, doi:10.4071/2380-4505-2018.1.000572.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 23560
Hentze, Julian, et al. “Integrated Modeling of Behavior and Reliability in System Development.” ICED17, 21ST INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, Nr. DS 87-USB, edited by Anja Maier et al., Design Society, 2017, pp. 385–94.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9969
Bender, Amelie, et al. “Entwicklung Eines Condition Monitoring Systems Für Gummi-Metall-Elemente.” Verlagsschriftenreihe Des Heinz Nixdorf Instituts Band 369, Paderborn, 2017, 2017, pp. 347–58.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9970
Bender, Amelie, et al. “Modellbasierte Prognose Der Nutzbaren Restlebensdauer von Gummi-Metall-Elementen.” 15. Internationale Schienenfahrzeugtagung, 2017, pp. 123–25.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9971
Bender, Amelie, et al. “Neuartiges Konzept Zur Lebensdauerprognose von Gummi-Metall-Elementen.” VDI-Berichte 2301, 2017, pp. 49–60.
LibreCat
2017 | Journal Article | LibreCat-ID: 9972
Dunst, Paul, et al. “Analysis of Pipe Vibration in an Ultrasonic Powder Transportationsystem.” Elsevier, vol. Sensors and Actuators A 263, 2017, pp. 733–36.
LibreCat
2017 | Journal Article | LibreCat-ID: 9973
Eichwald, Paul, et al. “Multi-Dimensional Ultrasonic Copper Bonding – New Challenges for Tool Design.” IMAPSource, vol. Vol. 2017, No. 1, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9974
Hentze, Julian, et al. “Integrated Modeling Og Behavior and Reliability in System Development.” ICED17, 21st International Conference on Enginieering Design, 2017, pp. 385–94.
LibreCat
2017 | Journal Article | LibreCat-ID: 9976
Kaul, Thorben, et al. “Formulation of Reliability-Related Objective Functions for Design of Intelligent Mechatronic Systems.” SAGE Journals, vol. Vol. 231(4), 2017, pp. 390–99, doi:10.1177/1748006X17709376.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 9978
Kimotho, James Kuria, et al. “Estimation of Remaining Useful Lifetime of Piezoelectric Transducers Based on Self-Sensing.” IEEE Transactions on Reliability, 2017, pp. 1–10, doi:10.1109/TR.2017.2710260.
LibreCat
| DOI
2017 | Conference Paper | LibreCat-ID: 9982
Schemmel, Reinhard, et al. “MoRFUS: Mobile Reinigungseinheit Für Förderketten Basierend Auf Ultraschall.” 43. Deutsche Jahrestagung Für Akustik, 2017, pp. 611–14.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9983
Schulze, Sebastian, et al. “Model Based Optimization of Dynamics in Adaptive Headlamps.” Proceedings of the 12th International Symposium on Automotive Lighting 2017, 2017.
LibreCat
2017 | Conference Paper | LibreCat-ID: 9985
Sextro, Walter, et al. “Entwicklung Verlässlicher, Intelligenter Systeme.” VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte., 2017, pp. 17–30.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9955
Althoff, Simon, et al. “Shape-Dependent Transmittable Tangential Force of Wire Bond Tools.” IEEE 66th Electronic Components and Technology Conference, 2016, pp. 2103–10, doi:10.1109/ECTC.2016.234.
LibreCat
| DOI
2016 | Journal Article | LibreCat-ID: 9957
Brökelmann, Michael, et al. “Kupferbondverbindungen Intelligent Herstellen.” Wt-Online, vol. 7/8, 2016, pp. 512–19.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9958
Dunst, Paul, et al. “Transportation of Dry Fine Powders by Coordinated Friction Manipulation.” PAMM Proc. Appl. Math. Mech. 16, 2016, pp. 635–36, doi:10.1002/pamm.201610306.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 9960
Eichwald, Paul, et al. “Micro Wear Modeling in Copper Wire Wedge Bonding.” IEEE CPMT Symposium Japan, 2016, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9961
Kaul, Thorben, et al. “Modeling of Complex Redundancy in Technical Systems with Bayesian Networks.” Proceedings of the Third European Conference of the Prognostics and Health Management Society 2016, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9963
Kohl, Sergej, et al. “Aspects of Flexible Viscoelastic Suspension Modeling for Frictional Rolling Contact Analysis Using ADAMS.” The 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV 2016), Cyberjaya, Malaysia, 2016., 2016, pp. 1–12.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9964
Lessmeier, Christian, et al. “Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification.” European Conference of the Prognostics and Health Management Society, 2016.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9966
Meyer , Tobias, et al. “Reliable Manufacturing of Heavy Copper Wire Bonds Using Online Parameter Adaptation.” IEEE 66th Electronic Components and Technology Conference, 2016, pp. 622–28, doi:10.1109/ECTC.2016.215.
LibreCat
| DOI
2016 | Conference Paper | LibreCat-ID: 9967
Schulze, Sebastian, et al. “Using Adequate Reduced Models for Flexible Multibody Systems of Automotive Mechatronic Systems.” 2nd International Conference on Automotive Innovation and Green Energy Vehicle (AiGEV) Malaysia 2016, 2016, pp. 1–11.
LibreCat
2016 | Conference Paper | LibreCat-ID: 9968
Unger, Andreas, et al. “Validated Simulation of the Ultrasonic Wire Bonding Process.” Wear Modeling in Copper Wire Wedge Bonding. IEEE CPMT Symposium Japan, 2016, 2016, pp. 251–54.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9943
Althoff, Simon, et al. “Improving the Cleaning Process in Copper Wire Bonding by Adapting Bonding Parameters.” 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6, doi:10.1109/EPTC.2015.7412402.
LibreCat
| DOI
2015 | Journal Article | LibreCat-ID: 9944
Bornmann, Peter, et al. “Kavitationsdetektion Mittels Self-Sensing-Ultraschallwandler.” Tm - Technisches Messen, vol. 82, no. 2, 2015, pp. 73–84, doi:10.1515/teme-2015-0017.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9945
Kaul, Thorben, et al. “Integrierte Modellierung Der Dynamik Und Der Verlässlichkeit Komplexer Mechatronischer Systeme.” 10. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, Universität Paderborn, 2015, pp. 101–12.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9946
Kaul, Thorben, et al. “Integrated Model for Dynamics and Reliability of Intelligent Mechatronic Systems.” European Safety and Reliability Conference (ESREL2015), edited by Podofillini et al.}, Taylor and Francis, 2015, doi:10.1201/b19094-290.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9947
Kimotho, James Kuria, and Walter Sextro. “Comparison and Ensemble of Temperature-Based and Vibration-Based Methods for Machinery Prognostics.” Annual Conference of the Prognostics and Health Management Society 2015, vol. 6, 2015.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9949
Meyer, Tobias, et al. “Advantages of Reliability-Adaptive System Operation for Maintenance Planning.” Proceedings of the 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes, 2015, pp. 940–45, doi:10.1016/j.ifacol.2015.09.647.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9950
Meyer, Tobias, et al. “Anforderungen an Condition-Monitoring-Verfahren Zur Nutzung Im Zuverläsigkeitsgeregelten Betrieb Adaptiver Systeme.” 27. Tagung Technische Zuverlässigkeit (TTZ 2015) - Entwicklung Und Betrieb Zuverlässiger Produkte, no. 2260, 2015, pp. 111–22.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9951
Meyer, Tobias, et al. “Modeling and Simulation of the Ultrasonic Wire Bonding Process.” 2015 17th Electronics Packaging Technology Conference, 2015, doi:10.1109/EPTC.2015.7412377.
LibreCat
| DOI
2015 | Conference Paper | LibreCat-ID: 9952
Schulte, Frank, et al. “A Mechanical Model for the Dynamical Contact of Elastic Rough Bodies with Viscoelastic Properties.” Proceedings of ICoEV 2015 International Conference on Engineering Vibration, 2015, pp. 1109–17.
LibreCat
2015 | Conference Paper | LibreCat-ID: 9954
Unger, Andreas, et al. “Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine and Reduce Tool Wear.” 2015 17th Electronics Packaging Technology Conference, 2015, doi:10.1109/EPTC.2015.7412375.
LibreCat
| DOI
2014 | Book | LibreCat-ID: 25168
Gausemeier, Jürgen, et al. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, 2014.
LibreCat
2014 | Book Chapter | LibreCat-ID: 25173
Dellnitz, Michael, et al. “Self-Optimizing Mechatronic Systems.” Dependability of Self-Optimizing Mechatronic Systems, Kapitel: 1.1, Springer-Verlag, 2014, pp. 3–12.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28394
Dorociak, Rafal, et al. “Development of the Active Guidance Module.” Dependability of Self-Optimizing Mechatronic Systems, AACE Press, 2014, pp. 178–82.
LibreCat
2014 | Book | LibreCat-ID: 28396
Gausemeier, J{\"u}rgen, et al. Dependability of Self-Optimizing Mechatronic Systems. Springer-Verlag, Heidelberg, Germany, 2014.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28399
Dorociak, Rafal, et al. “Selecting Suitable Methods Using the Methodology.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–78.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28400
Dorociak, Rafal, et al. “Selecting Suitable Methods Using the Methodology.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag Berlin Heidelberg, 2014, pp. 174–78.
LibreCat
2014 | Book Chapter | LibreCat-ID: 28410
Iwanek, Peter, et al. “Challenges.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2014, pp. 12–15.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9868
Althoff, Simon, et al. “Improving the Bond Quality of Copper Wire Bonds Using a Friction Model Approach.” Electronic Components and Technology Conference (ECTC), 2014 IEEE 64th, 2014, pp. 1549–55, doi:10.1109/ECTC.2014.6897500.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9869
Bornmann, Peter, et al. “Self-Sensing Ultrasound Transducer for Cavitation Detection.” 2014 IEEE International Ultrasonics Symposium Proceedings, 2014, pp. 663–66, doi:10.1109/ULTSYM.2014.0163.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9871
Eichwald, Paul, et al. “Analysis Method of Tool Topography Change and Identification of Wear Indicators for Heavy Copper Wire Wedge Bonding.” Proceedings of the 47th International Symposium on Microelectronics, 2014, pp. 856–61, doi:10.4071/isom-THP34.
LibreCat
| DOI
2014 | Book | LibreCat-ID: 9873
Gausemeier, Jürgen, et al. Dependability of Self-Optimizing Mechatronic Systems. Vol. Lecture Notes in Mechanical Engineering, Springer Berlin Heidelberg, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 9874
Hemsel, Tobias, et al. “Reliability Analysis of Ultrasonic Power Transducers.” Archive of Applied Mechanics, Springer Berlin Heidelberg, 2014, pp. 1–7, doi:10.1007/s00419-014-0965-4.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9876
Hunstig, Matthias, et al. “High-Velocity Operation of Piezoelectric Inertia Motors: Experimental Validation.” Archive of Applied Mechanics, Springer Berlin Heidelberg, 2014, pp. 1–9, doi:10.1007/s00419-014-0940-0.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9879
Kimotho, James Kuria, et al. “PEM Fuel Cell Prognostics Using Particle Filter with Model Parameter Adaptation.” Prognostics and Health Management (PHM), 2014 IEEE Conference On, 2014, pp. 1–6, doi:10.1109/ICPHM.2014.7036406.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9880
Kimotho, James Kuria, and Walter Sextro. “An Approach for Feature Extraction and Selection from Non-Trending Data for Machinery Prognosis.” Proceedings of the Second European Conference of the Prognostics and Health Management Society 2014, vol. 5, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 9881
Kimotho, James Kuria, and Walter Sextro. “Optimal Parameter Tuning for Multiclass Support Vector Machines in Machinery Health State Estimation.” PAMM, vol. 14, no. 1, WILEY-VCH Verlag, 2014, pp. 815–16, doi:10.1002/pamm.201410388.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9882
Kohl, Sergej, et al. “Tire Footprint Analysis Depending on the Elastokinematics of a Multi-Link Suspension System Using Multi-Body Dynamics Simulation.” PAMM, vol. 14, no. 1, WILEY-VCH Verlag, 2014, pp. 65–66, doi:10.1002/pamm.201410020.
LibreCat
| DOI
2014 | Book Chapter | LibreCat-ID: 9883
Meyer, Tobias, et al. “Conclusion and Outlook.” Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier et al., Springer Berlin Heidelberg, 2014, pp. 189–90, doi:10.1007/978-3-642-53742-4_5.
LibreCat
| DOI
2014 | Journal Article | LibreCat-ID: 9885
Meyer , Tobias, et al. “Method to Identify Dependability Objectives in Multiobjective Optimization Problem.” Conference Proceedings of the 2nd International Conference on System-Integrated Intelligence, vol. 15, 2014, pp. 46–53, doi:10.1016/j.protcy.2014.09.033.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9887
Neuhaus, Jan, and Walter Sextro. “Thermo-Mechanical Model for Wheel Rail Contact Using Coupled Point Contact Elements.” Proceedings of the 5th International Conference on Computational Methods, edited by G.R. Liu and Z.W. Guan, ScienTech Publisher, 2014.
LibreCat
2014 | Journal Article | LibreCat-ID: 9888
Schulze, Sebastian, et al. “Contact Modeling in Multibody Systems with Elastic Bodies in High-Frequency Applications.” PAMM, vol. 14, no. 1, WILEY-VCH Verlag, 2014, pp. 39–40, doi:10.1002/pamm.201410012.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9889
Sprock, Christian, and Walter Sextro. “Time-Efficient Dynamic Analysis of Structures Exhibiting Nonlinear Peak Bending.” Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2014 IEEE International, 2014, pp. 320–24, doi:10.1109/I2MTC.2014.6860760.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9890
Sprock, Christian, and Walter Sextro. “Time-Efficient Analysis of Nonlinear Dynamic Behavior.” Proceedings in Applied Mathematics and Mechanics 14 (2014), Nr. 1, 2014, pp. 293–94.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9891
Sprock, Christian, and Walter Sextro. “Time-Efficient Analysis of Nonlinear Peak Bending Behavior.” Proceedings of ISMA - International Conference of Noise and Vibration. 2014, 2014, pp. 1–8.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9892
Sprock, Christian, and Walter Sextro. “Vibration Analysis of Mechanical Structures Using Multisine Excitation Techniques.” Proceedings of 31st Danubia-Adria Symposium. 2014, 2014.
LibreCat
2014 | Book Chapter | LibreCat-ID: 9893
Trächtler, Ansgar, et al. “Introduction to Self-Optimization and Dependability.” Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier et al., Springer Berlin Heidelberg, 2014, pp. 1–24, doi:10.1007/978-3-642-53742-4_1.
LibreCat
| DOI
2014 | Book Chapter | LibreCat-ID: 9894
Trächtler, Ansgar, et al. “Case Study.” Dependability of Self-Optimizing Mechatronic Systems, edited by Jürgen Gausemeier et al., Springer Berlin Heidelberg, 2014, pp. 173–88, doi:10.1007/978-3-642-53742-4_4.
LibreCat
| DOI
2014 | Conference Paper | LibreCat-ID: 9895
Unger, Andreas, et al. “Experimental and Numerical Simulation Study of Pre-Deformed Heavy Copper Wire Wedge Bonds.” Proceedings of the 47th International Symposium on Microelectronics (IMAPS), 2014, pp. 289–94.
LibreCat
2014 | Conference Paper | LibreCat-ID: 9896
Unger, Andreas, et al. “Data-Driven Modeling of the Ultrasonic Softening Effect for Robust Copper Wire Bonding.” Proceedings of 8th International Conference on Integrated Power Electronic Systems, vol. 141, 2014, pp. 175–80.
LibreCat
2013 | Conference Paper | LibreCat-ID: 26973
Meyer, Tobias, et al. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
2013 | Book Chapter | LibreCat-ID: 23139
Kessler, Jan Henning, et al. “Increasing the Dependability of Self-Optimizing Systems During Operation Using the Multi-Level Dependability Concept.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 55–62.
LibreCat
2013 | Conference Paper | LibreCat-ID: 23140
Meyer, Tobias, et al. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” The Annual Reliability and Maintainability Symposium (RAMS), 2013.
LibreCat
2013 | Book Chapter | LibreCat-ID: 23149
Hölscher, Christian, et al. “Applications of Self-Optimizing Systems.” Dependability of Self-Optimizing Mechatronic Systems, Springer-Verlag, Heidelberg, Germany, 2013, pp. 16–22.
LibreCat
2013 | Journal Article | LibreCat-ID: 9794
Al-Ashtari, Waleed, et al. “Increasing the Power of Piezoelectric Energy Harvesters by Magnetic Stiffening.” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, 2013, pp. 1332–42, doi:10.1177/1045389X13483021.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9795
Al-Ashtari, Waleed, et al. “Enhanced Energy Harvesting Using Multiple Piezoelectric Elements: Theory and Experiments.” Sensors and Actuators A: Physical, vol. 200, 2013, pp. 138–46, doi:10.1016/j.sna.2013.01.008.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9796
Al-Ashtari, Waleed, et al. “Characteristics of Piezoelectric Energy Harvesters in Autonomous Systems.” Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, Hannover, Germany, 14.-17.7.2013, no. 05/2013, 2013, pp. 159–61.
LibreCat
2013 | Conference Paper | LibreCat-ID: 9797
Althoff, Simon, et al. “A Friction Based Approach for Modeling Wire Bonding.” IMAPS 2013, 46th International Symposium on Microelectronics, 2013, doi:10.4071/isom-2013-TA67.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9799
Eichwald, Paul, et al. “Influences of Bonding Parameters on the Tool Wear for Copper Wire Bonding.” 15th Electronics Packaging Technology Conference, 2013, doi:10.1109/EPTC.2013.6745803.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9801
Hunstig, Matthias, et al. “Leistungs- Und Bandbreitensteigerung von Energy-Harvesting-Generatoren Für Energieautarke Systeme.” 9. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, Universität Paderborn, 2013, pp. 359–72.
LibreCat
2013 | Conference Paper | LibreCat-ID: 9802
Hunstig, Matthias, et al. “High-Velocity Slip-Slip Operation of Piezoelectric Inertia Motors - Experimental Validation.” Proceedings of 10th International Workshop on Piezoelectric Materials and Applications and 8th Energy Harvesting Workshop, 2013, pp. 16–18.
LibreCat
2013 | Journal Article | LibreCat-ID: 9803
Hunstig, Matthias, et al. “Modelling the Friction Contact in an Inertia Motor.” Journal of Intelligent Material Systems and Structures, vol. 24, no. 11, 2013, pp. 1380–91, doi:10.1177/1045389X12474354.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9804
Hunstig, Matthias, et al. “Stick-Slip and Slip-Slip Operation of Piezoelectric Inertia Drives - Part II: Frequency-Limited Excitation.” Sensors and Actuators A: Physical, vol. 200, 2013, pp. 79–89, doi:10.1016/j.sna.2012.11.043.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9805
Hunstig, Matthias, et al. “Stick-Slip and Slip-Slip Operation of Piezoelectric Inertia Drives - Part I: Ideal Excitation.” Sensors and Actuators A: Physical, vol. 200, 2013, pp. 90–100, doi:10.1016/j.sna.2012.11.012.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9807
Kimotho, James Kuria, et al. “Machinery Prognostic Method Based on Multi-Class Support Vector Machines and Hybrid Differential Evolution -- Particle Swarm Optimization.” Chemical Engineering Transactions, vol. 33, 2013, pp. 619–24, doi:10.3303/CET1333104.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9808
Kimotho, James Kuria, et al. “Application of Event Based Decision Tree and Ensemble of Data Driven Methods for Maintenance Action Recommendation.” International Journal of Prognostics and Health Management, vol. 4, no. 2, 2013.
LibreCat
2013 | Conference Paper | LibreCat-ID: 9855
Kohl, Sergej, et al. “Modelbased Investigations of Gyroscopic Effect on the (Elasto-)Kinematics of Suspension Systems.” Proc. Appl. Math. Mech., vol. 13, 2013, pp. 23–24, doi:10.1002/pamm.201310007.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9858
Meyer, Tobias, et al. “Multiobjective Optimization Including Safety of Operation Applied to a Linear Drive System.” Proc. Appl. Math. Mech., vol. 13, 2013, pp. 483–84, doi:10.1002/pamm.201310234.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9859
Meyer , Tobias, et al. “Increasing Intelligent Systems’ Reliability by Using Reconfiguration.” Proceedings of the Annual Reliability and Maintainability Symposium (RAMS), 2013, doi:10.1109/RAMS.2013.6517636.
LibreCat
| DOI
2013 | Journal Article | LibreCat-ID: 9860
Meyer, Tobias, et al. “Controlling the Remaining Useful Lifetime Using Self-Optimization.” Chemical Engineering Transactions, vol. 33, 2013, pp. 625–30, doi:10.3303/CET1333105.
LibreCat
| DOI
2013 | Conference Paper | LibreCat-ID: 9861
Meyer, Tobias, et al. “Bewertung Der Zuverlässigkeit Selbstoptimierender Systeme Mit Dem LARES-Framework.” 9. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, Universität Paderborn, 2013, pp. 161–74.
LibreCat
2012 | Journal Article | LibreCat-ID: 9781
Al-Ashtari, Waleed, et al. “Frequency Tuning of Piezoelectric Energy Harvesters by Magnetic Force.” Smart Materials and Structures, vol. 21, no. 3, 2012, p. 035019.
LibreCat
2012 | Journal Article | LibreCat-ID: 9782
Al-Ashtari, Waleed, et al. “Analytical Determination of Characteristic Frequencies and Equivalent Circuit Parameters of a Piezoelectric Bimorph.” Journal of Intelligent Material Systems and Structures, vol. 23, no. 1, 2012, pp. 15–23, doi:10.1177/1045389X11430742.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 9783
Bornmann, Peter, et al. “Non-Perturbing Cavitation Detection / Monitoring in Sonochemical Reactors.” Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–44, doi:10.1109/ULTSYM.2012.0284.
LibreCat
| DOI
2012 | Conference Paper | LibreCat-ID: 9787
Kohl, Sergej, et al. “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung Basierend Auf Einer Neuen Auslegungstheorie.” 8. Tag Des Fahrwerks, Aachen, 2012, 2012, pp. 38–60.
LibreCat
2012 | Conference Paper | LibreCat-ID: 9791
Sondermann-Wölke , Christoph, et al. “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System Based on Its Principle Solution.” Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012), 2012.
LibreCat
2012 | Journal Article | LibreCat-ID: 9806
Hunstig, Matthias, et al. “Analysis of Different Operation Modes for Inertia Motors.” ACTUATOR 2012 Conference Proceedings, 2012, pp. 761–64.
LibreCat
2011 | Conference Paper | LibreCat-ID: 26981
Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” Technische Zuverlässigkeit TTZ, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 23184
Lurye, Oleg, et al. “Verlässlichkeitsanalyse Des Degradationsverhaltens Mechatronischer Systeme Mit Mehreren Betriebsstrategien.” VDI Bericht Zur Tagung Technische Zuverlässigkeit, VDI-Verlag, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 23194
Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” Technische Zuverlässigkeit TTZ, 2011.
LibreCat
2011 | Conference Paper | LibreCat-ID: 9768
Lurie, Oleg, et al. “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies.” 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 2011, pp. 99–110.
LibreCat
2011 | Conference Paper | LibreCat-ID: 9771
Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, 2011, pp. 291–302.
LibreCat
2011 | Journal Article | LibreCat-ID: 9772
Tomberger, Christoph, et al. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.” Wear, vol. 271, 2011, pp. 2–12, doi:10.1016/j.wear.2010.10.025.
LibreCat
| DOI
2011 | Patent | LibreCat-ID: 9790
Sextro, Walter, et al. Patent DE10201003395: Anordnung Und Verfahren Zur Mehrdimensionalen Messung von Schwingungen Eines Objekts. . 2011.
LibreCat
2010 | Journal Article | LibreCat-ID: 9747
Hölzl, Johannes Sebastian, and Walter Sextro. “Reibungsdämpfung in Ausgedehnten, Verschraubten Fügestellen.” PAMM, vol. 10, no. 1, WILEY-VCH Verlag, 2010, pp. 247–48, doi:10.1002/pamm.201010116.
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9748
Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.” SAE International Journal of Passenger Cars- Mechanical Systems, 2010, pp. 929–35, doi:10.4271/2010-01-1422.
LibreCat
| DOI
2010 | Conference Paper | LibreCat-ID: 9753
Hunstig, Matthias, et al. “Anregungskonzepte Und Modellierung Piezoelektrischer Trägheitsmotoren.” 7. Paderborner Workshop Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., vol. 272, Heinz Nixdorf Institut, Universität Paderborn, 2010, pp. 129–41.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9754
Hunstig, Matthias, et al. “Improving the Performance of Piezoelectric Inertia Motors.” ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–61.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9760
Sondermann-Wölke, Christoph, et al. “Guideline for the Dependability-Oriented Design of Self-Optimizing Systems.” Industrial Informatics (INDIN), 2010 8th IEEE International Conference On, 2010, pp. 739–44, doi:10.1109/INDIN.2010.5549490.
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9761
Sondermann-Wölke, Christoph, and Walter Sextro. “Integration of Condition Monitoring in Self-Optimizing Function Modules Applied to the Active Railway Guidance Module.” International Journal On Advances in Intelligent Systems, vol. 3, no. 1–3, 2010, pp. 65–74.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9762
Sondermann-Wölke, Christoph, et al. “Experimentelle Untersuchung Der Selbstoptimierung Innerhalb Des RailCab-Spurführungsmoduls.” Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier et al., vol. 272, 2010, pp. 411–20.
LibreCat
2010 | Conference Paper | LibreCat-ID: 9763
Sondermann-Wölke, Christoph, et al. “Increasing the Reliability of a Self-Optimizing Railway Guidance System.” Reliability and Maintainability Symposium (RAMS), 2010 Proceedings - Annual, 2010, pp. 1–6, doi:10.1109/RAMS.2010.5448080.
LibreCat
| DOI
2010 | Journal Article | LibreCat-ID: 9764
Tomberger, Christoph, et al. “Einfluss von Oberflächenrauheit, Fluiden Zwischenschichten Und Kontakttemperaturen Auf Den Kraftschluss Zwischen Rad Und Schiene.” ZEVrail, vol. 134, 2010, pp. 127–35.
LibreCat
2009 | Conference Paper | LibreCat-ID: 9742
Sondermann-Wölke, Christoph, and Walter Sextro. “Towards the Integration of Condition Monitoring in Self-Optimizing Function Modules.” Future Computing, Service Computation, Cognitive, Adaptive, Content, Patterns, 2009. COMPUTATIONWORLD ’09. Computation World:, 2009, pp. 15–20, doi:10.1109/ComputationWorld.2009.47.
LibreCat
| DOI
2007 | Conference Paper | LibreCat-ID: 9560
Tonchev, Anton, et al. “Modellierung Der Hysterese- Und Adhäsionseffekte Zwischen Bremsbelag Und Bremsscheibe.” 27. Internationales Mju-Symposium/Bremsen-Fachtagung, no. 657, VDI Verlag GmbH, 2007, pp. 29–49.
LibreCat
2007 | Conference Paper | LibreCat-ID: 9561
Tonchev, Anton, et al. “Modelling of Hysteresis and Adhesion Effects between Brake Pad and Disc.” 27. Internationales Mju-Symposium/Bremsen-Fachtagung, no. 657, VDI Verlag GmbH, 2007, pp. 144–63.
LibreCat
2007 | Conference Paper | LibreCat-ID: 9563
Genzo, Alexander, et al. “Schwingungsverhalten Elastischer Körper Mit Nichtlinearen Kopplungen in Ausgedehnten Reibkontakten.” VDI-Berichte, vol. 2022, VDI Verlag GmbH, 2007, pp. 147–61.
LibreCat
2007 | Journal Article | LibreCat-ID: 9567
Szwedowicz, J., et al. “On Nonlinear Forced Vibration of Shrouded Turbine Blades.” Journal of Turbomachinery, vol. 130, no. 1, 2007, pp. 011002–011002.
LibreCat
2006 | Conference Paper | LibreCat-ID: 9535
Genzo, Alexander, and Walter Sextro. “Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts.” Proceedings of ISMA - International Conference on Noise and Vibration Engineering, 2006, pp. 51–52.
LibreCat
2006 | Book Chapter | LibreCat-ID: 9536
Gutzeit, F., et al. “Unsteady Rolling Contact of Rubber Wheels.” Analysis and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst, vol. 27, Springer Berlin Heidelberg, 2006, pp. 261–70, doi:10.1007/3-540-31761-9_29.
LibreCat
| DOI
2006 | Conference Paper | LibreCat-ID: 9542
Hofmeisterro, Adolf, et al. “Error-Workspace Analysis of Plane Mechanisms.” Proceedings of EUCOMES, the First European Conference on Mechanism Science, 2006, pp. 1–12.
LibreCat
2006 | Book Chapter | LibreCat-ID: 9551
Sextro, Walter, et al. “Contact Behaviour of a Sliding Rubber Element.” Analysis and Simulation of Contact Problems, edited by Peter Wriggers and Udo Nackenhorst, vol. 27, Springer Berlin Heidelberg, 2006, pp. 243–52, doi:10.1007/3-540-31761-9_27.
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9266
Genzo, Alexander, et al. “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM, vol. 5, no. 1, WILEY-VCH Verlag, 2005, pp. 91–92, doi:10.1002/pamm.200510026.
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9526
Genzo, Alexander, et al. “Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM, vol. 5, no. 1, WILEY-VCH Verlag, 2005, pp. 91–92, doi:10.1002/pamm.200510026.
LibreCat
| DOI
2005 | Journal Article | LibreCat-ID: 9529
Hofmeister, Adolf, et al. “Unkontrollierbare Bewegungen Ebener Mechanismen Mit Gelenkspiel.” PAMM, vol. 5, no. 1, WILEY-VCH Verlag, 2005, pp. 201–02, doi:10.1002/pamm.200510078.
LibreCat
| DOI
2004 | Conference Paper | LibreCat-ID: 8952
Götting, Florian, et al. “Systematic Mistuning of Bladed Disk Assemblies with Friction Contacts.” Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, vol. 6, no. GT2004-53310, 2004, pp. 257–67.
LibreCat
2004 | Journal Article | LibreCat-ID: 9520
Lindner, Markus, et al. “Hysteretic Friction of a Sliding Rubber Element.” PAMM, vol. 4, no. 1, WILEY-VCH Verlag, 2004, pp. 101–02, doi:10.1002/pamm.200410032.
LibreCat
| DOI
2004 | Conference Paper | LibreCat-ID: 9523
Panning, Lars, et al. “Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application.” Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, vol. 6, no. GT2004-53316, 2004, pp. 269–80, doi:10.1115/GT2004-53316.
LibreCat
| DOI
2003 | Conference Paper | LibreCat-ID: 8933
Götting, Florian, et al. “Schwingungsverhalten von Verstimmten Beschaufelungen Mit Reibelementen.” Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Darmstadt, edited by H Irretier et al., Vieweg-Verlag, 2003, pp. 201–10.
LibreCat
2003 | Journal Article | LibreCat-ID: 8934
Genzo, Alexander, et al. “Erzwungene Schwingungen von Elastischen Mehrkörpersystemen Mit Reibkontakten.” PAMM, vol. 2, no. 1, WILEY-VCH Verlag, 2003, pp. 120–21, doi:10.1002/pamm.200310046.
LibreCat
| DOI
2003 | Journal Article | LibreCat-ID: 8937
Panning, Lars, et al. “Design of Friction Dampers for Mistuned Bladed Disks.” PAMM, vol. 3, no. 1, WILEY-VCH Verlag, 2003, pp. 118–19, doi:10.1002/pamm.200310336.
LibreCat
| DOI
2003 | Journal Article | LibreCat-ID: 8938
Panning, Lars, et al. “Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers.” International Journal of Rotating Machinery, vol. 9, no. 3, Hindawi Publishing Corporation, 2003, pp. 219–28.
LibreCat
2003 | Journal Article | LibreCat-ID: 8939
Popp, Karl, et al. “Vibration Damping by Friction Forces -Theory and Applications.” Journal of Vibration and Control, vol. 9, 2003, pp. 419–48.
LibreCat
2003 | Conference Paper | LibreCat-ID: 8940
Sextro, Walter, and Karl Popp. “Optimierung Des Schwingungsverhaltens Elastischer Strukturen Mit Reibfugen Am Beispiel von Turbomaschinenschaufeln.” Forschungsvereinigung Verbrennungskraftmaschinen (FW), no. 753, 2003, p. 40.
LibreCat
2003 | Conference Paper | LibreCat-ID: 8941
Szwedowicz, J., et al. “On Forced Vibration of Shrouded Turbine Blades.” ASME Turbo Expo 2003, Collocated with the 2003 International Joint Power Generation Conference, no. GT2003-38808, 2003, doi:doi:10.1115/GT2003-38808.
LibreCat
| DOI
2002 | Conference Paper | LibreCat-ID: 8928
Panning, Lars, et al. “Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction Damping.” Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, no. GT-2002-30429, 2002.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8929
Panning, Lars, et al. “Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge-Shaped Friction Dampers.” Proceedings of the 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC, 2002.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8931
Sextro, Walter, et al. “Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts.” Proceedings of ASME TURBO Expo, Power for Land, Sea, and Air, no. GT-2002-30427, 2002.
LibreCat
2002 | Conference Paper | LibreCat-ID: 8932
Sextro, Walter, and Karl Popp. “Optimierung Des Schwingungsverhaltens Elastischer Strukturen Mit Reibfugen.” Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, no. 518, 2002, pp. 157–83.
LibreCat
2001 | Conference Paper | LibreCat-ID: 8921
Panning, Lars, et al. “Schwingungsanalyse Verstimmter Schaufelkränze Mit Reibelementen.” Schwingungen in Rotierenden Maschinen VI SIRM, Referate Der Tagung in Wien, edited by H Irretier et al., Vieweg-Verlag, 2001, pp. 297–306.
LibreCat
2001 | Journal Article | LibreCat-ID: 8922
Sextro, Walter. “Heat and Wear Generation for Rolling Contacts.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), vol. 81, 2001, pp. 225–26.
LibreCat
2001 | Conference Paper | LibreCat-ID: 8923
Sextro, Walter. “Development and Experimental Validation of a Point Contact Model for Dynamical Problems with Friction.” ASME Design Engineering Technical Conferences, no. DETC2001/VIB-21512, 2001, pp. 1–12.
LibreCat
2001 | Journal Article | LibreCat-ID: 8924
Sextro, Walter, et al. “Localization in Nonlinear Mistuned Systems with Cyclic Symmetry.” Nonlinear Dynamics, vol. 25, no. 1–3, Kluwer Academic Publishers, 2001, pp. 207–20, doi:10.1023/A:1012915002568.
LibreCat
| DOI
2000 | Journal Article | LibreCat-ID: 8918
Krzyzynski, Tomasz, et al. “On Some Regularities in Dynamic Response of Cyclic Periodic Structures.” Chaos, Solitons \& Fractals, vol. 11, no. 10, 2000, pp. 1597–609, doi:10.1016/S0960-0779(99)00080-6.
LibreCat
| DOI
2000 | Conference Paper | LibreCat-ID: 8919
Panning, Lars, et al. “Optimization of Interblade Friction Damper.” International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 2000, pp. 1–8.
LibreCat
2000 | Conference Paper | LibreCat-ID: 8920
Sextro, Walter. “The Calculation of the Forced Response of Shrouded Blades with Friction Contacts and Its Experimental Verification.” International Gas Turbine \& Aeroengine Congress \& Exhibition, ASME, 2000, pp. 1–8.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8909
Popp, Karl, and Walter Sextro. “Schwingungsanalyse von Vorgespannten Schaufeln Mit Deckplatten Im Schaufelkranz.” Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, no. 504, 1999, pp. 21–38.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8910
Sextro, Walter. “Experimental Verification of a Non-Hertzian Contact Model.” International Conference on Computational Methods in Contact Mechanics, 1999, pp. 181–90.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8911
Sextro, Walter. “Forced Vibration of Elastic Structures with Friction Contacts.” ASME Design Engineering Technical Conferences, no. DETC99/VIB-8180, 1999, pp. 1–10.
LibreCat
1999 | Journal Article | LibreCat-ID: 8912
Sextro, Walter, and Karl Popp. “Ein Ebenes Reibkontaktmodell Zur Berechnung von Schaufelschwingungen Mit Reibelementen.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), vol. 79, 1999, pp. 311–12.
LibreCat
1999 | Conference Paper | LibreCat-ID: 8913
Sextro, Walter, and Karl Popp. “Schwingungsanalyse von Vorgespannten Schaufeln Mit Deckplatten Im Schaufelkranz.” Forschungsvereinigung Verbrennungskraftmaschinen (FW), no. 686, 1999, p. 56.
LibreCat
1998 | Conference Paper | LibreCat-ID: 8907
Sextro, Walter, et al. “Vibrational Behaviour of Tuned and Detuned Bladed Disks with Friction Dampers.” International Congress on Combustion Engines, Proceedings of the 22nd CIMAC, vol. 1, 1998, pp. 257–70.
LibreCat
1998 | Conference Paper | LibreCat-ID: 8908
Sextro, Walter, et al. “Three-Dimensional Vibration of Bladed Disk Assemblies with Friction Dampers.” The 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Proceedings of ISROMAC-7, vol. B, 1998, pp. 621–30.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8902
Popp, Karl, and Walter Sextro. “Schwingungsverhalten von Verstimmten Beschaufelungen Mit Reibelementen.” Forschungsvereinigung Verbrennungskraftmaschinen (FW) -Lnformationstagung Turbinen, no. 496, 1997, pp. 131–42.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8903
Sextro, Walter. “Schwingungsverhalten von Schaufelkränzen Mit Reibelementen Bei Frequenzverstimmung.” VDI-Reihe, vol. 11, no. 245, VDI-Verlag, Düsseldorf, 1997.
LibreCat
1997 | Conference Paper | LibreCat-ID: 8904
Sextro, Walter, et al. “Improved Reliability of Bladed Disks Due to Friction Dampers.” The 1997 International Gas Turbine \& Aeroengine Congress \& Exposition, 1997.
LibreCat
1996 | Conference Paper | LibreCat-ID: 8896
Popp, Karl, and Walter Sextro. “Schwingungsverhalten Eines Schaufelkranzes Mit Reibelementen Bei Frequenzverstimmung.” Forschungsvereinigung Verbrennungskraftmaschinen (FW) - Lnformationstagung Turbinen, no. 490, 1996, pp. 53–76.
LibreCat
1996 | Conference Paper | LibreCat-ID: 8897
Popp, Karl, and Walter Sextro. “Dynamical Behaviour of a Bladed Disk with Friction Dampers.” The 2nd European Nonlinear Oscillation Conference - Proceedings of EUROMECH, vol. 1, no. 518, 1996, pp. 157–83.
LibreCat
1993 | Journal Article | LibreCat-ID: 8895
Sextro, Walter, and B. Schmalhorst. “Static Behaviour of Drill Strings in Curved Boreholes.” Zeitschrift Für Angewandte Mathematik Und Mechanik (ZAMM), vol. 73, 1993, pp. 255–57.
LibreCat
1991 | Book Chapter | LibreCat-ID: 8894
Stelter, Peter, and Walter Sextro. “Bifurcations in Dynamic Systems with Dry Friction.” Bifurcation and Chaos: Analysis, Algorithms, Applications, edited by R. Seydel et al., vol. 97, Birkhäuser Basel, 1991, pp. 343–47, doi:10.1007/978-3-0348-7004-7_44.
LibreCat
| DOI